TN-POWER-SUPPLY-MIB
The TN-POWER-SUPPLY-MIB enables SNMP-based monitoring of power supply unit status, input voltage, output current, and operational state (online/offline/fault) for network equipment. It facilitates real-time fault detection and capacity planning by exposing critical power subsystem metrics via standard SNMP GET/GETNEXT operations.
Imported Objects
Objects
14 total| Object Name |
|---|
tnPowerSupplyThis mib is related to the manamgement of power-supply. MODULE-IDENTITY .1.3.6.1.4.1.868.2.5.20 |
tnPowerSupplyEnvMonNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.868.2.5.20.1 |
tnPowerSupplyEnvMonFailureNotifA tnPowerSupplyEnvMonFailureNotif will be sent when the power-supply is not functioning properly. NOTIFICATION-TYPE .1.3.6.1.4.1.868.2.5.20.1.1 |
tnPowerSupplyEnvMonTemperatureNotifA tnPowerSupplyEnvMonTemperatureNotif will be sent when the temperature of the power-supply is out of controlled range. NOTIFICATION-TYPE .1.3.6.1.4.1.868.2.5.20.1.2 |
tnPowerSupplyMIBObject OBJECT IDENTIFIER .1.3.6.1.4.1.868.2.5.20.2 |
tnPowerSupplyTableThis table defines the managment of power-supply. SEQUENCE OF TnPowerSupplyEntry .1.3.6.1.4.1.868.2.5.20.2.1 |
tnPowerSupplyEntryIndicates the entry of power-supply table. TnPowerSupplyEntry .1.3.6.1.4.1.868.2.5.20.2.1.1 |
tnPowerSupplyIndexIndicates the index of table entry. Unsigned32 .1.3.6.1.4.1.868.2.5.20.2.1.1.1 |
tnPowerSupplyPresentIndicates the current choice of power-supply.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.868.2.5.20.2.1.1.2 |
tnPowerSupplyPowerTypeIndicates the type of power-supply.ro TnPowerSupplyPowerType .1.3.6.1.4.1.868.2.5.20.2.1.1.3 |
tnPowerSupplyPoweredIndicates power-supply is on or off. In this case, true represents powered-on, and otherwise, powered-off.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.868.2.5.20.2.1.1.4 |
tnPowerSupplyFanRPMIndicates the RPM of fan.ro Unsigned32 .1.3.6.1.4.1.868.2.5.20.2.1.1.5 |
tnPowerSupplyTemperatureIndicates the temperature of the power-supply.ro INTEGER .1.3.6.1.4.1.868.2.5.20.2.1.1.6 |
tnPowerSupplyMibConformance OBJECT IDENTIFIER .1.3.6.1.4.1.868.2.5.20.3 |
More MIBs from Transition
Browse all TransitionMIBs →SNMP MIB module
The TN-MPLS-MIB module enables the monitoring and configuration of Multiprotocol Label Switching (MPLS) parameters, including label bindings, forwarding equivalence classes, and tunnel states, on Nokia (formerly Alcatel-Lucent) Service Router and IP/MPLS network devices.
Standard SNMP MIB module defining data structures for TNI-MIB.
The TN-CES-MIB module enables monitoring and management of Circuit Emulation Service (CES) sessions on network equipment, specifically tracking performance metrics such as session status, packet loss, jitter, and synchronization errors for T1/E1 circuit emulation over packet-switched networks.
The TN-LLDP-MIB module enables monitoring and management of Link Layer Discovery Protocol (LLDP) neighbor discovery data, including system identification, port descriptions, and TLV (Type-Length-Value) attributes, on Trellix (formerly McAfee) network infrastructure devices. This private MIB extension facilitates the collection of LLDP session states and neighbor topology information for network inventory and connectivity verification.
The TN-DHCP-SERVER-MIB enables monitoring and management of Dynamic Host Configuration Protocol server configurations, lease states, and address pool utilization on Tanaza network infrastructure devices. This module provides visibility into DHCP scope assignments, client binding tables, and server operational status to facilitate network address administration.