TN-PORT-MIB
AI MIB Summary
The TN-PORT-MIB module enables SNMP-based provisioning and management of physical port interfaces and associated hardware components on Nokia 7x50 series devices. It provides granular control over port configuration parameters and operational status for network interface monitoring and maintenance.
This document is the SNMP MIB module to manage and provision the hardware components of the Nokia 7x50 device. This SNMP MIB module (Specification) embodies Nokia's proprietary intellectual property. Nokia retains all title and ownership in the Specification, including any revisions. Nokia grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Nokia products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Nokia makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
Main OID:
tnPortMIBModule.1.3.6.1.4.1.7483.5.1.3.25
177
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
177 total| Object Name |
|---|
tnPortMIBModuleThis document is the SNMP MIB module to manage and provision the hardware components of the Nokia 7x50 device. This SNMP MIB module (Specification) embodies Nokia's proprietary intellectual property. Nokia retains all title and ownership in the Specification, including any revisions. Nokia grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Nokia products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Nokia makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. MODULE-IDENTITY .1.3.6.1.4.1.7483.5.1.3.25 |
tnHwObjs OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.1.2.2 |
tnPortObjs OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.1.2.2.4 |
tnPortTableLastChangeThe value of sysUpTime when the tnPortTable was last changed.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.7483.6.1.2.2.4.1 |
tnPortTableThe port table has an entry for each port on each IOM card in each chassis in the TMNX system. SEQUENCE OF TmnxPortEntry .1.3.6.1.4.1.7483.6.1.2.2.4.2 |
tnPortEntryEach row entry represents a port on a IOM card in a chassis in the system. Entries cannot be created and deleted via SNMP SET operations. Before an IOM tmnxMDAEntry can be deleted from the tmnxMDATable, its supported tnPortEntry rows must be in the proper state for removal. TmnxPortEntry .1.3.6.1.4.1.7483.6.1.2.2.4.2.1 |
tnPortPortIDtnPortPortID is an index into this table. It maps this port to its entry in the mib-2 interfaces table. TmnxPortID (TN-TC-MIB) .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.1 |
tnPortLastChangeTimeThe tnPortLastChangeTime variable contains the sysUpTime value of the most recently modified writable variable in the tnPortEntry row for this port.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.2 |
tnPortTypeThe type of port or optical pack installed.ro TmnxPortType .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.3 |
tnPortClassThe class of port or optical pack installed. This can be derived from tnPortType.ro TmnxPortClass .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.4 |
tnPortDescriptionA textual string containing user supplied information about the interface.rw TItemLongDescription (TN-TC-MIB) .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.5 |
tnPortNameThe textual name of the interface. The value of this object should be the name of the interface as assigned by the local device and should be suitable for use in commands entered at the device's `console'. This might be a text name, such as `le0' or 'sys171-2/1.ro TNamedItemOrEmpty (TN-TC-MIB) .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.6 |
tnPortAliasThis object is an 'alias' name for the interface as specified by a network manager, and provides a non-volatile 'handle' for the interface. On the first instantiation of an interface, the value of tnPortAlias associated with that interface is the zero-length string. As and when a value is written into an instance of tnPortAlias through a network management set operation, then the agent must retain the supplied value in the tnPortAlias instance associated with the same interface for as long as that interface remains instantiated, including across all re- initializations/reboots of the network management system.rw TNamedItemOrEmpty (TN-TC-MIB) .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.7 |
tnPortUserAssignedMacWhen tnPortUserAssignedMac has a value of 'true', the value of tnPortMacAddress has been explicitly assigned by a SNMP SET request. When tnPortUserAssignedMac is set to 'false', tnPortMacAddress returns the system assigned MAC address.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.8 |
tnPortMacAddressWhen tnPortUserAssignedMac has a value of 'true', tnPortMacAddress has the value that has been explicitly assigned by a SNMP SET request. When tnPortUserAssignedMac has a value of 'false', tnPortMacAddress returns the same value as tnPortMacAddress, the hardware or system assigned MAC address. When tnPortMacAddress is modified by a SET request, the agent sets tnPortUserAssignedMac to 'true'. Setting tnPortMacAddress to all zeros causes the agent to revert to using the default tnPortHwMacAddress and also to return tnPortUserAssignedMac as 'false'.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.9 |
tnPortHwMacAddressThe interface's hardware or system assigned MAC address at its protocol sub-layer. When tnPortUserAssignedMac has a value of 'true', the value of tnPortMacAddress is used instead of tnPortHwMacAddress. In the case of a pre-provisioned port that is not yet physically in the system, the MAC address may not be known. In this case a MAC address of all zeros is returned.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.10 |
tnPortModeThe tnPortMode variable indicates if the interface on this port is configured as a service access port or a network access port. If the port mode equals 'access', and the tmnxMDAAssignedType is of ATM MDA family, then tnPortEncapType is automatically set to 'atmEncap'. If port mode equals 'access', tnPortEncapType must also be configured to 'qEncap' (For Ethernet MDAs) or to 'bcpNullEncap' for Sonet/SDH MDAs. Once the port's operation mode has been configured for 'access' mode, multiple services may be configured on the port. If the port mode equals 'network', tnPortEncapType must also be configured to 'nullEncap' (Ethernet MDAs), or 'pppAutoEncap' (Sonet/SDH MDAs) and tnPortEncapType is defaulted to those values on the mode change.rw Enumeration .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.11 |
tnPortEncapTypeThe type of encapsulation protocol configured on this port's network interface. If tnPortEncapType has a value of 'nullEncap', frames received will not carry any tags or labels and as a result only one service can be configured on this port. Sometimes this is referred to as raw Ethernet packets. If tnPortEncapType has a value of 'qEncap', ingress frames carry 802.1q tags where each different tag can signify a different service. This is not a valid value if tnPortClass has a value of 'sonetPath'. If tnPortEncapType has a value of 'bcpNullEncap', Bcp is used on the sonet path as the NCP control protocol. The BCP IEEE 802 Tagged Frame Configuration Option (type 8) is negotiated to 'enabled'. VLAN tagged frames are allowed into the sonet path. Only a single SAP can be associated with the sonet path. 'bcpNullEncap' is valid only if tnPortClass has a value of 'sonetPath'. If tnPortEncapType has a value of 'bcpDot1qEncap', BCP is used as the NCP control protocol. The BCP IEEE 802 Tagged Frame Configuration Option (type 8) is negotiated to 'enabled'. VLAN tagged frames are allowed on the sonet path. This encapsulation type is required when multiple SAPs are defined on the sonet path where each one is service delimited by a provisioned Dot1q tag. When 'bcpDot1qEncap' is specified, BCP does not enter the 'open' state unless the far end peer also supports 'bcpDot1qEncap'. This allows a LCP negotiation to transmit configuration request and confirmation messages to enable this feature. 'bcpDot1qEncap' is a valid value only if tnPortClass has a value of 'sonetPath'. If tnPortEncapType has a value of 'ipcpEncap', BCP will not be used on this sonet path. IPCP NCP is used instead. 'ipcpEncap' is a valid only if tnPortClass has a value of 'sonetPath'. If tnPortEncapType has a value of 'frEncap', Frame Relay is the expected encapsulation. If tnPortEncapType has a value of 'pppAutoEncap', IPCP is automatically enabled. This encap type is only valid on ports/paths in network mode. If tnPortEncapType has a value of 'atmEncap', the encapsulation on the port is ATM. The 'atmEncap' is also used when mirroring ATM ports. If tnPortEncapType has a value of 'wanMirrorEncap', the port is used for mirroring of frame-relay and POS ports. On such ports no link management protocol would run. If tnPortEncapType has a value of 'ciscoHDLCEncap', the Cisco HDLC encapsulation is applied. This encap type is only valid if TmnxPortClass has a value of 'tdm' or 'sonet'. If tnPortEncapType has a value of 'cemEncap', encapsulation of frames will be circuit emulation. This is used to support transparent transmission of frames. This encap type is only valid if TmnxPortClass has a value of 'tdm' or 'sonet' in access mode. tnPortEncapType is set to 'unknown' for physical SONET/SDH and TDM ports.rw Enumeration .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.12 |
tnPortLagIdThe value of tnPortLagId indicates which LAG or multi-link trunk (MLT) this port is assigned to. If this port is not associated with any LAG, this value will be set to zero(0). The maximum value of this object is '64', when the value of TIMETRA-CHASSIS-MIB::tnChassisType is '5' (ESS-1/SR-1).rw Unsigned32 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.13 |
tnPortHoldTimeUpThe value of tnPortHoldTimeUp is used to configure the hold-timer for link up event dampening. This guards against reporting excessive interface transitions. This is implemented by not advertising subsequent transitions of the interface to upper layer protocols until the configured timer has expired. A value of zero (0) indicates that an up transition is reported immediately. The value of tnPortHoldTimeUp is not applicable when tnPortClass has a value of 'sonet (5)'. In that case, tnSonetHoldTimeUp is used instead. tnPortHoldTimeUp is measured in units as specified by tnPortHoldTimeUnits. The maximum hold-time for this object is 15 minutes, regardless of the units specified. Attempts to change the maximum value to a hold-time longer than 15 minutes will result in an INCONSISTENT error.rw Unsigned32 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.14 |
tnPortHoldTimeDownThe value of tnPortHoldTimeDown is used to configure the hold-timer for link down event dampening. This guards against reporting excessive interface transitions. This is implemented by not advertising subsequent transitions of the interface to upper layer protocols until the configured timer has expired. A value of zero (0) indicates that a down transition is reported immediately. The value of tnPortHoldTimeDown is not applicable when tnPortClass has a value of 'sonet (5)'. In that case, tnSonetHoldTimeDown is used instead. tnPortHoldTimeDown is measured in units as specified by tnPortHoldTimeUnits. The maximum hold-time for this object is 15 minutes, regardless of the units specified. Attempts to change the maximum value to a hold-time longer than 15 minutes will result in an INCONSISTENT error.rw Unsigned32 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.15 |
tnPortUpProtocolsThe tnPortUpProtocols variable is a bitmap that indicates what protocols can be used on this port type.ro Bits .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.16 |
tnPortConnectorTypeThe type of connector installed on this port.ro TmnxPortConnectorType .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.17 |
tnPortTransceiverTypeType of the transceiver.ro Enumeration .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.25 |
tnPortTransceiverLaserWaveLenThe light wavelength transmitted by the transceiver's laser. A value of zero indicates that the port is not equipped with the transceiver.ro Unsigned32 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.27 |
tnPortTransceiverDiagCapableIndicates if the transceiver is capable of doing diagnostics.ro Enumeration .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.28 |
tnPortTransceiverModelNumberThe value of tnPortTransceiverModelNumber indicates the model information for the transceiver, as read from the transceiver EEPROM. For example, the string may contain the Nokia part number and CLEI for the transceiver. The string is expected to contain printable ASCII characters, but unprintable ASCII characters read from the EEPROM are not filtered out.ro TNamedItemOrEmpty (TN-TC-MIB) .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.29 |
tnPortSFPConnectorCodeThe external connector provided on the interface.ro Enumeration .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.30 |
tnPortSFPVendorOUIThe vendor organizationally unique identifier field (OUI) contains the IEEE company identifier for the vendor. A value of all zero indicates that the vendor OUI is unspecified.ro Unsigned32 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.31 |
tnPortSFPVendorManufactureDateThe vendor's date code.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.32 |
tnPortSFPMediaThe media supported for the SFP.ro Enumeration .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.33 |
tnPortSFPEquippedIndicates if the SFP is equipped.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.34 |
tnPortEquippedIndicates if there is an optics pack installed in this port or not.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.35 |
tnPortLinkStatusIndicates whether or not the port has a physical link.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.36 |
tnPortAdminStatusThe desired administrative status of this port.rw TmnxPortAdminStatus .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.37 |
tnPortOperStatusThe current operational status of this port.ro TmnxPortOperStatus .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.38 |
tnPortStateThe state level of this port. A value of 'none' indicates the port is either in its initial creation state or is just about to be deleted. A value of 'ghost' represents a port that is not physically present. This state may represent a pre-provisioned port. A value of 'linkDown' represents a port that is physically present but does not have a link. The 'linkUp' state represents a port that is physically present and has physical link present. A port in 'up' state is ready to pass some kinds of traffic. The tnPortUpProtocols variable indicates the actual type(s) of traffic can be passed on this 'up' link.ro TmnxPortState .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.39 |
tnPortPrevStateThe tnPortPrevState indicates the state level that the port transitioned from into the current tnPortState level.ro TmnxPortState .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.40 |
tnPortNumAlarmsThe number of alarms currently outstanding on this port.ro Unsigned32 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.41 |
tnPortAlarmStateThe value of tnPortAlarmState indicates the current alarm state for this port.ro TmnxAlarmState .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.42 |
tnPortLastAlarmEventThe value of tnPortLastAlarmEvent indicates the object name and instance value that points to the row entry in the ALARM-MIB containing the most recent alarm associated with this port. If tnPortAlarmState has a value of 'alarmCleared(2)', the most recent alarm event will be in the cleared alarm table. If it has a value of 'alarmActive(1)', the most recent alarm event will be in the active alarm table. If the value of tnPortLastAlarmEvent is '0.0', either no port alarm events have occurred since the system was last booted, or the last port alarm event has aged out and its entry is no longer available in the ALARM-MIB tables.ro RowPointer (SNMPv2-TC) .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.43 |
tnPortClearAlarmsSetting this action variable causes all the alarms associated with this port to be moved from the current alarm log to the history alarm log. Primarily meant for use in development. This object will most likely be removed from the MIB before product release.rw TmnxActionType (TN-TC-MIB) .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.44 |
tnPortSFPVendorSerialNumThe value of tnPortSFPVendorSerialNum indicates the transceiver's vendor serial number in ASCII characters, as read from the transceiver EEPROM. An empty string indicates the vendor serial number is unspecified. The string is expected to contain printable ASCII characters, but unprintable ASCII characters read from the EEPROM are not filtered out.ro TNamedItemOrEmpty (TN-TC-MIB) .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.45 |
tnPortSFPVendorPartNumThe value of tnPortSFPVendorPartNum indicates the transceiver's vendor part number (or product name) in ASCII characters, as read from the transceiver EEPROM. An empty string indicates the vendor part number is unspecified. The string is expected to contain printable ASCII characters, but unprintable ASCII characters read from the EEPROM are not filtered out.ro TNamedItemOrEmpty (TN-TC-MIB) .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.46 |
tnPortLastStateChangedThe tnPortLastStateChanged variable contains the value of the sysUpTime the last time the operational status of the port changed state.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.48 |
tnPortNumChannelsFor SONET/SDH paths or TDM channels, tnPortNumChannels contains the number of possible immediate children. For leaf paths or channels, the value of this object will be zero. For SONET/SDH or TDM physical ports, tnPortNumChannels contains the total number of channels on the physical port. For all other entries in the tnPortTable, the value of this object will be zero.ro Unsigned32 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.49 |
tnPortNetworkEgrQueuestnPortNetworkEgrQueues contains the network egress queue policy if the tnPortMode is network. Otherwise this object has no significance.rw TNamedItemOrEmpty (TN-TC-MIB) .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.50 |
tnPortBundleNumbertnPortBundleNumber identifies the bundle for which this port is a member. If this port is not a member of any bundle, the value of tnPortBundleNumber will be zero.ro Integer32 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.51 |
tnPortIsLeaftnPortIsLeaf is applicable only when the 'isSonet' and/or 'isTDM' bits in TIMETRA-CHASSIS-MIB:tmnxMDACapabilities are set. When the value of this object is 'true', it indicates that the channel is capable of passing traffic. The value of this object is 'false' for: 1. Physical ports on SONET/TDM MDA's 2. Intermediate channels on a channelized MDA 3. Leaf channels which belong to a bundle For ports on Ethernet MDA's or for LAG ports, the value of this object will be 'false'.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.52 |
tnPortParentPortIDtnPortParentPortID is applicable only when the 'isSonet' and/or 'isTDM' bits in TIMETRA-CHASSIS-MIB:tmnxMDACapabilities are set. For SONET or TDM channel, it indicates the port ID of its parent channel or port.ro TmnxPortID (TN-TC-MIB) .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.54 |
tnPortOpticalCompliancetnPortOpticalCompliance is applicable only when the tnPortSFPEquipped is set to 'true'. The value of tnPortOpticalCompliance indicates the 8 bytes of optical compliance bits stored in SFP and XFP eeproms.ro OCTET STRING .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.55 |
tnPortLoadBalanceAlgorithmThe value of tnPortLoadBalanceAlgorithm specifies the load balancing algorithm to be used on this port. When the value is 'includeL4', the src and dst port are used in the hashing algorithm. When it's 'excludeL4', they are not included. When the value is 'default', the port inherits the global settings in tnL4LoadBalancing. The value is 'notApplicable' for ports that do not pass any traffic. An attempt to modify this object when it is set to 'notApplicable' will return an inconsistentValue error.rw Enumeration .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.56 |
tnPortEgrPortSchedPlcyThe value of tnPortEgrPortSchedPlcy specifies the egress QoS port-scheduler policy for this port. This object must correspond to the index of a row in TIMETRA-QOS-MIB::tPortSchedulerPlcyTable. A non-empty value for tnPortEgrPortSchedPlcy is only valid when the tmnxMDAAssignedType is a non-HSMDA MDA Type. Attempting to set tnPortEgrPortSchedPlcy to a non-empty string when the tmnxMDAAssignedType is a HSMDA MDA Type will return an 'inconsistentValue' error.rw TNamedItemOrEmpty (TN-TC-MIB) .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.57 |
tnPortLastClearedTimeThe value of tnPortLastClearedTime indicates the sysUpTime when the counters in the IF-MIB:ifTable were last cleared.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.58 |
tnPortEgrHsmdaSchedPlcyThe value of tnPortEgrHsmdaSchedPlcy specifies the egress QoS Hsmda-scheduler policy for this port. This object must correspond to the index of a row in TIMETRA-QOS-MIB::tHsmdaSchedulerPlcyTable, otherwise an 'inconsistentValue' error will be returned. When the tmnxMDAAssignedType is a non-HSMDA MDA Type, the value for tnPortEgrHsmdaSchedPlcy will be ignored. If the tmnxMDAAssignedType is a HSMDA MDA Type, the default for this object will be the string 'default'.rw TNamedItemOrEmpty (TN-TC-MIB) .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.59 |
tnPortIngNamedPoolPlcyThe value of tnPortIngNamedPoolPlcy specifies a named pool policy associated with an port ingress context. The policy governs the way named pools are created at the port level.rw TNamedItemOrEmpty (TN-TC-MIB) .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.60 |
tnPortEgrNamedPoolPlcyThe value of tnPortEgrNamedPoolPlcy specifies a named pool policy associated with an port egress context. The policy governs the way named pools are created at the port level.rw TNamedItemOrEmpty (TN-TC-MIB) .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.61 |
tnPortIngPoolPercentRateThe value of tnPortIngPoolPercentRate specifies increment or decrement of the active bandwidth associated with the ingress port. This active bandwidth affects the amount of ingress buffer space managed by the port.rw Unsigned32 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.62 |
tnPortEgrPoolPercentRateThe value of tnPortEgrPoolPercentRate specifies increment or decrement of the active bandwidth associated with the egress port. This active bandwidth affects the amount of egress buffer space managed by the port.rw Unsigned32 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.63 |
tnPortDDMEventSuppressionThe value of tnPortDDMEventSuppression specifies whether or not an inserted SFP/XFP that supports Digital Diagnostic Monitoring raises traps and events (false) or suppresses all notifications (true).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.64 |
tnPortSFPStatusThe value of tnPortSFPStatus indicates the operational status of the inserted SFP/XFP. If tnPortSFPEquipped is false, the tnPortSFPStatus will be 'not-equipped (0)', otherwise 'operational (1)' if no failure is detected. A failure to read the SFP data will result in a 'read-error (2)', while corrupted information on the SFP will result in either 'data-corrupt (3)', or 'ddm-corrupt (4)' if an SFP read results in invalid data or DDM information respectively. An insertion of an unsupported SFP will result in 'unsupported (5)'. A trap will be raised if the value of tnPortSFPStatus indicates a failure; that is the tnPortSFPStatus is neither 'not-equipped (0)', nor 'operational (1)'.ro Enumeration .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.65 |
tnPortReasonDownFlagsThe tnPortReasonDownFlags indicates why a port may be in the operationally 'down' state. The following reasons are detected through this object: unknown(0) - Unspecified (or unknown) linklossFwd(1) - A sap using this port has an LLF operational status set to 'fault' lagMemberPortStandby(2) - A lag using this port as a member port has set the member port to 'standby' while configured to keep standby member ports down. ethCfmFault(3) - A facility MEP bound to this port has its dot1agCfmMepHighestPrDefect set to a value other than 'none (0)'. opticalTuning(4) - The DWDM optical receive signal is undergoing tuning and analysis by control algorithms to find the optimal settings. channelOutOfRange(5) - The configured DWDM optical channel is out of range for the equipped tunable optical interface. channelNotConfigured(6) - The DWDM optical channel is not configured for the equipped tunable optical interface. crcError(7) - CRC errors on the port exceeded the configured threshold. internalMacTxError(8) - An internal MAC tx error was detected on the port. noServicePort(9) - port configured as no-service port.ro Bits .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.66 |
tnPortSSMRxQualityLeveltnPortSSMRxQualityLevel indicates the SSM quality level of received SSM messages. On ports not supporting SSM, or not receiving SSM messages, the quality level will be 'unknown (0)'. The values 'prs (1)' through 'dus (9)' and 'pno (16)' correspond to quality levels defined in GR-253-CORE. The values 'prc (10)' through 'inv (15)' correspond to quality levels defined in G.781. The values 'eec1 (17)' and 'eec2 (18)' correspond to quality levels defines in G.8264. The value 'failed (19)' is used when there is a failure in the SSM channel.ro Enumeration .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.67 |
tnPortDwdmLaserChanneltnPortDwdmLaserChannel specifies the DWDM ITU channel at which a tunable MDA optical interface will be configured to operate. It is expressed in a form that is derived from the laser's operational frequency. For example 193.40 THz corresponds to DWDM ITU channel 34 in the 100 GHz grid and 193.45 THz corresponds to DWDM ITU channel 345 in the 50 GHz grid. A value of zero(0) can be specified only on an administratively disabled port; to enable the port, the tnPortDwdmLaserChannel must be changed to a valid DWDM ITU channel number in either the 50GHz, or 100GHz grid. Range ITU Grid -------- ---------------------- 17-61 100 GHz Grid 170-610 50 GHz Gridrw Unsigned32 (0|17..61|170..610) .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.68 |
tnPortOtuCapableThe value of tnPortOtuCapable indicates whether or not the physical port supports the Optical Transport Unit (OTU) encapsulation.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.69 |
tnPortHoldTimeUnitsThe value of tnPortHoldTimeUnits specifies the measurable units of tnPortHoldTimeDown and tnPortHoldTimeUp.rw Enumeration .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.70 |
tnPortLinkLengthInfoThe value of tnPortLinkLengthInfo indicates the link length info stored in SFP and XFP EEPROMs. tnPortLinkLengthInfo is applicable only when tnPortSFPEquipped is 'true'; otherwise, all 6 bytes will have a value of '0'. See SFF Committee documents for details on the representation of the values in each byte. For SFP EEPROMs, the 6 bytes are bytes 14 to 19 of the A0 bank inclusive, described in SFF Committee document SFF-8472. For XFP EEPROMs, the first 5 bytes are bytes 142 to 146 of the 01 bank inclusive, described in SFF Committee document INF-8077i. For XFP EEPROMs, byte 6 will have a value of '0'.ro OCTET STRING .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.71 |
tnPortSFPNumLanesThe value of tnPortSFPNumLanes indicates the total number of lanes supported by the CSFP/QSFP. If tnPortSFPEquipped is false, this object will have a value of '0'.ro Unsigned32 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.72 |
tnPortPhysStateChangeCountThe value of tnPortPhysStateChangeCount indicates the number of times a physical port state has changed from 'linkDown (3)' to either 'linkUp (4)' or 'up (5)' and from either 'linkUp (4)' or 'up (5)' to 'linkDown (3)'. The count does not include transitions between 'linkUp (4)' and 'up (5)'. This counter is applicable to physical Ethernet ports only. All other ports maintain a count of 0. This object is automatically reset to zero, once the port enters the 'ghost (2)' state. To reset this object manually, one may use the tnClearTable entry whose tnClearName value is 'clearPortPhysStateChangeCount' by specifying the tnClearParams value with 'port-id=<ifIndex>'.ro Counter32 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.73 |
tnPortPacketSwitchIdThe value of tnPortPacketSwitchId indicates the packetswitch id that this port belongs to. For PSS cards 11OPE8, 11QCE12X, 11QPE24, which are not supported by packetswitch, the value returned will be zero. If a packetswitch supported card (eg 12CE120) has not been provisioned in a packetswitch, the id will also be zero.ro Unsigned32 .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.74 |
tnPortOtnSignalDegradeThe value of tnPortOtnSd specifies whether to enable or disable the ODUk/OTUk (G.709) Signal Degrade defect to cause the port to be operationally down. All consequent actions of a port operational down status are applicable to the higher layers configured on the port. These include but not limited to ERP switching, MPLS-TP LSP switching, OAM, LAG, services etc.rw TmnxEnabledDisabled (TN-TC-MIB) .1.3.6.1.4.1.7483.6.1.2.2.4.2.1.75 |
tnPortTestTableThe tnPortTestTable has an entry for each port on each IOM card in each chassis in the TMNX system. SEQUENCE OF TmnxPortTestEntry .1.3.6.1.4.1.7483.6.1.2.2.4.3 |
tnPortTestEntryEach row entry represents a port on a IOM card in a chassis in the system. Entries cannot be created and deleted via SNMP SET operations. TmnxPortTestEntry .1.3.6.1.4.1.7483.6.1.2.2.4.3.1 |
tnPortTestStateThe current testing status of this port.ro Enumeration .1.3.6.1.4.1.7483.6.1.2.2.4.3.1.1 |
tnPortTestModeThe type of test to be executed on this port.rw Enumeration .1.3.6.1.4.1.7483.6.1.2.2.4.3.1.2 |
tnPortTestParameterA parameter to be passed to the test program.rw Unsigned32 .1.3.6.1.4.1.7483.6.1.2.2.4.3.1.3 |
tnPortTestLastResultThe status of the last test executed on this port.ro Enumeration .1.3.6.1.4.1.7483.6.1.2.2.4.3.1.4 |
tnPortTestStartTimeThe date and time the test started on this port. Returns 0 if tnPortTestState is notInTest.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.7483.6.1.2.2.4.3.1.5 |
tnPortTestEndTimeThe date and time the last test completed. Returns 0 if a test is in progress or no tests have yet to be run on this port.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.7483.6.1.2.2.4.3.1.6 |
tnPortTestDurationThe number of seconds the port test is anticipated to last.rw Integer32 .1.3.6.1.4.1.7483.6.1.2.2.4.3.1.7 |
tnPortTestActionThe operator sets this variable to perform the appropriate type of testing.rw Enumeration .1.3.6.1.4.1.7483.6.1.2.2.4.3.1.8 |
tnPortEtherTableThe tnPortEtherTable has an entry for each Ethernet (faste, gige, xcme or xgige) port on each IOM card in each chassis in the TMNX system. SEQUENCE OF TmnxPortEtherEntry .1.3.6.1.4.1.7483.6.1.2.2.4.4 |
tnPortEtherEntryEach row entry represents an Ethernet port on a IOM card in a chassis in the system. Entries cannot be created and deleted via SNMP SET operations. Before an IOM card entry can be deleted from the tmnxMDATable, its supported tnPortEntry and tnPortEtherEntry rows must be in the proper state for removal. The tnPortEtherEntry contains attributes that are unique to the Ethernet TmnxPortType. TmnxPortEtherEntry .1.3.6.1.4.1.7483.6.1.2.2.4.4.1 |
tnPortEtherMTUThe size of the largest packet which can be sent/received on the Ethernet physical interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface. Setting tnPortEtherMTU to a value of zero (0), causes the agent to recalculate the default MTU size which can vary based on the current setting of tnPortMode and tnPortEncapType variables. Some typical default values are: 1514 with mode access and encap-type null 1518 with mode access and encap-type dot1q 1518 with mode access and encap-type mpls 9198 with mode networkrw Unsigned32 (0|512..9612) UNITS "bytes" .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.1 |
tnPortEtherDuplexThe tnPortEtherDuplex variable specifies the duplex mode used by the Ethernet interface if tnPortEtherAutoNegotiate has a value of 'false' or 'limited'. If tnPortEtherAutoNegotiate has a value of 'true', the link parameters are negotiated with the far end and the tnPortEtherDuplex variable is ignored. A value of 'fullDuplex' sets the link to full duplex mode. A value of 'halfDuplex' sets the link to half duplex mode. tnPortEtherDuplex is only valid on Ethernet interfaces that support multiple duplex modes.rw Enumeration .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.2 |
tnPortEtherSpeedThe tnPortEtherSpeed variable specifies the link speed of the Ethernet interface if tnPortEtherAutoNegotiate has a value of 'false' or 'limited'. If tnPortEtherAutoNegotiate has a value of 'true', the link parameters are negotiated with the far end and the tnPortEtherSpeed variable is ignored. A value of 'speed10' sets the link to 10 mbps. A value of 'speed100' sets the link to 100 mbps. A value of 'speed1000' sets the link to 1000 mbps (1 gbps). tnPortEtherSpeed is only valid on Ethernet interfaces that support multiple link speeds.rw Enumeration .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.3 |
tnPortEtherAutoNegotiateWhen the value of tnPortEtherAutoNegotiate is 'true', the Ethernet interface will automatically negotiate link parameters with the far end (including speed and duplex), and will advertise all speeds and duplex modes supported by the interface. When the value of tnPortEtherAutoNegotiate is 'limited', the Ethernet interface will automatically negotiate link parameters with the far end, but will only advertise the speed and duplex mode specified by tnPortEtherSpeed and tnPortEtherDuplex. If tnPortEtherAutoNegotiate is 'false', the Ethernet interface won't negotiate link parameters with the far end and will instead force the speed and duplex mode to the values specified by tnPortEtherSpeed and tnPortEtherDuplex respectively.rw Enumeration .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.4 |
tnPortEtherOperDuplexThe tnPortEtherOperDuplex variable indicates the operational duplex mode of the Ethernet interface. A value of 'fullDuplex' indicates that the link is in full duplex mode. A value of 'halfDuplex' indicates that the link is in half duplex mode. tnPortEtherOperDuplex is only valid if tnPortClass is 'faste' or 'xcme'.ro Enumeration .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.5 |
tnPortEtherOperSpeedThe tnPortEtherOperSpeed variable indicates the operational speed of the Ethernet interface in mega-bits per second (mbps). If the value of tnPortEtherAutoNegotiate is 'true', the link autonegotiates the link parameters with the far end side. The value of tnPortEtherOperSpeed is only valid if tnPortClass is one of the Ethernet classes.ro Unsigned32 UNITS "mega-bits per second" .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.6 |
tnPortEtherAcctPolicyIdThe value of the accounting policy must be defined prior to associating the policy with the ethernet port. Accounting policies can only be associated with network ports. A non-zero value indicates the tmnxLogApPolicyId index identifying the policy entry in the tmnxLogApTable from the TIMETRA-LOG-MIB which is associated with this port. A zero value indicates that there is no accounting policy associated with this portrw Unsigned32 .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.7 |
tnPortEtherCollectStatsEnable/disable the collection of accounting and statistical data for the network ethernet port. When applying accounting policies the data by default will be collected in the appropriate records and written to the designated billing file. When the value is set to false, the statistics are still accumulated by the IOM cards, however, the CPU will not obtain the results and write them to the billing file.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.8 |
tnPortEtherMDIMDIXThe tnPortEtherMDIMDIX variable indicates whether the Ethernet interface is of type 'mdi' (Media Dependent Interface) or 'mdix' (Media Dependent Interface with crossover). If the agent cannot identify the type of Ethernet interface the value 'unknown (0)' is indicated. tnPortEtherMDIMDIX is only valid if tnPortClass is 'faste' or 'xcme'.ro Enumeration .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.9 |
tnPortEtherXGigModeThe tnPortEtherXGigMode variable specifies whether the Ethernet interface is in LAN or WAN mode. tnPortEtherXGigMode must be 'notApplicable' if tnPortClass is not 'xgige'.rw Enumeration .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.10 |
tnPortEtherEgressRateThe tnPortEtherEgressRate variable specifies the maximum egress bandwidth (in kilobits per second) that the Ethernet interface can generate. A value of -1 means that the limit is the actual physical limit. If the provisioned sub-rate bandwidth is larger than the actual physical bandwidth of the interface, the latter applies.rw Integer32 (-1 | 1..100000000) .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.11 |
tnPortEtherDot1qEtypeThe tnPortEtherDot1qEtype variable indicates the ethertype expected when the port's encapsulation type is dot1qEncap.rw Unsigned32 ('0600'H..'ffff'H) .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.12 |
tnPortEtherQinqEtypeThe tnPortEtherQinqEtype variable indicates the ethertype expected when the port's encapsulation type is qinqEncap.rw Unsigned32 ('0600'H..'ffff'H) .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.13 |
tnPortEtherIngressRateThe tnPortEtherIngressRate variable specifies the maximum ingress bandwidth (in mega-bits per second) that the Ethernet interface can receive. A value of -1 means that the limit is the actual physical limit. If the provisioned sub-rate bandwidth is larger than the actual physical bandwidth of the interface, the latter applies.rw Integer32 (-1 | 1..10000) UNITS "mega-bits per second" .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.14 |
tnPortEtherReportAlarmThe value of tnPortEtherReportAlarm determines when and if to generate tnEqPortEtherAlarm and tnEqPortEtherAlarmClear.rw TmnxPortEtherReportStatus .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.15 |
tnPortEtherReportAlarmStatusThe value of tnPortEtherReportAlarmStatus indicates the alarms on this port.ro TmnxPortEtherReportStatus .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.16 |
tnPortEtherPkts1519toMaxThe total number of packets received that were longer than 1518 octets but less than the maximum frame size for the particular medium, usually 12287 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.ro Counter32 UNITS "Packets" .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.17 |
tnPortEtherHCOverPkts1519toMaxThe number of times the associated tnPortEtherPkts1519toMax counter has overflowed.ro Counter32 UNITS "Packets" .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.18 |
tnPortEtherHCPkts1519toMaxThe total number of packets (including bad packets) received that were between 1519 octets in length and the maximum frame size, usually 12287 octets inclusive (excluding framing bits but including FCS octets). The lower 32-bits of this 64-bit counter will equal the value of tnPortEtherHCPkts1519toMax. The high 32-bits of this counter will equal the value of tnPortEtherHCOverPkts1519toMax.ro Counter64 UNITS "Packets" .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.19 |
tnPortEtherLacpTunnelThe value of tnPortEtherLacpTunnel specifies whether the LACP packet tunneling for the ethernet port is enabled or disabled. When tunneling is enabled, the port will not process any LACP packets but will tunnel them through instead. Also, the port cannot be added as a member to a LAG group, and vice versa.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.20 |
tnPortEtherDownWhenLoopedEnabledThe value of tnPortEtherDownWhenLoopedEnabled specifies whether physical loop detection for the Ethernet port is enabled or disabled. When enabled, the port will periodically send out keep-alive PDUs with an EtherType of 0x9000. If the port receives a keep-alive that it transmitted, tnPortState will be set to 'linkUp' if it was previously 'up'. The port will not move back to tnPortState 'up' for a period of time defined by tnPortEtherDownWhenLoopedRetry, but will continue to periodically send out keep-alive PDUs. Every time the port receives a keep alive it sent while a loop has been detected, it will reset the time period that it will remain down as defined by tnPortEtherDownWhenLoopedRetry.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.21 |
tnPortEtherDownWhenLoopedKeepAliveThe tnPortEtherDownWhenLoopedKeepAlive variable specifies the number of seconds between each keep alive PDU transmission.rw Unsigned32 .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.22 |
tnPortEtherDownWhenLoopedRetryThe tnPortEtherDownWhenLoopedRetry variable specifies the minimum number of seconds the port should wait after detecting a loop before tnPortState can be set to 'up'. A value of 0 specifies the the port should not set tnPortState to 'up' until the user administratively disables and re-enables the port by setting tnPortAdminStatus to 'outOfService' and then to 'inService'.rw Unsigned32 (0|10..160) UNITS "seconds" .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.23 |
tnPortEtherDownWhenLoopedStateThe value of tnPortEtherDownWhenLoopedState indicates whether a physical loop has been detected on the port or not. If tnPortEtherDownWhenLoopedEnabled is set to 'false', this value will be 'noLoopDetected'.ro Enumeration .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.24 |
tnPortEtherPBBEtypeThe tnPortEtherPBBEtype variable indicates the Ethertype expected for Provider Backbone Bridging Frames.rw Unsigned32 ('0600'H..'ffff'H) .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.25 |
tnPortEtherSingleFibertnPortEtherSingleFiber is used to enable/disable packet gathering and redirection of IP packets from a single fiber on RX port of the Ethernet interface and redistribute packets to other interfaces through either state routes or policy-based forwarding.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.27 |
tnPortEtherSSMtnPortEtherSSM specifies whether or not synchronous status messages (SSM) are enabled on the ethernet port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.28 |
tnPortEtherDWLUseBroadcastAddrtnPortEtherDWLUseBroadcastAddr specifies whether or not the Down When Looped destination MAC address is the broadcast address, 'true (1)', or the local port mac address, as specified in tnPortMacAddress, 'false (2)'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.29 |
tnPortEtherSSMCodeTypeThe value of tnPortEtherSSMCodeType specifies the code-type used by the Synchronous Status Message (SSM) channel.rw Enumeration .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.30 |
tnPortEtherSSMTxDusThe value of tnPortEtherSSMTxDus specifies whether or not the value 0xF (dus/dnu) is forced in the Synchronous Status Message (SSM) channel.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.31 |
tnPortEtherSSMRxEsmcThe value of tnPortEtherSSMRxEsmc indicates the SSM code received on the Ethernet Synchronization Messaging Channel of the Ethernet port. The value returned for this object is only meaningful if tnPortEtherSSM is 'true', and tnPortSSMRxQualityLevel is not 'failed'.ro Unsigned32 .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.32 |
tnPortEtherSSMTxQualityLevelThe value of tnPortEtherSSMTxQualityLevel indicates the quality level transmitted in the Ethernet Synchronization Messaging Channel.ro Enumeration .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.33 |
tnPortEtherQinqEtypelinkEthertype profile ID which is referenced to tnCardEtherTypeProfileTable. If tnPortEtherQinqEtypelink is zero, it indicates no associations. If there is an association, tnPortEtherQinqEtype shall equal to tnCardEthertypeQinQEtype, it means that the configuration per card will override the configuration per port. The profile ID 1 is associated all qinq port if no other profile is explicitly specifiedrw Unsigned32 .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.34 |
tnPortEtherOperEgressRateThe tnPortEtherOperEgressRate variable specifies the operational egress bandwidth (in kilobits per second) that the Ethernet interface generates. A value of -1 means that the limit is the actual physical limit.ro Integer32 (-1 | 1..100000000) .1.3.6.1.4.1.7483.6.1.2.2.4.4.1.35 |
tnPortScalarObjs OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.1.2.2.4.19 |
tnPortScalar1A dummy scalar that satisfies a SNMP get request quickly when there is no 11QPE24 card provisioned. Otherwise, it has to traverse the remaining 11QPE24 MIB to get to the next applicable item.ro Unsigned32 .1.3.6.1.4.1.7483.6.1.2.2.4.19.11 |
tnPortScalar2.ro Unsigned32 .1.3.6.1.4.1.7483.6.1.2.2.4.19.12 |
tnPortScalar3.ro Unsigned32 .1.3.6.1.4.1.7483.6.1.2.2.4.19.13 |
tnPortScalar4.ro Unsigned32 .1.3.6.1.4.1.7483.6.1.2.2.4.19.14 |
tnPortScalar5.ro Unsigned32 .1.3.6.1.4.1.7483.6.1.2.2.4.19.15 |
tnPortScalar6.ro Unsigned32 .1.3.6.1.4.1.7483.6.1.2.2.4.19.16 |
tnPortScalar7.ro Unsigned32 .1.3.6.1.4.1.7483.6.1.2.2.4.19.17 |
tnPortScalar8.ro Unsigned32 .1.3.6.1.4.1.7483.6.1.2.2.4.19.18 |
tnPortScalar9.ro Unsigned32 .1.3.6.1.4.1.7483.6.1.2.2.4.19.19 |
tnPortScalar10.ro Unsigned32 .1.3.6.1.4.1.7483.6.1.2.2.4.19.20 |
tnPortScalar11.ro Unsigned32 .1.3.6.1.4.1.7483.6.1.2.2.4.19.21 |
tnPortScalar12.ro Unsigned32 .1.3.6.1.4.1.7483.6.1.2.2.4.19.22 |
tnPortScalar13.ro Unsigned32 .1.3.6.1.4.1.7483.6.1.2.2.4.19.23 |
tnPortScalar14.ro Unsigned32 .1.3.6.1.4.1.7483.6.1.2.2.4.19.24 |
tnPortScalar15.ro Unsigned32 .1.3.6.1.4.1.7483.6.1.2.2.4.19.25 |
tnPortScalar16.ro Unsigned32 .1.3.6.1.4.1.7483.6.1.2.2.4.19.26 |
tnPortScalar17.ro Unsigned32 .1.3.6.1.4.1.7483.6.1.2.2.4.19.27 |
tnPortScalar18.ro Unsigned32 .1.3.6.1.4.1.7483.6.1.2.2.4.19.28 |
tnPortScalar19.ro Unsigned32 .1.3.6.1.4.1.7483.6.1.2.2.4.19.29 |
tnPortScalar20.ro Unsigned32 .1.3.6.1.4.1.7483.6.1.2.2.4.19.30 |
tnPortScalar21.ro Unsigned32 .1.3.6.1.4.1.7483.6.1.2.2.4.19.31 |
tnPortScalar22.ro Unsigned32 .1.3.6.1.4.1.7483.6.1.2.2.4.19.32 |
tnPortScalar23.ro Unsigned32 .1.3.6.1.4.1.7483.6.1.2.2.4.19.33 |
tnPortScalar24.ro Unsigned32 .1.3.6.1.4.1.7483.6.1.2.2.4.19.34 |
tnPortScalar25.ro Unsigned32 .1.3.6.1.4.1.7483.6.1.2.2.4.19.35 |
tnPortScalar26.ro Unsigned32 .1.3.6.1.4.1.7483.6.1.2.2.4.19.36 |
tnPortScalar27.ro Unsigned32 .1.3.6.1.4.1.7483.6.1.2.2.4.19.37 |
tnPortScalar28.ro Unsigned32 .1.3.6.1.4.1.7483.6.1.2.2.4.19.38 |
tnPortScalar29.ro Unsigned32 .1.3.6.1.4.1.7483.6.1.2.2.4.19.39 |
tnPortScalar30.ro Unsigned32 .1.3.6.1.4.1.7483.6.1.2.2.4.19.40 |
tnPacketSwitchPortTableA table that can be used to find all the ports that belong to packetswitch. SEQUENCE OF TnPacketSwitchPortEntry .1.3.6.1.4.1.7483.6.1.2.2.4.99 |
tnPacketSwitchPortEntryEntries represent ports withing a packetswitch TnPacketSwitchPortEntry .1.3.6.1.4.1.7483.6.1.2.2.4.99.1 |
tnPacketSwitchPortNameThis is a duplication of tnPortName and is only used to provide a mechanism for UI's to iterate through all the ports in a packetswitch. The textual name of the interface. The value of this object should be the name of the interface as assigned by the local device and should be suitable for use in commands entered at the device's `console'. This might be a text name, such as `le0' or 'sys171-2/1.ro TNamedItemOrEmpty (TN-TC-MIB) .1.3.6.1.4.1.7483.6.1.2.2.4.99.1.1 |
tnEMACTableA table that can be used to configure EMAC. SEQUENCE OF TnEMACEntry .1.3.6.1.4.1.7483.6.1.2.2.4.100 |
tnEMACEntryEntries for EMAC configuration TnEMACEntry .1.3.6.1.4.1.7483.6.1.2.2.4.100.1 |
tnEMACIDtnEMACID is an index into this table. It maps this port to its entry in the mib-2 interfaces table. TmnxPortID (TN-TC-MIB) .1.3.6.1.4.1.7483.6.1.2.2.4.100.1.1 |
tnEMACAcctPolicyIdThe value of the accounting policy must be defined prior to associating the policy with the emac port. Accounting policies can only be associated with network ports. A non-zero value indicates the tmnxLogApPolicyId index identifying the policy entry in the tmnxLogApTable from the TIMETRA-LOG-MIB which is associated with this port. A zero value indicates that there is no accounting policy associated with this portrw Unsigned32 .1.3.6.1.4.1.7483.6.1.2.2.4.100.1.2 |
tnPMACTableA table that can be used to configure PMAC. SEQUENCE OF TnPMACEntry .1.3.6.1.4.1.7483.6.1.2.2.4.101 |
tnPMACEntryEntries for PMAC configuration TnPMACEntry .1.3.6.1.4.1.7483.6.1.2.2.4.101.1 |
tnPMACIDtnPMACID is an index into this table. It maps this port to its entry in the mib-2 interfaces table. TmnxPortID (TN-TC-MIB) .1.3.6.1.4.1.7483.6.1.2.2.4.101.1.1 |
tnPMACAcctPolicyIdThe value of the accounting policy must be defined prior to associating the policy with the pmac port. Accounting policies can only be associated with network ports. A non-zero value indicates the tmnxLogApPolicyId index identifying the policy entry in the tmnxLogApTable from the TIMETRA-LOG-MIB which is associated with this port. A zero value indicates that there is no accounting policy associated with this portrw Unsigned32 .1.3.6.1.4.1.7483.6.1.2.2.4.101.1.2 |
tnMMACTableA table that can be used to configure PMAC. SEQUENCE OF TnMMACEntry .1.3.6.1.4.1.7483.6.1.2.2.4.102 |
tnMMACEntryEntries for MMAC configuration TnMMACEntry .1.3.6.1.4.1.7483.6.1.2.2.4.102.1 |
tnMMACIDtnMMACID is an index into this table. It maps this port to its entry in the mib-2 interfaces table. TmnxPortID (TN-TC-MIB) .1.3.6.1.4.1.7483.6.1.2.2.4.102.1.1 |
tnMMACAcctPolicyIdThe value of the accounting policy must be defined prior to associating the policy with the mmac port. Accounting policies can only be associated with network ports. A non-zero value indicates the tmnxLogApPolicyId index identifying the policy entry in the tmnxLogApTable from the TIMETRA-LOG-MIB which is associated with this port. A zero value indicates that there is no accounting policy associated with this portrw Unsigned32 .1.3.6.1.4.1.7483.6.1.2.2.4.102.1.2 |
tnQosAppObjs OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.1.2.2.10 |
tnQosPoolAppTableThis table maintains associations of the buffer pools with the individual objects. SEQUENCE OF TmnxQosPoolAppEntry .1.3.6.1.4.1.7483.6.1.2.2.10.2 |
tnQosPoolAppEntryThis entry maintains the specifics about the association of a buffer pool and an object. TmnxQosPoolAppEntry .1.3.6.1.4.1.7483.6.1.2.2.10.2.1 |
tnObjectTypeThe object tnObjectType defines the type of object to which the pool is being setup for. Enumeration .1.3.6.1.4.1.7483.6.1.2.2.10.2.1.1 |
tnObjectIdtnObjectId is used to identify the specific object. If tnObjectType is 'mda', then the tnObjectId is encoded as a physical port with the port being '0'. For all other types the encoding is done as per the description of TmnxPortID. TmnxPortID (TN-TC-MIB) .1.3.6.1.4.1.7483.6.1.2.2.10.2.1.2 |
tnObjectAppTypeThe object tnObjectAppType specifies the nature of usage the pool would be used for. The pools could be used for access or network traffic at either ingress or egress. The value mpointQueues (51) is valid only for 7210-SAS-X platform. Enumeration .1.3.6.1.4.1.7483.6.1.2.2.10.2.1.3 |
tnObjectAppPooltnObjectAppPool specifies the name of the pool to be used/created. TNamedItem (TN-TC-MIB) .1.3.6.1.4.1.7483.6.1.2.2.10.2.1.4 |
tnObjectAppPoolRowStatusThe object tnObjectAppPoolRowStatus is used to create or remove a pool application to the object.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7483.6.1.2.2.10.2.1.5 |
tnObjectAppResvCbsThe percentage of pool size reserved for CBS. The value '-1' implies that the reserved CBS should be computed as the sum of the CBS requested by the entities using this pool if the application point is 'network'. For 'access' application points the value '-1' means a default of 30%.rw Integer32 (-1|0..100) .1.3.6.1.4.1.7483.6.1.2.2.10.2.1.6 |
tnObjectAppSlopePolicytnObjectAppSlopePolicy specifies the slope policy being used for this pool. The Slope policies define the nature of the RED Slopes for the high and the low priority traffic.rw TNamedItem (TN-TC-MIB) .1.3.6.1.4.1.7483.6.1.2.2.10.2.1.7 |
tnObjectAppPoolSizeSize in percentage of buffer space. The value '-1' implies that the pool size should be computed as per fair weighing between all other pools.rw Integer32 (-1|0..100) .1.3.6.1.4.1.7483.6.1.2.2.10.2.1.8 |
tnHwNotification OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.1.3.2 |
tnPortNotifyPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.1.3.2.2 |
tnPortNotification OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.1.3.2.2.0 |