TN-LOAM-EXT-MIB
The TN-LOAM-EXT-MIB module enables the monitoring and management of IEEE 802.3ah Clause 57 Link OAM enterprise extensions on TN hardware, specifically tracking session states, link fault signaling events, and remote fault indicators for Ethernet link diagnostics.
Imported Objects
Objects
11 total| Object Name |
|---|
tnLOAMExtMIBThe mib module for managing Link OAM (IEEE 802.3ah Clause 57) enterprise extensions. MODULE-IDENTITY .1.3.6.1.4.1.868.2.5.7 |
tnLOAMNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.868.2.5.7.0 |
tnLOAMObjects OBJECT IDENTIFIER .1.3.6.1.4.1.868.2.5.7.1 |
tnLOAMIfMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.868.2.5.7.1.1 |
tnLOAMIfMgmtTableThis table has entries which generate an synthetic indentifier for a given interface, VLAN service mapping. SEQUENCE OF TnLOAMIfMgmtEntry .1.3.6.1.4.1.868.2.5.7.1.1.1 |
tnLOAMIfMgmtEntryA entry in the table represents Link OAM management extension for an interface. TnLOAMIfMgmtEntry .1.3.6.1.4.1.868.2.5.7.1.1.1.1 |
tnLOAMIfModeCtrlThis object can be used to provision the Link OAM mode for this interface. In auto(1) mode , the interface is set to active/passive depending on if the device is in a chassis or stand-alone. Applicable to Chassis based products. In manual(2) mode lets the user choose the Link OAM mode (active/passive).rw Enumeration .1.3.6.1.4.1.868.2.5.7.1.1.1.1.1 |
tnLOAMIfClearStatsThis mib variable can be used to clear all Link OAM statisitical counters for this interface.rw Enumeration .1.3.6.1.4.1.868.2.5.7.1.1.1.1.2 |
tnLOAMIfMUXStateThe status of interface's multiplexer state.ro Enumeration .1.3.6.1.4.1.868.2.5.7.1.1.1.1.3 |
tnLOAMIfPARStateThe status of interface's Parser state.ro Enumeration .1.3.6.1.4.1.868.2.5.7.1.1.1.1.4 |
tnLOAMConformance OBJECT IDENTIFIER .1.3.6.1.4.1.868.2.5.7.2 |
More MIBs from Transition
Browse all TransitionMIBs →SNMP MIB module
The TN-MPLS-MIB module enables the monitoring and configuration of Multiprotocol Label Switching (MPLS) parameters, including label bindings, forwarding equivalence classes, and tunnel states, on Nokia (formerly Alcatel-Lucent) Service Router and IP/MPLS network devices.
Standard SNMP MIB module defining data structures for TNI-MIB.
The TN-CES-MIB module enables monitoring and management of Circuit Emulation Service (CES) sessions on network equipment, specifically tracking performance metrics such as session status, packet loss, jitter, and synchronization errors for T1/E1 circuit emulation over packet-switched networks.
The TN-LLDP-MIB module enables monitoring and management of Link Layer Discovery Protocol (LLDP) neighbor discovery data, including system identification, port descriptions, and TLV (Type-Length-Value) attributes, on Trellix (formerly McAfee) network infrastructure devices. This private MIB extension facilitates the collection of LLDP session states and neighbor topology information for network inventory and connectivity verification.
The TN-DHCP-SERVER-MIB enables monitoring and management of Dynamic Host Configuration Protocol server configurations, lease states, and address pool utilization on Tanaza network infrastructure devices. This module provides visibility into DHCP scope assignments, client binding tables, and server operational status to facilitate network address administration.