TN-LINK-OAM-MIB
AI MIB Summary
The TN-LINK-OAM-MIB module enables the monitoring and management of Link Operations, Administration, and Maintenance (OAM) parameters on TN-LINK network devices, specifically tracking session states, fault detection events, and continuity check metrics for Ethernet link integrity verification.
The mib module for managing Link OAM.
Main OID:
tnLinkOamMIB.1.3.6.1.4.1.868.2.5.140
57
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
57 total| Object Name |
|---|
tnLinkOamMIBThe mib module for managing Link OAM. MODULE-IDENTITY .1.3.6.1.4.1.868.2.5.140 |
tnLinkOamNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.868.2.5.140.0 |
tnLinkOamObjects OBJECT IDENTIFIER .1.3.6.1.4.1.868.2.5.140.1 |
tnLinkOamPortConfigTableThis table allows the user to inspect the current Link OAM port configurations, and change them as well. SEQUENCE OF TnLinkOamPortConfigEntry .1.3.6.1.4.1.868.2.5.140.1.1 |
tnLinkOamPortConfigEntryAn entry in the table that contains information of OAM port configurations. TnLinkOamPortConfigEntry .1.3.6.1.4.1.868.2.5.140.1.1.1 |
tnLinkOamLoopbackSupportControls whether the loopback support is enabled for the switch port. Link OAM remote loopback can be used for fault localization and link performance testing. Enabling the loopback support will allow the DTE to execute the remote loopback command that helps in the fault detection.rw Enumeration .1.3.6.1.4.1.868.2.5.140.1.1.1.1 |
tnLinkOamLinkMonitorSupportControls whether the Link Monitor support is enabled for the switch port. On enabling the Link Monitor support, the DTE supports event notification that permits the inclusion of diagnostic information.rw Enumeration .1.3.6.1.4.1.868.2.5.140.1.1.1.2 |
tnLinkMIBRetrievalSupportControls whether the MIB Retrieval Support is enabled for the switch port. On enabling the MIB retrieval support, the DTE supports polling of various Link OAM based MIB variables' contents.rw Enumeration .1.3.6.1.4.1.868.2.5.140.1.1.1.3 |
tnLinkOamLoopbackOperationIf the Loopback support is enabled, enabling this field will start a loopback operation for the port.rw Enumeration .1.3.6.1.4.1.868.2.5.140.1.1.1.4 |
tnLinkOamStatisticsTableThis table contains statistics for the OAM function on a particular Ethernet-like interface. There is an entry in the table for every entry in the tnLinkOamTable. The displayed counters represent the total number of OAM frames received and transmitted for the selected port. Discontinuities of these counter can occur at re-initialization of the management system. SEQUENCE OF TnLinkOamStatisticsEntry .1.3.6.1.4.1.868.2.5.140.1.2 |
tnLinkOamStatisticsEntryAn entry in the table containing statistics information on the Ethernet OAM function for a single Ethernet-like interface. TnLinkOamStatisticsEntry .1.3.6.1.4.1.868.2.5.140.1.2.1 |
tnLinkOamLinkfaultPDUsRxA count of the number of Link fault PDU's received.ro Counter32 UNITS "frames" .1.3.6.1.4.1.868.2.5.140.1.2.1.1 |
tnLinkOamLinkfaultPDUsTxA count of the number of Link fault PDU's transmitted.ro Counter32 UNITS "frames" .1.3.6.1.4.1.868.2.5.140.1.2.1.2 |
tnLinkOamDyingGaspRxA count of the number of Dying Gasp events received.ro Counter32 UNITS "frames" .1.3.6.1.4.1.868.2.5.140.1.2.1.3 |
tnLinkOamDyingGaspTxA count of the number of Dying Gasp events transmitted.ro Counter32 UNITS "frames" .1.3.6.1.4.1.868.2.5.140.1.2.1.4 |
tnLinkOamCriticalEventPDUsRxA count of the number of Critical event PDU's received.ro Counter32 UNITS "frames" .1.3.6.1.4.1.868.2.5.140.1.2.1.5 |
tnLinkOamCriticalEventPDUsTxA count of the number of Critical event PDU's transmitted.ro Counter32 UNITS "frames" .1.3.6.1.4.1.868.2.5.140.1.2.1.6 |
tnLinkOamLocalPortConfigStatusTableThis table provides Local Link OAM configuration operational status. SEQUENCE OF TnLinkOamLocalPortConfigStatusEntry .1.3.6.1.4.1.868.2.5.140.1.3 |
tnLinkOamLocalPortConfigStatusEntryAn entry in the table containing information of Peer Link OAM configuration operational status. TnLinkOamLocalPortConfigStatusEntry .1.3.6.1.4.1.868.2.5.140.1.3.1 |
tnLinkOamPDUPermissionThis field is available only for the Local DTE. It displays the current permission rules set for the local DTE. Possible values are 'Link fault', 'Receive only', 'Information exchange only', 'ANY'.ro Enumeration .1.3.6.1.4.1.868.2.5.140.1.3.1.1 |
tnLinkOamLocalMultiplexerStateWhen in forwarding state, the Device is forwarding non-OAMPDUs to the lower sublayer. Incase of discarding, the device discards all the non-OAMPDU's.ro Enumeration .1.3.6.1.4.1.868.2.5.140.1.3.1.2 |
tnLinkOamLocalParserStateWhen in forwarding state, Device is forwarding non-OAMPDUs to higher sublayer. When in loopback, Device is looping back non-OAMPDUs to the lower sublayer. When in discarding state, Device is discarding non-OAMPDUs.ro Enumeration .1.3.6.1.4.1.868.2.5.140.1.3.1.3 |
tnLinkOamLocalOrganizationalUniqueIdentifi24-bit Organizationally Unique Identifier of the vendor.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.868.2.5.140.1.3.1.4 |
tnLinkOamPeerPortConfigStatusTableThis table provides Peer Link OAM configuration operational status. SEQUENCE OF TnLinkOamPeerPortConfigStatusEntry .1.3.6.1.4.1.868.2.5.140.1.4 |
tnLinkOamPeerPortConfigStatusEntryAn entry in the table containing information of Peer Link OAM configuration operational status. TnLinkOamPeerPortConfigStatusEntry .1.3.6.1.4.1.868.2.5.140.1.4.1 |
tnLinkOamPeerMultiplexerStateWhen in forwarding state, the Device is forwarding non-OAMPDUs to the lower sublayer. Incase of discarding, the device discards all the non-OAMPDU's.ro Enumeration .1.3.6.1.4.1.868.2.5.140.1.4.1.1 |
tnLinkOamPeerParserStateWhen in forwarding state, Device is forwarding non-OAMPDUs to higher sublayer. When in loopback, Device is looping back non-OAMPDUs to the lower sublayer. When in discarding state, Device is discarding non-OAMPDUs.ro Enumeration .1.3.6.1.4.1.868.2.5.140.1.4.1.2 |
tnLinkOamPeerOrganizationalUniqueIdentifi24-bit Organizationally Unique Identifier of the vendor.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.868.2.5.140.1.4.1.3 |
tnLinkOamLinkEventStatusTableThis table shows frame error status. SEQUENCE OF TnLinkOamLinkEventStatusEntry .1.3.6.1.4.1.868.2.5.140.1.5 |
tnLinkOamLinkEventStatusEntryAn entry in the table containing information of frame error status. TnLinkOamLinkEventStatusEntry .1.3.6.1.4.1.868.2.5.140.1.5.1 |
tnLinkOamLocationIndexThe index of the loacation of the OAM unit event status accessed. When the value of index is '1', the table will display the Event status for the Local OAM unit. While the value is '2', the table will display the status for the Peer for the respective port. Unsigned32 .1.3.6.1.4.1.868.2.5.140.1.5.1.1 |
tnLinkOamSequenceNumberThis two-octet field indicates the total number of events occurred at the remote end.ro Counter32 .1.3.6.1.4.1.868.2.5.140.1.5.1.2 |
tnLinkOamFrameErrorEventTimestampThis two-octet field indicates the time reference when the event was generated, in terms of 100 ms intervals.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.868.2.5.140.1.5.1.3 |
tnLinkOamFrameErrorEventWindowThis two-octet field indicates the duration of the period in terms of 100 ms intervals. 1) The default value is one second. 2) The lower bound is one second. 3) The upper bound is one minute.ro Counter32 .1.3.6.1.4.1.868.2.5.140.1.5.1.4 |
tnLinkOamFrameErrorEventThresholdThis four-octet field indicates the number of detected errored frames in the period is required to be equal to or greater than in order for the event to be generated. 1) The default value is one frame error. 2) The lower bound is zero frame errors. 3) The upper bound is unspecified.ro Counter32 .1.3.6.1.4.1.868.2.5.140.1.5.1.5 |
tnLinkOamFrameErrorsThis four-octet field indicates the number of detected errored frames in the period.ro Counter32 .1.3.6.1.4.1.868.2.5.140.1.5.1.6 |
tnLinkOamTotalFrameErrorsThis eight-octet field indicates the sum of errored frames that have been detected since the OAM sublayer was reset.ro Counter64 .1.3.6.1.4.1.868.2.5.140.1.5.1.7 |
tnLinkOamTotalFrameErrorEventsThis four-octet field indicates the number of Errored Frame Event TLVs that have been generated since the OAM sublayer was reset.ro Counter32 .1.3.6.1.4.1.868.2.5.140.1.5.1.8 |
tnLinkOamFramePeriodErrorEventTimestampThis two-octet field indicates the time reference when the event was generated, in terms of 100 ms intervals.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.868.2.5.140.1.5.1.9 |
tnLinkOamFramePeriodErrorEventWindowThis four-octet field indicates the duration of period in terms of frames.ro Counter32 .1.3.6.1.4.1.868.2.5.140.1.5.1.10 |
tnLinkOamFramePeriodErrorEventThresholdThis four-octet field indicates the number of errored frames in the period is required to be equal to or greater than in order for the event to be generated.ro Counter32 .1.3.6.1.4.1.868.2.5.140.1.5.1.11 |
tnLinkOamFramePeriodsErrorsThis four-octet field indicates the number of frame errors in the period.ro Counter32 .1.3.6.1.4.1.868.2.5.140.1.5.1.12 |
tnLinkOamTotalFramePeriodsErrorsThis eight-octet field indicates the sum of frame errors that have been detected since the OAM sublayer was reset.ro Counter64 .1.3.6.1.4.1.868.2.5.140.1.5.1.13 |
tnLinkOamTotalFramePerioderrorEventsThis four-octet field indicates the number of Errored Frame Period Event TLVs that have been generated since the OAM sublayer was reset.ro Counter32 .1.3.6.1.4.1.868.2.5.140.1.5.1.14 |
tnLinkOamSymbolPeriodErrorEventTimestampThis two-octet field indicates the time reference when the event was generated, in terms of 100 ms intervals.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.868.2.5.140.1.5.1.15 |
tnLinkOamSymbolPeriodErrorEventWindowThis eight-octet field indicates the number of symbols in the period.ro Counter64 .1.3.6.1.4.1.868.2.5.140.1.5.1.16 |
tnLinkOamSymbolPeriodErrorEventThresholdThis eight-octet field indicates the number of errored symbols in the period is required to be equal to or greater than in order for the event to be generated.ro Counter64 .1.3.6.1.4.1.868.2.5.140.1.5.1.17 |
tnLinkOamSymbolPeriodsErrorsThis eight-octet field indicates the number of symbol errors in the period.ro Counter64 .1.3.6.1.4.1.868.2.5.140.1.5.1.18 |
tnLinkOamSymbolFramePeriodErrorsThis eight-octet field indicates the sum of symbol errors since the OAM sublayer was reset.ro Counter64 .1.3.6.1.4.1.868.2.5.140.1.5.1.19 |
tnLinkOamTotalSymbolFramePerioderrorEventsThis four-octet field indicates the number of Errored Symbol Period Event TLVs that have been generated since the OAM sublayer was reset.ro Counter32 .1.3.6.1.4.1.868.2.5.140.1.5.1.20 |
tnLinkOamEventSecondsSummaryTimestampThis two-octet field indicates the time reference when the event was generated, in terms of 100 ms intervals, encoded as a 16-bit unsigned integer.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.868.2.5.140.1.5.1.21 |
tnLinkOamEventSecondsSummaryWindowThis two-octet field indicates the duration of the period in terms of 100 ms intervals, encoded as a 16-bit unsigned integer.ro Counter32 .1.3.6.1.4.1.868.2.5.140.1.5.1.22 |
tnLinkOamEventSecondsSummaryThresholdThis two-octet field indicates the number of errored frame seconds in the period is required to be equal to or greater than in order for the event to be generated, encoded as a 16-bit unsigned integer.ro Counter32 .1.3.6.1.4.1.868.2.5.140.1.5.1.23 |
tnLinkOamEventSecondsSummarysEventsThis two-octet field indicates the number of errored frame seconds in the period, encoded as a 16-bit unsigned integer.ro Counter32 .1.3.6.1.4.1.868.2.5.140.1.5.1.24 |
tnLinkOamEventSecondsSummaryErrorTotalThis four-octet field indicates the sum of errored frame seconds that have been detected since the OAM sublayer was reset.ro Counter32 .1.3.6.1.4.1.868.2.5.140.1.5.1.25 |
tnLinkOamTotalEventSecondsSummaryEventTotalThis four-octet field indicates the number of Errored Frame Seconds Summary Event TLVs that have been generated since the OAM sublayer was reset, encoded as a 32bit unsigned integer.ro Counter32 .1.3.6.1.4.1.868.2.5.140.1.5.1.26 |
tnLinkOamConformance OBJECT IDENTIFIER .1.3.6.1.4.1.868.2.5.140.2 |