TN-FRA-MIB
The TN-FRA-MIB module facilitates the monitoring and management of transition products by exposing Fault Relay Alarm (FRA) status indicators and alarm states via SNMP. It enables network administrators to track hardware fault conditions and relay trigger events for specific vendor transition equipment.
Imported Objects
Objects
10 total| Object Name |
|---|
tnFraMIBThe mib module for managing all transition products with FRA(Fault relay alarm) MODULE-IDENTITY .1.3.6.1.4.1.868.2.5.21 |
tnFraObjects OBJECT IDENTIFIER .1.3.6.1.4.1.868.2.5.21.1 |
tnFraMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.868.2.5.21.1.1 |
tnFraRelayAlarmStateChange the state of the relay when an alarm condition is active Normal (1): Relay is activated on alarm Negated(2): Relay is de-activated on alarmrw Enumeration .1.3.6.1.4.1.868.2.5.21.1.1.1 |
tnFraPowerSupplyTableThis table is used for configuring fault relay status of the powersupply modules SEQUENCE OF TnFraPowerSupplyEntry .1.3.6.1.4.1.868.2.5.21.1.1.2 |
tnFraPowerSupplyEntryThis entry contains configuration element of tnFraPowerSupplyTable TnFraPowerSupplyEntry .1.3.6.1.4.1.868.2.5.21.1.1.2.1 |
tnFraPowerSupplyStateTrigger fault relay alarm while monitored power supply is not present Enabled(1) : Enable fault relay alarm. Disabled(2): Disable fault relay alarm.rw Enumeration .1.3.6.1.4.1.868.2.5.21.1.1.2.1.1 |
tnFraLinkTableThis table is used for configuring fault relay status of the each port SEQUENCE OF TnFraLinkEntry .1.3.6.1.4.1.868.2.5.21.1.1.3 |
tnFraLinkEntryThe entry list the tnFraLinkState priority of each port TnFraLinkEntry .1.3.6.1.4.1.868.2.5.21.1.1.3.1 |
tnFraLinkStateTrigger fault relay alarm while monitored Port is down Enabled(1) : Enable fault relay alarm of the link. Disabled(2): Disable fault relay alarm of the link.rw Enumeration .1.3.6.1.4.1.868.2.5.21.1.1.3.1.1 |
More MIBs from Transition
Browse all TransitionMIBs →SNMP MIB module
The TN-MPLS-MIB module enables the monitoring and configuration of Multiprotocol Label Switching (MPLS) parameters, including label bindings, forwarding equivalence classes, and tunnel states, on Nokia (formerly Alcatel-Lucent) Service Router and IP/MPLS network devices.
Standard SNMP MIB module defining data structures for TNI-MIB.
The TN-CES-MIB module enables monitoring and management of Circuit Emulation Service (CES) sessions on network equipment, specifically tracking performance metrics such as session status, packet loss, jitter, and synchronization errors for T1/E1 circuit emulation over packet-switched networks.
The TN-LLDP-MIB module enables monitoring and management of Link Layer Discovery Protocol (LLDP) neighbor discovery data, including system identification, port descriptions, and TLV (Type-Length-Value) attributes, on Trellix (formerly McAfee) network infrastructure devices. This private MIB extension facilitates the collection of LLDP session states and neighbor topology information for network inventory and connectivity verification.
The TN-DHCP-SERVER-MIB enables monitoring and management of Dynamic Host Configuration Protocol server configurations, lease states, and address pool utilization on Tanaza network infrastructure devices. This module provides visibility into DHCP scope assignments, client binding tables, and server operational status to facilitate network address administration.