TN-ELPS-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for TN-ELPS-MIB.
46
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
46 total| Object Name |
|---|
tnElpsMib OBJECT IDENTIFIER .1.3.6.1.4.1.868.2.5.109.2 |
tnElpsMibNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.868.2.5.109.2.0 |
tnElpsAlarmUpA Elps has a persistent defect condition. A notification
(fault alarm) is sent to the management entity with the OID
of the Elps that has detected the fault.
The management entity receiving the notification can identify
the system from the network source address of the
notification, and can identify the ELPS reporting the defect
by the indices in the OID of the variables in the notification:
tnElpsInstance - Also the index of the EPLS state table entry
(tnElpsStateTable). NOTIFICATION-TYPE .1.3.6.1.4.1.868.2.5.109.2.0.1 |
tnElpsAlarmDownA Elps has a persistent defect condition. A notification
(fault alarm) is sent to the management entity with the OID
of the Elps that has detected the fault.
The management entity receiving the notification can identify
the system from the network source address of the
notification, and can identify the ELPS reporting the defect
by the indices in the OID of the variables in the notification:
tnElpsInstance - Also the index of the EPLS state table entry
(tnElpsStateTable). NOTIFICATION-TYPE .1.3.6.1.4.1.868.2.5.109.2.0.2 |
tnElpsMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.868.2.5.109.2.1 |
tnElpsCfgMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.868.2.5.109.2.1.1 |
tnElpsCfgTableThis table provides configuration of ELPS. SEQUENCE OF TnElpsCfgEntry .1.3.6.1.4.1.868.2.5.109.2.1.1.1 |
tnElpsCfgEntryA entry in the table represents a configuration for ELPS. TnElpsCfgEntry .1.3.6.1.4.1.868.2.5.109.2.1.1.1.1 |
tnElpsInstanceThe ID of the ELPS. Unsigned32 .1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.1 |
tnElpsDomainPort: This will create a ELPS in the Port Domain. 'W/P Flow' is a Port.rw Enumeration .1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.2 |
tnElpsArchitecturePort: This will create a 1+1 ELPS.
Port: This will create a 1:1 ELPS.rw Enumeration .1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.3 |
tnElpsWFlowPortIdThe working flow for the ELPS - See 'Domain' above.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.4 |
tnElpsPFlowPortIdThe protecting flow for the ELPS - See 'Domain' above.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.5 |
tnElpsWSfMepIdThe working Signal Fail reporting MEP.rw Dot1agCfmMepId .1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.6 |
tnElpsPSfMepIdThe protecting Signal Fail reporting MEP.rw Dot1agCfmMepId .1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.7 |
tnElpsApsMepIdThe APS PDU handling MEP.rw Dot1agCfmMepId .1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.8 |
tnElpsConfiguredFalse: This ELPS is only created and has not yet been configured - is not active.
True: This ELPS is configured - is active.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.9 |
tnElpsDirectionUnidirectional: ELPS in the two ends can select traffic from different
working/protecting flow. This is only possible in case
of 1+1.
Bidirectional: ELPS in the two ends is selecting traffic from the same
working/protecting flow. This requires APS enabled.
This is mandatory for 1:1.rw Enumeration .1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.10 |
tnElpsApsEnableThe Automatic Protection Switching protocol can be enabled/disabled. This is mandatory for 1:1.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.11 |
tnElpsRevertiveEnableThe revertive switching to working flow can be enabled/disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.12 |
tnElpsWTRTimeThe Wait To Restore timing value to be used in revertive switching.rw Enumeration .1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.13 |
tnElpsHoldOffTimeThe timing value to be used to make persistent check on Signal Fail before switching.rw Enumeration .1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.14 |
tnElpsCmdNone: There is no active local command on this instance.
Clear: The active local command will be cleared.
Lock Out: This ELPS is locked to working (not active). In case of 1:N (more than one ELPS with same protecting flow) -
when one ELPS switch to protecting flow, other ELPS is enforced this command
Forced Switch: Forced switch to protecting.
Manual Switch P: Manual switch to protecting.
Manual Switch W: Manual switch to working - this is only possible in 1:1 non-revertive.
Exercise: Exercise of the protocol - not traffic effecting.
Freeze: This ELPS is locally freezed - ignoring all input.
Lock Out Local: This ELPS is locally 'locked out' - ignoring local SF detected on working.rw Enumeration .1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.15 |
tnElpsStatusThe status of the row.
The writable columns in a row can not be changed if the row
is active. All columns must have a valid value before a row
can be activated.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.868.2.5.109.2.1.1.1.1.16 |
tnElpsStateMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.868.2.5.109.2.1.2 |
tnElpsStateTableThis table provides configuration about ELPS state SEQUENCE OF TnElpsStateEntry .1.3.6.1.4.1.868.2.5.109.2.1.2.1 |
tnElpsStateEntryThis entry represents configuration about ELPS state TnElpsStateEntry .1.3.6.1.4.1.868.2.5.109.2.1.2.1.1 |
tnElpsProtectionStateELPS Protection statero TnElpsProtSwitchState .1.3.6.1.4.1.868.2.5.109.2.1.2.1.1.1 |
tnElpsWFlowStatesignalOk: State of working flow is ok
signalFail: State of working flow is Signal Fail
signalDegrade: State of working flow is Signal Degrade (for future use)ro TnElpsDefectState .1.3.6.1.4.1.868.2.5.109.2.1.2.1.1.2 |
tnElpsPFlowStatesignalOk: State of protecting flow is ok
signalFail: State of protecting flow is Signal Fail
signalDegrade: State of protecting flow is Signal Degrade (for future use)ro TnElpsDefectState .1.3.6.1.4.1.868.2.5.109.2.1.2.1.1.3 |
tnElpsTransmitRequestTypeThe transmitted request type.ro TnElpsRequestType .1.3.6.1.4.1.868.2.5.109.2.1.2.1.1.4 |
tnElpsTransmitRequestedSignalThe transmitted request signal.ro Unsigned32 .1.3.6.1.4.1.868.2.5.109.2.1.2.1.1.5 |
tnElpsTransmitBridgedSignalThe transmitted bridged signal.ro Unsigned32 .1.3.6.1.4.1.868.2.5.109.2.1.2.1.1.6 |
tnElpsReceiveRequestTypeThe requested type that is received from APS.ro TnElpsRequestType .1.3.6.1.4.1.868.2.5.109.2.1.2.1.1.7 |
tnElpsReceiveRequestedSignalThe requested signal received from APS.ro Unsigned32 .1.3.6.1.4.1.868.2.5.109.2.1.2.1.1.8 |
tnElpsReceiveBridgedSignalThe bridged signal received from APS .ro Unsigned32 .1.3.6.1.4.1.868.2.5.109.2.1.2.1.1.9 |
tnElpsArchitectureMismatchThe architecture indicated in the received APS does not match the locally configured.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.868.2.5.109.2.1.2.1.1.10 |
tnElpsAPSOnWorkingAPS is received on the working flow.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.868.2.5.109.2.1.2.1.1.11 |
tnElpsSwitchingIncompleteTraffic is not selected from the same flow instance in the two ends.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.868.2.5.109.2.1.2.1.1.12 |
tnElpsNoApsReceivedAPS PDU is not received from the other end.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.868.2.5.109.2.1.2.1.1.13 |
tnElpsLinkOverMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.868.2.5.109.2.1.3 |
tnElpsLinkOverTableThis table provides configuration about ELPS Link Over based on the SOAM DM SEQUENCE OF TnElpsLinkOverEntry .1.3.6.1.4.1.868.2.5.109.2.1.3.1 |
tnElpsLinkOverEntryThis entry represents configuration about ELPS Link Over TnElpsLinkOverEntry .1.3.6.1.4.1.868.2.5.109.2.1.3.1.1 |
tnElpsLinkOverEnabledThe feature about the DM LinkOver can be enabled and disabeld.
False: This feature is disabled.
True: This ELPS is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.868.2.5.109.2.1.3.1.1.1 |
tnElpsLinkOverDeltaValueThe Delta value is ranged from 6 to 120. If the value that is on one link subtract the other one is
larger than the delta value, the data flow will be swithed to the link that own the better DM value.rw Unsigned32 .1.3.6.1.4.1.868.2.5.109.2.1.3.1.1.2 |
tnElpsMibConformance OBJECT IDENTIFIER .1.3.6.1.4.1.868.2.5.109.2.2 |