TN-DHCP-RELAY-MIB
The TN-DHCP-RELAY-MIB module enables monitoring and configuration of DHCP relay agent parameters, including interface binding states, relay agent information (Option 82) insertion settings, and packet forwarding statistics on network devices. This module facilitates the management of DHCP relay sessions and the verification of relay agent operational status within the TN vendor infrastructure.
Imported Objects
Objects
35 total| Object Name |
|---|
tnDhcpRelayMibThe mib module for DHCP settings. MODULE-IDENTITY .1.3.6.1.4.1.868.2.5.148 |
tnDhcpRelayMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.868.2.5.148.1 |
tnDhcpRelayConfig OBJECT IDENTIFIER .1.3.6.1.4.1.868.2.5.148.1.2 |
tnDhcpRelayConfigGlobals OBJECT IDENTIFIER .1.3.6.1.4.1.868.2.5.148.1.2.1 |
tnDhcpRelayConfigGlobalsModeGlobal mode of DHCP relay. true is to enable DHCP relay and false is to disable it.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.868.2.5.148.1.2.1.1 |
tnDhcpRelayConfigGlobalsServerIpAddressServer IP address. This IP address is for DHCP server where the DHCP relay will relay DHCP packets to.rw IpAddress .1.3.6.1.4.1.868.2.5.148.1.2.1.2 |
tnDhcpRelayConfigGlobalsInformationModeIndicates the DHCP relay information mode option operation. Possible modes are - Enabled: Enable DHCP relay information mode operation. When DHCP relay information mode operation is enabled, the agent inserts specific information (option 82) into a DHCP message when forwarding to DHCP server and removes it from a DHCP message when transferring to DHCP client. It only works when DHCP relay operation mode is enabled. Disabled: Disable DHCP relay information mode operation.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.868.2.5.148.1.2.1.3 |
tnDhcpRelayConfigGlobalsInformationPolicyIndicates the DHCP relay information option policy. When DHCP relay information mode operation is enabled, if the agent receives a DHCP message that already contains relay agent information it will enforce the policy. The 'Replace' policy is invalid when relay information mode is disabled.rw TNDhcpRelayInformationPolicyType .1.3.6.1.4.1.868.2.5.148.1.2.1.4 |
tnDhcpRelayStatus OBJECT IDENTIFIER .1.3.6.1.4.1.868.2.5.148.1.3 |
tnDhcpRelayStatusStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.868.2.5.148.1.3.1 |
tnDhcpRelayStatusStatisticsServerPacketsRelayedPackets relayed from server to client.ro Unsigned32 .1.3.6.1.4.1.868.2.5.148.1.3.1.1 |
tnDhcpRelayStatusStatisticsServerPacketErrorsErrors sending packets to servers.ro Unsigned32 .1.3.6.1.4.1.868.2.5.148.1.3.1.2 |
tnDhcpRelayStatusStatisticsClientPacketsRelayedPackets relayed from client to server.ro Unsigned32 .1.3.6.1.4.1.868.2.5.148.1.3.1.3 |
tnDhcpRelayStatusStatisticsClientPacketErrorsErrors sending packets to clients.ro Unsigned32 .1.3.6.1.4.1.868.2.5.148.1.3.1.4 |
tnDhcpRelayStatusStatisticsAgentOptionErrorsNumber of packets forwarded without agent options because there was no room.ro Unsigned32 .1.3.6.1.4.1.868.2.5.148.1.3.1.5 |
tnDhcpRelayStatusStatisticsMissingAgentOptionNumber of packets dropped because no RAI option matching our ID was found.ro Unsigned32 .1.3.6.1.4.1.868.2.5.148.1.3.1.6 |
tnDhcpRelayStatusStatisticsBadCircuitIdCircuit ID option in matching RAI option did not match any known circuit ID.ro Unsigned32 .1.3.6.1.4.1.868.2.5.148.1.3.1.7 |
tnDhcpRelayStatusStatisticsMissingCircuitIdCircuit ID option in matching RAI option was missing.ro Unsigned32 .1.3.6.1.4.1.868.2.5.148.1.3.1.8 |
tnDhcpRelayStatusStatisticsBadRemoteIdRemote ID option in matching RAI option did not match any known remote ID.ro Unsigned32 .1.3.6.1.4.1.868.2.5.148.1.3.1.9 |
tnDhcpRelayStatusStatisticsMissingRemoteIdRemote ID option in matching RAI option was missing.ro Unsigned32 .1.3.6.1.4.1.868.2.5.148.1.3.1.10 |
tnDhcpRelayStatusStatisticsReceiveServerPacketsReceive DHCP message from server.ro Unsigned32 .1.3.6.1.4.1.868.2.5.148.1.3.1.11 |
tnDhcpRelayStatusStatisticsReceiveClientPacketsReceive DHCP message from client.ro Unsigned32 .1.3.6.1.4.1.868.2.5.148.1.3.1.12 |
tnDhcpRelayStatusStatisticsReceiveClientAgentOptionReceive relay agent information option from client.ro Unsigned32 .1.3.6.1.4.1.868.2.5.148.1.3.1.13 |
tnDhcpRelayStatusStatisticsReplaceAgentOptionReplace relay agent information option.ro Unsigned32 .1.3.6.1.4.1.868.2.5.148.1.3.1.14 |
tnDhcpRelayStatusStatisticsKeepAgentOptionKeep relay agent information option.ro Unsigned32 .1.3.6.1.4.1.868.2.5.148.1.3.1.15 |
tnDhcpRelayStatusStatisticsDropAgentOptionDrop relay agent information option.ro Unsigned32 .1.3.6.1.4.1.868.2.5.148.1.3.1.16 |
tnDhcpRelayControl OBJECT IDENTIFIER .1.3.6.1.4.1.868.2.5.148.1.4 |
tnDhcpRelayControlClearStatisticsThe action to clear statistics. true is to clear the statistics data. false, then, does nothing.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.868.2.5.148.1.4.1 |
tnDhcpRelayMibConformance OBJECT IDENTIFIER .1.3.6.1.4.1.868.2.5.148.2 |
tnDhcpRelayMibCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.868.2.5.148.2.1 |
tnDhcpRelayMibComplianceThe compliance statement for the implementation. Unknown .1.3.6.1.4.1.868.2.5.148.2.1.1 |
tnDhcpRelayMibGroups OBJECT IDENTIFIER .1.3.6.1.4.1.868.2.5.148.2.2 |
tnDhcpRelayConfigGlobalsInfoGroupA collection of objects suitable for bulk operations. Unknown .1.3.6.1.4.1.868.2.5.148.2.2.1 |
tnDhcpRelayStatusStatisticsInfoGroupA collection of objects suitable for bulk operations. Unknown .1.3.6.1.4.1.868.2.5.148.2.2.2 |
tnDhcpRelayControlInfoGroupA collection of objects suitable for bulk operations. Unknown .1.3.6.1.4.1.868.2.5.148.2.2.3 |
More MIBs from Transition
Browse all TransitionMIBs →SNMP MIB module
The TN-MPLS-MIB module enables the monitoring and configuration of Multiprotocol Label Switching (MPLS) parameters, including label bindings, forwarding equivalence classes, and tunnel states, on Nokia (formerly Alcatel-Lucent) Service Router and IP/MPLS network devices.
Standard SNMP MIB module defining data structures for TNI-MIB.
The TN-CES-MIB module enables monitoring and management of Circuit Emulation Service (CES) sessions on network equipment, specifically tracking performance metrics such as session status, packet loss, jitter, and synchronization errors for T1/E1 circuit emulation over packet-switched networks.
The TN-LLDP-MIB module enables monitoring and management of Link Layer Discovery Protocol (LLDP) neighbor discovery data, including system identification, port descriptions, and TLV (Type-Length-Value) attributes, on Trellix (formerly McAfee) network infrastructure devices. This private MIB extension facilitates the collection of LLDP session states and neighbor topology information for network inventory and connectivity verification.
The TN-DHCP-SERVER-MIB enables monitoring and management of Dynamic Host Configuration Protocol server configurations, lease states, and address pool utilization on Tanaza network infrastructure devices. This module provides visibility into DHCP scope assignments, client binding tables, and server operational status to facilitate network address administration.