TN-DEV-SYS-UPGRADER-MIB
AI MIB Summary
The TN-DEV-SYS-UPGRADER-MIB enables SNMP-based control and monitoring of firmware upgrade procedures specifically for ION and newer switch platforms. It exposes operational metrics and state variables required to initiate, track, and validate software image deployment and version transitions on these devices.
The mib provides functionalities for managing the upgrade procedure for ION and newer switches.
Main OID:
tnDevSysUpgraderMIB.1.3.6.1.4.1.7483.6.3.1.1.30
46
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
46 total| Object Name |
|---|
tnDevSysUpgraderMIBThe mib provides functionalities for managing the upgrade procedure for ION and newer switches. MODULE-IDENTITY .1.3.6.1.4.1.7483.6.3.1.1.30 |
tnDevSysUpgraderNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.3.1.1.30.0 |
tnUpgradeEvtA tnUpgradeEvt is sent when a sic finishes the upgrading. NOTIFICATION-TYPE .1.3.6.1.4.1.7483.6.3.1.1.30.0.1 |
tnDevSysUpgrader OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.3.1.1.30.1 |
tnUpgradeOpTableTable to manage ION upgrade operation. SEQUENCE OF TnUpgradeOpEntry .1.3.6.1.4.1.7483.6.3.1.1.30.1.1 |
tnUpgradeOpEntryAn entry containing ION upgrade action. TnUpgradeOpEntry .1.3.6.1.4.1.7483.6.3.1.1.30.1.1.1 |
upgradeOpCommandnone perform nothing.
upgrade perform the required upgrade operation. This
operation is valid only if upgradeOpStatus object
returns value 'none'.
done This operation is valid only if upgradeOpStatus
object returns value 'none'. upgrade manager would do
the required cleanup of previous upgrade
operation and make the system ready for any new
upgrade operation. This is needed because the
system maintains the status of the previous
upgrade operation for a maximum time
before it does the cleanup. During this period
no new upgrade operation is allowed.rw Enumeration .1.3.6.1.4.1.7483.6.3.1.1.30.1.1.1.1 |
upgradeOpStatusThe status of the specified operation.
none(1) - no operation was performed.
inProgress(2) - specified operation is active.ro Enumeration .1.3.6.1.4.1.7483.6.3.1.1.30.1.1.1.2 |
tnUpgradeResultTableA Table showing the result of the upgrade operation. SEQUENCE OF TnUpgradeResultEntry .1.3.6.1.4.1.7483.6.3.1.1.30.1.2 |
tnUpgradeResultEntryAn entry containing the status of the upgrade operation. TnUpgradeResultEntry .1.3.6.1.4.1.7483.6.3.1.1.30.1.2.1 |
upgradeResultIndexThis is an arbitrary interger which indentifies uniquely
an entry in this table. INTEGER .1.3.6.1.4.1.7483.6.3.1.1.30.1.2.1.1 |
upgradeResultModuleThe physical entity of the modle for which this
status is being shown.ro INTEGER .1.3.6.1.4.1.7483.6.3.1.1.30.1.2.1.2 |
upgradeResultStatusThe status of the specified operation.
none(1) - no operation was performed.
inProgress(2) - specified operation is active.
failure(3) - the selected operation has failed.
success(4) - specified operation has completed
successfully.ro Enumeration .1.3.6.1.4.1.7483.6.3.1.1.30.1.2.1.3 |
upgradeResultReasonSpecifies the description of the cause of 'failed' state
of the object 'upgradeResultStatus'.
This object would be a null string if value of
'upgradeResultStatus' is anything other than 'failure'.ro DisplayString .1.3.6.1.4.1.7483.6.3.1.1.30.1.2.1.4 |
upgradeResultTimeStartedSpecifies the time the upgrade operation was started.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.7483.6.3.1.1.30.1.2.1.5 |
upgradeResultTimeCompletedSpecifies the time the upgrade operation was completed.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.7483.6.3.1.1.30.1.2.1.6 |
tnUpgradeTargetTableA Table listing the modules to be upgraded. SEQUENCE OF TnUpgradeTargetEntry .1.3.6.1.4.1.7483.6.3.1.1.30.1.3 |
tnUpgradeTargetEntryEach entry provides the module that needs to be upgraded. TnUpgradeTargetEntry .1.3.6.1.4.1.7483.6.3.1.1.30.1.3.1 |
upgradeTargetIndexThis is an arbitrary interger which indentifies uniquely
an entry in this table. INTEGER .1.3.6.1.4.1.7483.6.3.1.1.30.1.3.1.1 |
upgradeTargetModuletarget indentified by entPhysicalIndex.rw INTEGER .1.3.6.1.4.1.7483.6.3.1.1.30.1.3.1.2 |
upgradeTargetEntryStatusThe status of this table entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7483.6.3.1.1.30.1.3.1.3 |
tnUpgradeGetIndexTableA Table listing the Index for read-create usage. SEQUENCE OF TnUpgradeGetIndexEntry .1.3.6.1.4.1.7483.6.3.1.1.30.1.4 |
tnUpgradeGetIndexEntryEach entry provides the index that needs to be used. TnUpgradeGetIndexEntry .1.3.6.1.4.1.7483.6.3.1.1.30.1.4.1 |
nextTargetIndexThis is an arbitrary interger which indentifies uniquely
an entry in ionUpgradeTarget table.ro INTEGER .1.3.6.1.4.1.7483.6.3.1.1.30.1.4.1.1 |
nextFirmwareIndexThis is an arbitrary interger which indentifies uniquely
an entry in ionFirmware table.ro INTEGER .1.3.6.1.4.1.7483.6.3.1.1.30.1.4.1.2 |
tnUpgradeFirmwareTableA Table listing the modules to be upgraded. SEQUENCE OF TnUpgradeFirmwareEntry .1.3.6.1.4.1.7483.6.3.1.1.30.1.5 |
tnUpgradeFirmwareEntryEach entry provides the module that needs to be upgraded. TnUpgradeFirmwareEntry .1.3.6.1.4.1.7483.6.3.1.1.30.1.5.1 |
upgradeFirmwareIndexThis is an arbitrary interger which indentifies uniquely
an entry in this table. INTEGER .1.3.6.1.4.1.7483.6.3.1.1.30.1.5.1.1 |
upgradeFirmwareCardTypewhich kind of SIC this firmware belongs to.ro DisplayString .1.3.6.1.4.1.7483.6.3.1.1.30.1.5.1.2 |
upgradeFirmwareRevisionfirmware revision.ro DisplayString .1.3.6.1.4.1.7483.6.3.1.1.30.1.5.1.3 |
upgradeFirmwareFileNamefirmware file name.ro DisplayString .1.3.6.1.4.1.7483.6.3.1.1.30.1.5.1.4 |
upgradeFirmwareBuildDateBuild date and time.ro DisplayString .1.3.6.1.4.1.7483.6.3.1.1.30.1.5.1.5 |
tnUpgradeFirmwareDBTableA Table to update the firmware DB. SEQUENCE OF TnUpgradeFirmwareDBEntry .1.3.6.1.4.1.7483.6.3.1.1.30.1.6 |
tnUpgradeFirmwareDBEntryAn entry provides the way to update the firmware DB. TnUpgradeFirmwareDBEntry .1.3.6.1.4.1.7483.6.3.1.1.30.1.6.1 |
upgradeFirmwareDBFileNamefirmware DB archive file name.rw DisplayString .1.3.6.1.4.1.7483.6.3.1.1.30.1.6.1.1 |
upgradeFirmwareDBOpCommandnone perform nothing.
update perform the required upgrade operation. This
operation is valid only if upgradeOpStatus object
returns value 'none'.rw Enumeration .1.3.6.1.4.1.7483.6.3.1.1.30.1.6.1.2 |
upgradeFirmwareDBOpResultThe status of the specified operation.
none(1) - no operation was performed.
inProgress(2) - specified operation is active.
failure(3) - the selected operation has failed.
success(4) - specified operation has completed
successfully.ro Enumeration .1.3.6.1.4.1.7483.6.3.1.1.30.1.6.1.3 |
upgradeFirmwareDBResultReasonSpecifies the description of the cause of 'failed' state
of the object 'upgradeResultStatus'.
This object would be a null string if value of
'upgradeFirmwareDBOpStatus' is anything other than 'failure'.ro DisplayString .1.3.6.1.4.1.7483.6.3.1.1.30.1.6.1.4 |
tnFirmwareUpgradeTableThis table contains configuration to upgrade the firmware of the device.
This applies to the stand-alone switches. SEQUENCE OF TnFirmwareUpgradeEntry .1.3.6.1.4.1.7483.6.3.1.1.30.1.7 |
tnFirmwareUpgradeEntryA entry in the table contains additional information related to a device. TnFirmwareUpgradeEntry .1.3.6.1.4.1.7483.6.3.1.1.30.1.7.1 |
fwDownloadFileThe file name to be downloaded from the TFTP server when a
download is next requested via this MIB. This value is set to
the zero-length string when no file name has been specified.rw DisplayString .1.3.6.1.4.1.7483.6.3.1.1.30.1.7.1.1 |
fwDownloadTFTPServerTypeTFTP server address type.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.6.3.1.1.30.1.7.1.2 |
fwDownloadTFTPServerThe Address of the TFTP server that contains the firmware
to load when a download is next requested via this MIB.
This value is set to zero length when no address has been
specified.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.6.3.1.1.30.1.7.1.3 |
fwDownloadActionWhen this object is set to downloadToActive(2) or
downloadToBackup(3), the device upgrades and continues until
it is time to reset. It will then
begin download of the image specified
by fwDownloadFile from the server specified by
fwDownloadTFTPServer using the TFTP protocol. If
downloadToBackup(3) is specified, the new image is downloaded
as the backup image and the device waits for the user to do active
this image and reset the device. If downloadToActive(2)
is specified, the new image is written to the flash EPROM
memory after its checksum has been verified to be correct.
When the download process is completed, the device will
warm boot to restart the newly loaded application.
When the device is not downloading, this object will have
a value of notDownloading(1). Selecting swap(4) will swap
the current and backup firmwarerw Enumeration .1.3.6.1.4.1.7483.6.3.1.1.30.1.7.1.4 |
fwDownloadStatusThe status of the last download procedure, if any. This
object will have a value of downloadStatusUnknown(2) if no
download process has been performed.ro Enumeration .1.3.6.1.4.1.7483.6.3.1.1.30.1.7.1.5 |
fwDownloadTypeSystem or peripheral download.rw Enumeration .1.3.6.1.4.1.7483.6.3.1.1.30.1.7.1.6 |