TN-DDMI-MIB
The TN-DDMI-MIB module enables monitoring of optical transceiver parameters and digital diagnostic monitoring (DDM) data, such as temperature, voltage, bias current, and optical power levels, on network interface cards within vendor-specific hardware. This private implementation extends standard DDMI capabilities to facilitate real-time link health assessment and hardware fault isolation for optical modules.
Imported Objects
Objects
49 total| Object Name |
|---|
tnDdmiMibThis is a private version of DDMI MODULE-IDENTITY .1.3.6.1.4.1.868.2.5.152 |
tnDdmiMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.868.2.5.152.1 |
tnDdmiConfig OBJECT IDENTIFIER .1.3.6.1.4.1.868.2.5.152.1.2 |
tnDdmiConfigGlobals OBJECT IDENTIFIER .1.3.6.1.4.1.868.2.5.152.1.2.1 |
tnDdmiConfigGlobalsModeGlobal operation mode of DDMI. true is to enable the functions of DDMI and false is to disable it.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.868.2.5.152.1.2.1.1 |
tnDdmiStatus OBJECT IDENTIFIER .1.3.6.1.4.1.868.2.5.152.1.3 |
tnDdmiStatusInterfaceTableThis is a DDMI status table of port interface. SEQUENCE OF TNDdmiStatusInterfaceEntry .1.3.6.1.4.1.868.2.5.152.1.3.2 |
tnDdmiStatusInterfaceEntryEach entry has a set of DDMI status. TNDdmiStatusInterfaceEntry .1.3.6.1.4.1.868.2.5.152.1.3.2.1 |
tnDdmiStatusInterfaceIfIndexLogical interface number of physical port. TNInterfaceIndex (TN-TC) .1.3.6.1.4.1.868.2.5.152.1.3.2.1.1 |
tnDdmiStatusInterfaceA0SupportedSupport transceiver status information or not. true is to supported and false is not supported.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.868.2.5.152.1.3.2.1.2 |
tnDdmiStatusInterfaceA0SfpDetectedSFP module is detected or not. true is to detected and false is not detected.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.868.2.5.152.1.3.2.1.3 |
tnDdmiStatusInterfaceA0VendorVendor name.ro TNDisplayString .1.3.6.1.4.1.868.2.5.152.1.3.2.1.4 |
tnDdmiStatusInterfaceA0PartNumberPart number.ro TNDisplayString .1.3.6.1.4.1.868.2.5.152.1.3.2.1.5 |
tnDdmiStatusInterfaceA0SerialNumberSerial number.ro TNDisplayString .1.3.6.1.4.1.868.2.5.152.1.3.2.1.6 |
tnDdmiStatusInterfaceA0RevisionRevision.ro TNDisplayString .1.3.6.1.4.1.868.2.5.152.1.3.2.1.7 |
tnDdmiStatusInterfaceA0DateCodeDate Code.ro TNDisplayString .1.3.6.1.4.1.868.2.5.152.1.3.2.1.8 |
tnDdmiStatusInterfaceA0SfpTypeSFP type. none(0) means no SFP module. notSupported(1) means SFP module is not supported. sfp100Fx(2) means SFP 100BASE-FX. sfp100BaseLx(3) means SFP 100BASE-LX. sfp100BaseBx10(4) means SFP 100BASE-BX10. sfp100BaseT(5) means SFP 100BASE-T. sfp1000BaseBx10(6) means SFP 1000BASE-BX10. sfp1000BaseT(7) means SFP 1000BASE-T. sfp1000BaseCx(8) means SFP 1000BASE-CX. sfp1000BaseSx(9) means SFP 1000BASE-SX. sfp1000BaseLx(10) means SFP 1000BASE-LX. sfp1000BaseX(11) means SFP 1000BASE-X. sfp2G5(12) means SFP 2.5G. sfp5G(13) means SFP 5G. sfp10G(14) means SFP 10G.ro TNSfpTransceiver (TN-TC) .1.3.6.1.4.1.868.2.5.152.1.3.2.1.9 |
tnDdmiStatusInterfaceA2SupportedSupport DDMI status information or not. true is to supported and false is not supported.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.868.2.5.152.1.3.2.1.1002 |
tnDdmiStatusInterfaceA2CurrentTemperatureCurrent temperature in Celcius.ro TNDisplayString .1.3.6.1.4.1.868.2.5.152.1.3.2.1.1003 |
tnDdmiStatusInterfaceA2TemperatureHighAlarmThresholdTemperature high alarm threshold in Celcius.ro TNDisplayString .1.3.6.1.4.1.868.2.5.152.1.3.2.1.1004 |
tnDdmiStatusInterfaceA2TemperatureLowAlarmThresholdTemperature low alarm threshold in Celcius.ro TNDisplayString .1.3.6.1.4.1.868.2.5.152.1.3.2.1.1005 |
tnDdmiStatusInterfaceA2TemperatureHighWarnThresholdTemperature high warning threshold in Celcius.ro TNDisplayString .1.3.6.1.4.1.868.2.5.152.1.3.2.1.1006 |
tnDdmiStatusInterfaceA2TemperatureLowWarnThresholdTemperature low warning threshold in Celcius.ro TNDisplayString .1.3.6.1.4.1.868.2.5.152.1.3.2.1.1007 |
tnDdmiStatusInterfaceA2CurrentVoltageCurrent voltage in Volt.ro TNDisplayString .1.3.6.1.4.1.868.2.5.152.1.3.2.1.1008 |
tnDdmiStatusInterfaceA2VoltageHighAlarmThresholdVoltage high alarm threshold in Volt.ro TNDisplayString .1.3.6.1.4.1.868.2.5.152.1.3.2.1.1009 |
tnDdmiStatusInterfaceA2VoltageLowAlarmThresholdVoltage low alarm threshold in Volt.ro TNDisplayString .1.3.6.1.4.1.868.2.5.152.1.3.2.1.1010 |
tnDdmiStatusInterfaceA2VoltageHighWarnThresholdVoltage high warning threshold in Volt.ro TNDisplayString .1.3.6.1.4.1.868.2.5.152.1.3.2.1.1011 |
tnDdmiStatusInterfaceA2VoltageLowWarnThresholdVoltage low warning threshold in Volt.ro TNDisplayString .1.3.6.1.4.1.868.2.5.152.1.3.2.1.1012 |
tnDdmiStatusInterfaceA2CurrentTxBiasCurrent Tx bias in mA.ro TNDisplayString .1.3.6.1.4.1.868.2.5.152.1.3.2.1.1013 |
tnDdmiStatusInterfaceA2TxBiasHighAlarmThresholdTx bias high alarm threshold in mA.ro TNDisplayString .1.3.6.1.4.1.868.2.5.152.1.3.2.1.1014 |
tnDdmiStatusInterfaceA2TxBiasLowAlarmThresholdTx bias low alarm threshold in mA.ro TNDisplayString .1.3.6.1.4.1.868.2.5.152.1.3.2.1.1015 |
tnDdmiStatusInterfaceA2TxBiasHighWarnThresholdTx bias high warning threshold in mA.ro TNDisplayString .1.3.6.1.4.1.868.2.5.152.1.3.2.1.1016 |
tnDdmiStatusInterfaceA2TxBiasLowWarnThresholdTx bias low warning threshold in mA.ro TNDisplayString .1.3.6.1.4.1.868.2.5.152.1.3.2.1.1017 |
tnDdmiStatusInterfaceA2CurrentTxPowerCurrent Tx power in mV.ro TNDisplayString .1.3.6.1.4.1.868.2.5.152.1.3.2.1.1018 |
tnDdmiStatusInterfaceA2TxPowerHighAlarmThresholdTx power high alarm threshold in mV.ro TNDisplayString .1.3.6.1.4.1.868.2.5.152.1.3.2.1.1019 |
tnDdmiStatusInterfaceA2TxPowerLowAlarmThresholdTx power low alarm threshold in mV.ro TNDisplayString .1.3.6.1.4.1.868.2.5.152.1.3.2.1.1020 |
tnDdmiStatusInterfaceA2TxPowerHighWarnThresholdTx power high warning threshold in mV.ro TNDisplayString .1.3.6.1.4.1.868.2.5.152.1.3.2.1.1021 |
tnDdmiStatusInterfaceA2TxPowerLowWarnThresholdTx power low warning threshold in mV.ro TNDisplayString .1.3.6.1.4.1.868.2.5.152.1.3.2.1.1022 |
tnDdmiStatusInterfaceA2CurrentRxPowerCurrent Rx power in mV.ro TNDisplayString .1.3.6.1.4.1.868.2.5.152.1.3.2.1.1023 |
tnDdmiStatusInterfaceA2RxPowerHighAlarmThresholdRx power high alarm threshold in mV.ro TNDisplayString .1.3.6.1.4.1.868.2.5.152.1.3.2.1.1024 |
tnDdmiStatusInterfaceA2RxPowerLowAlarmThresholdRx power low alarm threshold in mV.ro TNDisplayString .1.3.6.1.4.1.868.2.5.152.1.3.2.1.1025 |
tnDdmiStatusInterfaceA2RxPowerHighWarnThresholdRx power high warning threshold in mV.ro TNDisplayString .1.3.6.1.4.1.868.2.5.152.1.3.2.1.1026 |
tnDdmiStatusInterfaceA2RxPowerLowWarnThresholdRx power low warning threshold in mV.ro TNDisplayString .1.3.6.1.4.1.868.2.5.152.1.3.2.1.1027 |
tnDdmiMibConformance OBJECT IDENTIFIER .1.3.6.1.4.1.868.2.5.152.2 |
tnDdmiMibCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.868.2.5.152.2.1 |
tnDdmiMibComplianceThe compliance statement for the implementation. Unknown .1.3.6.1.4.1.868.2.5.152.2.1.1 |
tnDdmiMibGroups OBJECT IDENTIFIER .1.3.6.1.4.1.868.2.5.152.2.2 |
tnDdmiConfigGlobalsInfoGroupA collection of objects suitable for bulk operations. Unknown .1.3.6.1.4.1.868.2.5.152.2.2.1 |
tnDdmiStatusInterfaceTableInfoGroupA collection of objects suitable for bulk operations. Unknown .1.3.6.1.4.1.868.2.5.152.2.2.2 |
More MIBs from Transition
Browse all TransitionMIBs →SNMP MIB module
The TN-MPLS-MIB module enables the monitoring and configuration of Multiprotocol Label Switching (MPLS) parameters, including label bindings, forwarding equivalence classes, and tunnel states, on Nokia (formerly Alcatel-Lucent) Service Router and IP/MPLS network devices.
Standard SNMP MIB module defining data structures for TNI-MIB.
The TN-CES-MIB module enables monitoring and management of Circuit Emulation Service (CES) sessions on network equipment, specifically tracking performance metrics such as session status, packet loss, jitter, and synchronization errors for T1/E1 circuit emulation over packet-switched networks.
The TN-LLDP-MIB module enables monitoring and management of Link Layer Discovery Protocol (LLDP) neighbor discovery data, including system identification, port descriptions, and TLV (Type-Length-Value) attributes, on Trellix (formerly McAfee) network infrastructure devices. This private MIB extension facilitates the collection of LLDP session states and neighbor topology information for network inventory and connectivity verification.
The TN-DHCP-SERVER-MIB enables monitoring and management of Dynamic Host Configuration Protocol server configurations, lease states, and address pool utilization on Tanaza network infrastructure devices. This module provides visibility into DHCP scope assignments, client binding tables, and server operational status to facilitate network address administration.