Home/Catalog/TN-ARP-INSPECTION-MIB

TN-ARP-INSPECTION-MIB

AI MIB Summary

Standard SNMP MIB module defining data structures for TN-ARP-INSPECTION-MIB.

23
Objects
Active
Status
6
Dependencies

Imported Objects

Objects

23 total
Object Name
tnARPInspectionMIB
OBJECT IDENTIFIER
.1.3.6.1.4.1.7483.6.3.1.1.22
tnARPInspectionConfigTableTN Access Resolution Protocol Inspection Configuration Table
SEQUENCE OF TNARPInspectionConfigEntry
.1.3.6.1.4.1.7483.6.3.1.1.22.1
tnARPInspectionConfigEntryEach entry represents the ARP Inspection configuration on a device.
TNARPInspectionConfigEntry
.1.3.6.1.4.1.7483.6.3.1.1.22.1.1
tnARPInspectionModeTN ARP Inspection Mode on a device.rw
Enumeration
.1.3.6.1.4.1.7483.6.3.1.1.22.1.1.1
tnARPInspectionTranslationTranslation from Dynamic to Static for ARP Inspection.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.7483.6.3.1.1.22.1.1.2
tnARPInspectionPortModeTableTN Access Resolution Protocol Inspection port mode table.
SEQUENCE OF TNARPInspectionPortModeEntry
.1.3.6.1.4.1.7483.6.3.1.1.22.2
tnARPInspectionPortModeEntryEach entry represents ARP Inspection port mode for a port.
TNARPInspectionPortModeEntry
.1.3.6.1.4.1.7483.6.3.1.1.22.2.1
tnARPInspectionPortModeTN ARP Inspection port mode for every port.rw
Enumeration
.1.3.6.1.4.1.7483.6.3.1.1.22.2.1.1
tnStaticARPInspectionTableTN Static Access Resolution Protocol Inspection Table.
SEQUENCE OF TNStaticARPInspectionEntry
.1.3.6.1.4.1.7483.6.3.1.1.22.3
tnStaticARPInspectionEntryEach entry represents a static ARP Inspection on a device.
TNStaticARPInspectionEntry
.1.3.6.1.4.1.7483.6.3.1.1.22.3.1
tnStaticARPInspectionPortThe port number of a static ARP inspection.
INTEGER
.1.3.6.1.4.1.7483.6.3.1.1.22.3.1.1
tnStaticARPInspectionVLANThe VLAN of a static ARP inspection.
INTEGER
.1.3.6.1.4.1.7483.6.3.1.1.22.3.1.2
tnStaticARPInspectionMACThe MAC Address of a static ARP inspection.
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.7483.6.3.1.1.22.3.1.3
tnStaticARPInspectionAddrTypeThe IP Address type of a static ARP inspection. ARP only supports IPv4. For a detailed description of this type, please refer to INET-ADDRESS-MIB.
InetAddressType (INET-ADDRESS-MIB)
.1.3.6.1.4.1.7483.6.3.1.1.22.3.1.4
tnStaticARPInspectionAddrThe IP Address of a static ARP inspection. ARP only supports IPv4. For a detailed description of this type, please refer to INET-ADDRESS-MIB.
InetAddress (INET-ADDRESS-MIB)
.1.3.6.1.4.1.7483.6.3.1.1.22.3.1.5
tnStaticARPInspectionRowStatusRow Status of a static ARP inspection.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.7483.6.3.1.1.22.3.1.6
tnDynamicARPInspectionTableTN Dynamic Access Resolution Protocol Inspection Table.
SEQUENCE OF TNDynamicARPInspectionEntry
.1.3.6.1.4.1.7483.6.3.1.1.22.4
tnDynamicARPInspectionEntryEach entry represents a dynamic ARP Inspection on a device.
TNDynamicARPInspectionEntry
.1.3.6.1.4.1.7483.6.3.1.1.22.4.1
tnDynamicARPInspectionPortThe port number of a dynamic ARP inspection.
INTEGER
.1.3.6.1.4.1.7483.6.3.1.1.22.4.1.1
tnDynamicARPInspectionVLANThe VLAN of a dynamic ARP inspection.
INTEGER
.1.3.6.1.4.1.7483.6.3.1.1.22.4.1.2
tnDynamicARPInspectionMACThe MAC Address of a dynamic ARP inspection.
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.7483.6.3.1.1.22.4.1.3
tnDynamicARPInspectionAddrTypeThe IP Address of a dynamic ARP inspection. ARP only supports IPv4. For a detailed description of this type, please refer to INET-ADDRESS-MIB.ro
InetAddressType (INET-ADDRESS-MIB)
.1.3.6.1.4.1.7483.6.3.1.1.22.4.1.4
tnDynamicARPInspectionAddrThe IP Address of a dynamic ARP inspection. ARP only supports IPv4. For a detailed description of this type, please refer to INET-ADDRESS-MIB.ro
InetAddress (INET-ADDRESS-MIB)
.1.3.6.1.4.1.7483.6.3.1.1.22.4.1.5

More MIBs from Vitesse Semiconductor

Browse all Vitesse SemiconductorMIBs →
TROPIC-OPTICALPORT-MIB

The TROPIC-OPTICALPORT-MIB defines the managed object classes for monitoring and configuring optical transceiver parameters, including signal power levels, laser bias currents, and temperature, on Tropic Networks optical transport equipment. This module enables granular fault detection and performance analysis of physical layer optical interfaces by exposing standardized counters and gauges for link health validation.

3078 objects→
TROPIC-STATISTICS-MIB

The TROPIC-STATISTICS-MIB module monitors network traffic performance and anomaly detection thresholds on Tropic Networks devices by exposing raw packet counters, binned traffic distributions, and Traffic Condition Alarm (TCA) configuration parameters.

2763 objects→
TROPIC-SYSTEM-MIB

The TROPIC-SYSTEM-MIB provides standard SNMP access to Nokia network element system-level attributes, including device identity, uptime, contact information, and operational status. It enables centralized monitoring of core system health metrics such as CPU utilization, memory usage, and interface state transitions across TROPIC-based Nokia infrastructure.

1055 objects→
TROPIC-GENERIC-NOTIFICATION-MIB

The TROPIC-GENERIC-NOTIFICATION-MIB defines standard SNMP trap and inform PDU structures for Tropic Networks devices, enabling the transmission of critical operational events such as link state transitions, authentication failures, and hardware fault conditions to a management station. This module facilitates real-time alerting for network availability and security incidents by mapping vendor-specific events to generic notification objects within the Tropic ecosystem.

771 objects→
TROPIC-GLOBAL-REG

The TROPIC-GLOBAL-REG MIB module facilitates the monitoring and management of registration states, session counts, and subscriber lifecycle events on Nokia TROPIC (T1/T2) access gateways and aggregation platforms. It provides critical visibility into the operational status of user registration processes and associated resource utilization within the Nokia IP/MPLS and mobile backhaul infrastructure.

738 objects→
TROPIC-PSD-MIB

The TROPIC-PSD-MIB facilitates the monitoring and management of photonic service demarcation points on Tropic Networks optical transport equipment, specifically tracking service status, signal integrity, and interface performance metrics at the network edge.

458 objects→