TIMETRA-PIM-NG-MIB
AI MIB Summary
The TIMETRA-PIM-NG-MIB enables SNMP-based provisioning and monitoring of Protocol Independent Multicast (PIM) extensions on Alcatel-Lucent Service Router Operating System (SROS) platforms. It exposes proprietary management objects for configuring PIM neighbor relationships, interface states, and multicast routing table entries specific to the Alcatel-Lucent implementation.
This document is the SNMP MIB module to manage and provision the extensions to the PIM routing protocol for the Alcatel-Lucent SROS device.
Copyright 2008-2014 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included.
This SNMP MIB module (Specification) embodies Alcatel-Lucent's proprietary intellectual property. Alcatel-Lucent retains all title and ownership in the Specification, including any revisions.
Alcatel-Lucent grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel-Lucent products, and without fee, provided this copyright notice and license appear on all copies.
This Specification is supplied 'as is', and Alcatel-Lucent makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
Main OID:
timetraPimNgMIBModule.1.3.6.1.4.1.6527.1.1.3.50
645
Objects
Active
Status
11
Dependencies
Imported Objects
Objects
645 total| Object Name |
|---|
timetraPimNgMIBModuleThis document is the SNMP MIB module to manage and provision the
extensions to the PIM routing protocol for the Alcatel-Lucent SROS
device.
Copyright 2008-2014 Alcatel-Lucent. All rights reserved.
Reproduction of this document is authorized on the condition that
the foregoing copyright notice is included.
This SNMP MIB module (Specification) embodies Alcatel-Lucent's
proprietary intellectual property. Alcatel-Lucent retains
all title and ownership in the Specification, including any
revisions.
Alcatel-Lucent grants all interested parties a non-exclusive
license to use and distribute an unmodified copy of this
Specification in connection with management of Alcatel-Lucent
products, and without fee, provided this copyright notice and
license appear on all copies.
This Specification is supplied 'as is', and Alcatel-Lucent
makes no warranty, either express or implied, as to the use,
operation, condition, or performance of the Specification. MODULE-IDENTITY .1.3.6.1.4.1.6527.1.1.3.50 |
tmnxPimNgConformance OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.50 |
tmnxPimNgCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.50.1 |
tmnxPimNgGroups OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.50.2 |
tmnxPimNgObjs OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.50 |
vRtrPimNgProtocolObjs OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.50.1 |
vRtrPimNgGeneralTableLstChangedThe value of vRtrPimNgGeneralTableLstChanged indicates the sysUpTime
at the time of the last modification of an entry in the
vRtrPimNgGeneralTable.
If no changes were made to the table since the last re-initialization
of the local network management subsystem, then this object
contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.1.1 |
vRtrPimNgGeneralTableThe vRtrPimNgGeneralTable contains objects for general control and
management of the PIM protocol instance within a virtual router. SEQUENCE OF VRtrPimNgGeneralEntry .1.3.6.1.4.1.6527.3.1.2.50.1.2 |
vRtrPimNgGeneralEntryEach row entry represents an instance of the PIM protocol running
within a virtual router. Entries in this table cannot be
created and deleted via SNMP SET operations. An entry in this table
is created by the agent when TIMETRA-VRTR-MIB::vRtrPimStatus is
set to 'create'. The entry is destroyed when vRtrPimStatus is set
to 'delete' VRtrPimNgGeneralEntry .1.3.6.1.4.1.6527.3.1.2.50.1.2.1 |
vRtrPimNgGenRowLastChangedThe value of vRtrPimNgGenRowLastChanged indicates
the sysUpTime when this row was last modified.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.1.2.1.1 |
vRtrPimNgGenAdminStateThe value of vRtrPimNgGenAdminState specifies the current
administrative state of this PIM protocol instance
on this virtual router.
When vRtrPimNgGenAdminState is set to 'inService', the agent
attempts to enable the PIM protocol instance on this virtual router.
When vRtrPimNgGenAdminState is set to 'outOfService', the
agent attempts to disable the PIM protocol instance on this
router.rw TmnxAdminState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.2.1.2 |
vRtrPimNgGenOperStateThe value of vRtrPimNgGenOperState indicates the current
operating state of this PIM protocol instance on this router.ro TmnxOperState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.2.1.3 |
vRtrPimNgGenCreateInterfacesThe value of vRtrPimNgGenCreateInterfaces specifies the PIM
interfaces with default parameters. Setting the value of this
object to 'ies' creates all IES interfaces in PIM.
When the value of vRtrPimNgGenCreateInterfaces is set to 'all',
all IES and non IES interfaces are created in PIM.
When the value of vRtrPimNgGenCreateInterfaces is set to 'none',
all interfaces that are not manually created or modified are
removed.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.50.1.2.1.4 |
vRtrPimNgGenMaxMdtsThe value of vRtrPimNgGenMaxMdts indicates the maximum number
of Multicast Distribution Trees (MDTs) that can be configured
on the system.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.50.1.2.1.5 |
vRtrPimNgGenNonDrAttractTrafficThe value of vRtrPimNgGenNonDrAttractTraffic specifies whether the
router should ignore the designated router state and attract
traffic even when it is not the designated router. If the value
is 'true', the DR state is ignored, and if it's 'false', the
DR value is honored.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.1.2.1.6 |
vRtrPimNgGenEcmpBalanceThe value of vRtrPimNgGenEcmpBalance specifies whether the
multicast balancing of traffic over ECMP links is enabled
or not.
If the value of vRtrPimNgGenEcmpBalance is 'true', each and
every multicast stream that needs to be forwarded over an
ECMP link will be re-evaluated for the total multicast
bandwidth utilization. Re-evaluation will happen on the
ECMP interface in question.
The value of vRtrPimNgGenEcmpBalance is mutually exclusive with
the value of vRtrPimNgGenEcmpHashingEnabled in the same context.
An 'inconsistentValue' error is returned when an attempt is made
to set the value of vRtrPimNgGenEcmpBalance to 'true' when the value
of vRtrPimNgGenEcmpHashingEnabled is set to 'true'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.1.2.1.7 |
vRtrPimNgGenEcmpBalanceHoldTimeThe value of vRtrPimNgGenEcmpBalanceHoldTime specifies the
hold time in minutes that applies after an interface has been
added to the ECMP link.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.50.1.2.1.8 |
vRtrPimNgGenEcmpReBlncInProgThe value of vRtrPimNgGenEcmpReBlncInProg indicates
whether or not multicast ECMP re-balancing is currently
in progress or not.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.1.2.1.9 |
vRtrPimNgGenEcmpLastReBlncTimeThe value of vRtrPimNgGenEcmpLastReBlncTime indicates
the time when the last re-balancing occurred if the value
of vRtrPimNgGenEcmpReBlncInProg is 'false'.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.1.2.1.10 |
vRtrPimNgGenEcmpRebalanceTypeThe value of vRtrPimNgGenEcmpRebalanceType indicates the type
of ECMP rebalance.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.50.1.2.1.11 |
vRtrPimNgGenEcmpOptThresholdThe value of vRtrPimNgGenEcmpOptThreshold indicates the optional
threshold value for ECMP balancing.
This object was obsoleted from release 6.0.roobsolete Unsigned32 .1.3.6.1.4.1.6527.3.1.2.50.1.2.1.12 |
vRtrPimNgGenEcmpNextBalanceTimeThe value of vRtrPimNgGenEcmpNextBalanceTime specifies how much
time is remaining until the next rebalance would occur.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.50.1.2.1.13 |
vRtrPimNgGenLagUsageOptimizeThe value of vRtrPimNgGenLagUsageOptimize specifies whether the
router should optimize usage of the LAG such that traffic for a given
multicast stream destined to an IP interface using the LAG is sent only
to the forwarding complex that owns the LAG link on which it will
actually be forwarded.
If this optimization is turned off, the traffic will be sent to all the
forwarding complexes that own at least one link in the LAG.
Changing the value of this object causes the PIM protocol to be
restarted.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.1.2.1.14 |
vRtrPimNgGenEcmpHashingEnabledThe value of vRtrPimNgGenEcmpHashingEnabled specifies whether or not
the multicast balancing of traffic over ECMP links is hash based.
If vRtrPimNgGenEcmpHashingEnabled is 'true' then the multicast
balancing of traffic over ECMP links is done based on
Upstream Multicast Hop(UMH) algorithm.
The value of vRtrPimNgGenEcmpHashingEnabled is mutually exclusive
with the value of vRtrPimNgGenEcmpBalance in the same context.
An 'inconsistentValue' error is returned when an attempt is made
to set the value of vRtrPimNgGenEcmpHashingEnabled to 'true' when the
value of vRtrPimNgGenEcmpBalance is set to 'true'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.1.2.1.15 |
vRtrPimNgGenEnableMdtSptThe value of vRtrPimNgGenEnableMdtSpt specifies whether or not
Shortest Path Tree(SPT) switchover is enabled for the default Multicast
Data Tunnel(MDT). If set to 'true' then SPT switchover is enabled and
if set to 'false' SPT switchover is disabled. Additionally, whenever
we change the value of 'vRtrPimNgGenEnableMdtSpt', the PIM instance
must reset all MDTs and re-initiate setup.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.1.2.1.16 |
vRtrPimNgAFGenTableLstChangedThe value of vRtrPimNgAFGenTableLstChanged indicates the sysUpTime
at the time of the last modification of an entry in the
vRtrPimNgAFGenTable.
If no changes were made to the table since the last re-initialization
of the local network management subsystem, then this object
contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.1.3 |
vRtrPimNgAFGenTableThe vRtrPimNgAFGenTable contains objects for general control and
management of the PIM protocol instance within a virtual router. SEQUENCE OF VRtrPimNgAFGenEntry .1.3.6.1.4.1.6527.3.1.2.50.1.4 |
vRtrPimNgAFGenEntryEach row entry represents an instance of the PIM protocol running
within a virtual router. Entries in this table cannot be
created and deleted via SNMP SET operations. An entry in this table
is created by the agent when TIMETRA-VRTR-MIB::vRtrPimStatus is
set to 'create'. The entry is destroyed when vRtrPimStatus is set
to 'delete' VRtrPimNgAFGenEntry .1.3.6.1.4.1.6527.3.1.2.50.1.4.1 |
vRtrPimNgAFGenAFTypeThe value of vRtrPimNgAFGenAFType indicates the address family
type supported by the PIM on this instance of router. TmnxMulticastAddrFamily (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.4.1.1 |
vRtrPimNgAFGenAdminStateThe value of vRtrPimNgAFGenAdminState specifies the current
administrative state of this PIM protocol instance associated
with this address family on this virtual router.rw TmnxAdminState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.4.1.2 |
vRtrPimNgAFGenOperStateThe value of vRtrPimNgAFGenOperState indicates the current
operating state of this PIM protocol instance associated with
this address family on this router.ro TmnxOperState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.4.1.3 |
vRtrPimNgAFGenCBSRPriorityThe value of vRtrPimNgAFGenCBSRPriority specifies whether the router
is eligible to be a bootstrap router. If the value of this object
is set to zero, the router does not participate in the bootstrap
election. The highest priority is 255.rw Integer32 .1.3.6.1.4.1.6527.3.1.2.50.1.4.1.4 |
vRtrPimNgAFGenCBSRAddressTypeThe value of vRtrPimNgAFGenCBSRAddressType specifies the type of
address of the Candidate Bootstrap Router(CBSR).rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.4.1.5 |
vRtrPimNgAFGenCBSRAddressThe value of vRtrPimNgAFGenCBSRAddress specifies the type of
address of the Candidate Bootstrap Router(CBSR).
To participate in the bootstrap election, the router sends
bootstrap messages(BSM). These messages carry the BSR address
of the router.rw InetAddress .1.3.6.1.4.1.6527.3.1.2.50.1.4.1.6 |
vRtrPimNgAFGenCBSRAdminStateThe value of vRtrPimNgAFGenCBSRAdminState is used to administratively
enable or disable participating in the Bootstrap election.
Even if the value of this object is set to 'inService', if the
vRtrPimNgAFGenCBSRAddress is not set or vRtrPimNgAFGenCBSRPriority
is zero, bootstrap messages will not be sent.rw TmnxAdminState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.4.1.7 |
vRtrPimNgAFGenCBSROperStateThe value of vRtrPimNgAFGenCBSROperState indicates the operational
status of the Bootstrap mechanism.
If the value of vRtrPimNgAFGenCBSROperState is 'outOfService',
it could be because the router interface corresponding to
vRtrPimNgAFGenCBSRAddress is down or PIM is not enabled on that
interface or vRtrPimNgAFGenCBSRPriority is zero.ro TmnxOperState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.4.1.8 |
vRtrPimNgAFGenBSRAddressTypeThe value of vRtrPimNgAFGenBSRAddressType indicates the type of
address of the elected bootstrap router.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.4.1.9 |
vRtrPimNgAFGenBSRAddressThe value of vRtrPimNgAFGenBSRAddress indicates the address of
the elected bootstrap router.ro InetAddress .1.3.6.1.4.1.6527.3.1.2.50.1.4.1.10 |
vRtrPimNgAFGenBSRPriorityThe value of vRtrPimNgAFGenBSRPriority indicates the priority
of the elected bootstrap router. Higher value means higher priority.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.50.1.4.1.11 |
vRtrPimNgAFGenBSRExpiryTimeThe value of vRtrPimNgAFGenBSRExpiryTime indicates the minimum
time remaining before the elected bootstrap router will be
declared down if the value of vRtrPimNgAFGenBSRState
is not 'electedBSR'.
The value of vRtrPimNgAFGenBSRExpiryTime indicates the time
remaining before the router sends the next Bootstrap Message(BSM)
if the value of vRtrPimNgAFGenBSRState is 'electedBSR'.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.50.1.4.1.12 |
vRtrPimNgAFGenBSRStateThe value of vRtrPimNgAFGenBSRState indicates the state of
the router with respect to the bootstrap mechanism.
'candidateBSR', 'pendingBSR' and 'electedBSR' are the states of the
router participating in the Bootstrap election.
'acceptAny' and 'acceptPreferred' are the states of the router
not participating in the Bootstrap election.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.50.1.4.1.13 |
vRtrPimNgAFGenBSRUpTimeThe value of vRtrPimNgAFGenBSRUpTime indicates the time since
the current E-BSR became the elected BSR.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.50.1.4.1.14 |
vRtrPimNgAFGenCRPAddressTypeThe value of vRtrPimNgAFGenCRPAddressType specifies the type of
address of the local RP address.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.4.1.15 |
vRtrPimNgAFGenCRPAddressThe value of vRtrPimNgAFGenCRPAddress specifies the local RP address.
This address is sent in the C-RP Advertisements to the
bootstrap router.rw InetAddress .1.3.6.1.4.1.6527.3.1.2.50.1.4.1.16 |
vRtrPimNgAFGenCRPAdminStateThe value of vRtrPimNgAFGenCRPAdminState specifies whether to
enable or disable sending C-RP Advertisements to the BSR
administratively.
Even if the value of the object is set to 'inService', if the
vRtrPimNgAFGenCRPAddress is not set, C-RP messages will not be
sent to the bootstrap router.rw TmnxAdminState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.4.1.17 |
vRtrPimNgAFGenCRPOperStateThe value of vRtrPimNgAFGenCRPOperState indicates the operational
status of the C-RP mechanism. If the router is sending C-RP-Adv
messages, the value of this object will be 'inService'.ro TmnxOperState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.4.1.18 |
vRtrPimNgAFGenCRPHoldtimeThe value of vRtrPimNgAFGenCRPHoldtime specifies the hold time of the
candidate RP. It is used by the bootstrap router to timeout the
RP entries if it does not listen to another C-RP advertisement
within the holdtime period.rw Integer32 .1.3.6.1.4.1.6527.3.1.2.50.1.4.1.19 |
vRtrPimNgAFGenCRPPriorityThe value of vRtrPimNgAFGenCRPPriority specifies the router's
priority for becoming a rendezvous point (RP).
This value is used to elect RP for a group range. A value of 0
is considered as the highest priority.rw Integer32 .1.3.6.1.4.1.6527.3.1.2.50.1.4.1.20 |
vRtrPimNgAFGenMdtDefGrpAddrTypeThe value of vRtrPimNgAFGenMdtDefGrpAddrType specifies
the type of default core group address of the
Multicast Distribution Tree(MDT) for the VPRN instance.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.4.1.21 |
vRtrPimNgAFGenMdtDefGrpAddressThe value of vRtrPimNgAFGenMdtDefGrpAddress specifies the default
core group address of the Multicast Distribution Tree(MDT)
for the VPRN instance.
All the customer PIM control is sent in the service provider network
using the default group address. Customer data traffic for which
a Data MDT is not used is also sent on the default tunnel. The
Multicast Tunnel(MT) interface for a VPRN is created when this object
is set to a valid group address. The MT interface is deleted when the
object is reset to its default value.
The value of this object is not applicable when the value of
vRtrPimNgAFGenMvpnGrpAddrMode is set to 'none'.rw InetAddress .1.3.6.1.4.1.6527.3.1.2.50.1.4.1.22 |
vRtrPimNgAFGenMTIfIndexThe value of vRtrPimNgAFGenMTIfIndex indicates the interface
index of the Multicast Tunnel(MT) interface. MT interface is
created when vRtrPimNgAFGenMdtDefGrpAddress is configured with
the default core group address.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.4.1.23 |
vRtrPimNgAFGenCBSRHashMaskLenThe value of vRtrPimNgAFGenCBSRHashMaskLen specifies the length of
a mask that is to be ANDed with the group address before
the hash function is called. All groups with the same hash
map to the same RP. For example, if this value is 24, only the first
24 bits of the group addresses matter. This mechanism is used to
map one group or multiple groups to a RP.
Default values are 30 and 126 for ipv4 and ipv6 group addresses
respectively.rw Integer32 .1.3.6.1.4.1.6527.3.1.2.50.1.4.1.24 |
vRtrPimNgAFGenBSRHashMaskLenThe value of vRtrPimNgAFGenBSRHashMaskLen indicates the hash
mask length of the elected BSR.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.50.1.4.1.25 |
vRtrPimNgAFGenBSRRpfIfIndexThe value of vRtrPimNgAFGenBSRRpfIfIndex indicates the RPF interface
towards the elected BSR. The value of this object will be zero if
there is no elected BSR in the network.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.4.1.26 |
vRtrPimNgAFGenRpfLookupSequenceThe value of vRtrPimNgAFGenRpfLookupSequence specifies the sequence of
route tables that PIM uses for finding a Reverse Path Forwarding(RPF)
interface for a particular multicast route.
'mucastRouteTable' is the unicast route table to be used only by
multicast protocols(PIM) which will contain routes submitted by
multi-protocol BGP, ISIS and OSPF.
'ucastRouteTable' is the regular unicast route table which will contain
routes submitted by all the unicast routing protocols. By default,
only the 'ucastRouteTable' is looked up by PIM for calculating RPF
interface towards the source or rendezvous point. However the operator
can specify the following:
a) Use unicast route table only
b) Use multicast unicast route table only or
c) Use both the route tables.
In case of (c), PIM will always lookup first in the 'mucastRouteTable'
and if there is a route, it will use it. If PIM does not find a
route in the first lookup, it will try to find it in the
'ucastRouteTable'.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.50.1.4.1.27 |
vRtrPimNgAFGenMdtDataPrefixTypeThe value of vRtrPimNgAFGenMdtDataPrefixType specifies the address
type of vRtrPimNgAFGenMdtDataPrefix address.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.4.1.28 |
vRtrPimNgAFGenMdtDataPrefixThe value of vRtrPimNgAFGenMdtDataPrefix specifies the address used to
configure the pool of multicast addresses in the service provider
instance that can be used to generate data only
'Multicast Distribution Tree'(MDT) tunnels.
A Service Provider(SP) determines whether a particular VPN is
multicast-enabled. If it is, it corresponds to a
'Multicast Domain'(MD). For each Multicast Domain, there is a
default MDT through the backbone, connecting all of the PEs
that belong to that MD.
The configured prefix determines the maximum number of data MDT
tunnels that can be generated for the VPRN. Once this pool is
exhausted, additional (VPN-S,G) are bound to one of the in-use
data MDTs i.e. there could be multiple (VPN-S,G) entries bound
to the same data MDT when we exhaust this pool.
The value of this object is not applicable when the value of
vRtrPimNgAFGenMdtDataGrpAddrMode is set to 'none'.rw InetAddress .1.3.6.1.4.1.6527.3.1.2.50.1.4.1.29 |
vRtrPimNgAFGenMdtDataPrefixMaskThe value of vRtrPimNgAFGenMdtDataPrefixMask specifies the IP address
prefix used to configure the group address vRtrPimNgAFGenMdtDataPrefix.rw InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.4.1.30 |
vRtrPimNgAFGenMdtDataDlayIntrvlThe value of vRtrPimNgAFGenMdtDataDlayIntrvl specifies the interval
before the Provider Edge(PE) router connected to the source switches
traffic from default Multicast Distribution Tree(MDT) to the Data MDT
group. The default value is 3 seconds.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.50.1.4.1.31 |
vRtrPimNgAFGenMdtDataJoinTlvPckThe value of vRtrPimNgAFGenMdtDataJoinTlvPck specifies if packing of
MDT Join TLVs is enabled. If multiple Join TLVs are available at the
time they are transmitted, the TLVs are packed into a single UDP PDU
instead of sending each one in a separate UDP PDU. In scaling
scenarios, this packing makes more efficient use of packet buffers and
helps in better convergence. The default value is 'true'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.1.4.1.32 |
vRtrPimNgAFGenRowLastChangedThe value of vRtrPimNgAFGenRowLastChanged indicates
the sysUpTime when this row was last modified.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.1.4.1.33 |
vRtrPimNgAFGenERPThe value of vRtrPimNgAFGenERP specifies if multicast messages
are checked for embedded RP information. When vRtrPimNgAFGenERP
has a value of 'true', embedded RP is enabled and users can
configure group ranges where embedded RP information will be used.
When the value of vRtrPimNgAFGenERP is set to 'false',
embedded RP is disabled, administratively shutdown and
user configured group ranges (entries in vRtrPimNgERPGrpPrefixTable)
will be deleted.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.1.4.1.34 |
vRtrPimNgAFGenERPAdminStateThe value of vRtrPimNgAFGenERPAdminState specifies whether to
administratively enable or disable checking messages for
embedded RP information.
Value of vRtrPimNgAFGenERPAdminState is set to 'outOfService'
when the value of vRtrPimNgAFGenERP is set to 'false'.rw TmnxAdminState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.4.1.35 |
vRtrPimNgAFGenMvpnAutoDiscoveryThe value of vRtrPimNgAFGenMvpnAutoDiscovery specifies if
auto-discovery via BGP is enabled. When auto-discovery is enabled,
PIM peering on the inclusive provider tunnel is disabled.
This object is obsoleted and replaced with vRtrPimNgAFGenMvpnAD object
in 9.0 Release.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.1.4.1.36 |
vRtrPimNgAFGenMvpnCMcastSignalThe value of vRtrPimNgAFGenMvpnCMcastSignal specifies which protocol
to use, BGP or PIM, for PE-to-PE signaling of CE multicast states.
When vRtrPimNgAFGenMvpnCMcastSignal is set to 'pim' and neighbor
discovery via BGP is disabled, PIM peering will be enabled on the
inclusive tree.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.50.1.4.1.37 |
vRtrPimNgAFGenMvpnGrpAddrModeThe value of vRtrPimNgAFGenMvpnGrpAddrMode specifies which PIM mode
to use, ASM or SSM, for PIM based inclusive provider tunnels.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.50.1.4.1.38 |
vRtrPimNgAFGenMvpnSpmsiAutoDiscThe value of vRtrPimNgAFGenMvpnSpmsiAutoDisc specifies if
auto-discovery-disable via BGP is disabled.
When the value of vRtrPimNgAFGenMvpnSpmsiAutoDisc is set to 'true',
then C-trees to P-tunnels binding auto-discovery via BGP is disabled
and it is signaled using PIM join TLVs.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.1.4.1.39 |
vRtrPimNgAFGenMvpnUMHSelectionThe value of vRtrPimNgAFGenMvpnUMHSelection specifies the
selection mechanism to use for selecting Upstream Multicast Hop(UMH).
When the value of vRtrPimNgAFGenMvpnUMHSelection is set to 'highestip',
the highest IP Address is selected as UMH. When the value is set to
'hashbased', UMH selection is based on the hash based procedures. When
the value is set to 'tunnelstatus', UMH selection is based on the
state of the tunnel as well as the available unicast routes through the
tunnel.
UMH selection is supported only with RSVP-TE PMSI. Its value cannot be
modified without shutting down the MVPN instance.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.50.1.4.1.40 |
vRtrPimNgAFGenMvpnIntersiteShrdThe value of vRtrPimNgAFGenMvpnIntersiteShrd specifies whether to use
inter-site shared C-trees or not.
When the value of vRtrPimNgAFGenMvpnIntersiteShrd is set to 'enabled',
the use of inter-site shared C-trees is enabled. When the value is set
to 'disabled', the use of inter-site shared C-trees is disabled.rw TmnxEnabledDisabled (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.4.1.41 |
vRtrPimNgAFGenSSMDefRangeDisablThe value of vRtrPimNgAFGenSSMDefRangeDisabl specifies whether to
disable the use of default range (232/8) for SSM so that it can be used
by ASM to process (*,G).
When the value of vRtrPimNgAFGenSSMDefRangeDisabl is set to 'true',
the use of default range is disabled for SSM and it can be used by ASM.
When the value is set to 'false', the SSM default range is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.1.4.1.42 |
vRtrPimNgAFGenMvpnADThe value of vRtrPimNgAFGenMvpnAD specifies the auto-discovery
mechanism to be used for discovering peers using BGP.
When the value of vRtrPimNgAFGenMvpnAD is set to 'none(0)',
auto-discovery via BGP is disabled. When the value is set to
'default(1)', auto-discovery via BGP is enabled using default IPMSI AD
format. When the value is set to 'mdtSafi(2)', auto-discovery via BGP
is enabled using MDT-SAFI format.
A MDT-SAFI address is a 16-byte value consisting of 12-byte route
distinguisher(RD) followed by a 4-byte group address.
An 'inconsistentValue' error is returned if this object is set to
non-default value, when the value of TIMETRA-VRTR-MIB::vRtrInterASMvpn
is 'true'.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.50.1.4.1.43 |
vRtrPimNgAFGenMdtDataGrpAddrModeThe value of vRtrPimNgAFGenMdtDataGrpAddrMode specifies which PIM mode
to use, ASM or SSM, for PIM based selective provider tunnels.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.50.1.4.1.44 |
vRtrPimNgAFGenEnableAsmDataMdtThe value of vRtrPimNgAFGenEnableAsmDataMdt specifies whether RP join
on egress is enabled or not.
When the value of vRtrPimNgAFGenEnableAsmDataMdt is set to 'true' RP
join on egress is enabled. When its value is set to 'false' RP join
on egress is disabled and source join is used.
The value of this object is only applicable when vRtrMvpnIpmsiType is
set to 'pim'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.1.4.1.45 |
vRtrPimNgAfGenAutoRPDiscoveryThe value of vRtrPimNgAfGenAutoRPDiscovery specifies whether auto RP
is enabled in discovery mode for this PIM protocol instance.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.1.4.1.46 |
vRtrPimNgAfGenSSMAsrtCompModeThe value of vRtrPimNgAfGenSSMAsrtCompMode specifies whether SSM assert
is enabled in compatibility mode for this PIM protocol instance.
When the value of the object is set to true, for SSM groups, PIM will
consider the SPT bit to be implicitly set to compute the value of
CouldAssert(S,G,I) as defined in RFC 4601.
When the value of the object is set to false, for SSM groups, PIM will
not assume the SPT bit to be set. The SPT bit will be set by
Update_SPTbit(S,G,iif) macro defined in RFC 4601.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.1.4.1.47 |
vRtrPimNgStaticRPTableLstChngedThe value of vRtrPimNgStaticRPTableLstChnged indicates the sysUpTime
at the time of the last modification of an entry in the
vRtrPimNgStaticRPTable.
If no changes were made to the table since the last re-initialization
of the local network management subsystem, then this object
contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.1.5 |
vRtrPimNgStaticRPTableThe table contains a list of statically configured
Rendezvous Point (RP) addresses. SEQUENCE OF VRtrPimNgStaticRPEntry .1.3.6.1.4.1.6527.3.1.2.50.1.6 |
vRtrPimNgStaticRPEntryEach row entry in the vRtrPimNgStaticRPTable represents a
statically configured Rendezvous Point(RP). An entry in
this table can be created or destroyed by an SNMP SET request to
vRtrPimNgStaticRPRowStatus. VRtrPimNgStaticRPEntry .1.3.6.1.4.1.6527.3.1.2.50.1.6.1 |
vRtrPimNgStaticRPRPAddressTypeThe value of vRtrPimNgStaticRPRPAddressType indicates the
type of Rendezvous Point (RP) address indicated by
vRtrPimNgStaticRPRPAddress. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.6.1.1 |
vRtrPimNgStaticRPRPAddressThe value of vRtrPimNgStaticRPRPAddress indicates the
Rendezvous Point (RP) address that should be used by the router
for the range of multicast groups. InetAddress .1.3.6.1.4.1.6527.3.1.2.50.1.6.1.2 |
vRtrPimNgStaticRPRowStatusThe value of vRtrPimNgStaticRPRowStatus is used to
create or destroy entries in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.1.6.1.3 |
vRtrPimNgStaticRPRowLastChangedThe value of vRtrPimNgStaticRPRowLastChanged indicates
the sysUpTime when this row was last modified.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.1.6.1.4 |
vRtrPimNgStaticRPOverrideThe value of vRtrPimNgStaticRPOverride specifies the override on
the dynamic group-to-RP mappings learned by the router.
When the value of this object is set to 'true', then static
group-to-RP mappings take precedence over the dynamically learned
mappings.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.1.6.1.5 |
vRtrPimNgStGrptoRPTableLstChngdThe value of vRtrPimNgStGrptoRPTableLstChngd indicates the sysUpTime
at the time of the last modification of an entry in the
vRtrPimNgStGrptoRPTable.
If no changes were made to the table since the last re-initialization
of the local network management subsystem, then this object
contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.1.7 |
vRtrPimNgStGrptoRPTableThe table contains a list of statically configured
Rendezvous Point (RP) addresses for a multicast group range.
Entries can be created or destroyed. If this table does not
contain any entries, then the multicast group to RP mapping is
derived from the RP-Set messages received from the Bootstrap Router.
If the vRtrPimNgStaticRPTable does not contain an entry with the
specified vRtrID and vRtrPimNgStGrptoRPRPAddress, an entry
is implicitly created in the vRtrPimNgStaticRPTable. SEQUENCE OF VRtrPimNgStGrpToRPEntry .1.3.6.1.4.1.6527.3.1.2.50.1.8 |
vRtrPimNgStGrpToRPEntryEach row entry in the vRtrPimNgStGrptoRPTable represents a
group-to-RP mapping which is statically configured. An entry in
this table can be created or destroyed by an SNMP SET request to
vRtrPimNgStGrpToRPRowStatus. VRtrPimNgStGrpToRPEntry .1.3.6.1.4.1.6527.3.1.2.50.1.8.1 |
vRtrPimNgStGrptoRPRPAddrTypeThe value of vRtrPimNgStGrptoRPRPAddrType indicates the
type of Rendezvous Point (RP) address that should be used
by the router for the range of multicast groups. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.8.1.1 |
vRtrPimNgStGrptoRPRPAddressThe value of vRtrPimNgStGrptoRPRPAddress indicates the
Rendezvous Point (RP) address that should be used by the
router for the range of multicast groups. InetAddress .1.3.6.1.4.1.6527.3.1.2.50.1.8.1.2 |
vRtrPimNgStaticGroupAddrTypeThe value of vRtrPimNgStaticGroupAddrType indicates the type of
address indicated by vRtrPimNgStaticGroupAddr. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.8.1.3 |
vRtrPimNgStaticGroupAddrThe value of vRtrPimNgStaticGroupAddr combined with the value
of vRtrPimNgStaticGroupMask indicates the range of multicast
group addresses for which vRtrPimNgStGrptoRPRPAddress is the
Rendezvous Point (RP). InetAddress .1.3.6.1.4.1.6527.3.1.2.50.1.8.1.4 |
vRtrPimNgStaticGroupMaskThe value of vRtrPimNgStaticGroupMask indicates the mask which
is combined with vRtrPimNgStaticGroupAddr to get the range of
multicast group addresses for which vRtrPimNgStGrptoRPRPAddress
should be used by the router as the Rendezvous Point (RP). InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.8.1.5 |
vRtrPimNgStGrpToRPRowStatusThe value of vRtrPimNgStGrpToRPRowStatus is used to create or destroy
entries in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.1.8.1.6 |
vRtrPimNgStGrpToRPRowLstChangedThe value of vRtrPimNgStGrpToRPRowLstChanged indicates
the sysUpTime when this row was last modified.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.1.8.1.7 |
vRtrPimNgGrpSrcTableThe table listing the IP multicast sources corresponding to the
IP multicast groups. This table represents the global PIM
source, group database. SEQUENCE OF VRtrPimNgGrpSrcEntry .1.3.6.1.4.1.6527.3.1.2.50.1.9 |
vRtrPimNgGrpSrcEntryAn entry in the vRtrPimNgGrpSrcTable.
Each entry represents a source address from which receivers are
interested or not interested in receiving multicast traffic. VRtrPimNgGrpSrcEntry .1.3.6.1.4.1.6527.3.1.2.50.1.9.1 |
vRtrPimNgGrpSrcGrpAddrTypeThe value of vRtrPimNgGrpSrcGrpAddrType indicates the type of
IP multicast group address represented by
vRtrPimNgGrpSrcGroupAddress. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.9.1.1 |
vRtrPimNgGrpSrcGroupAddressThe value of vRtrPimNgGrpSrcGroupAddress indicates the IP multicast
group address for which this entry contains information. If the
vRtrPimNgGrpSrcType is 'starStarRP', the value of this object will
be zero and vRtrPimNgGrpSrcSourceAddress will contain the address
of the RP. InetAddress .1.3.6.1.4.1.6527.3.1.2.50.1.9.1.2 |
vRtrPimNgGrpSrcSrcAddrTypeThe value of vRtrPimNgGrpSrcSrcAddrType indicates the type of
IP multicast source address represented by
vRtrPimNgGrpSrcSourceAddress. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.9.1.3 |
vRtrPimNgGrpSrcSourceAddressThe value of vRtrPimNgGrpSrcSourceAddress indicates the
source address for which this entry contains information.
If vRtrPimNgGrpSrcType is 'starG', the value of this object
will be zero. If vRtrPimNgGrpSrcType is 'starstarRP', the
value of this object will be address of the RP. InetAddress .1.3.6.1.4.1.6527.3.1.2.50.1.9.1.4 |
vRtrPimNgGrpSrcTypeThe value of vRtrPimNgGrpSrcType indicates the type of this entry.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.50.1.9.1.5 |
vRtrPimNgGrpSrcRPAddrTypeThe value of vRtrPimNgGrpSrcRPAddrType indcates the type of address
of the Rendezvous Point(RP).ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.9.1.6 |
vRtrPimNgGrpSrcRPAddrThe value of vRtrPimNgGrpSrcRPAddr indicates the address of the
Rendezvous Point(RP).ro InetAddress .1.3.6.1.4.1.6527.3.1.2.50.1.9.1.7 |
vRtrPimNgGrpSrcRpfNbrAddrTypeThe value of vRtrPimNgGrpSrcRpfNbrAddrType indicates the type of
the address of the RPF neighbor.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.9.1.8 |
vRtrPimNgGrpSrcRpfNbrAddrThe value of vRtrPimNgGrpSrcRpfNbrAddr indicates the address of the
RPF neighbor.ro InetAddress .1.3.6.1.4.1.6527.3.1.2.50.1.9.1.9 |
vRtrPimNgGrpSrcRpfIfIndexThe value of vRtrPimNgGrpSrcRpfIfIndex indicates the router's
interface index on which the RPF neighbor exists.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.9.1.10 |
vRtrPimNgGrpSrcRptRpfNbrAdrTypeThe value of vRtrPimNgGrpSrcRptRpfNbrAdrType indicates the type of
address of the RPF neighbor on the RPT.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.9.1.11 |
vRtrPimNgGrpSrcRptRpfNbrAddrThe value of vRtrPimNgGrpSrcRptRpfNbrAddr indicates the address of
the RPF neighbor on the RPT.ro InetAddress .1.3.6.1.4.1.6527.3.1.2.50.1.9.1.12 |
vRtrPimNgGrpSrcMRIBNHopAddrTypeThe value of vRtrPimNgGrpSrcMRIBNHopAddrType indicates the type of
next hop address towards the RP.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.9.1.13 |
vRtrPimNgGrpSrcMRIBNextHopAddrThe value of vRtrPimNgGrpSrcMRIBNextHopAddr indicates the next hop
address towards the RP.ro InetAddress .1.3.6.1.4.1.6527.3.1.2.50.1.9.1.14 |
vRtrPimNgGrpSrcMRIBSrcFlagsThe value of vRtrPimNgGrpSrcMRIBSrcFlags indicates the MRIB
information about the source. If the entry is of type 'starG'
or 'starStarRP', it will contain information about the RP for
this group.ro Bits .1.3.6.1.4.1.6527.3.1.2.50.1.9.1.15 |
vRtrPimNgGrpSrcFlagsThe value of vRtrPimNgGrpSrcFlags contains information about the
state of the entry.
This object is applicable only for (S,G) entries,i.e., when
vRtrPimNgGrpSrcType is 'sg'.
The (S,G) sptBit is used to distinguish whether to forward on
(*,*,RP) or (*,G) or on (S,G) state. It is updated when the (S,G)
data comes on the RPF interface towards the source.
'rptPruneDesired' is set according to the PruneDesired(S,G,rpt)
algorithm.ro Bits .1.3.6.1.4.1.6527.3.1.2.50.1.9.1.16 |
vRtrPimNgGrpSrcUpstreamJpStateThe value of vRtrPimNgGrpSrcUpstreamJpState indicates the upstream
Join-Prune state. This is a result of sending PIM Join-Prune
messages towards the source or the RP.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.50.1.9.1.17 |
vRtrPimNgGrpSrcUpstreamJpTimerThe value of vRtrPimNgGrpSrcUpstreamJpTimer indicates the time
remaining before the router sends another Join message to it's
upstream neighbor.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.50.1.9.1.18 |
vRtrPimNgGrpSrcUstrmRptJpStateThe value of vRtrPimNgGrpSrcUstrmRptJpState indicates the upstream
RPT Join-Prune state. (S,G,rpt) Joins and Prunes are (S,G) Joins or
Prunes sent on the RP tree with the RPT bit set, either to modify the
results of (*,G) Joins, or to override the behavior of other
upstream LAN peers.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.50.1.9.1.19 |
vRtrPimNgGrpSrcUstrmRptOvrdeTmrThe value of vRtrPimNgGrpSrcUstrmRptOvrdeTmr indicates the delay to
triggered Join(S,G,rpt) messages to prevent implosions of triggered
messages.
If vRtrPimNgGrpSrcUstrmRptOvrdeTmr has a non-zero value, it means that
the router was in 'notPruned' state and it saw a Prune(S,G,rpt)
message being sent to RPF'(S,G,rpt).
If the router sees a Join(S,G,rpt) override message being sent by
some other router on the LAN while the timer is still non-zero,
it simply cancels the override timer. If it does not see a
Join(S,G,rpt) message, then on expiry of the override timer, it
sends it's own Join(S,G,rpt) message to RPF'(S,G,rpt). A similar
scenario exists when RPF'(S,G,rpt) changes to become equal to
RPF'(*,G).ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.50.1.9.1.20 |
vRtrPimNgGrpSrcRegisterStateThe value of vRtrPimNgGrpSrcRegisterState indicates the register
state. The register state is kept at the source DR. When the host
starts sending multicast packets and if there are no entries
programmed for that group, the source DR sends a Register packet
to the RP(G). Register state transition happen based on the register
stop timer and the response received from the RP.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.50.1.9.1.21 |
vRtrPimNgGrpSrcRegisterStopTmrThe value of vRtrPimNgGrpSrcRegisterStopTmr indicates the time
remaining before the vRtrPimNgGrpSrcRegisterState might transition
to a different state. This timer has a non-zero value when the
value of vRtrPimNgGrpSrcRegisterState is not 'noInfo'.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.50.1.9.1.22 |
vRtrPimNgGrpSrcKeepaliveTimerThe value of vRtrPimNgGrpSrcKeepaliveTimer is applicable only for
(S,G) entries. The (S,G) Keepalive Timer is updated by data being
forwarded using this (S,G) forwarding state. It is used to keep (S,G)
state alive in the absence of explicit (S,G) Joins.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.50.1.9.1.23 |
vRtrPimNgGrpSrcNumImmediateOifThe value of vRtrPimNgGrpSrcNumImmediateOif indicates the number
of interfaces in the immediate outgoing interface list. An outgoing
list can be 'immediate' if it is built directly from the state of
the relevant type as indicated by vRtrPimNgGrpSrcType.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.50.1.9.1.24 |
vRtrPimNgGrpSrcNumInheritedOifThe value of vRtrPimNgGrpSrcNumInheritedOif indicates the number of
interfaces in the inherited outgoing interface list. An 'inherited'
list inherits state from other types.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.50.1.9.1.25 |
vRtrPimNgGrpSrcNumInherRptOifThe value of vRtrPimNgGrpSrcNumInherRptOif indicates the number
of interfaces in the inherited outgoing interface list for (S,G,Rpt).ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.50.1.9.1.26 |
vRtrPimNgGrpSrcNumLclRxInclIfThe value of vRtrPimNgGrpSrcNumLclRxInclIf indicates the number
of interfaces in the local membership include interface list. Local
membership is the result of the local membership mechanism (IGMP)
running on a interface. Include list contains interfaces which are
interested in receiving multicast traffic for this source group entry.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.50.1.9.1.27 |
vRtrPimNgGrpSrcNumLclRxExclIfThe value of vRtrPimNgGrpSrcNumLclRxExclIf indicates the number
of interfaces in the local membership exclude interface list. Local
membership is the result of the local membership mechanism (IGMP)
running on the interface. Exclude list contains interfaces which are
not interested in receiving multicast traffic for this source group
entry.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.50.1.9.1.28 |
vRtrPimNgGrpSrcNumJoinPruneIfThe value of vRtrPimNgGrpSrcNumJoinPruneIf indicates the number of
interfaces on which the router received a Join or Prune message for
this source group combination.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.50.1.9.1.29 |
vRtrPimNgGrpSrcNumLostAssertIfThe value of vRtrPimNgGrpSrcNumLostAssertIf indicates the number of
interfaces on which the router lost assert for this source group
combination.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.50.1.9.1.30 |
vRtrPimNgGrpSrcUpTimeThe value of vRtrPimNgGrpSrcUpTime indicates the time since this
source group entry got created.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.50.1.9.1.31 |
vRtrPimNgGrpSrcNumSGRptPruneOifThe value of vRtrPimNgGrpSrcNumSGRptPruneOif indicates the number of
interfaces on which the router received (S,G,Rpt) prunes.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.50.1.9.1.32 |
vRtrPimNgGrpSrcRxRegFrmAnycstRPThe value of vRtrPimNgGrpSrcRxRegFrmAnycstRP indicates
whether a register message for this source group combination
was received from the anycast RP and not from the designated
router connected to the source. vRtrPimNgGrpSrcRxRegFrmAnycstRP
is not applicable when the value of vRtrPimNgGrpSrcType is
starStarRP or starG.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.1.9.1.33 |
vRtrPimNgGrpSrcRslvdByRtTblTypeThe value of vRtrPimNgGrpSrcRslvdByRtTblType indicates which
unicast routing table was used to resolve this source group entry.
The value of this object will be 'mucastRouteTable' if the
source or rendezvous point (RP) is resolved by the multicast-unicast
route table. The value of this object will be 'ucastRouteTable' if
the source or rendezvous point (RP) is resolved by the unicast
route table. The value will be 'none' if the source or RP is
unresolved.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.50.1.9.1.34 |
vRtrPimNgGrpSrcCurrFwdingRateThe value of vRtrPimNgGrpSrcCurrFwdingRate indicates the current
forwarding rate being used by a source group(S,G) entry or
(*,G) entry, where * means any source entry, for the traffic in bits
per second(bps). This forwarding rate is calculated before ingress
QoS policing or shaping is applied.ro Counter32 UNITS "bps" .1.3.6.1.4.1.6527.3.1.2.50.1.9.1.35 |
vRtrPimNgGrpSrcCurrFwdingOFRateThe value of vRtrPimNgGrpSrcCurrFwdingOFRate indicates the
number of times associated vRtrPimNgGrpSrcCurrFwdingRate
counter has overflowed.ro Counter32 UNITS "bps" .1.3.6.1.4.1.6527.3.1.2.50.1.9.1.36 |
vRtrPimNgGrpSrcCurrFwdingHCRateThe value of vRtrPimNgGrpSrcCurrFwdingHCRate indicates the current
forwarding rate being used by a source group(S,G) entry or
(*,G) entry, where * means any source entry, for the traffic in bits
per second(bps).ro Counter64 UNITS "bps" .1.3.6.1.4.1.6527.3.1.2.50.1.9.1.37 |
vRtrPimNgGrpSrcGrpSptThresholdThe value of vRtrPimNgGrpSrcGrpSptThreshold indicates the configured
threshold in kilo-bits per second(kbps) for the group to which
this (S,G) belongs. For a group G configured with a threshold,
switchover to SPT for an (S,G) is attempted only if the (S,G)'s rate
exceeds this configured threshold.ro Unsigned32 UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.50.1.9.1.38 |
vRtrPimNgGrpSrcGrpAdminBwThe value of vRtrPimNgGrpSrcGrpAdminBw indicates the administrative
bandwidth in kilo-bits per second(kbps) for the group to which
this (S,G) belongs.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.50.1.9.1.39 |
vRtrPimNgGrpSrcGrpEcmpOptThreshThe value of vRtrPimNgGrpSrcGrpEcmpOptThresh indicates the optional
threshold value for ECMP balancing.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.50.1.9.1.40 |
vRtrPimNgGrpSrcSpmsiRpfIfIndexThe value of vRtrPimNgGrpSrcSpmsiRpfIfIndex indicates in an MVPN
scenario the router's SPMSI interface index, if any, on which the RPF
neighbor exists.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.9.1.41 |
vRtrPimNgGrpSrcRpfSecNbrAddrTypThe value of vRtrPimNgGrpSrcRpfSecNbrAddrTyp indicates the type of
the address of the secondary RPF neighbor.
The value of this object is applicable only when the value of the
object vRtrPimNgAFGenMvpnUMHSelection is set to 'tunnelstatus'
indicating that the MVPN is configured with source redundancy.
When MVPN is configured with source redundancy, MVPN is capable of
receiving traffic from two different PE's for the same source.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.9.1.42 |
vRtrPimNgGrpSrcRpfSecNbrAddrThe value of vRtrPimNgGrpSrcRpfSecNbrAddr indicates the address of the
secondary RPF neighbor.
The value of this object is applicable only when the value of the
object vRtrPimNgAFGenMvpnUMHSelection is set to 'tunnelstatus'
indicating that the MVPN is configured with source redundancy.ro InetAddress .1.3.6.1.4.1.6527.3.1.2.50.1.9.1.43 |
vRtrPimNgGrpSrcRpfSecIfIndexThe value of vRtrPimNgGrpSrcRpfSecIfIndex indicates the router's
interface index on which the secondary RPF neighbor exists.
The value of this object is applicable only when the value of the
object vRtrPimNgAFGenMvpnUMHSelection is set to 'tunnelstatus'
indicating that the MVPN is configured with source redundancy.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.9.1.44 |
vRtrPimNgGrpSrcAdvtAddrTypeThe value of vRtrPimNgGrpSrcAdvtAddrType indicates the type of the
address of vRtrPimNgGrpSrcAdvtAddr.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.9.1.45 |
vRtrPimNgGrpSrcAdvtAddrThe value of vRtrPimNgGrpSrcAdvtAddr indicates the router address that
advertised the route to the source indicated by vRtrPimNgGrpSrcSourceAddress.ro InetAddress .1.3.6.1.4.1.6527.3.1.2.50.1.9.1.46 |
vRtrPimNgGrpSrcIfTableThis table lists the PIM enabled interfaces for an entry in
vRtrPimNgGrpSrcTable. SEQUENCE OF VRtrPimNgGrpSrcIfEntry .1.3.6.1.4.1.6527.3.1.2.50.1.10 |
vRtrPimNgGrpSrcIfEntryAn entry in the vRtrPimNgGrpSrcIfTable.
Each entry represents the state of the PIM enabled interface for
every vRtrPimNgGrpSrcEntry. VRtrPimNgGrpSrcIfEntry .1.3.6.1.4.1.6527.3.1.2.50.1.10.1 |
vRtrPimNgGrpSrcIfFlagsThe value of vRtrPimNgGrpSrcIfFlags indicates the different lists
that this interface belongs to.ro Bits .1.3.6.1.4.1.6527.3.1.2.50.1.10.1.1 |
vRtrPimNgGrpSrcSpmsiIfIndexThe value of vRtrPimNgGrpSrcSpmsiIfIndex indicates in an MVPN
scenario the router's SPMSI interface index, if any, corresponding to
the outgoing IPMSI interface.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.10.1.2 |
vRtrPimNgCRPGrpPrfxTblLstChngedThe value of vRtrPimNgCRPGrpPrfxTblLstChnged indicates the sysUpTime
at the time of the last modification of an entry in the
vRtrPimNgCRPGrpPrefixTable.
If no changes were made to the table since the last re-initialization
of the local network management subsystem, then this object
contains a zero value.roobsolete TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.1.11 |
vRtrPimNgCRPGrpPrefixTablevRtrPimNgCRPGrpPrefixTable lists the group prefixes for which the
router sends the Candidate RP Advertizement.
This table was obsoleted in release 7.0. It is replaced with the
vRtrPimNgCRPGrpPrefixInetTable to support ipv6 address.obsolete SEQUENCE OF VRtrPimNgCRPGrpPrefixEntry .1.3.6.1.4.1.6527.3.1.2.50.1.12 |
vRtrPimNgCRPGrpPrefixEntryAn entry in the vRtrPimNgCRPGrpPrefixTable. Each entry represents
the group prefix for which the router sends the Candidate RP
Advertizement(CRP-Adv). CRP-Adv messages are sent to the Elected
BSR router(E-BSR).obsolete VRtrPimNgCRPGrpPrefixEntry .1.3.6.1.4.1.6527.3.1.2.50.1.12.1 |
vRtrPimNgCRPGrpPrfixGrpAddrTypeThe value of vRtrPimNgCRPGrpPrfixGrpAddrType indicates the type of
address represented by vRtrPimNgCRPGrpPrefixGrpAddr.obsolete InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.12.1.1 |
vRtrPimNgCRPGrpPrefixGrpAddrThe value of vRtrPimNgCRPGrpPrefixGrpAddr combined with the value of
vRtrPimNgCRPGrpPrefixGrpMask indicates the range of multicast group
addresses for which the router advertizes to be the Candidate RP.
The value of vRtrPimNgAFGenCRPAddress is sent as the RP address.obsolete InetAddress .1.3.6.1.4.1.6527.3.1.2.50.1.12.1.2 |
vRtrPimNgCRPGrpPrefixGrpMaskThe value of vRtrPimNgCRPGrpPrefixGrpMask indicates the mask which
is combined with the value of vRtrPimNgCRPGrpPrefixGrpAddr to get
the range of multicast group addresses for which the router
advertizes to be the Candidate RP. The value of vRtrPimNgAFGenCRPAddress
is sent as the RP address.obsolete IpAddressPrefixLength (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.12.1.3 |
vRtrPimNgCRPGrpPrefixRowStatusThe value of vRtrPimNgCRPGrpPrefixRowStatus is used to create or
destroy entries in this table.rwobsolete RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.1.12.1.4 |
vRtrPimNgCRPGrpPrfixRowLstChngdThe value of vRtrPimNgCRPGrpPrfixRowLstChngd indicates
the sysUpTime when this row was last modified.roobsolete TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.1.12.1.5 |
vRtrPimNgCRPTablevRtrPimNgCRPTable lists the C-RP's and the group prefixes sent in the
C-RP advertisement. vRtrPimNgCRPTable will be empty on all routers
except the elected BSR router.
This table was obsoleted in release 7.0. It is replaced with the
vRtrPimNgCRPInetTable to support ipv6 address.obsolete SEQUENCE OF VRtrPimNgCRPEntry .1.3.6.1.4.1.6527.3.1.2.50.1.13 |
vRtrPimNgCRPEntryAn entry in the vRtrPimNgCRPTable. It is created when the Elected BSR
receives a Candidate-RP Advertizement from the C-RP's.obsolete VRtrPimNgCRPEntry .1.3.6.1.4.1.6527.3.1.2.50.1.13.1 |
vRtrPimNgCRPAddressTypeThe value of vRtrPimNgCRPAddressType indicates the type of address
of the Candidate RP.obsolete InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.13.1.1 |
vRtrPimNgCRPAddressThe value of vRtrPimNgCRPAddress indicates the Candidate RP address.obsolete InetAddress .1.3.6.1.4.1.6527.3.1.2.50.1.13.1.2 |
vRtrPimNgCRPGrpAddrTypeThe value of vRtrPimNgCRPGrpAddrType indicates the type of the
address represented by vRtrPimNgCRPGrpAddr.obsolete InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.13.1.3 |
vRtrPimNgCRPGrpAddrThe value of vRtrPimNgCRPGrpAddr combined with the value of
vRtrPimNgCRPGrpMask indicates the range of multicast group
addresses for which vRtrPimNgCRPAddress is the Candidate RP.obsolete InetAddress .1.3.6.1.4.1.6527.3.1.2.50.1.13.1.4 |
vRtrPimNgCRPGrpMaskThe value of vRtrPimNgCRPGrpMask indicates the mask which is
combined with vRtrPimNgCRPGrpAddr to get the range of multicast
group addresses for which vRtrPimNgCRPAddress is the Candidate RP.obsolete IpAddressPrefixLength (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.13.1.5 |
vRtrPimNgCRPHoldtimeThe value of vRtrPimNgCRPHoldtime indicates the hold time of the
candidate RP. It is used by the bootstrap router to timeout the
RP entries if it does not listen to another C-RP advertisement
within the holdtime period.roobsolete Integer32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.50.1.13.1.6 |
vRtrPimNgCRPPriorityThe value of vRtrPimNgCRPPriority indicates the Candidate RP's
priority for becoming a rendezvous point (RP). This value is
used to elect RP for a group range. A value of 0 is considered
as the highest priority.roobsolete Integer32 .1.3.6.1.4.1.6527.3.1.2.50.1.13.1.7 |
vRtrPimNgCRPExpiryTimeThe value of vRtrPimNgCRPExpiryTime indicates the minimum time
remaining before the Candidate-RP will be declared down.
If the local router is not the BSR, this value is 0.roobsolete Integer32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.50.1.13.1.8 |
vRtrPimNgRPSetTableThis table lists the RP Set sent by the Elected BSR in the
Bootstrap Messages(BSM) or the RP Set sent by the Mapping Agent
in case of Auto-RP. It also contains the static entries in
vRtrPimNgStGrptoRPTable. The router uses this table to calculate
the group-to-RP mappings.
This table was obsoleted in release 7.0. It is replaced with the
vRtrPimNgRPSetInetTable to support ipv6 address.obsolete SEQUENCE OF VRtrPimNgRPSetEntry .1.3.6.1.4.1.6527.3.1.2.50.1.14 |
vRtrPimNgRPSetEntryAn entry in the vRtrPimNgRPSetTable. It is created by the elected BSR
when it receives the Candidate-RP-Adv messages. Other routers create
this entry on receiving Bootstrap Message(BSM) sent by the elected
BSR router. It can also be created when a router receives a Mapping
message from the Auto-RP Mapping Agent.obsolete VRtrPimNgRPSetEntry .1.3.6.1.4.1.6527.3.1.2.50.1.14.1 |
vRtrPimNgRPSetTypevRtrPimNgRPSetType is an index into this table. It indicates whether
the entry was learned through the bootstrap mechanism or if it was
statically configured using the vRtrPimNgStGrptoRPTable.obsolete Enumeration .1.3.6.1.4.1.6527.3.1.2.50.1.14.1.1 |
vRtrPimNgRPSetGrpAddrTypeThe value of vRtrPimNgRPSetGrpAddrType indicates the type of
address represented by vRtrPimNgRPSetGrpAddr.obsolete InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.14.1.2 |
vRtrPimNgRPSetGrpAddrThe value of vRtrPimNgRPSetGrpAddr, combined with the value of
vRtrPimNgRPSetGrpMask,
indicates the range of multicast group addresses for which
vRtrPimNgRPSetCRPAddress is the Candidate RP.obsolete InetAddress .1.3.6.1.4.1.6527.3.1.2.50.1.14.1.3 |
vRtrPimNgRPSetGrpMaskvRtrPimNgRPSetGrpMask indicates the mask which is combined
with vRtrPimNgRPSetGrpAddr to get the range of multicast group
addresses for which vRtrPimNgRPSetCRPAddress is the candidate RP.obsolete IpAddressPrefixLength (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.14.1.4 |
vRtrPimNgRPSetCRPAddrTypeThe value of vRtrPimNgRPSetCRPAddrType indicates the type of
address of the Candidate RP address.obsolete InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.14.1.5 |
vRtrPimNgRPSetCRPAddressThe value of vRtrPimNgRPSetCRPAddress indicates the
Candidate RP address.obsolete InetAddress .1.3.6.1.4.1.6527.3.1.2.50.1.14.1.6 |
vRtrPimNgRPSetHoldtimeThe value of vRtrPimNgRPSetHoldtime indicates the hold time of the
candidate RP. It is used by the bootstrap router to timeout the
RP entries if it does not listen to another C-RP advertisement
within the holdtime period. The value of vRtrPimNgRPSetHoldtime will
be zero for static entries.roobsolete Integer32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.50.1.14.1.7 |
vRtrPimNgRPSetPriorityThe value of vRtrPimNgRPSetPriority indicates the Candidate RP's
priority for becoming a rendezvous point (RP). This value is used
to elect RP for a group range. A value of 0 is considered as the
highest priority. For static entries, the priority is always 1.roobsolete Integer32 .1.3.6.1.4.1.6527.3.1.2.50.1.14.1.8 |
vRtrPimNgRPSetExpiryTimeThe value of vRtrPimNgRPSetExpiryTime indicates the minimum time
remaining before the RP Set group prefix will be declared down.roobsolete Unsigned32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.50.1.14.1.9 |
vRtrPimNgGenStatTablevRtrPimNgGenStatTable lists PIM statistics for a particular
PIM instance. SEQUENCE OF VRtrPimNgGenStatEntry .1.3.6.1.4.1.6527.3.1.2.50.1.15 |
vRtrPimNgGenStatEntryAn entry in the vRtrPimNgGenStatTable. VRtrPimNgGenStatEntry .1.3.6.1.4.1.6527.3.1.2.50.1.15.1 |
vRtrPimNgGenStatTxCrpaPdusThe value of vRtrPimNgGenStatTxCrpaPdus indicates the number of PIM
Candidate-RP Advertisements (C-RP-Adv) transmitted by this router
instance.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.1.15.1.1 |
vRtrPimNgGenStatTxCrpaPduErrsThe value of vRtrPimNgGenStatTxCrpaPduErrs indicates the number of
errors while transmitting PIM Candidate-RP Advertizements (C-RP-Adv).ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.1.15.1.2 |
vRtrPimNgGenStatRxCrpaPdusThe value of vRtrPimNgGenStatRxCrpaPdus indicates the number of PIM
Candidate-RP Advertizements (C-RP-Adv) received by this instance.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.1.15.1.3 |
vRtrPimNgGenStatRxCrpaPduDropsThe value of vRtrPimNgGenStatRxCrpaPduDrops indicates the number of
PIM Candidate-RP Advertizements (C-RP-Adv) received by this instance,
but were dropped.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.1.15.1.4 |
vRtrPimNgGenStatStarStarRPTypesThe value of vRtrPimNgGenStatStarStarRPTypes indicates the number of
entries in vRtrPimNgGrpSrcTable for which vRtrPimNgGrpSrcType is
'starStarRP'.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.50.1.15.1.5 |
vRtrPimNgGenStatStarGTypesThe value of vRtrPimNgGenStatStarGTypes indicates the number of
entries in vRtrPimNgGrpSrcTable for which vRtrPimNgGrpSrcType is
'starG'.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.50.1.15.1.6 |
vRtrPimNgGenStatSGTypesThe value of vRtrPimNgGenStatSGTypes indicates the number of
entries in vRtrPimNgGrpSrcTable for which vRtrPimNgGrpSrcType is
'sg'.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.50.1.15.1.7 |
vRtrPimNgGenStatTxRegistersThe value of vRtrPimNgGenStatTxRegisters indicates the number of PIM
Register messages transmitted by this instance.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.1.15.1.8 |
vRtrPimNgGenStatTxRegisterErrsThe value of vRtrPimNgGenStatTxRegisterErrs indicates the number
the times there was an error while transmitting PIM
Register messages by this instance.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.1.15.1.9 |
vRtrPimNgGenStatTxNullRegistersThe value of vRtrPimNgGenStatTxNullRegisters indicates the number of
PIM Null Register messages transmitted by this instance.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.1.15.1.10 |
vRtrPimNgGenStatTxRegTTLDropsThe value of vRtrPimNgGenStatTxRegTTLDrops indicates the number
of multicast data packets which could not be encapsulated in Register
messages because the Time To Live (TTL) was zero.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.1.15.1.11 |
vRtrPimNgGenStatForwardCrpaPdusThe value of vRtrPimNgGenStatForwardCrpaPdus indicates the number of
Candidate-RP Advertizements(C-RP-Adv) that were forwarded by the
router. C-RP-Adv's are forwarded when the received advertizement
has a router alert set and the destination address is not the
router's local address.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.1.15.1.12 |
vRtrPimNgGenStatFwdCrpaDropsThe value of vRtrPimNgGenStatFwdCrpaDrops indicates the number of
times the Candidate-RP Advertizements(C-RP-Adv) could not be forwarded
by the router.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.1.15.1.13 |
vRtrPimNgGenStatTxMdtJoinTlvsThe value of vRtrPimNgGenStatTxMdtJoinTlvs indicates the number of
times MDT Join TLV were transmitted.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.1.15.1.14 |
vRtrPimNgGenStatRxMdtJoinTlvsThe value of vRtrPimNgGenStatRxMdtJoinTlvs indicates the number of
times MDT Join TLV were received.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.1.15.1.15 |
vRtrPimNgGenStatTxMdtJnTlvErrsThe value of vRtrPimNgGenStatTxMdtJnTlvErrs indicates indicates the
number of times MDT Join TLV could not be transmitted.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.1.15.1.16 |
vRtrPimNgGenStatRxMdtJnTlvErrsThe value of vRtrPimNgGenStatRxMdtJnTlvErrs indicates indicates
number of times MDT Join TLVs were dropped due to errors in the
received TLV.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.1.15.1.17 |
vRtrPimNgGenStatTxActiveMdtsThe value of vRtrPimNgGenStatTxActiveMdts indicates the number of
active MDTs on which the PE is forwarding packets. This object is
applicable to VPRNs only.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.50.1.15.1.18 |
vRtrPimNgGenStatRxActiveMdtsThe value of vRtrPimNgGenStatRxActiveMdts indicates number of active
Mdts on which the PE is receiving packets. This object is applicable
to VPRNs only.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.50.1.15.1.19 |
vRtrPimNgGenStatTxSpmsiLimitHitsThe value of vRtrPimNgGenStatTxSpmsiLimitHits indicates the number of
times the switch from ipmsi to spmsi is failed because of reaching the
maximum spmsi limit configured in
TIMETRA-VRTR-MIB::vRtrMvpnSpmsiMaxLimit.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.1.15.1.20 |
vRtrPimNgGenStatRxCtrlPduIfDropsThe value of vRtrPimNgGenStatRxCtrlPduIfDrops indicates the number of
control PDU drops on an interface which is operationally down or on an
interface on which PIM is not enabled.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.1.15.1.21 |
vRtrPimNgGenStatP2mpPmsiReqFailsThe value of vRtrPimNgGenStatP2mpPmsiReqFails indicates the number of
times a P2MP PMSI tunnel request has failed.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.1.15.1.22 |
vRtrPimNgGenStatP2mpPmsiCrtFailsThe value of vRtrPimNgGenStatP2mpPmsiCrtFails indicates the number of
times a P2MP PMSI tunnel creation has failed.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.1.15.1.23 |
vRtrPimNgGenStatTxMdtsThe value of vRtrPimNgGenStatTxMdts indicates the number of MDTs
created by the PE for forwarding packets. This object is applicable to
VPRNs only.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.1.15.1.24 |
vRtrPimNgGenStatRxMdtsThe value of vRtrPimNgGenStatRxMdts indicates the number of MDTs
created by the PE for receiving packets. This object is applicable to
VPRNs only.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.1.15.1.25 |
vRtrPimNgGrpSrcStatTablevRtrPimNgGrpSrcStatTable contains statistics for the
entries in the vRtrPimNgGrpSrcTable. These statistics are
collected by the forwarding engine. SEQUENCE OF VRtrPimNgGrpSrcStatEntry .1.3.6.1.4.1.6527.3.1.2.50.1.16 |
vRtrPimNgGrpSrcStatEntryAn entry in the vRtrPimNgGrpSrcStatTable. VRtrPimNgGrpSrcStatEntry .1.3.6.1.4.1.6527.3.1.2.50.1.16.1 |
vRtrPimNgGrpSrcStatFrwdedPktsThe value of vRtrPimNgGrpSrcStatFrwdedPkts indicates the number
of multicast packets that were forwarded to the interfaces in the
outgoing interface list. vRtrPimNgGrpSrcIfTable lists all the
interfaces in the outgoing interface list. This packet count is
calculated before ingress QoS policing or shaping is applied.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.1.16.1.1 |
vRtrPimNgGrpSrcStatOFFrwdedPktsThe value of vRtrPimNgGrpSrcStatOFFrwdedPkts indicates the number
of times the associated vRtrPimNgGrpSrcStatFrwdedPkts counter has
overflowed.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.1.16.1.2 |
vRtrPimNgGrpSrcStatHCFrwdedPktsThe value of vRtrPimNgGrpSrcStatHCFrwdedPkts indicates the number
of multicast packets that were forwarded to the interfaces in the
outgoing interface list. vRtrPimNgGrpSrcIfTable lists all the
interfaces in the outgoing interface list.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.50.1.16.1.3 |
vRtrPimNgGrpSrcStatDscrdPktsThe value of vRtrPimNgGrpSrcStatDscrdPkts indicates the number
of multicast packets that matched this source group entry but were
discarded. For (S,G) entries, if the traffic is getting forwarded on
the SPT, the packets arriving from the RPT will be discarded.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.1.16.1.4 |
vRtrPimNgGrpSrcStatOFDscrdPktsThe value of vRtrPimNgGrpSrcStatOFDscrdPkts indicates the number
of times the associated vRtrPimNgGrpSrcStatDscrdPkts counter has
overflowed.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.1.16.1.5 |
vRtrPimNgGrpSrcStatHCDscrdPktsThe value of vRtrPimNgGrpSrcStatHCDscrdPkts indicates the number
of multicast packets that matched this source group entry but were
discarded. For (S,G) entries, if the traffic is getting forwarded on
the SPT, the packets arriving from the RPT will be discarded.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.50.1.16.1.6 |
vRtrPimNgGrpSrcStatRPFMsmtchThe value of vRtrPimNgGrpSrcStatRPFMsmtch indicates
the number of multicast packets that matched this source
group entry but they did not arrive on the the interface
indicated by vRtrPimNgGrpSrcRpfIfIndex.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.1.16.1.7 |
vRtrPimNgGrpSrcStatOFRPFMsmtchThe value of vRtrPimNgGrpSrcStatOFRPFMsmtch indicates the number
of times the associated vRtrPimNgGrpSrcStatRPFMsmtch counter has
overflowed.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.1.16.1.8 |
vRtrPimNgGrpSrcStatHCRPFMsmtchThe value of vRtrPimNgGrpSrcStatHCRPFMsmtch indicates
the number of multicast packets that matched this source
group entry but they did not arrive on the the interface
indicated by vRtrPimNgGrpSrcRpfIfIndex.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.50.1.16.1.9 |
vRtrPimNgGrpSrcStatFrdedOctThe value of vRtrPimNgGrpSrcStatFrdedOct indicates
the number of multicast octets that were forwarded to the
interfaces in the outgoing interface list. vRtrPimNgGrpSrcIfTable
lists all the interfaces in the outgoing interface list.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.1.16.1.10 |
vRtrPimNgGrpSrcStatOFFrdedOctThe value of vRtrPimNgGrpSrcStatOFFrdedOct indicates the number
of times the associated vRtrPimNgGrpSrcStatFrdedOct counter has
overflowed.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.1.16.1.11 |
vRtrPimNgGrpSrcStatHCFrdedOctThe value of vRtrPimNgGrpSrcStatHCFrdedOct indicates
the number of multicast octets that were forwarded to the
interfaces in the outgoing interface list. vRtrPimNgGrpSrcIfTable
lists all the interfaces in the outgoing interface list.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.50.1.16.1.12 |
vRtrPimNgGenPolicyTablevRtrPimNgGenPolicyTable lists PIM policies for a particular PIM
instance.
PIM Join-Prune and Register policies provide a way to to control the
creation of (*,G) or (S,G) state that gets created on a router.
The bootstrap policies provide a way to control the flow of bootstrap
messages to and from the router.
PIM Policies are created using the
TIMETRA-ROUTE-POLICY-MIB::tRPAdminPSFromCriteriaTable. SEQUENCE OF VRtrPimNgGenPolicyEntry .1.3.6.1.4.1.6527.3.1.2.50.1.17 |
vRtrPimNgGenPolicyEntryAn entry in the vRtrPimNgGenPolicyTable. Each entry corresponds to an
entry in the vRtrPimNgGeneralTable. Entries in this table are
created implicitly whenever an entry is created in the
vRtrPimNgGeneralTable. VRtrPimNgGenPolicyEntry .1.3.6.1.4.1.6527.3.1.2.50.1.17.1 |
vRtrPimNgImportJoinPrunePolicy1vRtrPimNgImportJoinPrunePolicy1 is the the first policy to
be used for determining how the PIM Join-Prune messages
are filtered. Join-Prune messages can be filtered based on
different criteria such as multicast group or source address
contained in the message, interface on which the messages are
received or the address of the neighbor who is sending the message.
If multiple policy names are specified, the policies are evaluated
in the order they are specified. The first policy that matches
is applied.
The import policy name list, vRtrPimNgImportJoinPrunePolicy1
through vRtrPimNgImportJoinPrunePolicy5, is handled by the SNMP
agent as a single entity. When an SNMP SET request is received
to modify one or more of the policy names, all the policy
variables are first set to the empty string, ''H, and then the
new names are set into the specified policy variables within a
single SNMP SET PDU.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.17.1.1 |
vRtrPimNgImportJoinPrunePolicy2vRtrPimNgImportJoinPrunePolicy2 is the second policy to
be used for determining how the PIM Join-Prune messages
are filtered. Join-Prune messages can be filtered based on
different criteria such as multicast group or source address
contained in the message, interface on which the messages are
received or the address of the neighbor who is sending the message.
If multiple policy names are specified, the policies are evaluated
in the order they are specified. The first policy that matches
is applied.
The import policy name list, vRtrPimNgImportJoinPrunePolicy1
through vRtrPimNgImportJoinPrunePolicy5, is handled by the SNMP
agent as a single entity. When an SNMP SET request is received
to modify one or more of the policy names, all the policy
variables are first set to the empty string, ''H, and then the
new names are set into the specified policy variables within
a single SNMP SET PDU.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.17.1.2 |
vRtrPimNgImportJoinPrunePolicy3vRtrPimNgImportJoinPrunePolicy3 is the third policy to
be used for determining how the PIM Join-Prune messages
are filtered. Join-Prune messages can be filtered based on
different criteria such as multicast group or source address
contained in the message, interface on which the messages are
received or the address of the neighbor who is sending the message.
If multiple policy names are specified, the policies are evaluated
in the order they are specified. The first policy that matches
is applied.
The import policy name list, vRtrPimNgImportJoinPrunePolicy1
through vRtrPimNgImportJoinPrunePolicy5, is handled by the SNMP
agent as a single entity. When an SNMP SET request is received
to modify one or more of the policy names, all the policy
variables are first set to the empty string, ''H, and then the
new names are set into the specified policy variables within a
single SNMP SET PDU.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.17.1.3 |
vRtrPimNgImportJoinPrunePolicy4vRtrPimNgImportJoinPrunePolicy4 is the fourth policy to
be used for determining how the PIM Join-Prune messages
are filtered. Join-Prune messages can be filtered based on
different criteria such as multicast group or source address
contained in the message, interface on which the messages are
received or the address of the neighbor who is sending the message.
If multiple policy names are specified, the policies are evaluated
in the order they are specified. The first policy that matches
is applied.
The import policy name list, vRtrPimNgImportJoinPrunePolicy1
through vRtrPimNgImportJoinPrunePolicy5, is handled by the SNMP
agent as a single entity. When an SNMP SET request is received
to modify one or more of the policy names, all the policy
variables are first set to the empty string, ''H, and then the
new names are set into the specified policy variables within a
single SNMP SET PDU.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.17.1.4 |
vRtrPimNgImportJoinPrunePolicy5vRtrPimNgImportJoinPrunePolicy5 is the fifth policy to
be used for determining how the PIM Join-Prune messages
are filtered. Join-Prune messages can be filtered based on
different criteria such as multicast group or source address
contained in the message, interface on which the messages are
received or the address of the neighbor who is sending the message.
If multiple policy names are specified, the policies are evaluated
in the order they are specified. The first policy that matches
is applied.
The import policy name list, vRtrPimNgImportJoinPrunePolicy1
through vRtrPimNgImportJoinPrunePolicy5, is handled by the SNMP
agent as a single entity. When an SNMP SET request is received
to modify one or more of the policy names, all the policy
variables are first set to the empty string, ''H, and then the
new names are set into the specified policy variables within a
single SNMP SET PDU.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.17.1.5 |
vRtrPimNgImportRegisterPolicy1vRtrPimNgImportRegisterPolicy1 is the the first policy to
be used for determining how the PIM Register messages
are filtered. Register policies are only relevant on the
Rendezvous Point(RP). Register messages can be filtered based on
different criteria such as multicast group or source
address contained in the inner multicast data packet or the
interface on which the Register Messages are received.
The import policy name list, vRtrPimNgImportRegisterPolicy1 through
vRtrPimNgImportRegisterPolicy5, is handled by the SNMP agent as a
single entity. When an SNMP SET request is received to modify one
or more of the policy names, all the policy variables are first
set to the empty string, ''H, and then the new names are set
into the specified policy variables within a single SNMP SET PDU.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.17.1.6 |
vRtrPimNgImportRegisterPolicy2vRtrPimNgImportRegisterPolicy2 is the the second policy to
be used for determining how the PIM Register messages
are filtered. Register policies are only relevant on the
Rendezvous Point(RP). Register messages can be filtered based on
different criteria such as multicast group or source
address contained in the inner multicast data packet or the
interface on which the Register Messages are received.
The import policy name list, vRtrPimNgImportRegisterPolicy1 through
vRtrPimNgImportRegisterPolicy5, is handled by the SNMP agent as a
single entity. When an SNMP SET request is received to modify one
or more of the policy names, all the policy variables are first
set to the empty string, ''H, and then the new names are set
into the specified policy variables within a single SNMP SET PDU.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.17.1.7 |
vRtrPimNgImportRegisterPolicy3vRtrPimNgImportRegisterPolicy3 is the the third policy to
be used for determining how the PIM Register messages
are filtered. Register policies are only relevant on the
Rendezvous Point(RP). Register messages can be filtered based on
different criteria such as multicast group or source
address contained in the inner multicast data packet or the
interface on which the Register Messages are received.
The import policy name list, vRtrPimNgImportRegisterPolicy1 through
vRtrPimNgImportRegisterPolicy5, is handled by the SNMP agent as a
single entity. When an SNMP SET request is received to modify one
or more of the policy names, all the policy variables are first
set to the empty string, ''H, and then the new names are set
into the specified policy variables within a single SNMP SET PDU.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.17.1.8 |
vRtrPimNgImportRegisterPolicy4vRtrPimNgImportRegisterPolicy4 is the the fourth policy to
be used for determining how the PIM Register messages
are filtered. Register policies are only relevant on the
Rendezvous Point(RP). Register messages can be filtered based on
different criteria such as multicast group or source
address contained in the inner multicast data packet or the
interface on which the Register Messages are received.
The import policy name list, vRtrPimNgImportRegisterPolicy1 through
vRtrPimNgImportRegisterPolicy5, is handled by the SNMP agent as a
single entity. When an SNMP SET request is received to modify one
or more of the policy names, all the policy variables are first
set to the empty string, ''H, and then the new names are set
into the specified policy variables within a single SNMP SET PDU.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.17.1.9 |
vRtrPimNgImportRegisterPolicy5The value of vRtrPimNgImportRegisterPolicy5 is the the fifth
policy to be used for determining how the PIM Register messages
are filtered. Register policies are only relevant on the
Rendezvous Point(RP). Register messages can be filtered based on
different criteria such as multicast group or source
address contained in the inner multicast data packet or the
interface on which the Register Messages are received.
The import policy name list, vRtrPimNgImportRegisterPolicy1 through
vRtrPimNgImportRegisterPolicy5, is handled by the SNMP agent as a
single entity. When an SNMP SET request is received to modify one
or more of the policy names, all the policy variables are first
set to the empty string, ''H, and then the new names are set
into the specified policy variables within a single SNMP SET PDU.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.17.1.10 |
vRtrPimNgImportBootstrapPolicy1vRtrPimNgImportBootstrapPolicy1 is the the first policy to
be used for determining how the PIM Bootstrap messages
are filtered. Bootstrap import policies are used to control
the flow of Bootstrap Messages to the router.
The import policy name list, vRtrPimNgImportBootstrapPolicy1
through vRtrPimNgImportBootstrapPolicy5, is handled by the SNMP
agent as a single entity. When an SNMP SET request is received
to modify one or more of the policy names, all the policy
variables are first set to the empty string, ''H, and then the
new names are set into the specified policy variables within
a single SNMP SET PDU.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.17.1.11 |
vRtrPimNgImportBootstrapPolicy2vRtrPimNgImportBootstrapPolicy2 is the the second policy to
be used for determining how the PIM Bootstrap messages
are filtered. Bootstrap import policies are used to control
the flow of Bootstrap Messages to the router.
The import policy name list, vRtrPimNgImportBootstrapPolicy1
through vRtrPimNgImportBootstrapPolicy5, is handled by the SNMP
agent as a single entity. When an SNMP SET request is received
to modify one or more of the policy names, all the policy
variables are first set to the empty string, ''H, and then the
new names are set into the specified policy variables within a
single SNMP SET PDU.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.17.1.12 |
vRtrPimNgImportBootstrapPolicy3vRtrPimNgImportBootstrapPolicy3 is the the third policy to
be used for determining how the PIM Bootstrap messages
are filtered. Bootstrap import policies are used to control
the flow of Bootstrap Messages to the router.
The import policy name list, vRtrPimNgImportBootstrapPolicy1
through vRtrPimNgImportBootstrapPolicy5, is handled by the SNMP
agent as a single entity. When an SNMP SET request is received
to modify one or more of the policy names, all the policy
variables are first set to the empty string, ''H, and then the
new names are set into the specified policy variables within a
single SNMP SET PDU.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.17.1.13 |
vRtrPimNgImportBootstrapPolicy4vRtrPimNgImportBootstrapPolicy4 is the the fourth policy to
be used for determining how the PIM Bootstrap messages
are filtered. Bootstrap import policies are used to control
the flow of Bootstrap Messages to the router.
The import policy name list, vRtrPimNgImportBootstrapPolicy1
through vRtrPimNgImportBootstrapPolicy5, is handled by the SNMP
agent as a single entity. When an SNMP SET request is received
to modify one or more of the policy names, all the policy
variables are first set to the empty string, ''H, and then the
new names are set into the specified policy variables within a
single SNMP SET PDU.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.17.1.14 |
vRtrPimNgImportBootstrapPolicy5The value of vRtrPimNgImportBootstrapPolicy5 is the the fifth
policy to be used for determining how the PIM Bootstrap messages
are filtered. Bootstrap import policies are used to control
the flow of Bootstrap Messages to the router.
The import policy name list, vRtrPimNgImportBootstrapPolicy1
through vRtrPimNgImportBootstrapPolicy5, is handled by the SNMP
agent as a single entity. When an SNMP SET request is received
to modify one or more of the policy names, all the policy
variables are first set to the empty string, ''H, and then the
new names are set into the specified policy variables within a
single SNMP SET PDU.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.17.1.15 |
vRtrPimNgExportBootstrapPolicy1vRtrPimNgExportBootstrapPolicy1 is the the first policy to
be used for determining how the PIM Bootstrap messages
are filtered. Bootstrap export policies are used to control
the flow of Bootstrap Messages from the router.
The export policy name list, vRtrPimNgExportBootstrapPolicy1
through vRtrPimNgExportBootstrapPolicy5, is handled by the SNMP
agent as a single entity. When an SNMP SET request is received
to modify one or more of the policy names, all the policy
variables are first set to the empty string, ''H, and then the
new names are set into the specified policy variables within a
single SNMP SET PDU.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.17.1.16 |
vRtrPimNgExportBootstrapPolicy2vRtrPimNgExportBootstrapPolicy2 is the the second policy to
be used for determining how the PIM Bootstrap messages
are filtered. Bootstrap export policies are used to control
the flow of Bootstrap Messages from the router.
The export policy name list, vRtrPimNgExportBootstrapPolicy1
through vRtrPimNgExportBootstrapPolicy5, is handled by the SNMP
agent as a single entity. When an SNMP SET request is received
to modify one or more of the policy names, all the policy
variables are first set to the empty string, ''H, and then the
new names are set into the specified policy variables within a
single SNMP SET PDU.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.17.1.17 |
vRtrPimNgExportBootstrapPolicy3vRtrPimNgExportBootstrapPolicy3 is the the third policy to
be used for determining how the PIM Bootstrap messages
are filtered. Bootstrap export policies are used to control
the flow of Bootstrap Messages from the router.
The export policy name list, vRtrPimNgExportBootstrapPolicy1
through vRtrPimNgExportBootstrapPolicy5, is handled by the SNMP
agent as a single entity. When an SNMP SET request is received
to modify one or more of the policy names, all the policy
variables are first set to the empty string, ''H, and then the
new names are set into the specified policy variables within a
single SNMP SET PDU.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.17.1.18 |
vRtrPimNgExportBootstrapPolicy4vRtrPimNgExportBootstrapPolicy4 is the the fourth policy to
be used for determining how the PIM Bootstrap messages
are filtered. Bootstrap export policies are used to control
the flow of Bootstrap Messages from the router.
The export policy name list, vRtrPimNgExportBootstrapPolicy1
through vRtrPimNgExportBootstrapPolicy5, is handled by the SNMP
agent as a single entity. When an SNMP SET request is received
to modify one or more of the policy names, all the policy
variables are first set to the empty string, ''H, and then the
new names are set into the specified policy variables within a
single SNMP SET PDU.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.17.1.19 |
vRtrPimNgExportBootstrapPolicy5The value of vRtrPimNgExportBootstrapPolicy5 is the the fifth
policy to be used for determining how the PIM Bootstrap messages
are filtered. Bootstrap export policies are used to control
the flow of Bootstrap Messages from the router.
The export policy name list, vRtrPimNgExportBootstrapPolicy1
through vRtrPimNgExportBootstrapPolicy5, is handled by the SNMP
agent as a single entity. When an SNMP SET request is received
to modify one or more of the policy names, all the policy
variables are first set to the empty string, ''H, and then the
new names are set into the specified policy variables within a
single SNMP SET PDU.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.17.1.20 |
vRtrPimNgSSMGroupTableLstChngdThe value of vRtrPimNgSSMGroupTableLstChngd indicates the sysUpTime
at the time of the last modification of an entry in the
vRtrPimNgSSMGroupTable.
If no changes were made to the table since the last re-initialization
of the local network management subsystem, then this object
contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.1.18 |
vRtrPimNgSSMGroupTablevRtrPimNgSSMGroupTable contains a range of group addresses
which are reserved for Source Specific Multicast(SSM).
The SSM standard designates IPv4 addresses in the
232/8 range and IPv6 addresses in FF3X:0000:/32 range
for SSM destination addresses. This table is used to configure
group addresses in addition to those defined in the SSM standard. SEQUENCE OF VRtrPimNgSSMGroupEntry .1.3.6.1.4.1.6527.3.1.2.50.1.19 |
vRtrPimNgSSMGroupEntryvRtrPimNgSSMGroupEntry defines a group range to be used for SSM. VRtrPimNgSSMGroupEntry .1.3.6.1.4.1.6527.3.1.2.50.1.19.1 |
vRtrPimNgSSMGroupAddressTypeThe value of vRtrPimNgSSMGroupAddressType indicates the type of
address specified by vRtrPimNgSSMGroupAddress. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.19.1.1 |
vRtrPimNgSSMGroupAddressThe value of vRtrPimNgSSMGroupAddress combined with the value of
vRtrPimNgSSMGroupMask indicates the range of multicast group addresses
to be used for Source Specific Multicast(SSM). InetAddress .1.3.6.1.4.1.6527.3.1.2.50.1.19.1.2 |
vRtrPimNgSSMGroupMaskThe value of vRtrPimNgSSMGroupMask indicates the mask which is
combined with vRtrPimNgSSMGroupAddress to get the range of multicast
group addresses to be used for Source Specific Multicast(SSM). InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.19.1.3 |
vRtrPimNgSSMGroupRowStatusThe value of vRtrPimNgSSMGroupRowStatus is used to create or delete
an entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.1.19.1.4 |
vRtrPimNgSSMGroupRowLastChangedThe value of vRtrPimNgSSMGroupRowLastChanged indicates
the sysUpTime when this row was last modified.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.1.19.1.5 |
vRtrPimNgAnycastRPTableLstChngdThe value of vRtrPimNgAnycastRPTableLstChngd indicates the sysUpTime
at the time of the last modification of an entry in the
vRtrPimNgAnycastRPTable.
If no changes were made to the table since the last re-initialization
of the local network management subsystem, then this object
contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.1.20 |
vRtrPimNgAnycastRPTablevRtrPimNgAnycastRPTable contains a list of configured
anycast Rendezvous Point (RP) addresses. SEQUENCE OF VRtrPimNgAnycastRPEntry .1.3.6.1.4.1.6527.3.1.2.50.1.21 |
vRtrPimNgAnycastRPEntryEach row entry in the vRtrPimNgAnycastRPTable represents
a configured anycast Rendezvous Point(RP). An entry in
this table can be created or destroyed by an SNMP SET
request to vRtrPimNgAnycastRPRowStatus. VRtrPimNgAnycastRPEntry .1.3.6.1.4.1.6527.3.1.2.50.1.21.1 |
vRtrPimNgAnycastRPAddressTypeThe value of vRtrPimNgAnycastRPAddressType indicates
the address type of vRtrPimNgAnycastRPAddress address. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.21.1.1 |
vRtrPimNgAnycastRPAddressThe value of vRtrPimNgAnycastRPAddress indicates the
Rendezvous Point (RP) anycast address that should be
used by the router for the range of multicast groups. InetAddress .1.3.6.1.4.1.6527.3.1.2.50.1.21.1.2 |
vRtrPimNgAnycastRPPeerAddrTypeThe value of vRtrPimNgAnycastRPPeerAddrType indicates
the address type of vRtrPimNgAnycastRPPeerAddress address. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.21.1.3 |
vRtrPimNgAnycastRPPeerAddressThe value of vRtrPimNgAnycastRPPeerAddress indicates the Peer's
Rendezvous Point (RP) anycast address that should be
used by the router for the range of multicast groups. InetAddress .1.3.6.1.4.1.6527.3.1.2.50.1.21.1.4 |
vRtrPimNgAnycastRPRowStatusThe value of vRtrPimNgAnycastRPRowStatus is used to
create or destroy entries in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.1.21.1.5 |
vRtrPimNgAnycastRPRowLstChangedThe value of vRtrPimNgAnycastRPRowLstChanged indicates
the sysUpTime when this row was last modified.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.1.21.1.6 |
vRtrPimNgSptSwOvrThdTabLstChngdThe value of vRtrPimNgSptSwOvrThdTabLstChngd indicates the sysUpTime
at the time of the last modification of an entry in the
vRtrPimNgSptSwitchoverThdTable.
If no changes were made to the table since the last re-initialization
of the local network management subsystem, then this object
contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.1.22 |
vRtrPimNgSptSwitchoverThdTablevRtrPimNgSptSwitchoverThdTable configures shortest path tree(spt tree)
switchover thresholds for group prefixes.
PIM-SM routers with directly connected routers receive multicast
traffic initially on a shared tree rooted at the Rendezvous Point (RP).
Once the traffic arrives on the shared tree and the source of the
traffic is known, a switchover to the spt tree rooted at the source is
attempted.
For a group that falls in the range of a prefix configured in the
table, the corresponding threshold value determines when the router
should switch over from the shared tree to the source specific
tree. The switchover is attempted only if the traffic rate on the
shared tree for the group exceeds the configured threshold.
In the absence of any matching prefix in the table, the default
behavior is to switchover when the first packet is seen. In the
presence of multiple prefixes matching a given group, the most
specific entry is used. SEQUENCE OF VRtrPimNgSptSwitchoverThdEntry .1.3.6.1.4.1.6527.3.1.2.50.1.23 |
vRtrPimNgSptSwitchoverThdEntryEach row entry in the vRtrPimNgSptSwitchoverThdEntry represents
a group prefix and the corresponding shortest path tree (spt tree)
switchover threshold it has to use.
An entry in this table can be created or destroyed by an SNMP SET
request to vRtrPimNgSptSwovrThdRowStatus. The SET request must
specify the group prefix as well as the threshold, or else the
entry will not be created. VRtrPimNgSptSwitchoverThdEntry .1.3.6.1.4.1.6527.3.1.2.50.1.23.1 |
vRtrPimNgSptSwOvrThdTblGpAdTypeThe value of vRtrPimNgSptSwOvrThdTblGpAdType indicates
the address type of vRtrPimNgSptSwOvrThdTblGrpAddr address. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.23.1.1 |
vRtrPimNgSptSwOvrThdTblGrpAddrThe value of vRtrPimNgSptSwOvrThdTblGrpAddr indicates the group
address for which the threshold can be configured. InetAddress .1.3.6.1.4.1.6527.3.1.2.50.1.23.1.2 |
vRtrPimNgSptSwOvrThdTblGpAdMaskThe value of vRtrPimNgSptSwOvrThdTblGpAdMask indicates the mask
for the group address vRtrPimNgSptSwOvrThdTblGrpAddr. InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.23.1.3 |
vRtrPimNgSptSwovrThdRowStatusThe value of vRtrPimNgSptSwovrThdRowStatus is used to create or
destroy entries in this table.
A row creation attempt will fail if vRtrPimNgSptSwitchoverThd is not
explicitly set to a value.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.1.23.1.4 |
vRtrPimNgSptSwovrThdRowLstChngdThe value of vRtrPimNgSptSwovrThdRowLstChngd indicates
the sysUpTime when this row was last modified.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.1.23.1.5 |
vRtrPimNgSptSwitchoverThdThe value of vRtrPimNgSptSwitchoverThd indicates the configured
threshold in kilo-bits per second(kbps) for a group prefix. A
switchover is attempted only if the traffic rate on the shared tree
for the group exceeds this configured threshold.
The value of 4294967295 indicates that there will be no switchover
from RPT to SPT and traffic will continue through RPT. This value
means 'infinity'.
When there is no row in this table, switchover from RPT to SPT is
done on the first packet.
A row creation attempt will fail if this object is not explicitly set
to a value.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.50.1.23.1.6 |
vRtrPimNgDataMtThdTableLstChngdThe value of vRtrPimNgDataMtThdTableLstChngd indicates the sysUpTime
at the time of the last modification of an entry in the
vRtrPimNgDataMtThdTable.
If no changes were made to the table since the last re-initialization
of the local network management subsystem, then this object
contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.1.24 |
vRtrPimNgDataMtThdTablevRtrPimNgDataMtThdTable configures Multicast Data Tunnel(Data MT)
thresholds for group prefixes.
Whenever the threshold of a C-(S,G)'s exceeds the configured threshold
value specified by vRtrPimNgDataMtThd in this table, a MT interface is
created in vRtrPimNgDataMtTable. If the data-threshold goes
below the value specified by vRtrPimNgDataMtThd, the MT
interface is automatically deleted. SEQUENCE OF VRtrPimNgDataMtThdEntry .1.3.6.1.4.1.6527.3.1.2.50.1.25 |
vRtrPimNgDataMtThdEntryEach row entry in the vRtrPimNgDataMtThdEntry represents
a group prefix and the corresponding Data MT threshold it has
to use.
An entry in this table can be created or destroyed by an SNMP SET
request to vRtrPimNgDataMtThdRowStatus. The SET request must
specify the group prefix as well as the threshold, or else the
entry will not be created. VRtrPimNgDataMtThdEntry .1.3.6.1.4.1.6527.3.1.2.50.1.25.1 |
vRtrPimNgDataMtThdTblGrpAdrTypeThe value of vRtrPimNgDataMtThdTblGrpAdrType indicates
the address type of vRtrPimNgDataMtThdTblGrpAddr address. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.25.1.1 |
vRtrPimNgDataMtThdTblGrpAddrThe value of vRtrPimNgDataMtThdTblGrpAddr indicates the group address
for which the threshold can be configured. InetAddress .1.3.6.1.4.1.6527.3.1.2.50.1.25.1.2 |
vRtrPimNgDataMtThdTblGrpAdrMaskThe value of vRtrPimNgDataMtThdTblGrpAdrMask indicates the mask
for the group address vRtrPimNgSptSwOvrThdTblGrpAddr. InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.25.1.3 |
vRtrPimNgDataMtThdRowStatusThe value of vRtrPimNgDataMtThdRowStatus is used to create or
destroy entries in this table.
A row creation attempt will fail if vRtrPimNgDataMtThd is not
explicitly set to a value.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.1.25.1.4 |
vRtrPimNgDataMtThdRowLstChngdThe value of vRtrPimNgDataMtThdRowLstChngd indicates
the sysUpTime when this row was last modified.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.1.25.1.5 |
vRtrPimNgDataMtThdThe value of vRtrPimNgDataMtThd indicates the configured threshold
in kilo bits per second(bps) for a group prefix. A MT interface is
created only if the traffic rate on the C-(S,G)'s for the group
exceeds this configured threshold.
A row creation attempt will fail if this object is not explicitly set
to a value.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.50.1.25.1.6 |
vRtrPimNgIfMcacLevelTblLstChngdThe value of vRtrPimNgIfMcacLevelTblLstChngd indicates the sysUpTime
at the time of the last modification of an entry in the
vRtrPimNgIfMcacLevelTable.
If no changes were made to the table since the last re-initialization
of the local network management subsystem, then this object
contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.1.26 |
vRtrPimNgIfMcacLevelTableThe vRtrPimNgIfMcacLevelTable has an entry for each multicast
CAC policy constraint level configured on this system. SEQUENCE OF VRtrPimNgIfMcacLevelEntry .1.3.6.1.4.1.6527.3.1.2.50.1.27 |
vRtrPimNgIfMcacLevelEntryEach row entry represents a particular multicast CAC
policy level constraints. Entries are created/deleted
by the user. VRtrPimNgIfMcacLevelEntry .1.3.6.1.4.1.6527.3.1.2.50.1.27.1 |
vRtrPimNgIfMcacLevelRowStatusThe value of vRtrPimNgIfMcacLevelRowStatus is used for
creation/deletion of level constraint in a CAC policy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.1.27.1.1 |
vRtrPimNgIfMcacLvlRowLstChngdThe value of vRtrPimNgIfMcacLvlRowLstChngd indicates
the sysUpTime when this row was last modified.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.1.27.1.2 |
vRtrPimNgIfMcacLevelBWThe value of vRtrPimNgIfMcacLevelBW specifies the bandwidth in
kilo-bits per second(kbps) for the level.rw Unsigned32 UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.50.1.27.1.3 |
vRtrPimNgIfMcacLagTableLstChngdThe value of vRtrPimNgIfMcacLagTableLstChngd indicates the sysUpTime
at the time of the last modification of an entry in the
vRtrPimNgIfMcacLagTable.
If no changes were made to the table since the last re-initialization
of the local network management subsystem, then this object
contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.1.28 |
vRtrPimNgIfMcacLagTableThe vRtrPimNgIfMcacLagTable has an entry for each lag
port configured for a multicast CAC policy
bundle on this system. SEQUENCE OF VRtrPimNgIfMcacLagEntry .1.3.6.1.4.1.6527.3.1.2.50.1.29 |
vRtrPimNgIfMcacLagEntryEach row entry represents a particular multicast CAC
lag port constraints. Entries are created/deleted by the user. VRtrPimNgIfMcacLagEntry .1.3.6.1.4.1.6527.3.1.2.50.1.29.1 |
vRtrPimNgIfMcacLagRowStatusThe value of vRtrPimNgIfMcacLagRowStatus is used for creation/deletion
of lag constraint in a CAC policy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.1.29.1.1 |
vRtrPimNgIfMcacLagRowLstChngdThe value of vRtrPimNgIfMcacLagRowLstChngd indicates
the sysUpTime when this row was last modified.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.1.29.1.2 |
vRtrPimNgIfMcacLagLevelThe value of vRtrPimNgIfMcacLagLevel specifies the level id to use
when the value of tmnxMcacLagPortsDown matches the actual number
of ports down in a lag.
Using the value of vRtrPimNgIfMcacLagLevel as an index, the
operational interface unconstrained bandwidth will be set to
vRtrPimNgIfMcacLevelBW.
By default for all lag constraints the interface level will be
set to 1 at row creation.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.50.1.29.1.3 |
vRtrPimNgERPGrpPrfxTblLstChngedThe value of vRtrPimNgERPGrpPrfxTblLstChnged indicates the sysUpTime
at the time of the last modification of an entry in the
vRtrPimNgERPGrpPrefixTable.
If no changes were made to the table since the last re-initialization
of the local network management subsystem, then this object
contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.1.30 |
vRtrPimNgERPGrpPrefixTablevRtrPimNgERPGrpPrefixTable lists the group ranges for embedded
RP address information. RP address information can only be embedded
in the IPv6 multicast group addresses.
Multicast groups in the default group range
(FF70::/12 to FFF0::/12) are always checked for embedded RP address
information. SEQUENCE OF VRtrPimNgERPGrpPrefixEntry .1.3.6.1.4.1.6527.3.1.2.50.1.31 |
vRtrPimNgERPGrpPrefixEntryAn entry in the vRtrPimNgERPGrpPrefixTable. Each entry represents
the group range for embedded RP address information. VRtrPimNgERPGrpPrefixEntry .1.3.6.1.4.1.6527.3.1.2.50.1.31.1 |
vRtrPimNgERPGrpPrfixGrpAddrTypeThe value of vRtrPimNgERPGrpPrfixGrpAddrType indicates the type of
address represented by vRtrPimNgERPGrpPrefixGrpAddr. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.31.1.1 |
vRtrPimNgERPGrpPrefixGrpAddrThe value of vRtrPimNgERPGrpPrefixGrpAddr combined with the value of
vRtrPimNgERPGrpPrefixGrpMask indicates the range of multicast group
addresses for which RP address information can be embedded. InetAddress .1.3.6.1.4.1.6527.3.1.2.50.1.31.1.2 |
vRtrPimNgERPGrpPrefixGrpMaskThe value of vRtrPimNgERPGrpPrefixGrpMask indicates the mask which
is combined with the value of vRtrPimNgERPGrpPrefixGrpAddr to get
the range of multicast group addresses for which RP address
information can be embedded. InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.31.1.3 |
vRtrPimNgERPGrpPrefixRowStatusThe value of vRtrPimNgERPGrpPrefixRowStatus is used to create or
destroy entries in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.1.31.1.4 |
vRtrPimNgRsvpIfTableThe table listing the interfaces on which PIM protocol
operation is enabled. SEQUENCE OF VRtrPimNgRsvpIfEntry .1.3.6.1.4.1.6527.3.1.2.50.1.32 |
vRtrPimNgRsvpIfEntryEach row entry in the vRtrPimNgRsvpIfTable represents a tunnel interface on
this router that participates in the PIM protocol. Entries can be created and
deleted via SNMP SET operations. VRtrPimNgRsvpIfEntry .1.3.6.1.4.1.6527.3.1.2.50.1.32.1 |
vRtrPimNgRsvpIfLspNameThe value of vRtrPimNgRsvpIfLspName indicates the name of the RSVP
point to multipoint (P2MP) lsp name associated with this tunnel interface. TNamedItem (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.32.1.1 |
vRtrPimNgRsvpIfSenderAddrTypeThe value of vRtrPimNgRsvpIfSenderAddrType indicates the type for
vRtrPimNgRsvpIfSenderAddr. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.32.1.2 |
vRtrPimNgRsvpIfSenderAddrThe value of vRtrPimNgRsvpIfSenderAddr indicates the sender address. InetAddress .1.3.6.1.4.1.6527.3.1.2.50.1.32.1.3 |
vRtrPimNgRsvpIfRowStatusThe value of vRtrPimNgRsvpIfRowStatus is used to create or delete
an entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.1.32.1.4 |
vRtrPimNgRsvpIfOperStateThe value of vRtrPimNgRsvpIfOperState indicates the current
operational state of PIM protocol on this interface.ro TmnxOperState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.32.1.5 |
vRtrPimNgRsvpIfIndexThe unique value of vRtrPimNgRsvpIfIndex identifies this tunnel
interface for this virtual router in the Alcatel-Lucent SROS system.
It is a unique value among entries with the same value of vRtrID.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.32.1.6 |
vRtrPimNgCRPGpPfxInetTblLstChngdThe value of vRtrPimNgCRPGpPfxInetTblLstChngd indicates the sysUpTime
at the time of the last modification of an entry in the
vRtrPimNgCRPGrpPrefixInetTable.
If no changes were made to the table since the last re-initialization
of the local network management subsystem, then this object
contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.1.33 |
vRtrPimNgCRPGrpPrefixInetTablevRtrPimNgCRPGrpPrefixInetTable lists the group prefixes for which
the router sends the Candidate RP Advertizement. SEQUENCE OF VRtrPimNgCRPGrpPrefixInetEntry .1.3.6.1.4.1.6527.3.1.2.50.1.34 |
vRtrPimNgCRPGrpPrefixInetEntryAn entry in the vRtrPimNgCRPGrpPrefixInetTable. Each entry represents
the group prefix for which the router sends the Candidate RP
Advertizement(CRP-Adv). CRP-Adv messages are sent to the Elected
BSR router(E-BSR). VRtrPimNgCRPGrpPrefixInetEntry .1.3.6.1.4.1.6527.3.1.2.50.1.34.1 |
vRtrPimNgCRPGrpPfxInetGrpAdrTypeThe value of vRtrPimNgCRPGrpPfxInetGrpAdrType indicates the type of
address represented by vRtrPimNgCRPGrpPrefixInetGrpAddr.The value
'unknown (0)' is not valid for this index object. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.34.1.1 |
vRtrPimNgCRPGrpPrefixInetGrpAddrThe value of vRtrPimNgCRPGrpPrefixInetGrpAddr combined with the value
of vRtrPimNgCRPGrpPrefixInetGrpMask indicates the range of multicast
group addresses for which the router advertizes to be the
Candidate RP. The value of vRtrPimNgAFGenCRPAddress is sent as the
RP address. InetAddress .1.3.6.1.4.1.6527.3.1.2.50.1.34.1.2 |
vRtrPimNgCRPGrpPrefixInetGrpMaskThe value of vRtrPimNgCRPGrpPrefixInetGrpMask indicates the mask
which is combined with the value of vRtrPimNgCRPGrpPrefixInetGrpAddr
to get the range of multicast group addresses for which the router
advertizes to be the Candidate RP. The value of
vRtrPimNgAFGenCRPAddress is sent as the RP address. InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.34.1.3 |
vRtrPimNgCRPGrpPrfxInetRowStatusThe value of vRtrPimNgCRPGrpPrfxInetRowStatus specifies the row
status of the group prefix entry for the Candidate RP Advertizement.
Row status is used for creation and deletion of
vRtrPimNgCRPGrpPrefixInetTable entries.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.1.34.1.4 |
vRtrPimNgCRPGrpPfxInetRowLstChgdThe value of vRtrPimNgCRPGrpPfxInetRowLstChgd indicates
the sysUpTime when this row was last modified.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.1.34.1.5 |
vRtrPimNgCRPInetTablevRtrPimNgCRPInetTable lists the C-RP's and the group prefixes sent
in the C-RP advertisement. vRtrPimNgCRPInetTable will be empty on all
routers except the elected BSR router. SEQUENCE OF VRtrPimNgCRPInetEntry .1.3.6.1.4.1.6527.3.1.2.50.1.35 |
vRtrPimNgCRPInetEntryAn entry in the vRtrPimNgCRPInetTable. It is created when the
Elected BSR receives a Candidate-RP Advertizement from the C-RP's. VRtrPimNgCRPInetEntry .1.3.6.1.4.1.6527.3.1.2.50.1.35.1 |
vRtrPimNgCRPInetAddressTypeThe value of vRtrPimNgCRPInetAddressType indicates the type of
address of the Candidate RP. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.35.1.1 |
vRtrPimNgCRPInetAddressThe value of vRtrPimNgCRPInetAddress indicates the Candidate
RP address. InetAddress .1.3.6.1.4.1.6527.3.1.2.50.1.35.1.2 |
vRtrPimNgCRPInetGrpAddrTypeThe value of vRtrPimNgCRPInetGrpAddrType indicates the type of the
address represented by vRtrPimNgCRPInetGrpAddr. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.35.1.3 |
vRtrPimNgCRPInetGrpAddrThe value of vRtrPimNgCRPInetGrpAddr combined with the value of
vRtrPimNgCRPInetGrpMask indicates the range of multicast group
addresses for which vRtrPimNgCRPInetAddress is the Candidate RP. InetAddress .1.3.6.1.4.1.6527.3.1.2.50.1.35.1.4 |
vRtrPimNgCRPInetGrpMaskThe value of vRtrPimNgCRPInetGrpMask indicates the mask which is
combined with vRtrPimNgCRPInetGrpAddr to get the range of multicast
group addresses for which vRtrPimNgCRPInetAddress is the
Candidate RP. InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.35.1.5 |
vRtrPimNgCRPInetHoldtimeThe value of vRtrPimNgCRPInetHoldtime indicates the hold time of the
candidate RP. It is used by the bootstrap router to timeout the
RP entries if it does not listen to another C-RP advertisement
within the holdtime period.ro Integer32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.50.1.35.1.6 |
vRtrPimNgCRPInetPriorityThe value of vRtrPimNgCRPInetPriority indicates the Candidate RP's
priority for becoming a rendezvous point (RP). This value is
used to elect RP for a group range. A value of 0 is considered
as the highest priority.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.50.1.35.1.7 |
vRtrPimNgCRPInetExpiryTimeThe value of vRtrPimNgCRPInetExpiryTime indicates the minimum time
remaining before the Candidate-RP will be declared down.
If the local router is not the BSR, this value is 0.ro Integer32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.50.1.35.1.8 |
vRtrPimNgRPSetInetTableThis table lists the RP Set sent by the Elected BSR in the
Bootstrap Messages(BSM) or the RP Set sent by the Mapping Agent in
case of Auto-RP. It also contains the static entries in
vRtrPimNgStGrptoRPTable. The router uses this table to calculate the
group-to-RP mappings. SEQUENCE OF VRtrPimNgRPSetInetEntry .1.3.6.1.4.1.6527.3.1.2.50.1.36 |
vRtrPimNgRPSetInetEntryAn entry in the vRtrPimNgRPSetInetTable. It is created by the elected
BSR when it receives the Candidate-RP-Adv messages. Other routers
create this entry on receiving Bootstrap Message(BSM) sent by the
elected BSR router. It can also be created when a router receives a
Mapping message from the Auto-RP Mapping Agent. VRtrPimNgRPSetInetEntry .1.3.6.1.4.1.6527.3.1.2.50.1.36.1 |
vRtrPimNgRPSetInetTypevRtrPimNgRPSetInetType is an index into this table. It indicates
whether the entry was learned through the bootstrap mechanism, the
Auto-RP mechanism or if it was statically configured using the
vRtrPimNgStGrptoRPTable. Enumeration .1.3.6.1.4.1.6527.3.1.2.50.1.36.1.1 |
vRtrPimNgRPSetInetGrpAddrTypeThe value of vRtrPimNgRPSetInetGrpAddrType indicates the type of
address represented by vRtrPimNgRPSetInetGrpAddr. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.36.1.2 |
vRtrPimNgRPSetInetGrpAddrThe value of vRtrPimNgRPSetInetGrpAddr, combined with the value of
vRtrPimNgRPSetInetGrpMask, indicates the range of multicast group
addresses for which vRtrPimNgRPSetInetCRPAddress is the Candidate RP. InetAddress .1.3.6.1.4.1.6527.3.1.2.50.1.36.1.3 |
vRtrPimNgRPSetInetGrpMaskThe value of vRtrPimNgRPSetInetGrpMask indicates the mask which is
combined with vRtrPimNgRPSetInetGrpAddr to get the range of multicast
group addresses for which vRtrPimNgRPSetInetCRPAddress is the
candidate RP. InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.36.1.4 |
vRtrPimNgRPSetInetCRPAddrTypeThe value of vRtrPimNgRPSetInetCRPAddrType indicates the type of
address of the Candidate RP address. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.36.1.5 |
vRtrPimNgRPSetInetCRPAddressThe value of vRtrPimNgRPSetInetCRPAddress indicates the
Candidate RP address. InetAddress .1.3.6.1.4.1.6527.3.1.2.50.1.36.1.6 |
vRtrPimNgRPSetInetHoldtimeThe value of vRtrPimNgRPSetInetHoldtime indicates the hold time of
the candidate RP. It is used by the bootstrap router to timeout the
RP entries if it does not listen to another C-RP advertisement
within the holdtime period. The value of vRtrPimNgRPSetInetHoldtime
will be zero for static entries.ro Integer32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.50.1.36.1.7 |
vRtrPimNgRPSetInetPriorityThe value of vRtrPimNgRPSetInetPriority indicates the Candidate RP's
priority for becoming a rendezvous point (RP). This value is used
to elect RP for a group range. A value of 0 is considered as the
highest priority. For static entries, the priority is always 1.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.50.1.36.1.8 |
vRtrPimNgRPSetInetExpiryTimeThe value of vRtrPimNgRPSetInetExpiryTime indicates the minimum time
remaining before the RP Set group prefix will be declared down.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.50.1.36.1.9 |
vRtrPimNgGrpSrcHostTableThis table lists the PIM enabled hosts for an entry in
vRtrPimNgGrpSrcTable. SEQUENCE OF VRtrPimNgGrpSrcHostEntry .1.3.6.1.4.1.6527.3.1.2.50.1.37 |
vRtrPimNgGrpSrcHostEntryAn entry in the vRtrPimNgGrpSrcHostTable.
Each entry represents the state of the PIM enabled host for
every vRtrPimNgGrpSrcEntry. VRtrPimNgGrpSrcHostEntry .1.3.6.1.4.1.6527.3.1.2.50.1.37.1 |
vRtrPimNgGrpSrcHostAddrTypeThe value of vRtrPimNgGrpSrcHostAddrType indicates the type of
IP multicast host address represented by
vRtrPimNgGrpSrcHostAddress. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.37.1.1 |
vRtrPimNgGrpSrcHostAddressThe value of vRtrPimNgGrpSrcHostAddress indicates the IP multicast
host address for which this entry contains information. If the
vRtrPimNgGrpSrcType is 'starStarRP', the value of this object will
be zero and vRtrPimNgGrpSrcHostAddress will contain the address
of the RP. InetAddress .1.3.6.1.4.1.6527.3.1.2.50.1.37.1.2 |
vRtrPimNgGrpSrcHostFlagsThe value of vRtrPimNgGrpSrcHostFlags indicates the different lists
that this host belongs to.ro Bits .1.3.6.1.4.1.6527.3.1.2.50.1.37.1.3 |
vRtrPimNgGrpSrcGrpIfTableThis table lists the PIM enabled group-interfaces for an entry in
vRtrPimNgGrpSrcTable. SEQUENCE OF VRtrPimNgGrpSrcGrpIfEntry .1.3.6.1.4.1.6527.3.1.2.50.1.38 |
vRtrPimNgGrpSrcGrpIfEntryAn entry in the vRtrPimNgGrpSrcGrpIfTable.
Each entry represents the state of the PIM enabled group-interfaces for
every vRtrPimNgGrpSrcEntry. VRtrPimNgGrpSrcGrpIfEntry .1.3.6.1.4.1.6527.3.1.2.50.1.38.1 |
vRtrPimNgGrpSrcGrpIfFwdSvcIdThe value of vRtrPimNgGrpSrcGrpIfFwdSvcId specifies the forwarding
service ID for a group-interface in a retailer
context. TmnxServId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.38.1.1 |
vRtrPimNgGrpSrcGrpIfIndexThe unique value which identifies this group-interface of this virtual
router in the Tmnx system. This field provides an identifier for
virtual router interfaces similar to the ifIndex values used in the
mib-2 interfaces table for physical interfaces.
The vRtrPimNgGrpSrcGrpIfIndex values
can be reused for different virtual routers, but are unique within
those entries with the same vRtrID.
The vRtrPimNgGrpSrcGrpIfIndex value for each virtual interface must
remain constant at least from one re-initialization of the system
management processor to the next. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.38.1.2 |
vRtrPimNgGrpSrcGrpIfFlagsThe value of vRtrPimNgGrpSrcGrpIfFlags indicates the different lists
that this group-interface belongs to.ro Bits .1.3.6.1.4.1.6527.3.1.2.50.1.38.1.3 |
vRtrPimNgMvpnUMHPETblLastChgThe value of the object vRtrPimNgMvpnUMHPETblLastChg indicates
the time of the last change to any row of vRtrPimNgMvpnUMHPETable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.1.39 |
vRtrPimNgMvpnUMHPETableThis table represents the mapping between primary and standby peers to
support MVPN source redundancy. SEQUENCE OF VRtrPimNgMvpnUMHPEEntry .1.3.6.1.4.1.6527.3.1.2.50.1.40 |
vRtrPimNgMvpnUMHPEEntryAn entry in the vRtrPimNgMvpnUMHPETable. Each row represents the
standby peer address configured for a primary peer in MVPN. VRtrPimNgMvpnUMHPEEntry .1.3.6.1.4.1.6527.3.1.2.50.1.40.1 |
vRtrPimNgMvpnUMHPEAddrTypeThe value of vRtrPimNgMvpnUMHPEAddrType indicates the type of
the address assigned to a primary PE indicated by
vRtrPimNgMvpnUMHPEAddr. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.40.1.1 |
vRtrPimNgMvpnUMHPEAddrThe value of vRtrPimNgMvpnUMHPEAddr indicates the value of the address
assigned to the primary PE to be used in UMH selection for MVPN source
redundancy. InetAddress .1.3.6.1.4.1.6527.3.1.2.50.1.40.1.2 |
vRtrPimNgMvpnUMHPERowStatusThe value of vRtrPimNgMvpnUMHPERowStatus specifies the Row status of
this table row. This object is used to create or delete rows in this
table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.1.40.1.3 |
vRtrPimNgMvpnUMHPELastChangedThe value of vRtrPimNgMvpnUMHPELastChanged indicates the timestamp of
the last change to this row in vRtrPimNgMvpnUMHPETable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.1.40.1.4 |
vRtrPimNgMvpnUMHPEStandbyAdrTypThe value of vRtrPimNgMvpnUMHPEStandbyAdrTyp specifies the type of
the address assigned to the standby PE indicated by
vRtrPimNgMvpnUMHPEStandbyAddr. This object MUST be specified at row
creation time.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.1.40.1.5 |
vRtrPimNgMvpnUMHPEStandbyAddrThe value of vRtrPimNgMvpnUMHPEStandbyAddr specifies the
value of the address assigned to a standby PE to be used in UMH
selection for MVPN source redundancy. This value cannot be modified
without shutting down the MVPN instance.
An address instance of 'vRtrPimNgMvpnUMHPEStandbyAddr' can be
associated with only a single address instance of
'vRtrPimNgMvpnUMHPEAddr' or in other words the pairing must be
unique.
This object MUST be specified at row creation time.rw InetAddress .1.3.6.1.4.1.6527.3.1.2.50.1.40.1.6 |
vRtrPimNgIfObjs OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.50.2 |
vRtrPimNgIfTableLastChangedThe value of vRtrPimNgIfTableLastChanged indicates the sysUpTime
at the time of the last modification of an entry in the
vRtrPimNgIfTable.
If no changes were made to the table since the last re-initialization
of the local network management subsystem, then this object
contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.2.1 |
vRtrPimNgIfTableThe table listing the interfaces on which PIM protocol
operation is enabled. SEQUENCE OF VRtrPimNgIfEntry .1.3.6.1.4.1.6527.3.1.2.50.2.2 |
vRtrPimNgIfEntryEach row entry in the vRtrPimNgIfTable represents an interface on
this router that participates in the PIM protocol. An entry in
this table can be created or destroyed by an SNMP SET request to
vRtrPimNgIfRowStatus. VRtrPimNgIfEntry .1.3.6.1.4.1.6527.3.1.2.50.2.2.1 |
vRtrPimNgIfRowStatusThe value of vRtrPimNgIfRowStatus is used to create or delete
an entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.2.2.1.1 |
vRtrPimNgIfLastChangeTimeThe value of vRtrPimNgIfLastChangeTime indicates the sysUpTime
when this row was last modified.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.2.2.1.2 |
vRtrPimNgIfAdminStateThe value of vRtrPimNgIfAdminState specifies the desired
administrative state for PIM protocol on this interface.rw TmnxAdminState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.50.2.2.1.3 |
vRtrPimNgIfOperStateThe value of vRtrPimNgIfOperState indicates the current
operational state of PIM protocol on this interface.ro TmnxOperState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.50.2.2.1.4 |
vRtrPimNgIfHelloIntervalThe value of vRtrPimNgIfHelloInterval specifies the frequency at which
PIM Hello messages are transmitted on this interface.rw Integer32 .1.3.6.1.4.1.6527.3.1.2.50.2.2.1.5 |
vRtrPimNgIfTrackingSupportIf the value of vRtrPimNgIfTrackingSupport is set to 'true', the T bit
in the LAN Prune Delay option of the Hello Message is set.
This indicates the router's capability to disable
Join message suppression.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.2.2.1.6 |
vRtrPimNgIfMulticastSendersThe value of vRtrPimNgIfMulticastSenders specifies the way subnet
matching is done for the data packets coming on this interface
from the multicast senders.
For all interfaces, the default value is 'auto'. It indicates that
the subnet match will happen for packets coming in on this
interface. If the subnet does not match, the packet will be
dropped.
If the interface is unnumbered or the host is on a different subnet
than that of the interface, vRtrPimNgIfMulticastSenders should be set
to 'always'. It means that packets will not go through the regular
subnet check and not be dropped on a subnet match.
If PIM Hello messages are received on an interface with
vRtrPimNgIfMulticastSenders set to 'always', they are dropped and
a vRtrPimNgHelloDropped notification is generated.
For broadcast interfaces, if it is required that there be no
multicast senders, vRtrPimNgIfMulticastSenders should be set to
'never'.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.50.2.2.1.7 |
vRtrPimNgIfAutoCreatedThe value of vRtrPimNgIfAutoCreated indicates if this interface
was auto created using vRtrPimNgGenCreateInterfaces object.
If the value of this object is 'true', this interface was auto
created. If the value of this object is 'false', this interface
was either not created automatically or the default values of
the auto created interface were changed.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.2.2.1.8 |
vRtrPimNgIfBSMCheckRouterAlertThe value of vRtrPimNgIfBSMCheckRouterAlert specifies whether to
enable or disable checking of router alert option in the bootstrap
messages received on this interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.2.2.1.9 |
vRtrPimNgIfHelloMultiplierThe value of vRtrPimNgIfHelloMultiplier specifies the multiplier for
determining the holdtime for a PIM neighbor on this interface.
The hello-multiplier in conjunction with the hello-interval
will determine the holdtime for a PIM neighbor.
The formula used to calculate the hello-holdtime based
on the hello-multiplier is -
(hello-interval * hello-multiplier) / 10
The hello-multiplier is specified in multiples of 0.1.
This allows the PIMv2 default timeout of 3.5 seconds to be
supported.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.50.2.2.1.10 |
vRtrPimNgIfImprovedAssertThe value of vRtrPimNgIfImprovedAssert specifies whether to
enable or disable improved assert processing on this interface.
The PIM Assert process establishes a forwarder for a LAN and
requires interaction between the control and forwarding planes.
The Assert process is started when data is received on an
outgoing interface. This could impact performance if data
is continuously received on an outgoing interface.
If this flag is set to 'true', the PIM assert process is done
entirely on the control-plane with no interaction between the
control and forwarding plane.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.2.2.1.11 |
vRtrPimNgIfStickyDRThe value of vRtrPimNgIfStickyDR specifies whether to enable or
disable sticky-dr operation on this interface.
If sticky-dr is turned on, the priority in PIM hellos sent on this
interface when elected as DR will be modified to the value
configured in vRtrPimNgIfStickyDRPriority. This is done to avoid the
delays in forwarding caused by DR recovery, when switching back
to the old DR on a LAN when it comes back up.
By enabling sticky-dr on this interface, it will continue to act
as the DR for the LAN even after the old DR comes back up.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.2.2.1.12 |
vRtrPimNgIfStickyDRPriorityThe value of vRtrPimNgIfStickyDRPriority specifies the
DR priority to be sent in PIM Hello messages following
the election of that interface as the DR, when sticky-dr
operation is enabled.
If sticky-dr is turned off, normal PIM behavior is followed and
vRtrPimNgIfStickyDRPriority is not applicable.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.50.2.2.1.13 |
vRtrPimNgIfMaxGroupsThe value of vRtrPimNgIfMaxGroups specifies the maximum number of
groups for which PIM can have downstream state based on received PIM
Joins on this interface.
This does not include IGMP local receivers on the interface.
When this configuration is changed dynamically to a value lower
than the currently accepted number of groups, the groups that
are already accepted are not deleted. Only new groups will not be
allowed. When this object has a value of 0, there is no limit to the
number of groups.rw Unsigned32 (0|1..1024) .1.3.6.1.4.1.6527.3.1.2.50.2.2.1.14 |
vRtrPimNgIfEnableBfdThe value of vRtrPimNgIfEnableBfd specifies whether Bi-directional
Forwarding Detection is enabled for Ipv4 on this PIM interface.
When the value is 'true', this PIM interface can establish BFD
sessions and use BFD as a signalling mechanism. When it is 'false',
it cannot use BFD for Ipv4.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.2.2.1.15 |
vRtrPimNgIfThreeWayHellovRtrPimNgIfThreeWayHello specifies whether to enable or disable
the three way hello.
For all interfaces, the default value is 'disabled'. It specifies that
the standard two way hello is supported. When the value is set to
'enabled' it specifies that the three way hello is supported. However
this will not be compatible with releases 3.0R10, 3.0R11, 4.0R2 and
4.0R3.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.50.2.2.1.16 |
vRtrPimNgIfMcacPolicyNameThe value of vRtrPimNgIfMcacPolicyName specifies the name
of the multicast CAC policy.
The multicast cac policy applies the interface cac algorithm if
the channel(group) on this interface is part of the policy as
specified in vRtrPimNgIfMcacPolicyName.rw TPolicyStatementNameOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.50.2.2.1.17 |
vRtrPimNgIfMcacUnconstrainedBWThe value of vRtrPimNgIfMcacUnconstrainedBW specifies the bandwidth
assigned for interface's multicast cac policy traffic in kilo-bits
per second(kbps).
If the default value of '-1' is set, there is no constraint on
bandwidth allocated at the interface.
If the value of vRtrPimNgIfMcacUnconstrainedBW is set to '0' and if
a multicast cac policy is assigned on the interface, then
no group (channel) from that policy is allowed on that interface.rw Integer32 (-1|0..2147483647) UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.50.2.2.1.18 |
vRtrPimNgIfMcacConstAdminStateThe value of vRtrPimNgIfMcacConstAdminState specifies the
administrative state of the multicast CAC policy's constraints.rw TmnxAdminState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.50.2.2.1.19 |
vRtrPimNgIfMcacPreRsvdMandBWThe value of vRtrPimNgIfMcacPreRsvdMandBW specifies the bandwidth
pre-reserved for all the mandatory channels on a given interface
in kilo-bits per second(kbps).
If the value of vRtrPimNgIfMcacUnconstrainedBW is '0', no mandatory
channels are allowed. If the value of vRtrPimNgIfMcacUnconstrainedBW
is '-1', then all mandatory and optional channels are allowed.
If the value of vRtrPimNgIfMcacPreRsvdMandBW is equal to the value of
vRtrPimNgIfMcacUnconstrainedBW, then all the unconstrained bandwidth
on a given interface is allocated to mandatory channels configured
through multicast cac policy on that interface and no optional
groups (channels) are allowed.
The value of vRtrPimNgIfMcacPreRsvdMandBW should always be less than
or equal to that of vRtrPimNgIfMcacUnconstrainedBW. An attempt to set
the value of vRtrPimNgIfMcacPreRsvdMandBW greater than that of
vRtrPimNgIfMcacUnconstrainedBW will result in inconsistent value
error.rw Integer32 (-1|0..2147483647) UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.50.2.2.1.20 |
vRtrPimNgIfMcacinUseMandBwThe value of vRtrPimNgIfMcacinUseMandBw indicates the
in-use bandwidth in kilo-bits per second(kbps) for the
mandatory channels for this protocol interface instance.ro Unsigned32 UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.50.2.2.1.21 |
vRtrPimNgIfMcacinUseOpnlBwThe value of vRtrPimNgIfMcacinUseOpnlBw indicates the
in-use bandwidth in kilo-bits per second(kbps) for the
optional channels for this protocol interface instance.ro Unsigned32 UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.50.2.2.1.22 |
vRtrPimNgIfMcacAvailMandBwThe value of vRtrPimNgIfMcacAvailMandBw indicates the
pre-reserved bandwidth in kilo-bits per second(kbps)
for the mandatory channels for this interface instance.ro Unsigned32 UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.50.2.2.1.23 |
vRtrPimNgIfMcacAvailOpnlBwThe value of vRtrPimNgIfMcacAvailOpnlBw indicates the
available bandwidth in kilo-bits per second(kbps) for this
interface instance.ro Unsigned32 UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.50.2.2.1.24 |
vRtrPimNgIfMcacValuesInTransitThe value of vRtrPimNgIfMcacValuesInTransit indicates that the
operational (available and in-use mandatory or optional) value for the
following objects are in transition due to configuration change:
vRtrPimNgIfMcacAvailMandBw
vRtrPimNgIfMcacAvailOpnlBw
vRtrPimNgIfMcacinUseMandBw
vRtrPimNgIfMcacinUseOpnlBw
When Multicast CAC Policy is applied on the interface for the join
of the next channel, the operational values will be recalculated and
applied to the above objects and the value for
vRtrPimNgIfMcacValuesInTransit will be set to 'false'.
If the value of vRtrPimNgIfMcacValuesInTransit is 'true' then the
values are in transition.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.2.2.1.25 |
vRtrPimNgIfDRPriorityThe value of vRtrPimNgIfDRPriority specifies the value sent in PIM
Hello messages and used by routers to elect the Designated Router(DR).
The DR election priority is a 32-bit unsigned number and the
numerically larger priority is always preferred.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.50.2.2.1.26 |
vRtrPimNgIfAssertPeriodThe value of vRtrPimNgIfAssertPeriod specifies the period in seconds
for periodic refreshes of PIM Assert messages on an interface.rw Integer32 .1.3.6.1.4.1.6527.3.1.2.50.2.2.1.27 |
vRtrPimNgIfInstantPruneEchoThe value of vRtrPimNgIfInstantPruneEcho specifies whether PIM
will send an instant Prune Echo when the upstream router enters
Prune-Pending state on this interface. A Prune Echo is simply a Prune
message sent by the upstream router with its own address in the
Upstream Neighbor Address field. Due to this, all downstream routers
will see the Prune message and they can send a join override if
interested in the group.
This is not only useful on NMBA networks, but also can be used on a LAN
enviornment to improve reliability.rw TmnxEnabledDisabled (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.50.2.2.1.28 |
vRtrPimNgIfIpv6EnableBfdThe value of vRtrPimNgIfIpv6EnableBfd specifies whether Bi-directional
Forwarding Detection is enabled for Ipv6 on this PIM interface.
When the value is 'true', this PIM interface can establish BFD
sessions and use BFD as a signaling mechanism. When it is 'false',
it cannot use BFD for Ipv6.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.2.2.1.29 |
vRtrPimNgIfP2mpLdpTreeJoinThe value of vRtrPimNgIfP2mpLdpTreeJoin specifies whether to join a
P2MP LDP tree towards a multicast source.
When the value is 'true', a multicast join received on an interface is
processed to join a PIM multicast tree and also copied over to LDP to
join the in-band signaled P2MP tree for the same multicast flow. LDP
P2MP tree is setup either to RP (ASM group) or source (SSM group). The
route to the RP or the source of the multicast node is looked up from
the RTM. The next-hop address for the route to RP or source is set as
the root of LDP P2MP tree. When it is 'false', the P2MP LDP tree is
disjoined from the multicast source.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.2.2.1.30 |
vRtrPimNgIfExtranetTypeThe value of vRtrPimNgIfExtranetType indicates whether the extranet
interface is of type transmitter or reciever.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.50.2.2.1.31 |
vRtrPimNgIfExtranetMvpnIdThe value of vRtrPimNgIfExtranetMvpnId indicates the id associated
with the extranet interface. If the interface is not an extranet
interface then the value of this object will be '0'.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.50.2.2.1.32 |
vRtrPimNgAFIfTableThe table listing the interfaces on which PIM protocol
operation is enabled. SEQUENCE OF VRtrPimNgAFIfEntry .1.3.6.1.4.1.6527.3.1.2.50.2.3 |
vRtrPimNgAFIfEntryEach row entry in the vRtrPimNgAFIfTable represents an interface on
this router that participates in the PIM protocol. VRtrPimNgAFIfEntry .1.3.6.1.4.1.6527.3.1.2.50.2.3.1 |
vRtrPimNgAFIfAFTypeThe value of vRtrPimNgAFIfAFType indicates the address family
type supported by the PIM on this interface. TmnxMulticastAddrFamily (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.50.2.3.1.1 |
vRtrPimNgAFIfAdminStateThe value of vRtrPimNgAFIfAdminState specifies the desired
administrative state associated with this address family
for PIM protocol on this interface.rw TmnxAdminState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.50.2.3.1.2 |
vRtrPimNgAFIfOperStateThe value of vRtrPimNgAFIfOperState indicates the current
operational state associated with this address family for
PIM protocol on this interface.ro TmnxOperState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.50.2.3.1.3 |
vRtrPimNgAFIfMdtDefGrpAddrTypeThe value of vRtrPimNgAFIfMdtDefGrpAddrType indicates the type of
address represented by vRtrPimNgAFIfMdtDefGrpAddress.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.2.3.1.4 |
vRtrPimNgAFIfMdtDefGrpAddressThe value of vRtrPimNgAFIfMdtDefGrpAddress indicates the default
group address used for Multicast Distribution Tree (MDT). It is
applicable only when this entry corresponds to a Multicast Tunnel(MT)
interface for a particular VPRN.ro InetAddress .1.3.6.1.4.1.6527.3.1.2.50.2.3.1.5 |
vRtrPimNgAFIfNextHelloTimeThe value of vRtrPimNgAFIfNextHelloTime indicates the time in
which the next PIM Hello message will be transmitted on this
interface.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.50.2.3.1.6 |
vRtrPimNgAFIfOperDRPriorityThe value of vRtrPimNgAFIfOperDRPriority indicates the priority
of the current DR on a LAN. This value is different from the
configured PIM DR priority and is the result of the PIM DR
election process.
The value of vRtrPimNgAFIfOperDRPriority will be 0 if the interface
is operationally down and DR election has not taken place.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.50.2.3.1.7 |
vRtrPimNgAFIfCurrentGroupsThe value of vRtrPimNgAFIfCurrentGroups indicates the number of groups
that currently have this interface as an outgoing interface.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.50.2.3.1.8 |
vRtrPimNgAFIfMaxGroupsTillNowThe value of vRtrPimNgAFIfMaxGroupsTillNow indicates the highest value
that vRtrPimNgAFIfCurrentGroups had till now.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.3.1.9 |
vRtrPimNgAFIfDRTypeThe value of vRtrPimNgAFIfDRType indicates the type of the address of
the designated Router on this PIM interface.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.2.3.1.10 |
vRtrPimNgAFIfDRThe value of vRtrPimNgAFIfDR indicates the Designated Router on this
PIM interface.ro InetAddress .1.3.6.1.4.1.6527.3.1.2.50.2.3.1.11 |
vRtrPimNgAFIfTrackSprtOperStateThe value of vRtrPimNgAFIfTrackSprtOperState indicates the
operational status of PIM tracking support.
The value of vRtrPimNgAFIfTrackSprtOperState is set to 'true'
when all PIM routers on a LAN support join or prune tracking.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.2.3.1.12 |
vRtrPimNgIfNeighborTableThe table listing the router's PIM neighbors on an interface. SEQUENCE OF VRtrPimNgIfNeighborEntry .1.3.6.1.4.1.6527.3.1.2.50.2.4 |
vRtrPimNgIfNeighborEntryAn entry in the vRtrPimNgIfNeighborTable.
Entries in this table cannot be created or deleted using SNMP. VRtrPimNgIfNeighborEntry .1.3.6.1.4.1.6527.3.1.2.50.2.4.1 |
vRtrPimNgIfNeighborAddressTypeThe value of vRtrPimNgIfNeighborAddressType indicates the type of
IP address of the PIM neighbor. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.2.4.1.1 |
vRtrPimNgIfNeighborAddressThe value of vRtrPimNgIfNeighborAddress indicates the IP address
of the PIM neighbor for which this entry contains information. InetAddress .1.3.6.1.4.1.6527.3.1.2.50.2.4.1.2 |
vRtrPimNgIfNeighborUpTimeThe value of vRtrPimNgIfNeighborUpTime indicates the time since
this PIM neighbor (last) became a neighbor of the local router.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.50.2.4.1.3 |
vRtrPimNgIfNeighborExpiryTimeThe value of vRtrPimNgIfNeighborExpiryTime indicates the minimum
time remaining before this PIM neighbor will be aged out. If the
value of this object is zero, it means that this neighbor will
never be aged out. This happens when the PIM neighbor sends a
Hello message with Holdtime set to `0xffff'.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.50.2.4.1.4 |
vRtrPimNgIfNeighborGenIdThe value of vRtrPimNgIfNeighborGenId indicates a randomly generated
32-bit value that is regenerated each time PIM forwarding is started
or restarted on the interface, including when the router itself
restarts. When a Hello message with a new vRtrPimNgIfNeighborGenId
is received from a neighbor, any old Hello information about that
neighbor is discarded and superseded by the information from the new
Hello message.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.50.2.4.1.5 |
vRtrPimNgIfNeighborDrPriorityThe value of vRtrPimNgIfNeighborDrPriority indicates neighbor's
DR priority which is received in the hello message. If the Hello
Message did not contain the DR priority field, the value of this
object will be set to '1' and vRtrPimNgIfNeighborDrPriorPrsnt
will be set to 'false'.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.50.2.4.1.6 |
vRtrPimNgIfNeighborDrPriorPrsntThe value of vRtrPimNgIfNeighborDrPriorPrsnt indicates whether the DR
priority field was present in the Hello message received from the
PIM neighbor. If present, the value is set to 'true'.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.2.4.1.7 |
vRtrPimNgIfNeighborLanDelayThe value of vRtrPimNgIfNeighborLanDelay indicates the lan delay field
present in the Hello message received from the neighbor. If the
neighbor did not send this field, a default value of 500 ms is used
and the value of vRtrPimNgIfNeighborLanDlayPrsnt is set to 'false'.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.6527.3.1.2.50.2.4.1.8 |
vRtrPimNgIfNeighborLanDlayPrsntThe value of vRtrPimNgIfNeighborLanDlayPrsnt indicates whether the
Hello message received from the neighbor contained the Lan Delay field.
If present, the value is set to 'true'.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.2.4.1.9 |
vRtrPimNgIfNeighborTrckngSpprtThe value of vRtrPimNgIfNeighborTrckngSpprt indicates whether the
T bit in the LAN Prune Delay option was present in the Hello message.
This indicates the neighbor's capability to disable Join
message suppression.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.2.4.1.10 |
vRtrPimNgIfNeighborHoldTimeThe value of vRtrPimNgIfNeighborHoldTime contains the value of the
hold time present in the Hello message.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.50.2.4.1.11 |
vRtrPimNgIfNeighborOvrdeIntrvlThe value of vRtrPimNgIfNeighborOvrdeIntrvl contains the value of the
override interval present in the Hello message.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.6527.3.1.2.50.2.4.1.12 |
vRtrPimNgIfGrpSrcTableThe table listing the (*,*,RP), (*,G) and (S,G) and (S,G,rpt)
entries for which this particular interface has state. SEQUENCE OF VRtrPimNgIfGrpSrcEntry .1.3.6.1.4.1.6527.3.1.2.50.2.5 |
vRtrPimNgIfGrpSrcEntryAn entry in the vRtrPimNgIfGrpSrcTable. This is a read-only table. VRtrPimNgIfGrpSrcEntry .1.3.6.1.4.1.6527.3.1.2.50.2.5.1 |
vRtrPimNgIfGrpSrcTypeThe value of vRtrPimNgIfGrpSrcType indicates the type of this entry
for this table. Enumeration .1.3.6.1.4.1.6527.3.1.2.50.2.5.1.1 |
vRtrPimNgIfGrpSrcGroupAddrTypeThe value of vRtrPimNgIfGrpSrcGroupAddrType indicates the type of
address of the multicast group address. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.2.5.1.2 |
vRtrPimNgIfGrpSrcGroupAddressThe value of vRtrPimNgIfGrpSrcGroupAddress indicates the multicast
group address of the entry. It will be zero if the
vRtrPimNgIfGrpSrcType is 'starStarRP'. InetAddress .1.3.6.1.4.1.6527.3.1.2.50.2.5.1.3 |
vRtrPimNgIfGrpSrcSourceAddrTypeThe value of vRtrPimNgIfGrpSrcSourceAddrType indicates the type of
source address of the multicast sender. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.2.5.1.4 |
vRtrPimNgIfGrpSrcSourceAddressThe value of vRtrPimNgIfGrpSrcSourceAddress indicates the source
address of the multicast sender. It will be zero if the
vRtrPimNgIfGrpSrcType is 'starG' and it will be the address of
the Rendezvous Point(RP) if the vRtrPimNgIfGrpSrcType is 'starStarRP'. InetAddress .1.3.6.1.4.1.6527.3.1.2.50.2.5.1.5 |
vRtrPimNgIfGrpSrcRPAddrTypeThe value of vRtrPimNgIfGrpSrcRPAddrType indicates the type of
address of the Rendezvous Point(RP).ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.2.5.1.6 |
vRtrPimNgIfGrpSrcRPAddressThe value of vRtrPimNgIfGrpSrcRPAddress indicates the address of the
Rendezvous Point(RP).ro InetAddress .1.3.6.1.4.1.6527.3.1.2.50.2.5.1.7 |
vRtrPimNgIfGrpSrcJPStateThe value of vRtrPimNgIfGrpSrcJPState indicates the Join Prune state
for this entry on the interface. PIM Join or Prune messages are sent
by the downstream routers towards the RPF' neighbor.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.50.2.5.1.8 |
vRtrPimNgIfGrpSrcPrunePendTimerThe value of vRtrPimNgIfGrpSrcPrunePendTimer indicates the time
remaining before the router transitions the value of
vRtrPimNgIfGrpSrcJPState to 'noInfo'. The timer is set when the
PIM Prune message is received.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.50.2.5.1.9 |
vRtrPimNgIfGrpSrcJoinPruneTimerThe value of vRtrPimNgIfGrpSrcJoinPruneTimer indicates the time
remaining before the router transitions the value of
vRtrPimNgIfGrpSrcJPState to 'noInfo'.
The timer is started or restarted when a valid Join message is
received. If the value of this object is zero and
vRtrPimNgIfGrpSrcJPState is 'join' state, it means that the
downstream router sent a holdtime of '0xffff'. In this case,
vRtrPimNgIfGrpSrcJPState will not transition until an appropriate
cancelling of Join or Prune message is received.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.50.2.5.1.10 |
vRtrPimNgIfGrpSrcJPRptStateThe value of vRtrPimNgIfGrpSrcJPRptState indicates the Join Prune
Rpt state for this entry on the interface. PIM Join or Prune messages
are sent by the downstream routers towards the RPF' neighbor.
(S,G,rpt) state is a result of receiving (S,G, rpt) JP message from
the downstream router on the RP tree.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.50.2.5.1.11 |
vRtrPimNgIfGrpSrcRptPrnePendTmrThe value of vRtrPimNgIfGrpSrcRptPrnePendTmr indicates the time
remaining before the router transitions the value of
vRtrPimNgIfGrpSrcJPRptState to 'noInfo'. The timer is set when
the (S,G,rpt) PIM Prune message is received.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.50.2.5.1.12 |
vRtrPimNgIfGrpSrcRptJoinPrneTmrThe value of vRtrPimNgIfGrpSrcRptJoinPrneTmr indicates the time
remaining before the router transitions the value of
vRtrPimNgIfGrpSrcJPRptState to 'noInfo'.
The timer is started or restarted when a valid Join message is
received. If the value of this object is zero and
vRtrPimNgIfGrpSrcJPRptState is in 'join' state, it means that the
downstream router sent a holdtime of '0xffff'. In this case,
vRtrPimNgIfGrpSrcJPRptState will not transition until an appropriate
cancelling of Join or Prune message is received from the
downstream router.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.50.2.5.1.13 |
vRtrPimNgIfGrpSrcAssertStateThe value of vRtrPimNgIfGrpSrcAssertState indicates the ASSERT state
for this entry. Where multiple PIM routers peer over a shared LAN it
is possible for more than one upstream router to have valid forwarding
state for a packet, which can lead to packet duplication. PIM does not
attempt to prevent this from occurring. Instead it detects when this
has happened and elects a single forwarder amongst the upstream
routers to prevent further duplication. This election is performed
using PIM Assert messages. Assert messages are also received by
downstream routers on the LAN, and these cause subsequent Join or
Prune messages to be sent to the upstream router that won the Assert.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.50.2.5.1.14 |
vRtrPimNgIfGrpSrcAssertTimerThe value of vRtrPimNgIfGrpSrcAssertTimer indicates the
time remaining before the router transitions the
vRtrPimNgIfGrpSrcAssertState to 'noInfo' if
the value of vRtrPimNgIfGrpSrcAssertState is 'lostAssert'. If
the value of vRtrPimNgIfGrpSrcAssertState is 'wonAssert',
the value of vRtrPimNgIfGrpSrcAssertTimer indicates the
time remaining before it resends the ASSERT message.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.50.2.5.1.15 |
vRtrPimNgIfGrpSrcAssertMetricThe value of vRtrPimNgIfGrpSrcAssertMetric indicates the metric
associated by the MRIB for the route towards the source or the RP.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.50.2.5.1.16 |
vRtrPimNgIfGrpSrcAsrtMetricPrefThe value of vRtrPimNgIfGrpSrcAsrtMetricPref indicates the preference
associated by the MRIB for the route towards the source or the RP.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.50.2.5.1.17 |
vRtrPimNgIfGrpSrcAssertRPTBitThe value of vRtrPimNgIfGrpSrcAssertRPTBit is 'true' if the
RPT bit is set and 'false' when the RPT bit is not set.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.2.5.1.18 |
vRtrPimNgIfGrpSrcAsrtWinnerMtrcThe value of vRtrPimNgIfGrpSrcAsrtWinnerMtrc indicates the
ASSERT winner's metric associated by it's MRIB for the route
towards the source or the RP.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.50.2.5.1.19 |
vRtrPimNgIfGrpSrcAsrtWnrMtrcPrfThe value of vRtrPimNgIfGrpSrcAsrtWnrMtrcPrf indicates the
ASSERT winner's preference associated by it's MRIB for the
route towards the source or the RP.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.50.2.5.1.20 |
vRtrPimNgIfGrpSrcAsrtWnrRPTBitThe value of vRtrPimNgIfGrpSrcAsrtWnrRPTBit is 'true' if the
RPT bit is set and 'false' when the RPT bit is not set.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.2.5.1.21 |
vRtrPimNgIfGrpSrcAsrtWnrAddrTypThe value of vRtrPimNgIfGrpSrcAsrtWnrAddrTyp indicates type of
address of the ASSERT winner's interface IP address.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.2.5.1.22 |
vRtrPimNgIfGrpSrcAsrtWinnerAddrThe value of vRtrPimNgIfGrpSrcAsrtWinnerAddr indicates the
ASSERT winner's interface IP address.ro InetAddress .1.3.6.1.4.1.6527.3.1.2.50.2.5.1.23 |
vRtrPimNgIfGrpSrcUpTimeThe value of vRtrPimNgIfGrpSrcUpTime indicates the time since
this source group entry got created.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.50.2.5.1.24 |
vRtrPimNgIfGrpSrcDataMtIfIndexThe value of vRtrPimNgIfGrpSrcDataMtIfIndex indicates the interface
index of the Multicast Tunnel(MT) interface. If the value of
vRtrPimNgIfGrpSrcDataMtIfIndex is zero, it indicates that there is no
data MT associated with this group-source interface to forward
multicast traffic into the service provider network. If the
value of vRtrPimNgIfGrpSrcDataMtIfIndex is non-zero, it indicates the
data MT tunnel that is used to forward multicast traffic into the
service provider network.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.6527.3.1.2.50.2.5.1.25 |
vRtrPimNgIfStatsTableThe table listing the PIM statistics for
a particular interface. SEQUENCE OF VRtrPimNgIfStatsEntry .1.3.6.1.4.1.6527.3.1.2.50.2.6 |
vRtrPimNgIfStatsEntryAn entry in the vRtrPimNgIfStatsTable. VRtrPimNgIfStatsEntry .1.3.6.1.4.1.6527.3.1.2.50.2.6.1 |
vRtrPimNgIfTxPktsThe value of vRtrPimNgIfTxPkts indicates the number of multicast data
packets transmitted on this interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.1 |
vRtrPimNgIfTxHellosThe value of vRtrPimNgIfTxHellos indicates the number of PIM
Hello messages transmitted on this interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.2 |
vRtrPimNgIfTxAssertsThe value of vRtrPimNgIfTxAsserts indicates the number of PIM
Assert messages transmitted on this interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.3 |
vRtrPimNgIfTxRegisterStopsThe value of vRtrPimNgIfTxRegisterStops indicates the number of PIM
Register Stop messages transmitted on this interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.4 |
vRtrPimNgIfTxRegisterStopErrsThe value of vRtrPimNgIfTxRegisterStopErrs indicates the number of PIM
errors while trasmitting PIM Register Stop messages
on this interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.5 |
vRtrPimNgIfTxBsmPdusThe value of vRtrPimNgIfTxBsmPdus indicates the number of PIM
Bootstrap Messages (BSM) transmitted on this interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.6 |
vRtrPimNgIfTxBsmErrsThe value of vRtrPimNgIfTxBsmErrs indicates the number of errors while
transmitting PIM Bootstrap Messages (BSM) on this interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.7 |
vRtrPimNgIfRxPktsThe value of vRtrPimNgIfRxPkts indicates the number of multicast data
packets received on this interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.8 |
vRtrPimNgIfRxHellosThe value of vRtrPimNgIfRxHellos indicates the number of PIM
hello messages received on this interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.9 |
vRtrPimNgIfRxHellosDroppedThe value of vRtrPimNgIfRxHellosDropped indicates the number of PIM
Hello messages which were received on this interface but were
dropped.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.10 |
vRtrPimNgIfRxNbrUnknownThe value of vRtrPimNgIfRxNbrUnknown indicates the number of PIM
messages (other than Hello messages) which were received on this
interface and were rejected because the adjacency with the neighbor
router was not already established.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.11 |
vRtrPimNgIfRxBadChecksumDiscardThe value of vRtrPimNgIfRxBadChecksumDiscard indicates the number of
PIM messages received on this interface which were discarded because
of bad checksum.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.12 |
vRtrPimNgIfRxBadVersionDiscardThe value of vRtrPimNgIfRxBadVersionDiscard indicates the number of
PIM messages with bad versions received on this interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.13 |
vRtrPimNgIfRxBadEncodingsThe value of vRtrPimNgIfRxBadEncodings indicates the number of PIM
messages with bad encodings received on this interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.14 |
vRtrPimNgIfRxAssertsThe value of vRtrPimNgIfRxAsserts indicates the number of PIM
Assert messages received on this interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.15 |
vRtrPimNgIfRxAssertErrsThe value of vRtrPimNgIfRxAssertErrs indicates the number of
errors while processing Assert messages received on this interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.16 |
vRtrPimNgIfRxRegistersThe value of vRtrPimNgIfRxRegisters indicates the number of PIM
Register messages received on this interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.17 |
vRtrPimNgIfRxRegisterErrsThe value of vRtrPimNgIfRxRegisterErrs indicates the number of
errors while processing Register messages received on this interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.18 |
vRtrPimNgIfRxNullRegistersThe value of vRtrPimNgIfRxNullRegisters indicates the number of PIM
Null Register messages received on this interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.19 |
vRtrPimNgIfRxRegisterStopsThe value of vRtrPimNgIfRxRegisterStops indicates the number of PIM
Register Stop messages received on this interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.20 |
vRtrPimNgIfRxRegisterStopErrsThe value of vRtrPimNgIfRxRegisterStopErrs indicates the number of
errors while processing Register Stop messages received on this
interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.21 |
vRtrPimNgIfRxCRPAdvNoRtrAlertThe value of vRtrPimNgIfRxCRPAdvNoRtrAlert indicates the number of
Candidate-RP Advertizements(C-RP-Adv) received on this interface
which had no router alert option set.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.22 |
vRtrPimNgIfRxBsmPdusThe value of vRtrPimNgIfRxBsmPdus indicates the number of
Bootstrap Messages received on this interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.23 |
vRtrPimNgIfRxBsmPduDropsThe value of vRtrPimNgIfRxBsmPduDrops indicates the number of
Bootstrap Messages received on this interface but were dropped.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.24 |
vRtrPimNgIfStarStarRPTypesThe value of vRtrPimNgIfStarStarRPTypes indicates the number of
entries in vRtrPimNgIfGrpSrcTable for which vRtrPimNgIfGrpSrcType
is 'starStarRP'.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.25 |
vRtrPimNgIfStarGTypesThe value of vRtrPimNgIfStarGTypes indicates the number of
entries in vRtrPimNgIfGrpSrcTable for which vRtrPimNgIfGrpSrcType
is 'starG'.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.26 |
vRtrPimNgIfSGTypesThe value of vRtrPimNgIfSGTypes indicates the number of
entries in vRtrPimNgIfGrpSrcTable for which vRtrPimNgIfGrpSrcType
is 'sg'.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.27 |
vRtrPimNgIfJoinPolicyDropsThe value of vRtrPimNgIfJoinPolicyDrops indicates the number of
times the join policy match resulted in dropping PIM Join-Prune
Message or one of the source group contained in the message.
PIM Join policies are configured using join policy objects in
vRtrPimNgGenPolicyTable.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.28 |
vRtrPimNgIfRegisterPolicyDropsThe value of vRtrPimNgIfRegisterPolicyDrops indicates the number of
times the register policy match resulted in dropping PIM Register
Message. PIM Register policies are configured using the register
policy objects in vRtrPimNgGenPolicyTable.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.29 |
vRtrPimNgIfBtrImpPolicyDropsThe value of vRtrPimNgIfBtrImpPolicyDrops indicates the number of
Bootstrap Messages received on this interface but were dropped
because of Bootstrap import policy. PIM Bootstrap import policies
are configured using bootstrap import policy objects in
vRtrPimNgGenPolicyTable.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.30 |
vRtrPimNgIfBtrExpPolicyDropsThe value of vRtrPimNgIfBtrExpPolicyDrops indicates the number of
Bootstrap Messages that were not transmitted on this interface
because of Bootstrap export policy. PIM Bootstrap export policies
are configured using bootstrap export policy objects in
vRtrPimNgGenPolicyTable.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.31 |
vRtrPimNgIfTxJoinPrunesThe value of vRtrPimNgIfTxJoinPrunes indicates the number of PIM
Join Prune messages transmitted on this interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.32 |
vRtrPimNgIfRxJoinPrunesThe value of vRtrPimNgIfRxJoinPrunes indicates the number of PIM
Join Prune messages received on this interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.33 |
vRtrPimNgIfRxInvalidJoinPrunesThe value of vRtrPimNgIfRxInvalidJoinPrunes indicates the number of
invalid PIM Join Prune messages received on this interface.
A Join Prune message is invalid when the RP address in the message
is not the RP for the group specified in the message.
If such a message arrives, a vRtrPimNgInvalidJoinPrune
notification is sent.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.34 |
vRtrPimNgIfRxInvalidRegistersThe value of vRtrPimNgIfRxInvalidRegisters indicates the number of
invalid PIM Register messages received on this interface.
A Register message is invalid when the RP address in the message
is not the RP for the group specified in the message. If such a
message arrives, a vRtrPimNgInvalidRegister notification is sent.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.35 |
vRtrPimNgIfRxUnknownPdusThe value of vRtrPimNgIfRxUnknownPdus indicates the number of
packets received with an unsupported PIM type.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.36 |
vRtrPimNgIfRxJoinPruneErrsThe value of vRtrPimNgIfRxJoinPruneErrs indicates the number of
errors while processing Join-Prune messages received on this
interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.37 |
vRtrPimNgIfRxBSMNoRouterAlertDropsThe value of vRtrPimNgIfRxBSMNoRouterAlertDrops indicates the number
of BSM messages that were dropped because router alert option was not
present.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.38 |
vRtrPimNgIfRxBSMWrongIfDropsThe value of vRtrPimNgIfRxBSMWrongIfDrops indicates the number of
BSM messages that were dropped either because they were not sent by
the correct RPF neighbor or because they arrived on the
wrong interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.39 |
vRtrPimNgIfMcacPolicyDropsThe value of the object vRtrPimNgIfMcacPolicyDrops indicates
the number times a PIM Group is dropped because of applying a
multicast CAC policy on this interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.40 |
vRtrPimNgIfTxIntraASADThe value of the object vRtrPimNgIfTxIntraASAD indicates the number
of Intra AS AD routes transmitted on this interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.41 |
vRtrPimNgIfRxIntraASADThe value of the object vRtrPimNgIfRxIntraASAD indicates the number
of Intra AS AD routes received on this interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.42 |
vRtrPimNgIfRxIntraASADErrsThe value of the object vRtrPimNgIfRxIntraASADErrs indicates the
number of errors while processing Intra AS AD routes received on this
interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.43 |
vRtrPimNgIfTxInterASADThe value of the object vRtrPimNgIfTxInterASAD indicates the number
of Inter AS AD routes transmitted on this interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.44 |
vRtrPimNgIfRxInterASADThe value of the object vRtrPimNgIfRxInterASAD indicates the number
of Inter AS AD routes received on this interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.45 |
vRtrPimNgIfRxInterASADErrsThe value of the object vRtrPimNgIfRxInterASADErrs indicates the
number of errors while processing Inter AS AD routes received on this
interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.46 |
vRtrPimNgIfTxSpmsiADThe value of the object vRtrPimNgIfTxSpmsiAD indicates the number
of S-PMSI AD routes transmitted on this interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.47 |
vRtrPimNgIfRxSpmsiADThe value of the object vRtrPimNgIfRxSpmsiAD indicates the number
of S-PMSI AD routes received on this interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.48 |
vRtrPimNgIfRxSpmsiADErrsThe value of the object vRtrPimNgIfRxSpmsiADErrs indicates the
number of errors while processing S-PMSI AD routes received on
this interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.49 |
vRtrPimNgIfTxLeafADThe value of the object vRtrPimNgIfTxLeafAD indicates the number
of Leaf AD routes transmitted on this interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.50 |
vRtrPimNgIfRxLeafADThe value of the object vRtrPimNgIfRxLeafAD indicates the number
of Leaf AD routes received on this interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.51 |
vRtrPimNgIfRxLeafADErrsThe value of the object vRtrPimNgIfRxLeafADErrs indicates the
number of errors while processing Leaf AD routes received on
this interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.52 |
vRtrPimNgIfTxSrcActADThe value of the object vRtrPimNgIfTxSrcActAD indicates the number
of Source Active AD routes transmitted on this interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.53 |
vRtrPimNgIfRxSrcActADThe value of the object vRtrPimNgIfRxSrcActAD indicates the number
of Source Active AD routes received on this interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.54 |
vRtrPimNgIfTxSrcActADErrsThe value of the object vRtrPimNgIfTxSrcActADErrs indicates the
number of errors while processing Source Active AD routes received
on this interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.55 |
vRtrPimNgIfTxSharedTreeJoinThe value of the object vRtrPimNgIfTxSharedTreeJoin indicates the
number of Shared Tree Joins transmitted on this interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.56 |
vRtrPimNgIfRxSharedTreeJoinThe value of the object vRtrPimNgIfRxSharedTreeJoin indicates the
number of Shared Tree Joins received on this interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.57 |
vRtrPimNgIfRxSharedTreeJoinErrsThe value of the object vRtrPimNgIfRxSharedTreeJoinErrs indicates
the number of errors while processing Shared Tree Joins received
on this interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.58 |
vRtrPimNgIfTxSrcTreeJoinThe value of the object vRtrPimNgIfTxSrcTreeJoin indicates the
number of Source Tree Joins transmitted on this interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.59 |
vRtrPimNgIfRxSrcTreeJoinThe value of the object vRtrPimNgIfRxSrcTreeJoin indicates the
number of Source Tree Joins received on this interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.60 |
vRtrPimNgIfRxSrcTreeJoinErrsThe value of the object vRtrPimNgIfRxSrcTreeJoinErrs indicates the
number of errors while processing Source Tree Joins received on
this interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.61 |
vRtrPimNgIfTxBgpPktsThe value of the object vRtrPimNgIfTxBgpPkts indicates the number
of BGP Packets transmitted on this interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.62 |
vRtrPimNgIfRxBgpPktsThe value of the object vRtrPimNgIfRxBgpPkts indicates the number
of BGP Packets received on this interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.63 |
vRtrPimNgIfTxMdtSafiThe value of the object vRtrPimNgIfTxMdtSafi indicates the number
of MDT-SAFI AD routes transmitted on this interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.64 |
vRtrPimNgIfRxMdtSafiThe value of the object vRtrPimNgIfRxMdtSafi indicates the number
of MDT-SAFI AD routes received on this interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.65 |
vRtrPimNgIfRxMdtSafiErrsThe value of the object vRtrPimNgIfRxMdtSafiErrs indicates the
number of errors while processing MDT-SAFI AD routes received on this
interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.66 |
vRtrPimNgIfRxAutoRpGenErrsThe value of the object vRtrPimNgIfRxAutoRpGenErrs indicates the
number of errors while processing Auto-RP messages received on this
interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.67 |
vRtrPimNgIfRxAutoRpAnnounceThe value of the object vRtrPimNgIfRxAutoRpAnnounce indicates the
number Auto-RP announcements received on this interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.68 |
vRtrPimNgIfTxAutoRpAnnounceThe value of the object vRtrPimNgIfTxAutoRpAnnounce indicates the
number of Auto-RP announcements transmitted on this interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.69 |
vRtrPimNgIfRxAutoRpAnnounceErrsThe value of the object vRtrPimNgIfRxAutoRpAnnounceErrs indicates the
number of errors while processing Auto-RP announcements received on
this interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.70 |
vRtrPimNgIfTxAutoRpAnnounceErrsThe value of the object vRtrPimNgIfTxAutoRpAnnounceErrs indicates the
number of errors while transmitting Auto-RP announcements on this
interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.71 |
vRtrPimNgIfRxAutoRpMappingThe value of the object vRtrPimNgIfRxAutoRpMapping indicates the
number of Auto-RP mappings received on this interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.72 |
vRtrPimNgIfTxAutoRpMappingThe value of the object vRtrPimNgIfTxAutoRpMapping indicates the
number of Auto-RP mappings transmitted on this interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.73 |
vRtrPimNgIfRxAutoRpMappingErrsThe value of the object vRtrPimNgIfRxAutoRpMappingErrs indicates the
number of errors while processing Auto-RP mappings received on this
interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.74 |
vRtrPimNgIfTxAutoRpMappingErrsThe value of the object vRtrPimNgIfTxAutoRpMappingErrs indicates the
number of errors while transmitting Auto-RP mappings on this
interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.50.2.6.1.75 |
vRtrPimNgDataMtTableThe table lists the Data Multicast Tunnel(MT) interfaces.
An MT can be thought of as a connector between a set of PE routers
forming a Multicast Domain. From the perspective of a VPN-specific
PIM instance, an MT is a single multi-access interface.
An MT interface is created whenever the threshold of a C-(S,G)
exceeds the configured threshold value specified by
vRtrPimNgDataMtThd. If the data-threshold goes below the value
specified by vRtrPimNgDataMtThd, the MT interface is automatically
deleted. vRtrPimNgDataMtThd is present in another table
vRtrPimNgDataMtThdTable. SEQUENCE OF VRtrPimNgDataMtEntry .1.3.6.1.4.1.6527.3.1.2.50.2.7 |
vRtrPimNgDataMtEntryAn entry in the vRtrPimNgDataMtTable. This is a read-only table. VRtrPimNgDataMtEntry .1.3.6.1.4.1.6527.3.1.2.50.2.7.1 |
vRtrPimNgDataMtMdSourceAddrTypeThe value of vRtrPimNgDataMtMdSourceAddrType indicates the address
type of vRtrPimNgDataMtMdSourceAddress. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.2.7.1.1 |
vRtrPimNgDataMtMdSourceAddressThe value of vRtrPimNgDataMtMdSourceAddress indicates the source
address for a Multicast Tunnel. InetAddress .1.3.6.1.4.1.6527.3.1.2.50.2.7.1.2 |
vRtrPimNgDataMtMdGroupAddrTypeThe value of vRtrPimNgDataMtMdGroupAddrType indicates the address
type of vRtrPimNgDataMtMdGroupAddress. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.2.7.1.3 |
vRtrPimNgDataMtMdGroupAddressThe value of vRtrPimNgDataMtMdGroupAddress indicates the group
address for a Multicast Tunnel. InetAddress .1.3.6.1.4.1.6527.3.1.2.50.2.7.1.4 |
vRtrPimNgDataMtIfIndexThe value of vRtrPimNgDataMtIfIndex indicates the interface index
of the Multicast Data Tunnel(Data MT) interface. This value will be
non-zero integer value specific to the router.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6527.3.1.2.50.2.7.1.5 |
vRtrPimNgDataMtUptimeThe value of vRtrPimNgDataMtUptime indicates the time since this
data Multicast Tunnel(MT) entry got created.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.50.2.7.1.6 |
vRtrPimNgDataMtNumVpnSGsThe value of vRtrPimNgDataMtNumVpnSGs indicates the number of
C-(S,G)'s mapped to this Multicast Tunnel(MT) interface.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.50.2.7.1.7 |
vRtrPimNgDataMtCGrpSrcTableThe table lists the C-(S,G) mapped to the Data Multicast Tunnel(MT).
An entry in vRtrPimNgDataMtCGrpSrcTable is created whenever a C-(S,G)
is mapped to a MT interface. An entry will be deleted automatically
when the mapping between C-(S,G) and Data MT is removed. SEQUENCE OF VRtrPimNgDataMtCGrpSrcEntry .1.3.6.1.4.1.6527.3.1.2.50.2.8 |
vRtrPimNgDataMtCGrpSrcEntryAn entry in the vRtrPimNgDataMtCGrpSrcTable.
This is a read-only table. VRtrPimNgDataMtCGrpSrcEntry .1.3.6.1.4.1.6527.3.1.2.50.2.8.1 |
vRtrPimNgDataMtCGrpSrcGrpAdTypeThe value of vRtrPimNgDataMtCGrpSrcGrpAdType indicates the address
type of vRtrPimNgDataMtCGrpSrcGroupAddr. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.2.8.1.1 |
vRtrPimNgDataMtCGrpSrcGroupAddrThe value of vRtrPimNgDataMtCGrpSrcGroupAddr indicates the C-group
address. It is the IP version neutral address of the multicast
traffic destination address in the VPN. InetAddress .1.3.6.1.4.1.6527.3.1.2.50.2.8.1.2 |
vRtrPimNgDataMtCGrpSrcSrcAdTypeThe value of vRtrPimNgDataMtCGrpSrcSrcAdType indicates the
address type of vRtrPimNgDataMtCGrpSrcSrcAddr. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.2.8.1.3 |
vRtrPimNgDataMtCGrpSrcSrcAddrThe value of vRtrPimNgDataMtCGrpSrcSrcAddr indicates the C-source
address. It is the IP version neutral address of the traffic source
in the VPN. InetAddress .1.3.6.1.4.1.6527.3.1.2.50.2.8.1.4 |
vRtrPimNgDataMtCGrpSrcStateThe value of vRtrPimNgDataMtCGrpSrcState indicates the state of this
Multicast Tunnel(MT) (S,G).
If the data-mdt is bound to a (C-S,G) on the ingress PE and if the PE
has sent out a MDT Join TLV, the state will be txJoinPending. The
state will change to txJoined when the (C-S,G) traffic is switched over
to the new data mdt.
If the data-mdt is not bound to a (C-S,G) on the egress PE,
the state will be rxNotJoined. The state will be rxJoined if the
(C-S,G) has bound to the data-mdt.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.50.2.8.1.5 |
vRtrPimNgDataMtCGrpSrcJoinTimerThe value of vRtrPimNgDataMtCGrpSrcJoinTimer indicates the time
interval before the Provider Edge (PE) router connected to the
source switches to the Data Multicast Distribution Tree (MDT) group.
After providing sufficient time for all PE's to join the data MDT the
transmitting PE switches the given multicast stream to the Data MDT.
The PE router connected to the source then starts encapsulating
traffic using the Data MDT group.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.50.2.8.1.6 |
vRtrPimNgDataMtCGrpSrcHolddownTimerThe value of vRtrPimNgDataMtCGrpSrcHolddownTimer indicates the time
interval before which the PE router will switch back to the Default
MDT tree after it started encapsulating packets using the Data MDT
group. This is used to avoid oscillation when traffic is bursty.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.50.2.8.1.7 |
vRtrPimNgDataMtCGrpSrcExpiryTimerThe value of vRtrPimNgDataMtCGrpSrcExpiryTimer indicates the time
interval after which the Provider Edge (PE) router connected to the
receivers time out Multicast Distribution Tree Join Tag Length Value
(TLV) received and leave the data MDT group. This value must be
consistent among PE routers.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.50.2.8.1.8 |
vRtrPimNgDataMtCGrpSrcUptimeThe value of vRtrPimNgDataMtCGrpSrcUptime indicates the time since
this data Multicast Tunnel(MT) entry got created.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.50.2.8.1.9 |
vRtrPimNgDataMtCGrpSrcDataMtThresholdThe value of vRtrPimNgDataMtCGrpSrcDataMtThreshold indicates the
threshold in kilo-bits per second(kbps) for the group to which
this C-(S,G) belongs.
For a C-group G configured with a threshold, a C-(S,G) is
mapped to a Data Multicast Tunnel (MT) only if the C-(S,G)'s rate
exceeds this configured threshold.ro Unsigned32 UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.50.2.8.1.10 |
vRtrPimNgDataMtCGrpSrcIfIndexThe value of vRtrPimNgDataMtCGrpSrcIfIndex indicates the interface
index of the Multicast Data Tunnel(Data MT) interface. This value
will be non-zero integer value specific to the router.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6527.3.1.2.50.2.8.1.11 |
vRtrPimNgIfSecNbrTblLstChangedThe value of vRtrPimNgIfSecNbrTblLstChanged indicates the sysUpTime
at the time of the last modification of an entry in the
vRtrPimNgIfSecNbrTable.
If no changes were made to the table since the last re-initialization
of the local network management subsystem, then this object contains a
zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.50.2.9 |
vRtrPimNgIfSecNbrTableThe table lists the secondary addresses advertised by PIM neighbor. SEQUENCE OF VRtrPimNgIfSecNbrEntry .1.3.6.1.4.1.6527.3.1.2.50.2.10 |
vRtrPimNgIfSecNbrEntryEach row entry represents each secondary address advertised by each
of the router's PIM neighbors. The Address List Option
advertises all the secondary addresses associated with the source
interface of the router originating the HELLO message. Entries in this
table cannot be created or deleted using SNMP. VRtrPimNgIfSecNbrEntry .1.3.6.1.4.1.6527.3.1.2.50.2.10.1 |
vRtrPimNgIfSecNbrAddrTypeThe value of vRtrPimNgIfSecNbrAddrType indicates the type of
IP address of the PIM secondary neighbor.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.2.10.1.1 |
vRtrPimNgIfSecNbrAddressThe value of vRtrPimNgIfSecNbrAddress indicates the IP address
of the PIM secondary neighbor.ro InetAddress .1.3.6.1.4.1.6527.3.1.2.50.2.10.1.2 |
vRtrPimNgRsvpPmsiTableThe table lists the RSVP Provider-Network Multicast Service (PMSI)
interfaces.
A PMSI can be thought of as a connector between a set of PE routers
forming a Multicast Domain. From the perspective of a VPN-specific
PIM instance, a PMSI is a single multi-access interface.
A PMSI interface is created whenever the threshold of a C-(S,G)
exceeds the configured threshold value specified by vRtrPimNgDataMtThd.
If the data-threshold goes below the value specified by
vRtrPimNgDataMtThd, the PMSI interface is automatically deleted. SEQUENCE OF VRtrPimNgRsvpPmsiEntry .1.3.6.1.4.1.6527.3.1.2.50.2.11 |
vRtrPimNgRsvpPmsiEntryAn entry in the vRtrPimNgRsvpPmsiTable. This is a read-only table. VRtrPimNgRsvpPmsiEntry .1.3.6.1.4.1.6527.3.1.2.50.2.11.1 |
vRtrPimNgRsvpPmsiExtTunlAdrTypeThe value of vRtrPimNgRsvpPmsiExtTunlAdrType indicates the address
type of vRtrPimNgRsvpPmsiExtTunnelAddr. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.2.11.1.1 |
vRtrPimNgRsvpPmsiExtTunnelAddrThe value of vRtrPimNgRsvpPmsiExtTunnelAddr indicates the extended
Tunnel address for a PMSI. InetAddress .1.3.6.1.4.1.6527.3.1.2.50.2.11.1.2 |
vRtrPimNgRsvpPmsiTunnelIdThe value of vRtrPimNgRsvpPmsiTunnelId indicates the Source RSVP
Tunnel Identifier for a PMSI. Unsigned32 .1.3.6.1.4.1.6527.3.1.2.50.2.11.1.3 |
vRtrPimNgRsvpPmsiP2MPIdThe value of vRtrPimNgRsvpPmsiP2MPId indicates the P2MP Identifier
for a PMSI. Unsigned32 .1.3.6.1.4.1.6527.3.1.2.50.2.11.1.4 |
vRtrPimNgRsvpPmsiIfIndexThe value of vRtrPimNgRsvpPmsiIfIndex indicates the interface index
of the RSVP PMSI. This value will be non-zero integer value specific
to the router.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6527.3.1.2.50.2.11.1.5 |
vRtrPimNgRsvpPmsiUptimeThe value of vRtrPimNgRsvpPmsiUptime indicates the time since this
RSVP PMSI entry got created.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.50.2.11.1.6 |
vRtrPimNgRsvpPmsiNumVpnSGsThe value of vRtrPimNgRsvpPmsiNumVpnSGs indicates the number of
C-(S,G)'s mapped to this PMSI.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.50.2.11.1.7 |
vRtrPimNgRsvpPmsiIfTypeThe value of vRtrPimNgRsvpPmsiIfType indicates whether this PMSI
interface is of type transmitter or reciever.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.50.2.11.1.8 |
vRtrPimNgRsvpPmsiCGrpSrcTableThe table lists the C-(S,G) mapped to the RSVP Provider-Network
Multicast Service Interface (PMSI).
An entry in vRtrPimNgRsvpPmsiCGrpSrcTable is created whenever a C-(S,G)
is mapped to a PMSI interface. An entry will be deleted automatically
when the mapping between C-(S,G) and RSVP PMSI is removed. SEQUENCE OF VRtrPimNgRsvpPmsiCGrpSrcEntry .1.3.6.1.4.1.6527.3.1.2.50.2.12 |
vRtrPimNgRsvpPmsiCGrpSrcEntryAn entry in the vRtrPimNgRsvpPmsiCGrpSrcTable.
This is a read-only table. VRtrPimNgRsvpPmsiCGrpSrcEntry .1.3.6.1.4.1.6527.3.1.2.50.2.12.1 |
vRtrPimRsvpPmsiCGrpSrcGrpAdTypeThe value of vRtrPimRsvpPmsiCGrpSrcGrpAdType indicates the address
type of vRtrPimRsvpPmsiCGrpSrcGrpAddr. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.2.12.1.1 |
vRtrPimRsvpPmsiCGrpSrcGrpAddrThe value of vRtrPimRsvpPmsiCGrpSrcGrpAddr indicates the C-group
address. It is the IP version neutral address of the multicast
traffic destination address in the VPN. InetAddress .1.3.6.1.4.1.6527.3.1.2.50.2.12.1.2 |
vRtrPimRsvpPmsiCGrpSrcSrcAdTypeThe value of vRtrPimRsvpPmsiCGrpSrcSrcAdType indicates the
address type of vRtrPimRsvpPmsiCGrpSrcSrcAddr. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.2.12.1.3 |
vRtrPimRsvpPmsiCGrpSrcSrcAddrThe value of vRtrPimRsvpPmsiCGrpSrcSrcAddr indicates the C-source
address. It is the IP version neutral address of the traffic source
in the VPN. InetAddress .1.3.6.1.4.1.6527.3.1.2.50.2.12.1.4 |
vRtrPimRsvpPmsiCGrpSrcStateThe value of vRtrPimRsvpPmsiCGrpSrcState indicates the state of this
PMSI (S,G).
If the S-PMSI is bound to a (C-S,G) on the ingress PE and if the PE
is allocating a RSVP PMSI, the state will be 'txJoinPending'. The
state will change to 'txJoined' when the (C-S,G) traffic is switched
over to the new S-PMSI.
If the S-PMSI is not bound to a (C-S,G) on the egress PE,
the state will be 'rxNotJoined'. The state will be 'rxJoined' if the
(C-S,G) has bound to the S-PMSI.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.50.2.12.1.5 |
vRtrPimRsvpPmsiCGrpSrcJoinTimerThe value of vRtrPimRsvpPmsiCGrpSrcJoinTimer indicates the time
interval before the Provider Edge (PE) router connected to the
source switches to the S-PMSI group.
After providing sufficient time for all PE's to join the S-PMSI, the
transmitting PE switches the given multicast stream to the S-PMSI.
The PE router connected to the source then starts encapsulating
traffic using the S-PMSI group.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.50.2.12.1.6 |
vRtrPimRsvpPmsiCGrpSrcHldDnTimerThe value of vRtrPimRsvpPmsiCGrpSrcHldDnTimer indicates the time
interval before which the PE router will switch back to the Default
S-PMSI after it started encapsulating packets using the S-PMSI
group. This is used to avoid oscillation when traffic is bursty.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.50.2.12.1.7 |
vRtrPimRsvpPmsiCGrpSrcExpTimerThe value of vRtrPimRsvpPmsiCGrpSrcExpTimer indicates the time
interval after which the Provider Edge (PE) router connected to the
receivers to time out S-PMSI Join Tag Length Value (TLV) received and
leave the S-PMSI group. This value must be consistent among PE
routers.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.50.2.12.1.8 |
vRtrPimRsvpPmsiCGrpSrcUptimeThe value of vRtrPimRsvpPmsiCGrpSrcUptime indicates the time since
this entry got created.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.50.2.12.1.9 |
vRtrPimDataMtCGrpSrcDataThreshThe value of vRtrPimDataMtCGrpSrcDataThresh indicates the
threshold in kilo-bits per second(kbps) for the group to which
this C-(S,G) belongs.
For a C-group G configured with a threshold, a C-(S,G) is
mapped to a PMSI only if the C-(S,G)'s rate exceeds this
configured threshold.ro Unsigned32 UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.50.2.12.1.10 |
vRtrPimRsvpPmsiCGrpSrcIfIndexThe value of vRtrPimRsvpPmsiCGrpSrcIfIndex indicates the interface
index of the RSVP S-PMSI. This value will be non-zero integer value
specific to the router.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6527.3.1.2.50.2.12.1.11 |
vRtrPimNgLdpPmsiTableThis table lists the Ldp Provider-Network Multicast Service (PMSI)
interfaces.
A PMSI can be thought of as a connector between a set of PE routers
forming a multicast domain. From the perspective of a VPN-specific
PIM instance, a PMSI is a single multi-access interface.
A PMSI interface is created whenever the threshold of a C-(S,G)
exceeds the configured threshold value specified by vRtrPimNgDataMtThd.
If the data-threshold goes below the value specified by
vRtrPimNgDataMtThd, the PMSI interface is automatically deleted. SEQUENCE OF VRtrPimNgLdpPmsiEntry .1.3.6.1.4.1.6527.3.1.2.50.2.13 |
vRtrPimNgLdpPmsiEntryAn entry in the vRtrPimNgLdpPmsiTable. This is a read-only table. VRtrPimNgLdpPmsiEntry .1.3.6.1.4.1.6527.3.1.2.50.2.13.1 |
vRtrPimNgLdpPmsiRootAddrTypeThe value of vRtrPimNgLdpPmsiRootAddrType indicates the address type
of vRtrPimNgLdpPmsiRootAddr. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.2.13.1.1 |
vRtrPimNgLdpPmsiRootAddrThe value of vRtrPimNgLdpPmsiRootAddr indicates the extended tunnel
address for a PMSI. InetAddress .1.3.6.1.4.1.6527.3.1.2.50.2.13.1.2 |
vRtrPimNgLdpPmsiLspIdThe value of vRtrPimNgLdpPmsiLspId indicates the LSP Identifier for a
PMSI. Unsigned32 .1.3.6.1.4.1.6527.3.1.2.50.2.13.1.3 |
vRtrPimNgLdpPmsiIfIndexThe value of vRtrPimNgLdpPmsiIfIndex indicates the interface index
of the Ldp PMSI. This value will be non-zero integer value specific
to the router.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6527.3.1.2.50.2.13.1.4 |
vRtrPimNgLdpPmsiUptimeThe value of vRtrPimNgLdpPmsiUptime indicates the time since the
Ldp PMSI entry was created.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.50.2.13.1.5 |
vRtrPimNgLdpPmsiNumVpnSGsThe value of vRtrPimNgLdpPmsiNumVpnSGs indicates the number of
C-(S,G)'s mapped to this PMSI.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.50.2.13.1.6 |
vRtrPimNgLdpPmsiIfTypeThe value of vRtrPimNgLdpPmsiIfType indicates whether this PMSI
interface is of type transmitter or reciever.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.50.2.13.1.7 |
vRtrPimNgLdpPmsiCGrpSrcTableThe table lists the C-(S,G) mapped to the Ldp Provider-Network
Multicast Service Interface (PMSI).
An entry in vRtrPimNgLdpPmsiCGrpSrcTable is created whenever a C-(S,G)
is mapped to a PMSI interface. An entry will be deleted automatically
when the mapping between C-(S,G) and Ldp PMSI is removed. SEQUENCE OF VRtrPimNgLdpPmsiCGrpSrcEntry .1.3.6.1.4.1.6527.3.1.2.50.2.14 |
vRtrPimNgLdpPmsiCGrpSrcEntryAn entry in the vRtrPimNgLdpPmsiCGrpSrcTable. This is a read-only
table. VRtrPimNgLdpPmsiCGrpSrcEntry .1.3.6.1.4.1.6527.3.1.2.50.2.14.1 |
vRtrPimLdpPmsiCGrpSrcGrpAdTypeThe value of vRtrPimLdpPmsiCGrpSrcGrpAdType indicates the address
type of vRtrPimLdpPmsiCGrpSrcGrpAddr. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.2.14.1.1 |
vRtrPimLdpPmsiCGrpSrcGrpAddrThe value of vRtrPimLdpPmsiCGrpSrcGrpAddr indicates the C-group
address. It is the IP version neutral address of the multicast
traffic destination address in the VPN. InetAddress .1.3.6.1.4.1.6527.3.1.2.50.2.14.1.2 |
vRtrPimLdpPmsiCGrpSrcSrcAdTypeThe value of vRtrPimLdpPmsiCGrpSrcSrcAdType indicates the
address type of vRtrPimLdpPmsiCGrpSrcSrcAddr. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.2.14.1.3 |
vRtrPimLdpPmsiCGrpSrcSrcAddrThe value of vRtrPimLdpPmsiCGrpSrcSrcAddr indicates the C-source
address. It is the IP version neutral address of the traffic source
in the VPN. InetAddress .1.3.6.1.4.1.6527.3.1.2.50.2.14.1.4 |
vRtrPimLdpPmsiCGrpSrcStateThe value of vRtrPimLdpPmsiCGrpSrcState indicates the state of this
PMSI (S,G).
If the S-PMSI is bound to a (C-S,G) on the ingress PE and if the PE
is allocating a Ldp PMSI, the state will be 'txJoinPending'. The
state will change to 'txJoined' when the (C-S,G) traffic is switched
over to the new S-PMSI.
If the S-PMSI is not bound to a (C-S,G) on the egress PE, the state
will be 'rxNotJoined'. The state will be 'rxJoined' if the (C-S,G) has
bound to the S-PMSI.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.50.2.14.1.5 |
vRtrPimLdpPmsiCGrpSrcJoinTimerThe value of vRtrPimLdpPmsiCGrpSrcJoinTimer indicates the time
interval before the Provider Edge (PE) router connected to the
source switches to the S-PMSI group.
After providing sufficient time for all PE's to join the S-PMSI, the
transmitting PE switches the given multicast stream to the S-PMSI.
The PE router connected to the source then starts encapsulating
traffic using the S-PMSI group.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.50.2.14.1.6 |
vRtrPimLdpPmsiCGrpSrcHldDnTimerThe value of vRtrPimLdpPmsiCGrpSrcHldDnTimer indicates the time
interval before which the PE router will switch back to the Default
S-PMSI after it started encapsulating packets using the S-PMSI
group. This is used to avoid oscillation when traffic is bursty.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.50.2.14.1.7 |
vRtrPimLdpPmsiCGrpSrcExpTimerThe value of vRtrPimLdpPmsiCGrpSrcExpTimer indicates the time
interval after which the Provider Edge (PE) router connected to the
receivers time out S-PMSI Join Tag Length Value (TLV) received and
leave the S-PMSI group. This value must be consistent among PE
routers.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.50.2.14.1.8 |
vRtrPimLdpPmsiCGrpSrcUptimeThe value of vRtrPimLdpPmsiCGrpSrcUptime indicates the time since
the entry was created.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.50.2.14.1.9 |
vRtrPimLdpDataMtCGrpSrcDataThresThe value of vRtrPimLdpDataMtCGrpSrcDataThres indicates the
threshold in kilo-bits per second(kbps) for the group to which
this C-(S,G) belongs. For a C-group G configured with a threshold, a
C-(S,G) is mapped to a PMSI only if the C-(S,G)'s rate exceeds this
configured threshold.ro Unsigned32 UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.50.2.14.1.10 |
vRtrPimLdpPmsiCGrpSrcIfIndexThe value of vRtrPimLdpPmsiCGrpSrcIfIndex indicates the interface
index of the Ldp S-PMSI. This value will be non-zero integer value
specific to the router.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6527.3.1.2.50.2.14.1.11 |
vRtrPimNgRsvpIPmsiTableThe table lists the RSVP Inclusive Provider-Network Multicast Service
(IPMSI) interfaces.
A PMSI can be thought of as a connector between a set of PE routers
forming a Multicast Domain. From the perspective of a VPN-specific
PIM instance, a PMSI is a single multi-access interface.
IPMSI's are used for transmitting the MVPN's multicast data from one
PE to others. SEQUENCE OF VRtrPimNgRsvpIPmsiEntry .1.3.6.1.4.1.6527.3.1.2.50.2.15 |
vRtrPimNgRsvpIPmsiEntryAn entry in the vRtrPimNgRsvpIPmsiTable. This is a read-only table. VRtrPimNgRsvpIPmsiEntry .1.3.6.1.4.1.6527.3.1.2.50.2.15.1 |
vRtrPimNgRsvpIPmsiExtTunlAdrTypeThe value of vRtrPimNgRsvpIPmsiExtTunlAdrType indicates the address
type of vRtrPimNgRsvpIPmsiExtTunnelAddr.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.2.15.1.1 |
vRtrPimNgRsvpIPmsiExtTunnelAddrThe value of vRtrPimNgRsvpIPmsiExtTunnelAddr indicates the extended
tunnel address for this IPMSI.ro InetAddress .1.3.6.1.4.1.6527.3.1.2.50.2.15.1.2 |
vRtrPimNgRsvpIPmsiLspNameThe value of vRtrPimNgRsvpIPmsiLspName indicates the the RSVP
point to multipoint (P2MP) lsp name associated with this IPMSI.
In case of terminating IPMSI's the value of vRtrPimNgRsvpIPmsiLspName
indicates the name of the tunnel interface.ro TNamedItem (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.50.2.15.1.3 |
vRtrPimNgRsvpIPmsiP2MPIdThe value of vRtrPimNgRsvpIPmsiP2MPId indicates the P2MP Identifier
associated with this IPMSI.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.50.2.15.1.4 |
vRtrPimNgRsvpIPmsiTunnelIdThe value of vRtrPimNgRsvpIPmsiTunnelId indicates the tunnel
identifier associated with this IPMSI.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.50.2.15.1.5 |
vRtrPimNgLdpIPmsiTableThis table lists the Ldp Inclusive Provider-Network Multicast Service
(IPMSI) interfaces.
A PMSI can be thought of as a connector between a set of PE routers
forming a multicast domain. From the perspective of a VPN-specific
PIM instance, a PMSI is a single multi-access interface.
IPMSI's are used for transmitting the MVPN's multicast data from one
PE to others. SEQUENCE OF VRtrPimNgLdpIPmsiEntry .1.3.6.1.4.1.6527.3.1.2.50.2.16 |
vRtrPimNgLdpIPmsiEntryAn entry in the vRtrPimNgLdpIPmsiTable. This is a read-only table. VRtrPimNgLdpIPmsiEntry .1.3.6.1.4.1.6527.3.1.2.50.2.16.1 |
vRtrPimNgLdpIPmsiRootAddrTypeThe value of vRtrPimNgLdpIPmsiRootAddrType indicates the address type
of vRtrPimNgLdpIPmsiRootAddr.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.2.16.1.1 |
vRtrPimNgLdpIPmsiRootAddrThe value of vRtrPimNgLdpIPmsiRootAddr indicates the root address for
the IPMSI.ro InetAddress .1.3.6.1.4.1.6527.3.1.2.50.2.16.1.2 |
vRtrPimNgLdpIPmsiLspIdThe value of vRtrPimNgLdpIPmsiLspId indicates the lsp identifier
associated with the IPMSI.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.50.2.16.1.3 |
vRtrPimNgLdpIPmsiLspNameThe value of vRtrPimNgLdpIPmsiLspName indicates the lsp name
associated with the IPMSI.
In case of terminating IPMSI's the value of vRtrPimNgLdpIPmsiLspName
indicates the name of the tunnel interface.ro TNamedItem (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.50.2.16.1.4 |
vRtrPimNgMvpnExtranetTableThis table lists the global MVPN Extranet database. It consists of
source MVPN, receiver MVPN and the route to the source. SEQUENCE OF VRtrPimNgMvpnExtranetEntry .1.3.6.1.4.1.6527.3.1.2.50.2.17 |
vRtrPimNgMvpnExtranetEntryAn entry in the vRtrPimNgMvpnExtranetTable represents a pairing of
source and receiver MVPN using a particular route. This is a read-only
table. VRtrPimNgMvpnExtranetEntry .1.3.6.1.4.1.6527.3.1.2.50.2.17.1 |
vRtrPimNgMvpnExtranetNHAddrTypeThe value of vRtrPimNgMvpnExtranetNHAddrType indicates the address type
of vRtrPimNgMvpnExtranetNHAddr. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.2.17.1.1 |
vRtrPimNgMvpnExtranetNHAddrThe value of vRtrPimNgMvpnExtranetNHAddr indicates the next hop
address in order to reach the MVPN where the source is present. InetAddress .1.3.6.1.4.1.6527.3.1.2.50.2.17.1.2 |
vRtrPimNgMvpnExtranetRDThe value of vRtrPimNgMvpnExtranetRD indicates the Route Distinguisher
used to reach the MVPN where source is present. TmnxVPNRouteDistinguisher (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.50.2.17.1.3 |
vRtrPimNgMvpnExtranetSrcMvpnThe value of vRtrPimNgMvpnExtranetSrcMvpn indicates the
souce MVPN id. Unsigned32 .1.3.6.1.4.1.6527.3.1.2.50.2.17.1.4 |
vRtrPimNgMvpnExtranetRecvMvpnThe value of vRtrPimNgMvpnExtranetRecvMvpn indicates the
reciever MVPN id. Unsigned32 .1.3.6.1.4.1.6527.3.1.2.50.2.17.1.5 |
vRtrPimNgMvpnExtranetRecvRefCntThe value of vRtrPimNgMvpnExtranetRecvRefCnt indicates the number
of recievers in the reciever MVPN which expect to recieve Extranet
traffic from this vRtrPimNgMvpnExtranetSrcMvpn.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.50.2.17.1.6 |
vRtrPimNgNotificationObjs OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.50.3 |
vRtrPimNgNotifySourceIpTypeThe value of vRtrPimNgNotifySourceIpType indicates the type of
the address from which the PIM message originated.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.3.1 |
vRtrPimNgNotifySourceIpThe value of vRtrPimNgNotifySourceIp indicates the address from
which the PIM message originated.ro InetAddress .1.3.6.1.4.1.6527.3.1.2.50.3.2 |
vRtrPimNgNotifyGroupAddrTypeThe value of vRtrPimNgNotifyGroupAddrType indicates the type of the
group address in the PIM message.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.3.3 |
vRtrPimNgNotifyGroupAddrThe value of vRtrPimNgNotifyGroupAddr indicates the group address
in the PIM message.ro InetAddress .1.3.6.1.4.1.6527.3.1.2.50.3.4 |
vRtrPimNgNotifyRPAddrTypeThe value of vRtrPimNgNotifyRPAddrType indicates the type of the
RP address on the router corresponding to the group address in
the PIM message.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.3.5 |
vRtrPimNgNotifyRPAddrThe value of vRtrPimNgNotifyRPAddr indicates the RP address on
the router corresponding to the group address in the PIM message.ro InetAddress .1.3.6.1.4.1.6527.3.1.2.50.3.6 |
vRtrPimNgNotifyWrongRPAddrTypeThe value of vRtrPimNgNotifyWrongRPAddrType indicates the type of
the RP address in the PIM message corresponding to the group address
in the message.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.3.7 |
vRtrPimNgNotifyWrongRPAddrThe value of vRtrPimNgNotifyWrongRPAddr indicates the RP address
in the PIM message corresponding to the group address in the message.
Whenever there is an disagreement between the RP address on the router
and the RP address in the PIM message, this object is used by the
notifications to send the RP address in the PIM message.ro InetAddress .1.3.6.1.4.1.6527.3.1.2.50.3.8 |
vRtrPimNgNotifyMsgTypeThe value of vRtrPimNgNotifyMsgType indicates the types of
PIM message. This object is used by vRtrPimNgGrpInSSMRange
notification to identify the type of PIM message.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.50.3.9 |
vRtrPimNgWrongMdtDefGrpAddrTypeThe value of vRtrPimNgWrongMdtDefGrpAddrType indicates the type of
address represented by vRtrPimNgWrongMdtDefGrpAddr.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.3.10 |
vRtrPimNgWrongMdtDefGrpAddrThe value of vRtrPimNgWrongMdtDefGrpAddr indicates the default
core group address of the Multicast Distribution Tree(MDT)
in the PIM message. Whenever there is a disagreement between
the default core group address on the router and the default
core group address in the PIM message, this object is used by
the notifications to send the default core group address in the
the PIM message.ro InetAddress .1.3.6.1.4.1.6527.3.1.2.50.3.11 |
vRtrPimNgWrongPmsiTypeThe value of vRtrPimNgWrongPmsiType indicates the type of
tunnel received in the PIM message. This object is used by
vRtrPimNgInvalidIPmsiTunnel notification to indicate the
tunnel type received in the PIM message.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.50.3.12 |
vRtrPimNgWrongPmsiP2mpIdThe value of vRtrPimNgWrongPmsiP2mpId indicates the P2MP Identifier
for a PMSI received in the PIM message. This object is used by
vRtrPimNgInvalidIPmsiTunnel notification to indicate the P2MP Identifier
received in the PIM message.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.50.3.13 |
vRtrPimNgWrongPmsiTunnelIdThe value of vRtrPimNgWrongPmsiTunnelId indicates the Source RSVP
Tunnel Identifier for a PMSI received in the PIM message. This object is
used by vRtrPimNgInvalidIPmsiTunnel notification to indicate the Tunnel
Identifier received in the PIM message.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.50.3.14 |
vRtrPimNgWrongPmsiExtTunlAdrTypThe value of vRtrPimNgWrongPmsiExtTunlAdrTyp indicates the address
type of vRtrPimNgWrongPmsiExtTunlAddr.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.3.15 |
vRtrPimNgWrongPmsiExtTunlAddrThe value of vRtrPimNgWrongPmsiExtTunlAddr indicates the Extended Tunnel
address for a PMSI received in the PIM message. This object is used by
vRtrPimNgInvalidIPmsiTunnel notification to indicate the Extended Tunnel
address received in the PIM message.ro InetAddress .1.3.6.1.4.1.6527.3.1.2.50.3.16 |
vRtrPimNgWrongVprnIdThe value of vRtrPimNgWrongVprnId indicates the VPRN of the PMSI
received in the PIM message. This object is used by
vRtrPimNgInvalidIPmsiTunnel notification to indicate the VPRN of the
received PIM message.ro TmnxVRtrID (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.50.3.17 |
vRtrPimNgWrongPmsiLdpLspIdThe value of vRtrPimNgWrongPmsiLdpLspId indicates the LSP Identifier
for a PMSI received in the PIM message. This object is used by
vRtrPimNgInvalidIPmsiTunnel notification to indicate the P2MP Identifier
received in the PIM message.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.50.3.18 |
vRtrPimNgWrongPmsiSenderAdrTypThe value of vRtrPimNgWrongPmsiSenderAdrTyp indicates the address
type of vRtrPimNgWrongPmsiSenderAddr.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.50.3.19 |
vRtrPimNgWrongPmsiSenderAddrThe value of vRtrPimNgWrongPmsiSenderAddr indicates the extended tunnel
address for a PMSI received in the PIM message. This object is used by
vRtrPimNgInvalidIPmsiTunnel notification to indicate the sender
address received in the PIM message.ro InetAddress .1.3.6.1.4.1.6527.3.1.2.50.3.20 |
vRtrPimNgNotifyPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.3.50 |
vRtrPimNgNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.3.50.0 |
vRtrPimNgIfNeighborLossA vRtrPimNgIfNeighborLoss notification is generated when the
PIM adjacency with a neighbor is lost. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.50.0.1 |
vRtrPimNgIfNeighborUpA vRtrPimNgIfNeighborUp notification is generated when the
PIM adjacency with a new neighbor is established. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.50.0.2 |
vRtrPimNgInvalidJoinPruneA vRtrPimNgInvalidJoinPrune notification is generated when an invalid
Join Prune message is received. A Join Prune message is deemed
invalid when there is an RP address disagreement between the router
and the PIM Join Prune message. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.50.0.3 |
vRtrPimNgInvalidRegisterA vRtrPimNgInvalidRegister notification is generated when an invalid
PIM Register message is received. A Register message is deemed
invalid when there is an RP address disagreement between the router
and the PIM Register message. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.50.0.4 |
vRtrPimNgGrpInSSMRangeA vRtrPimNgGrpInSSMRange notification is generated
when the router receives a register message, a (*,G) assert message,
a (*,G) Join Prune message or a IGMP local membership message for the
group defined in the SSM address range. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.50.0.5 |
vRtrPimNgBSRStateChangeA vRtrPimNgBSRStateChange notification is generated whenever there is
a change in the BSR state on the router. vRtrPimNgAFGenBSRState will
indicate the current BSR state. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.50.0.6 |
vRtrPimNgHelloDroppedA vRtrPimNgHelloDropped notification is generated whenever a hello
is dropped because the vRtrPimNgIfMulticastSenders flag is set to
'always'. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.50.0.7 |
vRtrPimNgSGLimitExceededA vRtrPimNgSGLimitExceeded notification is generated when
a (S,G) record is failed to be programmed to an IOM because the
supported (S,G) limit is exceeded. This limit is currently at
16000 (S,G) entries. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.50.0.8 |
vRtrPimNgReplicationLmtExceededA vRtrPimNgReplicationLmtExceeded notification is generated
when an IOM fails to program an OIF for an (S,G) record because
the replication limit for that (S,G) on that IOM has been reached.
The replication limit per (S,G) entry on an IOM is currently 127. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.50.0.9 |
vRtrPimNgMDTLimitExceededA vRtrPimNgMDTLimitExceeded notification is generated when the
configuration exceeds the maximum number of Multicast
Distribution Trees (MDTs) supported on the system. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.50.0.10 |
vRtrPimNgMaxGrpsLimitExceededThe vRtrPimNgMaxGrpsLimitExceeded event is generated when an attempt is
made to configure a group when vRtrPimNgAFIfCurrentGroups, the number of
groups configured on the PIM interface, is equal to vRtrPimNgIfMaxGroups,
the maximum number of groups supported on the system. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.50.0.11 |
vRtrPimNgDataMtReusedThe vRtrPimNgDataMtReused event is generated when a data MDT is reused,
i.e. a C (S,G) is mapped to a data MDT that is already in use by
another C (S,G). NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.50.0.12 |
vRtrPimNgMcacPlcyDroppedThe vRtrPimNgMcacPlcyDropped event is generated when a
PIM group is dropped on a given interface because of
applying a multicast CAC policy given by vRtrPimNgIfMcacPolicyName. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.50.0.13 |
vRtrPimNgInvalidIPmsiTunnel[CAUSE1] The vRtrPimNgInvalidIPmsiTunnel event is generated when an
invalid default core group address specified by
vRtrPimNgWrongMdtDefGrpAddr of the Multicast Distribution Tree(MDT) is
received in PIM message from vRtrPimNgNotifySourceIp, instead of the
expected addresss specified by vRtrPimNgAFGenMdtDefGrpAddress. It is
considered to be a misconfiguration and the message will be dropped.
This trap is intended to help network operators recognize the
misconfiguration and adjust their configurations accordingly.
[CAUSE2] This event is also generated when the tunnel type specified by
vRtrPimNgWrongPmsiType is received in PIM message from
vRtrPimNgNotifySourceIp which is different from the configured tunnel
type.
[EFFECT] The PMSI received in the PIM message from
vRtrPimNgNotifySourceIp is not processed by PIM.
[RECOVERY]: Operator needs to look and adjust the configuration of
vRtrPimNgNotifySourceIp in the VPRN specified by vRtrPimNgWrongVprnId.
The objects vRtrPimNgWrongPmsiP2mpId, vRtrPimNgWrongPmsiTunnelId and
vRtrPimNgWrongPmsiExtTunlAddr in the event vRtrPimNgInvalidIPmsiTunnel
are valid only when vRtrPimNgWrongPmsiType is 'rsvp (2)'.
The objects vRtrPimNgWrongMdtDefGrpAddrType and
vRtrPimNgWrongMdtDefGrpAddr in the event vRtrPimNgInvalidIPmsiTunnel
are valid only when vRtrPimNgWrongPmsiType is either 'pimSsm (0)' or
'pimSm (1)'.
The objects vRtrPimNgWrongPmsiLdpLspId, vRtrPimNgWrongPmsiSenderAdrTyp
and vRtrPimNgWrongPmsiSenderAddr in the event
vRtrPimNgInvalidIPmsiTunnel are valid only when vRtrPimNgWrongPmsiType
is 'ldp (3)'. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.50.0.14 |