TIMETRA-OAM-TEST-MIB
AI MIB Summary
The TIMETRA-OAM-TEST-MIB enables SNMP-based provisioning and management of Operations, Administration, and Maintenance (OAM) test sessions, including loopback and continuity check operations, on Alcatel-Lucent (now Nokia) SR OS routers. It provides the specific MIB objects required to configure, initiate, and monitor the status of these connectivity verification tests within the device's OAM framework.
This document is the SNMP MIB module to manage and provision the Alcatel-Lucent SROS OAM tests.
Copyright 2003-2013 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included.
This SNMP MIB module (Specification) embodies Alcatel-Lucent's proprietary intellectual property. Alcatel-Lucent retains all title and ownership in the Specification, including any revisions.
Alcatel-Lucent grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel-Lucent products, and without fee, provided this copyright notice and license appear on all copies.
This Specification is supplied 'as is', and Alcatel-Lucent makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
Main OID:
timetraOamTestMIBModule.1.3.6.1.4.1.6527.1.1.3.11
786
Objects
Active
Status
14
Dependencies
Imported Objects
Objects
786 total| Object Name |
|---|
timetraOamTestMIBModuleThis document is the SNMP MIB module to manage and provision the
Alcatel-Lucent SROS OAM tests.
Copyright 2003-2013 Alcatel-Lucent. All rights reserved.
Reproduction of this document is authorized on the condition that
the foregoing copyright notice is included.
This SNMP MIB module (Specification) embodies Alcatel-Lucent's
proprietary intellectual property. Alcatel-Lucent retains
all title and ownership in the Specification, including any
revisions.
Alcatel-Lucent grants all interested parties a non-exclusive
license to use and distribute an unmodified copy of this
Specification in connection with management of Alcatel-Lucent
products, and without fee, provided this copyright notice and
license appear on all copies.
This Specification is supplied 'as is', and Alcatel-Lucent
makes no warranty, either express or implied, as to the use,
operation, condition, or performance of the Specification. MODULE-IDENTITY .1.3.6.1.4.1.6527.1.1.3.11 |
tmnxOamTestConformance OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.11 |
tmnxOamPingConformance OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.11.1 |
tmnxOamPingCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.11.1.1 |
tmnxOamPingGroups OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.11.1.2 |
tmnxOamTraceRouteConformance OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.11.2 |
tmnxOamTrCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.11.2.1 |
tmnxOamTrGroups OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.11.2.2 |
tmnxOamSaaConformance OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.11.3 |
tmnxOamSaaCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.11.3.1 |
tmnxOamSaaGroups OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.11.3.2 |
tmnxOamMobGatewayConformance OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.11.4 |
tmnxOamGeneralConformance OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.11.5 |
tmnxOamGeneralCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.11.5.1 |
tmnxOamGeneralGroups OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.11.5.2 |
tmnxOamTestObjs OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.11 |
tmnxOamPingObjs OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.11.1 |
tmnxOamPingNotificationObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.11.1.1 |
tmnxOamPingMaxConcurrentTestsThe maximum number of concurrent active OAM ping tests
that are allowed within an agent implementation. A value of
zero (0) for this object implies that there is no limit for
the number of concurrent active tests in effect.rw Unsigned32 UNITS "tests" .1.3.6.1.4.1.6527.3.1.2.11.1.2 |
tmnxOamPingCtlTableDefines the Alcatel-Lucent SROS OAM ping Control Table for providing,
via SNMP, the capability of performing Alcatel-Lucent SROS OAM ping
test operations. The results of these tests are stored in the
tmnxOamPingResultsTable and the tmnxOamPingHistoryTable. SEQUENCE OF TmnxOamPingCtlEntry .1.3.6.1.4.1.6527.3.1.2.11.1.3 |
tmnxOamPingCtlEntryDefines an entry in the tmnxOamPingCtlTable. The first index
element, tmnxOamPingCtlOwnerIndex, is of type SnmpAdminString,
a textual convention that allows for use of the SNMPv3
View-Based Access Control Model (RFC 2575 [11], VACM)
and allows a management application to identify its entries.
The second index, tmnxOamPingCtlTestIndex, enables the same
management application to have multiple outstanding requests. TmnxOamPingCtlEntry .1.3.6.1.4.1.6527.3.1.2.11.1.3.1 |
tmnxOamPingCtlOwnerIndexTo facilitate the provisioning of access control by a
security administrator using the View-Based Access
Control Model (RFC 2575, VACM) for tables in which
multiple users may need to independently create or
modify entries, the initial index is used as an 'owner
index'. Such an initial index has a syntax of
SnmpAdminString, and can thus be trivially mapped to a
security name or group name as defined in VACM, in
accordance with a security policy.
When used in conjunction with such a security policy all
entries in the table belonging to a particular user (or
group) will have the same value for this initial index.
For a given user's entries in a particular table, the
object identifiers for the information in these entries
will have the same sub identifiers (except for the 'column'
sub identifier) up to the end of the encoded owner index.
To configure VACM to permit access to this portion of the
table, one would create vacmViewTreeFamilyTable entries
with the value of vacmViewTreeFamilySubtree including
the owner index portion, and vacmViewTreeFamilyMask
'wildcarding' the column sub identifier. More elaborate
configurations are possible. SnmpAdminString .1.3.6.1.4.1.6527.3.1.2.11.1.3.1.1 |
tmnxOamPingCtlTestIndexThe test name index of the Alcatel-Lucent SROS OAM ping test.
This is locally unique, within the scope of an
tmnxOamPingCtlOwnerIndex. SnmpAdminString .1.3.6.1.4.1.6527.3.1.2.11.1.3.1.2 |
tmnxOamPingCtlRowStatusThis object allows entries to be created and deleted
in the tmnxOamPingCtlTable. Deletion of an entry in this
table results in all corresponding (same
tmnxOamPingCtlOwnerIndex and tmnxOamPingCtlTestIndex index
values) tmnxOamPingResultsTable and tmnxOamPingHistoryTable
entries being deleted.
Activation of a Alcatel-Lucent SROS OAM ping operation is controlled
via tmnxOamPingCtlAdminStatus and not by changing
this object's value to active(1).
The values for configuration objects required for the type of
test specified in tmnxOamPingCtlTestMode MUST be specified
prior to a transition to active(1) state being
accepted.
Transitions in and out of active(1) state are not allowed while
an entry's tmnxOamPingResultsOperStatus is active(1) with the
exception that deletion of an entry in this table by setting
its RowStatus object to destroy(6) will stop an active Alcatel-Lucent
SROS OAM ping operation.
The operational state of an Alcatel-Lucent SROS OAM ping operation
can be determined by examination of its
tmnxOamPingResultsOperStatus object.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.1.3.1.3 |
tmnxOamPingCtlStorageTypeThe storage type for this conceptual row.
Conceptual rows having the value 'permanent' need not
allow write-access to any columnar objects in the row.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.1.3.1.4 |
tmnxOamPingCtlDescrThe purpose of this object is to provide a
descriptive name of the OAM ping test.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.6527.3.1.2.11.1.3.1.5 |
tmnxOamPingCtlTestModeSpecifies the type of OAM ping test defined by this entry.
The configuration parameters unique to a specific test type are to
be found in an sparsely dependent table extension for that test type.
none - the test type is unspecified.
sdpPing - tests SDP connectivity and round trip time.
mtuPing - tests MTU path size.
svcPing - determines the existence and operative state of the
service ID on the far end ESR.
NOTE: This is a one-shot test.
macQuery - obsolete. Originally specified functionality is as follows.
- determines a specific address mapping for the service ID.
See tmnxOamMacPingCtlTable for additional parameters.
NOTE: This is a one-shot test.
macPing - determines address mappings for the service ID.
See tmnxOamMacPingCtlTable for additional parameters.
macPopulate - populates an OAM MAC address into the FIBs.
See tmnxOamMacPingCtlTable for additional parameters.
NOTE: This is a one-shot test.
macPurge - deletes an OAM MAC address from the FIBs.
See tmnxOamMacPingCtlTable for additional parameters.
NOTE: This is a one-shot test.
lspPing - tests LSP path connectivity and round trip time.
See tmnxOamLspPingCtlTable for additional parameters.
vprnPing - tests IP path connectivity and round trip time within
a specified VPRN service. See tmnxOamVprnPingCtlTable
for additional parameters.
atmPing - tests ATM path connectivity and round trip time on an
ATM VCC. See tmnxOamAtmPingCtlTable for additional
parameters.
mfibPing - tests IP multicast connectivity and round trip time
within a specified VPLS service.
See tmnxOamMfibPingCtlTable for additional parameters.
cpePing - determines IP connectivity to a CPE
within a specified VPLS service.
See tmnxOamCpePingCtlTable for additional parameters.
mrInfo - Get multicast router's capabilities and the list of
interfaces with neighbors.
vccvPing - tests pseudowire connectivity and round trip time.
See tmnxOamVccvPingCtlTable for additional parameters.
icmpPing - tests IP connectivity and round trip time.
See tmnxOamIcmpPingCtlTable for additional parameters.
dnsPing - tests DNS name resolution connectivity and round trip time.
ancpLoopback - send an OAM loopback test request to the access node.
See tmnxOamAncpTestCtlTable for additional parameters.
p2mpLspPing - tests P2MP LSP path connectivity and round trip time.
Test mode cannot be p2mpLspPing if SAA is enabled. See
tmnxOamP2mpLspPingCtlTable for additional parameters.
ethCfmLoopback - performs Ethernet Connectivity Fault Management (CFM)
loopback tests. This MIB supports the SAA form of this
test only (the OAM form uses a separate set of objects - see
IEEE8021-CFM-MIB). Additional parameters for the SAA
ethCfmLoopback test are in tmnxOamEthCfmPingCtlTable.
ethCfmTwoWayDelay - performs Ethernet Connectivity Fault Management
(CFM) two way delay tests. This MIB supports the SAA form
of this test only (the OAM form uses a separate set of
objects - see IEEE8021-CFM-MIB). Additional parameters for
the SAA ethCfmTwoWayDelay test are in
tmnxOamEthCfmPingCtlTable.
mobGtpPing - Tests GTP (GPRS Tunnelling Protocol) path connectivity.
ethCfmTwoWaySlm - performs Ethernet Connectivity Fault Management
(CFM) two way Synthetic Loss Measurement (SLM) tests. This
MIB supports the SAA form of this test only (the OAM form
uses a separate set of objects - see
TIMETRA-IEEE8021-CFM-MIB). Additional parameters for the SAA
ethCfmTwoWaySlm test are in tmnxOamEthCfmPingCtlTable.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.11.1.3.1.6 |
tmnxOamPingCtlAdminStatusReflects the desired state that a tmnxOamPingCtlEntry should be
in:
enabled(1) - Attempt to activate the test as defined by
this tmnxOamPingCtlEntry.
disabled(2) - Deactivate the test as defined by this
tmnxOamPingCtlEntry.
An attempt to set tmnxOamPingCtlAdminStatus to 'enabled' will fail
if the parameters required by a particular OAM ping test mode have
not been previously set. Upon completion of an OAM ping test,
the agent will reset the value of this object to 'disabled'.
When this object has the value 'enabled' an attempt to modify
any of the test parameters will fail with an inconsistentValue
error.
If tmnxOamPingCtlTestMode equals either
'sdpPing' or 'mtuPing', tmnxOamPingCtlOrigSdpId must have already
been set.
If tmnxOamPingCtlTestMode equals 'mtuPing',
tmnxOamPingCtlMtuStartSize and tmnxOamPingCtlMtuEndSize must also
have already been set.
If tmnxOamPingCtlTestMode equals 'svcPing',
tmnxOamPingCtlTgtAddress and tmnxOamPingCtlServiceId must have
already been set.
If tmnxOamPingCtlTestMode equals 'cpePing',
tmnxOamPingCtlTgtAddress, and tmnxOamCpePingCtlSourceIpAddr
are required.
If tmnxOamPingCtlTestMode equals 'icmpPing', tmnxOamPingCtlTgtAddress
must have already been set.
If tmnxOamPingCtlTestMode equals 'dnsPing', tmnxOamPingCtlTgtAddress
must have already been set.
If tmnxOamPingCtlSAA has the value 'true' and tmnxOamSaaCtlAdminStatus
has a value 'outOfService', an attempt to set this object to 'enabled'
will fail with an inconsistentValue error.
Refer to the corresponding tmnxOamPingResultsOperStatus to determine
the operational state of the test defined by this entry.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.11.1.3.1.7 |
tmnxOamPingCtlOrigSdpIdSpecifies the originating SDP-ID to be used for performing
a sdp-ping or mtu-ping operation. This parameter is required
only if tmnxOamPingCtlTestMode has a value of either 'sdpPing'
or 'mtuPing'.
The far-end address of the specified SDP-ID is the expected
responder-id within each OAM reply message received. The
specified SDP-ID defines the encapsulation of the SDP tunnel
encapsulation used to reach the far-end. This can be IP/GRE
or MPLS. The value of tmnxOamPingCtlFcName is used to define
the outgoing forwarding class used for the SDP encapsulation.
If the value of tmnxOamPingCtlOrigSdpId is invalid, or the SDP
is administratively down, or unavailable, the OAM Echo request
message probe is not sent and an appropriate error value is
written to tmnxOamPingHistoryStatus for that probe entry. Once
the interval timer expires, the next probe attempt will be made
if required.rw SdpId (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.11.1.3.1.8 |
tmnxOamPingCtlRespSdpIdSpecifies the return SDP-ID to be used by the far-end node for
its message reply. This parameter is optional and is valid only if
tmnxOamPingCtlTestMode has a value of 'sdpPing'.
If this SDP-ID does not exist on the far-end, terminates on another
node different than the originating node, or some other issue
prevents the far-end from using the specified SDP-ID, the OAM Echo
message reply is sent using generic IP/GRE OAM encapsulation. The
received forwarding class (as mapped on the ingress network interface
for the far-end) defines the forwarding class encapsulation for the
reply message.rw SdpId (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.11.1.3.1.9 |
tmnxOamPingCtlFcNameThe value of tmnxOamPingCtlFcName specifies the forwarding class to be
used when launching the probe(s). The forwarding class name must be
present in the index column of TIMETRA-QOS-MIB::tFCNameTable. This
object is optional.
As shown in the following table
a) this object is applicable to a subset of the test types, and
b) the default forwarding class depends on the test type.
tmnxOamPingCtlTestMode Applicable? Default
-
'cpePing' yes 'be'
'ethCfmLoopback' yes 'nc'
'ethCfmTwoWayDelay' yes 'nc'
ethCfmTwoWaySlm' yes 'nc'
'icmpPing' yes 'nc'
'lspPing' yes 'be'
'macPing' yes 'be'
'p2mpLspPing' yes 'be'
'sdpPing' yes 'be'
'vccvPing' yes 'be'
'vprnPing' yes 'be'
otherwise no N/A
For 'ethCfmLoopback','ethCfmTwoWayDelay', and 'ethCfmTwoWaySlm', the
forwarding class depends on whether the request is configured to egress
on a network port or an access port. In the network port case, the
forwarding class is the forwarding class of the pseudowire. In the
access port case, the forwarding class is that of the SAP's egress
encapsulation policy.
For 'lspPing' this is the forwarding class of the LSP tunnel.
For 'macPing' or 'sdpPing' this is the forwarding class of the SDP
encapsulation.
For 'p2mpLspPing' this is the forwarding class of the P2MP LSP tree.
For 'vccvPing' this is the forwarding class of the pseudowire.
If forwarding classes are mapped by the applicable QoS policy, the
probe(s) may be launched using a different forwarding class than the
forwarding class specified by this object.rw TFCName (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.11.1.3.1.10 |
tmnxOamPingCtlProfileThe value of tmnxOamPingCtlProfile specifies the profile to be used
with the forwarding class specified in tmnxOamPingCtlFcName. This
object is optional.
As shown in the following table
a) this object is applicable to a subset of the test types, and
b) the default profile value depends on the test type.
tmnxOamPingCtlTestMode Applicable? Default
-
'cpePing' yes 'out(2)'
'ethCfmLoopback' yes 'in(1)'
'ethCfmTwoWayDelay' yes 'in(1)'
'ethCfmTwoWaySlm' yes 'in(1)'
'icmpPing' no N/A
'lspPing' yes 'out(2)'
'macPing' yes 'out(2)'
'p2mpLspPing' yes 'out(2)'
'sdpPing' yes 'out(2)'
'vccvPing' yes 'out(2)'
'vprnPing' yes 'out(2)'
otherwise no N/Arw TProfile (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.11.1.3.1.11 |
tmnxOamPingCtlMtuStartSizeThe value of tmnxOamPingCtlMtuStartSize specifies the size of the first
OAM Echo message sent as part of an 'mtuPing' test.
Setting this object to a non-zero value is a prerequisite for starting
an 'mtuPing' test. Its value must be less than or equal to the value
of tmnxOamPingCtlMtuEndSize.
An attempt to set this object from a non-zero value to zero will fail
with a wrongValue error.
Changing the message size is a method of checking the ability of an
SDP to support a particular path-mtu value. The size of the message
does not include the SDP encapsulation, VC-Label (if applied) or any
DLC headers or trailers.rw Unsigned32 (0|40..9198) UNITS "Octets" .1.3.6.1.4.1.6527.3.1.2.11.1.3.1.12 |
tmnxOamPingCtlMtuEndSizeThe value of tmnxOamPingCtlMtuEndSize specifies the size of the last
OAM Echo message sent as part of an 'mtuPing' test.
Setting this object to a non-zero value is a prerequisite for starting
an 'mtuPing' test. Its value must be greater than or equal to
the value of tmnxOamPingCtlMtuStartSize.
An attempt to set this object from a non-zero value to zero will fail
with a wrongValue error.rw Unsigned32 (0|40..9198) UNITS "Octets" .1.3.6.1.4.1.6527.3.1.2.11.1.3.1.13 |
tmnxOamPingCtlMtuStepSizeSpecifies the number of octets by which to increment the
OAM Echo message request size for each message request sent
when tmnxOamPingCtlTestMode is set equal to 'mtuPing'. If the
next incremented message size is greater than
tmnxOamPingCtlMtuEndSize, the last message has already been
sent. The next size message is not sent until a reply is
received or three messages have timed out at the current
size.
This parameter is optional.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.1.3.1.14 |
tmnxOamPingCtlTargetIpAddressSpecifies the Ipv4 address to be used as the destination for
performing an OAM ping operation when tmnxOamPingCtlTestMode has
a value of 'svcPing' or 'vprnPing'. This parameter is
required for 'svcPing', 'vprnPing', 'cpePing' and 'mrinfo'.
This object was obsoleted in release 4.0 and replaced with
InetAddress objects tmnxOamPingCtlTgtAddrType and
tmnxOamPingCtlTgtAddress.rwobsolete IpAddress .1.3.6.1.4.1.6527.3.1.2.11.1.3.1.16 |
tmnxOamPingCtlServiceIdThe value of tmnxOamPingCtlServiceId specifies the service ID of the
service being tested.
The applicability of tmnxOamPingCtlServiceId varies with the test type,
as shown in the following table.
tmnxOamPingCtlTestMode Applicability Related Virtual Router Object
'cpePing' mandatory none
'icmpPing' optional tmnxOamPingCtlVRtrID
'macPing' mandatory none
'macPopulate' mandatory none
'macPurge' mandatory none
'mfibPing' mandatory none
'mrInfo' optional tmnxOamPingCtlVRtrID
'svcPing' mandatory none
'vprnPing' mandatory none
otherwise not applicable none
When tmnxOamPingCtlServiceId is mandatory, a non-zero value must be
provided.
When tmnxOamPingCtlServiceId is optional, it is used to specify a VPRN
service. The test must use the VPRN service's virtual router.
When a related virtual router object is shown, the interaction is
described in the DESCRIPTION clause of the listed object.
Service IDs larger than 2147483647 are internal, so they are excluded
from the range.
The default value is the null service ID.rw TmnxServId .1.3.6.1.4.1.6527.3.1.2.11.1.3.1.17 |
tmnxOamPingCtlLocalSdpWhen the value of tmnxOamPingCtlLocalSdp is 'true', the 'svcPing' test
determines an egress SDP-ID that is bound to the service that has
the far-end IP address specified in tmnxOamPingCtlTgtAddress
assigned to it. The far-end address of the specified SDP-ID is
the expected responder-id within the OAM Echo reply message. The
SDP-ID defines the encapsulation of the SDP tunnel encapsulation
used to reach the far-end. This can be IP/GRE or MPLS. On the
originator egress, the Service-ID must have an associated VC-Label
to reach the far-end address of the SDP-ID and the SDP-ID must be
operational for the message to be sent.
This object is optional and valid only when tmnxOamPingCtlTestMode is
equal to 'svcPing'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.1.3.1.18 |
tmnxOamPingCtlRemoteSdpThe value of tmnxOamPingCtlRemoteSdp specifies the encapsulation of the
ping reply to be sent by the far end node.
When tmnxOamPingCtlRemoteSdp is 'false', the far-end node sends the
reply using the generic IP/GRE OAM encapsulation.
When tmnxOamPingCtlRemoteSdp is 'true', the far-end node sends the
reply using the same service tunnel encapsulation labeling used for the
associated service traffic. If that labeling cannot be found, the
generic IP/GRE OAM encapsulation is used.
This object is optional and is applicable only when
tmnxOamPingCtlTestMode is equal to 'svcPing'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.1.3.1.19 |
tmnxOamPingCtlSizeThe value of tmnxOamPingCtlSize specifies the size of the OAM Echo
message.
This parameter is optional and is valid only if tmnxOamPingCtlTestMode
has a value of 'sdpPing', 'macPing', 'lspPing', 'vprnPing',
'mfibPing', 'vccvPing', 'icmpPing', 'p2mpLspPing', 'ethCfmLoopback' or
'ethCfmTwoWaySlm'.
The minimum, maximum, and default values for the
tmnxOamPingCtlTestMode cases are:
'ethCfmLoopback' : 0, 1500, 0
'ethCfmTwoWaySlm': 0, 1500, 0
'icmpPing' : 0, 16384, 56
'lspPing' : 80, 9198, 80 - LSP prefix specified
: 92, 9198, 92 - LSP name specified
'macPing' : 1, 9198, 72
'mfibPing' : 1, 9198, 72
'p2mpLspPing' : 92|97, 9198, 92 - LSP name, 0 S2L specified
: 104|109, 9198, 104 - LSP name, 1 S2L specified
: 112|117, 9198, 112 - LSP name, 2 S2L specified
: 120|125, 9198, 120 - LSP name, 3 S2L specified
: 128|133, 9198, 128 - LSP name, 4 S2L specified
: 136|141, 9198, 136 - LSP name, 5 S2L specified
: 88|93, 9198, 88 - LDP id, 0 leaf-addr specified
: 100|105, 9198, 100 - LDP id, 1 leaf-addr specified
: 108|113, 9198, 108 - LDP id, 2 leaf-addr specified
: 116|121, 9198, 116 - LDP id, 3 leaf-addr specified
: 124|129, 9198, 124 - LDP id, 4 leaf-addr specified
: 132|137, 9198, 132 - LDP id, 5 leaf-addr specified
: 92|97, 9198, 92 - LDP SSM, 0 leaf-addr specified
: 104|109, 9198, 104 - LDP SSM, 1 leaf-addr specified
: 112|117, 9198, 112 - LDP SSM, 2 leaf-addr specified
: 120|125, 9198, 120 - LDP SSM, 3 leaf-addr specified
: 128|133, 9198, 128 - LDP SSM, 4 leaf-addr specified
: 136|141, 9198, 136 - LDP SSM, 5 leaf-addr specified
'sdpPing' : 72, 9198, 72
'vccvPing' : 88, 9198, 88 - FEC 128 pseudowire
: 120, 9198, 120 - FEC 129 pseudowire
'vprnPing' : 1, 9198, 72
An RSVP-TE P2MP LSP consists of source-to-leaf (S2L) sub-LSPs.
For P2MP LSP ping, a gap in the supported range of tmnxOamPingCtlSize
arises from the inclusion of the Pad TLV (see RFC 4379 section 3.4).
For example, when no S2L sub-LSP is specified for a RSVP P2MP LSP,
the minimum ping size is 92. But the next valid minimum ping size
is 97 due to the inclusion of the Pad TLV.
When the OAM message is encapsulated in an IP/GRE SDP, the
IP 'DF' (Don't Fragment) bit is set. If any segment of the path
between the sender and receiver cannot handle the message size,
the message is discarded. MPLS LSPs are not expected to fragment
the message either, as the message contained in the LSP is not an
IP packet.
When tmnxOamPingCtlTestMode has a value of 'ethCfmLoopback' or
'ethCfmTwoWaySlm', the value of this object specifies the number of
octets in the Value field of the Data TLV of the Ethernet CFM packet.
If zero is specified, the packet has no Data TLV.
When tmnxOamPingCtlTestMode has a value of 'icmpPing', the value
of this object specifies the payload size following the ICMP
header.
Before 6.0 release, the minimum size in 'sdpPing' is 40 octets.
Such shorter packet has no timestamp information but should still
be accepted for interoperability purpose. However, new 'sdpPing'
should include the timestamp information.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.1.3.1.20 |
tmnxOamPingCtlTimeOutThe value of tmnxOamPingCtlTimeOut specifies the time-out value,
in seconds, to be used during a test run.
Timers (with duration configured using the tmnxOamPingCtlTimeOut value)
are used in one of two ways during a test run.
1. Per Probe: a timer is started each time a probe is sent. If the
timer expires before the probe response arrives, the probe is
declared failed. This is the traditional time-out method for a
sequence of probes.
OR
2. Per Test: a timer is started once per test run, when the last
probe of the test run is sent. ANY probe which does not have a
response when the timer expires is declared failed.
SROS chooses 'Per Probe' or 'Per Test' based on the
tmnxOamPingCtlTestMode value. The choice is not configurable.
The accepted minimum, maximum, and default values for
tmnxOamPingCtlTimeOut depend on tmnxOamPingCtlTestMode, as shown in the
following table. The table also shows the timer usage for the test
mode.
tmnxOamPingCtlTestMode Min Max Def Timer Usage
- -
'atmPing' 1 10 5 Per Probe
'dnsPing' 1 120 5 Per Probe
'ethCfmLoopback' 1 10 5 Per Probe
'ethCfmTwoWayDelay' 1 10 5 Per Test
'ethCfmTwoWaySlm' 1 10 5 Per Test
'icmpPing' 1 10 5 Per Test
'lspPing' 1 10 5 Per Probe
'macPing' 1 10 5 Per Probe
'mfibPing' 1 100 5 Per Probe
'mtuPing' 1 10 5 Per Probe
'p2mpLspPing' 1 120 10 Per Probe
'sdpPing' 1 10 5 Per Probe
'vccvPing' 1 10 5 Per Probe
'vprnPing' 1 100 5 Per Probe
otherwise ......... the value of tmnxOamPingCtlTimeOut is irrelevantrw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.1.3.1.21 |
tmnxOamPingCtlProbeCountThe value of tmnxOamPingCtlProbeCount specifies the number of probes to
send during the test.
The maximum probe count depends on the value of tmnxOamPingCtlTestMode,
as follows:
'macPopulate', 'macPurge','p2mpLspPing', 'svcPing' : 1
'ethCfmTwoWayDelay', 'ethCfmTwoWaySlm' : 1000
'icmpPing' : 100000
otherwise : 100
For the following tmnxOamPingCtlTestMode values, the value of
tmnxOamPingCtlProbeCount does not affect the behavior of the test:
'mrInfo', 'mtuPing'.
If tmnxOamPingCtlTestMode is 'icmpPing', the default probe count value
is 5. Otherwise, the DEFVAL applies.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.1.3.1.22 |
tmnxOamPingCtlIntervalThe value of tmnxOamPingCtlInterval specifies the time to wait between
the transmission of one OAM Echo request and the next. The UNITS are
specified by tmnxOamPingCtlIntervalUnits. For example, if
tmnxOamPingCtlInterval has the value 1, and tmnxOamPingCtlIntervalUnits
has the value 'centiseconds(2)', the interval between OAM Echo requests
is 0.01 seconds.
The applicability, range, and default value of the interval specified
using the tmnxOamPingCtlInterval and tmnxOamPingCtlIntervalUnits pair
vary with tmnxOamPingCtlTestMode and tmnxOamIcmpPingCtlRapid, as shown
in the following table.
tmnxOamPingCtlTestMode Supported Values (sec) Default (sec)
'ethCfmLoopback' 1, 2, .. 10 5
'ethCfmTwoWayDelay' 0.1, 0.2, .. 0.9; 1, 2, .. 10 5
'ethCfmTwoWaySlm' 0.1, 0.2, .. 0.9; 1, 2, .. 10 5
'icmpPing' with RAPID 0.01, 0.02, .. 100.00 0.01
'icmpPing' without RAPID 1, 2, .. 10000 1
'p2mpLspPing' not applicable
otherwise 1, 2, .. 10 1rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.1.3.1.23 |
tmnxOamPingCtlMaxRowsThe maximum number of entries allowed in the tmnxOamPingHistoryTable
for this OAM ping test. The agent will remove the oldest entry in
the tmnxOamPingHistoryTable to allow the addition of an new entry
once the number of rows in the tmnxOamPingHistoryTable reaches this
value.
Old entries are not removed when a new test is started. Entries are
added to the tmnxOamPingHistoryTable until tmnxOamPingCtlMaxRows is
reached before entries begin to be removed.
'p2mpLspPing' uses a default value of 400, which is the maximum
number of leaves per P2MP LSP tree.
A value of 0 for this object disables creation of
tmnxOamPingHistoryTable entries.
This object was obsoleted in release 6.0R17.rwobsolete Unsigned32 UNITS "rows" .1.3.6.1.4.1.6527.3.1.2.11.1.3.1.24 |
tmnxOamPingCtlTrapGenerationThe value of tmnxOamPingCtlTrapGeneration specifies the
notification(s) to send for a test run.
Each bit enables the transmission of one notification, as follows.
'probeFailure(0)': send one tmnxOamPingProbeFailedV3 notification if
at least M successive probes failed during the test run. M is
configured using tmnxOamPingCtlTrapProbeFailureFilter.
'testFailure(1)': send one tmnxOamPingTestFailedV3 notification if at
least N probes failed during the test run. N is configured using
tmnxOamPingCtlTrapTestFailureFilter.
'testCompletion(2)': send one tmnxOamPingTestCompletedV3 notification
when the test run is complete.rw Bits .1.3.6.1.4.1.6527.3.1.2.11.1.3.1.25 |
tmnxOamPingCtlTrapProbeFailureFilterThe value of this object is used to determine when
to generate a tmnxOamPingProbeFailed NOTIFICATION.
Setting tmnxOamPingCtlTrapGeneration
to 'probeFailure (0)' implies that a tmnxOamPingProbeFailed
NOTIFICATION is generated only when the number of
successive probe failures, as indicated by the
value of tmnxOamPingCtlTrapProbeFailureFilter, fail within
a given ping test.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.1.3.1.26 |
tmnxOamPingCtlTrapTestFailureFilterThe value of this object is used to determine when
to generate a tmnxOamPingTestFailed NOTIFICATION.
Setting tmnxOamPingCtlTrapGeneration to 'testFailure (1)'
implies that a tmnxOamPingTestFailed NOTIFICATION is
generated only when the number of ping failures
within a test exceed the value of
tmnxOamPingCtlTrapTestFailureFilter.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.1.3.1.27 |
tmnxOamPingCtlSAAThe value of tmnxOamPingCtlSAA specifies if this test is an SAA test
(Service Assurance Agent; 'true'), or an OAM test ('false'). If
there is a tmnxOamSaaCtlTable row with the specified index values,
'true' is returned. Otherwise, 'false' is returned.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.1.3.1.28 |
tmnxOamPingCtlRunsThe value of tmnxOamPingCtlRuns indicates the number of times
this OAM ping test has been executed.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.11.1.3.1.29 |
tmnxOamPingCtlFailuresThe value of tmnxOamPingCtlFailures indicates the number of times
this OAM ping test has failed.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.11.1.3.1.30 |
tmnxOamPingCtlLastRunResultThe value of tmnxOamPingCtlLastRunResult indicates the completion
status the last time this test was executed. If this OAM test is
currently in progress, this object indicates the result of the
previous test run, if any.ro TmnxOamTestResult .1.3.6.1.4.1.6527.3.1.2.11.1.3.1.31 |
tmnxOamPingCtlLastChangedThe value of tmnxOamPingCtlLastChanged indicates the time the
value of a settable object in this row was last changed.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.1.3.1.32 |
tmnxOamPingCtlVRtrIDThe value of tmnxOamPingCtlVRtrID specifies the virtual router to be
used for the test. The value specified must be the index of an active
row in TIMETRA-VRTR-MIB::vRtrConfTable.
This object is applicable if tmnxOamPingCtlTestMode is 'icmpPing' or
'mrInfo'.
When directing an 'icmpPing' or 'mrInfo' test to use a virtual router
associated with a VPRN service, the virtual router can be specified
using tmnxOamPingCtlVRtrID (with the VPRN's virtual router number) or
tmnxOamPingCtlServiceId (with the VPRN's service number).
tmnxOamPingCtlServiceId is preferred, because service numbers are
constant across an SROS reboot (while virtual routers may be
renumbered). If non-default values are specified for both
tmnxOamPingCtlVRtrID and tmnxOamPingCtlServiceId,
tmnxOamPingCtlServiceId is used.
Setting this object is optional.rw TmnxVRtrID (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.11.1.3.1.33 |
tmnxOamPingCtlTgtAddrTypeThe value of tmnxOamPingCtlTgtAddrType specifies the address type of
tmnxOamPingCtlTgtAddress.
Values supported depend on tmnxOamPingCtlTestMode, as follows.
'cpePing ': 'ipv4(1)'
'dnsPing' : 'ipv4(1)' 'ipv6(2)'
'icmpPing': 'ipv4(1)' 'ipv6(2)' 'ipv6z(4)' 'dns(16)'
'mfibPing': 'ipv4(1)' 'ipv6(2)'
'mrInfo ': 'ipv4(1)' 'dns(16)'
'svcPing' : 'ipv4(1)'
'vccvPing': 'unknown(0)' 'ipv4(1)'
'vprnPing': 'ipv4(1)' 'ipv6(2)'
otherwise : 'unknown(0)'rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.11.1.3.1.34 |
tmnxOamPingCtlTgtAddressThe value of tmnxOamPingCtlTgtAddress specifies the destination IP host
address to be used when performing an OAM ping operation. The
corresponding address type is configured using
tmnxOamPingCtlTgtAddrType.
For 'dnsPing' this is the address of the DNS server host that will be
asked to resolve a dns name specified by tmnxOamPingCtlDnsName.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.11.1.3.1.35 |
tmnxOamPingCtlSrcAddrTypeThe value of tmnxOamPingCtlSrcAddrType specifies the address type of
tmnxOamPingCtlSrcAddress.
Only 'ipv4' and 'ipv6' address types are supported.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.11.1.3.1.36 |
tmnxOamPingCtlSrcAddressThe value of tmnxOamPingCtlSrcAddress specifies the source IP host
address to be used when performing an OAM ping operation. The
corresponding address type is configured using
tmnxOamPingCtlSrcAddrType.
This is an optional parameter. It is used when tmnxOamPingCtlTestMode
is 'icmpPing', 'dnsPing', 'lspPing', 'p2mpLspPing' (LDP), or
'vccvPing'.rw InetAddress .1.3.6.1.4.1.6527.3.1.2.11.1.3.1.37 |
tmnxOamPingCtlDnsNameThe value of tmnxOamPingCtlDnsName specifies the DNS name to
be resolved to an IP address.
This object is required for 'dnsPing'.rw OCTET STRING .1.3.6.1.4.1.6527.3.1.2.11.1.3.1.38 |
tmnxOamPingCtlDNSRecordThe value of tmnxOamPingCtlDNSRecord specifies which DNS record
is to be retrieved in this test.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.11.1.3.1.39 |
tmnxOamPingCtlIntervalUnitsThe value of tmnxOamPingCtlIntervalUnits specifies the units for
tmnxOamPingCtlInterval. For example, if tmnxOamPingCtlIntervalUnits
has the value 'centiseconds(2)', and tmnxOamPingCtlInterval has the
value 10, the test's interval is 0.1 seconds.
The supported combinations of tmnxOamPingCtlIntervalUnits,
tmnxOamPingCtlInterval, tmnxOamPingCtlTestMode, and
tmnxOamIcmpPingCtlRapid are specified in the tmnxOamPingCtlInterval
DESCRIPTION clause.
The interaction between this object and tmnxOamIcmpPingCtlRapid is
specified in the tmnxOamIcmpPingCtlRapid DESCRIPTION clause.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.11.1.3.1.40 |
tmnxOamPingResultsTableDefines the OAM Ping Results Table for providing
the capability of performing OAM ping operations. The
results of these operations are stored in the
tmnxOamPingResultsTable and the tmnxOamPingHistoryTable.
An entry is added to the tmnxOamPingResultsTable when an
tmnxOamPingCtlEntry is started by successful transition
of its tmnxOamPingCtlAdminStatus object to enabled(1).
An entry is removed from the tmnxOamPingResultsTable when
its corresponding tmnxOamPingCtlEntry is deleted. SEQUENCE OF TmnxOamPingResultsEntry .1.3.6.1.4.1.6527.3.1.2.11.1.4 |
tmnxOamPingResultsEntryDefines an entry in the tmnxOamPingResultsTable. The
tmnxOamPingResultsTable has the same indexing as the
tmnxOamPingCtlTable in order for a tmnxOamPingResultsEntry to
correspond to the tmnxOamPingCtlEntry that caused it to
be created.
An entry in this table summarizes results from multiple
invocations of the test configured by the corresponding
entry in tmnxOamPingCtlTable. TmnxOamPingResultsEntry .1.3.6.1.4.1.6527.3.1.2.11.1.4.1 |
tmnxOamPingResultsOperStatusReflects the operational state of a tmnxOamPingCtlEntry:
enabled(1) - Test is active.
disabled(2) - Test has stopped.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.11.1.4.1.1 |
tmnxOamPingResultsMinRttThe minimum OAM ping round-trip-time (RTT) received.
This value is relevant when tmnxOamPingCtlTestMode has a value of
'sdpPing', 'ethCfmLoopback', 'ethCfmTwoWayDelay', or 'ethCfmTwoWaySlm'.
Otherwise, this object contains a value of 0.ro Unsigned32 UNITS "microseconds" .1.3.6.1.4.1.6527.3.1.2.11.1.4.1.4 |
tmnxOamPingResultsMaxRttThe maximum OAM ping round-trip-time (RTT) received.
A value of 0 for this object implies that no RTT has been received.
This value is relevant when tmnxOamPingCtlTestMode has a value of
'sdpPing', 'ethCfmLoopback', 'ethCfmTwoWayDelay', or 'ethCfmTwoWaySlm'.
Otherwise, this object contains a value of 0.ro Unsigned32 UNITS "microseconds" .1.3.6.1.4.1.6527.3.1.2.11.1.4.1.5 |
tmnxOamPingResultsAverageRttThe current average OAM ping round-trip-time (RTT).
This value is relevant when tmnxOamPingCtlTestMode has a value of
'sdpPing', 'ethCfmLoopback', 'ethCfmTwoWayDelay', or 'ethCfmTwoWaySlm'.
Otherwise, this object contains a value of 0.ro Unsigned32 UNITS "microseconds" .1.3.6.1.4.1.6527.3.1.2.11.1.4.1.6 |
tmnxOamPingResultsRttSumOfSquaresThe value of tmnxOamPingResultsRttSumOfSquares indicates the least
significant 32 bits of tmnxOamPingResultsRttHCSumSquares.ro Unsigned32 UNITS "microseconds squared" .1.3.6.1.4.1.6527.3.1.2.11.1.4.1.7 |
tmnxOamPingResultsMtuResponseSizeThis object contains the largest size OAM Echo request message
that received a valid reply.
The value of this object MUST be reported as 0 when no ping responses
have been received or an active test has not yet timed out. When
tmnxOamPingCtlTestMode does not have a value of 'mtuPing', this object
is not relevant and should contain a value of 0.ro Unsigned32 UNITS "Octets" .1.3.6.1.4.1.6527.3.1.2.11.1.4.1.8 |
tmnxOamPingResultsSvcPingThe object contains the final results of an OAM 'svcPing' test.
The value of this object MUST be reported as 0 when no ping responses
have been received or an active test has not yet timed out. When
tmnxOamPingCtlTestMode does not have a value of 'svcPing', this object
is not relevant and should contain a value of 0.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.11.1.4.1.9 |
tmnxOamPingResultsProbeResponsesNumber of responses received for the corresponding
tmnxOamPingCtlEntry and tmnxOamPingResultsEntry. The value of
this object MUST be reported as 0 when no probe responses have
been received.ro Unsigned32 UNITS "responses" .1.3.6.1.4.1.6527.3.1.2.11.1.4.1.10 |
tmnxOamPingResultsSentProbesThe value of this object reflects the number of probes sent
for the corresponding tmnxOamPingCtlEntry and tmnxOamPingResultsEntry.
The value of this object MUST be reported as 0 when no probes
have been sent.ro Unsigned32 UNITS "probes" .1.3.6.1.4.1.6527.3.1.2.11.1.4.1.11 |
tmnxOamPingResultsLastGoodProbeDate and time when the last response was received for
an OAM probe. If a response has not been received,
'1970-1-1,0:0:0.0,+0:0' is returned.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.1.4.1.12 |
tmnxOamPingResultsLastRespHeaderA copy of the OAM header of the last response packet received for
this OAM ping test. The value of this object MUST be reported
as 0 when no probes have been sent.
This object was obsoleted in release 8.0R1 and replaced with
tmnxOamPingHistoryRespHdr in tmnxOamPingHistoryTable.roobsolete OCTET STRING .1.3.6.1.4.1.6527.3.1.2.11.1.4.1.13 |
tmnxOamPingResultsMinTtThe minimum OAM ping outbound one-way trip time received.
A value of 0 for this object implies that no one-way trip time
measurement is available.ro Integer32 UNITS "microseconds" .1.3.6.1.4.1.6527.3.1.2.11.1.4.1.14 |
tmnxOamPingResultsMaxTtThe maximum OAM ping outbound one-way trip time received.
A value of 0 for this object implies that no one-way trip time
measurement is available.ro Integer32 UNITS "microseconds" .1.3.6.1.4.1.6527.3.1.2.11.1.4.1.15 |
tmnxOamPingResultsAverageTtThe current average OAM ping outbound one-way trip time.
A value of 0 for this object implies that no one-way trip time
measurement is available.ro Integer32 UNITS "microseconds" .1.3.6.1.4.1.6527.3.1.2.11.1.4.1.16 |
tmnxOamPingResultsTtSumOfSquaresThe value of tmnxOamPingResultsTtSumOfSquares indicates the least
significant 32 bits of tmnxOamPingResultsTtHCSumSquares.ro Unsigned32 UNITS "microseconds squared" .1.3.6.1.4.1.6527.3.1.2.11.1.4.1.17 |
tmnxOamPingResultsMinInTtThe minimum OAM ping inbound one-way trip time received.
A value of 0 for this object implies that no one-way trip time
measurement is available.ro Integer32 UNITS "microseconds" .1.3.6.1.4.1.6527.3.1.2.11.1.4.1.18 |
tmnxOamPingResultsMaxInTtThe maximum OAM ping inbound one-way trip time received.
A value of 0 for this object implies that no one-way trip time
measurement is available.ro Integer32 UNITS "microseconds" .1.3.6.1.4.1.6527.3.1.2.11.1.4.1.19 |
tmnxOamPingResultsAverageInTtThe current average OAM ping inbound one-way trip time.
A value of 0 for this object implies that no one-way trip time
measurement is available.ro Integer32 UNITS "microseconds" .1.3.6.1.4.1.6527.3.1.2.11.1.4.1.20 |
tmnxOamPingResultsInTtSumOfSqrsThe value of tmnxOamPingResultsInTtSumOfSqrs indicates the least
significant 32 bits of tmnxOamPingResultsInTtHCSumSqrs.ro Unsigned32 UNITS "microseconds squared" .1.3.6.1.4.1.6527.3.1.2.11.1.4.1.21 |
tmnxOamPingResultsOutJitterThe value of tmnxOamPingResultsOutJitter indicates the
amount of one-way trip jitter, expressed in microseconds, for a
ping probe request packet sent for this OAM test.
A value of 0 for this object implies that no one-way trip jitter
measurement is available.ro Integer32 UNITS "microseconds" .1.3.6.1.4.1.6527.3.1.2.11.1.4.1.22 |
tmnxOamPingResultsInJitterThe value of tmnxOamPingResultsInJitter indicates the
amount of one-way trip jitter, expressed in microseconds, for a
ping probe response packet received for this OAM test.
A value of 0 for this object implies that no one-way trip jitter
measurement is available.ro Integer32 UNITS "microseconds" .1.3.6.1.4.1.6527.3.1.2.11.1.4.1.23 |
tmnxOamPingResultsRtJitterThe value of tmnxOamPingResultsRtJitter indicates the
amount of two-way trip jitter, expressed in microseconds, for a
ping probe sent for this OAM test.
A value of 0 for this object implies that no two-way-trip jitter
measurement is available.ro Integer32 UNITS "microseconds" .1.3.6.1.4.1.6527.3.1.2.11.1.4.1.24 |
tmnxOamPingResultsProbeTimeoutsThe value of tmnxOamPingResultsProbeTimeouts indicates the number
of probes timed out without receiving a response.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.1.4.1.25 |
tmnxOamPingResultsProbeFailuresThe value of tmnxOamPingResultsProbeFailures indicates the total
number of probes that failed to be transmitted plus the number of
probes that timed out without receiving a response.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.1.4.1.26 |
tmnxOamPingResultsTestRunIndexThe value of tmnxOamPingResultsTestRunIndex identifies the
row entry that reports results for a single OAM test run.
The agent starts assigning tmnxOamPingResultsTestRunIndex values
at 1 and wraps after exceeding the maximum possible value as
defined by the limit of this object. Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.1.4.1.27 |
tmnxOamPingResultsRttOFSumSquaresThe value of tmnxOamPingResultsRttOFSumSquares indicates the number of
times tmnxOamPingResultsRttSumOfSquares overflowed.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.11.1.4.1.28 |
tmnxOamPingResultsRttHCSumSquaresThe value of tmnxOamPingResultsRttHCSumSquares indicates the sum of
squares of the round trip times of the ping test. Its purpose is to
enable the standard deviation calculation.
The value of this object will be reported as 0 when one or more of the
following conditions apply:
1. No round trip time measurement is available.
2. The test stopped before completion.
3. The test type (i.e. tmnxOamPingCtlTestMode) is one of the
following:
'ancpLoopback',
'atmPing',
'macPopulate',
'macPurge',
'mfibPing',
'mrInfo',
'mtuPing',
'p2mpLspPing',
'svcPing.ro Counter64 UNITS "microseconds squared" .1.3.6.1.4.1.6527.3.1.2.11.1.4.1.29 |
tmnxOamPingResultsTtOFSumSquaresThe value of tmnxOamPingResultsTtOFSumSquares indicates the number of
times tmnxOamPingResultsTtSumOfSquares overflowed.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.11.1.4.1.30 |
tmnxOamPingResultsTtHCSumSquaresThe value of tmnxOamPingResultsTtHCSumSquares indicates the sum of
squares of the outbound one-way trip times of the ping test. Its
purpose is to enable the standard deviation calculation.
The value of this object will be reported as 0 when one or more of the
following conditions apply:
1. No outbound one-way trip time measurement is available.
2. The test stopped before completion.
3. The test type (i.e. tmnxOamPingCtlTestMode) is one of the
following:
'ancpLoopback',
'atmPing',
'cpePing' (sum of squares supported for round trip, not outbound),
'dnsPing' (sum of squares supported for round trip, not outbound),
'macPopulate',
'macPurge',
'mfibPing',
'mrInfo',
'mtuPing',
'p2mpLspPing',
'svcPing.ro Counter64 UNITS "microseconds squared" .1.3.6.1.4.1.6527.3.1.2.11.1.4.1.31 |
tmnxOamPingResultsInTtOFSumSqrsThe value of tmnxOamPingResultsInTtOFSumSqrs indicates the number of
times tmnxOamPingResultsInTtSumOfSqrs overflowed.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.11.1.4.1.32 |
tmnxOamPingResultsInTtHCSumSqrsThe value of tmnxOamPingResultsInTtHCSumSqrs indicates the sum of
squares of the inbound one-way trip times of the ping test. Its
purpose is to enable the standard deviation calculation.
The value of this object will be reported as 0 when one or more of the
following conditions apply:
1. No inbound one-way trip time measurement is available.
2. The test stopped before completion.
3. The test type (i.e. tmnxOamPingCtlTestMode) is one of the
following:
'ancpLoopback',
'atmPing',
'cpePing' (sum of squares supported for round trip, not inbound),
'dnsPing' (sum of squares supported for round trip, not inbound),
'macPopulate',
'macPurge',
'mfibPing',
'mrInfo',
'mtuPing',
'p2mpLspPing',
'svcPing.ro Counter64 UNITS "microseconds squared" .1.3.6.1.4.1.6527.3.1.2.11.1.4.1.33 |
tmnxOamPingResultsTestRunResultThe object contains the overall state of the ping test.ro TmnxOamTestResult .1.3.6.1.4.1.6527.3.1.2.11.1.4.1.34 |
tmnxOamPingHistoryTableDefines a table for storing the results of an OAM ping
probe operation. The probe results for all OAM ping test types
are saved in this table except for 'macPing'. The 'macPing'
results are saved in the tmnxOamMacPingHistoryTable.
For a configured test, this table will hold the results for
up to 3 runs.
An entry in this table is created when the result of an OAM ping
probe is determined. An entry is removed from this table when
its corresponding tmnxOamPingCtlEntry is deleted. SEQUENCE OF TmnxOamPingHistoryEntry .1.3.6.1.4.1.6527.3.1.2.11.1.5 |
tmnxOamPingHistoryEntryDefines an entry in the tmnxOamPingHistoryTable.
The first two index elements identify the tmnxOamPingCtlEntry
that a tmnxOamPingHistoryEntry belongs to. The third index
identifies a specific OAM test run. The fourth index
element selects a single OAM probe result. TmnxOamPingHistoryEntry .1.3.6.1.4.1.6527.3.1.2.11.1.5.1 |
tmnxOamPingHistoryIndexAn entry in this table is created when the result of
a OAM ping probe is determined. The initial 2 instance
identifier index values identify the tmnxOamPingCtlEntry
that a OAM probe result (tmnxOamPingHistoryEntry) belongs
to. The tmnxOamPingHistoryIndex element selects a single OAM
probe result.
The agent starts assigning tmnxOamPingHistoryIndex values at 1
and wraps after exceeding the maximum possible value as defined by
the limit of this object. Unsigned32 (1..'ffffffff'h) SYNTAX Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.1.5.1.1 |
tmnxOamPingHistoryResponseThe amount of time measured in microseconds from when
a OAM probe was sent to when its response was received or
when it timed out. The value of this object is reported
as 0 when it is not possible to transmit an OAM probe.ro Unsigned32 UNITS "microseconds" .1.3.6.1.4.1.6527.3.1.2.11.1.5.1.2 |
tmnxOamPingHistoryOneWayTimeThe amount of time measured in microseconds from when
a OAM probe was sent to when it was received by the replier.
The value of this object is reported as 0 when it is not possible
to transmit an OAM probe or the information is not available.ro Integer32 UNITS "microseconds" .1.3.6.1.4.1.6527.3.1.2.11.1.5.1.3 |
tmnxOamPingHistorySizeThe value of tmnxOamPingHistorySize indicates the size of the OAM echo
request transmitted for this OAM probe. Zero is returned if no probe
has been transmitted.
When tmnxOamPingCtlTestMode is 'ethCfmLoopback', 'ethCfmTwoWayDelay',
or 'ethCfmTwoWaySlm' the size of the trasmitted layer 2 frame
(including the layer 2 header) is returned.
For other tmnxOamPingCtlTestMode values, the size returned is the
tmnxOamPingCtlSize value.ro Unsigned32 UNITS "octets" .1.3.6.1.4.1.6527.3.1.2.11.1.5.1.4 |
tmnxOamPingHistoryStatusThe result of a particular OAM test probe.ro TmnxOamResponseStatus .1.3.6.1.4.1.6527.3.1.2.11.1.5.1.5 |
tmnxOamPingHistoryTimeTime stamp for when this OAM probe result was determined.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.1.5.1.6 |
tmnxOamPingHistoryReturnCodeThe value of tmnxOamPingHistoryReturnCode is an enumerated integer
that indicates the OAM return code received in the OAM ping response.ro TmnxOamPingRtnCode .1.3.6.1.4.1.6527.3.1.2.11.1.5.1.7 |
tmnxOamPingHistorySrcIpAddressSpecifies the Ipv4 address of the remote node that generated this
reply to a OAM probe.
This object was obsoleted in release 4.0 and replaced with
InetAddress objects tmnxOamPingHistorySrcAddrType and
tmnxOamPingHistorySrcAddress.roobsolete IpAddress .1.3.6.1.4.1.6527.3.1.2.11.1.5.1.8 |
tmnxOamPingHistAddressTypeThe value of tmnxOamPingHistAddressType specifies the type of
binding address information returned in response to a 'vprnPing'
'mfibPing', or 'cpePing' test.ro TmnxOamAddressType .1.3.6.1.4.1.6527.3.1.2.11.1.5.1.9 |
tmnxOamPingHistSapIdThe value of tmnxOamPingHistSapId is the name of the access
port of the SAP supporting the requests returned in
response to a 'vprnPing', 'mfibPing' or 'cpePing' probe.
If the value of tmnxOamPingHistAddressType is not 'sapId',
this object is not relevant and MUST have a null string ''.ro TmnxStrSapId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.11.1.5.1.10 |
tmnxOamPingHistoryVersionThe value of tmnxOamPingHistoryVersion indicates the protocol
version for this OAM ping probe reply.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.1.5.1.12 |
tmnxOamPingHistoryCpeMacAddrtmnxOamPingHistoryCpeMacAddr is set to 0 except in case of
a 'cpePing', where it contains the mac address of the replying
CPE for this OAM ping probe reply.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.1.5.1.13 |
tmnxOamPingHistoryRespSvcIdThe value tmnxOamPingHistoryRespSvcId indicates for an 'mfibPing'
the service id to which the SAP responding to the 'mfibPing' probe
belongs. If the indicated SAP is part of the same service originating
the probe, this value is set to 0.
For other types of probes, this value is insignificant and is also
set to 0.ro TmnxServId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.11.1.5.1.14 |
tmnxOamPingHistorySequenceThe value tmnxOamPingHistorySequence indicates this probe's
sequence number. If a probe response was received, this object
indicates the sequence number of the response.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.1.5.1.15 |
tmnxOamPingHistoryIfIndexThe value of tmnxOamPingHistoryIfIndex indicates the ifIndex of the
interface that this probe was transmitted from.
This object applies to 'lspPing' and 'vccvPing' tests. For other test
modes, this value is not significant and is set to 0.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.6527.3.1.2.11.1.5.1.16 |
tmnxOamPingHistoryDataLenThe value of tmnxOamPingHistoryDataLen indicates for an 'lspPing'
the UDP data length of the echo reply, and for 'icmpPing' normally
the length starting after the IP header of the echo reply. For
'ethCfmLoopback' and 'ethCfmTwoWaySlm' the value is the number of
octets in the Value field of the Data TLV of the Ethernet CFM loopback
packet (zero if the packet has no Data TLV).
For other types of probes, this value is not significant and is
set to 0.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.1.5.1.17 |
tmnxOamPingHistoryRespPlaneThe value of tmnxOamPingHistoryRespPlane indicates the
response plane from which this ping response was received.ro TmnxOamTestResponsePlane .1.3.6.1.4.1.6527.3.1.2.11.1.5.1.18 |
tmnxOamPingHistoryReqHdrThe value of tmnxOamPingHistoryReqHdr is a copy of the OAM header of
the request packet sent for this OAM ping test probe.
The request header is reported only when tmnxOamPingCtlTestMode has a
value of 'svcPing', 'sdpPing' 'mtuPing', 'ethCfmLoopback',
'ethCfmTwoWayDelay', or 'ethCfmTwoWaySlm'. Otherwise, a zero length
OCTET STRING is returned.
This object was marked obsolete in SROS release 10.0 R1.roobsolete OCTET STRING .1.3.6.1.4.1.6527.3.1.2.11.1.5.1.19 |
tmnxOamPingHistoryRespHdrThe value of tmnxOamPingHistoryRespHdr is a copy of the OAM
header of the response packet received for this OAM ping test probe.
The response header is reported only when tmnxOamPingCtlTestMode
has a value of 'svcPing', 'sdpPing', 'mtuPing', 'icmpPing',
'ethCfmLoopback', 'ethCfmTwoWayDelay', or 'ethCfmTwoWaySlm'.
Otherwise, a zero length OCTET STRING is returned. For 'icmpPing'
the value reported is the received ICMP message starting from the IP
header.
The value of this object MUST be reported as a zero length
OCTET STRING when no probe response has been received.ro OCTET STRING .1.3.6.1.4.1.6527.3.1.2.11.1.5.1.20 |
tmnxOamPingHistoryDnsAddrTypeThe value of tmnxOamPingHistoryDnsAddrType indicates the
Internet address type stored in tmnxOamPingHistoryDnsAddress.
If this was not a 'dnsPing' test or the dns name specified
in tmnxOamPingCtlDnsName could not be resolved, the value of
this object will be reported as 'unknown'.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.11.1.5.1.21 |
tmnxOamPingHistoryDnsAddressThe value of tmnxOamPingHistoryDnsAddress indicates the
Internet address that was resolved from the name specified
in tmnxOamPingCtlDnsName by a 'dnsPing' test.
If this was not a 'dnsPing' test or the dns name specified
in tmnxOamPingCtlDnsName could not be resolved, the value of
this object will be reported as ''H (empty string).ro InetAddress .1.3.6.1.4.1.6527.3.1.2.11.1.5.1.22 |
tmnxOamPingHistorySrcAddrTypeThe value of tmnxOamPingHistorySrcAddrType indicates the Internet
address type of the address stored in tmnxOamPingHistorySrcAddress.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.11.1.5.1.23 |
tmnxOamPingHistorySrcAddressThe value of tmnxOamPingHistorySrcAddress indicates the Internet
address of the remote node that generated this reply to a OAM probe.ro InetAddress .1.3.6.1.4.1.6527.3.1.2.11.1.5.1.24 |
tmnxOamPingHistoryInOneWayTimeThe value of tmnxOamPingHistoryInOneWayTime indicates the amount
of time measured in microseconds from when an OAM probe reply was
sent to when it was received by this host (in-bound one-way time).
The value of this object is reported as 0 when the information is
not available.ro Integer32 UNITS "microseconds" .1.3.6.1.4.1.6527.3.1.2.11.1.5.1.25 |
tmnxOamPingHistoryLspNameThe value of tmnxOamPingHistoryLspName indicates the name of the LSP
that this probe was transmitted on.
The empty string is returned when the test mode is not 'vccvPing'.
The empty string is returned when the transport tunnel is not RSVP.ro TLNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.11.1.5.1.26 |
tmnxOamPingHistNextHopAddrTypeThe value of tmnxOamPingHistNextHopAddrType indicates the Internet
address type of the address stored in tmnxOamPingHistNextHopAddress.
The value 'unknown(0)' is returned when the test mode is not
'vccvPing'.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.11.1.5.1.27 |
tmnxOamPingHistNextHopAddressThe value of tmnxOamPingHistNextHopAddress indicates the next hop
Internet address that this probe was transmitted to.
The empty string is returned when the test mode is not 'vccvPing'.ro InetAddress .1.3.6.1.4.1.6527.3.1.2.11.1.5.1.28 |
tmnxOamPingHistorySrcGlobalIdThe value of tmnxOamPingHistorySrcGlobalId indicates the source MPLS-TP
global identifier of the replying node. The value is copied from the
reply's RFC 6426 Source Identifier TLV. If the TLV is absent, zero is
returned.
This value is relevant when tmnxOamPingCtlTestMode is 'lspPing' or
'vccvPing'. Otherwise, zero is returned.ro TmnxMplsTpGlobalID .1.3.6.1.4.1.6527.3.1.2.11.1.5.1.29 |
tmnxOamPingHistorySrcNodeIdThe value of tmnxOamPingHistorySrcNodeId indicates the source MPLS-TP
node identifier of the replying node. The value is copied from the
reply's RFC 6426 Source Identifier TLV. If the TLV is absent, zero is
returned.
This value is relevant when tmnxOamPingCtlTestMode is 'lspPing' or
'vccvPing'. Otherwise, zero is returned.ro TmnxMplsTpNodeID .1.3.6.1.4.1.6527.3.1.2.11.1.5.1.30 |
tmnxOamPingHistorySdpBindIdThe value of tmnxOamPingHistorySdpBindId indicates the SDP binding
provided by the remote system.
The value of tmnxOamPingHistorySdpBindId is relevant when
tmnxOamPingHistAddressType is 'sdpBindId(9)'.ro TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.11.1.5.1.31 |
tmnxOamPingHistoryRtrnSubcodeThe value of tmnxOamPingHistoryRtrnSubcode indicates the value present
in an MPLS echo reply's RFC 4379 Return Subcode (RSC) field.
A valid value is returned when the test has a tmnxOamPingCtlTestMode
value of 'lspPing'. Otherwise, zero is returned.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.1.5.1.32 |
tmnxOamMacPingCtlTableDefines the Alcatel-Lucent SROS OAM MAC Ping Control Table for
providing, via SNMP, the capability of performing Alcatel-Lucent SROS
OAM 'macPing', 'macPopulate', or 'macPurge' test operations.
The results of these tests are stored in the tmnxOamPingResultsTable
and the tmnxOamMacPingHistoryTable. There will be no entries for
these test in the tmnxOamPingHistoryTable. SEQUENCE OF TmnxOamMacPingCtlEntry .1.3.6.1.4.1.6527.3.1.2.11.1.6 |
tmnxOamMacPingCtlEntryDefines an entry in the tmnxOamMacPingCtlTable. The first index
element, tmnxOamPingCtlOwnerIndex, is of type SnmpAdminString,
a textual convention that allows for use of the SNMPv3
View-Based Access Control Model (RFC 2575 [11], VACM)
and allows a management application to identify its entries.
The second index, tmnxOamPingCtlTestIndex, enables the same
management application to have multiple outstanding requests. TmnxOamMacPingCtlEntry .1.3.6.1.4.1.6527.3.1.2.11.1.6.1 |
tmnxOamMacPingCtlTargetMacAddrThe value of tmnxOamMacPingCtlTargetMacAddr is a 6-octet value
that specifies the target MAC address to be used in the query
request for performing an OAM ping operation.
This parameter is required.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.1.6.1.1 |
tmnxOamMacPingCtlSourceMacAddrThe value of tmnxOamMacPingCtlSourceMacAddr is a 6-octet value
that specifies the MAC address to be used as the source in the
query request for performing an OAM ping operation. This object
is optional and is not relevant when tmnxOamPingCtlTestMode has a
value other than 'macPing'.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.1.6.1.2 |
tmnxOamMacPingCtlSendControlWhen the value of tmnxOamMacPingCtlSendControl is 'true', the OAM
ping packet is sent directly to the destination IP address via the
control plane. If its value is 'false', the packet is sent via the
data plane.
This object is optional and is not relevant when
tmnxOamPingCtlTestMode has a value other than 'macPopulate',
'macPurge' or 'macPing'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.1.6.1.3 |
tmnxOamMacPingCtlReplyControlWhen the value of tmnxOamMacPingCtlReplyControl is 'true', the
OAM ping response is returned using the control plane. If its
value is 'false', the packet is sent via the data plane. This
object is optional and is not relevant when tmnxOamPingCtlTestMode
has a value other than 'macPing'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.1.6.1.4 |
tmnxOamMacPingCtlTtlSpecifies the vc-label time-to-live value.
This object is optional and is not relevant when
tmnxOamPingCtlTestMode has a value other than 'macPing'.
While performing the test with a ttl of 1 no responses should ever be
expected.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.1.6.1.5 |
tmnxOamMacPingCtlRegisterWhen the value of tmnxOamMacPingCtlRegister is 'true', the
OAM ping request is transmitted that causes each upstream node
to delete the MAC address only from its forwarding plane but
keep it in its control plane in order to inhibit dynamic learning.
If its value is 'false', the MAC address is deleted from both
the forwarding and control planes.
This object is optional and is not relevant when
tmnxOamPingCtlTestMode has a value other than 'macPurge'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.1.6.1.6 |
tmnxOamMacPingCtlFloodWhen the value of tmnxOamMacPingCtlFlood is 'true', the
OAM ping request is transmitted that causes each upstream node
to add or delete the MAC address. If its value is 'false', the
operation is performed locally.
This object is optional and is not relevant when
tmnxOamPingCtlTestMode has a value other than 'macPopulate' or
'macPurge'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.1.6.1.7 |
tmnxOamMacPingCtlForceWhen the value of tmnxOamMacPingCtlForce is 'true', the
MAC type in the FIB is forced to be labeled OAM type if it already
existed as dynamic or static.
This object is optional and is not relevant when
tmnxOamPingCtlTestMode has a value other than 'macPopulate'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.1.6.1.8 |
tmnxOamMacPingCtlAgeThe value of tmnxOamMacPingCtlAge specifies the number of seconds
to age this OAM MAC address in the FIB.
This object is optional and is not relevant when
tmnxOamPingCtlTestMode has a value other than 'macPopulate'.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.1.6.1.9 |
tmnxOamMacPingCtlSapPortIdThe value of tmnxOamMacPingCtlSapPortId is the ID of the access
port of the target SAP.
This object is optional and is not relevant when
tmnxOamPingCtlTestMode has a value other than 'macPopulate'.rw TmnxPortID (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.11.1.6.1.10 |
tmnxOamMacPingCtlSapEncapValueThe value of tmnxOamMacPingCtlSapEncapValue is the label used to
identify the target SAP on the port specified in
tmnxOamMacPingCtlSapPortId.
This object is optional and is not relevant when
tmnxOamPingCtlTestMode has a value other than 'macPopulate'.rw TmnxEncapVal (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.11.1.6.1.11 |
tmnxOamMacPingCtlFibEntryNameThe value of tmnxOamMacPingCtlFibEntryName is the fib entry name
to associate with the target MAC address.
This object is optional and is not relevant when
tmnxOamPingCtlTestMode has a value other than 'macPopulate'.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.11.1.6.1.12 |
tmnxOamMacPingHistoryTableDefines a table for storing the results of an OAM 'macPing' probe
operation. The number of entries in this table for a test
is limited to the results of 3 runs.
An entry in this table is created when the result of an OAM 'macPing'
probe is determined. An entry is removed from this table when its
corresponding tmnxOamPingCtlEntry is deleted. SEQUENCE OF TmnxOamMacPingHistoryEntry .1.3.6.1.4.1.6527.3.1.2.11.1.7 |
tmnxOamMacPingHistoryEntryDefines an entry in the tmnxOamPingHistoryTable. The first two
index elements identify the tmnxOamPingCtlEntry that a
tmnxOamMacPingHistoryEntry belongs to. The third index identifies
a specific run of the OAM test. The fourth index element
selects the group of responses associated with a specific probe
attempt. The fifth index selects a single OAM 'macPing' reply. TmnxOamMacPingHistoryEntry .1.3.6.1.4.1.6527.3.1.2.11.1.7.1 |
tmnxOamMacPingHistoryIndexAn entry in this table is created when the result of a OAM
'macPing' probe is determined. The initial 2 instance identifier
index values identify the tmnxOamPingCtlEntry that a OAM probe
result (tmnxOamMacPingHistoryEntry) belongs to. The
tmnxOamMacPingHistoryIndex has the value of the sequence number
of the request probe and identifies a group of replies received
in response to a specific probe transmission.
The agent starts assigning tmnxOamMacPingHistoryIndex values at 1
and wraps after exceeding the maximum possible value as defined by
the limit of this object. Unsigned32 (1..'ffffffff'h) SYNTAX Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.1.7.1.1 |
tmnxOamMacPingReplyIndexThe tmnxOamMacPingReplyIndex is unique within a group of responses
received as the result of a OAM 'macPing' probe as specified by
having the same value for tmnxOamMacPingHistoryIndex.
The agent starts assigning tmnxOamMacPingReplyIndex values at 1
and wraps after exceeding the maximum possible value as defined by
the limit of this object. Unsigned32 (1..'ffffffff'h) SYNTAX Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.1.7.1.2 |
tmnxOamMacPingHistoryResponseThe amount of time measured in microseconds from when
a OAM probe was sent to when its response was received or
when it timed out. The value of this object is reported
as 0 when it is not possible to transmit an OAM probe.ro Unsigned32 UNITS "microseconds" .1.3.6.1.4.1.6527.3.1.2.11.1.7.1.3 |
tmnxOamMacPingHistoryOneWayTimeThe amount of time measured in microseconds from when an
OAM probe was sent to when it was received by the replier
(out-bound one-way time). The value of this object is
reported as 0 when it is not possible to transmit an OAM
probe or the information is not available.ro Integer32 UNITS "microseconds" .1.3.6.1.4.1.6527.3.1.2.11.1.7.1.4 |
tmnxOamMacPingHistoryStatusThe value of tmnxOamMacPingHistoryStatus is an enumerated integer
that indicates the result of a particular OAM probe.ro TmnxOamResponseStatus .1.3.6.1.4.1.6527.3.1.2.11.1.7.1.5 |
tmnxOamMacPingHistoryTimeTimestamp for when this OAM probe result was determined.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.1.7.1.6 |
tmnxOamMacPingHistoryReturnCodeThe value of tmnxOamMacPingHistoryReturnCode is an enumerated integer
that indicates the return code received in the OAM ping response.ro TmnxOamPingRtnCode .1.3.6.1.4.1.6527.3.1.2.11.1.7.1.7 |
tmnxOamMacPingHistorySrcIpAddressThe value of tmnxOamMacPingHistorySrcIpAddress specifies the Ipv4
address of the remote node that generated this reply to a OAM probe.
This object was obsoleted in release 4.0 and replaced with
InetAddress objects tmnxOamMacPingHistorySrcAddrType and
tmnxOamMacPingHistorySrcAddress.roobsolete IpAddress .1.3.6.1.4.1.6527.3.1.2.11.1.7.1.8 |
tmnxOamMacPingHistoryAddressTypeThe value of tmnxOamMacPingHistoryAddressType specifies the type of
binding address information returned in response to a 'macPing' test.ro TmnxOamAddressType .1.3.6.1.4.1.6527.3.1.2.11.1.7.1.9 |
tmnxOamMacPingHistorySapIdThe value of tmnxOamMacPingHistorySapId is the name of the access
port of the SAP supporting the requested MAC address returned in
response to a 'macPing' probe.
If the value of tmnxOamMacPingHistoryAddressType is not 'sapId',
this object is not relevant and MUST have a null string ''.ro TmnxStrSapId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.11.1.7.1.10 |
tmnxOamMacPingHistorySdpIdThe value of tmnxOamMacPingHistorySdpId is the ID of the SDP
supporting the requested MAC address returned in response to a
'macPing' probe.
If the value of tmnxOamMacPingHistoryAddressType is not 'sdpId',
this object is not relevant and MUST return a value of '0'.ro SdpId (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.11.1.7.1.12 |
tmnxOamMacPingHistoryAdminStatusThe value of tmnxOamMacPingHistoryAdminStatus indicates the current
administrative state of the SAP or SDP ID returned in response to a
'macPing' test. A value of 'true' indicates the SAP or SDP is
administratively 'up'.
The value of this object MUST be reported as 'false' when no ping
responses have been received or an active test has not yet timed out.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.1.7.1.13 |
tmnxOamMacPingHistoryOperStatusThe value of tmnxOamMacPingHistoryOperStatus indicates the current
operational state of the SAP or SDP ID returned in response to a
'macPing' test. A value of 'true' indicates the SAP or SDP is
operationally 'up'.
The value of this object MUST be reported as 'false' when no ping
responses have been received or an active test has not yet timed out.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.1.7.1.14 |
tmnxOamMacPingHistoryResponsePlaneThe value of tmnxOamMacPingHistoryResponsePlane indicates the
response plane from which this ping response was received.ro TmnxOamTestResponsePlane .1.3.6.1.4.1.6527.3.1.2.11.1.7.1.15 |
tmnxOamMacPingHistorySizeThe value of tmnxOamMacPingHistorySize indicates the size in octets
of the user payload in a ping request packet. It does not include
the service encapsulation.ro Unsigned32 UNITS "octets" .1.3.6.1.4.1.6527.3.1.2.11.1.7.1.16 |
tmnxOamMacPingHistoryInOneWayTimeThe amount of time measured in microseconds from when an OAM
probe reply was sent to when it was received by this host
(in-bound one-way time). The value of this object is reported
as 0 when the information is not available.ro Integer32 UNITS "microseconds" .1.3.6.1.4.1.6527.3.1.2.11.1.7.1.17 |
tmnxOamMacPingHistorySrcAddrTypeThe value of tmnxOamMacPingHistorySrcAddrType indicates the Internet
address type stored in tmnxOamMacPingHistorySrcAddress.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.11.1.7.1.18 |
tmnxOamMacPingHistorySrcAddressThe value of tmnxOamMacPingHistorySrcAddress indicates the Internet
address of the remote node that generated this reply to a OAM probe.ro InetAddress .1.3.6.1.4.1.6527.3.1.2.11.1.7.1.19 |
tmnxOamMacPingL2MapTableDefines a table for storing the results of an OAM 'macQuery'
probe operation where a L2 mapping TLV is returned. Only one
downstream and one upstream L2 mapping entry is returned if the
'macQuery' replier has no egress mapping for the requested MAC
address but it does have an SDP binding. Multiple downstream L2
mappings that specify the replier's flooding domain may be returned
if the replier has no bindings for the MAC address.
An entry in this table is created when the result of an OAM
'macQuery'probe is determined.
An entry is removed from this table when its corresponding
tmnxOamPingCtlEntry is deleted.obsolete SEQUENCE OF TmnxOamMacPingL2MapEntry .1.3.6.1.4.1.6527.3.1.2.11.1.8 |
tmnxOamMacPingL2MapEntryDefines an entry in the tmnxOamMacPingL2MapTable. The first two
index elements identify the tmnxOamPingCtlEntry that a
tmnxOamMacPingL2MapEntry belongs to. The third index element
identifies a specific OAM test run. The fourth index element
selects the group of responses associated with a specific probe
attempt. The fifth index selects a single OAM 'macQuery' reply.
Note that in the case of a successful 'macQuery' reply there will
be only two row entries created per test run. However there may
also be one or more error replies. The sixth index selects a
single L2 mapping entry within a specific probe reply.obsolete TmnxOamMacPingL2MapEntry .1.3.6.1.4.1.6527.3.1.2.11.1.8.1 |
tmnxOamMacPingL2MapIndexAn entry in this table is created when the result of a OAM
'macQuery' probe is determined. The initial 2 instance identifier
index values identify the tmnxOamPingCtlEntry that a OAM probe result
(tmnxOamMacPingHistoryEntry) belongs to. The tmnxOamMacPingHistoryIndex
identifies a group of replies received in response to a specific
probe transmission. The tmnxOamMacPingReplyIndex selects a single
OAM 'macQuery' reply.
The tmnxOamMacPingL2MapIndex selects a single L2 mapping entry
within a specific 'macQuery' probe reply.
The agent starts assigning tmnxOamMacPingL2MapIndex values at 1.obsolete Unsigned32 (1..'ffffffff'h) SYNTAX Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.1.8.1.1 |
tmnxOamMacPingL2MapRouterIDThe value of tmnxOamMacPingL2MapRouterID is the router ID for this
L2 mapping entry.roobsolete IpAddress .1.3.6.1.4.1.6527.3.1.2.11.1.8.1.2 |
tmnxOamMacPingL2MapLabelThe value of tmnxOamMacPingL2MapLabel is the label used by the
router for the L2FEC or VC ID specified by this L2 mapping entry.roobsolete MplsLabel (MPLS-LDP-MIB) .1.3.6.1.4.1.6527.3.1.2.11.1.8.1.3 |
tmnxOamMacPingL2MapProtocolThe value of tmnxOamMacPingL2MapProtocol is the signaling protocol
used by the router for the L2FEC or VC ID specified by this L2
mapping entry.roobsolete TmnxOamSignalProtocol .1.3.6.1.4.1.6527.3.1.2.11.1.8.1.4 |
tmnxOamMacPingL2MapVCTypeThe value of tmnxOamMacPingL2MapVCType specifies the class of
VC ID given in tmnxOamMacPingL2MapVCID.roobsolete TmnxOamVcType .1.3.6.1.4.1.6527.3.1.2.11.1.8.1.5 |
tmnxOamMacPingL2MapVCIDThe value of tmnxOamMacPingL2MapVCID is the VC ID associated with
the label used by the L2FEC specified by this L2 mapping entry.roobsolete TmnxVcId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.11.1.8.1.6 |
tmnxOamMacPingL2MapDirectionThe value of tmnxOamMacPingL2MapDirection specifies the direction
that this L2 mapping entry is in relation to the node that returned
the 'macQuery' reply.roobsolete Enumeration .1.3.6.1.4.1.6527.3.1.2.11.1.8.1.7 |
tmnxOamLspPingCtlTableDefines the Alcatel-Lucent SROS OAM LSP Ping Control Table for
providing, via SNMP, the capability of performing Alcatel-Lucent
SROS OAM 'lspPing' test operations. The results of these
tests are stored in the tmnxOamPingResultsTable and the
tmnxOamPingHistoryTable. SEQUENCE OF TmnxOamLspPingCtlEntry .1.3.6.1.4.1.6527.3.1.2.11.1.9 |
tmnxOamLspPingCtlEntryDefines an entry in the tmnxOamLspPingCtlTable. The first index
element, tmnxOamPingCtlOwnerIndex, is of type SnmpAdminString,
a textual convention that allows for use of the SNMPv3
View-Based Access Control Model (RFC 2575 [11], VACM)
and allows a management application to identify its entries.
The second index, tmnxOamPingCtlTestIndex, enables the same
management application to have multiple outstanding requests. TmnxOamLspPingCtlEntry .1.3.6.1.4.1.6527.3.1.2.11.1.9.1 |
tmnxOamLspPingCtlVRtrIDThe unique value which identifies this virtual router in the
Alcatel-Lucent SROS system. The vRtrID value for each virtual router
must remain constant at least from one re-initialization of the
system management processor (CPM) to the next. There will always
be at least one router entry defined by the agent with vRtrID=1
which represents the transport router.
This object was obsoleted in release 6.0R15 and replaced with
tmnxOamPingCtlVRtrID in tmnxOamPingCtlTable.rwobsolete TmnxVRtrID (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.11.1.9.1.1 |
tmnxOamLspPingCtlLspNameAdministrative name of the target Labeled Switch Path (LSP) for this
OAM LSP Ping test. The LSP name must be unique within the virtual
router instance specified by tmnxOamLspPingCtlVRtrID.
This parameter is mutually exclusive with the IP prefix parameter
associated with an LDP based LSP (tmnxOamLspPingCtlLdpIpPrefix).
Either the LSP name or the LDP IP Prefix must be specified but not
both.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.11.1.9.1.2 |
tmnxOamLspPingCtlReturnLspAdministrative name of the Labeled Switch Path (LSP) to use to
return the response to this OAM LSP Ping test. The LSP name must
be unique within the virtual router instance specified by
tmnxOamLspPingCtlVRtrID.
This is an optional parameter.rwobsolete TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.11.1.9.1.3 |
tmnxOamLspPingCtlTtlSpecifies the outermost label time-to-live value. This is an optional
parameter.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.1.9.1.4 |
tmnxOamLspPingCtlPathNameAdministrative name of the Path (LSP) for this OAM LSP Ping test.
The Path name must be unique within the virtual router
instance specified by tmnxOamLspPingCtlVRtrID.
This is an optional parameter which can be specified only if the
LSP Name parameter is specified.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.11.1.9.1.5 |
tmnxOamLspPingCtlLdpIpPrefixThe IP prefix for the LDP based LSP for this OAM LSP Ping test.
This parameter is mutually exclusive with the LSP name parameter
(tmnxOamLspPingCtlLspName). Either the LDP IP Prefix or the LSP
name must be specified but not both.
This object was obsoleted in release 4.0 and replaced with
InetAddress objects tmnxOamLspPingCtlLdpPrefixType and
tmnxOamLspPingCtlLdpPrefix.rwobsolete IpAddress .1.3.6.1.4.1.6527.3.1.2.11.1.9.1.6 |
tmnxOamLspPingCtlLdpIpPrefixLenThe IP prefix length for the LDP based LSP for this OAM LSP
Ping test.
The value of this parameter is valid only when LDP IP Prefix
has been specified.
This object was obsoleted in release 4.0 and replaced with
InetAddress object tmnxOamLspPingCtlLdpPrefixLen.rwobsolete IpAddressPrefixLength (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.11.1.9.1.7 |
tmnxOamLspPingCtlLdpPrefixTypeThe value of tmnxOamLspPingCtlLdpPrefixType specifies the type
of Internet address stored in tmnxOamLspPingCtlLdpPrefix.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.11.1.9.1.8 |
tmnxOamLspPingCtlLdpPrefixThe value of tmnxOamLspPingCtlLdpPrefix specifies the Internet
prefix for the LDP based LSP for this OAM LSP Ping test.
This parameter is mutually exclusive with the LSP name parameter
(tmnxOamLspPingCtlLspName). Either the LDP IP Prefix or the LSP
name must be specified but not both.rw InetAddress .1.3.6.1.4.1.6527.3.1.2.11.1.9.1.9 |
tmnxOamLspPingCtlLdpPrefixLenThe value of tmnxOamLspPingCtlLdpPrefixLen specifies the Internet
address prefix length for the LDP based LSP for this OAM LSP
Ping test.
The value of this parameter is valid only when LDP IP Prefix
has been specified.rw InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.11.1.9.1.10 |
tmnxOamLspPingCtlPathDestTypeThe value of tmnxOamLspPingCtlPathDestType specifies the type
of Internet address stored in tmnxOamLspPingCtlPathDest.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.11.1.9.1.11 |
tmnxOamLspPingCtlPathDestThe value of tmnxOamLspPingCtlPathDest specifies a unique path
for this OAM LSP Ping to traverse. This address is used as part of a
hash key to select the appropriate ECMP path to the destination of
an OAM LSP Ping test.
This is an optional parameter.rw InetAddress .1.3.6.1.4.1.6527.3.1.2.11.1.9.1.12 |
tmnxOamLspPingCtlNhIntfNameAdministrative name of the next hop interface for this OAM LSP
Ping test to be sent. The interface name must be unique within
the virtual router instance specified by tmnxOamLspPingCtlVRtrID.
This is an optional parameter which can be specified only if the
tmnxOamLspPingCtlPathDest parameter is specified. This parameter
is mutually exclusive with the tmnxOamLspPingCtlNhAddress
parameter. Either the next-hop interface name or next-hop address
can be specified but not both. An attempt to set this object to a
non-default value when tmnxOamLspPingCtlNhAddress has a
non-default value will result in an 'inconsistentValue' error.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.11.1.9.1.13 |
tmnxOamLspPingCtlNhAddressTypeThe value of tmnxOamLspPingCtlNhAddressType specifies the type
of Internet address stored in tmnxOamLspPingCtlNhAddress.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.11.1.9.1.14 |
tmnxOamLspPingCtlNhAddressThe value of tmnxOamLspPingCtlNhAddress specifies the Interface
address to the next hop in which this OAM LSP ping test will be
transmitted.
This is an optional parameter which can be specified only if the
tmnxOamLspPingCtlPathDest parameter is specified. This parameter
is mutually exclusive with tmnxOamLspPingCtlNhIntfName parameter.
Either the next-hop interface name or next-hop address
can be specified but not both. An attempt to set this object to a
non-default value when tmnxOamLspPingCtlNhIntfName has a
non-default value will result in an 'inconsistentValue' error.rw InetAddress .1.3.6.1.4.1.6527.3.1.2.11.1.9.1.15 |
tmnxOamLspPingCtlTestSubModeThe value of tmnxOamLspPingCtlTestSubMode specifies the type of LSP
ping test to perform.
When this object is 'unspecified(1)', the type of LSP ping test to be
performed is determined when the test is started, from the set of
tmnxOamLspPingCtlTable objects configured with non-default values.
If there is a mismatch between tmnxOamLspPingCtlTestSubMode and the
type of the LSP to be tested, the test will fail. For example, if
tmnxOamLspPingCtlTestSubMode is 'static(2)', and
tmnxOamLspPingCtlLspName refers to an LSP with
TIMETRA-MPLS-MIB::vRtrMplsLspType not equal to 'mplsTp(7)', the test
will fail.
The supported object combinations for LSP ping tests are listed in the
tmnxOamLspPingCtlTable DESCRIPTION clause.rw TmnxOamLspTestSubMode .1.3.6.1.4.1.6527.3.1.2.11.1.9.1.16 |
tmnxOamLspPingCtlMplsTpPathTypeThe value of tmnxOamLspPingCtlMplsTpPathType specifies the type of the
MPLS-TP path to be tested.
The supported object combinations for LSP ping tests are listed in the
tmnxOamLspPingCtlTable DESCRIPTION clause.rw TmnxOamMplsTpPathType .1.3.6.1.4.1.6527.3.1.2.11.1.9.1.17 |
tmnxOamLspPingCtlMplsTpGlobalIdThe value of tmnxOamLspPingCtlMplsTpGlobalId specifies the target
MPLS-TP Global Identifier to be used for the test.
The supported object combinations for LSP ping tests are listed in the
tmnxOamLspPingCtlTable DESCRIPTION clause.rw TmnxMplsTpGlobalID .1.3.6.1.4.1.6527.3.1.2.11.1.9.1.18 |
tmnxOamLspPingCtlMplsTpNodeIdThe value of tmnxOamLspPingCtlMplsTpNodeId specifies the target
MPLS-TP Node Identifier to be used for the test.
A value of zero indicates that no Node Identifier has been configured.
The supported object combinations for LSP ping tests are listed in the
tmnxOamLspPingCtlTable DESCRIPTION clause.rw TmnxMplsTpNodeID .1.3.6.1.4.1.6527.3.1.2.11.1.9.1.19 |
tmnxOamLspPingCtlAssocChannelThe value of tmnxOamLspPingCtlAssocChannel specifies the launched echo
request's usage of the Associated Channel (ACH) mechanism, when testing
an MPLS-TP LSP.
When tmnxOamLspPingCtlTestSubMode is 'static(2)', the default value
for tmnxOamLspPingCtlAssocChannel is 'nonIp(2)'.
The supported object combinations for LSP ping tests are listed in the
tmnxOamLspPingCtlTable DESCRIPTION clause.rw TmnxOamLspAssocChannel .1.3.6.1.4.1.6527.3.1.2.11.1.9.1.20 |
tmnxOamLspPingCtlForceThe value of tmnxOamLspPingCtlForce specifies whether or not to force
the transmission of the 'lspPing' request PDU(s).
If tmnxOamLspPingCtlForce is 'true(1)', the test will proceed and
request PDU(s) will be sent regardless of the local operational status
of the tested LSP path.
If tmnxOamLspPingCtlForce is 'false(2)', the test will fail
immediately when the local operational status of the tested LSP path is
down.
The supported object combinations for LSP ping tests are listed in the
tmnxOamLspPingCtlTable DESCRIPTION clause.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.1.9.1.21 |
tmnxOamVprnPingCtlTableDefines the Alcatel-Lucent SROS OAM VPRN Ping Control Table for
providing, via SNMP, the capability of performing Alcatel-Lucent
SROS OAM 'vprnPing' test operations.
The results of these tests are stored in the tmnxOamPingResultsTable
and the tmnxOamTrProbeHistoryTable. There will be no entries for
these test in the tmnxOamPingHistoryTable. SEQUENCE OF TmnxOamVprnPingCtlEntry .1.3.6.1.4.1.6527.3.1.2.11.1.10 |
tmnxOamVprnPingCtlEntryDefines an entry in the tmnxOamVprnPingCtlTable. The first index
element, tmnxOamPingCtlOwnerIndex, is of type SnmpAdminString,
a textual convention that allows for use of the SNMPv3
View-Based Access Control Model (RFC 2575 [11], VACM)
and allows a management application to identify its entries.
The second index, tmnxOamPingCtlTestIndex, enables the same
management application to have multiple outstanding requests. TmnxOamVprnPingCtlEntry .1.3.6.1.4.1.6527.3.1.2.11.1.10.1 |
tmnxOamVprnPingCtlSourceIpAddrSpecifies the Ipv4 address to be used as the source for
performing an OAM ping operation when tmnxOamPingCtlTestMode has
a value of 'vprnPing'. This parameter is required.
This object was obsoleted in release 4.0 and replaced with
InetAddress objects tmnxOamVprnPingCtlSrcAddrType and
tmnxOamVprnPingCtlSrcAddress.rwobsolete IpAddress .1.3.6.1.4.1.6527.3.1.2.11.1.10.1.1 |
tmnxOamVprnPingCtlReplyControlWhen the value of tmnxOamVprnPingCtlReplyControl is 'true', the
OAM ping response is returned using the control plane. If its value
is 'false', the packet is sent via the data plane.
This object is optional and is not relevant when
tmnxOamPingCtlTestMode has a value other than 'vprnPing'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.1.10.1.2 |
tmnxOamVprnPingCtlTtlSpecifies the vc-label time-to-live value.
This object is optional and is not relevant when
tmnxOamPingCtlTestMode has a value other than 'vprnPing'.
While performing the test with a ttl of 1 no responses should ever be
expected.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.1.10.1.3 |
tmnxOamVprnPingCtlSrcAddrTypeThe value of tmnxOamVprnPingCtlSrcAddrType specifies the Internet
address type stored in tmnxOamVprnPingCtlSrcAddress.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.11.1.10.1.4 |
tmnxOamVprnPingCtlSrcAddressThe value of tmnxOamVprnPingCtlSrcAddress specifies the Internet
address to be used as the source for performing an OAM ping
operation when tmnxOamPingCtlTestMode has a value of 'vprnPing'.
This parameter is required.rw InetAddress .1.3.6.1.4.1.6527.3.1.2.11.1.10.1.5 |
tmnxOamAtmPingCtlTableDefines the Alcatel-Lucent SROS OAM ATM Ping Control Table for providing,
via SNMP, the capability of performing Alcatel-Lucent SROS OAM 'atmPing'
test operations.
The results of these tests are stored in the tmnxOamPingResultsTable
and the tmnxOamPingHistoryTable. SEQUENCE OF TmnxOamAtmPingCtlEntry .1.3.6.1.4.1.6527.3.1.2.11.1.11 |
tmnxOamAtmPingCtlEntryDefines an entry in the tmnxOamAtmPingCtlTable. The first index
element, tmnxOamPingCtlOwnerIndex, is of type SnmpAdminString,
a textual convention that allows for use of the SNMPv3
View-Based Access Control Model (RFC 2575 [11], VACM)
and allows a management application to identify its entries.
The second index, tmnxOamPingCtlTestIndex, enables the same
management application to have multiple outstanding requests. TmnxOamAtmPingCtlEntry .1.3.6.1.4.1.6527.3.1.2.11.1.11.1 |
tmnxOamAtmPingCtlPortIdThe value of tmnxOamAtmPingCtlPortId is the ID of the access
port of the target VC. This parameter is required.rw TmnxPortID (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.11.1.11.1.1 |
tmnxOamAtmPingCtlVpiThe value of tmnxOamAtmPingCtlVpi is the VPI of the VC used to
send the OAM ATM ping. This is a required parameter.rw AtmVpIdentifier (ATM-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.11.1.11.1.2 |
tmnxOamAtmPingCtlVciThe value of tmnxOamAtmPingCtlVci is the VCI of the VC used to
send the OAM ATM ping. This is a required parameter.rw AtmVcIdentifier (ATM-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.11.1.11.1.3 |
tmnxOamAtmPingCtlLpbkLocationThe value of tmnxOamAtmPingCtlLpbkLocation specifies the Loopback
Location ID used in the ATM OAM loopback cell. If all bits in the
Loopback Location ID are '1', the destination of the OAM ATM ping
is the far-end destination of the VC. Otherwise the cell is destined
to a specific ATM node in the ATM network.
This is an optional parameter.rw OCTET STRING .1.3.6.1.4.1.6527.3.1.2.11.1.11.1.4 |
tmnxOamAtmPingCtlSegmentThe value of tmnxOamAtmPingCtlSegment determines if the
ATM OAM loopback cell is destined to the first segment going in
the line direction or the PVCC's connection endpoint.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.11.1.11.1.5 |
tmnxOamMfibPingCtlTableDefines the Alcatel-Lucent SROS OAM MFIB Ping Control Table for
providing, via SNMP, the capability of performing Alcatel-Lucent SROS
OAM 'mfibPing' test operations.
The results of these tests are stored in the
tmnxOamPingResultsTable and the tmnxOamPingHistoryTable. Rows are
created in the tmnxOamMfibPingCtlTable only for those entries in
the tmnxOamPingCtlTable where tmnxOamPingCtlTestMode has a value of
'mfibPing'. SEQUENCE OF TmnxOamMfibPingCtlEntry .1.3.6.1.4.1.6527.3.1.2.11.1.12 |
tmnxOamMfibPingCtlEntryDefines an entry in the tmnxOamMfibPingCtlTable. The
first index element, tmnxOamPingCtlOwnerIndex, is of
type SnmpAdminString, a textual convention that allows
for use of the SNMPv3 View-Based Access Control Model
(RFC 2575 [11], VACM) and allows a management
application to identify its entries. The second index,
tmnxOamPingCtlTestIndex, enables the same management
application to have multiple outstanding requests. TmnxOamMfibPingCtlEntry .1.3.6.1.4.1.6527.3.1.2.11.1.12.1 |
tmnxOamMfibPingCtlSourceIpAddrSpecifies the Ipv4 address to be used as the source for performing
an OAM ping operation when tmnxOamPingCtlTestMode has a value of
'mfibPing' in which case this parameter is required. If
tmnxOamPingCtlTestMode is different from 'mfibPing' this field is
ignored.
This object was obsoleted in release 4.0 and replaced with
InetAddress objects tmnxOamMfibPingCtlSrcAddrType and
tmnxOamMfibPingCtlSrcAddress.rwobsolete IpAddress .1.3.6.1.4.1.6527.3.1.2.11.1.12.1.1 |
tmnxOamMfibPingCtlDestIpAddrSpecifies the Ipv4 multicast address to be used as the destination
for performing an OAM ping operation when tmnxOamPingCtlTestMode has a
value of 'mfibPing' in which case this parameter is required. If
tmnxOamPingCtlTestMode is different from 'mfibPing' this field is
ignored.
This object was obsoleted in release 4.0 and replaced with
InetAddress objects tmnxOamMfibPingCtlDestAddrType and
tmnxOamMfibPingCtlDestAddress.rwobsolete IpAddress .1.3.6.1.4.1.6527.3.1.2.11.1.12.1.2 |
tmnxOamMfibPingCtlReplyControlWhen the value of tmnxOamMfibPingCtlReplyControl is 'true', the
OAM ping response is returned using the control plane. If its value
is 'false', the packet is sent via the data plane.
This object is optional and is not relevant when tmnxOamPingCtlTestMode
has a value other than 'mfibPing'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.1.12.1.3 |
tmnxOamMfibPingCtlTtlSpecifies the vc-label time-to-live value.
This object is optional and is not relevant when
tmnxOamPingCtlTestMode has a value other than 'mfibPing'.
While performing the test with a ttl of 1 no responses should ever
be expected.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.1.12.1.4 |
tmnxOamMfibPingCtlSrcAddrTypeThe value of tmnxOamMfibPingCtlSrcAddrType specifies the Internet
address type stored in tmnxOamMfibPingCtlSrcAddress.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.11.1.12.1.5 |
tmnxOamMfibPingCtlSrcAddressThe value of tmnxOamMfibPingCtlSrcAddress specifies the Internet
address to be used as the source for performing an OAM ping
operation when tmnxOamPingCtlTestMode has a value of 'mfibPing'
and the value of tmnxOamMfibPingCtlDestMacAddr is all zeros, in
which case this parameter is required. If tmnxOamPingCtlTestMode is
different from 'mfibPing' this field is ignored.rw InetAddress .1.3.6.1.4.1.6527.3.1.2.11.1.12.1.6 |
tmnxOamMfibPingCtlDestAddrTypeThe value of tmnxOamMfibPingCtlDestAddrType specifies the Internet
multicast address type stored in tmnxOamMfibPingCtlDestAddress.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.11.1.12.1.7 |
tmnxOamMfibPingCtlDestAddressThe value of tmnxOamMfibPingCtlDestAddress specifies the Internet
multicast address to be used as the destination for performing an
OAM ping operation when tmnxOamPingCtlTestMode has a value of
'mfibPing' and the value of tmnxOamMfibPingCtlDestMacAddr is all zeros,
in which case this parameter is required. If tmnxOamPingCtlTestMode is
different from 'mfibPing' this field is ignored.rw InetAddress .1.3.6.1.4.1.6527.3.1.2.11.1.12.1.8 |
tmnxOamMfibPingCtlDestMacAddrThe value of tmnxOamMfibPingCtlDestMacAddr specifies the IPv6
multicast MAC address to be used as the destination for performing an
OAM ping operation when tmnxOamPingCtlTestMode has a value of
'mfibPing' and objects tmnxOamMfibPingCtlSrcAddrType and
tmnxOamMfibPingCtlDestAddrType have a value of 'unknown (0)',
in which case this parameter is required. If tmnxOamPingCtlTestMode is
different from 'mfibPing' this field is ignored.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.1.12.1.9 |
tmnxOamCpePingCtlTableDefines the Alcatel-Lucent SROS OAM CPE Ping Control Table for
providing, via SNMP, the capability of performing Alcatel-Lucent SROS
OAM 'cpePing' test operations.
The results of these tests are stored in the
tmnxOamPingResultsTable and the tmnxOamPingHistoryTable. Rows are
created in the tmnxOamCpePingCtlTable only for those entries in the
tmnxOamPingCtlTable where tmnxOamPingCtlTestMode has a value of
'cpePing'. SEQUENCE OF TmnxOamCpePingCtlEntry .1.3.6.1.4.1.6527.3.1.2.11.1.13 |
tmnxOamCpePingCtlEntryDefines an entry in the tmnxOamCpePingCtlTable. The first index
element, tmnxOamPingCtlOwnerIndex, is of type SnmpAdminString, a
textual convention that allows for use of the SNMPv3 View-Based
Access Control Model (RFC 2575 [11], VACM) and allows a management
application to identify its entries. The second index,
tmnxOamPingCtlTestIndex, enables the same management application to
have multiple outstanding requests. TmnxOamCpePingCtlEntry .1.3.6.1.4.1.6527.3.1.2.11.1.13.1 |
tmnxOamCpePingCtlSourceIpAddrSpecifies the Ipv4 address to be used as the source for performing
an CPE ping operation when tmnxOamPingCtlTestMode has a value of
'cpePing'. This parameter is required for 'cpePing' and ignored in
all other cases.
This object was obsoleted in release 4.0 and replaced with
InetAddress objects tmnxOamCpePingCtlSrcAddrType and
tmnxOamCpePingCtlSrcAddress.rwobsolete IpAddress .1.3.6.1.4.1.6527.3.1.2.11.1.13.1.1 |
tmnxOamCpePingCtlSendControlWhen the value of tmnxOamCpePingCtlSendControl is 'true', the OAM
ping packet is sent via the control plane. If its value is 'false',
the packet is sent via the data plane.
This object is optional and is not relevant when tmnxOamPingCtlTestMode
has a value other than 'cpePing'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.1.13.1.2 |
tmnxOamCpePingCtlReplyControlWhen the value of tmnxOamCpePingCtlReplyControl is 'true', the OAM
ping response is returned using the control plane. If its value is
'false', the packet is sent via the data plane.
This object is optional and is not relevant when
tmnxOamPingCtlTestMode has a value other than 'cpePing'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.1.13.1.3 |
tmnxOamCpePingCtlTtlSpecifies the vc-label time-to-live value. This object is optional
and is not relevant when tmnxOamPingCtlTestMode has a value other
than 'cpePing'. When performing the test with a ttl=1, the cpe-ping
is only done to the local SAP(s).rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.1.13.1.4 |
tmnxOamCpePingCtlSrceMacAddrWhen set to a non zero value, the system will use the value as
source mac address in the ARP request that will be sent to the CPE.
If set to 0, the MAC address configured for the CPM is used. This
object is optional and is not relevant when tmnxOamPingCtlTestMode
has a value other than 'cpePing'.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.1.13.1.5 |
tmnxOamCpePingCtlSrcAddrTypeThe value of tmnxOamCpePingCtlSrcAddrType specifies the Internet
address type stored in tmnxOamCpePingCtlSrcAddress.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.11.1.13.1.6 |
tmnxOamCpePingCtlSrcAddressThe value of tmnxOamCpePingCtlSrcAddress specifies the Internet
address to be used as the source for performing a CPE ping operation
when tmnxOamPingCtlTestMode has a value of 'cpePing'. This parameter
is required for 'cpePing' and ignored in all other cases.rw InetAddress .1.3.6.1.4.1.6527.3.1.2.11.1.13.1.7 |
tmnxOamMRInfoRespTableDefines the Alcatel-Lucent SROS OAM Multicast Router Information
Response Table for providing, via SNMP, the capability of performing
Alcatel-Lucent SROS OAM 'mrinfo' test operations. The results of these
tests are stored in the tmnxOamPingResultsTable, the
tmnxOamPingHistoryTable and the tmnxOamMRInfoRespTable. SEQUENCE OF TmnxOamMRInfoRespEntry .1.3.6.1.4.1.6527.3.1.2.11.1.14 |
tmnxOamMRInfoRespEntryDefines an entry in the tmnxOamMRInfoRespTable. The first index
element, tmnxOamPingCtlOwnerIndex, is of type SnmpAdminString,
a textual convention that allows for use of the SNMPv3
View-Based Access Control Model (RFC 2575 [11], VACM)
and allows a management application to identify its entries.
The second index, tmnxOamPingCtlTestIndex, enables the same
management application to have multiple outstanding requests. TmnxOamMRInfoRespEntry .1.3.6.1.4.1.6527.3.1.2.11.1.14.1 |
tmnxOamMRInfoRespCapabilitiestmnxOamMRInfoRespCapabilities indicates the capabilities of the router
responding to the mrinfo request:
leaf(0) This is a leaf router
prune(1) This router understands pruning
genid(2) This router sends Generation Id's
mtrace(3) This router handles Mtrace requests
snmp(4) This router supports the DVMRP MIBro Bits .1.3.6.1.4.1.6527.3.1.2.11.1.14.1.1 |
tmnxOamMRInfoRespMinorVersiontmnxOamMRInfoRespMinorVersion indicates the minor software version
on the router responding to the mrinfo request.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.1.14.1.2 |
tmnxOamMRInfoRespMajorVersiontmnxOamMRInfoRespMajorVersion indicates the major software version
on the router responding to the mrinfo request.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.1.14.1.3 |
tmnxOamMRInfoRespNumInterfacestmnxOamMRInfoRespNumInterfaces indicates the number of interfaces
in the mrinfo response packet. These interfaces are listed in the
tmnxOamMRInfoRespIfTable.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.1.14.1.4 |
tmnxOamMRInfoRespIfTableDefines the Alcatel-Lucent SROS OAM Multicast Router Information
Interface Table for providing, via SNMP, the capability of performing
Alcatel-Lucent SROS OAM 'mrinfo' test operation. The results of
these tests are stored in the tmnxOamPingResultsTable, the
tmnxOamPingHistoryTable and the tmnxOamMRInfoRespIfTable. SEQUENCE OF TmnxOamMRInfoRespIfEntry .1.3.6.1.4.1.6527.3.1.2.11.1.15 |
tmnxOamMRInfoRespIfEntryDefines an entry in the tmnxOamMRInfoRespIfTable. The first index
element, tmnxOamPingCtlOwnerIndex, is of type SnmpAdminString,
a textual convention that allows for use of the SNMPv3
View-Based Access Control Model (RFC 2575 [11], VACM)
and allows a management application to identify its entries.
The second index, tmnxOamPingCtlTestIndex, enables the same
management application to have multiple outstanding requests. TmnxOamMRInfoRespIfEntry .1.3.6.1.4.1.6527.3.1.2.11.1.15.1 |
tmnxOamMRInfoRespIfIndextmnxOamMRInfoRespIfIndex is the index into the
tmnxOamMRInfoRespIfTable. The mrinfo response packet has
the router's interfaces on which multicast is enabled.
tmnxOamMRInfoRespIfIndex is used to identify those interfaces. Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.1.15.1.1 |
tmnxOamMRInfoRespIfAddresstmnxOamMRInfoRespIfAddress indicates the interface address on the
router responding to the mrinfo request.
This object was obsoleted in release 4.0 and replaced with
InetAddress objects tmnxOamMRInfoRespIfAddrType and
tmnxOamMRInfoRespIfAddr.roobsolete IpAddress .1.3.6.1.4.1.6527.3.1.2.11.1.15.1.2 |
tmnxOamMRInfoRespIfMetrictmnxOamMRInfoRespIfMetric indicates the metric on the interface.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.1.15.1.3 |
tmnxOamMRInfoRespIfThresholdtmnxOamMRInfoRespIfThreshold indicates the threshold on the
interface.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.1.15.1.4 |
tmnxOamMRInfoRespIfFlagstmnxOamMRInfoRespIfFlags indicates the flags associated with
an interface:
tunnel(0) Neighbor reached via tunnel
srcrt(1) Tunnel uses IP source routing
reserved1(2) No longer used
reserved2(3) No longer used
down(4) Operational status down
disabled(5) Administrative status down
querier(6) Querier for interface
leaf(7) No downstream neighbors on interfacero Bits .1.3.6.1.4.1.6527.3.1.2.11.1.15.1.5 |
tmnxOamMRInfoRespIfNbrCounttmnxOamMRInfoRespIfNbrCount indicates the number of multicast neighbors
on the interface. The neighbors are listed in the
tmnxOamMRInfoRespIfNbrTable.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.1.15.1.6 |
tmnxOamMRInfoRespIfAddrTypetmnxOamMRInfoRespIfAddrType indicates the Internet address type
stored in tmnxOamMRInfoRespIfAddr.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.11.1.15.1.7 |
tmnxOamMRInfoRespIfAddrtmnxOamMRInfoRespIfAddr indicates the Internet address of the
interface on the router responding to the mrinfo request.ro InetAddress .1.3.6.1.4.1.6527.3.1.2.11.1.15.1.8 |
tmnxOamMRInfoRespIfNbrTableDefines the Alcatel-Lucent SROS OAM Multicast Router Information
Interface Neighbor Table for providing, via SNMP, the capability of
performing Alcatel-Lucent SROS OAM 'mrInfo' test operation. This table
contains entries for neighbors on an interface. The results of the
mrinfo test are stored in the tmnxOamPingResultsTable, the
tmnxOamPingHistoryTable, the tmnxOamMRInfoRespTable,
the tmnxOamMRInfoRespIfTable and the tmnxOamMRInfoRespIfNbrTable. SEQUENCE OF TmnxOamMRInfoRespIfNbrEntry .1.3.6.1.4.1.6527.3.1.2.11.1.16 |
tmnxOamMRInfoRespIfNbrEntryDefines an entry in the tmnxOamMRInfoRespIfNbrTable. The first index
element, tmnxOamPingCtlOwnerIndex, is of type SnmpAdminString,
a textual convention that allows for use of the SNMPv3
View-Based Access Control Model (RFC 2575 [11], VACM)
and allows a management application to identify its entries.
The second index, tmnxOamPingCtlTestIndex, enables the same
management application to have multiple outstanding requests. TmnxOamMRInfoRespIfNbrEntry .1.3.6.1.4.1.6527.3.1.2.11.1.16.1 |
tmnxOamMRInfoRespIfNbrIndextmnxOamMRInfoRespIfNbrIndex is used to identify the multicast neighbor
on the interface tmnxOamMRInfoRespIfIndex. Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.1.16.1.1 |
tmnxOamMRInfoRespIfNbrAddresstmnxOamMRInfoRespIfNbrAddress indicates the address of the neighbor
on the interface.
This object was obsoleted in release 4.0 and replaced with
InetAddress objects tmnxOamMRInfoRespIfNbrAddrType and
tmnxOamMRInfoRespIfNbrAddr.roobsolete IpAddress .1.3.6.1.4.1.6527.3.1.2.11.1.16.1.2 |
tmnxOamMRInfoRespIfNbrAddrTypetmnxOamMRInfoRespIfNbrAddrType indicates the Internet address type
stored in tmnxOamMRInfoRespIfNbrAddr.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.11.1.16.1.3 |
tmnxOamMRInfoRespIfNbrAddrtmnxOamMRInfoRespIfNbrAddr indicates the Internet address of the
neighbor on the interface.ro InetAddress .1.3.6.1.4.1.6527.3.1.2.11.1.16.1.4 |
tmnxOamVccvPingCtlTableDefines the Alcatel-Lucent SROS OAM VCCV Ping Control Table for
providing, via SNMP, the capability of performing Alcatel-Lucent
SROS OAM 'vccvPing' test operations.
The results of these tests are stored in the tmnxOamPingResultsTable
and the tmnxOamPingHistoryTable. SEQUENCE OF TmnxOamVccvPingCtlEntry .1.3.6.1.4.1.6527.3.1.2.11.1.17 |
tmnxOamVccvPingCtlEntryDefines an entry in the tmnxOamVccvPingCtlTable. The first index
element, tmnxOamPingCtlOwnerIndex, is of type SnmpAdminString,
a textual convention that allows for use of the SNMPv3
View-Based Access Control Model (RFC 2575 [11], VACM)
and allows a management application to identify its entries.
The second index, tmnxOamPingCtlTestIndex, enables the same
management application to have multiple outstanding requests. TmnxOamVccvPingCtlEntry .1.3.6.1.4.1.6527.3.1.2.11.1.17.1 |
tmnxOamVccvPingCtlSdpIdVcIdThe value of tmnxOamVccvPingCtlSdpIdVcId specifies the SDP binding of
the FEC 128 pseudowire to be used when performing a vccv-ping
operation. A non-zero value is mandatory when testing a FEC 128
pseudowire.
The all-zeros value indicates an unused SDP binding.
If tmnxOamVccvPingCtlSdpIdVcId is set to a non-default value, the
following objects must be default: tmnxOamVccvPingCtlSpokeSdpId,
tmnxOamVccvPingCtlSaiiGlobalId, tmnxOamVccvPingCtlSaiiPrefix,
tmnxOamVccvPingCtlSaiiAcId, tmnxOamVccvPingCtlTaiiGlobalId,
tmnxOamVccvPingCtlTaiiPrefix, and tmnxOamVccvPingCtlTaiiAcId.
If the value of tmnxOamVccvPingCtlSdpIdVcId is non-zero and invalid, or
the pseudowire is administratively down, or unavailable, the OAM Echo
request message probe is not sent and an appropriate error value is
written to tmnxOamPingHistoryStatus for that probe entry. Once the
interval timer expires, the next probe attempt will be made if
required.rw SdpBindId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.11.1.17.1.1 |
tmnxOamVccvPingCtlReplyModeThe value of tmnxOamVccvPingCtlReplyMode as specified in
draft-ietf-mpls-lsp-ping-10.txt sets the method of reply
due to the vccv-ping request message.
ip(2) out-of-band reply
controlChannel(4) inband reply
This parameter is optional for vccv-ping.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.11.1.17.1.2 |
tmnxOamVccvPingCtlPwIdThe value of tmnxOamVccvPingCtlPwId specifies the pseudowire identifier
to be used when performing a vccv-ping operation on a FEC 128
pseudowire. The pseudowire Id is a non-zero 32-bit connection ID
required by FEC 128, as defined in RFC 4379. This object is only valid
when used in conjunction with valid tmnxOamPingCtlTgtAddress and
tmnxOamPingCtlSrcAddress. A value of zero indicates that no pseudowire
Id has been configured.rw TmnxVcIdOrNone (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.11.1.17.1.3 |
tmnxOamVccvPingCtlTtlThe value of tmnxOamVccvPingCtlTtl specifies the time-to-live value
for the vc-label of the echo request message. The outer label TTL is
still set to the default of 255 regardless of this value.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.1.17.1.4 |
tmnxOamVccvPingCtlSpokeSdpIdThe value of tmnxOamVccvPingCtlSpokeSdpId specifies the spoke SDP
identifier to be used when performing a vccv-ping test on a FEC 129
pseudowire. This object is optional.
At most one of tmnxOamVccvPingCtlSdpIdVcId and
tmnxOamVccvPingCtlSpokeSdpId can be set to a non-default value on a
particular row.
A value of zero indicates that no spoke SDP identifier has been
configured.rw TmnxSpokeSdpIdOrZero .1.3.6.1.4.1.6527.3.1.2.11.1.17.1.5 |
tmnxOamVccvPingCtlSaiiGlobalIdThe value of tmnxOamVccvPingCtlSaiiGlobalId specifies the global
identifier of the Source Attachment Individual Identifier (SAII)
to be used when testing a FEC 129 AII Type 2 pseudowire.
tmnxOamVccvPingCtlSaiiGlobalId, tmnxOamVccvPingCtlSaiiPrefix,
tmnxOamVccvPingCtlSaiiAcId, tmnxOamVccvPingCtlTaiiGlobalId,
tmnxOamVccvPingCtlTaiiPrefix, and tmnxOamVccvPingCtlTaiiAcId can be
used (together) to identify a FEC 129 AII Type 2 pseudowire.
At most one of tmnxOamVccvPingCtlSdpIdVcId and
tmnxOamVccvPingCtlSaiiGlobalId can be set to a non-default value on a
particular row.
A value of zero indicates that no global identifier has been
configured.rw TmnxPwGlobalIdOrZero .1.3.6.1.4.1.6527.3.1.2.11.1.17.1.6 |
tmnxOamVccvPingCtlSaiiPrefixThe value of tmnxOamVccvPingCtlSaiiPrefix specifies the prefix of the
Source Attachment Individual Identifier (SAII) to be used when testing
a FEC 129 AII Type 2 pseudowire.
At most one of tmnxOamVccvPingCtlSdpIdVcId and
tmnxOamVccvPingCtlSaiiPrefix can be set to a non-default value on a
particular row.
A value of zero indicates that no prefix has been configured.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.1.17.1.7 |
tmnxOamVccvPingCtlSaiiAcIdThe value of tmnxOamVccvPingCtlSaiiAcId specifies the attachment
circuit identifier of the Source Attachment Individual Identifier
(SAII) to be used when testing a FEC 129 AII Type 2 pseudowire.
At most one of tmnxOamVccvPingCtlSdpIdVcId and
tmnxOamVccvPingCtlSaiiAcId can be set to a non-default value on a
particular row.
A value of zero indicates that no attachment circuit identifier has
been configured.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.1.17.1.8 |
tmnxOamVccvPingCtlTaiiGlobalIdThe value of tmnxOamVccvPingCtlTaiiGlobalId specifies the global
identifier of the Target Attachment Individual Identifier (TAII)
to be used when testing a FEC 129 AII Type 2 pseudowire.
At most one of tmnxOamVccvPingCtlSdpIdVcId and
tmnxOamVccvPingCtlTaiiGlobalId can be set to a non-default value on a
particular row.
A value of zero indicates that no global identifier has been
configured.rw TmnxPwGlobalIdOrZero .1.3.6.1.4.1.6527.3.1.2.11.1.17.1.9 |
tmnxOamVccvPingCtlTaiiPrefixThe value of tmnxOamVccvPingCtlTaiiPrefix specifies the prefix of the
Target Attachment Individual Identifier (TAII) to be used when testing
a FEC 129 AII Type 2 pseudowire.
At most one of tmnxOamVccvPingCtlSdpIdVcId and
tmnxOamVccvPingCtlTaiiPrefix can be set to a non-default value on a
particular row.
A value of zero indicates that no prefix has been configured.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.1.17.1.10 |
tmnxOamVccvPingCtlTaiiAcIdThe value of tmnxOamVccvPingCtlTaiiAcId specifies the attachment
circuit identifier of the Target Attachment Individual Identifier
(TAII) to be used when testing a FEC 129 AII Type 2 pseudowire.
At most one of tmnxOamVccvPingCtlSdpIdVcId and
tmnxOamVccvPingCtlTaiiAcId can be set to a non-default value on a
particular row.
A value of zero indicates that no attachment circuit identifier has
been configured.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.1.17.1.11 |
tmnxOamVccvPingCtlMplsTpGlobalIdThe value of tmnxOamVccvPingCtlMplsTpGlobalId specifies the target
MPLS-TP Global Identifier to be used for the test.
The supported object combinations for VCCV ping tests are listed in the
tmnxOamVccvPingCtlTable DESCRIPTION clause.rw TmnxMplsTpGlobalID .1.3.6.1.4.1.6527.3.1.2.11.1.17.1.12 |
tmnxOamVccvPingCtlMplsTpNodeIdThe value of tmnxOamVccvPingCtlMplsTpNodeId specifies the target
MPLS-TP Node Identifier to be used for the test.
A value of zero indicates that no Node Identifier has been configured.
The supported object combinations for VCCV ping tests are listed in the
tmnxOamVccvPingCtlTable DESCRIPTION clause.rw TmnxMplsTpNodeID .1.3.6.1.4.1.6527.3.1.2.11.1.17.1.13 |
tmnxOamVccvPingCtlTestSubModeThe value of tmnxOamVccvPingCtlTestSubMode specifies the type of VCCV
ping test to perform.
When this object is 'unspecified(1)', the type of VCCV ping test to be
performed is determined when the test is started, from the set of
tmnxOamVccvPingCtlTable objects configured with non-default values.
If there is a mismatch between tmnxOamVccvPingCtlTestSubMode and the
type of the pseudowire to be tested, the test will fail. For example,
if tmnxOamVccvPingCtlTestSubMode is 'static(2)', and
tmnxOamVccvPingCtlSdpIdVcId refers to an SDP binding with
TIMETRA-SDP-MIB::sdpDelivery not equal to 'mplsTp(3)', the test will
fail.
The supported object combinations for VCCV ping tests are listed in the
tmnxOamVccvPingCtlTable DESCRIPTION clause.rw TmnxOamVccvTestSubMode .1.3.6.1.4.1.6527.3.1.2.11.1.17.1.14 |
tmnxOamVccvPingCtlAssocChannelThe value of tmnxOamVccvPingCtlAssocChannel specifies the launched echo
request's usage of the Associated Channel (ACH) mechanism, when
performing an MPLS-TP VCCV ping test.
When tmnxOamVccvPingCtlTestSubMode is 'static(2)', the default value
for tmnxOamVccvPingCtlAssocChannel is 'nonIp(2)'.
The supported object combinations for VCCV ping tests are listed in the
tmnxOamVccvPingCtlTable DESCRIPTION clause.rw TmnxOamVccvAssocChannel .1.3.6.1.4.1.6527.3.1.2.11.1.17.1.15 |
tmnxOamIcmpPingCtlTableDefines the Alcatel-Lucent SROS OAM ICMP Ping Control Table for
providing, via SNMP, the capability of performing Alcatel-Lucent
SROS OAM 'icmpPing' test operations.
The results of these tests are stored in the tmnxOamPingResultsTable
and the tmnxOamPingHistoryTable. SEQUENCE OF TmnxOamIcmpPingCtlEntry .1.3.6.1.4.1.6527.3.1.2.11.1.18 |
tmnxOamIcmpPingCtlEntryDefines an entry in the tmnxOamIcmpPingCtlTable. The first index
element, tmnxOamPingCtlOwnerIndex, is of type SnmpAdminString,
a textual convention that allows for use of the SNMPv3
View-Based Access Control Model (RFC 2575 [11], VACM)
and allows a management application to identify its entries.
The second index, tmnxOamPingCtlTestIndex, enables the same
management application to have multiple outstanding requests. TmnxOamIcmpPingCtlEntry .1.3.6.1.4.1.6527.3.1.2.11.1.18.1 |
tmnxOamIcmpPingCtlRapidThe value of tmnxOamIcmpPingCtlRapid specifies whether or not to send
ICMP ping probes in rapid sequence.
Changing tmnxOamIcmpPingCtlRapid from 'false' to 'true' implicitly sets
tmnxOamPingCtlIntervalUnits to 'centiseconds(2)'. For example, if
tmnxOamPingCtlInterval is 1, that makes the interval for the test 0.01
seconds.
Changing tmnxOamIcmpPingCtlRapid from 'true' to 'false' implicitly sets
tmnxOamPingCtlIntervalUnits to 'seconds(1)'. For example, if
tmnxOamPingCtlInterval is 1, that makes the interval for the test 1
second.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.1.18.1.1 |
tmnxOamIcmpPingCtlTtlThe value of tmnxOamIcmpPingCtlTtl specifies the initial
time-to-live value for the ICMP ping packets.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.1.18.1.2 |
tmnxOamIcmpPingCtlDSFieldThe value of tmnxOamIcmpPingCtlDSField specifies the value to load in
the Type of Service (TOS) octet or the Traffic Class (TC) octet of the
launched ICMP echo request(s). The TOS octet is a field in the IPv4
packet header. The TC octet is a field in the IPv6 packet header.
The value in the TOS or TC octet may influence the route, latency,
and/or probability of loss for the echo request (and, by inference,
for the associated data flow).
This object is optional.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.1.18.1.3 |
tmnxOamIcmpPingCtlPatternThe value of tmnxOamIcmpPingCtlPattern specifies a pattern to
be repeated to fill the data field of the ICMP ping packet.
When the value -1 is specified, the data field will be filled
with positional values.rw Integer32 (-1|0..65535) .1.3.6.1.4.1.6527.3.1.2.11.1.18.1.4 |
tmnxOamIcmpPingCtlNhAddrTypeThe value of tmnxOamIcmpPingCtlNhAddrType specifies the address type
of the tmnxOamIcmpPingCtlNhAddress Internet address.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.11.1.18.1.5 |
tmnxOamIcmpPingCtlNhAddressThe value of tmnxOamIcmpPingCtlNhAddress specifies the Internet
address of the next-hop.
Only one of tmnxOamIcmpPingCtlNhAddress, tmnxOamIcmpPingCtlEgrIfIndex,
tmnxOamIcmpPingCtlEgrIfName, or tmnxOamIcmpPingCtlBypassRouting may be
set to a non-default value. Otherwise, 'inconsistentValue' is
returned.rw InetAddress .1.3.6.1.4.1.6527.3.1.2.11.1.18.1.6 |
tmnxOamIcmpPingCtlEgrIfIndexThe value of tmnxOamIcmpPingCtlEgrIfIndex specifies the ifIndex of the
interface to use to transmit the ICMP ping packets.
If a non-zero value is Set, it must be a known ifIndex. The value
stored is the corresponding interface name string. When
tmnxOamIcmpPingCtlEgrIfIndex is read, the stored interface name string
is converted to an ifIndex (zero, if the interface no longer exists),
and the ifIndex is returned. When tmnxOamIcmpPingCtlEgrIfName is read,
the stored interface name string is returned.
If zero is Set, the empty string is stored in the interface name
string. When tmnxOamIcmpPingCtlEgrIfIndex is read, zero is returned.
When tmnxOamIcmpPingCtlEgrIfName is read, the empty string is returned.
Only one of tmnxOamIcmpPingCtlNhAddress, tmnxOamIcmpPingCtlEgrIfIndex,
tmnxOamIcmpPingCtlEgrIfName, or tmnxOamIcmpPingCtlBypassRouting may be
set to a non-default value. Otherwise, 'inconsistentValue' is
returned.
Managers are encouraged to use tmnxOamIcmpPingCtlEgrIfName (instead of
tmnxOamIcmpPingCtlEgrIfIndex) because tmnxOamIcmpPingCtlEgrIfIndex
will be deleted in a future release.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.6527.3.1.2.11.1.18.1.7 |
tmnxOamIcmpPingCtlBypassRoutingThe value of tmnxOamIcmpPingCtlBypassRouting specifies whether
to send the ping request to a host on a directly attached network,
bypassing the routing table.
Only one of tmnxOamIcmpPingCtlNhAddress, tmnxOamIcmpPingCtlEgrIfIndex,
tmnxOamIcmpPingCtlEgrIfName, or tmnxOamIcmpPingCtlBypassRouting may be
set to a non-default value. Otherwise, 'inconsistentValue' is
returned.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.1.18.1.8 |
tmnxOamIcmpPingCtlDoNotFragmentThe value of tmnxOamIcmpPingCtlDoNotFragment specifies whether or
not the 'DF' (Don't Fragment) bit is set in the ICMP ping packet.
When tmnxOamIcmpPingCtlDoNotFragment has the value 'false',
the 'DF' bit is not set.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.1.18.1.9 |
tmnxOamIcmpPingCtlEgrIfNameThe value of tmnxOamIcmpPingCtlEgrIfName specifies the name of the
interface to use to transmit the ICMP ping packets. The value
provided is accepted whether or not it is a known interface name
(validation is done as part of executing the test).
When tmnxOamIcmpPingCtlEgrIfName is Set, the given interface name
string is stored. When tmnxOamIcmpPingCtlEgrIfName is read, the
interface name string is returned. When tmnxOamIcmpPingCtlEgrIfIndex
is read, the interface name string is converted to an ifIndex (zero if
the interface name string is the empty string, or cannot be converted
to an ifIndex), and the ifIndex is returned.
Only one of tmnxOamIcmpPingCtlNhAddress, tmnxOamIcmpPingCtlEgrIfIndex,
tmnxOamIcmpPingCtlEgrIfName, or tmnxOamIcmpPingCtlBypassRouting may be
set to a non-default value. Otherwise, 'inconsistentValue' is
returned.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.11.1.18.1.10 |
tmnxOamAncpTestCtlTableDefines the Alcatel-Lucent SROS OAM ANCP Control Table for providing,
via SNMP, the capability of performing Alcatel-Lucent SROS OAM
'ANCP loopback' test operations.
The results of these tests are stored in the tmnxOamPingResultsTable
and the tmnxOamAncpTestHistoryTable. There will be no entries for
these tests in the tmnxOamPingHistoryTable. SEQUENCE OF TmnxOamAncpTestCtlEntry .1.3.6.1.4.1.6527.3.1.2.11.1.19 |
tmnxOamAncpTestCtlEntryDefines an entry in the tmnxOamAncpTestCtlTable. The first index
element, tmnxOamPingCtlOwnerIndex, is of type SnmpAdminString,
a textual convention that allows for use of the SNMPv3
View-Based Access Control Model (RFC 2575 [11], VACM)
and allows a management application to identify its entries.
The second index, tmnxOamPingCtlTestIndex, enables the same
management application to have multiple outstanding requests. TmnxOamAncpTestCtlEntry .1.3.6.1.4.1.6527.3.1.2.11.1.19.1 |
tmnxOamAncpTestTargetThe object tmnxOamAncpTestTarget specifies how to interpret the
value of the object tmnxOamAncpTestTargetId.
If set to 'subscriberId', the object tmnxOamAncpTestTargetId
is a printable character string which contains the subscriber-id.
If set to 'ancpString', the object tmnxOamAncpTestTargetId
is a printable character string which contains the ancp-string.
If set to 'none', no value is specified, the object
tmnxOamAncpTestTargetId is an empty string, and no ancp-loopback test
can be performed.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.11.1.19.1.1 |
tmnxOamAncpTestTargetIdThe object tmnxOamAncpTestTargetId contains the ID of the subscriber
for which the ANCP loopback test must be performed. The content of the
field is interpreted as being a subscriber-id of max 32 chars
(in case the object tmnxOamAncpTestTarget is set to 'subscriberId'),
or as being an acnp-string of max 63 chars (in case the object
tmnxOamAncpTestTarget is set to 'ancpString').rw DisplayString .1.3.6.1.4.1.6527.3.1.2.11.1.19.1.2 |
tmnxOamAncpTestcountThe value of tmnxOamAncpTestcount specifies the number of messages the
access node will use to test the circuit.
If set to 0, the number of messages will be determined by the
access node. Following settings are allowed:
tmnxOamAncpTestcount tmnxOamAncpTestTimeout
0 0
1..32 0
1..32 1..255rw INTEGER (0 .. 32) .1.3.6.1.4.1.6527.3.1.2.11.1.19.1.3 |
tmnxOamAncpTestTimeoutThe value of tmnxOamAncpTestTimeout specifies the number of seconds
the controlling node will wait for a reply. This timeout value
is also sent to the access node. If set to 0, the access node will
pick a default value, while the control node will assume a value
of 255 seconds.
Following settings are allowed:
tmnxOamAncpTestcount tmnxOamAncpTestTimeout
0 0
1..32 0
1..32 1..255rw INTEGER (0 .. 255) UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.11.1.19.1.4 |
tmnxOamAncpTestHistoryTableDefines a table for storing the results of an OAM ANCP test.
The number of entries in this table for a test is limited
to the results of 3 runs.
An entry in this table is created when the result of an OAM
ANCP test is determined. An entry is removed from this table when
its corresponding tmnxOamPingCtlEntry is deleted. SEQUENCE OF TmnxOamAncpTestHistoryEntry .1.3.6.1.4.1.6527.3.1.2.11.1.20 |
tmnxOamAncpTestHistoryEntryDefines an entry in the tmnxOamAncpTestHistoryTable. The first two
index elements identify the tmnxOamPingCtlEntry that a
tmnxOamAncpTestHistoryTable belongs to. The third index identifies
a specific run of the OAM test. The fourth index element selects a
single OAM ANCP test result. TmnxOamAncpTestHistoryEntry .1.3.6.1.4.1.6527.3.1.2.11.1.20.1 |
tmnxOamAncpHistoryIndexAn entry in this table is created when the result of a OAM
ANCP test is determined. The initial 2 instance
identifier index values identify the tmnxOamPingCtlEntry
that This ANCP test result belongs
to. The tmnxOamAncpHistoryIndex element selects a single OAM
probe result.
The agent starts assigning tmnxOamAncpHistoryIndex values at 1
and wraps after exceeding the maximum possible value as defined by
the limit of this object. Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.1.20.1.1 |
tmnxOamAncpHistoryAncpStringThe object tmnxOamAncpHistoryAncpString indicates the value of the
ancp-string used while running this ANCP test.ro DisplayString .1.3.6.1.4.1.6527.3.1.2.11.1.20.1.2 |
tmnxOamAncpHistoryAccNodeCodeThe object tmnxOamAncpHistoryAccNodeCode indicates, if different
from 0, the return code received from the ANCP access node.
The value of this field corresponds to the errorcodes defined in the
draft-wadhwa-gsmp-l2control-configuration-01:
- 0x500 Specified access line does not exist
- 0x501 Loopback test timed out
- 0x502 Reserved
- 0x503 DSL line status showtime
- 0x504 DSL line status idle
- 0x505 DSL line status silent
- 0x506 DSL line status training
- 0x507 DSL line integrity error
- 0x508 DSLAM resource not available
- 0x509 Invalid test parameterro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.1.20.1.3 |
tmnxOamAncpHistoryAccNodeResultThe object tmnxOamAncpHistoryAccNodeResult indicates, if different
from 0, the return result received from the ANCP access node.
The value of this field corresponds to the result codes defined in the
draft-wadhwa-gsmp-l2control-configuration-01:
{
- 1: NoSuccessAck
- 2: AckAll
- 3: Success
- 4: Failure
- 5: More
- 6: ReturnReceipt
}ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.1.20.1.4 |
tmnxOamAncpHistoryAccNodeRspStrThe object tmnxOamAncpHistoryAccNodeRspStr indicates, if different
from the empty string, the OAM-loopback-Test-Response-String received
from the access node, as reply to the requested test.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.1.20.1.5 |
tmnxOamP2mpLspPingCtlTableDefines the Alcatel-Lucent SROS OAM P2MP LSP ping Control Table for
providing, via SNMP, the capability of performing Alcatel-Lucent
SROS OAM 'p2mpLspPing' test operations. The results of these
tests are stored in the tmnxOamPingResultsTable and the
tmnxOamPingHistoryTable. OAM 'p2mpLspPing' test operation is
based on IETF draft-ietf-mpls-p2mp-lsp-ping-06 SEQUENCE OF TmnxOamP2mpLspPingCtlEntry .1.3.6.1.4.1.6527.3.1.2.11.1.21 |
tmnxOamP2mpLspPingCtlEntryDefines an entry in the tmnxOamP2mpLspPingCtlTable. The first index
element, tmnxOamPingCtlOwnerIndex, is of type SnmpAdminString,
a textual convention that allows for use of the SNMPv3
View-Based Access Control Model (RFC 2575 [11], VACM)
and allows a management application to identify its entries.
The second index, tmnxOamPingCtlTestIndex, enables the same
management application to have multiple outstanding requests. TmnxOamP2mpLspPingCtlEntry .1.3.6.1.4.1.6527.3.1.2.11.1.21.1 |
tmnxOamP2mpLspPingCtlLspNameThe value of tmnxOamP2mpLspPingCtlLspName specifies the administrative
name of the target RSVP P2MP Labeled Switch Path (LSP) for this
OAM P2MP LSP Ping test. The LSP name must be unique within the base
router instance.
The objects tmnxOamP2mpLspPingCtlLspName and
tmnxOamP2mpLspPingCtlP2MPId are mutually exclusive.
An 'inconsistentValue' error is returned when attempting to set
the value of the tmnxOamP2mpLspPingCtlLspName object to a non default
value while the value of the tmnxOamP2mpLspPingCtlP2MPId object is
already set to non default value.
An 'inconsistentValue' error is returned when the value of
tmnxOamPingCtlAdminStatus is set to 'enabled' if both the value of
tmnxOamP2mpLspPingCtlLspName and the value of
tmnxOamP2mpLspPingCtlP2MPId objects are set to default values.rw TLNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.11.1.21.1.1 |
tmnxOamP2mpLspPingCtlInstNameThis parameter identifies an instance of a P2MP LSP, either a primary
or secondary instance of a RSVP P2MP LSP Tree.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.11.1.21.1.2 |
tmnxOamP2mpLspPingCtlTtlSpecifies the outermost label time-to-live value. This is an optional
parameter for RSVP P2MP LSP. This parameter is not applicable for LDP
P2MP LSPrw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.1.21.1.3 |
tmnxOamP2mpLspPingCtlP2MPIdThe value of tmnxOamP2mpLspPingCtlP2MPId specifies the identifier
of a Point to Multipoint (LDP P2MP) Label Switch Path (LSP) for this
OAM P2MP LSP ping test.
The objects tmnxOamP2mpLspPingCtlP2MPId and
tmnxOamP2mpLspPingCtlLspName are mutually exclusive.
An 'inconsistentValue' error is returned when attempting to set
the value of the tmnxOamP2mpLspPingCtlP2MPId object to a non default
value while the value of the tmnxOamP2mpLspPingCtlLspName object is
already set to non default value.
An 'inconsistentValue' error is returned when the value of
tmnxOamPingCtlAdminStatus is set to 'enabled' if both the value of
tmnxOamP2mpLspPingCtlP2MPId and the value of
tmnxOamP2mpLspPingCtlLspName objects are set to default values.rw Unsigned32 (0 | 1..4294967295) .1.3.6.1.4.1.6527.3.1.2.11.1.21.1.4 |
tmnxOamP2mpLspPingCtlSrcAddrTypeThe value of tmnxOamP2mpLspPingCtlSrcAddrType specifies the address
type of tmnxOamP2mpLspPingCtlSrcAddr.
When tmnxOamPingCtlAdminStatus is to set to 'enable', objects
tmnxOamP2mpLspPingCtlSrcAddrType, tmnxOamP2mpLspPingCtlSrcAddr,
tmnxOamP2mpLspPingCtlGrpAddrType, and tmnxOamP2mpLspPingCtlGrpAddr
should all have default values or should all have non-default values.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.11.1.21.1.5 |
tmnxOamP2mpLspPingCtlSrcAddrThe value of tmnxOamP2mpLspPingCtlSrcAddr specifies the source address
of a Point to Multipoint (LDP P2MP) Label Switch Path (LSP) for this
OAM P2MP LSP ping test. This IP address must be valid unicast address.
The objects tmnxOamP2mpLspPingCtlSrcAddr and tmnxOamP2mpLspPingCtlP2MPId
are mutually exclusive.
When tmnxOamPingCtlAdminStatus is to set to 'enable', objects
tmnxOamP2mpLspPingCtlSrcAddrType, tmnxOamP2mpLspPingCtlSrcAddr,
tmnxOamP2mpLspPingCtlGrpAddrType, and tmnxOamP2mpLspPingCtlGrpAddr
should all have default values or should all have non-default values.rw InetAddress .1.3.6.1.4.1.6527.3.1.2.11.1.21.1.6 |
tmnxOamP2mpLspPingCtlGrpAddrTypeThe value of tmnxOamP2mpLspPingCtlGrpAddrType specifies the address
type of tmnxOamP2mpLspPingCtlGrpAddr.
When tmnxOamPingCtlAdminStatus is to set to 'enable', objects
tmnxOamP2mpLspPingCtlSrcAddrType, tmnxOamP2mpLspPingCtlSrcAddr,
tmnxOamP2mpLspPingCtlGrpAddrType, and tmnxOamP2mpLspPingCtlGrpAddr
should all have default values or should all have non-default values.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.11.1.21.1.7 |
tmnxOamP2mpLspPingCtlGrpAddrThe value of tmnxOamP2mpLspPingCtlGrpAddr specifies the group address
of a Point to Multipoint (LDP P2MP) Label Switch Path (LSP) for this
OAM P2MP LSP ping test. This IP address must be valid multicast
address.
The objects tmnxOamP2mpLspPingCtlGrpAddr and
tmnxOamP2mpLspPingCtlP2MPId are mutually exclusive.
When tmnxOamPingCtlAdminStatus is to set to 'enable', objects
tmnxOamP2mpLspPingCtlSrcAddrType, tmnxOamP2mpLspPingCtlSrcAddr,
tmnxOamP2mpLspPingCtlGrpAddrType, and tmnxOamP2mpLspPingCtlGrpAddr
should all have default values or should all have non-default values.rw InetAddress .1.3.6.1.4.1.6527.3.1.2.11.1.21.1.8 |
tmnxOamP2mpLspPingIPAddressTableDefines the Alcatel-Lucent SROS OAM P2MP LSP ping IP Address Table for
providing, via SNMP, the capability of performing Alcatel-Lucent
SROS OAM 'p2mpLspPing' test operations.
This table provides the ability to add multiple IP Address
destinations for the 'p2mpLspPing' test.
The results of these tests are stored in the tmnxOamPingResultsTable
and the tmnxOamPingHistoryTable. SEQUENCE OF TmnxOamP2mpLspPingIPAddressEntry .1.3.6.1.4.1.6527.3.1.2.11.1.22 |
tmnxOamP2mpLspPingIPAddressEntryDefines an entry in the tmnxOamP2mpLspPingIPAddressTable.
The first index element, tmnxOamPingCtlOwnerIndex, is of type
SnmpAdminString, a textual convention that allows for use of
the SNMPv3 View-Based Access Control Model (RFC 2575 [11], VACM)
and allows a management application to identify its entries.
The second index, tmnxOamPingCtlTestIndex, enables the same
management application to have multiple outstanding requests.
The third and fourth index, tmnxOamP2mpLspPingCtlIpAddrType and
tmnxOamP2mpLspPingCtlIpAddr enables the same management application
to have multiple IP address destinations. TmnxOamP2mpLspPingIPAddressEntry .1.3.6.1.4.1.6527.3.1.2.11.1.22.1 |
tmnxOamP2mpLspPingCtlIpAddrIndexThe object tmnxOamP2mpLspPingCtlIpAddrIndex specifies the numerical
row-order in the table. Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.1.22.1.1 |
tmnxOamP2mpLspPingCtlIpRowStatusThe object tmnxOamP2mpLspPingCtlIpRowStatus allows for the creation
and deletion of rows in the tmnxOamP2mpLspPingIPAddressTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.1.22.1.2 |
tmnxOamP2mpLspPingCtlIpAddrTypeThe value of tmnxOamP2mpLspPingCtlIpAddrType specifies the type
of Internet address stored in tmnxOamP2mpLspPingCtlIpAddr.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.11.1.22.1.3 |
tmnxOamP2mpLspPingCtlIpAddrThe value of tmnxOamP2mpLspPingCtlIpAddr specifies a remote Internet
address to send P2MP LSP Ping packets for a particular test.rw InetAddress .1.3.6.1.4.1.6527.3.1.2.11.1.22.1.4 |
tmnxOamEthCfmPingCtlTabletmnxOamEthCfmPingCtlTable contains Ethernet CFM-specific configuration
information for 'ethCfmLoopback', 'ethCfmTwoWayDelay', and
'ethCfmTwoWaySlm' tests.
This table extends the tmnxOamPingCtlTable. A row is automatically
created in this table when a row is created in tmnxOamPingCtlTable with
tmnxOamPingCtlTestMode set to 'ethCfmLoopback', 'ethCfmTwoWayDelay', or
'ethCfmTwoWaySlm'. Deleting a row in tmnxOamPingCtlTable automatically
deletes the row (if any) with the same index values in
tmnxOamEthCfmPingCtlTable.
Test results are stored in tmnxOamPingResultsTable and
tmnxOamPingHistoryTable. SEQUENCE OF TmnxOamEthCfmPingCtlEntry .1.3.6.1.4.1.6527.3.1.2.11.1.23 |
tmnxOamEthCfmPingCtlEntrytmnxOamEthCfmPingCtlEntry defines an entry in the
tmnxOamEthCfmPingCtlTable. Each index is an object in
tmnxOamPingCtlTable. TmnxOamEthCfmPingCtlEntry .1.3.6.1.4.1.6527.3.1.2.11.1.23.1 |
tmnxOamEthCfmPingCtlTgtMacAddrThe value of tmnxOamEthCfmPingCtlTgtMacAddr specifies the target MAC
address for the test.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.1.23.1.1 |
tmnxOamEthCfmPingCtlSrcMdIndexThe value of tmnxOamEthCfmPingCtlSrcMdIndex specifies the source CFM
maintenance domain index for the test. Zero is the null CFM
maintenance domain index.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.1.23.1.2 |
tmnxOamEthCfmPingCtlSrcMaIndexThe value of tmnxOamEthCfmPingCtlSrcMaIndex specifies the source CFM
maintenance association index for the test. Zero is the null CFM
maintenance association index.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.1.23.1.3 |
tmnxOamEthCfmPingCtlSrcMepIdThe value of tmnxOamEthCfmPingCtlSrcMepId specifies the source
Maintenance association End Point Identifier (MEP ID) for the test.
Zero is the null MEP ID.rw Dot1agCfmMepIdOrZero .1.3.6.1.4.1.6527.3.1.2.11.1.23.1.4 |
tmnxOamTraceRouteObjs OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.11.2 |
tmnxOamTraceRouteNotifyObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.11.2.1 |
tmnxOamTrMaxConcurrentRequestsThe maximum number of concurrent active trace route requests
that are allowed within an agent implementation. A value
of 0 for this object implies that there is no limit for
the number of concurrent active requests in effect.rw Unsigned32 UNITS "requests" .1.3.6.1.4.1.6527.3.1.2.11.2.2 |
tmnxOamTrCtlTableDefines the Alcatel-Lucent SROS OAM Trace Route Control Table for
providing the capability of invoking OAM trace route tests from
SNMP. The results of trace route operations can be stored in
the tmnxOamTrResultsTable, tmnxOamTrProbeHistoryTable, and
the tmnxOamTrHopsTable. SEQUENCE OF TmnxOamTrCtlEntry .1.3.6.1.4.1.6527.3.1.2.11.2.3 |
tmnxOamTrCtlEntryDefines an entry in the tmnxOamTrCtlTable. The first
index element, tmnxOamTrCtlOwnerIndex, is of type
SnmpAdminString, a textual convention that allows for
use of the SNMPv3 View-Based Access Control Model
(RFC 2575 [11], VACM) and allows an management
application to identify its entries. The second index,
tmnxOamTrCtlTestIndex (also an SnmpAdminString),
enables the same management application to have
multiple requests outstanding. TmnxOamTrCtlEntry .1.3.6.1.4.1.6527.3.1.2.11.2.3.1 |
tmnxOamTrCtlOwnerIndexTo facilitate the provisioning of access control by a
security administrator using the View-Based Access
Control Model (RFC 2575, VACM) for tables in which
multiple users may need to independently create or
modify entries, the initial index is used as an 'owner
index'. Such an initial index has a syntax of
SnmpAdminString, and can thus be trivially mapped to a
security name or group name as defined in VACM, in
accordance with a security policy.
When used in conjunction with such a security policy
all entries in the table belonging to a particular user
(or group) will have the same value for this initial
index. For a given user's entries in a particular
table, the object identifiers for the information in
these entries will have the same subidentifiers (except
for the 'column' subidentifier) up to the end of the
encoded owner index. To configure VACM to permit access
to this portion of the table, one would create
vacmViewTreeFamilyTable entries with the value of
vacmViewTreeFamilySubtree including the owner index
portion, and vacmViewTreeFamilyMask 'wildcarding' the
column subidentifier. More elaborate configurations
are possible. SnmpAdminString .1.3.6.1.4.1.6527.3.1.2.11.2.3.1.1 |
tmnxOamTrCtlTestIndexThe test name index of a Alcatel-Lucent SROS OAM Trace Route test.
This is locally unique, within the scope of a tmnxOamTrCtlOwnerIndex. SnmpAdminString .1.3.6.1.4.1.6527.3.1.2.11.2.3.1.2 |
tmnxOamTrCtlRowStatusThis object allows entries to be created and deleted
in the tmnxOamTrCtlTable. Deletion of an entry in
this table results in all corresponding (same
tmnxOamTrCtlOwnerIndex and tmnxOamTrCtlTestIndex
index values) tmnxOamTrResultsTable,
tmnxOamTrProbeHistoryTable, and tmnxOamTrHopsTable
entries being deleted.
The values for configuration objects required for the type of
test specified in tmnxOamTrCtlTestMode MUST be specified
prior to a transition to active(1) state being
accepted.
Activation of an Alcatel-Lucent SROS OAM Trace Route operation is
controlled via tmnxOamTrCtlAdminStatus and not
by transitioning of this object's value to active(1).
Transitions in and out of active(1) state are not
allowed while an entry's tmnxOamTrResultsOperStatus
is active(1) with the exception that deletion of
an entry in this table by setting its RowStatus
object to destroy(6) will stop an active Alcatel-Lucent
SROS OAM Trace Route operation.
The operational state of an Alcatel-Lucent SROS OAM Trace Route
operation can be determined by examination of the corresponding
tmnxOamTrResultsOperStatus object.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.2.3.1.3 |
tmnxOamTrCtlStorageTypeThe storage type for this conceptual row.
Conceptual rows having the value 'permanent' need not
allow write-access to any columnar objects in the row.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.2.3.1.4 |
tmnxOamTrCtlDescrThe purpose of this object is to provide a descriptive name of
the Alcatel-Lucent SROS OAM Trace Route test.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.3.1.5 |
tmnxOamTrCtlTestModeSpecifies the type of Alcatel-Lucent SROS OAM Trace Route test defined
by this entry. The configuration parameters unique to a specific
test type are to be found in a sparsely dependent extension table
for that test type.
p2mpLspTrace is supported for non-SAA tests only.
ethCfmLinkTrace is supported for SAA tests only.
This is a required parameter.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.11.2.3.1.6 |
tmnxOamTrCtlAdminStatusReflects the desired state that a tmnxOamTrCtlEntry
should be in:
enabled(1) - Attempt to activate the test as defined by
this tmnxOamTrCtlEntry.
disabled(2) - Deactivate the test as defined by this
tmnxOamTrCtlEntry.
If tmnxOamTrCtlSAA has the value 'true' and tmnxOamSaaCtlAdminStatus
has the value 'outOfService', an attempt to set this object to
'enabled' will fail with an inconsistentValue error.
Refer to the corresponding tmnxOamTrResultsOperStatus to
determine the operational state of the test defined by
this entry.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.11.2.3.1.7 |
tmnxOamTrCtlFcNameThe value of tmnxOamTrCtlFcName specifies the forwarding class to be
used when launching the probe(s). The forwarding class name must be
present in the index column of TIMETRA-QOS-MIB::tFCNameTable. This
object is optional.
As shown in the following table
a) this object is applicable to a subset of the test types, and
b) the default forwarding class depends on the test type.
tmnxOamTrCtlTestMode Applicable? Default
-
ethCfmLinkTrace yes 'nc'
ldpTreeTrace yes 'be'
lspTraceRoute yes 'be'
macTraceRoute yes 'be'
p2mpLspTrace yes 'be'
vccvTraceRoute yes 'be'
vprnTraceRoute yes 'be'
otherwise no N/A
For 'ethCfmLinkTrace', the forwarding class depends on whether the
request is configured to egress on a network port or an access port.
In the network port case, the forwarding class is the forwarding class
of the pseudowire. In the access port case, the forwarding class is
that of the SAP's egress encapsulation policy.
For 'lspTraceRoute' this is the forwarding class of the LSP tunnel.
For 'macTraceRoute' this is the forwarding class of the SDP
encapsulation.
For 'p2mpLspTrace' this is the forwarding class of the P2MP LSP tree.
If forwarding classes are mapped by the applicable QoS policy, the
probe(s) may be launched using a different forwarding class than the
forwarding class specified by this object.rw TFCName (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.3.1.8 |
tmnxOamTrCtlProfileThe value of tmnxOamTrCtlProfile specifies the profile to be used
with the forwarding class specified in tmnxOamTrCtlFcName. This
object is optional.
As shown in the following table
a) this object is applicable to a subset of the test types, and
b) the default profile value depends on the test type.
tmnxOamTrCtlTestMode Applicable? Default
-
ethCfmLinkTrace yes 'in(1)'
ldpTreeTrace yes 'out(2)'
lspTraceRoute yes 'out(2)'
macTraceRoute yes 'out(2)'
p2mpLspTrace yes 'out(2)'
vccvTraceRoute yes 'out(2)'
vprnTraceRoute yes 'out(2)'
otherwise no N/Arw TProfile (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.3.1.9 |
tmnxOamTrCtlTargetIpAddressSpecifies the Ipv4 address to be used as the destination for
performing an OAM Trace Route operation. This parameter is
not used by 'macTraceRoute' or 'lspTraceRoute' or 'mcastTraceRoute'.
This parameter is required by 'vprnTraceRoute'.
This object was obsoleted in release 4.0 and replaced with
InetAddress objects tmnxOamTrCtlTgtAddrType and
tmnxOamTrCtlTgtAddress.rwobsolete IpAddress .1.3.6.1.4.1.6527.3.1.2.11.2.3.1.10 |
tmnxOamTrCtlServiceIdThe value of tmnxOamTrCtlServiceId specifies the service ID of the
service being tested.
The applicability of tmnxOamTrCtlServiceId varies with the test type,
as shown in the following table.
tmnxOamTrCtlTestMode Applicability Related Virtual Router Object
- -
'icmpTraceRoute' optional tmnxOamTrCtlVRtrID
'macTraceRoute' mandatory none
'mcastTraceRoute' optional tmnxOamMcastTrCtlVRtrID
'vprnTraceRoute' mandatory none
otherwise not applicable none
When tmnxOamTrCtlServiceId is mandatory, a non-zero value must be
provided.
When tmnxOamTrCtlServiceId is optional, it is used to specify a VPRN
service. The test must use the VPRN service's virtual router.
When a related virtual router object is shown, the interaction is
described in the DESCRIPTION clause of the listed object.
Service IDs larger than 2147483647 are internal, so they are excluded
from the range.
The default value is the null service ID.rw TmnxServId .1.3.6.1.4.1.6527.3.1.2.11.2.3.1.11 |
tmnxOamTrCtlDataSizeThe value of tmnxOamTrCtlDataSize specifies the size of the data
portion of the Trace Route request, in octets. The size of the message
does not include the SDP encapsulation, VC-Label (if applied) or any
DLC headers or trailers. This parameter is optional.
When the OAM message is encapsulated in an IP/GRE SDP, the
IP 'DF' (Don't Fragment) bit is set. If any segment of the path
between the sender and receiver cannot handle the message size,
the message is discarded. MPLS LSPs are not expected to fragment
the message either, as the message contained in the LSP is not an
IP packet.
When the data size is specified as 1, it is interpreted as the minumum
valid data size for the trace type.
The minimum data size (in octets) varies with tmnxOamTrCtlTestMode, as
follows:
'lspTraceRoute' with multipath DSMap 140
'lspTraceRoute' otherwise 104
'macTraceRoute' 1
'p2mpLspTrace' 132
'vccvTraceRoute', FEC 128 pseudowire 88
'vccvTraceRoute', FEC 129 pseudowire 120
'vprnTraceRoute' 1
This parameter is not used by 'ethCfmLinkTrace', 'icmpTraceRoute',
'ldpTreeTrace', or 'mcastTraceRoute'.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.3.1.12 |
tmnxOamTrCtlTimeOutSpecifies the time-out value, in seconds, for an Alcatel-Lucent SROS
OAM Trace Route request. This parameter is optional.
For 'ethCfmLinkTrace', this is the time out for the whole test.
The minimum, maximum, and default values of this object vary with
tmnxOamTrCtlTestMode, as follows:
'icmpTraceRoute' : N/A N/A N/A
'ethCfmLinkTrace': 1 10 5
otherwise : 1 60 3
If tmnxOamTrCtlTestMode is 'ethCfmLinkTrace', the value of
tmnxOamTrCtlTimeOut must be less than or equal to the value of
tmnxOamTrCtlInterval.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.3.1.13 |
tmnxOamTrCtlProbesPerHopSpecifies the number of times to reissue an Alcatel-Lucent SROS OAM
Trace Route request with the same time-to-live (TTL) value.
This parameter is optional.
This parameter is not configurable for 'icmpTraceRoute';
a default value of 3 is used.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.3.1.14 |
tmnxOamTrCtlMaxTtlThe value of tmnxOamTrCtlMaxTtl specifies the maximum time-to-live
value. This parameter is optional.
When tmnxOamTrCtlMaxTtl is not explicitly specified, the agent
defaults the value based on the 'tmnxOamTrCtlTestMode'.
In the case of 'lspTraceRoute' the default is set to 30.
In the case of 'icmpTraceRoute' the default is set to 30.
In the case of 'ldpTreeTrace' the default is set to 30.
In the case of 'vccvTraceRoute' the default is set to 8.
In the case of 'p2mplspTrace' the default is set to 30.
In the case of 'ethCfmLinkTrace' the default is set to 64.
Otherwise the default is set to 4.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.3.1.15 |
tmnxOamTrCtlInitialTtlThe value of tmnxOamTrCtlInitialTtl specifies the initial TTL
value to use. This enables bypassing the initial (often well known)
portion of a path. This parameter is optional.
This parameter is not configurable for 'icmpTraceRoute'; the
default value 1 is used. This parameter is not used with
'ethCfmLinkTrace'.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.3.1.16 |
tmnxOamTrCtlDSFieldThe value of tmnxOamTrCtlDSField specifies the value to load in the
Type of Service (TOS) octet or the Traffic Class (TC) octet of the
launched ICMP echo request(s). The TOS octet is a field in the IPv4
packet header. The TC octet is a field in the IPv6 packet header.
The value in the TOS or TC octet may influence the route, latency,
and/or probability of loss for the echo request (and, by inference, for
the associated data flow).
This object is supported when tmnxOamTrCtlTestMode is 'icmpTraceRoute'.
Otherwise, it is ignored.
This object is optional.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.3.1.17 |
tmnxOamTrCtlMaxFailuresThe value of tmnxOamTrCtlMaxFailures specifies the maximum number of
consecutive timeouts allowed before terminating a trace route test.
This object is optional.
As shown in the following table
a) this object is applicable to a subset of the test types, and
b) the default value and upper bound depend on the test type.
tmnxOamTrCtlTestMode Applicable? Default Upper Bound
-
'icmpTraceRoute' yes 90 90
'lspTraceRoute' yes 5 255
'p2mpLspTrace' yes 5 10
'vccvTraceRoute' yes 5 255
otherwise no N/A N/A
In the 'icmpTraceRoute' case, changing the tmnxOamTrCtlMaxFailures
value away from the default is not supported.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.3.1.18 |
tmnxOamTrCtlIntervalThe value of tmnxOamTrCtlInterval specifies the number of seconds
to wait before repeating an Alcatel-Lucent SROS OAM Trace Route test as
defined by the value of the various objects in the corresponding row.
This parameter is optional.
The number of hops in a single Alcatel-Lucent SROS OAM Trace Route test
is determined by the value of the corresponding
tmnxOamTrCtlProbesPerHop object. After a single test completes,
the number of seconds as defined by the value of tmnxOamTrCtlInterval
MUST elapse before the next Alcatel-Lucent SROS OAM Trace Route test is
started.
The applicability, range, and default value of this object vary with
tmnxOamTrCtlTestMode, as shown in the following table.
tmnxOamTrCtlTestMode Min Max Default
'ethCfmLinkTrace' 1 10 5
'icmpTraceRoute' not applicable
'vccvTraceRoute' 1 255 1
otherwise 1 10 1rw Unsigned32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.11.2.3.1.19 |
tmnxOamTrCtlMaxRowsThe value of tmnxOamTrCtlMaxRows specifies the maximum number of
entries allowed in the tmnxOamTrProbeHistoryTable. The oldest entry
in the tmnxOamTrProbeHistoryTable is removed to allow the addition
of an new entry once the number of rows in the
tmnxOamTrProbeHistoryTable reaches this value.
Old entries are not removed when a new test is started. Entries are
added to the tmnxOamTrProbeHistoryTable until tmnxOamTrCtlMaxRows
is reached before entries begin to be removed.
A value of 0 for this object disables creation of
tmnxOamTrProbeHistoryTable entries.
This object was obsoleted in release 6.0R17.rwobsolete Unsigned32 UNITS "rows" .1.3.6.1.4.1.6527.3.1.2.11.2.3.1.20 |
tmnxOamTrCtlTrapGenerationThe value of tmnxOamTrCtlTrapGeneration specifies when and if to
generate a notification for this entry:
pathChange(0) - Generate a tmnxOamTrPathChange
notification when the current path varies from a previously
determined path.
testFailure(1) - Generate a tmnxOamTrTestFailed notification when
the full path to a target can't be determined.
testCompletion(2) - Generate a tmnxOamTrTestCompleted notification
when the test is completed.rw Bits .1.3.6.1.4.1.6527.3.1.2.11.2.3.1.21 |
tmnxOamTrCtlCreateHopsEntriesThe value of tmnxOamTrCtlCreateHopsEntries specifies whether or not
the current path for an Alcatel-Lucent SROS OAM Trace Route test is kept
in the tmnxOamTrHopsTable on a per hop basis.
tmnxOamTrHopsTable provides a current path topology based on the
results of the OAM Trace Route tests. If this feature is not
supported tmnxOamTrCtlCreateHopsEntries will always be set to false(2)
and any attempt to change its value to true(1) will be denied.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.2.3.1.22 |
tmnxOamTrCtlSAAThe value of tmnxOamTrCtlSAA specifies if this test is an SAA test
(Service Assurance Agent; 'true'), or an OAM test ('false'). If
there is a tmnxOamSaaCtlTable row with the specified index values,
'true' is returned. Otherwise, 'false' is returned.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.2.3.1.23 |
tmnxOamTrCtlRunsThe value of tmnxOamTrCtlRuns indicates the number of times
this OAM trace route test has been executed.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.11.2.3.1.24 |
tmnxOamTrCtlFailuresThe value of tmnxOamTrCtlFailures indicates the number of times
this OAM trace route test has failed.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.11.2.3.1.25 |
tmnxOamTrCtlLastRunResultThe value of tmnxOamTrCtlLastRunResult indicates the completion
status the last time this test was executed. If this OAM test is
currently in progress, this object indicates the result of the
previous test run, if any.ro TmnxOamTestResult .1.3.6.1.4.1.6527.3.1.2.11.2.3.1.26 |
tmnxOamTrCtlLastChangedThe value of tmnxOamTrCtlLastChanged indicates the time the
value of a settable object in this row was last changed.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.2.3.1.27 |
tmnxOamTrCtlVRtrIDThe value of tmnxOamTrCtlVRtrID specifies the virtual router to be
used for the test. The value specified must be the index of an active
row in TIMETRA-VRTR-MIB::vRtrConfTable.
This object is applicable if tmnxOamTrCtlTestMode is 'icmpTraceRoute'.
When directing an 'icmpTraceRoute' test to use a virtual router
associated with a VPRN service, the virtual router can be specified
using tmnxOamTrCtlVRtrID (with the VPRN's virtual router number) or
tmnxOamTrCtlServiceId (with the VPRN's service number).
tmnxOamTrCtlServiceId is preferred, because service numbers are
constant across an SROS reboot (while virtual routers may be
renumbered). If non-default values are specified for both
tmnxOamTrCtlVRtrID and tmnxOamTrCtlServiceId,
tmnxOamTrCtlServiceId is used.
Setting this object is optional.rw TmnxVRtrID (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.3.1.28 |
tmnxOamTrCtlTgtAddrTypeThe value of tmnxOamTrCtlTgtAddrType specifies the type of host
address to be used as the destination for performing a OAM Trace
Route operation. Only 'ipv4', 'ipv6' and 'dns' address types are
supported.
This object indicates the type of address stored in the
corresponding tmnxOamTrCtlTgtAddress object.
The 'dns' address type is valid only for 'icmpTraceRoute'.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.3.1.29 |
tmnxOamTrCtlTgtAddressThe value of tmnxOamTrCtlTgtAddress specifies the IP host address to
be used as the destination for performing an OAM Trace Route
operation. The host address type is determined by the value of the
corresponding tmnxOamTrCtlTgtAddrType object.
This parameter is required by 'vprnTraceRoute' and 'icmpTraceRoute'.
This parameter is not used by 'macTraceRoute', 'lspTraceRoute',
'mcastTraceRoute', 'vccvTraceRoute', 'p2mpLspPing', or
'ethCfmLinkTrace'.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.3.1.30 |
tmnxOamTrCtlSrcAddrTypeThe value of tmnxOamTrCtlSrcAddrType specifies the type of host
address to be used as the source for performing an OAM traceroute
operation. This object indicates the type of address stored in the
corresponding tmnxOamTrCtlSrcAddress object. Only 'ipv4' and 'ipv6'
address types are supported.
This object is valid only when the tmnxOamTrCtlTestMode has a
value of 'icmpTraceRoute' or 'lspTraceRoute'.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.3.1.31 |
tmnxOamTrCtlSrcAddressThe value of tmnxOamTrCtlSrcAddress specifies the IP host address to
be used as the source for performing an OAM Trace Route operation.
The host address type is determined by the value of the corresponding
tmnxOamTrCtlSrcAddrType object. This is an optional parameter.
This object is valid only when the tmnxOamTrCtlTestMode has a
value of 'icmpTraceRoute' or 'lspTraceRoute'.rw InetAddress .1.3.6.1.4.1.6527.3.1.2.11.2.3.1.32 |
tmnxOamTrCtlWaitMilliSecThe value of tmnxOamTrCtlWaitMilliSec specifies the time in
milliseconds to wait for a response before sending the next
probe.
This object is valid only for 'icmpTraceRoute' tests.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.3.1.33 |
tmnxOamTrResultsTableDefines the Alcatel-Lucent SROS OAM Trace Route Test Results
Table for keeping track of the status of a tmnxOamTrCtlEntry.
An entry is added to the tmnxOamTrResultsTable when an
tmnxOamTrCtlEntry is started by successful transition
of its tmnxOamTrCtlAdminStatus object to enabled(1).
An entry is removed from the tmnxOamTrResultsTable when
its corresponding tmnxOamTrCtlEntry is deleted. SEQUENCE OF TmnxOamTrResultsEntry .1.3.6.1.4.1.6527.3.1.2.11.2.4 |
tmnxOamTrResultsEntryDefines an entry in the tmnxOamTrResultsTable. The
first two indexes of the tmnxOamTrResultsTable are the
same as the tmnxOamTrCtlTable in order for a tmnxOamTrResultsEntry
to correspond to the tmnxOamTrCtlEntry that caused it to
be created. The third index allows a history of test runs
to be stored. TmnxOamTrResultsEntry .1.3.6.1.4.1.6527.3.1.2.11.2.4.1 |
tmnxOamTrResultsOperStatusReflects the operational state of a tmnxOamTrCtlEntry:
enabled(1) - Test is active.
disabled(2) - Test has stopped.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.11.2.4.1.1 |
tmnxOamTrResultsCurHopCountReflects the current TTL value (range from 0 to
255) for an Alcatel-Lucent SROS OAM Trace Route operation.
Maximum TTL value is determined by tmnxOamTrCtlMaxTtl.
Zero is returned only in the case of an aborted 'ethCfmLinkTrace'
test.ro Gauge32 UNITS "hops" .1.3.6.1.4.1.6527.3.1.2.11.2.4.1.2 |
tmnxOamTrResultsCurProbeCountReflects the current probe count (1..10) for an Alcatel-Lucent
SROS OAM Trace Route operation. The maximum probe count is
determined by tmnxOamTrCtlProbesPerHop.ro Gauge32 UNITS "probes" .1.3.6.1.4.1.6527.3.1.2.11.2.4.1.3 |
tmnxOamTrResultsIpTgtAddrThis objects reports the IP address associated
with a tmnxOamTrCtlTargetIpAddress value when the
destination address is specified as a DNS name.
The value of this object should be a zero length
octet string when a DNS name is not specified or
when a specified DNS name fails to resolve.
This object was obsoleted in release 4.0 and replaced with
InetAddress objects tmnxOamTrResultsTgtAddrType and
tmnxOamTrResultsTgtAddress.roobsolete IpAddress .1.3.6.1.4.1.6527.3.1.2.11.2.4.1.4 |
tmnxOamTrResultsTestAttemptsThe current number of attempts to determine a path
to a target. The value of this object MUST be started
at 0.
This object was made obsolete in the 3.0 release. Originally
this table was used to report a summary of the results of all
traceroute test for the configured test. An additional index,
tmnxOamTrResultsTestRunIndex, has been added to this table and
a row in this table now represents the results of a single
traceroute test run. The new object tmnxOamTrCtlRuns in the
tmnxOamTrCtlTable indicates the number of times this traceroute
test has been run.roobsolete Unsigned32 UNITS "tests" .1.3.6.1.4.1.6527.3.1.2.11.2.4.1.5 |
tmnxOamTrResultsTestSuccessesThe current number of attempts to determine a path
to a target that have succeeded. The value of this
object MUST be reported as 0 when no attempts have
succeeded.
This object was made obsolete in the 3.0 release. Originally
this table was used to report a summary of the results of all
traceroute test for the configured test. An additional index,
tmnxOamTrResultsTestRunIndex, has been added to this table and
a row in this table now represents the results of a single
traceroute test run. The new object tmnxOamTrCtlFailures in the
tmnxOamTrCtlTable indicates the number of times an attempt to run
this traceroute test has failed. The number of successful runs
can be calclated as (tmnxOamTrCtlRuns - tmnxOamTrCtlFailures).roobsolete Unsigned32 UNITS "tests" .1.3.6.1.4.1.6527.3.1.2.11.2.4.1.6 |
tmnxOamTrResultsLastGoodPathThe date and time when the last complete path
was determined.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.2.4.1.7 |
tmnxOamTrResultsTestRunIndexThe value of tmnxOamTrResultsTestRunIndex identifies the
row entry that reports results for a single OAM trace
route test run.
The agent starts assigning tmnxOamTrResultsTestRunIndex values
at 1 and wraps after exceeding the maximum possible value as
defined by the limit of this object. Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.4.1.8 |
tmnxOamTrResultsTgtAddrTypeThe value of tmnxOamTrResultsTgtAddrType indicates the Internet
address type stored in tmnxOamTrResultsTgtAddress.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.4.1.9 |
tmnxOamTrResultsTgtAddressThe value of tmnxOamTrResultsTgtAddress indicates the Internet
address associated with a tmnxOamTrCtlTgtAddress value when the
destination address is specified as a DNS name. The value of this
object should be a zero length octet string when a DNS name is not
specified or when a specified DNS name fails to resolve.ro InetAddress .1.3.6.1.4.1.6527.3.1.2.11.2.4.1.10 |
tmnxOamTrResultsTestRunResultThe object contains the overall state of the trace test.ro TmnxOamTestResult .1.3.6.1.4.1.6527.3.1.2.11.2.4.1.11 |
tmnxOamTrProbeHistoryTabletmnxOamTrProbeHistoryTable contains per-probe results for trace route
tests.
The number of rows in this table for a test is limited to the results
of 3 runs.
This table is not used for tests which have tmnxOamTrCtlTestMode set to
'ldpTreeTrace'. SEQUENCE OF TmnxOamTrProbeHistoryEntry .1.3.6.1.4.1.6527.3.1.2.11.2.5 |
tmnxOamTrProbeHistoryEntryA tmnxOamTrProbeHistoryEntry is created by the system when the result
of a trace route probe launch is determined.
A tmnxOamTrProbeHistoryEntry is destroyed when the corresponding
tmnxOamTrCtlEntry is destroyed.
The first two indices identify the parent tmnxOamTrCtlEntry. The third
index identifies a trace route test run. Each subsequent index is
described in its DESCRIPTION clause, below. TmnxOamTrProbeHistoryEntry .1.3.6.1.4.1.6527.3.1.2.11.2.5.1 |
tmnxOamTrProbeHistoryIndexThe value of tmnxOamTrProbeHistoryIndex specifies the entries belonging
to a single OAM Trace Route test instance.
The tmnxOamTrProbeHistoryIndex values are assigned starting at 1
and wrap on exceeding the upper bound. Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.5.1.1 |
tmnxOamTrProbeHistoryHopIndexIndicates which hop in an Alcatel-Lucent SROS OAM Trace Route path that
the probe's results are for. The value of this object is initially
determined by the value of tmnxOamTrCtlInitialTtl. Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.5.1.2 |
tmnxOamTrProbeHistoryProbeIndexIndicates the index of a probe for a particular hop in an Alcatel-Lucent
SROS OAM Trace Route path. The number of probes per hop is
determined by the value of the corresponding tmnxOamTrCtlProbesPerHop
object. Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.5.1.3 |
tmnxOamTrProbeHistoryIpAddrThe IP address of a hop in an Alcatel-Lucent SROS OAM Trace Route path.
The value of tmnxOamTrProbeHistoryIpAddr specifies the Ipv4
address of the remote node that generated this reply to a OAM
Trace Route probe.
This object was obsoleted in release 4.0 and replaced with
InetAddress objects tmnxOamTrProbeHistoryAddrType and
tmnxOamTrProbeHistoryAddress.roobsolete IpAddress .1.3.6.1.4.1.6527.3.1.2.11.2.5.1.4 |
tmnxOamTrProbeHistoryResponseThe amount of time measured in microseconds from when
a probe was sent to when its response was received, two-way
time, or when it timed out.
The value of this object is reported as 0 when it is not
possible to transmit a probe.ro Unsigned32 UNITS "microseconds" .1.3.6.1.4.1.6527.3.1.2.11.2.5.1.5 |
tmnxOamTrProbeHistoryOneWayTimeThe amount of time measured in microseconds from when
a OAM probe was sent to when it was received by the replier,
out-bound one-way time.
The value of this object is reported as 0 when it is not possible
to transmit an OAM probe or the information is not available.ro Integer32 UNITS "microseconds" .1.3.6.1.4.1.6527.3.1.2.11.2.5.1.6 |
tmnxOamTrProbeHistoryStatusThe result of an Alcatel-Lucent SROS OAM Trace Route operation made
by a remote node to a particular probe.ro TmnxOamResponseStatus .1.3.6.1.4.1.6527.3.1.2.11.2.5.1.7 |
tmnxOamTrProbeHistoryLastRCThe last implementation method specific reply code received.
The Alcatel-Lucent SROS OAM Trace Route is usually implemented by
transmitting a series of probe packets with increasing time-to-live
values. A probe packet is a UDP datagram encapsulated into an
IP packet. Each hop in a path to the target (destination) host
rejects the probe packets (probe's TTL too small, ICMP reply) until
either the maximum TTL is exceeded or the target host is
received. For icmpTraceRoute, both icmp packet type and code
are included.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.11.2.5.1.8 |
tmnxOamTrProbeHistoryTimeTimestamp for when this probe results were determined.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.2.5.1.9 |
tmnxOamTrProbeHistoryResponsePlaneThe value of tmnxOamTrProbeHistoryResponsePlane indicates the
type of response plane this trace route response was received on.ro TmnxOamTestResponsePlane .1.3.6.1.4.1.6527.3.1.2.11.2.5.1.10 |
tmnxOamTrProbeHistoryAddressTypeThe value of tmnxOamTrProbeHistoryAddressType indicates the type of
binding address information returned in response to a test.
When the test has the tmnxOamTrCtlTestMode value 'ethCfmLinkTrace',
'unknown' is returned.
For 'macTraceRoute', three types of address are applicable - 'sapId',
'localCpu', and 'sdpId'. Address type of 'sdpId' is a special case
used specifically to indicate that the probe was traversing a b-vpls
node in a PBB network (but where destination MAC is not necessarily
known to the b-vpls node).ro TmnxOamAddressType .1.3.6.1.4.1.6527.3.1.2.11.2.5.1.11 |
tmnxOamTrProbeHistorySapIdThe value of tmnxOamTrProbeHistorySapId is the name of the access
port of the SAP supporting the requested IP address returned in
response to a 'vprnTraceRoute' probe.
If the value of tmnxOamTrProbeHistoryAddressType is not 'sapId',
this object is not relevant and MUST have a null string ''.ro TmnxStrSapId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.5.1.12 |
tmnxOamTrProbeHistoryVersionThe value of tmnxOamTrProbeHistoryVersion indicates the protocol
version for this OAM ping reply.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.5.1.14 |
tmnxOamTrProbeHistoryRouterIDThe value tmnxOamTrProbeHistoryRouterID indicates the downstream
router ID of the node that provided this ping reply. This object
is valid only when tmnxOamTrCtlTestMode has a value of
'lspTraceRoute'.ro RouterID (OSPF-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.5.1.15 |
tmnxOamTrProbeHistoryIfIndexThe value of tmnxOamTrProbeHistoryIfIndex indicates for a
'lspTraceRoute' or 'vccvTraceRoute' probe the ifIndex value of the
interface that this probe was transmitted from.
For other types of probes, this value is not significant and zero is
returned.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.5.1.16 |
tmnxOamTrProbeHistoryDataLenThe value of tmnxOamTrProbeHistoryDataLen indicates the UDP data length
of the echo reply.
A valid value is returned when the test has a tmnxOamTrCtlTestMode
value of 'icmpTraceRoute', 'lspTraceRoute', 'p2mpLspTrace', or
'vccvTraceRoute'. Otherwise, this value is not significant and zero is
returned.ro Unsigned32 UNITS "octets" .1.3.6.1.4.1.6527.3.1.2.11.2.5.1.17 |
tmnxOamTrProbeHistorySizeThe value of tmnxOamTrProbeHistorySize indicates the size in octets
of the user payload in the probe request packet. It does not
include the service encapsulation.ro Unsigned32 UNITS "octets" .1.3.6.1.4.1.6527.3.1.2.11.2.5.1.18 |
tmnxOamTrProbeHistoryInOneWayTimeThe amount of time measured in microseconds from when
a OAM probe reply was sent to when it was received,
in-bound one-way time.
The value of this object is reported as 0 when the information
is not available.ro Integer32 UNITS "microseconds" .1.3.6.1.4.1.6527.3.1.2.11.2.5.1.19 |
tmnxOamTrProbeHistoryAddrTypeThe value of tmnxOamTrProbeHistoryAddrType indicates the Internet
address type stored in tmnxOamTrProbeHistoryAddress.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.5.1.20 |
tmnxOamTrProbeHistoryAddressThe value of tmnxOamTrProbeHistoryAddress indicates the Internet
address of a hop in an Alcatel-Lucent SROS OAM Trace Route path.ro InetAddress .1.3.6.1.4.1.6527.3.1.2.11.2.5.1.21 |
tmnxOamTrProbeHistorySrcGlobalIdThe value of tmnxOamTrProbeHistorySrcGlobalId indicates the source
MPLS-TP global identifier of the replying node. The value is copied
from the reply's RFC 6426 Source Identifier TLV. If the TLV is absent,
zero is returned.
This value is relevant when tmnxOamTrCtlTestMode is 'lspTraceRoute' or
'vccvTraceRoute'. Otherwise, zero is returned.ro TmnxMplsTpGlobalID .1.3.6.1.4.1.6527.3.1.2.11.2.5.1.22 |
tmnxOamTrProbeHistorySrcNodeIdThe value of tmnxOamTrProbeHistorySrcNodeId indicates the source
MPLS-TP node identifier of the replying node. The value is copied from
the reply's RFC 6426 Source Identifier TLV. If the TLV is absent, zero
is returned.
This value is relevant when tmnxOamTrCtlTestMode is 'lspTraceRoute' or
'vccvTraceRoute'. Otherwise, zero is returned.ro TmnxMplsTpNodeID .1.3.6.1.4.1.6527.3.1.2.11.2.5.1.23 |
tmnxOamTrHopsTableDefines the Alcatel-Lucent SROS OAM Trace Route Hop Table for keeping
track of the results of an Alcatel-Lucent SROS OAM Trace Route test
on a per hop basis. SEQUENCE OF TmnxOamTrHopsEntry .1.3.6.1.4.1.6527.3.1.2.11.2.6 |
tmnxOamTrHopsEntryDefines an entry in the tmnxOamTrHopsTable.
The first two index elements identify the tmnxOamTrCtlEntry
that a tmnxOamTrHopsEntry belongs to. The third index element
identifies a OAM trace route test run. The fourth index element,
tmnxOamTrHopsHopIndex, selects a hop in an Alcatel-Lucent SROS OAM
Trace Route path. TmnxOamTrHopsEntry .1.3.6.1.4.1.6527.3.1.2.11.2.6.1 |
tmnxOamTrHopsHopIndexSpecifies the hop index for an Alcatel-Lucent SROS OAM Trace Route
hop. Values for this object with respect to the same
tmnxOamTrCtlOwnerIndex and tmnxOamTrCtlTestIndex MUST start at 1
and increase monotonically.
The tmnxOamTrHopsTable keeps the current Alcatel-Lucent SROS OAM Trace
Route path per tmnxOamTrCtlEntry.
All hops (tmnxOamTrHopsTable entries) in an Alcatel-Lucent SROS OAM
Trace Route path MUST be updated at the same time when an
Alcatel-Lucent SROS OAM Trace Route operation completes. Care needs
to be applied when either a path changes or can't be determined.
The initial portion of the path, up to the first hop change, MUST
retain the same tmnxOamTrHopsHopIndex values. The remaining portion
of the path SHOULD be assigned new tmnxOamTrHopsHopIndex values. Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.6.1.1 |
tmnxOamTrHopsIpTgtAddressThis object reports the IP address associated with
the hop. A value for this object should be reported
as a numeric IP address and not as a DNS name.
This value of this object is not significant when
tmnxOamTrCtlTestMode has a value of 'macTraceRoute'.
This object was obsoleted in release 4.0 and replaced with
InetAddress objects tmnxOamTrHopsTgtAddrType and
tmnxOamTrHopsTgtAddrType.roobsolete IpAddress .1.3.6.1.4.1.6527.3.1.2.11.2.6.1.2 |
tmnxOamTrHopsMinRttThe minimum Alcatel-Lucent SROS OAM Trace Route round-trip-time (RTT)
received for this hop. A value of 0 for this object implies that no
RTT has been received.ro Unsigned32 UNITS "microseconds" .1.3.6.1.4.1.6527.3.1.2.11.2.6.1.3 |
tmnxOamTrHopsMaxRttThe maximum Alcatel-Lucent SROS OAM Trace Route round-trip-time (RTT)
received for this hop. A value of 0 for this object implies that no
RTT has been received.ro Unsigned32 UNITS "microseconds" .1.3.6.1.4.1.6527.3.1.2.11.2.6.1.4 |
tmnxOamTrHopsAverageRttThe current average Alcatel-Lucent SROS OAM Trace Route round-trip-time
(RTT) for this hop.ro Unsigned32 UNITS "microseconds" .1.3.6.1.4.1.6527.3.1.2.11.2.6.1.5 |
tmnxOamTrHopsRttSumOfSquaresThe value of tmnxOamTrHopsRttSumOfSquares indicates the least
significant 32 bits of tmnxOamTrHopsRttHCSumSquares.ro Unsigned32 UNITS "microseconds squared" .1.3.6.1.4.1.6527.3.1.2.11.2.6.1.6 |
tmnxOamTrHopsMinTtThe minimum Alcatel-Lucent SROS OAM Trace Route outbound one-way trip
time received for this hop. A value of 0 for this object implies
that no one-way trip time has been received.ro Integer32 UNITS "microseconds" .1.3.6.1.4.1.6527.3.1.2.11.2.6.1.7 |
tmnxOamTrHopsMaxTtThe maximum Alcatel-Lucent SROS OAM Trace Route outbound one-way trip
time received for this hop. A value of 0 for this object implies
that no one-way trip time has been received.ro Integer32 UNITS "microseconds" .1.3.6.1.4.1.6527.3.1.2.11.2.6.1.8 |
tmnxOamTrHopsAverageTtThe current average Alcatel-Lucent SROS OAM Trace Route outbound
one-way trip time for this hop.ro Integer32 UNITS "microseconds" .1.3.6.1.4.1.6527.3.1.2.11.2.6.1.9 |
tmnxOamTrHopsTtSumOfSquaresThe value of tmnxOamTrHopsTtSumOfSquares indicates the least
significant 32 bits of tmnxOamTrHopsTtHCSumSquares.ro Unsigned32 UNITS "microseconds squared" .1.3.6.1.4.1.6527.3.1.2.11.2.6.1.10 |
tmnxOamTrHopsSentProbesThe value of this object reflects the number of probes sent
for this hop during this Alcatel-Lucent SROS OAM Trace Route test.
The value of this object should start at 0.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.6.1.11 |
tmnxOamTrHopsProbeResponsesNumber of responses received for this hop during this Alcatel-Lucent
SROS OAM Trace Route test. This value of this object should
start at 0.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.6.1.12 |
tmnxOamTrHopsLastGoodProbeDate and time when the last response was received for a probe
for this hop during this Alcatel-Lucent SROS OAM Trace Route test.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.2.6.1.13 |
tmnxOamTrHopsMinInTtThe minimum OAM trace route inbound one-way trip time received.
A value of 0 for this object implies that no one-way trip time
measurement is available.ro Integer32 UNITS "microseconds" .1.3.6.1.4.1.6527.3.1.2.11.2.6.1.18 |
tmnxOamTrHopsMaxInTtThe maximum OAM trace route inbound one-way trip time received.
A value of 0 for this object implies that no one-way trip time
measurement is available.ro Integer32 UNITS "microseconds" .1.3.6.1.4.1.6527.3.1.2.11.2.6.1.19 |
tmnxOamTrHopsAverageInTtThe current average OAM inbound inbound one-way trip time.
A value of 0 for this object implies that no one-way trip time
measurement is available.ro Integer32 UNITS "microseconds" .1.3.6.1.4.1.6527.3.1.2.11.2.6.1.20 |
tmnxOamTrHopsInTtSumOfSqrsThe value of tmnxOamTrHopsInTtSumOfSqrs indicates the least
significant 32 bits of tmnxOamTrHopsInTtHCSumSqrs.ro Unsigned32 UNITS "microseconds squared" .1.3.6.1.4.1.6527.3.1.2.11.2.6.1.21 |
tmnxOamTrHopsOutJitterThe value of tmnxOamTrHopsOutJitter indicates the
amount of outbound one-way trip jitter, expressed in microseconds,
for a trace route probe request packet sent for this OAM test.
A value of 0 for this object implies that no one-way trip jitter
measurement is available.ro Integer32 UNITS "microseconds" .1.3.6.1.4.1.6527.3.1.2.11.2.6.1.22 |
tmnxOamTrHopsInJitterThe value of tmnxOamTrHopsInJitter indicates the
amount of inbound one-way trip jitter, expressed in microseconds,
for a trace route probe response packet received for this OAM test.
A value of 0 for this object implies that no one-way trip jitter
measurement is available.ro Integer32 UNITS "microseconds" .1.3.6.1.4.1.6527.3.1.2.11.2.6.1.23 |
tmnxOamTrHopsRtJitterThe value of tmnxOamTrHopsRtJitter indicates the
amount of two-way trip jitter, expressed in microseconds, for a
trace route probe sent for this OAM test.
A value of 0 for this object implies that no two-way-trip jitter
measurement is available.ro Integer32 UNITS "microseconds" .1.3.6.1.4.1.6527.3.1.2.11.2.6.1.24 |
tmnxOamTrHopsProbeTimeoutsThe value of tmnxOamTrHopsProbeTimeouts indicates the number
of probes that timed out without receiving a response.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.6.1.25 |
tmnxOamTrHopsProbeFailuresThe value of tmnxOamTrHopsProbeFailures indicates the total
number of probes that failed to be transmitted plus the number of
probes that timed out without receiving a response.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.6.1.26 |
tmnxOamTrHopsTgtAddrTypeThe value of tmnxOamTrHopsTgtAddrType indicates the Internet
address type stored in tmnxOamTrHopsTgtAddress.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.6.1.27 |
tmnxOamTrHopsTgtAddressThe value of tmnxOamTrHopsTgtAddress indicates the Internet
address associated with the hop. A value for this object should
be reported as a numeric IP address and not as a DNS name.
This value of this object is not significant when
tmnxOamTrCtlTestMode has a value of 'macTraceRoute' or
'ethCfmLinkTrace'.ro InetAddress .1.3.6.1.4.1.6527.3.1.2.11.2.6.1.28 |
tmnxOamTrHopsRttOFSumSquaresThe value of tmnxOamTrHopsRttOFSumSquares indicates the number of times
tmnxOamTrHopsRttSumOfSquares overflowed.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.11.2.6.1.29 |
tmnxOamTrHopsRttHCSumSquaresThe value of tmnxOamTrHopsRttHCSumSquares indicates the sum of squares
of the round trip times of the trace route test for this hop. Its
purpose is to enable the standard deviation calculation.
The value of this object will be reported as 0 when one or more of the
following conditions apply:
1. No round trip time measurement is available.
2. The test stopped before completion.
3. The test type (i.e. tmnxOamTrCtlTestMode) is one of the following:
'ldpTreeTrace',
'mcastTraceRoute',
'p2mpLspTrace'.ro Counter64 UNITS "microseconds squared" .1.3.6.1.4.1.6527.3.1.2.11.2.6.1.30 |
tmnxOamTrHopsTtOFSumSquaresThe value of tmnxOamTrHopsTtOFSumSquares indicates the number of times
tmnxOamTrHopsTtSumOfSquares overflowed.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.11.2.6.1.31 |
tmnxOamTrHopsTtHCSumSquaresThe value of tmnxOamTrHopsTtHCSumSquares indicates the sum of squares
of the outbound one-way trip times of the trace route test for this
hop. Its purpose is to enable the standard deviation calculation.
The value of this object will be reported as 0 when one or more of the
following conditions apply:
1. No outbound one-way trip time measurement is available.
2. The test stopped before completion.
3. The test type (i.e. tmnxOamTrCtlTestMode) is one of the following:
'ldpTreeTrace',
'mcastTraceRoute',
'p2mpLspTrace'.ro Counter64 UNITS "microseconds squared" .1.3.6.1.4.1.6527.3.1.2.11.2.6.1.32 |
tmnxOamTrHopsInTtOFSumSqrsThe value of tmnxOamTrHopsInTtOFSumSqrs indicates the number of times
tmnxOamTrHopsInTtSumOfSqrs overflowed.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.11.2.6.1.33 |
tmnxOamTrHopsInTtHCSumSqrsThe value of tmnxOamTrHopsInTtHCSumSqrs indicates the sum of squares of
the inbound one-way trip times of the trace route test for this hop.
Its purpose is to enable the standard deviation calculation.
The value of this object will be reported as 0 when one or more of the
following conditions apply:
1. No inbound one-way trip time measurement is available.
2. The test stopped before completion.
3. The test type (i.e. tmnxOamTrCtlTestMode) is one of the following:
'ldpTreeTrace',
'mcastTraceRoute',
'p2mpLspTrace'.ro Counter64 UNITS "microseconds squared" .1.3.6.1.4.1.6527.3.1.2.11.2.6.1.34 |
tmnxOamMacTrCtlTableDefines the Alcatel-Lucent SROS OAM MAC Trace Route Control Table for
providing, via SNMP, the capability of performing Alcatel-Lucent SROS
OAM 'macTraceRoute' test operations. The results of these tests
are stored in the tmnxOamTrResultsTable, tmnxOamTrProbeHistoryTable
and the tmnxOamMacTrL2MapTable. SEQUENCE OF TmnxOamMacTrCtlEntry .1.3.6.1.4.1.6527.3.1.2.11.2.7 |
tmnxOamMacTrCtlEntryDefines an entry in the tmnxOamMacTrCtlTable. The first index
element, tmnxOamTrCtlOwnerIndex, is of type SnmpAdminString,
a textual convention that allows for use of the SNMPv3
View-Based Access Control Model (RFC 2575 [11], VACM)
and allows a management application to identify its entries.
The second index, tmnxOamTrCtlTestIndex, enables the same
management application to have multiple outstanding requests. TmnxOamMacTrCtlEntry .1.3.6.1.4.1.6527.3.1.2.11.2.7.1 |
tmnxOamMacTrCtlTargetMacAddrThe value of tmnxOamMacTrCtlTargetMacAddr is a 6-octet value
that specifies the target MAC address to be used in the query
request for performing an OAM Mac Trace Route operation when
tmnxOamTrCtlTestMode has a value of 'macTraceRoute'.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.2.7.1.1 |
tmnxOamMacTrCtlSourceMacAddrThe value of tmnxOamMacTrCtlSourceMacAddr is a 6-octet value
that specifies the MAC address to be used as the source in the
query request for performing an OAM MAC Trace Route operation when
tmnxOamTrCtlTestMode has a value of 'macTraceRoute'.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.2.7.1.2 |
tmnxOamMacTrCtlSendControlWhen the value of tmnxOamMacTrCtlSendControl is 'true', the OAM
MAC Trace Route packet is sent directly to the destination IP address
via the control plane. If its value is 'false', the packet is sent
via the data plane.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.2.7.1.3 |
tmnxOamMacTrCtlReplyControlWhen the value of tmnxOamMacTrCtlReplyControl is 'true', the
OAM Mac Trace Route response is returned using the control plane.
If its value is 'false', the packet is sent via the data plane.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.2.7.1.4 |
tmnxOamMacTrL2MapTableDefines a table for storing the results of an OAM 'macTraceRoute'
probe operation when a L2 Mapping TLV was returned. Each row
represents a single L2FEC TLV within the L2 Mapping TLV. A single
L2 mapping entry is returned if the 'macTraceRoute' replier knows
the requested VPN ID and has a binding for the requested MAC
address. Multiple downstream L2 mappings that specify
the replier's flooding domain may be returned if the replier has
no bindings for the MAC address.
An entry in this table is created when the result of an OAM
'macTraceRoute' probe is determined. An entry is removed from
this table when its corresponding tmnxOamTrCtlEntry is deleted. SEQUENCE OF TmnxOamMacTrL2MapEntry .1.3.6.1.4.1.6527.3.1.2.11.2.8 |
tmnxOamMacTrL2MapEntryDefines an entry in the tmnxOamMacTrL2MapTable. The first two
index elements identify the tmnxOamTrCtlEntry that a
tmnxOamMacTrL2MapEntry belongs to. The third index element
identifies a particular OAM trace route test run. The fourth
index element selects the group of responses associated with a
specific probe attempt. The fifth and sixth indexes select the
hop and the probe at that hop for a particular Alcatel-Lucent SROS
OAM Trace Route operation. Note that in the case of a successful
'macTraceRoute' reply there will be only one row entry created.
However there may also be one or more error replies. The seventh
index selects a single L2 mapping entry within a specific
probe reply. TmnxOamMacTrL2MapEntry .1.3.6.1.4.1.6527.3.1.2.11.2.8.1 |
tmnxOamMacTrL2MapIndexThe tmnxOamMacTrL2MapIndex selects a single L2 mapping entry
within a specific 'macTraceRoute' probe reply.
The agent starts assigning tmnxOamMacTrL2MapIndex values at 1. Unsigned32 (1..'ffffffff'h) SYNTAX Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.8.1.1 |
tmnxOamMacTrL2MapRouterIDThe value of tmnxOamMacTrL2MapRouterID is the router ID for this
L2 mapping entry.ro IpAddress .1.3.6.1.4.1.6527.3.1.2.11.2.8.1.2 |
tmnxOamMacTrL2MapLabelThe value of tmnxOamMacTrL2MapLabel is the label used by the
router for the L2FEC or VC ID specified by this L2 mapping entry.ro MplsLabel (MPLS-LDP-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.8.1.3 |
tmnxOamMacTrL2MapProtocolThe value of tmnxOamMacTrL2MapProtocol is the signaling protocol
used by the router for the L2FEC or VC ID specified by this L2
mapping entry.ro TmnxOamSignalProtocol .1.3.6.1.4.1.6527.3.1.2.11.2.8.1.4 |
tmnxOamMacTrL2MapVCTypeThe value of tmnxOamMacTrL2MapVCType specifies the class of
VC ID given in tmnxOamMacTrL2MapVCID.ro TmnxOamVcType .1.3.6.1.4.1.6527.3.1.2.11.2.8.1.5 |
tmnxOamMacTrL2MapVCIDThe value of tmnxOamMacTrL2MapVCID is the VC ID associated with
the label used by the L2FEC specified by this L2 mapping entry.ro TmnxVcId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.8.1.6 |
tmnxOamMacTrL2MapDirectionThe value of tmnxOamMacTrL2MapDirection specifies the direction
that this L2 mapping entry is in relation to the node that returned
the 'macTraceRoute' reply.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.11.2.8.1.7 |
tmnxOamMacTrL2MapSdpIdThe value of tmnxOamMacTrL2MapSdpId specifies the ID of the SDP
supporting the L2 mapping entry that returned the reply.
If this mapping is not a SDP, this object is not relevant and
MUST return a value of '0'.ro SdpId (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.8.1.8 |
tmnxOamMacTrL2MapSapNameThe value of tmnxOamMacTrL2MapSapName specifies the SAP name
when the downstream of the responder is a SAP.
If the downstream responder is not a SAP, this object is not
relevant and MUST return a zero length empty string.ro TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.8.1.9 |
tmnxOamLspTrCtlTableDefines the Alcatel-Lucent SROS OAM LSP Trace Route Control Table
for providing, via SNMP, the capability of performing Alcatel-Lucent
SROS OAM 'lspTraceRoute' test operations. The results of
these tests are stored in the tmnxOamTrResultsTable and the
tmnxOamTrProbeHistoryTable. SEQUENCE OF TmnxOamLspTrCtlEntry .1.3.6.1.4.1.6527.3.1.2.11.2.9 |
tmnxOamLspTrCtlEntryDefines an entry in the tmnxOamLspTrCtlTable. The first index
element, tmnxOamTrCtlOwnerIndex, is of type SnmpAdminString,
a textual convention that allows for use of the SNMPv3
View-Based Access Control Model (RFC 2575 [11], VACM)
and allows a management application to identify its entries.
The second index, tmnxOamTrCtlTestIndex, enables the same
management application to have multiple outstanding requests. TmnxOamLspTrCtlEntry .1.3.6.1.4.1.6527.3.1.2.11.2.9.1 |
tmnxOamLspTrCtlVRtrIDThe unique value which identifies this virtual router in the
Alcatel-Lucent SROS system. The vRtrID value for each virtual router
must remain constant at least from one re-initialization of the
system management processor (CPM) to the next. There will always
be at least one router entry defined by the agent with vRtrID=1
which represents the base transport router.
This object was obsoleted in release 6.0R15 and replaced with
tmnxOamTrCtlVRtrID in tmnxOamTrCtlTable.rwobsolete TmnxVRtrID (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.9.1.1 |
tmnxOamLspTrCtlLspNameAdministrative name of the target Labeled Switch Path (LSP) for this
OAM LSP Trace Route test. The LSP name must be unique within the
virtual router instance specified by tmnxOamLspTrCtlVRtrID.
This parameter is mutually exclusive with the IP prefix parameter
associated with an LDP based LSP (tmnxOamLspTrCtlLdpIpPrefix). Either
the LSP name or the LDP IP Prefix must be specified but not both.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.9.1.2 |
tmnxOamLspTrCtlPathNameAdministrative name of the Path (LSP) for this OAM LSP Trace Route
test. The Path name must be unique within the virtual router
instance specified by tmnxOamLspTrCtlVRtrID.
This is an optional parameter which can be specified only if the
LSP Name parameter is specified.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.9.1.3 |
tmnxOamLspTrCtlLdpIpPrefixThe IP prefix for the LDP based LSP for this OAM LSP Trace Route
test.
This parameter is mutually exclusive with the LSP name parameter
(tmnxOamLspTrCtlLspName). Either the LDP IP Prefix or the LSP name
must be specified but not both.
This object was obsoleted in release 4.0 and replaced with
InetAddress objects tmnxOamLspTrCtlLdpPrefixType and
tmnxOamLspTrCtlLdpPrefix.rwobsolete IpAddress .1.3.6.1.4.1.6527.3.1.2.11.2.9.1.4 |
tmnxOamLspTrCtlLdpIpPrefixLenThe IP prefix length for the LDP based LSP for this OAM LSP Trace
Route test.
The value of this parameter is valid only when LDP IP Prefix
has been specified.
This object was obsoleted in release 4.0 and replaced with
InetAddress object tmnxOamLspTrCtlLdpPrefixLen.rwobsolete IpAddressPrefixLength (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.9.1.5 |
tmnxOamLspTrCtlLdpPrefixTypeThe value of tmnxOamLspTrCtlLdpPrefixType specifies the type of
Internet address stored in tmnxOamLspTrCtlLdpPrefix.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.9.1.6 |
tmnxOamLspTrCtlLdpPrefixThe value of tmnxOamLspTrCtlLdpPrefix specifies the Internet address
prefix for the LDP based LSP for this OAM LSP Trace Route
test.
This parameter is mutually exclusive with the LSP name parameter
(tmnxOamLspTrCtlLspName). Either the LDP IP Prefix or the LSP name
must be specified but not both.rw InetAddress .1.3.6.1.4.1.6527.3.1.2.11.2.9.1.7 |
tmnxOamLspTrCtlLdpPrefixLenThe value of tmnxOamLspTrCtlLdpPrefixLen specifies the Internet
address prefix length for the LDP based LSP for this OAM LSP Trace
Route test.
The value of this parameter is valid only when LDP IP Prefix
has been specified.rw InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.9.1.8 |
tmnxOamLspTrCtlPathDestTypeThe value of tmnxOamLspTrCtlPathDestType specifies the type
of Internet address stored in tmnxOamLspTrCtlPathDest.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.9.1.9 |
tmnxOamLspTrCtlPathDestThe value of tmnxOamLspTrCtlPathDest specifies a unique path
in a multipath setup for this OAM LSP Trace Route to traverse.
This address is used as part of a hash key to select the
appropriate ECMP to the destination of an OAM LSP Trace test.
This is an optional parameter.rw InetAddress .1.3.6.1.4.1.6527.3.1.2.11.2.9.1.10 |
tmnxOamLspTrCtlNhIntfNameAdministrative name of the next hop interface for this OAM LSP
Trace Route test to be sent. The interface name must be unique
within the virtual router instance specified by
tmnxOamLspTrCtlVRtrID.
This is an optional parameter which can be specified only if the
tmnxOamLspTrCtlPathDest parameter is specified. This parameter
is mutually exclusive with the tmnxOamLspTrCtlNhAddress
parameter. Either the next-hop interface name or next-hop address
can be specified but not both. An attempt to set this object to a
non-default value when tmnxOamLspTrCtlNhAddress has a
non-default value will result in an 'inconsistentValue' error.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.9.1.11 |
tmnxOamLspTrCtlNhAddressTypeThe value of tmnxOamLspTrCtlNhAddressType specifies the type
of Internet address stored in tmnxOamLspTrCtlNhAddress.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.9.1.12 |
tmnxOamLspTrCtlNhAddressThe value of tmnxOamLspTrCtlNhAddress specifies the Interface
address to the next hop through which this OAM LSP Trace Route
test is to be transmitted.
This is an optional parameter which can be specified only if the
tmnxOamLspTrCtlPathDest parameter is specified. This parameter
is mutually exclusive with tmnxOamLspTrCtlNhIntfName parameter.
Either the next-hop interface name or next-hop address
can be specified but not both. An attempt to set this object to a
non-default value when tmnxOamLspTrCtlNhIntfName has a
non-default value will result in an 'inconsistentValue' error.rw InetAddress .1.3.6.1.4.1.6527.3.1.2.11.2.9.1.13 |
tmnxOamLspTrCtlDownstreamMapTlvThe value of tmnxOamLspTrCtlDownstreamMapTlv specifies the type of
downstream mapping TLV to insert in the MPLS echo request PDU when
launching the test.
When an LSP trace route test is created, the value of this object
defaults to the value of the global configuration object
tmnxOamMplsEchoDownstreamMapTlv.
The supported object combinations for LSP trace route tests are listed
in the tmnxOamLspTrCtlTable DESCRIPTION clause.rw TmnxOamMplsEchoDownMapTlvOrNone .1.3.6.1.4.1.6527.3.1.2.11.2.9.1.14 |
tmnxOamLspTrCtlTestSubModeThe value of tmnxOamLspTrCtlTestSubMode specifies the type of LSP
trace route test to perform.
When this object is 'unspecified(1)', the type of LSP trace route test
to be performed is determined when the test is started, from the set of
tmnxOamLspTrCtlTable objects configured with non-default values.
If there is a mismatch between tmnxOamLspTrCtlTestSubMode and the
type of the LSP to be tested, the test will fail. For example, if
tmnxOamLspTrCtlTestSubMode is 'static(2)', and
tmnxOamLspTrCtlLspName refers to an LSP with
TIMETRA-MPLS-MIB::vRtrMplsLspType not equal to 'mplsTp(7)', the test
will fail.
The supported object combinations for LSP trace route tests are listed
in the tmnxOamLspTrCtlTable DESCRIPTION clause.rw TmnxOamLspTestSubMode .1.3.6.1.4.1.6527.3.1.2.11.2.9.1.15 |
tmnxOamLspTrCtlMplsTpPathTypeThe value of tmnxOamLspTrCtlMplsTpPathType specifies the type of the
MPLS-TP path to be tested.
The supported object combinations for LSP trace route tests are listed
in the tmnxOamLspTrCtlTable DESCRIPTION clause.rw TmnxOamMplsTpPathType .1.3.6.1.4.1.6527.3.1.2.11.2.9.1.16 |
tmnxOamLspTrCtlAssocChannelThe value of tmnxOamLspTrCtlAssocChannel specifies the launched echo
request's usage of the Associated Channel (ACH) mechanism, when testing
an MPLS-TP LSP.
When tmnxOamLspTrCtlTestSubMode is 'static(2)', the default value for
tmnxOamLspTrCtlAssocChannel is 'nonIp(2)'.
The supported object combinations for LSP trace route tests are listed
in the tmnxOamLspTrCtlTable DESCRIPTION clause.rw TmnxOamLspAssocChannel .1.3.6.1.4.1.6527.3.1.2.11.2.9.1.17 |
tmnxOamLspTrCtlForceThe value of tmnxOamLspTrCtlForce specifies whether or not to force
the transmission of the 'lspTraceRoute' request PDU(s).
If tmnxOamLspTrCtlForce is 'true(1)', the test will proceed and request
PDU(s) will be sent regardless of the local operational status of the
tested LSP path.
If tmnxOamLspTrCtlForce is 'false(2)', the test will fail
immediately when the local operational status of the tested LSP path is
down.
The supported object combinations for LSP trace route tests are listed
in the tmnxOamLspTrCtlTable DESCRIPTION clause.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.2.9.1.18 |
tmnxOamLspTrMapTableDefines a table for storing the results of an OAM 'lspTraceRoute'
probe operation when a Downstream Mapping TLV was returned. Each row
represents a single label map within the returned downstream mapping
TLV.
An entry in this table is created when the result of an OAM
'lspTraceRoute' or 'p2mpLspTrace' probe is determined.
An entry is removed from this table when its corresponding
tmnxOamTrCtlEntry is deleted. SEQUENCE OF TmnxOamLspTrMapEntry .1.3.6.1.4.1.6527.3.1.2.11.2.10 |
tmnxOamLspTrMapEntryDefines an entry in the tmnxOamLspTrMapTable. The first two
index elements identify the tmnxOamTrCtlEntry that a
tmnxOamLspTrMapEntry belongs to. The third index element
identifies an OAM trace route test run. The fourth index element
selects the group of responses associated with a specific
probe attempt. The fifth and sixth indexes select the hop and
the probe at that hop for a particular Alcatel-Lucent SROS OAM
Trace Route operation. The seventh index selects a single downstream
L2 map entry within the specific probe reply. TmnxOamLspTrMapEntry .1.3.6.1.4.1.6527.3.1.2.11.2.10.1 |
tmnxOamLspTrMapIndexAn entry in this table is created when the result of a OAM
'lspTraceRoute' probe is determined. The initial 2
instance identifier index values identify the tmnxOamTrCtlEntry
that a OAM probe result (tmnxOamTrProbeHistoryEntry) belongs
to. The tmnxOamTrProbeHistoryIndex identifies a group of replies
received in response to a specific probe transmission. The fourth
and fifth indexes select the hop and the probe at that hop for a
particular Alcatel-Lucent SROS OAM Trace Route operation.
The tmnxOamLspTrMapIndex selects a single L2 mapping entry
within a specific 'lspTraceRoute' probe reply.
The agent starts assigning tmnxOamLspTrMapIndex values at 1. Unsigned32 (1..'ffffffff'h) SYNTAX Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.10.1.1 |
tmnxOamLspTrMapDSIPv4AddrThe value of tmnxOamLspTrMapDSIPv4Addr indicates the IPv4 address
of the downstream LSR that this entry in the tmnxOamLspTrMapTable
describes. If the interface to the downstream LSR is numbered,
then the tmnxOamLspTrMapDSIPv4Addr can either be the downstream
LSR's Router ID or the interface address of the downstream LSR.
If the interface to the downstream LSR is unnumbered, the value
of tmnxOamLspTrMapDSIPv4Addr indicates the downstream LSR's Router
ID.ro IpAddress .1.3.6.1.4.1.6527.3.1.2.11.2.10.1.2 |
tmnxOamLspTrMapAddrTypeThe value of tmnxOamLspTrMapAddrType indicates the type of
downstream interface address specified by tmnxOamLspTrMapDSIfAddr.
The only valid values for tmnxOamLspTrMapAddrType are
'ipv4Address', 'ipv4Unnumbered', 'ipv6Address' and 'ipv6Unnumbered'.ro TmnxOamAddressType .1.3.6.1.4.1.6527.3.1.2.11.2.10.1.3 |
tmnxOamLspTrMapDSIfAddrWhen tmnxOamLspTrMapAddrType has a value of 'ipv4Address'
tmnxOamLspTrMapDSIfAddr indicates the downstream LSR's
interface address. When tmnxOamLspTrMapAddrType has a value
of 'unnumbered', tmnxOamLspTrMapDSIfAddr indicates the index
assigned by the upstream LSR to the interface.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.10.1.4 |
tmnxOamLspTrMapMTUThe value of tmnxOamLspTrMapMTU indicates the largest MPLS frame
(including the label stack) that fits on the interface to the
downstream LSR.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.10.1.5 |
tmnxOamLspTrMapDSIndexThe value of tmnxOamLspTrMapDSIndex indicates the unique index
assigned to the pair of downstream router and interface addresses
represented by this row in the tmnxOamLspTrMapTable.
tmnxOamLspTrMapDSIndex object was obsolete in release 5.0roobsolete Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.10.1.6 |
tmnxOamVprnTrCtlTableDefines the Alcatel-Lucent SROS OAM VPRN Trace Route Control Table for
providing, via SNMP, the capability of performing Alcatel-Lucent SROS
OAM 'vprnTraceRoute' test operations. The results of these tests
are stored in the tmnxOamTrResultsTable, the
tmnxOamTrProbeHistoryTable, the tmnxOamVprnTrRTTable and the
tmnxOamVprnTrNextHopTable. SEQUENCE OF TmnxOamVprnTrCtlEntry .1.3.6.1.4.1.6527.3.1.2.11.2.11 |
tmnxOamVprnTrCtlEntryDefines an entry in the tmnxOamVprnTrCtlTable. The first index
element, tmnxOamTrCtlOwnerIndex, is of type SnmpAdminString,
a textual convention that allows for use of the SNMPv3
View-Based Access Control Model (RFC 2575 [11], VACM)
and allows a management application to identify its entries.
The second index, tmnxOamTrCtlTestIndex, enables the same
management application to have multiple outstanding requests. TmnxOamVprnTrCtlEntry .1.3.6.1.4.1.6527.3.1.2.11.2.11.1 |
tmnxOamVprnTrCtlSourceIpAddrSpecifies the Ipv4 address to be used as the source for
performing an OAM 'vprnTraceRoute' operation when tmnxOamTrCtlTestMode
has a value of 'vprnTraceRoute'. This parameter is required.
This object was obsoleted in release 4.0 and replaced with
InetAddress objects tmnxOamVprnTrCtlSrcAddrType and
tmnxOamVprnTrCtlSrcAddress.rwobsolete IpAddress .1.3.6.1.4.1.6527.3.1.2.11.2.11.1.1 |
tmnxOamVprnTrCtlReplyControlWhen the value of tmnxOamVprnTrCtlReplyControl is 'true', the
OAM 'vprnTraceRoute' response is returned using the control plane.
If its value is 'false', the packet is sent via the data plane.
This object is optional and is not relevant when tmnxOamTrCtlTestMode
has a value other than 'vprnTraceRoute'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.2.11.1.2 |
tmnxOamVprnTrCtlSrcAddrTypeThe value of tmnxOamVprnTrCtlSrcAddrType specifies the type of
Internet address stored in tmnxOamVprnTrCtlSrcAddress.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.11.1.3 |
tmnxOamVprnTrCtlSrcAddressThe value of tmnxOamVprnTrCtlSrcAddress specifies the Internet
address to be used as the source for performing an OAM
'vprnTraceRoute' operation when tmnxOamTrCtlTestMode has a value of
'vprnTraceRoute'. This parameter is required.rw InetAddress .1.3.6.1.4.1.6527.3.1.2.11.2.11.1.4 |
tmnxOamVprnTrL3MapTableDefines a table for storing the results of an OAM 'vprnTraceRoute'
probe operation. The number of entries for a test in this table
is limited to the results of 3 runs.
An entry in this table is created when the result of an OAM
'vprnTraceRoute' probe is determined. An entry is removed from
this table when its corresponding tmnxOamTrCtlEntry is deleted. SEQUENCE OF TmnxOamVprnTrL3MapEntry .1.3.6.1.4.1.6527.3.1.2.11.2.12 |
tmnxOamVprnTrL3MapEntryDefines an entry in the tmnxOamVprnTrL3MapTable. The first
two index elements identify the tmnxOamTrCtlEntry that a
tmnxOamVprnTrL3MapEntry belongs to. The third index element
identifies an OAM trace route test run. The fourth index element
selects a single Alcatel-Lucent SROS OAM 'vprnTraceRoute' operation
result. The fifth and sixth indexes select the hop and the
probe at that hop for a particular Alcatel-Lucent SROS OAM
'vprnTraceRoute' operation. The seventh index selects either the
requestor's or responder's L3 route information. TmnxOamVprnTrL3MapEntry .1.3.6.1.4.1.6527.3.1.2.11.2.12.1 |
tmnxOamVprnTrL3MapReporterThe value of tmnxOamVprnTrL3MapReporter specifies who reported
the route information in this row entry. It may have come from
the 'vprnTraceRoute' requestor's local information or it may be
from the remote 'vprnTraceRoute' responder. Enumeration .1.3.6.1.4.1.6527.3.1.2.11.2.12.1.1 |
tmnxOamVprnTrL3MapRouterIDThe value of tmnxOamVprnTrL3MapRouterID indicates the router ID
of the node, requestor or responder, that provided this route
information.ro RouterID (OSPF-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.12.1.2 |
tmnxOamVprnTrL3MapRteDestAddrThe value of tmnxOamVprnTrL3MapRteDestAddr indicates the IP
address to be advertised for the route information returned by
this 'vprnTraceRoute' reply. When used together with the values
in tmnxOamVprnTrL3MapRteDestMask and tmnxOamVprnTrL3MapRteVprnLabel
a customer route can be identified.
This object was obsoleted in release 4.0 and replaced with
InetAddress objects tmnxOamVprnTrL3MapDestAddrType and
tmnxOamVprnTrL3MapDestAddrType.roobsolete IpAddress .1.3.6.1.4.1.6527.3.1.2.11.2.12.1.3 |
tmnxOamVprnTrL3MapRteDestMaskThe value of tmnxOamVprnTrL3MapRteDestMask indicates the number
of prefix bits (prefix width) to be &-ed with IP address in
tmnxOamVprnTrL3MapRteDestAddr.
This object was obsoleted in release 4.0 and replaced with
InetAddress object tmnxOamVprnTrL3MapDestMaskLen.roobsolete Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.12.1.4 |
tmnxOamVprnTrL3MapRteVprnLabelThe value of tmnxOamVprnTrL3MapRteVprnLabel indicates the VPRN
label associated with the route information returned in this
'vprnTraceRoute' reply.ro MplsLabel (MPLS-LDP-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.12.1.5 |
tmnxOamVprnTrL3MapRteMetricsThe value of tmnxOamVprnTrL3MapRteMetrics indicates the metrics
to be used with this vprnTraceRoute route.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.12.1.6 |
tmnxOamVprnTrL3MapRteLastUpThe value of tmnxOamVprnTrL3MapRteLastUp indicates the time
this route was last added or modified by the protocol.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.2.12.1.7 |
tmnxOamVprnTrL3MapRteOwnerThe value of tmnxOamVprnTrL3MapRteOwner indicates the protocol
that owns this route. It may be a local or remote route.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.11.2.12.1.8 |
tmnxOamVprnTrL3MapRtePrefThe value of tmnxOamVprnTrL3MapRtePref indicates the route
preference value for this route.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.12.1.9 |
tmnxOamVprnTrL3MapRteDistThe value of tmnxOamVprnTrL3MapRteDist is the route distinguisher
associated with the route information returned in this 'vprnTraceRoute'
reply.ro TmnxVPNRouteDistinguisher (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.12.1.10 |
tmnxOamVprnTrL3MapNumNextHopsThe value of tmnxOamVprnTrL3MapNumNextHops indicates the number
of entries in the tmnxOamVprnTrNextHopTable for this route.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.12.1.11 |
tmnxOamVprnTrL3MapNumRteTargetsThe value of tmnxOamVprnTrL3MapNumRteTargets indicates the number
of entries in the tmnxOamVprnTrRTTable for this route.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.12.1.12 |
tmnxOamVprnTrL3MapDestAddrTypeThe value of tmnxOamVprnTrL3MapDestAddrType indicates the type
of internet address stored in tmnxOamVprnTrL3MapDestAddress.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.12.1.13 |
tmnxOamVprnTrL3MapDestAddressThe value of tmnxOamVprnTrL3MapDestAddress indicates the Internet
address to be advertised for the route information returned by
this 'vprnTraceRoute' reply. When used together with the values
in tmnxOamVprnTrL3MapRteDestMask and tmnxOamVprnTrL3MapRteVprnLabel
a customer route can be identified.ro InetAddress .1.3.6.1.4.1.6527.3.1.2.11.2.12.1.14 |
tmnxOamVprnTrL3MapDestMaskLenThe value of tmnxOamVprnTrL3MapDestMaskLen indicates the number
of prefix bits (prefix width) to be &-ed with the IP address in
tmnxOamVprnTrL3MapDestAddress.ro InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.12.1.15 |
tmnxOamVprnTrNextHopTableDefines a table for storing the results of an OAM 'vprnTraceRoute'
probe operation where a L3 route next hop list is returned.
An entry in this table is created when the result of an OAM
'vprnTraceRoute' probe is determined.
An entry is removed from this table when its corresponding
tmnxOamTrCtlEntry is deleted. SEQUENCE OF TmnxOamVprnTrNextHopEntry .1.3.6.1.4.1.6527.3.1.2.11.2.13 |
tmnxOamVprnTrNextHopEntryDefines an entry in the tmnxOamVprnTrNextHopTable. The first two
index elements identify the tmnxOamTrCtlEntry that a
tmnxOamVprnTrNextHopEntry belongs to. The third index element
identifies an OAM trace route test run. The fourth, fifth and sixth
index elements select a single OAM 'vprnTraceRoute' reply. The
seventh index selects either the requestor's or responder's route
information. The eighth index selects a single L3 next hop entry
within a specific 'vprnTraceRoute' probe reply route information. TmnxOamVprnTrNextHopEntry .1.3.6.1.4.1.6527.3.1.2.11.2.13.1 |
tmnxOamVprnTrNextHopIndexThe tmnxOamVprnTrNextHopIndex selects a single L3 next hop entry
associated with the router information returned within a specific
'vprnTraceRoute' probe reply.
The agent starts assigning tmnxOamVprnTrNextHopIndex values at 1. Unsigned32 (1..'ffffffff'h) SYNTAX Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.13.1.1 |
tmnxOamVprnTrNextHopRtrIDThe value of tmnxOamVprnTrNextHopRtrID is the router ID for this
L3 next hop entry.
This object was obsoleted in release 6.0 and replaced with
InetAddress objects tmnxOamVprnTrNextHopAddrType and
tmnxOamVprnTrNextHopAddress.roobsolete RouterID (OSPF-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.13.1.2 |
tmnxOamVprnTrNextHopTypeThe value of tmnxOamVprnTrNextHopType indicates whether the
route owner is a local route or a remote, BGP-VPRN, route.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.11.2.13.1.3 |
tmnxOamVprnTrNextHopTunnelIDWhen the value of tmnxOamVprnTrNextHopType is 'remote' the
value of tmnxOamVprnTrNextHopTunnelID indicates the tunnel ID
used to reach this BGP next hop.ro TmnxTunnelID (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.13.1.4 |
tmnxOamVprnTrNextHopTunnelTypeWhen the value of tmnxOamVprnTrNextHopType is 'remote' the
value of tmnxOamVprnTrNextHopTunnelType indicates the type of
tunnel used to reach this BGP next hop.ro TmnxTunnelType (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.13.1.5 |
tmnxOamVprnTrNextHopIfIndexWhen the value of tmnxOamVprnTrNextHopType is 'local' the
value of tmnxOamVprnTrNextHopIfIndex indicates the interface
used to reach this ECMP next hop.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.13.1.6 |
tmnxOamVprnTrNextHopAddrTypetmnxOamVprnTrNextHopAddrType indicates the type of Internet address
stored in tmnxOamVprnTrNextHopAddress. Address types 'unknown(0)',
'ipv4(1)', 'ipv6(2)', and 'ipv6z(4)' are supported.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.13.1.7 |
tmnxOamVprnTrNextHopAddressThe value of tmnxOamVprnTrNextHopAddress is the Internet address
for this L3 next hop entry.ro InetAddress .1.3.6.1.4.1.6527.3.1.2.11.2.13.1.8 |
tmnxOamVprnTrRTTableDefines a table for storing the results of an OAM 'vprnTraceRoute'
probe operation where a L3 route target list is returned.
An entry in this table is created when the result of an OAM
'vprnTraceRoute' probe is determined.
An entry is removed from this table when its corresponding
tmnxOamTrCtlEntry is deleted. SEQUENCE OF TmnxOamVprnTrRTEntry .1.3.6.1.4.1.6527.3.1.2.11.2.14 |
tmnxOamVprnTrRTEntryDefines an entry in the tmnxOamVprnTrRTTable. The first two
index elements identify the tmnxOamTrCtlEntry that a
tmnxOamVprnTrRTEntry belongs to. The third index element
identifies an OAM trace route test run. The fouth, fifth and sixth
index elements select a single OAM 'vprnTraceRoute' reply.
The seventh index selects either the probe requestor's or
probe replier's route information. The eighth index selects
successive L3 route target entries contained in a specific
'vprnTraceRoute' requestor or probe reply route information. TmnxOamVprnTrRTEntry .1.3.6.1.4.1.6527.3.1.2.11.2.14.1 |
tmnxOamVprnTrRTIndexThe tmnxOamVprnTrRTIndex selects a single L3 route target entry
associated with the router information returned within a specific
'vprnTraceRoute' probe reply.
The agent starts assigning tmnxOamVprnTrRTIndex values at 1. Unsigned32 (1..'ffffffff'h) SYNTAX Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.14.1.1 |
tmnxOamVprnTrRouteTargetThe value of tmnxOamVprnTrRouteTarget is the route target ID
for this L3 route target entry.ro TmnxBgpRouteTarget (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.14.1.2 |
tmnxOamLspTrDSLabelTableDefines a table for storing the results of an OAM 'lspTraceRoute' or
'p2mpLspTrace' probe operation when a Downstream Mapping TLV was
returned. Each row represents a single downstream label within a
returned downstream L2 mapping TLV.
An entry in this table is created when the result of an OAM
'lspTraceRoute' or 'p2mpLspTrace' probe is determined.
An entry is removed from this table when its corresponding
tmnxOamTrCtlEntry is deleted. SEQUENCE OF TmnxOamLspTrDSLabelEntry .1.3.6.1.4.1.6527.3.1.2.11.2.15 |
tmnxOamLspTrDSLabelEntryDefines an entry in the tmnxOamLspTrDSLabelTable. The first
two index elements identify the tmnxOamTrCtlEntry that a
tmnxOamLspTrMapEntry belongs to. The third index element
identifies a OAM trace route test run. The fourth index element
selects the group of responses associated with a specific
probe attempt. The fifth and sixth indexes select the hop and
the probe at that hop for a particular Alcatel-Lucent SROS OAM
Trace Route operation. The seventh index selects a single downstream
L2 map entry within the specific probe reply. The eigth index
selects seccessive downstream L2 label entries contained in a
specific probe reply. TmnxOamLspTrDSLabelEntry .1.3.6.1.4.1.6527.3.1.2.11.2.15.1 |
tmnxOamLspTrDSLabelIndexThe tmnxOamLspTrDSLabelIndex selects a single downstream L2 label
entry within a specific L2 mapping entry reply.
The agent starts assigning tmnxOamLspTrDSLabelIndex values at 1. Unsigned32 (1..'ffffffff'h) SYNTAX Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.15.1.1 |
tmnxOamLspTrDSLabelLabelThe value of tmnxOamLspTrDSLabelLabel is the label used by the
downstream router specified by this downstream L2 label entry.ro MplsLabel (MPLS-LDP-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.15.1.2 |
tmnxOamLspTrDSLabelProtocolThe value of tmnxOamLspTrDSLabelProtocol is the signaling protocol
used by the router for the label specified by this downstream
L2 label entry.ro TmnxOamSignalProtocol .1.3.6.1.4.1.6527.3.1.2.11.2.15.1.3 |
tmnxOamMcastTrCtlTableEach row in tmnxOamMcastTrCtlTable contains the multicast-trace-route-
specific configuration information needed to launch a multicast trace
route test. The rest of the configuration information needed to
launch the test resides in the corresponding row of tmnxOamTrCtlTable.
Results of multicast trace route tests are stored in
tmnxOamTrResultsTable, tmnxOamTrProbeHistoryTable, and
tmnxOamMcastTrRespTable. SEQUENCE OF TmnxOamMcastTrCtlEntry .1.3.6.1.4.1.6527.3.1.2.11.2.16 |
tmnxOamMcastTrCtlEntryThe system creates a row in tmnxOamMcastTrCtlTable when a row is
created in tmnxOamTrCtlTable with tmnxOamTrCtlTestMode set to
'mcastTraceRoute'.
The system deletes a row in tmnxOamMcastTrCtlTable when the
corresponding row in tmnxOamTrCtlTable is deleted. TmnxOamMcastTrCtlEntry .1.3.6.1.4.1.6527.3.1.2.11.2.16.1 |
tmnxOamMcastTrCtlVRtrIDThe value of tmnxOamMcastTrCtlVRtrID specifies the virtual router to be
used for the test. The value specified must be the index of an active
row in TIMETRA-VRTR-MIB::vRtrConfTable.
tmnxOamTrCtlVRtrID (i.e. the equivalent object in the parent table) is
irrelevant when the test type is 'mcastTraceRoute'.
When directing an 'mcastTraceRoute' test to use a virtual router
associated with a VPRN service, the virtual router can be specified
using tmnxOamMcastTrCtlVRtrID (with the VPRN's virtual router number)
or tmnxOamTrCtlServiceId (with the VPRN's service number).
tmnxOamTrCtlServiceId is preferred, because service numbers are
constant across an SROS reboot (while virtual routers may be
renumbered). If non-default values are specified for both
tmnxOamMcastTrCtlVRtrID and tmnxOamTrCtlServiceId,
tmnxOamTrCtlServiceId is used.rw TmnxVRtrID (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.16.1.1 |
tmnxOamMcastTrCtlSrcIpAddrtmnxOamMcastTrCtlSrcIpAddr was obsoleted in release 4.0 and replaced
with InetAddress objects tmnxOamMcastTrCtlSrcAddrType and
tmnxOamMcastTrCtlSrcAddress.rwobsolete IpAddress .1.3.6.1.4.1.6527.3.1.2.11.2.16.1.2 |
tmnxOamMcastTrCtlDestIpAddrtmnxOamMcastTrCtlDestIpAddr was obsoleted in release 4.0 and replaced
with InetAddress objects tmnxOamMcastTrCtlDestAddrType and
tmnxOamMcastTrCtlDestAddress.rwobsolete IpAddress .1.3.6.1.4.1.6527.3.1.2.11.2.16.1.3 |
tmnxOamMcastTrCtlRespIpAddrtmnxOamMcastTrCtlRespIpAddr was obsoleted in release 4.0 and replaced
with InetAddress objects tmnxOamMcastTrCtlRespAddrType and
tmnxOamMcastTrCtlRespAddress.rwobsolete IpAddress .1.3.6.1.4.1.6527.3.1.2.11.2.16.1.4 |
tmnxOamMcastTrCtlGrpIpAddrtmnxOamMcastTrCtlGrpIpAddr was obsoleted in release 4.0 and replaced
with InetAddress objects tmnxOamMcastTrCtlGrpAddrType and
tmnxOamMcastTrCtlGrpAddress.rwobsolete IpAddress .1.3.6.1.4.1.6527.3.1.2.11.2.16.1.5 |
tmnxOamMcastTrCtlHopsThe value of tmnxOamMcastTrCtlHops specifies the maximum number of hops
that will be traced along the path to the source. This object is
optional.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.16.1.6 |
tmnxOamMcastTrQueryIdThe value of tmnxOamMcastTrQueryId indicates the 24 bit random number
that uniquely identifies the multicast trace query. When the router
receives the response back from the first hop router, it maps the
response to the query by looking at the query id in the packet.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.16.1.7 |
tmnxOamMcastTrCtlSrcAddrTypeThe value of tmnxOamMcastTrCtlSrcAddrType specifies the type of
Internet address stored in tmnxOamMcastTrCtlSrcAddress.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.16.1.8 |
tmnxOamMcastTrCtlSrcAddressThe value of tmnxOamMcastTrCtlSrcAddress specifies the Internet address
to be used as the source address for the 'mcastTraceRoute' test.
A non-empty address must be specified before the test is enabled.rw InetAddress .1.3.6.1.4.1.6527.3.1.2.11.2.16.1.9 |
tmnxOamMcastTrCtlDestAddrTypeThe value of tmnxOamMcastTrCtlDestAddrType specifies the type of
Internet address stored in tmnxOamMcastTrCtlDestAddress.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.16.1.10 |
tmnxOamMcastTrCtlDestAddressThe value of tmnxOamMcastTrCtlDestAddress specifies the Internet
address to be used as the destination address for the 'mcastTraceRoute'
test. The multicast trace query is sent to this destination address.
If this object is not set, the multicast trace starts from this
router.rw InetAddress .1.3.6.1.4.1.6527.3.1.2.11.2.16.1.11 |
tmnxOamMcastTrCtlRespAddrTypeThe value of tmnxOamMcastTrCtlRespAddrType specifies the type of
Internet address stored in tmnxOamMcastTrCtlRespAddress.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.16.1.12 |
tmnxOamMcastTrCtlRespAddressThe value of tmnxOamMcastTrCtlRespAddress specifies the Internet
address to be used as the response address for the 'mcastTraceRoute'
test. If this object is not set, the system IP address is used as the
response address.rw InetAddress .1.3.6.1.4.1.6527.3.1.2.11.2.16.1.13 |
tmnxOamMcastTrCtlGrpAddrTypeThe value of tmnxOamMcastTrCtlGrpAddrType specifies the type of
Internet address stored in tmnxOamMcastTrCtlGrpAddress.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.16.1.14 |
tmnxOamMcastTrCtlGrpAddressThe value of tmnxOamMcastTrCtlGrpAddress specifies the Internet
multicast group address for the 'mcastTraceRoute' test.
A non-empty address must be specified before the test is enabled.rw InetAddress .1.3.6.1.4.1.6527.3.1.2.11.2.16.1.15 |
tmnxOamMcastTrRespTableDefines the Alcatel-Lucent SROS OAM Multicast Trace Route Response
Table for providing, via SNMP, the result of OAM 'mcastTraceRoute' test
operation. The results of these tests are stored in the
tmnxOamTrResultsTable, the tmnxOamTrProbeHistoryTable and
the tmnxOamMcastTrRespTable. SEQUENCE OF TmnxOamMcastTrRespEntry .1.3.6.1.4.1.6527.3.1.2.11.2.17 |
tmnxOamMcastTrRespEntryDefines an entry in the tmnxOamMcastTrRespTable.
The first two index elements identify the tmnxOamTrCtlEntry that
a tmnxOamMcastTrRespEntry belongs to. The third index element
selects an OAM trace route test run. The fourth index element
selects a single Alcatel-Lucent SROS OAM Trace Route operation result.
The fifth and sixth indexes select the hop and the probe at that
hop for a particular Alcatel-Lucent SROS OAM Trace Route operation. TmnxOamMcastTrRespEntry .1.3.6.1.4.1.6527.3.1.2.11.2.17.1 |
tmnxOamMcastTrRespQueryArrivalTimetmnxOamMcastTrRespQueryArrivalTime specifies the 32 bit NTP timestamp.
It is the time at which a particular hop received the Multicast
Trace query/request.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.17.1.1 |
tmnxOamMcastTrRespInIfAddrtmnxOamMcastTrRespInIfAddr specifies the address of the interface on
which packets from this source and group are expected to arrive.
This object was obsoleted in release 4.0 and replaced with
InetAddress objects tmnxOamMcastTrRespInIfAddrType and
tmnxOamMcastTrRespInIfAddress.roobsolete IpAddress .1.3.6.1.4.1.6527.3.1.2.11.2.17.1.2 |
tmnxOamMcastTrRespOutIfAddrtmnxOamMcastTrRespOutIfAddr specifies the address of the interface on
which packets from this source and group flow to the specified
destination.
This object was obsoleted in release 4.0 and replaced with
InetAddress objects tmnxOamMcastTrRespOutIfAddrType and
tmnxOamMcastTrRespOutIfAddress.roobsolete IpAddress .1.3.6.1.4.1.6527.3.1.2.11.2.17.1.3 |
tmnxOamMcastTrRespPrevHopRtrAddrtmnxOamMcastTrRespPrevHopRtrAddr specifies the router from which this
router expects packets from this source. This may be a multicast
group (e.g. ALL-[protocol]-ROUTERS.MCAST.NET) if the previous hop is
not known because of the workings of the multicast routing protocol.
This object was obsoleted in release 4.0 and replaced with
InetAddress objects tmnxOamMcastTrRespPhRtrAddrType and
tmnxOamMcastTrRespPhRtrAddress.roobsolete IpAddress .1.3.6.1.4.1.6527.3.1.2.11.2.17.1.4 |
tmnxOamMcastTrRespInPktCounttmnxOamMcastTrRespInPktCount contains the number of multicast packets
received for all groups and sources on the incoming interface, or
0xffffffff if no count can be reported. This counter should have the
same value as ifInMulticastPkts from the IF-MIB for this interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.11.2.17.1.5 |
tmnxOamMcastTrRespOutPktCounttmnxOamMcastTrRespOutPktCount contains the number of multicast packets
that have been transmitted or queued for transmission for all groups
and sources on the outgoing interface, or 0xffffffff if no count can
be reported. This counter should have the same value as
ifOutMulticastPkts from the IF-MIB for this interface.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.11.2.17.1.6 |
tmnxOamMcastTrRespSGPktCounttmnxOamMcastTrRespSGPktCount counts the number of packets from the
specified source forwarded by this router to the specified group,
or 0xffffffff if no count can be reported. If the value of
tmnxOamMcastTrRespSrcBit is set to one, the count is for the source
network, as specified by tmnxOamMcastTrRespSrcMask.
If the S bit is set and the Src Mask field is 63, indicating no
source-specific state, the count is for all sources sending to
this group.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.11.2.17.1.7 |
tmnxOamMcastTrRespRtgProtocoltmnxOamMcastTrRespRtgProtocol describes the routing protocol in use
between this router and the previous-hop router.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.11.2.17.1.8 |
tmnxOamMcastTrRespFwdTtltmnxOamMcastTrRespFwdTtl contains the TTL that a packet is required
to have before it will be forwarded over the outgoing interface.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.17.1.9 |
tmnxOamMcastTrRespMBZBittmnxOamMcastTrRespMBZBit is zeroed on transmission and ignored on
reception.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.17.1.10 |
tmnxOamMcastTrRespSrcBitIf the value of tmnxOamMcastTrRespSrcBit is 1, it indicates that the
packet count for the source-group pair is for the source network, as
determined by masking the source address with
the tmnxOamMcastTrRespSrcMask field.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.17.1.11 |
tmnxOamMcastTrRespSrcMasktmnxOamMcastTrRespSrcMask contains the number of 1's in the netmask
this router has for the source (i.e. a value of 24 means the netmask is
0xffffff00). If the router is forwarding solely on group state,
this field is set to 63 (0x3f).ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.17.1.12 |
tmnxOamMcastTrRespFwdCodetmnxOamMcastTrRespFwdCode contains a forwarding information/error
code:
noError(0) - No error
wrongIf(1) - Traceroute request arrived on an interface to
which this router would not forward for this
source,group,destination.
pruneSent(2) - This router has sent a prune upstream which
applies to the source and group in the traceroute
request.
pruneRecvd(3) - This router has stopped forwarding for this
source and group in response to a request from
the next hop router.
scoped(4) - The group is subject to administrative scoping
at this hop.
noRoute(5) - This router has no route for the source or
group and no way to determine a potential route.
wrongLastHop(6) - This router is not the proper last-hop router.
notForwarding(7) - This router is not forwarding this
source,group out the outgoing interface for an
unspecified reason.
reachedRP(8) - Reached Rendez-vous Point or Core
rpfIf(9) - Traceroute request arrived on the expected RPF
interface for this source,group.
noMulticast(10) - Traceroute request arrived on an interface
which is not enabled for multicast.
infoHidden(11) - One or more hops have been hidden from this trace.
fatalError(12) - Router may know the previous hop but cannot forward
the message to it.
noSpace(129) - There was not enough room to insert another
response data block in the packet.
oldRouter(130) - The previous hop router does not understand
traceroute requests
adminProhib(131) - Traceroute is administratively prohibited.
unknown(132) - Unknown forwarding code received.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.11.2.17.1.13 |
tmnxOamMcastTrRespInIfAddrTypetmnxOamMcastTrRespInIfAddrType specifies the type of Internet
address stored at tmnxOamMcastTrRespInIfAddress.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.17.1.14 |
tmnxOamMcastTrRespInIfAddresstmnxOamMcastTrRespInIfAddress specifies the Internet address of
the interface on which packets from this source and group are
expected to arrive.ro InetAddress .1.3.6.1.4.1.6527.3.1.2.11.2.17.1.15 |
tmnxOamMcastTrRespOutIfAddrTypetmnxOamMcastTrRespOutIfAddrType specifies the type of Internet
address stored in tmnxOamMcastTrRespOutIfAddress.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.17.1.16 |
tmnxOamMcastTrRespOutIfAddresstmnxOamMcastTrRespOutIfAddress specifies the Internet address
of the interface on which packets from this source and group
flow to the specified destination.ro InetAddress .1.3.6.1.4.1.6527.3.1.2.11.2.17.1.17 |
tmnxOamMcastTrRespPhRtrAddrTypetmnxOamMcastTrRespPhRtrAddrType specifies the type of internet
address stored in tmnxOamMcastTrRespPhRtrAddress.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.17.1.18 |
tmnxOamMcastTrRespPhRtrAddresstmnxOamMcastTrRespPhRtrAddress specifies the Internet address of
the router from which this router expects packets for this source.
This may be a multicast group (e.g. ALL-[protocol]-ROUTERS.MCAST.NET)
if the previous hop is not known because of the workings of the
multicast routing protocol.ro InetAddress .1.3.6.1.4.1.6527.3.1.2.11.2.17.1.19 |
tmnxOamLTtraceCtlTabletmnxOamLTtraceCtlTable defines the Alcatel-Lucent SROS OAM LDP
Tree Trace Control Table for providing, via SNMP, the
capability of performing Alcatel-Lucent SROS OAM 'ldpTreeTrace'
manual test operations. The results of these tests are stored
in the tmnxOamLTtraceResultsTable and the
tmnxOamLTtraceHopInfoTable. SEQUENCE OF TmnxOamLTtraceCtlEntry .1.3.6.1.4.1.6527.3.1.2.11.2.18 |
tmnxOamLTtraceCtlEntrytmnxOamLTtraceCtlEntry represents a row in the
tmnxOamLTtraceCtlTable. The first index element,
tmnxOamTrCtlOwnerIndex, is of type SnmpAdminString,
a textual convention that allows for use of the
SNMPv3 View-Based Access Control Model (RFC 2575 [11], VACM)
and allows a management application to identify its entries.
The second index, tmnxOamTrCtlTestIndex, enables the same
management application to have multiple outstanding requests. TmnxOamLTtraceCtlEntry .1.3.6.1.4.1.6527.3.1.2.11.2.18.1 |
tmnxOamLTtraceCtlLdpPrefixTypeThe value of tmnxOamLTtraceCtlLdpPrefixType specifies the
type of Internet address stored in tmnxOamLTtraceCtlLdpPrefix.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.18.1.2 |
tmnxOamLTtraceCtlLdpPrefixThe value of tmnxOamLTtraceCtlLdpPrefix specifies the
Internet address prefix for the LDP based LSP for this
OAM LDP Tree discovery test.rw InetAddress .1.3.6.1.4.1.6527.3.1.2.11.2.18.1.3 |
tmnxOamLTtraceCtlLdpPrefixLenThe value of tmnxOamLTtraceCtlLdpPrefixLen specifies the Internet
address prefix length for the LDP based LSP for this OAM LDP Tree
discovery test.
The value of this parameter is valid only when LDP IP Prefix
has been specified.rw InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.18.1.4 |
tmnxOamLTtraceCtlMaxPathThe value of tmnxOamLTtraceCtlMaxPath specifies the maximum number
of paths that can be discovered for the given LDP Prefix
(tmnxOamLTtraceCtlLdpPrefix).rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.18.1.5 |
tmnxOamLTtraceCtlDownstreamMpTlvThe value of tmnxOamLTtraceCtlDownstreamMpTlv specifies the type of
downstream mapping TLV to insert in the MPLS echo request PDUs when
launching the test.
When an LDP tree trace test is created, the value of this object
defaults to the value of the global configuration object
tmnxOamMplsEchoDownstreamMapTlv.rw TmnxOamMplsEchoDownMapTlv .1.3.6.1.4.1.6527.3.1.2.11.2.18.1.6 |
tmnxOamLTtraceMaxConRequestsThe value of tmnxOamLTtraceMaxConRequests indicates the
maximum number of concurrent LDP Tree Trace manual discovery
sessions that are allowed within an agent implementation.ro Unsigned32 UNITS "requests" .1.3.6.1.4.1.6527.3.1.2.11.2.19 |
tmnxOamLTtraceResultsTabletmnxOamLTtraceResultsTable defines the Alcatel-Lucent SROS OAM
Trace Route Test Results Table for keeping track of the status
of a tmnxOamTrCtlEntry having tmnxOamTrCtlTestMode as ldpTreeTrace.
An entry is added to the tmnxOamLTtraceResultsTable when an
tmnxOamTrCtlEntry is created with tmnxOamTrCtlTestMode having
value 'ldpTreeTrace'.
An entry is removed from the tmnxOamTrResultsTable when
such a corresponding entry, tmnxOamTrCtlEntry, is deleted. SEQUENCE OF TmnxOamLTtraceResultsEntry .1.3.6.1.4.1.6527.3.1.2.11.2.20 |
tmnxOamLTtraceResultsEntrytmnxOamLTtraceResultsEntry represents a row in the
tmnxOamLTtraceResultsTable. The two indices of the
tmnxOamLTtraceResultsTable are the same as that in the
tmnxOamTrCtlTable in order for a tmnxOamLTtraceResultsEntry to
correspond to the tmnxOamTrCtlEntry that caused it to be
created. TmnxOamLTtraceResultsEntry .1.3.6.1.4.1.6527.3.1.2.11.2.20.1 |
tmnxOamLTtraceResultsDisPathsThe value of tmnxOamLTtraceResultsDisPaths indicates the number of
discovered ECMP paths in this OAM LDP Tree discovery test.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.20.1.2 |
tmnxOamLTtraceResultsFailedHopsThe value of tmnxOamLTtraceResultsFailedHops indicates the number
of hops from which no successful response was received during
this OAM LDP Tree discovery test.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.20.1.3 |
tmnxOamLTtraceResultsDisStateThe value of tmnxOamLTtraceResultsDisState indicates the current
state of the discovery process for the LDP IP prefix
(tmnxOamLTtraceCtlLdpPrefix) in this OAM LDP Tree discovery test.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.11.2.20.1.4 |
tmnxOamLTtraceResultsDisStatusThe value of tmnxOamLTtraceResultsDisStatus indicates the current
discovery status bits for the LDP IP prefix
(tmnxOamLTtraceCtlLdpPrefix) in this OAM LDP Tree discovery test.ro TmnxOamLTtraceDisStatusBits .1.3.6.1.4.1.6527.3.1.2.11.2.20.1.5 |
tmnxOamLTtraceHopInfoTabletmnxOamLTtraceHopInfoTable defines the Alcatel-Lucent SROS OAM LDP
Trace Hops table for keeping track of the results of an LDP Tree Trace
test on a per hop basis.
An entry is added to the tmnxOamLTtraceHopInfoTable when a
hop is discovered after setting the tmnxOamTrCtlAdminStatus
object of the tmnxOamTrCtlEntry (having tmnxOamTrCtlTestMode
as ldpTreeTrace) to 'enabled(1)'. An entry is removed from the
tmnxOamLTtraceHopInfoTable when its corresponding tmnxOamTrCtlEntry
is deleted. SEQUENCE OF TmnxOamLTtraceHopInfoEntry .1.3.6.1.4.1.6527.3.1.2.11.2.21 |
tmnxOamLTtraceHopInfoEntrytmnxOamLTtraceHopInfoEntry represents a row in the
tmnxOamLTtraceHopInfoTable. The first two indices of the
tmnxOamLTtraceHopInfoTable are the same as the tmnxOamTrCtlTable in
order for a tmnxOamLTtraceHopInfoEntry to correspond to the
tmnxOamTrCtlEntry that caused it to be created. The third index
element, tmnxOamLTtraceHopIndex, selects a hop in an Alcatel-Lucent
SROS LDP Tree Trace discovered path. TmnxOamLTtraceHopInfoEntry .1.3.6.1.4.1.6527.3.1.2.11.2.21.1 |
tmnxOamLTtraceHopIndexThe value of tmnxOamLTtraceHopIndex indicates the hop index
for an Alcatel-Lucent SROS OAM Trace hop for an LDP Tree Trace test.
The hop index values are assigned starting at 1. Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.21.1.1 |
tmnxOamLTtraceUpStreamHopIndexThe value of tmnxOamLTtraceUpStreamHopIndex indicates the
hop index (tmnxOamLTtraceHopIndex) of its upstream hop
discovered during the LDP Tree Trace test. The value of
tmnxOamLTtraceUpStreamHopIndex is 0 for the hops which are
the root of the different discovered paths for the LDP
Tree Trace test.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.21.1.2 |
tmnxOamLTtraceHopAddrTypeThe value of tmnxOamLTtraceHopAddrType indicates the type of
Internet address stored in tmnxOamLTtraceHopAddr.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.21.1.3 |
tmnxOamLTtraceHopAddrThe value of tmnxOamLTtraceHopAddr indicates the IP address
of a hop for a given LDP based LSP associated with the
OAM LDP Tree trace test.ro InetAddress .1.3.6.1.4.1.6527.3.1.2.11.2.21.1.4 |
tmnxOamLTtraceHopDstAddrTypeThe value of tmnxOamLTtraceHopDstAddrType indicates the type of
Internet address stored in tmnxOamLTtraceHopDstAddr.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.21.1.5 |
tmnxOamLTtraceHopDstAddrThe value of tmnxOamLTtraceHopDstAddr indicates the destination
IP address (127 Address) of a path associated with the hop.ro InetAddress .1.3.6.1.4.1.6527.3.1.2.11.2.21.1.6 |
tmnxOamLTtraceHopEgrNhAddrTypeThe value of tmnxOamLTtraceHopEgrNhAddrType indicates the type of
Internet address stored in tmnxOamLTtraceHopEgrNhAddr.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.21.1.7 |
tmnxOamLTtraceHopEgrNhAddrThe value of tmnxOamLTtraceHopEgrNhAddr indicates the
next hop IP address (wrt the ingress router), which is used
to reach this Hop (tmnxOamLTtraceHopAddr).ro InetAddress .1.3.6.1.4.1.6527.3.1.2.11.2.21.1.8 |
tmnxOamLTtraceHopDisTtlThe value of tmnxOamLTtraceHopDisTtl indicates the label time-to-live
value used to discover this hop.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.21.1.9 |
tmnxOamLTtraceHopLastRcThe value of tmnxOamLTtraceHopLastRc indicates the OAM return code
received in the OAM trace response.ro TmnxOamPingRtnCode .1.3.6.1.4.1.6527.3.1.2.11.2.21.1.10 |
tmnxOamLTtraceHopDiscoveryStateThe value of tmnxOamLTtraceHopDiscoveryState indicates the current
discovery state of this hop.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.11.2.21.1.11 |
tmnxOamLTtraceHopDiscoveryTimeThe value of tmnxOamLTtraceHopDiscoveryTime indicates the sysUpTime
when the hop was discovered.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.2.21.1.12 |
tmnxOamLTtraceHopLabel1The value of tmnxOamLTtraceHopLabel1 indicates the first (top of the
label stack) label for this hop.ro MplsLabel (MPLS-LDP-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.21.1.13 |
tmnxOamLTtraceHopLabel2The value of tmnxOamLTtraceHopLabel2 indicates the second label for
this hop.ro MplsLabel (MPLS-LDP-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.21.1.14 |
tmnxOamLTtraceHopLabel3The value of tmnxOamLTtraceHopLabel3 indicates the third label for this
hop.ro MplsLabel (MPLS-LDP-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.21.1.15 |
tmnxOamLTtraceHopLabel4The value of tmnxOamLTtraceHopLabel4 indicates the fourth label for
this hop.ro MplsLabel (MPLS-LDP-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.21.1.16 |
tmnxOamLTtraceHopLabel5The value of tmnxOamLTtraceHopLabel5 indicates the fifth label for this
hop.ro MplsLabel (MPLS-LDP-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.21.1.17 |
tmnxOamLTtraceHopLabel6The value of tmnxOamLTtraceHopLabel6 indicates the sixth label for this
hop.ro MplsLabel (MPLS-LDP-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.21.1.18 |
tmnxOamLTtraceHopIfAddrTypeThe value of tmnxOamLTtraceHopIfAddrType indicates the IP address type
for the interface IP address for this hop.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.21.1.19 |
tmnxOamLTtraceHopIfAddressThe value of tmnxOamLTtraceHopIfAddress indicates the IP Address for
the interface for this hop.ro InetAddress .1.3.6.1.4.1.6527.3.1.2.11.2.21.1.20 |
tmnxOamLTtraceHopRouterIdTypeThe value of tmnxOamLTtraceHopRouterIdType indicates the IP address
type for the Router ID for this hop.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.21.1.21 |
tmnxOamLTtraceHopRouterIdThe value of tmnxOamLTtraceHopRouterId indicates the IP Address for
the Router ID for this hop.ro InetAddress .1.3.6.1.4.1.6527.3.1.2.11.2.21.1.22 |
tmnxOamLTtraceAutoConfigTabletmnxOamLTtraceAutoConfigTable contains an entry for configuration
information about each instance of Automatic (background) LDP Tree
Trace. SEQUENCE OF TmnxOamLTtraceAutoConfigEntry .1.3.6.1.4.1.6527.3.1.2.11.2.22 |
tmnxOamLTtraceAutoConfigEntrytmnxOamLTtraceAutoConfigEntry represents a row in the
tmnxOamLTtraceAutoConfigTable. Each entry represents the
Automatic LDP Tree Trace instance running on a virtual router.
A row entry can be created and deleted through the
tmnxOamLTtraceAutoRowStatus object. TmnxOamLTtraceAutoConfigEntry .1.3.6.1.4.1.6527.3.1.2.11.2.22.1 |
tmnxOamLTtraceAutoRowStatusThe value of tmnxOamLTtraceAutoRowStatus specifies the row status of
the Auto LDP Tree Trace instance for the virtual router.
A row with default attribute values is created by setting
tmnxOamLTtraceAutoRowStatus to 'createAndGo'. A row entry can be
destroyed by setting tmnxOamLTtraceAutoRowStatus to 'destroy'. An
attempt to destroy a row will fail if tmnxOamLTtraceAutoAdminState
is not set to 'outOfService'.
Deletion of an entry in this table results in deletion
of all the corresponding tables: tmnxOamLTtraceAutoStatusTable,
tmnxOamLTtraceFecInfoTable, and tmnxOamLTtracePathInfoTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.2.22.1.1 |
tmnxOamLTtraceAutoLastChangedThe value of tmnxOamLTtraceAutoLastChanged indicates the last time
the value of a writable object in this row was modified.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.2.22.1.2 |
tmnxOamLTtraceAutoStorageTypeThe value of tmnxOamLTtraceAutoStorageType specifies the storage type
for this conceptual row. Conceptual rows having the value 'permanent'
need not allow write-access to any columnar objects in the row.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.2.22.1.3 |
tmnxOamLTtraceAutoAdminStateThe value of tmnxOamLTtraceAutoAdminState specifies the state based on
which the Auto LDP Tree Discovery process starts or stops.
When the tmnxOamLTtraceAutoAdminState becomes 'inService',
the Auto LDP Tree Discovery process starts, and periodic
path-probing on the previously discovered paths, if any, continues.
When the tmnxOamLTtraceAutoAdminState becomes 'outOfService',
the Auto LDP Tree Discovery process and periodic path-probing
on the discovered paths stop.
At the start of the Auto discovery process, it selects the
address FECs imported from LDP peers (TIMETRA-LDP-MIB::
vRtrLdpAddrFecTable) provided the FECs pass the configured policies
(tmnxOamLTtraceAutoPolicy1..tmnxOamLTtraceAutoPolicy5). For all the
FECs (tmnxOamLTtraceAutoTotalFecs), it automatically
creates entries from the tmnxOamLTtraceFecInfoTable. As a part of
the auto discovery process, it creates entries from the
tmnxOamLTtracePathInfoTable for each discovered path.rw TmnxAdminState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.22.1.4 |
tmnxOamLTtraceAutoFcNameThe value of tmnxOamLTtraceAutoFcName specifies the forwarding class
of the MPLS Echo request packets.
The forwarding class name must be one of those defined in the
tFCNameTable in TIMETRA-QOS-MIB. The agent creates predefined
entries in the tFCNameTable for 'premium', 'assured', and 'be'
(for best-effort) forwarding classes. The actual forwarding
class encoding is controlled by the network egress LSP-EXP
mappings.rw TFCName (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.22.1.5 |
tmnxOamLTtraceAutoProfileThe value of tmnxOamLTtraceAutoProfile specifies the profile
value to be used with the forwarding class specified in
tmnxOamLTtraceAutoFcName.
The profile value must be consistent with the specified forwarding
class:
'assured' = 'in' or 'out'
'premium' = 'in'
'be' = 'out'rw TProfile (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.22.1.6 |
tmnxOamLTtraceAutoDiscIntvlThe value of tmnxOamLTtraceAutoDiscIntvl specifies number of
minutes to wait before repeating LDP Tree Auto Discovery process.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.22.1.7 |
tmnxOamLTtraceAutoMaxPathThe value of tmnxOamLTtraceAutoMaxPath specifies the maximum
number of paths that can be discovered for a selected IP Address
FEC (tmnxOamLTtraceAutoTotalFecs).rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.22.1.8 |
tmnxOamLTtraceAutoTrMaxTtlThe value of tmnxOamLTtraceAutoTrMaxTtl specifies the maximum
label time-to-live value for an LSP trace request during the tree
discovery.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.22.1.9 |
tmnxOamLTtraceAutoTrTimeOutThe value of tmnxOamLTtraceAutoTrTimeOut specifies the time-out
value, in seconds, for an lsp trace request during the tree discovery.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.22.1.10 |
tmnxOamLTtraceAutoTrMaxFailuresThe value of tmnxOamLTtraceAutoTrMaxFailures specifies the maximum
number of consecutive timeouts allowed before terminating an lsp trace
request to a hop.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.22.1.11 |
tmnxOamLTtraceAutoPolicy1The value of tmnxOamLTtraceAutoPolicy1 specifies the first
policy used to filter LDP imported Address FECs.rw TPolicyStatementNameOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.22.1.12 |
tmnxOamLTtraceAutoPolicy2The value of tmnxOamLTtraceAutoPolicy2 specifies the second
policy used to filter LDP imported Address FECs.rw TPolicyStatementNameOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.22.1.13 |
tmnxOamLTtraceAutoPolicy3The value of tmnxOamLTtraceAutoPolicy3 specifies the third
policy used to filter LDP imported Address FECs.rw TPolicyStatementNameOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.22.1.14 |
tmnxOamLTtraceAutoPolicy4The value of tmnxOamLTtraceAutoPolicy4 specifies the fourth
policy used to filter LDP imported Address FECs.rw TPolicyStatementNameOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.22.1.15 |
tmnxOamLTtraceAutoPolicy5The value of tmnxOamLTtraceAutoPolicy5 specifies the fifth
policy used to filter LDP imported Address FECs.rw TPolicyStatementNameOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.22.1.16 |
tmnxOamLTtraceAutoProbeIntvlThe value of tmnxOamLTtraceAutoProbeIntvl specifies the number
of minutes to wait before repeating probing (pinging) a discovered
path.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.22.1.17 |
tmnxOamLTtraceAutoPrTimeOutThe value of tmnxOamLTtraceAutoPrTimeOut specifies the time-out
value, in minutes, for a ping request during probing.
tmnxOamLTtraceAutoPrTimeOut cannot be greater than
tmnxOamLTtraceAutoProbeIntvl.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.22.1.18 |
tmnxOamLTtraceAutoPrMaxFailuresThe value of tmnxOamLTtraceAutoPrMaxFailures specifies the
maximum number of consecutive timeouts allowed before failing a path
probe (ping).rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.22.1.19 |
tmnxOamLTtraceAutoStatusTabletmnxOamLTtraceAutoStatusTable contains an entry for operational
information about each instance of Automatic (background) LDP
Tree Trace. SEQUENCE OF TmnxOamLTtraceAutoStatusEntry .1.3.6.1.4.1.6527.3.1.2.11.2.23 |
tmnxOamLTtraceAutoStatusEntrytmnxOamLTtraceAutoStatusEntry represents a row in the
tmnxOamLTtraceAutoStatusTable.
Entries cannot be created or deleted via snmp SET operations.
An entry is created whenever a row is created in
tmnxOamLTtraceAutoConfigTable. TmnxOamLTtraceAutoStatusEntry .1.3.6.1.4.1.6527.3.1.2.11.2.23.1 |
tmnxOamLTtraceAutoDiscoveryStateThe value of tmnxOamLTtraceAutoDiscoveryState indicates the current
state of the discovery process.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.11.2.23.1.1 |
tmnxOamLTtraceAutoTotalFecsThe value of tmnxOamLTtraceAutoTotalFecs indicates the number of
Address FECs that have been selected for discovery during the
current discovery process.
An Address FEC imported from an LDP peer
(TIMETRA-LDP-MIB:: vRtrLdpAddrFecTable)is selected if it passes
the associated policies (tmnxOamLTtraceAutoPolicy1..
tmnxOamLTtraceAutoPolicy5).ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.23.1.2 |
tmnxOamLTtraceAutoDisFecsThe value of tmnxOamLTtraceAutoDisFecs indicates the number of
selected Address FECs that have been discovered successfully
during the current discovery process.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.23.1.3 |
tmnxOamLTtraceAutoLastDisStartThe value of tmnxOamLTtraceAutoLastDisStart indicates the
sysUpTime when the last Auto discovery process started. If
no discovery process has started, the value will be 0.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.2.23.1.4 |
tmnxOamLTtraceAutoLastDisEndThe value of tmnxOamLTtraceAutoLastDisEnd indicates the
sysUpTime when the last Auto discovery process ended. Before
the first discovery process ends, it would be 0. At the end of a
discovery this value is set. This value is not reset during
starting/restarting.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.2.23.1.5 |
tmnxOamLTtraceAutoLastDisDurThe value of tmnxOamLTtraceAutoLastDisDur indicates the time
(in seconds) it took to finish the last discovery process.If no test
has been finished, the value is 0. This value is updated only when
a discovery ends.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.11.2.23.1.6 |
tmnxOamLTtraceFecInfoTabletmnxOamLTtraceFecInfoTable contains entries for the operational
information about the automatically selected FECs. SEQUENCE OF TmnxOamLTtraceFecInfoEntry .1.3.6.1.4.1.6527.3.1.2.11.2.24 |
tmnxOamLTtraceFecInfoEntrytmnxOamLTtraceFecInfoEntry represents a row in the
tmnxOamLTtraceFecInfoTable.
Entries cannot be created and deleted via SNMP SET operations. TmnxOamLTtraceFecInfoEntry .1.3.6.1.4.1.6527.3.1.2.11.2.24.1 |
tmnxOamLTtraceFecPrefixTypeThe value of tmnxOamLTtraceFecPrefixType specifies the type of
remote IP address stored in tmnxOamLTtraceFecPrefix. Currently
only ipv4 type is supported. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.24.1.1 |
tmnxOamLTtraceFecPrefixThe value of tmnxOamLTtraceFecPrefix indicates the Internet address
prefix for an LDP based LSP associated with the OAM LDP Tree trace
test. InetAddress .1.3.6.1.4.1.6527.3.1.2.11.2.24.1.2 |
tmnxOamLTtraceFecPrefLenThe value of tmnxOamLTtraceFecPrefLen indicates the Internet
address prefix length for the LDP based LSP associated with the OAM
LDP Tree trace test. InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.24.1.3 |
tmnxOamLTtraceFecDiscoveryStateThe value of tmnxOamLTtraceFecDiscoveryState indicates the current
state of the discovery process for the Address FEC.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.11.2.24.1.4 |
tmnxOamLTtraceFecDisStatusBitsThe value of tmnxOamLTtraceFecDisStatusBits indicates the current
discovery status bits for the Address FEC.ro TmnxOamLTtraceDisStatusBits .1.3.6.1.4.1.6527.3.1.2.11.2.24.1.5 |
tmnxOamLTtraceFecDisPathsThe value of tmnxOamLTtraceFecDisPaths indicates the number of
discovered ECMP paths for the Address FEC.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.24.1.6 |
tmnxOamLTtraceFecFailedHopsThe value of tmnxOamLTtraceFecFailedHops indicates the number of
hops from which no successful response was received.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.24.1.7 |
tmnxOamLTtraceFecLastDisEndThe value of tmnxOamLTtraceFecLastDisEnd indicates the sysUpTime
when the FEC was last discovered.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.2.24.1.8 |
tmnxOamLTtraceFecFailedProbesThe value of tmnxOamLTtraceFecFailedProbes indicates the number of
discovered paths which are in failed probing state.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.24.1.9 |
tmnxOamLTtraceFecProbeStateThe value of tmnxOamLTtraceFecProbeState indicates the current
overall probing state for the discovered paths of the Address FEC.
The tmnxOamLTtraceFecProbeState is considered as 'oK' when
probing on all the associated discovered paths is OK.
It is considered as 'failed' when probing on all the associated
discovered paths failed. It is considered as partially failed
when probing on one or more, but not all, discovered paths failed.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.11.2.24.1.10 |
tmnxOamLTtraceFecSendErrProbesThe value of tmnxOamLTtraceFecSendErrProbes indicates the number of
discovered paths which are experiencing problems in sending probe
(ping) requests.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.24.1.11 |
tmnxOamLTtracePathInfoTabletmnxOamLTtracePathInfoTable contains entries with operational
information about the automatically discovered ECMP paths. SEQUENCE OF TmnxOamLTtracePathInfoEntry .1.3.6.1.4.1.6527.3.1.2.11.2.25 |
tmnxOamLTtracePathInfoEntrytmnxOamLTtracePathInfoEntry represents a row in the
tmnxOamLTtracePathInfoTable.
Entries cannot be created and deleted via SNMP SET operations. TmnxOamLTtracePathInfoEntry .1.3.6.1.4.1.6527.3.1.2.11.2.25.1 |
tmnxOamLTtracePathDstAddrTypeThe value of tmnxOamLTtracePathDstAddrType indicates the type of
Internet address stored in tmnxOamLTtracePathDstAddr. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.25.1.1 |
tmnxOamLTtracePathDstAddrThe value of tmnxOamLTtracePathDstAddr indicates the destination
IP address (127 Address) of a path for a given LDP based LSP
associated with the OAM LDP Tree trace test. InetAddress .1.3.6.1.4.1.6527.3.1.2.11.2.25.1.2 |
tmnxOamLTtracePathRemAddrTypeThe value of tmnxOamLTtracePathRemAddrType indicates the type of
Internet address stored in tmnxOamLTtracePathRemoteAddr.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.25.1.3 |
tmnxOamLTtracePathRemoteAddrThe value of tmnxOamLTtracePathRemoteAddr indicates the associated
interface IP address or the router ID of the egress router.ro InetAddress .1.3.6.1.4.1.6527.3.1.2.11.2.25.1.4 |
tmnxOamLTtracePathEgrNhAddrTypeThe value of tmnxOamLTtracePathEgrNhAddrType indicates the type of
Internet address stored in tmnxOamLTtracePathEgrNhAddr.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.25.1.5 |
tmnxOamLTtracePathEgrNhAddrThe value of tmnxOamLTtracePathEgrNhAddr indicates the
next hop IP address (wrt the ingress router) used to reach the
associated ECMP path endpoint.ro InetAddress .1.3.6.1.4.1.6527.3.1.2.11.2.25.1.6 |
tmnxOamLTtracePathDisTtlThe value of tmnxOamLTtracePathDisTtl indicates the label
time-to-live value used to discover the egress router for
the path.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.25.1.7 |
tmnxOamLTtracePathLastDisTimeThe value of tmnxOamLTtracePathLastDisTime indicates the sysUpTime
when the path was last discovered.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.2.25.1.8 |
tmnxOamLTtracePathLastRcThe value of tmnxOamLTtracePathLastRc indicates the OAM return code
received in the OAM ping response.ro TmnxOamPingRtnCode .1.3.6.1.4.1.6527.3.1.2.11.2.25.1.9 |
tmnxOamLTtracePathProbeStateThe value of tmnxOamLTtracePathProbeState indicates the current
probing (ping) state for the discovered ECMP path.
The tmnxOamLTtracePathProbeState is considered as 'failed' when
number of consecutive timeouts for the ping request reached its
maximum allowed limit (tmnxOamLTtraceAutoPrMaxFailures).
The tmnxOamLTtracePathProbeState is considered as 'oK' after receiving
a successful ping response for the associated path.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.11.2.25.1.10 |
tmnxOamLTtracePathProbeTmOutCntThe value of tmnxOamLTtracePathProbeTmOutCnt indicates the number of
consecutive timeouts for the associated ping request.
This tmnxOamLTtracePathProbeTmOutCnt is reset to 0
after receiving a successful ping response from the path
destination.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.25.1.11 |
tmnxOamLTtracePathProbeSendErrThe value of tmnxOamLTtracePathProbeSendErr indicates the state of the
last path probe (ping) request.
The tmnxOamLTtracePathProbeSendErr is considered as 'failed' if the
last probe (ping) request could not be sent due to some local failure
else it is 'oK'.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.11.2.25.1.12 |
tmnxOamVccvTrCtlTableDefines the Alcatel-Lucent SROS OAM VCCV Trace Control Table for
providing, via SNMP, the capability of performing Alcatel-Lucent
SROS OAM 'vccvTraceRoute' test operations. The results of these
tests are stored in the tmnxOamTrResultsTable, the
tmnxOamTrProbeHistoryTable and the tmnxOamVccvTrNextPwSegmentTable. SEQUENCE OF TmnxOamVccvTrCtlEntry .1.3.6.1.4.1.6527.3.1.2.11.2.26 |
tmnxOamVccvTrCtlEntryDefines an entry in the tmnxOamVccvTrCtlTable. The first index
element, tmnxOamTrCtlOwnerIndex, is of type SnmpAdminString,
a textual convention that allows for use of the SNMPv3
View-Based Access Control Model (RFC 2575 [11], VACM)
and allows a management application to identify its entries.
The second index, tmnxOamTrCtlTestIndex, enables the same
management application to have multiple outstanding requests. TmnxOamVccvTrCtlEntry .1.3.6.1.4.1.6527.3.1.2.11.2.26.1 |
tmnxOamVccvTrCtlSdpIdVcIdThe value of tmnxOamVccvTrCtlSdpIdVcId specifies the SDP binding of
the FEC 128 pseudowire to be used when performing a vccv-trace
operation. A non-zero value is mandatory when testing a FEC 128
pseudowire.
The all-zeros value indicates an unused SDP binding.
If tmnxOamVccvTrCtlSdpIdVcId is set to a non-default value, then
the following objects must be default: tmnxOamVccvTrCtlSpokeSdpId,
tmnxOamVccvTrCtlSaiiGlobalId, tmnxOamVccvTrCtlSaiiPrefix,
tmnxOamVccvTrCtlSaiiAcId, tmnxOamVccvTrCtlTaiiGlobalId,
tmnxOamVccvTrCtlTaiiPrefix, and tmnxOamVccvTrCtlTaiiAcId.
If the value of tmnxOamVccvTrCtlSdpIdVcId is non-zero and invalid, or
the pseudowire is administratively down, or unavailable, the OAM Trace
request message probe is not sent and an appropriate error value is
written to tmnxOamTrProbeHistoryStatus for that probe entry. Once the
interval timer expires, the next probe attempt will be made if
required.rw SdpBindId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.26.1.1 |
tmnxOamVccvTrCtlReplyModeThe value of tmnxOamVccvTrCtlReplyMode specifies the method of reply
due to the vccv-traceRoute request message.
ip (2) out-of-band reply
controlChannel (4) inband reply
This parameter is optional for vccv-traceRoute.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.11.2.26.1.2 |
tmnxOamVccvTrCtlSpokeSdpIdThe value of tmnxOamVccvTrCtlSpokeSdpId specifies the spoke SDP
identifier to be used when performing a vccv-trace test on a FEC 129
pseudowire. This object is optional.
At most one of tmnxOamVccvTrCtlSdpIdVcId and
tmnxOamVccvTrCtlSpokeSdpId can be set to a non-default value on a
particular row.
A value of zero indicates that no spoke SDP identifier has been
configured.rw TmnxSpokeSdpIdOrZero .1.3.6.1.4.1.6527.3.1.2.11.2.26.1.3 |
tmnxOamVccvTrCtlSaiiGlobalIdThe value of tmnxOamVccvTrCtlSaiiGlobalId specifies the global
identifier of the Source Attachment Individual Identifier (SAII)
to be used when testing a FEC 129 AII Type 2 pseudowire.
tmnxOamVccvTrCtlSaiiGlobalId, tmnxOamVccvTrCtlSaiiPrefix,
tmnxOamVccvTrCtlSaiiAcId, tmnxOamVccvTrCtlTaiiGlobalId,
tmnxOamVccvTrCtlTaiiPrefix, and tmnxOamVccvTrCtlTaiiAcId can be
used (together) to identify a FEC 129 AII Type 2 pseudowire.
At most one of tmnxOamVccvTrCtlSdpIdVcId and
tmnxOamVccvTrCtlSaiiGlobalId can be set to a non-default value on a
particular row.
A value of zero indicates that no global identifier has been
configured.rw TmnxPwGlobalIdOrZero .1.3.6.1.4.1.6527.3.1.2.11.2.26.1.4 |
tmnxOamVccvTrCtlSaiiPrefixThe value of tmnxOamVccvTrCtlSaiiPrefix specifies the prefix of the
Source Attachment Individual Identifier (SAII) to be used when testing
a FEC 129 AII Type 2 pseudowire.
At most one of tmnxOamVccvTrCtlSdpIdVcId and
tmnxOamVccvTrCtlSaiiPrefix can be set to a non-default value on a
particular row.
A value of zero indicates that no prefix has been configured.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.26.1.5 |
tmnxOamVccvTrCtlSaiiAcIdThe value of tmnxOamVccvTrCtlSaiiAcId specifies the attachment
circuit identifier of the Source Attachment Individual Identifier
(SAII) to be used when testing a FEC 129 AII Type 2 pseudowire.
At most one of tmnxOamVccvTrCtlSdpIdVcId and
tmnxOamVccvTrCtlSaiiAcId can be set to a non-default value on a
particular row.
A value of zero indicates that no attachment circuit identifier has
been configured.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.26.1.6 |
tmnxOamVccvTrCtlTaiiGlobalIdThe value of tmnxOamVccvTrCtlTaiiGlobalId specifies the global
identifier of the Target Attachment Individual Identifier (TAII)
to be used when testing a FEC 129 AII Type 2 pseudowire.
At most one of tmnxOamVccvTrCtlSdpIdVcId and
tmnxOamVccvTrCtlTaiiGlobalId can be set to a non-default value on a
particular row.
A value of zero indicates that no global identifier has been
configured.rw TmnxPwGlobalIdOrZero .1.3.6.1.4.1.6527.3.1.2.11.2.26.1.7 |
tmnxOamVccvTrCtlTaiiPrefixThe value of tmnxOamVccvTrCtlTaiiPrefix specifies the prefix of the
Target Attachment Individual Identifier (TAII) to be used when testing
a FEC 129 AII Type 2 pseudowire.
At most one of tmnxOamVccvTrCtlSdpIdVcId and
tmnxOamVccvTrCtlTaiiPrefix can be set to a non-default value on a
particular row.
A value of zero indicates that no prefix has been configured.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.26.1.8 |
tmnxOamVccvTrCtlTaiiAcIdThe value of tmnxOamVccvTrCtlTaiiAcId specifies the attachment
circuit identifier of the Target Attachment Individual Identifier
(TAII) to be used when testing a FEC 129 AII Type 2 pseudowire.
At most one of tmnxOamVccvTrCtlSdpIdVcId and
tmnxOamVccvTrCtlTaiiAcId can be set to a non-default value on a
particular row.
A value of zero indicates that no attachment circuit identifier has
been configured.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.26.1.9 |
tmnxOamVccvTrCtlTestSubModeThe value of tmnxOamVccvTrCtlTestSubMode specifies the type of VCCV
trace route test to perform.
When this object is 'unspecified(1)', the type of VCCV trace route test
to be performed is determined when the test is started, from the set of
tmnxOamVccvTrCtlTable objects configured with non-default values.
If there is a mismatch between tmnxOamVccvTrCtlTestSubMode and the type
of the pseudowire to be tested, the test will fail. For example, if
tmnxOamVccvTrCtlTestSubMode is 'static(2)', and
tmnxOamVccvTrCtlSdpIdVcId refers to an SDP binding with
TIMETRA-SDP-MIB::sdpDelivery not equal to 'mplsTp(3)', the test will
fail.
The supported object combinations for VCCV trace route tests are listed
in the tmnxOamVccvTrCtlTable DESCRIPTION clause.rw TmnxOamVccvTestSubMode .1.3.6.1.4.1.6527.3.1.2.11.2.26.1.10 |
tmnxOamVccvTrCtlAssocChannelThe value of tmnxOamVccvTrCtlAssocChannel specifies the launched echo
request's usage of the Associated Channel (ACH) mechanism, when
performing an MPLS-TP VCCV trace route test.
When tmnxOamVccvTrCtlTestSubMode is 'static(2)', the default value
for tmnxOamVccvTrCtlAssocChannel is 'nonIp(2)'.
The supported object combinations for VCCV trace route tests are listed
in the tmnxOamVccvTrCtlTable DESCRIPTION clause.rw TmnxOamVccvAssocChannel .1.3.6.1.4.1.6527.3.1.2.11.2.26.1.11 |
tmnxOamVccvTrNextPwSegmentTableDefines a table for storing the results of an OAM 'vccvTraceRoute'
probe operation where a Vccv next hop list is returned.
An entry in this table is created when the result of an OAM
'vccvTraceRoute' probe is determined. An entry is removed from this
table when its corresponding tmnxOamTrCtlEntry is deleted. SEQUENCE OF TmnxOamVccvTrNextPwSegmentEntry .1.3.6.1.4.1.6527.3.1.2.11.2.27 |
tmnxOamVccvTrNextPwSegmentEntryDefines an entry in the tmnxOamVccvTrNextPwSegmentTable. The first two
index elements identify the tmnxOamTrCtlEntry that a
tmnxOamVccvTrNextPwSegmentEntry belongs to. The third index element
identifies an OAM trace route test run. The fourth, fifth and sixth
index elements select a single OAM 'vccvTraceRoute' reply. TmnxOamVccvTrNextPwSegmentEntry .1.3.6.1.4.1.6527.3.1.2.11.2.27.1 |
tmnxOamVccvTrNextPwIDThe value of tmnxOamVccvTrNextPwID indicates the next-hop pseudo-wire
in the trace route operation for a specific 'vccvTraceRoute' probe
reply. A value of '0' indicates that there are no further next-hops for
a specific trace route operation.ro TmnxVcIdOrNone (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.27.1.1 |
tmnxOamVccvTrNextPwTypeThe value of tmnxOamVccvTrNextPwType indicates the next-hop pseudo-wire
type in the trace route operation for a specific 'vccvTraceRoute' probe
reply.ro SdpBindVcType (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.27.1.2 |
tmnxOamVccvTrNextSenderAddrTypeThe value of tmnxOamVccvTrNextSenderAddrType indicates the next-hop
sender IP address type in the trace route operation for a specific
'vccvTraceRoute' probe reply.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.27.1.3 |
tmnxOamVccvTrNextSenderAddrThe value of tmnxOamVccvTrNextSenderAddr indicates the next-hop sender
IP address in the trace route oepration for a specific 'vccvTraceRoute'
probe reply.ro InetAddress .1.3.6.1.4.1.6527.3.1.2.11.2.27.1.4 |
tmnxOamVccvTrNextRemoteAddrTypeThe value of tmnxOamVccvTrNextRemoteAddrType indicates the next-hop
remote IP address type in the trace route operation for a specific
'vccvTraceRoute' probe reply.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.27.1.5 |
tmnxOamVccvTrNextRemoteAddrThe value of tmnxOamVccvTrNextRemoteAddr indicates the next-hop
remote IP address in the trace route operation for a specific
'vccvTraceRoute' probe reply.ro InetAddress .1.3.6.1.4.1.6527.3.1.2.11.2.27.1.6 |
tmnxOamVccvTrNextSaiiGlobalIdThe value of tmnxOamVccvTrNextSaiiGlobalId indicates the global
identifier of the Source Attachment Individual Identifier (SAII)
of a specific 'vccvTraceRoute' probe reply.
A non-zero value is returned if a FEC 129 AII Type 2 pseudowire was
probed. Otherwise, zero is returned.ro TmnxPwGlobalIdOrZero .1.3.6.1.4.1.6527.3.1.2.11.2.27.1.7 |
tmnxOamVccvTrNextSaiiPrefixThe value of tmnxOamVccvTrNextSaiiPrefix indicates the prefix of the
Source Attachment Individual Identifier (SAII) of a specific
'vccvTraceRoute' probe reply.
A non-zero value is returned if a FEC 129 AII Type 2 pseudowire was
probed. Otherwise, zero is returned.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.27.1.8 |
tmnxOamVccvTrNextSaiiAcIdThe value of tmnxOamVccvTrNextSaiiAcId indicates the attachment
circuit identifier of the Source Attachment Individual Identifier
(SAII) of a specific 'vccvTraceRoute' probe reply.
A non-zero value is returned if a FEC 129 AII Type 2 pseudowire was
probed. Otherwise, zero is returned.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.27.1.9 |
tmnxOamVccvTrNextTaiiGlobalIdThe value of tmnxOamVccvTrNextTaiiGlobalId indicates the global
identifier of the Target Attachment Individual Identifier (TAII)
of a specific 'vccvTraceRoute' probe reply.
A non-zero value is returned if a FEC 129 AII Type 2 pseudowire was
probed. Otherwise, zero is returned.ro TmnxPwGlobalIdOrZero .1.3.6.1.4.1.6527.3.1.2.11.2.27.1.10 |
tmnxOamVccvTrNextTaiiPrefixThe value of tmnxOamVccvTrNextTaiiPrefix indicates the prefix of the
Target Attachment Individual Identifier (TAII) of a specific
'vccvTraceRoute' probe reply.
A non-zero value is returned if a FEC 129 AII Type 2 pseudowire was
probed. Otherwise, zero is returned.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.27.1.11 |
tmnxOamVccvTrNextTaiiAcIdThe value of tmnxOamVccvTrNextTaiiAcId indicates the attachment
circuit identifier of the Target Attachment Individual Identifier
(TAII) of a specific 'vccvTraceRoute' probe reply.
A non-zero value is returned if a FEC 129 AII Type 2 pseudowire was
probed. Otherwise, zero is returned.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.27.1.12 |
tmnxOamVccvTrNextTpAgiThe value of tmnxOamVccvTrNextTpAgi indicates the Service Identifier
field of the RFC 6426 Static Pseudowire Sub-TLV of the reply PDU.
If a pseudowire other than an MPLS-TP pseudowire was probed, the
all-zeros value is returned.ro OCTET STRING .1.3.6.1.4.1.6527.3.1.2.11.2.27.1.13 |
tmnxOamVccvTrNextTpSaiiGlobalIdThe value of tmnxOamVccvTrNextTpSaiiGlobalId indicates the Source
Global ID field of the RFC 6426 Static Pseudowire Sub-TLV of the reply
PDU.
If a pseudowire other than an MPLS-TP pseudowire was probed, zero is
returned.ro TmnxMplsTpGlobalID .1.3.6.1.4.1.6527.3.1.2.11.2.27.1.14 |
tmnxOamVccvTrNextTpSaiiNodeIdThe value of tmnxOamVccvTrNextTpSaiiNodeId indicates the Source
Node ID field of the RFC 6426 Static Pseudowire Sub-TLV of the reply
PDU.
If a pseudowire other than an MPLS-TP pseudowire was probed, zero is
returned.ro TmnxMplsTpNodeID .1.3.6.1.4.1.6527.3.1.2.11.2.27.1.15 |
tmnxOamVccvTrNextTpSaiiAcIdThe value of tmnxOamVccvTrNextTpSaiiAcId indicates the Source
Attachment Circuit ID field of the RFC 6426 Static Pseudowire Sub-TLV
of the reply PDU.
If a pseudowire other than an MPLS-TP pseudowire was probed, zero is
returned.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.27.1.16 |
tmnxOamVccvTrNextTpTaiiGlobalIdThe value of tmnxOamVccvTrNextTpTaiiGlobalId indicates the Destination
Global ID field of the RFC 6426 Static Pseudowire Sub-TLV of the reply
PDU.
If a pseudowire other than an MPLS-TP pseudowire was probed, zero is
returned.ro TmnxMplsTpGlobalID .1.3.6.1.4.1.6527.3.1.2.11.2.27.1.17 |
tmnxOamVccvTrNextTpTaiiNodeIdThe value of tmnxOamVccvTrNextTpTaiiNodeId indicates the Destination
Node ID field of the RFC 6426 Static Pseudowire Sub-TLV of the reply
PDU.
If a pseudowire other than an MPLS-TP pseudowire was probed, zero is
returned.ro TmnxMplsTpNodeID .1.3.6.1.4.1.6527.3.1.2.11.2.27.1.18 |
tmnxOamVccvTrNextTpTaiiAcIdThe value of tmnxOamVccvTrNextTpTaiiAcId indicates the Destination
Attachment Circuit ID field of the RFC 6426 Static Pseudowire Sub-TLV
of the reply PDU.
If a pseudowire other than an MPLS-TP pseudowire was probed, zero is
returned.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.27.1.19 |
tmnxOamP2mpLspTrCtlTableDefines the Alcatel-Lucent SROS OAM P2MP LSP Trace Control Table
for providing, via SNMP, the capability of performing Alcatel-Lucent
SROS OAM 'p2mpLspTrace' test operations for a single leaf
egress node of an P2MP LSP. The results of these tests are
stored in the tmnxOamTrResultsTable and the
tmnxOamTrProbeHistoryTable. SEQUENCE OF TmnxOamP2mpLspTrCtlEntry .1.3.6.1.4.1.6527.3.1.2.11.2.28 |
tmnxOamP2mpLspTrCtlEntryDefines an entry in the tmnxOamP2mpLspTrCtlTable. The first index
element, tmnxOamTrCtlOwnerIndex, is of type SnmpAdminString,
a textual convention that allows for use of the SNMPv3
View-Based Access Control Model (RFC 2575 [11], VACM)
and allows a management application to identify its entries.
The second index, tmnxOamTrCtlTestIndex, enables the same
management application to have multiple outstanding requests. TmnxOamP2mpLspTrCtlEntry .1.3.6.1.4.1.6527.3.1.2.11.2.28.1 |
tmnxOamP2mpLspTrCtlLspNameAdministrative name of the target P2MP Labeled Switch Path (LSP)
for this OAM P2MP LSP Trace test. This parameter is mandatory.rw TLNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.28.1.1 |
tmnxOamP2mpLspTrCtlInstNameThis parameter identifies an instance of a P2MP LSP, either a primary
or secondary instance of a P2MP LSP Tree.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.28.1.2 |
tmnxOamP2mpLspTrCtlLeafIpAddrThe value of tmnxOamP2mpLspTrCtlLeafIpAddr specifies the Internet
address of the egress leaf node of a P2MP LSP Tree.
This parameter is mandatory.rw InetAddress .1.3.6.1.4.1.6527.3.1.2.11.2.28.1.3 |
tmnxOamP2mpLspTrCtlLeafIpAddrTypeThe value of tmnxOamP2mpLspTrCtlLeafIpAddrType specifies the type
of Internet address stored in tmnxOamP2mpLspTrCtlLeafIpAddr.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.28.1.4 |
tmnxOamP2mpLspTrMapTableDefines a table for storing the results of an OAM 'p2mpLspTrace'
probe operation when a Downstream Mapping TLV was returned. Each row
represents a single label map within the returned downstream mapping
TLV.
An entry in this table is created when the result of an OAM
'p2mpLspTrace' probe is determined.
An entry is removed from this table when its corresponding
tmnxOamTrCtlEntry is deleted. SEQUENCE OF TmnxOamP2mpLspTrMapEntry .1.3.6.1.4.1.6527.3.1.2.11.2.29 |
tmnxOamP2mpLspTrMapEntryDefines an entry in the tmnxOamP2mpLspTrMapTable. The first two
index elements identify the tmnxOamTrCtlEntry that a
tmnxOamP2mpLspTrMapEntry belongs to. The third index element
identifies an OAM trace route test run. The fourth index element
selects the group of responses associated with a specific
probe attempt. The fifth and sixth indexes select the hop and
the probe at that hop for a particular Alcatel-Lucent SROS OAM
Trace Route operation. The seventh index selects a single downstream
L2 map entry within the specific probe reply. TmnxOamP2mpLspTrMapEntry .1.3.6.1.4.1.6527.3.1.2.11.2.29.1 |
tmnxOamP2mpLspTrMapIndexThe value of tmnxOamP2mpLspTrMapIndex specifies a single L2 mapping
entry within a specific 'p2mpLspTrace' probe reply.
The agent starts assigning tmnxOamP2mpLspTrMapIndex values at 1. Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.29.1.1 |
tmnxOamP2mpLspTrMapDSIPv4AddrThe value of tmnxOamP2mpLspTrMapDSIPv4Addr indicates the IPv4 address
of the downstream LSR that this entry in the tmnxOamP2mpLspTrMapTable
describes. If the interface to the downstream LSR is numbered,
then the tmnxOamP2mpLspTrMapDSIPv4Addr can either be the downstream
LSR's Router ID or the interface address of the downstream LSR.
If the interface to the downstream LSR is unnumbered, the value
of tmnxOamP2mpLspTrMapDSIPv4Addr indicates the downstream LSR's Router
ID.ro IpAddress .1.3.6.1.4.1.6527.3.1.2.11.2.29.1.2 |
tmnxOamP2mpLspTrMapAddrTypeThe value of tmnxOamP2mpLspTrMapAddrType indicates the type of
downstream interface address specified by tmnxOamP2mpLspTrMapDSIfAddr.
The only valid values for tmnxOamP2mpLspTrMapAddrType are
'ipv4Address', 'ipv4Unnumbered', 'ipv6Address' and 'ipv6Unnumbered'.ro TmnxOamAddressType .1.3.6.1.4.1.6527.3.1.2.11.2.29.1.3 |
tmnxOamP2mpLspTrMapDSIfAddrWhen tmnxOamP2mpLspTrMapAddrType has a value of 'ipv4Address'
tmnxOamP2mpLspTrMapDSIfAddr indicates the downstream LSR's
interface address. When tmnxOamP2mpLspTrMapAddrType has a value
of 'unnumbered', tmnxOamP2mpLspTrMapDSIfAddr indicates the index
assigned by the upstream LSR to the interface.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.29.1.4 |
tmnxOamP2mpLspTrMapMTUThe value of tmnxOamP2mpLspTrMapMTU indicates the largest MPLS frame
(including the label stack) that fits on the interface to the
downstream LSR.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.29.1.5 |
tmnxOamP2mpLspTrMapP2mpBranchWhen the value of tmnxOamP2mpLspTrMapP2mpBranch is 'true', the
'p2mpLspTrace' response indicates that the responding router
is a branch node of the P2MP LSP tree.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.2.29.1.6 |
tmnxOamP2mpLspTrMapP2mpBudWhen the value of tmnxOamP2mpLspTrMapP2mpBud is 'true', the
'p2mpLspTrace' response indicates that the responding router
is a bud node of the P2MP LSP tree.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.2.29.1.7 |
tmnxOamP2mpLspTrDSLabelTableDefines a table for storing the results of an OAM 'p2mpLspTrace'
probe operation when a Downstream Mapping TLV was
returned. Each row represents a single downstream label within a
returned downstream L2 mapping TLV.
An entry in this table is created when the result of an OAM
'p2mpLspTrace' probe is determined.
An entry is removed from this table when its corresponding
tmnxOamTrCtlEntry is deleted. SEQUENCE OF TmnxOamP2mpLspTrDSLabelEntry .1.3.6.1.4.1.6527.3.1.2.11.2.30 |
tmnxOamP2mpLspTrDSLabelEntryDefines an entry in the tmnxOamP2mpLspTrDSLabelTable. The first
two index elements identify the tmnxOamTrCtlEntry that a
tmnxOamLspTrMapEntry belongs to. The third index element
identifies a OAM trace route test run. The fourth index element
selects the group of responses associated with a specific
probe attempt. The fifth and sixth indexes select the hop and
the probe at that hop for a particular Alcatel-Lucent SROS OAM
Trace Route operation. The seventh index selects a single downstream
L2 map entry within the specific probe reply. The eigth index
selects seccessive downstream L2 label entries contained in a
specific probe reply. TmnxOamP2mpLspTrDSLabelEntry .1.3.6.1.4.1.6527.3.1.2.11.2.30.1 |
tmnxOamP2mpLspTrDSLabelIndexThe tmnxOamP2mpLspTrDSLabelIndex selects a single downstream L2 label
entry within a specific L2 mapping entry reply.
The agent starts assigning tmnxOamP2mpLspTrDSLabelIndex values at 1. Unsigned32 (1..'ffffffff'h) SYNTAX Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.30.1.1 |
tmnxOamP2mpLspTrDSLabelLabelThe value of tmnxOamP2mpLspTrDSLabelLabel is the label used by the
downstream router specified by this downstream L2 label entry.ro MplsLabel (MPLS-LDP-MIB) .1.3.6.1.4.1.6527.3.1.2.11.2.30.1.2 |
tmnxOamP2mpLspTrDSLabelProtocolThe value of tmnxOamP2mpLspTrDSLabelProtocol is the signaling protocol
used by the router for the label specified by this downstream
L2 label entry.ro TmnxOamSignalProtocol .1.3.6.1.4.1.6527.3.1.2.11.2.30.1.3 |
tmnxOamEthCfmTrCtlTabletmnxOamEthCfmTrCtlTable contains Ethernet CFM-specific configuration
information for 'ethCfmLinkTrace' tests.
This table extends the tmnxOamTrCtlTable. A row is automatically
created in this table when a row in tmnxOamTrCtlTable has
tmnxOamTrCtlTestMode set to 'ethCfmLinkTrace'. Deleting a row in
tmnxOamTrCtlTable automatically deletes the row (if any) with the same
index values in tmnxOamEthCfmTrCtlTable.
Test results are stored in tmnxOamTrResultsTable,
tmnxOamTrProbeHistoryTable, tmnxOamTrHopsTable, and
tmnxOamEthCfmTrPrHistTable. SEQUENCE OF TmnxOamEthCfmTrCtlEntry .1.3.6.1.4.1.6527.3.1.2.11.2.31 |
tmnxOamEthCfmTrCtlEntrytmnxOamEthCfmTrCtlEntry defines an entry in the
tmnxOamEthCfmTrCtlTable. Each index is an object in
tmnxOamTrCtlTable. TmnxOamEthCfmTrCtlEntry .1.3.6.1.4.1.6527.3.1.2.11.2.31.1 |
tmnxOamEthCfmTrCtlTgtMacAddrThe value of tmnxOamEthCfmTrCtlTgtMacAddr specifies the target MAC
address for the test.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.2.31.1.1 |
tmnxOamEthCfmTrCtlSrcMdIndexThe value of tmnxOamEthCfmTrCtlSrcMdIndex specifies the source CFM
maintenance domain index for the test. Zero is the null CFM
maintenance domain index.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.31.1.2 |
tmnxOamEthCfmTrCtlSrcMaIndexThe value of tmnxOamEthCfmTrCtlSrcMaIndex specifies the source CFM
maintenance association index for the test. Zero is the null CFM
maintenance association index.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.2.31.1.3 |
tmnxOamEthCfmTrCtlSrcMepIdThe value of tmnxOamEthCfmTrCtlSrcMepId specifies the source
Maintenance association End Point Identifier (MEP ID) for the test.
Zero is the null MEP ID.rw Dot1agCfmMepIdOrZero .1.3.6.1.4.1.6527.3.1.2.11.2.31.1.4 |
tmnxOamEthCfmTrPrHistTabletmnxOamEthCfmTrPrHistTable contains Ethernet CFM-specific probe
history for 'ethCfmLinkTrace' tests.
This table extends the tmnxOamTrProbeHistoryTable. A row is
automatically created in this table when a row is created in
tmnxOamTrProbeHistoryTable for a test with tmnxOamTrCtlTestMode set to
'ethCfmLinkTrace'. Deleting a row in tmnxOamTrProbeHistoryTable
automatically deletes the row (if any) with the same index values in
tmnxOamEthCfmTrPrHistTable. SEQUENCE OF TmnxOamEthCfmTrPrHistEntry .1.3.6.1.4.1.6527.3.1.2.11.2.32 |
tmnxOamEthCfmTrPrHistEntryDefines an entry in the tmnxOamEthCfmTrPrHistTable. The indices are
the same as the tmnxOamTrProbeHistoryTable indices. TmnxOamEthCfmTrPrHistEntry .1.3.6.1.4.1.6527.3.1.2.11.2.32.1 |
tmnxOamEthCfmTrPrHistIngressMacThe value of tmnxOamEthCfmTrPrHistIngressMac indicates the ingress MAC
address of the probe.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.2.32.1.1 |
tmnxOamEthCfmTrPrHistEgressMacThe value of tmnxOamEthCfmTrPrHistEgressMac indicates the egress MAC
address of the probe.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.2.32.1.2 |
tmnxOamEthCfmTrPrHistRelayActionThe value of tmnxOamEthCfmTrPrHistRelayAction indicates the value of
the Relay Action field in the Link Trace Reply. 'unknown(0)' is
returned when a Link Trace Reply has not arrived, or the Relay Action
field in the Link Trace Reply is outside the expected range.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.11.2.32.1.3 |
tmnxOamEthCfmTrPrHistForwardedThe value of tmnxOamEthCfmTrPrHistForwarded indicates if a Link Trace
Message was forwarded by the responding Maintenance Point (MP), as
returned in the 'FwdYes' flag of the Flags field of the Link Trace
Reply.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.2.32.1.4 |
tmnxOamEthCfmTrPrHistTerminalMepThe value of tmnxOamEthCfmTrPrHistTerminalMep indicates whether the
forwarded Link Trace Message reached a MEP enclosing its MA, as
returned in the Terminal MEP flag of the Flags field of the Link Trace
Reply.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.2.32.1.5 |
tmnxOamSaaObjs OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.11.3 |
tmnxOamSaaNotifyObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.11.3.1 |
tmnxOamSaaCtlTableDefines the Alcatel-Lucent SROS OAM SAA Control Table for providing,
via SNMP, the capability of performing Alcatel-Lucent SROS OAM SAA test
operations. The results of these tests are stored in the
ping or trace route results tables. SEQUENCE OF TmnxOamSaaCtlEntry .1.3.6.1.4.1.6527.3.1.2.11.3.2 |
tmnxOamSaaCtlEntryDefines an entry in the tmnxOamSaaCtlTable. The first index
element, tmnxOamSaaCtlOwnerIndex, is of type SnmpAdminString,
a textual convention that allows for use of the SNMPv3
View-Based Access Control Model (RFC 2575 [11], VACM)
and allows a management application to identify its entries.
The second index, tmnxOamSaaCtlTestIndex, enables the same
management application to have multiple outstanding requests. TmnxOamSaaCtlEntry .1.3.6.1.4.1.6527.3.1.2.11.3.2.1 |
tmnxOamSaaCtlOwnerIndexTo facilitate the provisioning of access control by a
security administrator using the View-Based Access
Control Model (RFC 2575, VACM) for tables in which
multiple users may need to independently create or
modify entries, the initial index is used as an 'owner
index'. Such an initial index has a syntax of
SnmpAdminString, and can thus be trivially mapped to a
security name or group name as defined in VACM, in
accordance with a security policy.
When used in conjunction with such a security policy all
entries in the table belonging to a particular user (or
group) will have the same value for this initial index.
For a given user's entries in a particular table, the
object identifiers for the information in these entries
will have the same subidentifiers (except for the 'column'
subidentifier) up to the end of the encoded owner index.
To configure VACM to permit access to this portion of the
table, one would create vacmViewTreeFamilyTable entries
with the value of vacmViewTreeFamilySubtree including
the owner index portion, and vacmViewTreeFamilyMask
'wildcarding' the column subidentifier. More elaborate
configurations are possible. SnmpAdminString .1.3.6.1.4.1.6527.3.1.2.11.3.2.1.1 |
tmnxOamSaaCtlTestIndexThe test name index of the Alcatel-Lucent SROS OAM Service Assurance
Agent, SAA, test. This is locally unique, within the scope of an
tmnxOamSaaCtlOwnerIndex. SnmpAdminString .1.3.6.1.4.1.6527.3.1.2.11.3.2.1.2 |
tmnxOamSaaCtlRowStatusThis object allows entries to be created and deleted
in the tmnxOamSaaCtlTable. Deletion of an entry in this
table results in all corresponding control and results entries
in either the ping or traceroute tables.
Activation of a Alcatel-Lucent SROS OAM ping or trace route operation
is controlled via tmnxOamPingCtlAdminStatus or
tmnxOamTrCtlAdminStatus and not by changing this object's value
to 'active (1)'.
An attempt to delete an entry in this table by setting this object's
value to 'destroy (6)' will fail with an inconsistentValue error
if the associated ping or traceroute test is in progress.
An attempt to delete an entry in this table by setting this object's
value to 'destroy (6)' will fail with an inconsistentValue error
if the value of tmnxOamSaaCtlAdminStatus is not 'outOfService'.
The operational state of an Alcatel-Lucent SROS OAM SAA test operation
can be determined by examination of its associated
tmnxOamPingResultsOperStatus or tmnxOamTrResultsOperStatus object.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.3.2.1.3 |
tmnxOamSaaCtlStorageTypeThe storage type for this conceptual row.
Conceptual rows having the value 'permanent' need not
allow write-access to any columnar objects in the row.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.3.2.1.4 |
tmnxOamSaaCtlLastChangedThe value of tmnxOamSaaCtlLastChanged indicates the time the
value of a settable object in this row was last changed.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.3.2.1.5 |
tmnxOamSaaCtlAdminStatusThe value of tmnxOamSaaCtlAdminStatus indicates the desired
administrative state of the Service Assurance Agent, SAA,
test.
When the value of tmnxOamSaaCtlAdminStatus is 'outOfService',
an attempt to start this SAA test by setting its associated
tmnxOamPingCtlAdminStatus or tmnxOamTrCtlAdminStatus to
'enabled (1)' will fail with an inconsistentValue error.
When the value of tmnxOamSaaCtlAdminStatus is 'inService' attempts
to modify any other object in the associated tmnxOamPingCtlTable,
tmnxOamTrCtlTable or the control table for the specific OAM test
type will fail with an inconsistentValue error.rw TmnxAdminState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.11.3.2.1.6 |
tmnxOamSaaCtlDescrThe value of tmnxOamSaaCtlDescr specifies a user provided description
string for this SAA test. It can consist of any printable,
seven-bit ASCII characters up to 80 characters in length.rw TItemDescription (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.11.3.2.1.7 |
tmnxOamSaaCtlTestModeThe value of tmnxOamSaaCtlTestMode indicates the type of Service
Assurance Agent (SAA) test to be performed.
When the value of this object is 'notConfigured(0)', no associated row
exists in either the tmnxOamPingCtlTable or tmnxOamTrCtlTable.
When the value of this object is 'ping(1)', an associated row exists in
the tmnxOamPingCtlTable.
When the value of this object is 'traceroute(2)', an associated row
exists in the tmnxOamTrCtlTable.ro TmnxOamTestMode .1.3.6.1.4.1.6527.3.1.2.11.3.2.1.8 |
tmnxOamSaaCtlRunsThe value of tmnxOamSaaCtlRuns indicates the number of times
this OAM SAA test has been executed.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.11.3.2.1.9 |
tmnxOamSaaCtlFailuresThe value of tmnxOamSaaCtlFailures indicates the number of times
this OAM SAA test has failed.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.11.3.2.1.10 |
tmnxOamSaaCtlLastRunResultThe value of tmnxOamSaaCtlLastRunResult indicates the completion
status the last time this test was executed. If this OAM test is
currently in progress, this object indicates the result of the
previous test run, if any.ro TmnxOamTestResult .1.3.6.1.4.1.6527.3.1.2.11.3.2.1.11 |
tmnxOamSaaCtlAcctPolicyIdThe value of tmnxOamSaaCtlAcctPolicyId specifies the accounting
policy used to record the information obtained from the results
tables. A value of zero (0) specifies no accounting policy.rw Integer32 (0|1..99) .1.3.6.1.4.1.6527.3.1.2.11.3.2.1.12 |
tmnxOamSaaCtlSuppressAccountingThe value of tmnxOamSaaCtlSuppressAccounting specifies whether or
not the updating of accounting files is suppressed. The value of
'true (1)' is applicable only when an accounting policy has been
specified by tmnxOamSaaCtlAcctPolicyId.
Upon completion of a test, this object is reset to its default value.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.3.2.1.13 |
tmnxOamSaaCtlContinuousThe value of tmnxOamSaaCtlContinuous specifies whether or not
the OAM SAA test is to be executed indefinitely.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.3.2.1.14 |
tmnxOamSaaCtlKeepProbeHistoryAdmThe value of tmnxOamSaaCtlKeepProbeHistoryAdm specifies whether or not
per-probe history table rows will be created for this test. A test
without per-probe history table rows consumes less CPM RAM.
tmnxOamSaaCtlKeepProbeHistoryOpr is a read-only operational value
derived from tmnxOamSaaCtlKeepProbeHistoryAdm. The bulk of the
tmnxOamSaaCtlKeepProbeHistoryAdm semantics are described in the
tmnxOamSaaCtlKeepProbeHistoryOpr DESCRIPTION clause.
An attempt to set tmnxOamSaaCtlKeepProbeHistoryAdm to 'drop(2)' when
tmnxOamSaaCtlTestMode is not 'ping(1)' returns an 'inconsistentValue'
error to the manager.
When the SAA test's test mode is deconfigured (i.e.
tmnxOamSaaCtlTestMode becomes 'notConfigured(0)'),
tmnxOamSaaCtlKeepProbeHistoryAdm returns to its default value.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.11.3.2.1.15 |
tmnxOamSaaCtlKeepProbeHistoryOprThe value of tmnxOamSaaCtlKeepProbeHistoryOpr indicates whether or not
per-probe history table rows will be created for this test. A test
without per-probe history table rows consumes less CPM RAM.
The value of tmnxOamSaaCtlKeepProbeHistoryOpr is derived from the value
of`tmnxOamSaaCtlKeepProbeHistoryAdm, as shown in the following table.
tmnxOamSaaCtlKeepProbeHistoryAdm tmnxOamSaaCtlKeepProbeHistoryOpr
'keep(1)' 'keep(1)'
'drop(2)' 'drop(2)'
'auto(3)' 'keep(1)' or 'drop(2)', chosen by SROS
The history table rows created for the combinations of
tmnxOamSaaCtlKeepProbeHistoryOpr and tmnxOamSaaCtlTestMode values
are shown in the following table.
Configuration Options History Table Rows Created
'keep(1)', 'ping(1)' tmnxOamPingHistoryTable or
tmnxOamMacPingHistoryTable
'keep(1)', 'traceroute(2)' tmnxOamTrProbeHistoryTable
'drop(2)', 'ping(1)' none
'drop(2)', 'traceroute(2)' unsupported combination.
If tmnxOamSaaCtlTestMode is 'notConfigured(0)', the value of
tmnxOamSaaCtlKeepProbeHistoryOpr is insignificant, since a test without
a test mode cannot be started. When a Get is performed on
tmnxOamSaaCtlKeepProbeHistoryOpr in this case, 'keep(1)' is returned.
If tmnxOamSaaCtlKeepProbeHistoryAdm is 'auto(3)':
1. tmnxOamSaaCtlKeepProbeHistoryOpr is 'drop(2)' if
a) the test's probe count is greater than 100, OR
b) the test's interval is less than one second, OR
c) tmnxOamSaaCtlTestMode is 'ping(1)' AND the test is continuous
(i.e. tmnxOamSaaCtlContinuous is 'true') AND an accounting
policy is specified (i.e. tmnxOamSaaCtlAcctPolicyId is non-
zero).
2. Otherwise, tmnxOamSaaCtlKeepProbeHistoryOpr is 'keep(1)'.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.11.3.2.1.16 |
tmnxOamSaaThresholdTabletmnxOamSaaThresholdTable contains notification threshold information
for SAA tests. SEQUENCE OF TmnxOamSaaThresholdEntry .1.3.6.1.4.1.6527.3.1.2.11.3.3 |
tmnxOamSaaThresholdEntryDefines an entry in the tmnxOamSaaThresholdTable. The first index
element, tmnxOamSaaCtlOwnerIndex, is of type SnmpAdminString,
a textual convention that allows for use of the SNMPv3
View-Based Access Control Model (RFC 2575 [11], VACM)
and allows a management application to identify its entries.
The second index, tmnxOamSaaCtlTestIndex, enables the same
management application to have multiple outstanding requests.
The third index element identifies the type of statistic to be
monitored for threshold crossing. The fourth index element
identifies which direction, rising or falling, to monitor. TmnxOamSaaThresholdEntry .1.3.6.1.4.1.6527.3.1.2.11.3.3.1 |
tmnxOamSaaTTypeThe value of tmnxOamSaaTType specifies the type of monitored statistic
used to determine if a tmnxOamSaaThreshold notification is generated at
the completion of an SAA test run. TmnxOamSaaThreshold .1.3.6.1.4.1.6527.3.1.2.11.3.3.1.1 |
tmnxOamSaaTDirectionThe value of tmnxOamSaaTDirection specifies whether to
monitor this threshold for crossing in the rising or falling
direction. Enumeration .1.3.6.1.4.1.6527.3.1.2.11.3.3.1.2 |
tmnxOamSaaTRowStatusThe value of tmnxOamSaaTRowStatus controls creation and deletion
of row entries in the tmnxOamSaaThresholdTable.
When a row in this table is created, tmnxOamSaaTThreshold must
also be set or the row creation will fail with an inconsistentValue
error.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.3.3.1.3 |
tmnxOamSaaTLastChangedThe value of tmnxOamSaaTLastChanged indicates the last
time the value of tmnxOamSaaTThreshold was modified.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.3.3.1.4 |
tmnxOamSaaTThresholdThe value of tmnxOamSaaTThreshold specifies the threshold
value to monitor to determine when to generate a tmnxOamSaaThreshold
notification.
A threshold value must be set when the row entry is created.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.3.3.1.5 |
tmnxOamSaaTValueThe value of tmnxOamSaaTValue indicates the value of the
statistic that last caused a tmnxOamSaaThreshold notification
to be generated.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.11.3.3.1.6 |
tmnxOamSaaTLastSentThe value of tmnxOamSaaTLastSent indicates the last time
a tmnxOamSaaThreshold notification was generated as a result
of crossing the threshold specified by the value of
tmnxOamSaaTThreshold.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.3.3.1.7 |
tmnxOamSaaTTestModeThe value of tmnxOamSaaTTestMode indicates the type of
Service Assurance Agent, SAA, test for which a tmnxOamSaaThreshold
notification was generated as a result of crossing the threshold
specified by the value of tmnxOamSaaTThreshold.
When the value of this object is 'notConfigured', no associated
entry exists in either the tmnxOamPingCtlTable or tmnxOamTrCtlTable.
When the value of this object is 'ping', an associated test entry
is configured in the tmnxOamPingCtlTable.
When the value of this object is 'traceroute', an associated test
entry is configured in the tmnxOamTrCtlTable.ro TmnxOamTestMode .1.3.6.1.4.1.6527.3.1.2.11.3.3.1.8 |
tmnxOamSaaTTestRunIndexThe value of tmnxOamSaaTTestRunIndex indicates the test run index
of the Service Assurance Agent, SAA, test for which the last
tmnxOamSaaThreshold notification was generated as a result of
crossing the threshold specified by the value of tmnxOamSaaTThreshold.
When the value of tmnxOamSaaTTestMode is 'ping', the value of
this object is the value of the tmnxOamPingResultsTestRunIndex
that identifies entries for the ping test results of the test run
that generated the last tmnxOamSaaThreshold notification.
When the value of tmnxOamSaaTTestMode is 'traceroute', the value of
this object is the value of the tmnxOamTrResultsTestRunIndex
that identifies entries for the traceroute test results of the
test run that generated the last tmnxOamSaaThreshold notification.
When the value of tmnxOamSaaTTestMode is 'notConfigured', the value of
this object is zero.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.11.3.3.1.9 |
tmnxOamMobGatewayObjs OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.11.4 |
tmnxOamMobGtpPingCtlTableDefines the Alcatel 7x50 SR OAM VPRN Ping Control Table for providing,
via SNMP, the capability of performing Alcatel 7x50 SR OAM 'mobGtpPing'
test operations.
The results of these tests are stored in the tmnxOamPingResultsTable
and the tmnxOamTrProbeHistoryTable. There will be no entries for
these test in the tmnxOamPingHistoryTable. SEQUENCE OF TmnxOamMobGtpPingCtlEntry .1.3.6.1.4.1.6527.3.1.2.11.4.1 |
tmnxOamMobGtpPingCtlEntryDefines an entry in the tmnxOamMobGtpPingCtlTable. The first index
element, tmnxOamPingCtlOwnerIndex, is of type SnmpAdminString,
a textual convention that allows for use of the SNMPv3
View-Based Access Control Model (RFC 2575 [11], VACM)
and allows a management application to identify its entries.
The second index, tmnxOamPingCtlTestIndex, enables the same
management application to have multiple outstanding requests. TmnxOamMobGtpPingCtlEntry .1.3.6.1.4.1.6527.3.1.2.11.4.1.1 |
tmnxOamMobGtpPingRefPointTypeThe value of tmnxOamMobGtpPingRefPointType specifies the reference
point type.
This object is required.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.11.4.1.1.1 |
tmnxOamMobGtpPingVRtrIdThe value of tmnxOamMobGtpPingVRtrId specifies the virtual router.
This object is required.rw TmnxVRtrID (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.11.4.1.1.2 |
tmnxOamMobGtpPingPortThe value of tmnxOamMobGtpPingPort specifies the port number of the
destination.
This object is required.rw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.11.4.1.1.3 |
tmnxOamMobGtpPingGatewayThe value of tmnxOamMobGtpPingGateway specifies the mobile gateway id.
This object is required.rw TmnxMobGwId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.11.4.1.1.4 |
tmnxOamGeneralObjs OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.11.5 |
tmnxOamMplsPduTimeStampFormatThe value of tmnxOamMplsPduTimeStampFormat specifies, on a system-wide
basis:
a) the format of the time stamp to be written into an RFC 4379 MPLS
Echo Request PDU, when initiating a ping or trace route test,
and
b) the format of the time stamp to be written into an RFC 4379 MPLS
Echo Reply PDU, when replying to an incoming MPLS Echo Request PDU,
and
c) the format to use when decoding the time stamps in an incoming MPLS
Echo Request or MPLS Echo Reply PDU.
'rfc4379(0)' specifies the RFC 4379 time stamp format. The time
stamp's 'seconds' field holds the integral number of seconds since
1-Jan-1900 00:00:00 UTC. The time stamp's 'microseconds' field
contains a microseconds value in the range 0..999999. This setting is
used to interoperate with network elements which are fully compliant
with RFC 4379 (e.g. an SROS system with the same setting, or any other
RFC 4379 compliant router).
'unix(1)' specifies the Unix time stamp format. The time stamp's
'seconds' field holds a 'Unix time', i.e. the integral number of
seconds since 1-Jan-1970 00:00:00 UTC. The time stamp's 'microseconds'
field contains a microseconds value in the range 0..999999. This
setting is used to interoperate with network elements which send and
expect a 1970-based timestamp in MPLS Echo Request/Reply PDUs (e.g. an
SROS system with the same setting, or an SROS system running software
earlier than R8.0 R4).
Prior to SROS Release 8.0 R4, this object was not supported. The Unix
time stamp format was always used.
This object is applicable for the ldpTreeTrace, lspPing, lspTraceRoute,
p2mpLspPing, p2mpLspTrace, vccvPing, and vccvTraceRoute test modes
only.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.11.5.1 |
tmnxOamGeneralStats OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.11.5.2 |
tmnxOamSysPerfOprLimitTxThe value of tmnxOamSysPerfOprLimitTx indicates this node's upper bound
on the total echo request packet transmission rate. Echo reply packets
are not affected by this limit.
The upper bound applies to echo request packets sent by the following
test types:
1. SDP keep-alive.
2. Static route CPE check.
3. Filter redirect policy ping test.
4. VRRP policy host unreachable ping test.
5. Any OAM or SAA test configured using TIMETRA-OAM-TEST-MIB.ro Gauge32 UNITS "echo request packets per second" .1.3.6.1.4.1.6527.3.1.2.11.5.2.1 |
tmnxOamSysPerfCfgLimitTxThe value of tmnxOamSysPerfCfgLimitTx indicates this node's upper bound
on the total configured echo request packet transmission rate for a set
of test types. The upper bound is enforced to avoid echo request
packet transmit overload, i.e. to ensure each enabled test can transmit
echo request packets at the test's configured rate. Echo reply packets
are not affected by this limit.
The upper bound applies to echo request packets sent by the following
'always on' test types:
1. SDP keep-alive.
2. Static route CPE check.
3. Filter redirect policy ping test.
4. VRRP policy host unreachable ping test.
5. SAA continuous test (see tmnxOamSaaCtlContinuous).
For example, suppose:
a) tmnxOamSysPerfCfgLimitTx has the value 4000 echo request packets per
second, and
b) several SDP keep-alive sessions are enabled, totalling 1000 echo
request packets per second, and
c) several SAA continuous tests are enabled, totalling 3000 echo
request packets per second.
Then, an attempt to enable an additional SAA continuous test would be
rejected with a 'resourceUnavailable(13)' error.ro Gauge32 UNITS "echo request packets per second" .1.3.6.1.4.1.6527.3.1.2.11.5.2.2 |
tmnxOamSysPerfCfgTotalTxThe value of tmnxOamSysPerfCfgTotalTx indicates this node's current
total configured echo request packet transmission rate, for the set of
tests listed in the tmnxOamSysPerfCfgLimitTx DESCRIPTION clause.
For example, suppose:
a) several SDP keep-alive sessions are enabled, totalling 1000 echo
request packets per second, and
b) several SAA continuous tests are enabled, totalling 2000 echo
request packets per second, and
c) no other relevant tests are enabled.
Then, tmnxOamSysPerfCfgTotalTx will have the value 3000.
The value of tmnxOamSysPerfCfgTotalTx will not exceed the value of
tmnxOamSysPerfCfgLimitTx.ro Gauge32 UNITS "echo request packets per second" .1.3.6.1.4.1.6527.3.1.2.11.5.2.3 |
tmnxOamSysPerfLastClearedTimeThe value of tmnxOamSysPerfLastClearedTime indicates the sysUpTime when
the following statistics were cleared: tmnxOamSysPerfLocalTestTx,
tmnxOamSysPerfRemoteTestRx, and tmnxOamSysPerfReqTypeTable. If the
statistics have not been cleared since the last CPM restart, zero is
returned.
A packet count which is time stamped by this object can be converted to
an average packets per second value using, for example,
pps = tmnxOamSysPerfLocalTestTx /
[(sysUpTime - tmnxOamSysPerfLastClearedTime)/100].ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.11.5.2.4 |
tmnxOamSysPerfLocalTestTxThe value of tmnxOamSysPerfLocalTestTx indicates this node's total
number of echo request packets transmitted by locally initiated tests
(since the last clear). The test types are listed in the
tmnxOamSysPerfOprLimitTx DESCRIPTION clause.ro Counter32 UNITS "echo request packets" .1.3.6.1.4.1.6527.3.1.2.11.5.2.5 |
tmnxOamSysPerfRemoteTestRxThe value of tmnxOamSysPerfRemoteTestRx indicates this node's total
number of echo request packets received from remotely initiated tests
(since the last clear).ro Counter32 UNITS "echo request packets" .1.3.6.1.4.1.6527.3.1.2.11.5.2.6 |
tmnxOamSysPerfReqTypeTabletmnxOamSysPerfReqTypeTable has a row for each relevant OAM echo request
packet type. Each row contains packet counters. SEQUENCE OF TmnxOamSysPerfReqTypeEntry .1.3.6.1.4.1.6527.3.1.2.11.5.2.7 |
tmnxOamSysPerfReqTypeEntryRows in tmnxOamSysPerfReqTypeTable are system-generated at CPM restart.
Rows cannot be created or destroyed using SNMP. TmnxOamSysPerfReqTypeEntry .1.3.6.1.4.1.6527.3.1.2.11.5.2.7.1 |
tmnxOamSysPerfReqTypeNameThe value of tmnxOamSysPerfReqTypeName specifies the name of an echo
request packet type (e.g. 'ICMP'). The name is the index for the row. TNamedItem (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.11.5.2.7.1.1 |
tmnxOamSysPerfReqTypeLocalTestTxThe value of tmnxOamSysPerfReqTypeLocalTestTx indicates the number of
echo request packets transmitted by locally initiated tests (since the
last clear) for the echo request packet type specified by
tmnxOamSysPerfReqTypeName.ro Counter32 UNITS "echo request packets" .1.3.6.1.4.1.6527.3.1.2.11.5.2.7.1.2 |
tmnxOamSysPerfReqTypeRemoteTstRxThe value of tmnxOamSysPerfReqTypeRemoteTstRx indicates the number of
echo request packets received from remotely initiated tests (since the
last clear) for the echo request packet type specified by
tmnxOamSysPerfReqTypeName.ro Counter32 UNITS "echo request packets" .1.3.6.1.4.1.6527.3.1.2.11.5.2.7.1.3 |
tmnxOamSysSessionLimitThe value of tmnxOamSysSessionLimit indicates the maximum number of
OAM sessions available on this node. OAM sessions are allocated and
freed as described in the tmnxOamSysSessionCount DESCRIPTION clause.ro Gauge32 UNITS "sessions" .1.3.6.1.4.1.6527.3.1.2.11.5.2.8 |
tmnxOamSysSessionCountThe value of tmnxOamSysSessionCount indicates the number of OAM
sessions currently allocated on this node.
One OAM session is allocated when a test is configured (in the case of
some test types) or activated (in the remaining cases). Tests with the
following test types allocate OAM sessions:
1. SDP keep-alive.
2. Static route CPE check.
3. Filter redirect policy ping test.
4. VRRP policy host unreachable ping test.
5. Any OAM or SAA test configured using TIMETRA-OAM-TEST-MIB.
The session is freed when the test is deactivated or deleted.
tmnxOamSysSessionCount will not exceed tmnxOamSysSessionLimit.
Configuration or activation of a test will fail when
tmnxOamSysSessionCount equals tmnxOamSysSessionLimit.ro Gauge32 UNITS "sessions" .1.3.6.1.4.1.6527.3.1.2.11.5.2.9 |
tmnxOamMplsEchoDownstreamMapTlvThe value of tmnxOamMplsEchoDownstreamMapTlv specifies the system value
for the type of downstream map TLV to be inserted when launching MPLS
echo requests.
The value of tmnxOamMplsEchoDownstreamMapTlv is used on three
occasions:
1. When a background LDP tree trace test is started (using
tmnxOamLTtraceAutoAdminState), the value of
tmnxOamMplsEchoDownstreamMapTlv specifies the type of downstream map
TLV used during the test.
2. When a test of type 'lspTraceRoute' is created, with no value
specified for the test's tmnxOamLspTrCtlDownstreamMapTlv object,
tmnxOamLspTrCtlDownstreamMapTlv is set to the value of
tmnxOamMplsEchoDownstreamMapTlv.
3. When a test of type 'ldpTreeTrace' is created, with no value
specified for the test's tmnxOamLTtraceCtlDownstreamMpTlv object,
tmnxOamLTtraceCtlDownstreamMpTlv is set to the value of
tmnxOamMplsEchoDownstreamMapTlv.
Example usage, for the second and third cases: suppose every node in
this node's network supports the MPLS Echo Request/Reply DDMAP TLV, and
the network operator wishes to use the enhanced functionality offered
by the DDMAP TLV. Then, setting tmnxOamMplsEchoDownstreamMapTlv to
'ddmap(2)' simplifies configuration. The simplification: the
tmnxOamLspTrCtlDownstreamMapTlv and tmnxOamLTtraceCtlDownstreamMpTlv
objects need not be set when creating tests.rw TmnxOamMplsEchoDownMapTlv .1.3.6.1.4.1.6527.3.1.2.11.5.3 |
tmnxOamTestNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.3.11 |
tmnxOamPingNotifyPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.3.11.1 |
tmnxOamPingNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.3.11.1.0 |
tmnxOamPingProbeFailedGenerated when a probe failure is detected when the
corresponding tmnxOamPingCtlTrapGeneration object is set to
probeFailure(0) subject to the value of
tmnxOamPingCtlTrapProbeFailureFilter. The object
tmnxOamPingCtlTrapProbeFailureFilter can be used to specify the
number of successive probe failures that are required
before this notification can be generated. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.11.1.0.1 |
tmnxOamPingTestFailedGenerated when a ping test is determined to have failed
when the corresponding tmnxOamPingCtlTrapGeneration object is
set to testFailure(1). In this instance
tmnxOamPingCtlTrapTestFailureFilter should specify the number of
probes in a test required to have failed in order to
consider the test as failed. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.11.1.0.2 |
tmnxOamPingTestCompletedGenerated at the completion of a ping test when the
corresponding tmnxOamPingCtlTrapGeneration object is set to
testCompletion(2). NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.11.1.0.3 |
tmnxOamPingProbeFailedV2Generated when a probe failure is detected when the
corresponding tmnxOamPingCtlTrapGeneration object is set to
probeFailure(0) subject to the value of
tmnxOamPingCtlTrapProbeFailureFilter. The object
tmnxOamPingCtlTrapProbeFailureFilter can be used to specify the
number of successive probe failures that are required
before this notification can be generated. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.11.1.0.4 |
tmnxOamPingTestFailedV2Generated when a ping test is determined to have failed
when the corresponding tmnxOamPingCtlTrapGeneration object is
set to testFailure(1). In this instance
tmnxOamPingCtlTrapTestFailureFilter should specify the number of
probes in a test required to have failed in order to
consider the test as failed. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.11.1.0.5 |
tmnxOamPingTestCompletedV2Generated at the completion of a ping test when the
corresponding tmnxOamPingCtlTrapGeneration object is set to
testCompletion(2). NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.11.1.0.6 |
tmnxAncpLoopbackTestCompletedThis Notification is sent whenever a ANCP loopback
is finished for which a notification was explictly requested. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.11.1.0.7 |
tmnxOamPingProbeFailedV3[CAUSE] The tmnxOamPingProbeFailedV3 notification is sent at the end of
an OAM or SAA test run, when a sufficient number of successive probes
failed.
The notification is sent if both of the following conditions are met:
1. The 'probeFailure(0)' bit of the tmnxOamPingCtlTrapGeneration BITS
object is enabled, AND
2. The test run includes at least one occurrence of N successive probe
failures, where N is configured using
tmnxOamPingCtlTrapProbeFailureFilter.
This notification is sent at most once per test run.
[EFFECT] Informational. The probe failures may indicate a problem with
live traffic flow.
[RECOVERY] Investigate the cause of the probe failures. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.11.1.0.8 |
tmnxOamPingTestFailedV3Generated when a ping test is determined to have failed
when the corresponding tmnxOamPingCtlTrapGeneration object is
set to testFailure(1). In this instance
tmnxOamPingCtlTrapTestFailureFilter should specify the number of
probes in a test required to have failed in order to
consider the test as failed. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.11.1.0.9 |
tmnxOamPingTestCompletedV3Generated at the completion of a ping test when the
corresponding tmnxOamPingCtlTrapGeneration object is set to
testCompletion(2). NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.11.1.0.10 |
tmnxOamTraceRouteNotifyPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.3.11.2 |
tmnxOamTraceRouteNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.3.11.2.0 |
tmnxOamTrPathChangeThe path to a target has changed. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.11.2.0.1 |
tmnxOamTrTestFailedThe OAM trace route test failed to complete successfully. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.11.2.0.2 |
tmnxOamTrTestCompletedThe OAM trace route test has just been completed. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.11.2.0.3 |
tmnxOamLdpTtraceAutoDiscStateThe tmnxOamLdpTtraceAutoDiscState notification is generated when
the discovery state of the 'Auto LDP Tree Trace entity' represented by
tmnxOamLTtraceAutoDiscoveryState has been changed. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.11.2.0.4 |
tmnxOamLdpTtraceFecProbeStateThe tmnxOamLdpTtraceFecProbeState notification is generated when
the probe state of the 'auto discovered FEC' has been changed. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.11.2.0.5 |
tmnxOamLdpTtraceFecDisStatusThe tmnxOamLdpTtraceFecDisStatus notification is generated when
the discovery status BITS or the number of discovered paths of the
'auto discovered FEC' has been changed. Note that the changes are
evaluated at the end of a FEC discovery. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.11.2.0.6 |
tmnxOamLdpTtraceFecPFailUpdateThe tmnxOamLdpTtraceFecPFailUpdate notification is generated when
there is a probe state change in any of the relevant discovered paths
while the overall FEC probe state, tmnxOamLTtraceFecProbeState is in
'partially failed' state. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.11.2.0.7 |
tmnxOamSaaNotifyPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.3.11.3 |
tmnxOamSaaNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.3.11.3.0 |
tmnxOamSaaThresholdGenerated at the completion of an SAA OAM trace route
test when a threshold has been crossed for a results
statistic. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.11.3.0.1 |