TIMETRA-LOG-MIB
AI MIB Summary
The TIMETRA-LOG-MIB enables SNMP-based configuration and monitoring of logging utility parameters, event generation rules, and log buffer states on Nokia SR OS (SROS) routers. It facilitates the retrieval of system log severity levels, destination settings, and buffer utilization metrics for centralized network event management.
This document is the SNMP MIB module to manage and provision the Nokia SROS Logging utility.
Copyright 2003-2020 Nokia. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included.
This SNMP MIB module (Specification) embodies Nokia's proprietary intellectual property. Nokia retains all title and ownership in the Specification, including any revisions.
Nokia grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Nokia products, and without fee, provided this copyright notice and license appear on all copies.
This Specification is supplied 'as is', and Nokia makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
Main OID:
timetraLogMIBModule.1.3.6.1.4.1.6527.1.1.3.12
377
Objects
Active
Status
10
Dependencies
Imported Objects
Objects
377 total| Object Name |
|---|
timetraLogMIBModuleThis document is the SNMP MIB module to manage and provision the Nokia
SROS Logging utility.
Copyright 2003-2020 Nokia. All rights reserved.
Reproduction of this document is authorized on the condition that
the foregoing copyright notice is included.
This SNMP MIB module (Specification) embodies Nokia's
proprietary intellectual property. Nokia retains
all title and ownership in the Specification, including any
revisions.
Nokia grants all interested parties a non-exclusive license to use and
distribute an unmodified copy of this Specification in connection with
management of Nokia products, and without fee, provided this copyright
notice and license appear on all copies.
This Specification is supplied 'as is', and Nokia makes no warranty,
either express or implied, as to the use, operation, condition, or
performance of the Specification. MODULE-IDENTITY .1.3.6.1.4.1.6527.1.1.3.12 |
tmnxLogConformance OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.12 |
tmnxLogCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.12.1 |
tmnxLogGroups OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.12.2 |
tmnxLogObjs OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.12 |
tmnxLogNotificationObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.12.1 |
tmnxLogFileDeletedLogIdThe value of tmnxLogFileDeletedLogId indicates with which event log-id
or accounting-policy-id the deleted file was associated. Note the
corresponding entry in the tmnxLogIdTable or tmnxLogApTable may no
longer exist.ro TmnxLogIdIndex .1.3.6.1.4.1.6527.3.1.2.12.1.1 |
tmnxLogFileDeletedFileIdThe value of tmnxLogFileDeletedFileId indicates with which event
log-id or accounting-policy-id the deleted file was associated. Note
that the corresponding entry in the tmnxLogFileIdTable may no longer
exist.ro TmnxLogFileId .1.3.6.1.4.1.6527.3.1.2.12.1.2 |
tmnxLogFileDeletedLogTypeThe value of tmnxLogFileDeletedLogType indicates whether the deleted
file was an 'eventLog' or 'accountingPolicy'.ro TmnxLogFileType .1.3.6.1.4.1.6527.3.1.2.12.1.3 |
tmnxLogFileDeletedLocationThe value of tmnxLogFileDeletedLocation indicates on which compact
flash device the event log or accounting policy file that has been
deleted was located.ro TmnxCFlash .1.3.6.1.4.1.6527.3.1.2.12.1.4 |
tmnxLogFileDeletedNameThe value of tmnxLogFileDeletedName indicates the pathname of an event
log or accounting policy file that has been deleted because of space
contention on a compact flash device.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.12.1.5 |
tmnxLogFileDeletedCreateTimeThe value of tmnxLogFileDeletedCreateTime indicates the date and time
when the deleted file had been created.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.12.1.6 |
tmnxLogTraceErrorTitleThe value of tmnxLogTraceErrorTitle indicates the title string of the
trace error event that generated the tmnxLogTraceError notification.ro DisplayString .1.3.6.1.4.1.6527.3.1.2.12.1.7 |
tmnxLogTraceErrorSubjectThe value of tmnxLogTraceErrorSubject indicates the subject string of
the trace error event that generated the tmnxLogTraceError
notification.
The subject is the entity that originated the event, such as the Slot
ID.ro DisplayString .1.3.6.1.4.1.6527.3.1.2.12.1.8 |
tmnxLogTraceErrorMessageThe value of tmnxLogTraceErrorMessage indicates the message text
string of the trace error event that generated the tmnxLogTraceError
notification.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.12.1.9 |
tmnxLogThrottledEventIDtmnxLogThrottledEventID is used by the tmnxLogEventThrottled
notification to indicate the NOTIFICATION-TYPE object identifier of
the throttled event.ro OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.12.1.10 |
tmnxLogThrottledEventstmnxLogThrottledEvents is used by the tmnxLogEventThrottled
notification to indicate the number of events dropped because of event
throttling during the last throttle interval.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.12.1.11 |
tmnxSysLogTargetIdtmnxSysLogTargetId is used by the tmnxSysLogTargetProblem notification
to indicate the involved TmnxSyslogId.ro TmnxSyslogId .1.3.6.1.4.1.6527.3.1.2.12.1.12 |
tmnxSysLogTargetProblemDescrThe value of tmnxSysLogTargetProblemDescr indicates the type of error
encountered when trying to deliver events to the destination specified
in the TmnxSyslogId.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.12.1.13 |
tmnxLogNotifyApIntervalThe value of tmnxLogNotifyApInterval indicates how frequently the
statistics are collected and written to their destination.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.12.1.14 |
tmnxStdReplayStartEventThe value of tmnxStdReplayStartEvent indicates the SNMP notification
request ID of the first missed event that was replayed when an SNMP
notification target address was readded to the RTM following a period
when the target address had been removed. It is used by the
tmnxStdEventsReplayed notification.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.12.1.15 |
tmnxStdReplayEndEventThe value of tmnxStdReplayEndEvent indicates the SNMP notification
request ID of the last missed event that was replayed when an SNMP
notification target address was readded to the RTM following a period
when the target address had been removed. It is used by the
tmnxStdEventsReplayed notification.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.12.1.16 |
tmnxEhsHEntryMinDelayIntervalThe value of tmnxEhsHEntryMinDelayInterval indicates the difference
between the current time and the time as mentioned in
tmnxEhsHEntryLastExecuted.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.12.1.17 |
logCustomEventSubjectThe value of the object logCustomEventSubject custom text which will
be used as subject in Logger 2020 - 2025 tmnxCustomEvent1 - 6 event.ro DisplayString .1.3.6.1.4.1.6527.3.1.2.12.1.19 |
logCustomEventMessageStringThe value of the object logCustomEventMessageString custom text which
will be used as message in Logger 2020 - 2025 tmnxCustomEvent1 - 6
event.ro OCTET STRING .1.3.6.1.4.1.6527.3.1.2.12.1.20 |
logCustomEventParameter1The value of the object logCustomEventParameter1 custom text which
will be used in Logger 2020 - 2025 tmnxCustomEvent1 - 6 event.ro OCTET STRING .1.3.6.1.4.1.6527.3.1.2.12.1.21 |
logCustomEventParameter2The value of the object logCustomEventParameter2 custom text which
will be used in Logger 2020 - 2025 tmnxCustomEvent1 - 6 event.ro OCTET STRING .1.3.6.1.4.1.6527.3.1.2.12.1.22 |
logCustomEventParameter3The value of the object logCustomEventParameter3 custom text which
will be used in Logger 2020 - 2025 tmnxCustomEvent1 - 6 event.ro OCTET STRING .1.3.6.1.4.1.6527.3.1.2.12.1.23 |
logCustomEventParameter4The value of the object logCustomEventParameter4 custom text which
will be used in Logger 2020 - 2025 tmnxCustomEvent1 - 6 event.ro OCTET STRING .1.3.6.1.4.1.6527.3.1.2.12.1.24 |
logCustomEventParameter5The value of the object logCustomEventParameter5 custom text which
will be used in Logger 2020 - 2025 tmnxCustomEvent1 - 6 event.ro OCTET STRING .1.3.6.1.4.1.6527.3.1.2.12.1.25 |
logCustomEventParameter6The value of the object logCustomEventParameter6 custom text which
will be used in Logger 2020 - 2025 tmnxCustomEvent1 - 6 event.ro OCTET STRING .1.3.6.1.4.1.6527.3.1.2.12.1.26 |
logCustomEventParameter7The value of the object logCustomEventParameter7 custom text which
will be used in Logger 2020 - 2025 tmnxCustomEvent1 - 6 event.ro OCTET STRING .1.3.6.1.4.1.6527.3.1.2.12.1.27 |
logCustomEventParameter8The value of the object logCustomEventParameter8 custom text which
will be used in Logger 2020 - 2025 tmnxCustomEvent1 - 6 event.ro OCTET STRING .1.3.6.1.4.1.6527.3.1.2.12.1.28 |
tmnxNetconfStreamDropCountThe value of tmnxNetconfStreamDropCount indicates number of dropped
Netconf Notifications per Netconf stream.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.12.1.29 |
tmnxLogMaxLogsThe maximum number of concurrent active Logs that are allowed. A value
of zero (0) for this object implies that there is no limit for the
number of concurrent active logs in effect.
The maximum number of logs in the Base context is restricted to 30 and
in the VPRN context to 30.rw Unsigned32 UNITS "logs" .1.3.6.1.4.1.6527.3.1.2.12.2 |
tmnxLogFileIdTableDefines the Nokia SROS series Log File ID Table for providing, via
SNMP, the capability of defining the characteristics for log and
accounting files and associating them with a file-id. The actual file
is not created until the file-id is used in a log or accounting file
configuration. SEQUENCE OF TmnxLogFileIdEntry .1.3.6.1.4.1.6527.3.1.2.12.3 |
tmnxLogFileIdEntryDefines an entry in the tmnxLogFileIdTable. Entries are created
and deleted in this table by SNMP sets to tmnxLogFileIdRowStatus. TmnxLogFileIdEntry .1.3.6.1.4.1.6527.3.1.2.12.3.1 |
tmnxLogFileIdThe index value tmnxLogFileId uniquely identifies a file-id to be used
when creating a log or accounting file. TmnxLogFileId .1.3.6.1.4.1.6527.3.1.2.12.3.1.1 |
tmnxLogFileIdRowStatusThis object allows entries to be created and deleted
in the tmnxLogFileIdTable. Deletion of an entry in this
table will not succeed if it is currently used by any log
or accounting file.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.12.3.1.2 |
tmnxLogFileIdStorageTypeThe storage type for this conceptual row. Conceptual rows having the
value 'permanent' need not allow write access to any columnar objects
in the row.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.12.3.1.3 |
tmnxLogFileIdRolloverTimeThe value of tmnxLogFileIdRolloverTime specifies how often, in
minutes, a new log or accounting file will be created. If the value
of tmnxLogFileIdLogType is not 'rollover', then the value of this
object is irrelevant.rw Integer32 .1.3.6.1.4.1.6527.3.1.2.12.3.1.4 |
tmnxLogFileIdRetainTimeThe value of tmnxLogFileIdRetainTime specifies the minimum time,
in hours, that a file is retained on the media. Once this time
period has expired the file is deleted.rw Integer32 .1.3.6.1.4.1.6527.3.1.2.12.3.1.5 |
tmnxLogFileIdAdminLocationThe value of tmnxLogFileIdAdminLocation specifies where the log
or accounting file should be created. The file location should be a
compact flash on the primary CPM. When the secondary CPM becomes
the primary CPM after a failure, the same log file policies will
be activated. Thus it is recommended that the same media is
available to both secondary and primary CPMs.
If no location is specified, 0, the compact flash cf1: is used to
store the log files, if not available then cf2: then cf4 then cf3: ;
or cf2: is used to store accounting files, if not available then cf1:
then cf4: then cf3: .rw TmnxCFlash .1.3.6.1.4.1.6527.3.1.2.12.3.1.6 |
tmnxLogFileIdOperLocationThe value of tmnxLogFileIdOperLocation indicates where the log
or accounting file has been created. The file location should be a
compact flash on the primary CPM. When the secondary CPM becomes
the primary CPM after a failure, the same log file policies will
be activated. Thus it is recommended that the same media is
available to both secondary and primary CPMs.ro TmnxCFlash .1.3.6.1.4.1.6527.3.1.2.12.3.1.7 |
tmnxLogFileIdDescriptionThe value of tmnxLogFileIdDescription is a user provided description
string for this log file-id entry. It can consist of any printable,
seven-bit ASCII characters up to 80 characters in length.rw TItemDescription (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.12.3.1.8 |
tmnxLogFileIdLogTypeThe value of tmnxLogFileIdLogType indicates the type of information
that will be written to this file.ro TmnxLogFileType .1.3.6.1.4.1.6527.3.1.2.12.3.1.9 |
tmnxLogFileIdLogIdThe value of tmnxLogFileIdLogId indicates the ID index of the log or
accounting policy this file is attached to. A value of zero (0)
indicates that this file definition is not currently used by any
log or accounting policy.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.12.3.1.10 |
tmnxLogFileIdPathNameThe value of tmnxLogFileIdPathName is the pathname of the currently
opened file used by this file-id entry. The value of
tmnxLogFileIdPathName is affected by the value of stiPreferLocalTime.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.12.3.1.11 |
tmnxLogFileIdCreateTimeThe value of tmnxLogFileIdCreateTime is the time the currently opened
file version used by this file-id entry was created. The value of
tmnxLogFileIdCreateTime is affected by the value of
stiPreferLocalTime.ro DateAndTime .1.3.6.1.4.1.6527.3.1.2.12.3.1.12 |
tmnxLogFileIdBackupLocThe value of tmnxLogFileIdBackupLoc specifies where the log
or accounting file should be created if it cannot be created in
the location specified by tmnxLogFileIdAdminLocation. The file
location should be a compact flash on the primary CPM. When the
secondary CPM becomes the primary CPM after a failure, the same
log file policies will be activated. Thus it is recommended that
the same media is available to both secondary and primary CPMs.
If no backup location is specified, 0, and the log or accounting file
could not be created in the location specified by
tmnxLogFileIdAdminLocation or the file creation at the specified
backup location fails, a file create failure trap is issued and the
associated log or accounting policy is marked as operationally
'outOfService'.rw TmnxCFlash .1.3.6.1.4.1.6527.3.1.2.12.3.1.13 |
tmnxLogFileIdNameThe value of tmnxLogFileIdName specifies particular entry in the
tmnxLogFileIdTable.rw TLNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.12.3.1.14 |
tmnxLogApTableThe Nokia SROS series Log Accounting Policy Table contains an entry
for each accounting policy that specifies the characteristics of the
accounting records associated with an accounting policy. SEQUENCE OF TmnxLogApEntry .1.3.6.1.4.1.6527.3.1.2.12.4 |
tmnxLogApEntryDefines an entry in the tmnxLogApTable. Entries in the
tmnxLogApTable are created and destroyed via SNMP Set
requests to tmnxLogApRowStatus. TmnxLogApEntry .1.3.6.1.4.1.6527.3.1.2.12.4.1 |
tmnxLogApPolicyIdThe value of tmnxLogApPolicyId uniquely identifies an accounting
policy to be used for creating accounting records. A specific
accounting policy can be applied to one or more service access
points (SAPs). Any changes made to an existing policy is applied
immediately to all SAPs where this policy is applied. Integer32 .1.3.6.1.4.1.6527.3.1.2.12.4.1.1 |
tmnxLogApRowStatusThis object allows entries to be created and deleted
in the tmnxLogApTable. Deletion of an entry in this
table will not succeed if it is currently applied to any
service access point (SAP).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.12.4.1.2 |
tmnxLogApStorageTypeThe storage type for this conceptual row. Conceptual rows having the
value 'permanent' need not allow write access to any columnar objects
in the row.rw LogStorageType .1.3.6.1.4.1.6527.3.1.2.12.4.1.3 |
tmnxLogApAdminStatusThe value of tmnxLogApAdminStatus specifies the desired administrative
state for this accounting policy.rw TmnxAdminState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.12.4.1.4 |
tmnxLogApOperStatusThe value of tmnxLogApOperStatus indicates the current operational
status of this accounting policy.ro TmnxOperState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.12.4.1.5 |
tmnxLogApIntervalThe value of tmnxLogApInterval determines how frequently the
statistics are collected and written to their destination.
If no record is specified, default value for tmnxLogApInterval is 5
minutes. For service and network types of record, default values are 5
minutes and 15 minutes respectively.
For an accounting policy with one of the following record type
(i.e. tmnxLogApRecord) values, the minimum interval is one minute:
completeOamPm(56),
completeSvcActivTestHead(76),
saa(32).
Otherwise the minimum interval is five minutes.rw Integer32 .1.3.6.1.4.1.6527.3.1.2.12.4.1.6 |
tmnxLogApDescriptionThe value of tmnxLogApDescription is a user provided description
string for this accounting policy. It can consist of any printable,
seven-bit ASCII characters up to 80 characters in length.rw TItemDescription (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.12.4.1.7 |
tmnxLogApDefaultWhen tmnxLogApDefault has a value of 'true', it specifies that
this accounting policy is applied to all service access points (SAPs)
that do not have an explicit accounting policy applied. If no
accounting policy is associated with a SAP accounting records are
produced in accordance with the default policy.
Only one accounting policy entry in the tmnxLogApTable can have
tmnxLogApDefault set to 'true'. If there is no entry in the
tmnxLogApTable with tmnxLogApDefault set to 'true', then the
only accounting records collected are those explicitly configured
accounting policies.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.12.4.1.8 |
tmnxLogApRecordThe value of tmnxLogApRecord specifies the type of predefined
accounting record type to be written to the accounting file.
The value 'bsxSubscriberAppGroup (22)' was made obsolete in release
7.0 and replaced by 'customRecordAa (25).'rw Enumeration .1.3.6.1.4.1.6527.3.1.2.12.4.1.9 |
tmnxLogApToFileIdThe value of tmnxLogApToFileId is the index to the entry in the
tmnxLogFileIdTable that specifies the file characteristics to be
used for the destination of the accounting policy records collected
by this accounting policy. The file itself is created the first
time this accounting policy is applied to a service access point
(SAP).
tmnxLogApToFileId must be set along with tmnxLogApToFileType to
indicate whether the records will be stored in a file or not.
When a destination file is specified, the value of the file is
specified by tmnxLogApToFileId and the value of tmnxLogApToFileType
should be 'fileId'.
When the destination file is not specified, the value of
tmnxLogApToFileId should be zero and the value of tmnxLogApToFileType
should be 'noFile'.rw TmnxLogFileId .1.3.6.1.4.1.6527.3.1.2.12.4.1.10 |
tmnxLogApPortTypeThe value of tmnxLogApPortType indicates the type of facility
associated with the specified accounting policy's record type (i.e.
tmnxLogApRecord).ro Enumeration .1.3.6.1.4.1.6527.3.1.2.12.4.1.11 |
tmnxLogApDefaultIntervalWhen tmnxLogApDefaultInterval has a value of 'true', it specifies that
tmnxLogApInterval will have a default value.
When tmnxLogApDefaultInterval has a value of 'false', user can set the
value of tmnxLogApInterval manually.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.12.4.1.12 |
tmnxLogApDataLossCountThe value of tmnxLogApDataLossCount indicates the number of times a
tmnxLogAccountingDataLoss trap was raised against this application
policy.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.12.4.1.13 |
tmnxLogApLastDataLossTimeStampThe value of tmnxLogApLastDataLossTimeStamp indicates the last time,
since system startup that a tmnxLogAccountingDataLoss trap was raised
against this application policy.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.12.4.1.14 |
tmnxLogApToFileTypeThe value of tmnxLogApToFileType specifies where records of an
accounting policy are stored. It should be set along with
tmnxLogApToFileId which specifies the destination file index where the
accounting records are stored.
When the value of tmnxLogApToFileType is 'noFile', it indicates that
the accounting records will not to be stored in a file and the value
of tmnxLogApToFileId should be set to zero.
When the value of tmnxLogApToFileType is 'fileId', it indicates that
the accounting records will be stored in a file specified by
tmnxLogApToFileId.
tmnxLogApOperStatus will transition to 'inService' when the
tmnxLogApToFileType is set to 'noFile' or 'fileId'.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.12.4.1.15 |
tmnxLogApIncludeSystemInfoThe value of tmnxLogApIncludeSystemInfo specifies whether or not to
include system information at the top of each accounting file
generated for a given accounting policy.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.12.4.1.16 |
tmnxLogApAlignIf true generation of accounting statistics is aligned with absolute
time. First statistics are generated when absolute time is dividable
by collection-interval value. After that it continues with
collection-interval. This is important for synchronization of
statistics interval between various nodes in network. If false,
generation of accounting statistics is triggered right after command
execution and continues after configured collection-interval. type
that do not have an accounting policy.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.12.4.1.17 |
tmnxLogIdTableThe Nokia SROS series Log Identification Table contains an entry for
each log that specifies the characteristics of that log associated
with a log-id number. SEQUENCE OF TmnxLogIdEntry .1.3.6.1.4.1.6527.3.1.2.12.5 |
tmnxLogIdEntryDefines an entry in the tmnxLogIdTable. Entries in the
tmnxLogIdTable are created and destroyed via SNMP Set
requests to tmnxLogIdRowStatus. Default log entries 99,
and 100 are created by the agent. TmnxLogIdEntry .1.3.6.1.4.1.6527.3.1.2.12.5.1 |
tmnxLogIdIndexThe value of tmnxLogIdIndex uniquely identifies an event stream log. TmnxLogIdIndex .1.3.6.1.4.1.6527.3.1.2.12.5.1.1 |
tmnxLogIdRowStatusThis object allows entries to be created and deleted
in the tmnxLogIdTable. Deletion of an entry in this
table will not succeed if tmnxLogIdOperStatus is not
'outOfService'. tmnxLogIdOperStatus will not transition
to 'inService' if tmnxLogIdSource and tmnxLogIdDestination
and their associated objects have not been set to valid values.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.12.5.1.2 |
tmnxLogIdStorageTypeThe storage type for this conceptual row. Conceptual rows having the
value 'permanent' need not allow write access to any columnar objects
in the row.rw LogStorageType .1.3.6.1.4.1.6527.3.1.2.12.5.1.3 |
tmnxLogIdAdminStatusThe value of tmnxLogIdAdminStatus specifies the desired administrative
state for this log.rw TmnxAdminState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.12.5.1.4 |
tmnxLogIdOperStatusThe value of tmnxLogIdOperStatus indicates the current operational
status of this log.ro TmnxOperState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.12.5.1.5 |
tmnxLogIdDescriptionThe value of tmnxLogIdDescription is a user provided description
string for this log. It can consist of any printable,
seven-bit ASCII characters up to 80 characters in length.rw TItemDescription (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.12.5.1.6 |
tmnxLogIdFilterIdThe value of tmnxLogIdFilterId is the index into the
tmnxLogFilterTable to the entry the defines a filter to be
applied to this log's source event stream to limit the events
output to this log's destination. If tmnxLogIdFilterId has a
value of 0, then all events in the source log are forwarded
to the destination.rw TmnxLogFilterId .1.3.6.1.4.1.6527.3.1.2.12.5.1.7 |
tmnxLogIdSourceThe value of tmnxLogIdSource is a bit mask that specifies the
log event source stream(s) to be forwarded to the destination
specified in tmnxLogIdDestination. Events from more than one
source may be forwarded to the log destination.
The 'main' event stream consists of all events that are not explicitly
directed to any other event stream.
The 'security' event stream contains all events that affect attempts
to breach system security such as failed login attempts, attempts to
access SNMP MIB tables to which the user has not been granted access,
or attempts to enter a branch of the CLI for which the user is not
authorized.
The 'user' activity event stream contains all events that directly
affect the configuration or operation of the system.
The 'debugTrace' event stream contains all events configured for
application or protocol tracing.
The 'li' event stream contains all events configured for Lawful
Intercept activities. An attempt to set the 'li' event stream
will fail with an inconsistentValue error if the requestor does
not have access to the 'li' context. An attempt to set the 'li'
event stream will fail with an inconsistentValue error if
tmnxLogIdDestination has the value 'syslog' or 'file'.rw Bits .1.3.6.1.4.1.6527.3.1.2.12.5.1.8 |
tmnxLogIdDestinationThe value of tmnxLogIdDestination specifies the event log stream
destination. Once this object has been set to a value other than
the default 'none' it cannot be modified and attempts to reset
it to another value will fail with an INCONSISTENT VALUE error.
The 'console' destination causes all selected log events to be
directed to the system console. If the console is not connected
then all entries are dropped.
The 'syslog' destination sends all selected log events to the
syslog address configured in tmnxSyslogTargetAddress and
tmnxSyslogTargetUdpPort in the tmnxSyslogTargetTable row entry
pointed to by the value of tmnxLogIdSyslogId. An attempt to
set this object to 'syslog' will fail with an inconsistentValue
error if tmnxLogIdSource has the value 'li' set.
The 'snmpTraps' destination causes events defined as SNMP traps
to be sent to the configured SNMP trap destinations and also to
be logged in the NOTIFICATION-LOG-MIB tables. The allocated memory
size for the log of transmitted traps is specified in
tmnxLogIdMaxMemorySize. The events are logged to memory in a circular
fashion. Once the space is full, the oldest entry is replaced with
a new entry.
The 'file' destination causes all selected log events to be
directed to a file on one of the CPM's compact flash discs.
Details of the file's configuration are in the tmnxLogFileIdTable
entry pointed to by the value of tmnxLogIdFileId. An attempt to
set this object to 'file' will fail with an inconsistentValue
error if tmnxLogIdSource has the value 'li' set.
The 'memory' destination causes all selected log events to be
directed to an in memory storage area. The allocated memory size
for the log is specified in tmnxLogIdMaxMemorySize. The events are
logged to memory in a circular fashion. Once the space is full,
the oldest entry is replaced with a new entry.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.12.5.1.9 |
tmnxLogIdFileIdThe value of tmnxLogIdFileId is the index to the entry in the
tmnxLogFileIdTable that specifies the file characteristics to be used
for the destination of the log events written to this log.
tmnxLogIdOperStatus will not transition to 'inService' until a
valid value has been set for tmnxLogIdFileId. This object is
valid only if tmnxLogIdDestination is set to 'file'.
This object can be set only once together with tmnxLogIdDestination
value of 'file'.rw TmnxLogFileId .1.3.6.1.4.1.6527.3.1.2.12.5.1.10 |
tmnxLogIdSyslogIdThe value of tmnxLogIdSyslogId is the index into the
tmnxSyslogTargetTable for the row entry with the information to format
event messages to be sent to a specific syslog collector target.
This object is valid only when tmnxLogIdDestination has a value of
'syslog'. If this object has a value of zero (0), then no collector
is specified and no messages are sent.
This object can be set only once together with tmnxLogIdDestination
value of 'syslog'.rw TmnxSyslogIdOrEmpty .1.3.6.1.4.1.6527.3.1.2.12.5.1.11 |
tmnxLogIdMaxMemorySizeThe value of tmnxLogIdMaxMemorySize specifies the amount of memory to
allocate for this log. This object can be set only once together with
tmnxLogIdDestination has a value of 'memory', 'netconf', 'snmpTraps' or 'subscribedCli'.
For any other value of tmnxLogIdDestination, a read of this object will return zero (0).
Once a memory size has been specified and the log created, any attempt
to modify this object will fail with an INCONSISTENT VALUE error.rw Unsigned32 (0 | 50..3000) UNITS "events" .1.3.6.1.4.1.6527.3.1.2.12.5.1.12 |
tmnxLogIdConsoleSessionThis object exists for the convenience of the Nokia SROS CLI.
When set to 'true' it indicates that the 'CONSOLE' log output
should be printed to the Telnet session instead of the CONSOLE
device. When a tmnxLogIdEntry is created directly via SNMP,
setting this object has no meaning and the 'CONSOLE' log output
will always be sent to the CONSOLE device. This object is obsoleted
in 15.0 Release.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.12.5.1.13 |
tmnxLogIdForwardedThe value of tmnxLogIdForwarded is the count of the number of events
that have been forwarded to this log's destination. This counter is
incremented after an event has been selected by the log filter defined
in tmnxLogIdFilterId.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.12.5.1.14 |
tmnxLogIdDroppedThe value of tmnxLogIdDropped is the count of the number of events
that have been sent to this logs source(s) and that have not been
forwarded to the log destination because they were filtered out by the
log filter defined in tmnxLogIdFilterId.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.12.5.1.15 |
tmnxLogIdTimeFormatThe value of tmnxLogIdTimeFormat specifies the type of timestamp
format for events sent to logs where tmnxLogIdDestination has a value
of either 'syslog (2)' or 'file (4)'.
When tmnxLogIdTimeFormat has a value of 'utc (1)' timestamps are
written using the Coordinated Universal Time value. When
tmnxLogIdTimeFormat has a value of 'local (2)' timestamps are
written in the system's local time.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.12.5.1.16 |
tmnxLogIdPythonPolicyThe value of tmnxLogIdPythonPolicy specifies the name of a Python
policy.
The name refers to a conceptual row in the
TIMETRA-PYTHON-MIB::tmnxPythonPolicyTable. The Python policy should
have Python scripts to modify the log message text.
While the value of tmnxLogIdAdminStatus is equal to 'inService', a
non-empty value for this object is only allowed if the value of
tmnxLogIdDestination is equal to 'syslog'.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.12.5.1.17 |
tmnxLogIdOperDestinationThe value of tmnxLogIdOperDestination indicates the operational value
of event log stream destination.
The 'console' destination indicates all selected log events will be
directed to the system console.
The 'syslog' destination indicates all selected log events will be
directed to the syslog address configured in tmnxSyslogTargetAddress
and tmnxSyslogTargetUdpPort in the tmnxSyslogTargetTable row entry
pointed to by the value of tmnxLogIdSyslogId.
The 'snmpTraps' destination indicates events defined as SNMP traps
will be sent to the configured SNMP trap destinations and also to be
logged in the NOTIFICATION-LOG-MIB tables.
The 'file' destination indicates all selected log events will be
directed to a file on one of the CPM's compact flash discs.
The 'memory' destination indicates all selected log events will be
directed to an in memory storage area.
The 'cliSession' destination indicates all selected log events will be
directed to a cli session. tmnxLogIdDestination will have a value
'none' in this case.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.12.5.1.18 |
tmnxLogIdNetconfStreamThe value of tmnxLogIdNetconfStream specifies the name of the NETCONF
stream associated with this log.
A non-empty value for this object is only allowed if the value of
tmnxLogIdDestination is equal to 'netconf'.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.12.5.1.19 |
tmnxLogIdNameThe value of tmnxLogIdName specifies an event stream log.rw TLNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.12.5.1.20 |
tmnxLogLiUsingVPRNvRtrIDThe value of tmnxLogLiUsingVPRNvRtrID specifies vRtrID for send LI
traps using related VPRN.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.12.5.1.21 |
tmnxLogFilterTable SEQUENCE OF TmnxLogFilterEntry .1.3.6.1.4.1.6527.3.1.2.12.6 |
tmnxLogFilterEntryInformation about a particular Log Filter entry.
Entries are created by user. Entries are deleted by user. Entry 1001
is created by the agent for default TmnxLogIdIndex 100.
There is no StorageType object. Entries have a presumed
StorageType of nonVolatile. TmnxLogFilterEntry .1.3.6.1.4.1.6527.3.1.2.12.6.1 |
tmnxLogFilterIdThe value of tmnxLogFilterId is a unique index that identifies a
particular entry in the tmnxLogFilterTable. TmnxLogFilterId .1.3.6.1.4.1.6527.3.1.2.12.6.1.1 |
tmnxLogFilterRowStatusRow entries in this table are created and destroyed via SNMP set
requests.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.12.6.1.2 |
tmnxLogFilterDescriptionThe value of tmnxLogFilterDescription is a user provided description
string for this log filter. It can consist of any printable,
seven-bit ASCII characters up to 80 characters in length.rw TItemDescription (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.12.6.1.3 |
tmnxLogFilterDefaultActionThe action to take for packets that do not match any filter entries.
the values default(3), and nat(5) are not allowed.rw TFilterAction (TIMETRA-FILTER-MIB) .1.3.6.1.4.1.6527.3.1.2.12.6.1.4 |
tmnxLogFilterInUseWhen tmnxLogFilterInUse has a value of 'true', this filter is
attached to a log file configuration. The same tmnxLogFilterEntry
can be attached to more than one log file.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.12.6.1.5 |
tmnxLogFilterNameThe value of tmnxLogFilterName specifies particular entry in the
tmnxLogFilterTable.rw TLNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.12.6.1.6 |
tmnxLogFilterParamsTableA table of all log filter match entries for all log filters. SEQUENCE OF TmnxLogFilterParamsEntry .1.3.6.1.4.1.6527.3.1.2.12.7 |
tmnxLogFilterParamsEntryInformation about a particular Log Filter Parameter entry. Every Log
Filter can have zero or more Log Filter Parameter match entries.
The Log Filter parameter entries are checked in ascending order by
their index value, tmnxLogFilterParamsIndex. Upon the first successful
match, the specified actions are applied as indicated by the value of
tmnxLogFilterParamsAction. No further checking against
remaining tmnxLogFilterParamsEntry rows is done. Therefore, entries
in this table should be sequenced from most to least explicit match
criterion. It is recommended that multiple parameter entries for a log
filter should be created with gaps between their index values. This
allows a new entry to be inserted into an existing filter policy
without needing to renumber the already existing filter parameters
entries.
A log filter entry in the tmnxLogFilterTable with no entry in the
tmnxLogFilterParamsTable to define its match criteria set will match
every log event, and the default action specified by
tmnxLogFilterDefaultAction will be taken.
Entries are created by user. Entries are deleted by user.
There is no StorageType object, entries have a presumed StorageType of
nonVolatile. TmnxLogFilterParamsEntry .1.3.6.1.4.1.6527.3.1.2.12.7.1 |
tmnxLogFilterParamsIndex TmnxLogFilterEntryId .1.3.6.1.4.1.6527.3.1.2.12.7.1.1 |
tmnxLogFilterParamsRowStatusRow Status for this Log filter's parameter entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.12.7.1.2 |
tmnxLogFilterParamsDescriptionThe value of tmnxLogFilterParamsDescription is a user provided
description string for this log filter match entry. It can consist
of any printable, seven-bit ASCII characters up to 80 characters in
length.rw TItemDescription (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.12.7.1.3 |
tmnxLogFilterParamsActionthe action to take for log events that match this filter entry.
the value default(3) is allowed. If tmnxLogFilterParamsAction
has the value 'default', the action specified by the value
of tmnxLogFilterDefaultAction is applied to events that match
this filter entry. The value nat(5) is not allowed.rw TFilterActionOrDefault (TIMETRA-FILTER-MIB) .1.3.6.1.4.1.6527.3.1.2.12.7.1.4 |
tmnxLogFilterParamsApplicationMatches log events with the specified application name. An
application is the software entity the reports the log event and
includes IP, MPLS, OSPF, CLI, SERVICES, etc.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.12.7.1.5 |
tmnxLogFilterParamsApplOperatorThe value of tmnxLogFilterParamsApplOperator is the comparison
operator to use to determine if the log event matches the value
of tmnxLogFilterParamsApplication. The only valid values from
TmnxLogFilterOperator are 'off', 'equal', and 'notEqual'.rw TmnxLogFilterOperator .1.3.6.1.4.1.6527.3.1.2.12.7.1.6 |
tmnxLogFilterParamsNumberThe value of tmnxLogFilterParamsNumber is the log event number to
be matched. Event numbers uniquely identify a certain event within
an application but not across applications.rw TmnxEventNumber .1.3.6.1.4.1.6527.3.1.2.12.7.1.7 |
tmnxLogFilterParamsNumberOperatorThe value of tmnxLogFilterParamsNumberOperator is the comparison
operator to use to determine if the log event matches the value of
tmnxLogFilterParamsNumber.rw TmnxLogFilterOperator .1.3.6.1.4.1.6527.3.1.2.12.7.1.8 |
tmnxLogFilterParamsSeverityThe value of tmnxLogFilterParamsSeverity is the log event severity
level to be matched.rw TmnxPerceivedSeverity .1.3.6.1.4.1.6527.3.1.2.12.7.1.9 |
tmnxLogFilterParamsSeverityOperatorThe value of tmnxLogFilterParamsSeverityOperator is the comparison
operator to use to determine if the log event matches the value of
tmnxLogFilterParamsSeverity.rw TmnxLogFilterOperator .1.3.6.1.4.1.6527.3.1.2.12.7.1.10 |
tmnxLogFilterParamsSubjectThe value of tmnxLogFilterParamsSubject is the log event subject
string to be matched. The subject is the entity that the event is
reported for, such as a port ID.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.12.7.1.11 |
tmnxLogFilterParamsSubjectOperatorThe value of tmnxLogFilterParamsSubjectOperator is the comparison
operator to use to determine if the log event matches the value
of tmnxLogFilterParamsSubject. The only valid values of
TmnxLogFilterOperator to use for the subject string comparison are
'off', 'equal', and 'notEqual'.rw TmnxLogFilterOperator .1.3.6.1.4.1.6527.3.1.2.12.7.1.12 |
tmnxLogFilterParamsSubjectRegexpThe value of tmnxLogFilterParamsSubjectRegexp specifies the type
of string comparison to use to determine if the log event matches
the value of tmnxLogFilterParamsSubject. When the value of
tmnxLogFilterParamsSubjectRegexp is 'true', the string in
tmnxLogFilterParamsSubject is a regular expression string to be
matched against the subject string in the log event being filtered.
When it has a value of 'false', the string in
tmnxLogFilterParamsSubject is matched exactly by the event
filter.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.12.7.1.13 |
tmnxLogFilterParamsRouterThe value of tmnxLogFilterParamsRouter is the log event router context
name string to be matched.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.12.7.1.14 |
tmnxLogFilterParamsRouterOperatorThe value of tmnxLogFilterParamsRouterOperator is the comparison
operator to use to determine if the log event matches the value
of tmnxLogFilterParamsRouter. The only valid values of
TmnxLogFilterOperator to use for the router name string comparison
are 'off', 'equal', and 'notEqual'.rw TmnxLogFilterOperator .1.3.6.1.4.1.6527.3.1.2.12.7.1.15 |
tmnxLogFilterParamsRouterRegexpThe value of tmnxLogFilterParamsRouterRegexp specifies the type
of string comparison to use to determine if the log event matches
the value of tmnxLogFilterParamsRouter. When the value of
tmnxLogFilterParamsRouterRegexp is 'true', the string in
tmnxLogFilterParamsRouter is a regular expression string to be
matched against the router name string in the log event being
filtered. When it has a value of 'false', the string in
tmnxLogFilterParamsRouter is matched exactly by the event
filter.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.12.7.1.16 |
tmnxLogFilterParamsMsgThe value of tmnxLogFilterParamsMsg specifies the log event message
string to be matched. Matching result is determined based on value of
tmnxLogFilterParamsMsgOperator. Matching type is determined based on
value of tmnxLogFilterParamsMsgRegexprw OCTET STRING .1.3.6.1.4.1.6527.3.1.2.12.7.1.17 |
tmnxLogFilterParamsMsgOperatorThe value of tmnxLogFilterParamsMsgOperator specifies the comparison
operator used to determine if the log event matches the value
of tmnxLogFilterParamsMsg. The only valid values of tmnxLogFilterParamsMsgOperator
to use for the string comparison are 'off', 'equal', and 'notEqual'.rw TmnxLogFilterOperator .1.3.6.1.4.1.6527.3.1.2.12.7.1.18 |
tmnxLogFilterParamsMsgRegexpThe value of tmnxLogFilterParamsMsgRegexp specifies the type
of string comparison to use to determine if the log event matches
the value of tmnxLogFilterParamsMsg. When the value of
tmnxLogFilterParamsMsgRegexp is 'true', the string in
tmnxLogFilterParamsMsg is a regular expression string to be
matched against the message string in the log event being filtered.
When it has a value of 'false', the string in
tmnxLogFilterParamsMsg is matched as substring by the event
filter.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.12.7.1.19 |
tmnxLogFilterParamsNameThe value of tmnxLogFilterParamsName specifies particular entry in the
tmnxLogFilterParamsTable.rw TLNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.12.7.1.20 |
tmnxSyslogTargetTableA table of all remote syslog collectors that this agent is configured
to send syslog messages to. SEQUENCE OF TmnxSyslogTargetEntry .1.3.6.1.4.1.6527.3.1.2.12.8 |
tmnxSyslogTargetEntryInformation about a particular Syslog Target entry.
Entries are created by user. Entries are deleted by user.
There is no StorageType object, entries have a presumed StorageType of
nonVolatile. TmnxSyslogTargetEntry .1.3.6.1.4.1.6527.3.1.2.12.8.1 |
tmnxSyslogTargetIndexThe value of tmnxSyslogTargetIndex is a unique arbitrary identifier
for this syslog collector target.
The maximum value of tmnxSyslogTargetIndex is limited to 10 for the
Base router context and to 30 for the VPRN context. TmnxSyslogId .1.3.6.1.4.1.6527.3.1.2.12.8.1.1 |
tmnxSyslogTargetRowStatusThe tmnxSyslogTargetRowStatus object allows for dynamic creation and
deletion of row entries in the tmnxSyslogTargetTable as well as the
activation and deactivation of these entries.
When this object's value is set to 'notInService (2)', no messages
will be sent to this target collector and none of its counters will be
incremented.
Refer to the RowStatus convention for further details on the behavior
of this object.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.12.8.1.2 |
tmnxSyslogTargetDescriptionThe value of tmnxSyslogTargetDescription is an administratively
assigned textual description of this syslog collector target.rw TItemDescription (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.12.8.1.3 |
tmnxSyslogTargetAddressThe value of tmnxSyslogTargetAddress is the IPv4 address for
this syslog message collector target. If the value of this
object is '0.0.0.0', then no messages will be sent, nor will
any counters be incremented.
This object was made obsolete in release 5.0. It is replaced
by the InetAddress pair tmnxSyslogTargetAddrType and
tmnxSyslogTargetAddr.rwobsolete IpAddress .1.3.6.1.4.1.6527.3.1.2.12.8.1.4 |
tmnxSyslogTargetUdpPortThe value of tmnxSyslogTargetUdpPort is the UDP port number that is
used to send messages to this syslog collector target.rw TmnxUdpPort .1.3.6.1.4.1.6527.3.1.2.12.8.1.5 |
tmnxSyslogTargetFacilityThe value of tmnxSyslogTargetFacility is the syslog facility number
that will be encoded in messages sent to this syslog collector target.rw TmnxSyslogFacility .1.3.6.1.4.1.6527.3.1.2.12.8.1.6 |
tmnxSyslogTargetSeverityThe value of tmnxSyslogTargetSeverity is the maximum severity level
of the messages that SHOULD be forwarded to this syslog collector
target. The higher the level, the lower the severity.rw TmnxSyslogSeverity .1.3.6.1.4.1.6527.3.1.2.12.8.1.7 |
tmnxSyslogTargetMessagePrefixThe value of tmnxSyslogTargetMessagePrefix is a string of ABNF
alphanumeric characters to be prepended as the MSG TAG to the syslog
MSG CONTENT string and separated from it with a colon and space, ': '.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.12.8.1.8 |
tmnxSyslogTargetMessagesDroppedThe value of tmnxSyslogTargetMessagesDropped is a count of messages
not sent to this syslog collector target because the severity level of
the message was above tmnxSyslogTargetSeverity; the higher the level,
the lower the severity.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.12.8.1.9 |
tmnxSyslogTargetAddrTypeThe value of tmnxSyslogTargetAddrType specifies the type of host
address to be used for the syslog message collector target. This
object indicates the type of address stored in the corresponding
tmnxSyslogTargetAddr object.
Only 'ipv4', 'ipv6', and 'ipv6z' address types are supported.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.12.8.1.10 |
tmnxSyslogTargetAddrThe value of tmnxSyslogTargetAddr specifies the IP host address
to be used for the syslog message collector target. If no address
is specified, ''H, then no messages will be sent nor will
any counters be incremented.
The syslog target address type is determined by the value of the
corresponding tmnxSyslogTargetAddrType object.rw InetAddress .1.3.6.1.4.1.6527.3.1.2.12.8.1.11 |
tmnxSyslogTargetNameThe value of tmnxSyslogTargetName specifies particular entry in the
tmnxSyslogTargetTable.rw TLNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.12.8.1.12 |
tmnxSyslogTlsClntProfileNameThe value of the object tmnxSyslogTlsClntProfileName specifies the
name for a TLS client profile. If configured, syslog uses TLS.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.12.8.1.13 |
tmnxSyslogHostnameThe value of the object tmnxSyslogHostname specifies manual Hostname
string which will be used in Syslog packets.rw TXLNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.12.8.1.14 |
tmnxSyslogHostnameUseSystemThe value of the object tmnxSyslogHostnameUseSystem is forcing usage
of configured system name as Hostname in Syslog packets.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.12.8.1.15 |
tmnxSyslogHostnameUseVprnThe value of the object tmnxSyslogHostnameUseVprn is forcing usage of
configured vprn name as Hostname in Syslog packets.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.12.8.1.16 |
tmnxSyslogTimestampFormatThe value of tmnxSyslogTimestampFormat specifies the syslog
timestamp-format.
The value millisecond is configured, then the timestamp in the syslog
messages for that particular syslog include 3 fractional second
digits.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.12.8.1.17 |
tmnxEventAppTableA table of all applications that generate TiMOS logger events. SEQUENCE OF TmnxEventAppEntry .1.3.6.1.4.1.6527.3.1.2.12.9 |
tmnxEventAppEntryInformation about a particular application entry.
Entries are created by the agent when the system initializes.
There is no StorageType object, entries have a presumed StorageType of
permanent. TmnxEventAppEntry .1.3.6.1.4.1.6527.3.1.2.12.9.1 |
tmnxEventAppIndexThe value of tmnxEventAppIndex is a unique arbitrary identifier for
this application event generator. Unsigned32 .1.3.6.1.4.1.6527.3.1.2.12.9.1.1 |
tmnxEventAppNameThe value of tmnxEventAppName is the name string that is used in TiMOS
log messages as the application that generated the logged event.ro TNamedItem (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.12.9.1.2 |
tmnxEventTableA table of all TiMOS events that can be generated. SEQUENCE OF TmnxEventEntry .1.3.6.1.4.1.6527.3.1.2.12.10 |
tmnxEventEntryInformation about a particular TiMOS event type entry. Entries are
created by the agent when the system initializes. There is no
StorageType object, entries have a presumed StorageType of permanent. TmnxEventEntry .1.3.6.1.4.1.6527.3.1.2.12.10.1 |
tmnxEventIDThe value of tmnxEventID is a unique arbitrary identifier for indexing
event type entries within an event generator application as identified
by the value of tmnxEventAppIndex. Unsigned32 .1.3.6.1.4.1.6527.3.1.2.12.10.1.1 |
tmnxEventNameThe value of tmnxEventName is a short name string used to describe
this event type.ro TNamedItem (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.12.10.1.2 |
tmnxEventSeverityThe value of tmnxEventSeverity specifies the severity level that will
be associated with this type of event when it is generated.rw TmnxPerceivedSeverity .1.3.6.1.4.1.6527.3.1.2.12.10.1.3 |
tmnxEventControlThe value of tmnxEventControl determines whether or not events
of this type will be generated or suppressed. When it has a value
of 'true', the event is generated and tmnxEventCounter is incremented.
When it has a value of 'false', the event is suppressed and
tmnxEventDropCount is incremented.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.12.10.1.4 |
tmnxEventCounterThe value of tmnxEventCounter is the number of times an event of this
type has been generated.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.12.10.1.5 |
tmnxEventDropCountThe value of tmnxEventDropCount is the number of times and event
of this type has been suppressed because tmnxEventControl is set to
'false'. When tmnxEventControl is set to 'true', tmnxEventDropCount
indicates the number of events dropped because of logger input
queue size overrun or dropped because of throttling when
tmnxEventThrottle is set to 'true'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.12.10.1.6 |
tmnxEventResetSetting tmnxEventReset to 'doAction (1)' causes the agent to reset the
values of tmnxEventSeverity and tmnxEventControl to the default values
for this event type.rw TmnxActionType (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.12.10.1.7 |
tmnxEventThrottleThe value of tmnxEventThrottle determines whether or not events
of this type will be throttled. When it has a value
of 'true', the event is throttled at the rate indicated by the
value of tmnxEventThrottleLimit and tmnxEventThrottleInterval.
When it has a value of 'false', no event throttling is applied.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.12.10.1.8 |
tmnxEventSpecThrottleThe value of tmnxEventSpecThrottle specifies if events of this type
will be throttled using the parameters specific for this event.
When the value of tmnxEventSpecThrottle is equal to 'true', the event
is throttled at the rate indicated by the value of
tmnxEventSpecThrottleLimit and tmnxEventSpecThrottleIntval.
When it has a value of 'false', no event-specific throttling is
applied.
The default value depends on the event.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.12.10.1.9 |
tmnxEventSpecThrottleLimitThe value of tmnxEventSpecThrottleLimit specifies the number of times
that this event can be logged within the tmnxEventSpecThrottleIntval.
Once this limit has been reached, any additional events of this type
will be dropped, i.e. tmnxEventDropCount will be incremented.
At the end of the specific throttle interval if any events have been
dropped a tmnxLogEventThrottled notification will be sent if the rate
is applied to the whole stream of log events of this type; otherwise,
if the rate is applied to each source of this type of event, the
TIMETRA-SYSTEM-MIB::tmnxTrapDropped will be sent.
The value must be zero while the value of tmnxEventSpecThrottle is
'false'.
The default value depends on the event type.rw Unsigned32 (0 | 1..20000) UNITS "events" .1.3.6.1.4.1.6527.3.1.2.12.10.1.10 |
tmnxEventSpecThrottleIntvalThe value of tmnxEventSpecThrottleIntval specifies the number of
seconds that the event-specific throttling interval lasts.
The value must be zero while the value of tmnxEventSpecThrottle is
'false'.
The default value depends on the event type.rw Unsigned32 (0 | 1..1200) UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.12.10.1.11 |
tmnxEventSpecThrottleDefThe value of tmnxEventSpecThrottleDef indicates the default value of
tmnxEventSpecThrottle.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.12.10.1.12 |
tmnxEventSpecThrottleLimitDefThe value of tmnxEventSpecThrottleLimitDef indicates the default value
of the object tmnxEventSpecThrottleLimit.
The value zero indicates that there is by default no event-specific
throttling for this event.ro Unsigned32 (0 | 1..20000) UNITS "events" .1.3.6.1.4.1.6527.3.1.2.12.10.1.13 |
tmnxEventSpecThrottleIntvalDefThe value of tmnxEventSpecThrottleIntvalDef indicates the default
value of tmnxEventSpecThrottleIntval.
The value zero indicates that there is by default no event-specific
throttling for this type of event.ro Unsigned32 (0 | 1..1200) UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.12.10.1.14 |
tmnxEventRepeatrepeatrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.12.10.1.15 |
tmnxSourceStreamThe value of tmnxSourceStream indicates from which stream is logger
event generated.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.12.10.1.16 |
tmnxSnmpTrapGroupTableA table of all remote SNMP trap collectors to which this agent is
configured to send SNMP notifications messages.
This table was made obsolete in the 5.0 release and is replaced with
tmnxSnmpTrapDestTable.obsolete SEQUENCE OF TmnxSnmpTrapGroupEntry .1.3.6.1.4.1.6527.3.1.2.12.11 |
tmnxSnmpTrapGroupEntryInformation about a particular SNMP trap destination entry. The first
index instance creates and snmp trap group to be associated with the
event log with the same value for tmnxLogIdIndex. The second and third
indexes specify a remote SNMP trap destination that will be sent SNMP
notification messages from the associated event log.
Entries are created by user. Entries are deleted by user.
There is no StorageType object, entries have a presumed StorageType of
nonVolatile.
This table was made obsolete in the 5.0 release and is replaced with
the tmnxSnmpTrapDestTable.obsolete TmnxSnmpTrapGroupEntry .1.3.6.1.4.1.6527.3.1.2.12.11.1 |
tmnxStgIndexThe value of tmnxStgIndex specifies an snmp trap group to be
associated with the event log with the same value for tmnxLogIdIndex.
This object was made obsolete in the 5.0 release. It is
replaced by tmnxStdIndex.obsolete TmnxStgIndex .1.3.6.1.4.1.6527.3.1.2.12.11.1.1 |
tmnxStgDestAddressThe value of tmnxStgDestAddress is the IPv4 address for
this remote snmp notification destination. If the value of this
object is '0.0.0.0', then no messages will be sent, nor will
any counters be incremented.
This object was made obsolete in the 5.0 release. It is
replaced by the InetAddressType/InetAddress objects
tmnxStdDestAddrType and tmnxStdDestAddr.obsolete IpAddress .1.3.6.1.4.1.6527.3.1.2.12.11.1.2 |
tmnxStgDestPortThe value of tmnxStgDestPort is the UDP port number that is used to
send messages to this remote SNMP notification destination.
This object was made obsolete in the 5.0 release. It is
replaced by tmnxStdDestPort.obsolete TmnxUdpPort .1.3.6.1.4.1.6527.3.1.2.12.11.1.3 |
tmnxStgRowStatusThe tmnxStgRowStatus object allows for dynamic creation and deletion
of row entries in the tmnxSnmpTrapGroupTable as well as the activation
and deactivation of these entries.
When this object's value is set to 'notInService (2)', no messages
will be sent to this snmp trap group and none of its counters will be
incremented.
Refer to the RowStatus convention for further details on the behavior
of this object.
This object was made obsolete in the 5.0 release. It is
replaced by tmnxStdRowStatus.rwobsolete RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.12.11.1.4 |
tmnxStgDescriptionThe value of tmnxStgDescription is an administratively assigned
textual description of this snmp trap destination.
This object was made obsolete in the 5.0 release. It is
replaced by tmnxStdDescription.rwobsolete TItemDescription (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.12.11.1.5 |
tmnxStgVersionThe value of tmnxStgVersion specifies the SNMP version that will be
used to format notification messages sent to this snmp trap
destination.
The values supported by the Nokia SROS series SNMP agent are:
0 for SNMPv1
1 for SNMPv2c
3 for SNMPv3
This object was made obsolete in the 5.0 release. It is
replaced by tmnxStdVersion.rwobsolete SnmpMessageProcessingModel (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.6527.3.1.2.12.11.1.6 |
tmnxStgNotifyCommunityThe value of tmnxStgNotifyCommunity specifies the SNMPv1 or
SNMPv2c community name string or the SNMPv3 security name
used when an SNMP notification message is sent to this
trap destination. If the value of this object is the empty
string, then no messages will be sent nor will any counters be
incremented.
This object was made obsolete in the 5.0 release. It is
replaced by tmnxStdVersion.rwobsolete OCTET STRING .1.3.6.1.4.1.6527.3.1.2.12.11.1.7 |
tmnxStgSecurityLevelThe value of tmnxStgSecurityLevel specifies the level of security at
which SNMP notification messages will be sent to the SNMP trap
destination when tmnxStgVersion has a value of '3' for SNMPv3.
This object was made obsolete in the 5.0 release. It is
replaced by tmnxStdSecurityLevel.rwobsolete SnmpSecurityLevel (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.6527.3.1.2.12.11.1.8 |
tmnxEventTestSetting tmnxEventTest to 'doAction' causes the tmnxTestEvent
notification to be generated.rw TmnxActionType (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.12.12 |
tmnxEventThrottleLimitThe value of tmnxEventThrottleLimit specifies the number of
log events that can be logged within the tmnxEventThrottleInterval
for a specific entry in the tmnxEventTable. Once the limit has
been reached, any additional events of that type will be dropped,
i.e. tmnxEventDropCount will be incremented. At the end of the
throttle interval if any events have been dropped a
tmnxLogEventThrottled notification will be sent.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.12.13 |
tmnxEventThrottleIntervalThe value of tmnxEventThrottleInterval specifies the number of seconds
that an event throttling interval lasts.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.12.14 |
tmnxSnmpSetErrsMaxThe value of tmnxSnmpSetErrsMax indicates the maximum number of
entries the agent will create in the tmnxSnmpSetErrsTable. Once the
table is full the agent will delete the oldest entry in the table in
order to add new entries.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.12.15 |
tmnxSnmpSetErrsTableA table of recent SNMP SET failures. Only the SET errs from
remote SNMP manager requests are saved in this table. Only
SET errs detected by the SNMP engine in the test phase
consistency check method functions are saved. SET errors that
are caught by the preliminary access and ASN.1 decoding phase
are not saved. These are errs such as noAccess, notWritable,
wrongType, wrongLength and wrongEncoding. Note that notWritable,
wrongType, and wrongLength errs may sometimes be generated by
the consistency check; in this case they will be saved in this
table.
SET errs caused by local CLI sessions are not saved.
The tmnxSnmpSetErrsTable is intended to provide an aide to
Network Management Systems (NMS) developers. When an SNMP SET
fails during the consistency checking test phase, this table may
provide more detailed failure reason information than the simple
SNMP error code value in the SNMP response PDU. SEQUENCE OF TmnxSnmpSetErrsEntry .1.3.6.1.4.1.6527.3.1.2.12.16 |
tmnxSnmpSetErrsEntryInformation about a particular SNMP SET error. The first two
index instances identify the SNMP manager who sent the SNMP SET
request that failed. The third index specifies the SNMP request ID
(sequence number) of the SNMP SET request that failed.
Entries are created by the agent. Entries are deleted by the agent.
There is no StorageType object, entries have a presumed StorageType of
volatile. TmnxSnmpSetErrsEntry .1.3.6.1.4.1.6527.3.1.2.12.16.1 |
tmnxSseAddressTypeThe value of tmnxSseAddressType indicates the IP address
type of address specified in tmnxSseAddress. 'ipv4' and
'ipv6' are the only address type values supported. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.12.16.1.1 |
tmnxSseAddressThe value of tmnxSseAddress is the IP address of the SNMP manager that
sent the SNMP SET request that failed for this error reason. InetAddress .1.3.6.1.4.1.6527.3.1.2.12.16.1.2 |
tmnxSseSnmpPortThe value of tmnxSseSnmpPort is the UDP port number of the SNMP
manager that sent the SNMP SET request that failed for this error
reason. TmnxUdpPort .1.3.6.1.4.1.6527.3.1.2.12.16.1.3 |
tmnxSseRequestIdThe value of tmnxSseRequestId indicates the request ID of the SNMP
SNMP SET request that failed for this error reason. Unsigned32 .1.3.6.1.4.1.6527.3.1.2.12.16.1.4 |
tmnxSseVersionThe value of tmnxSseVersion indicates the SNMP version of the SNMP SET
request that failed.
The values supported by the Nokia SROS series SNMP agent are:
0 for SNMPv1
1 for SNMPv2c
3 for SNMPv3ro SnmpMessageProcessingModel (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.6527.3.1.2.12.16.1.5 |
tmnxSseSeverityLevelThe value of tmnxSseSeverityLevel indicates severity level that is
associated with this type SNMP SET error.ro TmnxSnmpSetErrsSeverity .1.3.6.1.4.1.6527.3.1.2.12.16.1.6 |
tmnxSseModuleIdThe value of tmnxSseModuleId indicates a unique arbitrary
identified for the TiMOS application module that generated
this SNMP SET error. NOTE: This is NOT the same value used
for tmnxEventAppIndex.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.12.16.1.7 |
tmnxSseModuleNameThe value of tmnxSseModuleName indicates the name string of the TiMOS
application module that generated this SNMP SET error. NOTE: This is
NOT the same value used for tmnxEventAppName.ro TNamedItem (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.12.16.1.8 |
tmnxSseErrorCodeThe value of tmnxSseErrorCode indicates the error number associated
with this SNMP SET error. The error numbers are unique within
a tmnxSseModuleId. They are not unique across all modules so
both the module name and error number are required to identify
a particular error message.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.12.16.1.9 |
tmnxSseErrorNameThe value of tmnxSseErrorName indicates the error name associated
with this SNMP SET error. The error names are unique within
a tmnxSseModuleId. They are not unique across all modules so
both the module name and error name are required to identify
a particular error message.ro DisplayString .1.3.6.1.4.1.6527.3.1.2.12.16.1.10 |
tmnxSseErrorMsgThe value of tmnxSseErrorMsg indicates the fixed error message text
associated with this SNMP SET error identified by the values of
tmnxSseModuleId and tmnxSseErrorCode.ro DisplayString .1.3.6.1.4.1.6527.3.1.2.12.16.1.11 |
tmnxSseExtraTextThe value of tmnxSseExtraText indicates the fixed run-time variable
message text associated with this SNMP SET error identified by the
values of tmnxSseModuleId and tmnxSseErrorCode. If the extra text
was truncated to fit into buffer size allowed, the last character
will be an asterisk (*).ro OCTET STRING .1.3.6.1.4.1.6527.3.1.2.12.16.1.12 |
tmnxSseTimestampThe value of tmnxSseTimestamp indicates the sysUpTime value when this
tmnxSnmpSetErrsEntry was created by the agent.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.12.16.1.13 |
tmnxSnmpTrapLogTableA table of all remote SNMP trap logs to which this agent is configured
to send SNMP notifications messages. SEQUENCE OF TmnxSnmpTrapLogEntry .1.3.6.1.4.1.6527.3.1.2.12.17 |
tmnxSnmpTrapLogEntryEach row entry in the tmnxSnmpTrapLogTable represents additional
columns for attributes specific to the Nokia SROS series
implementation of SNMP-NOTIFICATION-MIB::snmpNotifyTable. TmnxSnmpTrapLogEntry .1.3.6.1.4.1.6527.3.1.2.12.17.1 |
tmnxSnmpTrapLogDescriptionThe value of tmnxSnmpTrapLogDescription is an administratively
assigned textual description of this snmp trap log.rw TItemDescription (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.12.17.1.1 |
snmpNotifyIdThe value of snmpNotifyId creates association with log with the same
value of tmnxLogIdIndex. It is number representation of
snmpNotifyName. Usage of default Netconf log 101 not allowed.rw TmnxLogIdIndex .1.3.6.1.4.1.6527.3.1.2.12.17.1.2 |
tmnxSnmpTrapDestTableA table of all remote SNMP IPv4/v6 trap collectors to which this agent
is configured to send SNMP notification messages. SEQUENCE OF TmnxSnmpTrapDestEntry .1.3.6.1.4.1.6527.3.1.2.12.18 |
tmnxSnmpTrapDestEntryInformation about a particular SNMP notification destination entry.
The first index instance creates an snmp notification group to be
associated with the event log with the same value for tmnxLogIdIndex.
The second index specifies an administrative name to identify a
specific SNMP notification target.
Entries are created by user. Entries are deleted by user.
There is no StorageType object, entries have a presumed StorageType of
nonVolatile. TmnxSnmpTrapDestEntry .1.3.6.1.4.1.6527.3.1.2.12.18.1 |
tmnxStdIndexThe value of tmnxStdIndex specifies an snmp notification group to be
associated with the event log with the same value for tmnxLogIdIndex. TmnxStgIndex .1.3.6.1.4.1.6527.3.1.2.12.18.1.1 |
tmnxStdNameThe value of tmnxStdName specifies the name of an snmp notification
destination within the snmp notification group specified by
tmnxLogIdIndex. SnmpAdminString .1.3.6.1.4.1.6527.3.1.2.12.18.1.2 |
tmnxStdRowStatusThe tmnxStdRowStatus object allows for dynamic creation and deletion
of row entries in the tmnxSnmpTrapDestTable as well as the activation
and deactivation of these entries.
In order for 'createAndGo' row creation to succeed or status to
transition to 'active' a value must be set for tmnxStdNotifyCommunity.
In order for 'createAndGo' row creation to succeed or status to
transition to 'active' an entry must exist in the
SNMP-NOTIFICATION-MIB::snmpNotifyTable with an snmpNotifyName index
that is the ASCII string representation of the value of tmnxStdIndex.
When this object's value is set to 'notInService (2)', no messages
will be sent to this snmp notification collector and none of its
counters will be incremented.
Refer to the RowStatus convention for further details on the behavior
of this object.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.12.18.1.3 |
tmnxStdRowLastChangedThe value of tmnxStdRowLastChanged indicates the sysUpTime when the
value of a writable object in this row entry was modified.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.12.18.1.4 |
tmnxStdDestAddrTypeThe value of tmnxStdDestAddrType specifies the type of
host address to be used for the remote SNMP notification
collector. This object indicates the type of address stored
in the corresponding tmnxStdDestAddr object.
If the value of this object is 'unknown', then no messages will be
sent nor will any counters be incremented.
If tmnxStdDestAddrType is not set in the same PDU with
tmnxStdDestAddr, the set request will fail with an inconsistentValue
error.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.12.18.1.5 |
tmnxStdDestAddrThe value of tmnxStdDestAddr specifies the IP host address to be used
for the remote SNMP notification collector.
The SNMP notification collector IP address type is determined by the
value of the corresponding tmnxStdDestAddrType object.
If the value of this object is empty or all NULLs, then no messages
will be sent nor will any counters be incremented.
If tmnxStdDestAddrType is not set in the same PDU with
tmnxStdDestAddr, the set request will fail with an inconsistentValue
error.rw InetAddress .1.3.6.1.4.1.6527.3.1.2.12.18.1.6 |
tmnxStdDestPortThe value of tmnxStdDestPort is the UDP port number that is used to
send messages to this remote SNMP notification collector.rw TmnxUdpPort .1.3.6.1.4.1.6527.3.1.2.12.18.1.7 |
tmnxStdDescriptionThe value of tmnxStdDescription is an administratively assigned
textual description of this SNMP notification collector.rw TItemDescription (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.12.18.1.8 |
tmnxStdVersionThe value of tmnxStdVersion specifies the SNMP version that will be
used to format notification messages sent to this SNMP notification
collector.
The values supported by the Nokia SROS series SNMP agent are:
0 for SNMPv1
1 for SNMPv2c
3 for SNMPv3rw SnmpMessageProcessingModel (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.6527.3.1.2.12.18.1.9 |
tmnxStdNotifyCommunityThe value of tmnxStdNotifyCommunity specifies the SNMPv1 or
SNMPv2c community name string or the SNMPv3 security name
used when an SNMP notification message is sent to this
SNMP notification collector. If the value of this object is
the empty string, then no messages will be sent nor will any
counters be incremented.rw OCTET STRING .1.3.6.1.4.1.6527.3.1.2.12.18.1.10 |
tmnxStdSecurityLevelThe value of tmnxStdSecurityLevel specifies the level of security at
which SNMP notification messages will be sent to the SNMP notification
collector when tmnxStdVersion has a value of '3' for SNMPv3.rw SnmpSecurityLevel (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.6527.3.1.2.12.18.1.11 |
tmnxStdReplayThe value of tmnxStdReplay specifies whether or not to resend
notifications that were generated while this notification destination
did not have a route installed for it in the route tables.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.12.18.1.12 |
tmnxStdReplayStartThe value of tmnxStdReplayStart indicates the SNMP notification
request ID of the first event that could not be generated because
there is no route to this notification target address.
Events will be resent when this notification target address is
readded to the route tables, on either an in-band or out-of-band
interface. The agent searches backwards in the event log and
begins resending events from the oldest event that has a timestamp
<= 5 centiseconds less than the timestamp of the
event with this request ID. Note that if the outage is long
and a large number of events are generated in the meantime,
it is possible that the log memory storage has wrapped and the
event data for this request ID is no longer available. In that case,
the oldest event saved in the log will be the first event resent.
A value of 0 indicates that there are no missed events waiting to be
resent.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.12.18.1.13 |
tmnxStdReplayLastTimeThe value of tmnxStdReplayLastTime indicates the sysUpTime when
missed events were last replayed to this SNMP notification target
address. A value of 0 indicates that no missed events have been
replayed to this SNMP notification target address.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.12.18.1.14 |
tmnxStdDyingGaspThe value of tmnxStdDyingGasp specifies whether the tmnxSysDyingGasp
trap message is to be sent using this SNMP notification target when
the system goes down due to power loss.
tmnxStdDyingGasp can only be set to 'true' on at most 3 SNMP
notification targets.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.12.18.1.15 |
tmnxStdMaxTargetsThe maximum number of tmnxSnmpTrapDestTable row entries that can be
created for a specific tmnxStdIndex that represents an snmp
notification group.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.12.19 |
tmnxLogApCustRecordTableThe Nokia SROS series tmnxLogApCustRecordTable augments
tmnxLogApTable. The table allows to configure the layout and setting
for a custom accounting record associated with this accounting policy. SEQUENCE OF TmnxLogApCustRecordEntry .1.3.6.1.4.1.6527.3.1.2.12.20 |
tmnxLogApCustRecordEntryDefines an entry in the tmnxLogApCustRecordTable. Entries in this
table are created and destroyed via SNMP Set requests to the
tmnxLogApRowStatus object of the tmnxLogApTable. TmnxLogApCustRecordEntry .1.3.6.1.4.1.6527.3.1.2.12.20.1 |
tmnxLogApCrLastChangedThe value of tmnxLogApCrLastChanged indicates the sysUpTime when an
object in this table was last modified. A Value 0 means that no change
was made to this row since the box was last initialized.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.12.20.1.1 |
tmnxLogApCrSignChangeDeltaThe value of tmnxLogApCrSignChangeDelta specifies the delta
change (significant change) that is required for the custom record
to be written to the xml file.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.12.20.1.2 |
tmnxLogApCrSignChangeQueueThe value of tmnxLogApCrSignChangeQueue specifies the reference queue
to which the significant change defined in tmnxLogApCrSignChangeDelta
applies.rw TQueueIdOrAll (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.12.20.1.3 |
tmnxLogApCrSignChangeQICountersThe value of tmnxLogApCrSignChangeQICounters specifies the ingress
counter Ids in the queue defined by tmnxLogApCrSignChangeQueue to be
taken as reference to which the significant change defined in
tmnxLogApCrSignChangeDelta applies.
A non-zero value of this object is only allowed if the object
tmnxLogApCrSignChangeQueue has a non-zero value.rw TmnxAccPlcyQICounters (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.12.20.1.5 |
tmnxLogApCrSignChangeQECountersThe value of tmnxLogApCrSignChangeQECounters specifies the egress
counter Ids in the queue defined by tmnxLogApCrSignChangeQueue to be
taken as reference to which the significant change defined in
tmnxLogApCrSignChangeDelta applies.
A non-zero value of this object is only allowed if the object
tmnxLogApCrSignChangeQueue has a non-zero value.rw TmnxAccPlcyQECounters (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.12.20.1.6 |
tmnxLogApCrSignChangeAACountersThe value of tmnxLogApCrSignChangeAACounters specifies the
AA (Application assurance) counter Ids to be taken as reference to
which the significant change defined in tmnxLogApCrSignChangeDelta
applies.
Also, a non-zero value for this object is only allowed if the object
tmnxLogApCrSignChangeDelta is either 0 or 1.rw TmnxAccPlcyAACounters (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.12.20.1.9 |
tmnxLogApCrAACountersThe value of tmnxLogApCrAACounters specifies the list of AA
(Application Assurance) counters that need to be collected in this
custom record.rw TmnxAccPlcyAACounters (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.12.20.1.10 |
tmnxLogApCrAASubAttributesThe value of tmnxLogApCrAASubAttributes specifies the list of AA
(Application Assurance) subscriber attributes that must be included in
this custom record.rw TmnxAccPlcyAASubAttributes (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.12.20.1.11 |
tmnxLogApCrSignChangePolicerThe value of tmnxLogApCrSignChangePolicer specifies the reference
policer to which the significant change defined in
tmnxLogApCrSignChangeDelta applies.
A value of zero means that the significant change does not apply to
any policer.
A value of minus one means that the significant change applies to any
policer.rw Integer32 (-1 | 0..63) .1.3.6.1.4.1.6527.3.1.2.12.20.1.12 |
tmnxLogApCrSignChangePICountersThe value of tmnxLogApCrSignChangePICounters specifies the ingress
counters in the policer defined by tmnxLogApCrSignChangePolicer to
which the significant change defined in tmnxLogApCrSignChangeDelta
applies.
A non-empty value of this object is only allowed if the object
tmnxLogApCrSignChangePolicer has a non-zero value.rw TmnxAccPlcyPolicerICounters .1.3.6.1.4.1.6527.3.1.2.12.20.1.13 |
tmnxLogApCrSignChangePECountersThe value of tmnxLogApCrSignChangePECounters specifies the egress
counters in the policer defined by tmnxLogApCrSignChangePolicer to
which the significant change defined in tmnxLogApCrSignChangeDelta
applies.
A non-empty value of this object is only allowed if the object
tmnxLogApCrSignChangeQueue has a non-zero value.rw TmnxAccPlcyPolicerECounters .1.3.6.1.4.1.6527.3.1.2.12.20.1.14 |
tmnxLogApCustRecordQueueTableThe Nokia SROS series tmnxLogApCustRecordQueueTable allows to create
custom record queue information for a given accounting policy. Rows
can only be created for existing accounting policies (as defined in
tmnxLogApTable). SEQUENCE OF TmnxLogApCustRecordQueueEntry .1.3.6.1.4.1.6527.3.1.2.12.21 |
tmnxLogApCustRecordQueueEntryDefines an entry in the tmnxLogApCustRecordQueueTable. Entries in this
table are created and destroyed via SNMP Set requests. TmnxLogApCustRecordQueueEntry .1.3.6.1.4.1.6527.3.1.2.12.21.1 |
tmnxLogApCrQueueIdThe value of tmnxLogApCrQueueId specifies the queue ID for which
counters will be collected in this custom record. The counters that
will be collected are defined in tmnxLogApCrQueueICounters and
tmnxLogApCrQueueECounters. TQueueId .1.3.6.1.4.1.6527.3.1.2.12.21.1.1 |
tmnxLogApCrQueueRowStatusRow Status of the entry. This allows creation/deletion of rows in this
table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.12.21.1.2 |
tmnxLogApCrQueueLastChangedThe value of tmnxLogApCrQueueLastChanged indicates the sysUpTime when
an object in this table was last modified. A Value 0 means that no
change was made to this row since it was created.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.12.21.1.3 |
tmnxLogApCrQueueICountersThe value of tmnxLogApCrQueueICounters specifies the list of ingress
counters that need to be collected in this custom record.
At least one of the objects tmnxLogApCrQueueICounters or
tmnxLogApCrQueueECounters must have a non-zero value.rw TmnxAccPlcyQICounters (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.12.21.1.4 |
tmnxLogApCrQueueECountersThe value of tmnxLogApCrQueueECounters specifies the list of egress
counters that need to be collected in this custom record.
At least one of the objects tmnxLogApCrQueueICounters or
tmnxLogApCrQueueECounters must have a non-zero value.rw TmnxAccPlcyQECounters (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.12.21.1.5 |
tmnxEventPrimaryRoutePrefThe value of tmnxEventPrimaryRoutePref specifies the primary routing
preference for traffic generated for SNMP notifications and syslog
messages.
A value of 'inband' specifies that the Logging utility will attempt to
use the Base routing context to send SNMP notifications and syslog
messages to remote destinations.
A value of 'outband' specifies that the Logging utility will attempt
to use the management routing context to send SNMP notifications and
syslog messages to remote destinations.
If the remote destination, as specified by tmnxStdDestAddr or
tmnxSyslogTargetAddr, is not reachable via the routing context
specified by tmnxEventPrimaryRoutePref, the secondary routing
preference as specified by tmnxEventSecondaryRoutePref will be
attempted.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.12.23 |
tmnxEventSecondaryRoutePrefThe value of tmnxEventSecondaryRoutePref specifies the secondary
routing preference for traffic generated for SNMP notifications and
syslog messages. The routing context specified by the
tmnxEventSecondaryRoutePref will be attempted if the remote
destination was not reachable by the primary routing preference,
specified by tmnxEventPrimaryRoutePref. The value specified for
tmnxEventSecondaryRoutePref must be distinct from the value for
tmnxEventPrimaryRoutePref.
A value of 'inband' specifies that the Logging utility will attempt to
use the Base routing context to send SNMP notifications and syslog
messages to remote destinations.
A value of 'outband' specifies that the Logging utility will attempt
to use the management routing context to send SNMP notifications and
syslog messages to remote destinations.
A value of 'none' specifies that no attempt will be made to send SNMP
notifications and syslog messages to remote destinations.
If the remote destination, as specified by tmnxStdDestAddr or
tmnxSyslogTargetAddr, is not reachable via the routing contexts
specified by tmnxEventPrimaryRoutePref and
tmnxEventSecondaryRoutePref, the Log utility will fail to send SNMP
notifications and syslog messages to the remote destination.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.12.24 |
tmnxLogConfigEventsDampedThe value of tmnxLogConfigEventsDamped specifies whether or not the
module generating tmnxConfigCreate, tmnxConfigDelete, and
tmnxConfigModify events applies a damping algorithm.
WARNING: While this event damping is original behavior
for some modules such as service manager, QoS, and filters it
can result in the NMS system database being out of sync because
of missed change events. On the other hand, if the damping
is disabled, 'false', it may take much longer for a large
CLI configuration file to be processed by CLI command 'exec'
after system bootup.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.12.25 |
tmnxLogEventHistoryObjs OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.12.26 |
tmnxLogEventHistGeneralObjs OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.12.26.1 |
tmnxLogExRbkOpTblLastChangeThe value of the object tmnxLogExRbkOpTblLastChange indicates the
value of sysUpTime at the time of the last modification of a row entry
in the tmnxLogExecRollbackOpTable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.12.26.1.1 |
tmnxLogExRbkOpMaxEntriesThe value of the object tmnxLogExRbkOpMaxEntries specifies the maximum
number of row entries supported in the tmnxLogExecRollbackOpTable.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.12.26.1.2 |
tmnxLogExecRollbackOpTableThe Nokia SROS series tmnxLogExecRollbackOpTable provides a history of
up to the last number of 'exec', 'load', rollback revert, and 'vsd'
operations specified by the value of tmnxLogExRbkOpMaxEntries.
The tmnxLogExecRollbackOpTable is intended to provide an aide to
Network Management Systems (NMS). The 'exec' or 'load' of a large
configuration file via the system's CLI, a large rollback revert
operation, or execution of 'vsd' configuration messages will generate
so many configuration change and other events in a short time that
neither the SROS's event logging utility nor the NMS can keep up with
them. This results in the SROS and/or NMS dropping events and requires
the NMS to perform a costly resynchronization of its management
database. SEQUENCE OF TmnxLogExecRollbackOpEntry .1.3.6.1.4.1.6527.3.1.2.12.26.3 |
tmnxLogExecRollbackOpEntryDefines a row entry in the tmnxLogExecRollbackOpTable. Entries in this
table are created and deleted by the agent. TmnxLogExecRollbackOpEntry .1.3.6.1.4.1.6527.3.1.2.12.26.3.1 |
tmnxLogExRbkOpIndexThe value of tmnxLogExRbkOpIndex is a unique value that indicates an
instance of an exec, load, rollback revert, or vsd operation. Only the
most recent instances are kept in this table. The maximum number of
row entries supported in this table is specified by the value of
tmnxLogExRbkOpMaxEntries. Unsigned32 .1.3.6.1.4.1.6527.3.1.2.12.26.3.1.1 |
tmnxLogExRbkOpLastChangedThe value of tmnxLogExRbkOpLastChanged indicates the sysUpTime when an
object in this table was last modified. A Value 0 means that no change
was made to this row since it was created.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.12.26.3.1.2 |
tmnxLogExRbkOpTypeThe value of tmnxLogExRbkOpType indicates the type of operation this
row entry represents.ro TmnxLogExRbkOperationType .1.3.6.1.4.1.6527.3.1.2.12.26.3.1.3 |
tmnxLogExRbkOpStatusThe value of tmnxLogExRbkOpStatus indicates the status of this exec,
load, rollback revert, or vsd operation.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.12.26.3.1.4 |
tmnxLogExRbkOpBeginThe value of tmnxLogExRbkOpBegin indicates the sysUpTime when the
exec, load, rollback revert, or vsd operation began.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.12.26.3.1.5 |
tmnxLogExRbkOpEndThe value of tmnxLogExRbkOpEnd indicates the sysUpTime when the exec,
load, rollback revert, or vsd operation ended. A value of zero (0)
means that the operation has not completed.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.12.26.3.1.6 |
tmnxLogExRbkOpFileThe value of tmnxLogExRbkOpFile indicates the location and name of the
file used for the exec, load or rollback revert operation, otherwise
the value of this object is an empty string.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.12.26.3.1.7 |
tmnxLogExRbkOpUserThe value of tmnxLogExRbkOpUser indicates the user who initiated the
exec or rollback revert operation.ro TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.12.26.3.1.8 |
tmnxLogExRbkOpNumEventsThe value of tmnxLogExRbkOpNumEvents indicates the number of
row entries in the associated tmnxLogExecRollbackEventTable
for this exec, load, rollback revert, or vsd operation.
It is updated only when the exec, load, rollback revert, or vsd
operation ends. A value of zero (0) means that the operation
has not completed.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.12.26.3.1.9 |
tmnxLogExecRollbackEventTableThe Nokia SROS series tmnxLogExecRollbackEventTable provides a history
of mib tables modified or specific events generated during an exec,
load, rollback revert, or vsd operation. SEQUENCE OF TmnxLogExecRollbackEventEntry .1.3.6.1.4.1.6527.3.1.2.12.26.4 |
tmnxLogExecRollbackEventEntryDefines a row entry in the tmnxLogExecRollbackEventTable. Each row
entry represents either an SNMP table that has been modified or a
specific event generated during an exec, load, rollback revert, or vsd
operation. Entries in this table are created and deleted by the agent. TmnxLogExecRollbackEventEntry .1.3.6.1.4.1.6527.3.1.2.12.26.4.1 |
tmnxLogExRbkEventIndexThe value of tmnxLogExRbkEventIndex is a unique value that indicates
an instance of an event generated during an exec, load, rollback
revert, or vsd operation. Unsigned32 .1.3.6.1.4.1.6527.3.1.2.12.26.4.1.1 |
tmnxLogExRbkEventOIDThe value of tmnxLogExRbkEventOID indicates the object identifier of
either a mib table for which a generic change event was generated or
the notification object identifier of a specific event notification
generated during the the exec, load, rollback revert, or vsd
operation.
The generic change events are tmnxConfigCreate, tmnxConfigDelete,
tmnxConfigModify, and tmnxStateChange notifications. For these
event types, the value of tmnxLogExRbkEventOID is the object
identifier specified by the tmnxNotifyEntryOID varbind.
For specific events generated during an exec, load or rollback revert
or vsd, the value of this object is the notification object identifier
itself.
An object identifier will appear only once in this table.ro OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.12.26.4.1.2 |
tmnxLogExRbkNotifyObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.12.26.5 |
tmnxLogExecRollbackOpIndexThe value of tmnxLogExecRollbackOpIndex is a unique value that
indicates a row entry instance of an exec, load, rollback revert,
or vsd operation in the tmnxLogExecRollbackOpTable. It is included
in the 'exec', 'load' and rollback revert start and end notifications.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.12.26.5.1 |
tmnxLogExecRollbackOpTypeThe value of tmnxLogExecRollbackOpType indicates the type of
operation being performed. It is included in the 'exec', 'load'
and rollback revert start and end notifications.ro TmnxLogExRbkOperationType .1.3.6.1.4.1.6527.3.1.2.12.26.5.2 |
tmnxLogColdStartWaitTimeThe value of tmnxLogColdStartWaitTime specifies the time delay that
must pass before notifying specific CPM applications that a route is
available after a cold reboot.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.12.27 |
tmnxLogRouteRecoveryWaitTimeThe value of tmnxLogRouteRecoveryWaitTime specifies the time delay
that must pass before notifying specific CPM applications after the
recovery or change of a route during normal operation.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.12.28 |
tmnxEhsObjs OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.12.29 |
tmnxEhsGeneralObjs OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.12.29.1 |
tmnxEhsHandlerTblLastChangeThe value of the object tmnxEhsHandlerTblLastChange indicates the
value of sysUpTime at the time of the last modification of a row in
the tmnxEhsHandlerTable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.12.29.1.1 |
tmnxEhsHandlerMaxEntriesThe value of the object tmnxEhsHandlerMaxEntries specifies the maximum
number of row entries supported in the tmnxEhsHandlerTable.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.12.29.1.2 |
tmnxEhsHEntryTblLastChangeThe value of the object tmnxEhsHEntryTblLastChange indicates the value
of sysUpTime at the time of the last modification of a row in the
tmnxEhsHEntryTable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.12.29.1.3 |
tmnxEhsHEntryMaxEntriesThe value of the object tmnxEhsHEntryMaxEntries specifies the maximum
number of row entries supported in the tmnxEhsHEntryTable.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.12.29.1.4 |
tmnxEhsTriggerTblLastChangeThe value of the object tmnxEhsTriggerTblLastChange indicates the
value of sysUpTime at the time of the last modification of a row in
the tmnxEhsTriggerTable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.12.29.1.5 |
tmnxEhsTriggerMaxEntriesThe value of the object tmnxEhsTriggerMaxEntries specifies the maximum
number of rows supported in the tmnxEhsTriggerTable.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.12.29.1.6 |
tmnxEhsTEntryTblLastChangeThe value of the object tmnxEhsTEntryTblLastChange indicates the value
of sysUpTime at the time of the last modification of a row entry in
the tmnxEhsTEntryTable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.12.29.1.7 |
tmnxEhsTEntryMaxEntriesThe value of the object tmnxEhsTEntryMaxEntries specifies the maximum
number of row entries supported in the tmnxEhsTEntryTable.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.12.29.1.8 |
tmnxEhsHandlerTableThe tmnxEhsHandlerTable contains a list of Event Handlers used by the
Event Handling System (EHS) Event Triggers. SEQUENCE OF TmnxEhsHandlerEntry .1.3.6.1.4.1.6527.3.1.2.12.29.2 |
tmnxEhsHandlerEntryDefines a row entry in the tmnxEhsHandlerTable. Each entry
contains information about a specific Event Handling System (EHS)
Event Handler.
Rows are created and deleted via SNMP SET operations using
tmnxEhsHandlerRowStatus. TmnxEhsHandlerEntry .1.3.6.1.4.1.6527.3.1.2.12.29.2.1 |
tmnxEhsHandlerNameThe value of tmnxEhsHandlerName specifies the name of an Event
Handling System (EHS) Event Handler represented by this row in the
tmnxEhsHandlerTable. TNamedItem (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.12.29.2.1.1 |
tmnxEhsHandlerRowStatusThe value of tmnxEhsHandlerRowStatus specifies
the row status. It allows rows to be created
and deleted in the tmnxEhsHandlerTable.
If any associated rows exist in the tmnxEhsHEntryTable,
'destroy' will fail. All associated rows must be
destroyed first.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.12.29.2.1.2 |
tmnxEhsHandlerDescriptionThe value of tmnxEhsHandlerDescription specifies a user provided
description string for an EHS Handler. It can consist of any
printable, seven-bit ASCII characters up to 80 characters in length.rw TItemDescription (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.12.29.2.1.3 |
tmnxEhsHandlerLastChangeThe value of tmnxEhsHandlerLastChange indicates the time this row
entry was last changed.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.12.29.2.1.4 |
tmnxEhsHandlerAdminStatusThe value of tmnxEhsHandlerAdminStatus specifies the administrative
state of the EHS Event Handler.rw TmnxAdminState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.12.29.2.1.5 |
tmnxEhsHandlerOperStatusThe value of tmnxEhsHandlerOperStatus indicates the operational state
of the EHS Event Handler.ro TmnxOperState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.12.29.2.1.6 |
tmnxEhsHandlerStatsTableThe tmnxEhsHandlerStatsTable contains operational data for Event
handlers used by the EHS Event Triggers. SEQUENCE OF TmnxEhsHandlerStatsEntry .1.3.6.1.4.1.6527.3.1.2.12.29.3 |
tmnxEhsHandlerStatsEntryDefines a row in the tmnxEhsHandlerStatsTable. Each row contains
operational information about a specific EHS Event Handler.
Rows are created and deleted by the system as rows are created and
deleted in the tmnxEhsHandlerTable. TmnxEhsHandlerStatsEntry .1.3.6.1.4.1.6527.3.1.2.12.29.3.1 |
tmnxEhsHandlerStatsSuccessThe value of tmnxEhsHandlerStatsSuccess indicates the number of times
the EHS system triggers a handler, which can take corresponding action
specified in handler's entriesro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.12.29.3.1.1 |
tmnxEhsHandlerStatsErrNoEntryThe value of tmnxEhsHandlerStatsErrNoEntry indicates the number of
times the EHS system triggers a handler, which can not take
corresponding action as there is no handler's entry specifying an
operation to perform.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.12.29.3.1.2 |
tmnxEhsHandlerStatsErrAdmStatusThe value of tmnxEhsHandlerStatsErrAdmStatus indicates the number of
times the EHS system triggers a handler, which can not take
corresponding action due to admin state of the handler.
The handler may be out-of-service due to tmnxEhsHandlerAdminStatus
being set to 'outOfService (3)'.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.12.29.3.1.3 |
tmnxEhsHEntryTableThe tmnxEhsHEntryTable contains a list of Event Handler Entries in an
EHS Event Handler. SEQUENCE OF TmnxEhsHEntryEntry .1.3.6.1.4.1.6527.3.1.2.12.29.4 |
tmnxEhsHEntryEntryDefines a row in the tmnxEhsHEntryTable. Each row
contains information about a specific Handler Entry.
Rows are created and deleted via SNMP SET operations using
tmnxEhsHEntryRowStatus. TmnxEhsHEntryEntry .1.3.6.1.4.1.6527.3.1.2.12.29.4.1 |
tmnxEhsHEntryIdThe value of tmnxEhsHEntryId specifies the index of an Event Entry in
the EHS Event Handler indicated by the value of tmnxEhsHandlerName. Unsigned32 .1.3.6.1.4.1.6527.3.1.2.12.29.4.1.1 |
tmnxEhsHEntryRowStatusThe value of tmnxEhsHEntryRowStatus specifies
the row status. It allows rows to be created
and deleted in the tmnxEhsHEntryTable.
If an associated row does not exist in the tmnxEhsHandlerTable, a
attempt to create a row will fail.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.12.29.4.1.2 |
tmnxEhsHEntryDescriptionThe value of tmnxEhsHEntryDescription specifies a user provided
description string for EHS Event Handler Entry. It can consist of any
printable, seven-bit ASCII characters up to 80 characters in length.rw TItemDescription (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.12.29.4.1.3 |
tmnxEhsHEntryLastChangeThe value of tmnxEhsHEntryLastChange indicates the time this row was
last changed.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.12.29.4.1.4 |
tmnxEhsHEntryAdminStatusThe value of tmnxEhsHEntryAdminStatus specifies the administrative
state of the EHS Event Handler Entry.rw TmnxAdminState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.12.29.4.1.5 |
tmnxEhsHEntryOperStatusThe value of tmnxEhsHEntryOperStatus indicates the operational state
of the EHS Event Handler Entry.ro TmnxOperState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.12.29.4.1.6 |
tmnxEhsHEntryScriptPlcyNameThe value of tmnxEhsHEntryScriptPlcyName in combination with the value
of tmnxEhsHEntryScriptPlcyOwner specifies the script policy that can
be launched from this tmnxEhsHEntryTable row. The zero-length string
may be used to point to a non-existing script policy.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.12.29.4.1.7 |
tmnxEhsHEntryScriptPlcyOwnerThe value of tmnxEhsHEntryScriptPlcyOwner in combination with the
value of tmnxEhsHEntryScriptPlcyName specifies the script policy that
can be launched from this tmnxEhsHEntryTable row. The zero-length
string may be used to point to a non-existing script policy.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.12.29.4.1.8 |
tmnxEhsHEntryMinDelayThe value of tmnxEhsHEntryMinDelay specifies the minimum
time, in seconds, between executions of the script policy
specified by this EHS Event Handler Entry. A '0' value means
no delay is imposed.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.12.29.4.1.9 |
tmnxEhsHEntryLastExecutedThe value of tmnxEhsHEntryLastExecuted indicates the time when handler
entry launch execution of action.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.12.29.4.1.10 |
tmnxEhsHEntryStatsTableThe tmnxEhsHEntryStatsTable contains operational data for Event
Handler Entries used by an EHS Event Handler. SEQUENCE OF TmnxEhsHEntryStatsEntry .1.3.6.1.4.1.6527.3.1.2.12.29.5 |
tmnxEhsHEntryStatsEntryDefines a row entry in the tmnxEhsHEntryStatsTable. Each row contains
operational information about a specific EHS Event Handler Entry.
Rows are created and deleted by the system as rows are created and
deleted in the tmnxEhsHEntryTable. TmnxEhsHEntryStatsEntry .1.3.6.1.4.1.6527.3.1.2.12.29.5.1 |
tmnxEhsHEntryStatsLaunchSuccessThe value of tmnxEhsHEntryStatsLaunchSuccess indicates the number of
successfully queued scripts by EHS handler entry.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.12.29.5.1.1 |
tmnxEhsHEntryStatsErrMinDelayThe value of tmnxEhsHEntryStatsErrMinDelay indicates the number of
cancelled script executions due to tmnxEhsHEntryMinDelay.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.12.29.5.1.2 |
tmnxEhsHEntryStatsErrLaunchThe value of tmnxEhsHEntryStatsErrLaunch indicates the number of
cancelled script executions due to launch failure.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.12.29.5.1.3 |
tmnxEhsHEntryStatsErrAdmStatusThe value of tmnxEhsHEntryStatsErrAdmStatus indicates the number of
cancelled script executions due to admin state of the handler entry.
The handler entry may be out-of-service due to
tmnxEhsHEntryAdminStatus being set to 'outOfService (3)'.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.12.29.5.1.4 |
tmnxEhsTriggerTableThe tmnxEhsTriggerTable contains a list of Event Triggers used by the
Event Handling System (EHS). SEQUENCE OF TmnxEhsTriggerEntry .1.3.6.1.4.1.6527.3.1.2.12.29.6 |
tmnxEhsTriggerEntryDefines a row in the tmnxEhsTriggerTable. Each row
contains information about a specific Event Handling
system (EHS) Event Trigger.
Rows are created and deleted via SNMP SET operations using
tmnxEhsTriggerRowStatus. TmnxEhsTriggerEntry .1.3.6.1.4.1.6527.3.1.2.12.29.6.1 |
tmnxEhsTriggerRowStatusThe value of tmnxEhsTriggerRowStatus specifies
the row status. It allows rows to be created
and deleted in the tmnxEhsTriggerTable.
If any associated rows exist in the tmnxEhsTEntryTable, 'destroy' will
fail with an 'inconsistentValue' error. All associated rows in the
tmnxEhsTEntryTable must be destroyed first.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.12.29.6.1.1 |
tmnxEhsTriggerDescriptionThe value of tmnxEhsTriggerDescription specifies a user provided
description string for an EHS Event Trigger. It can consist of any
printable, seven-bit ASCII characters up to 80 characters in length.rw TItemDescription (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.12.29.6.1.2 |
tmnxEhsTriggerLastChangeThe value of tmnxEhsTriggerLastChange indicates the time this row was
last changed.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.12.29.6.1.3 |
tmnxEhsTriggerAdminStatusThe value of tmnxEhsTriggerAdminStatus specifies the administrative
state of the EHS Event Trigger.rw TmnxAdminState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.12.29.6.1.4 |
tmnxEhsTriggerOperStatusThe value of tmnxEhsTriggerOperStatus indicates the operational state
of the EHS Event Trigger.ro TmnxOperState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.12.29.6.1.5 |
tmnxEhsTriggerStatsTableThe tmnxEhsTriggerStatsTable contains operational data for Event
Triggers used by the Event Handling System (EHS). SEQUENCE OF TmnxEhsTriggerStatsEntry .1.3.6.1.4.1.6527.3.1.2.12.29.7 |
tmnxEhsTriggerStatsEntryDefines a row in the tmnxEhsTriggerStatsTable. Each row contains
operational information about a specific EHS Event Trigger.
Rows are created and deleted by the system as rows are created and
deleted in the tmnxEhsTriggerTable. TmnxEhsTriggerStatsEntry .1.3.6.1.4.1.6527.3.1.2.12.29.7.1 |
tmnxEhsTriggerStatsSuccessThe value of tmnxEhsTriggerStatsSuccess indicates the number of not
ignored logger event occurrences associated with EHS trigger.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.12.29.7.1.1 |
tmnxEhsTriggerStatsErrNoEntryThe value of tmnxEhsTriggerStatsErrNoEntry indicates the number of
ignored logger event occurrences associated with EHS trigger. Event is
ignored due to no trigger entry configured for this trigger.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.12.29.7.1.2 |
tmnxEhsTriggerStatsErrAdmStatusThe value of tmnxEhsTriggerStatsErrAdmStatus indicates the number of
ignored logger event occurrences associated with EHS trigger. Event is
ignored due to admin state of the trigger.
The trigger may be out-of-service due to tmnxEhsTriggerAdminStatus
being set to 'outOfService (3)'.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.12.29.7.1.3 |
tmnxEhsTEntryTableThe tmnxEhsTEntryTable contains a list of Event Trigger Entries in an
EHS Event Trigger. SEQUENCE OF TmnxEhsTEntryEntry .1.3.6.1.4.1.6527.3.1.2.12.29.8 |
tmnxEhsTEntryEntryDefines a row in the tmnxEhsTEntryTable. Each row
contains information about a specific EHS Event Trigger
Entry.
Rows are created and deleted via SNMP SET operations using
tmnxEhsTEntryRowStatus. TmnxEhsTEntryEntry .1.3.6.1.4.1.6527.3.1.2.12.29.8.1 |
tmnxEhsTEntryIdThe value of tmnxEhsTEntryId specifies the index of a Trigger Entry in
the EHS Event Trigger indicated by the value of tmnxEventAppIndex and
tmnxEventID. Unsigned32 .1.3.6.1.4.1.6527.3.1.2.12.29.8.1.1 |
tmnxEhsTEntryRowStatusThe value of tmnxEhsTEntryRowStatus specifies
the row status. It allows entries to be created
and deleted in the tmnxEhsTEntryTable.
If an associated row does not exist in the tmnxEhsTriggerTable, an
attempt to create this row entry will fail.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.12.29.8.1.2 |
tmnxEhsTEntryDescriptionThe value of tmnxEhsTEntryDescription specifies a user provided
description string for EHS Event Trigger Entry. It can consist of any
printable, seven-bit ASCII characters up to 80 characters in length.rw TItemDescription (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.12.29.8.1.3 |
tmnxEhsTEntryLastChangeThe value of tmnxEhsTEntryLastChange indicates the time this row entry
was last changed.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.12.29.8.1.4 |
tmnxEhsTEntryAdminStatusThe value of tmnxEhsTEntryAdminStatus specifies the administrative
state of the EHS Event Trigger Entry.rw TmnxAdminState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.12.29.8.1.5 |
tmnxEhsTEntryOperStatusThe value of tmnxEhsTEntryOperStatus indicates the operational state
of the EHS Event Trigger Entry.ro TmnxOperState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.12.29.8.1.6 |
tmnxEhsTEntryLogFilterIdThe value of tmnxEhsTEntryLogFilterId specifies the logger filter
to apply to a generated logger event. If the logger filter match
succeeds, the actions indicated in the associated EHS Event Handler,
indicated by the value of tmnxEhsTEntryHandlerName, are applied.
A value of 0 indicates there is no associated logger filter and
therefore the associated EHS Event Handler is always applied.rw TmnxLogFilterId .1.3.6.1.4.1.6527.3.1.2.12.29.8.1.7 |
tmnxEhsTEntryHandlerNameThe value of tmnxEhsTEntryHandlerName specifies the EHS Event Handler
to be applied. The zero-length string may be used to point to a
non-existing Event Handler.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.12.29.8.1.8 |
tmnxEhsTEntryDebounceValThe value of tmnxEhsTEntryDebounceVal specifies the number of times an
event has to occur within a specific time window given by
tmnxEhsTEntryDebounceTime for EHS Event to trigger a response.rw Unsigned32 (0 | 2..15) .1.3.6.1.4.1.6527.3.1.2.12.29.8.1.9 |
tmnxEhsTEntryDebounceTimeThe value of tmnxEhsTEntryDebounceTime specifies the time window
within which a specific event must occur more than the value specified
by tmnxEhsTEntryDebounceVal for EHS to trigger a response.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.12.29.8.1.10 |
tmnxEhsTEntryStatsTableThe Nokia SROS series tmnxEhsTEntryStatsTable contains operational
data for Event Trigger Entries used by an EHS Event Trigger. SEQUENCE OF TmnxEhsTEntryStatsEntry .1.3.6.1.4.1.6527.3.1.2.12.29.9 |
tmnxEhsTEntryStatsEntryDefines a row in the tmnxEhsTEntryStatsTable. Each row contains
operational information about a specific EHS Event Trigger Entry.
Rows are created and deleted by the system as row are created and
deleted in the tmnxEhsTEntryTable. TmnxEhsTEntryStatsEntry .1.3.6.1.4.1.6527.3.1.2.12.29.9.1 |
tmnxEhsTEntryStatsFilterMatchThe value of tmnxEhsTEntryStatsFilterMatch indicates the number of
times a filter, for the specified trigger entry, matches an logger
event.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.12.29.9.1.1 |
tmnxEhsTEntryStatsFilterFailThe value of tmnxEhsTEntryStatsFilterFail indicates the number of
times a filter, for the specified trigger entry, does not match an
logger event.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.12.29.9.1.2 |
tmnxEhsTEntryStatsErrAdminStatusThe value of tmnxEhsTEntryStatsErrAdminStatus indicates the number of
times the logger event will be ignored due to admin state of EHS
trigger entry.
The trigger entry may be out-of-service due to
tmnxEhsTEntryAdminStatus being set to 'outOfService (3)'.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.12.29.9.1.3 |
tmnxEhsTEntryStatsErrFilterThe value of tmnxEhsTEntryStatsErrFilter indicates the number of times
the logger event will be ignored due to filter is not operational or
is not configured in EHS trigger entry.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.12.29.9.1.4 |
tmnxEhsTEntryStatsErrHandlerThe value of tmnxEhsTEntryStatsErrHandler indicates the number of
times the logger event will be ignored due to filter is not
operational or is not configured in EHS trigger entry.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.12.29.9.1.5 |
tmnxEhsTEntryStatsTriggerCountThe value of tmnxEhsTEntryStatsTriggerCount indicates the number of
times script execution is triggered after filter match.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.12.29.9.1.6 |
tmnxEhsTEntryStatsDebounceThe value of the tmnxEhsTEntryStatsDebounce indicates the number of
times script is not executed due to debounce rule.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.12.29.9.1.7 |
tmnxLogCliSubscrTableThe tmnxLogCliSubscrTable contains information about CLI user session
subscriptions to logs. SEQUENCE OF TmnxLogCliSubscrEntry .1.3.6.1.4.1.6527.3.1.2.12.30 |
tmnxLogCliSubscrEntryEach conceptual row represents information about a subscription of a
particular CLI user session to a particular log.
Entries in this table are created and destroyed automatically by the
system. TmnxLogCliSubscrEntry .1.3.6.1.4.1.6527.3.1.2.12.30.1 |
tmnxLogCliSubscrSessionThe value of the object tmnxLogCliSubscrSession indicates the unique
identifier of a CLI user session. Unsigned32 .1.3.6.1.4.1.6527.3.1.2.12.30.1.1 |
tmnxLogCliSubscrLogThe value of tmnxLogCliSubscrLog indicates the unique identifier of an
event stream log.
It refers to a conceptual row in the tmnxLogIdTable. TmnxLogIdIndex .1.3.6.1.4.1.6527.3.1.2.12.30.1.2 |
tmnxLogCliSubscrTypeThe value of the object tmnxLogCliSubscrType indicates the type of
session.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.12.30.1.3 |
tmnxLogCliSubscrUserThe value of the object tmnxLogCliSubscrUser indicates the name of the
user associated with the CLI session.ro TNamedItem (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.12.30.1.4 |
tmnxLogCliSubscrUserLoginTimeThe value of tmnxLogCliSubscrUserLoginTime indicates the time the user
logged in.ro DateAndTime .1.3.6.1.4.1.6527.3.1.2.12.30.1.5 |
tmnxLogCliSubscrUserIpAddrTypeThe value of tmnxLogCliSubscrUserIpAddrType indicates the address type
of tmnxLogCliSubscrUserIpAddr.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.12.30.1.6 |
tmnxLogCliSubscrUserIpAddrThe value of the object tmnxLogCliSubscrUserIpAddr indicates
the IP address of the user.ro InetAddress .1.3.6.1.4.1.6527.3.1.2.12.30.1.7 |
tmnxLogApCustRecordPolicerTableThe Nokia SROS series tmnxLogApCustRecordPolicerTable allows to create
custom record policer information for a given accounting policy. Rows
can only be created for existing accounting policies (as defined in
tmnxLogApTable). SEQUENCE OF TmnxLogApCustRecordPolicerEntry .1.3.6.1.4.1.6527.3.1.2.12.31 |
tmnxLogApCustRecordPolicerEntryA conceptual row contains the specification of the counters that must
be collected for a particular policer and accounting policy.
A conceptual row can be created and destroyed by means of the
tmnxLogApCrPolicerRowStatus object. TmnxLogApCustRecordPolicerEntry .1.3.6.1.4.1.6527.3.1.2.12.31.1 |
tmnxLogApCrPolicerIdThe value of tmnxLogApCrPolicerId specifies the policer ID for which
counters will be collected in this custom record.
The counters that will be collected are defined in
tmnxLogApCrPolicerICounters and tmnxLogApCrPolicerECounters. Unsigned32 .1.3.6.1.4.1.6527.3.1.2.12.31.1.1 |
tmnxLogApCrPolicerLastChangedThe value of tmnxLogApCrPolicerLastChanged indicates the sysUpTime
when an object in this table was last modified.
A value of zero means that no change was made to this row since it was
created.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.12.31.1.2 |
tmnxLogApCrPolicerRowStatusRow Status of the entry. This allows creation/deletion of rows in this
table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.12.31.1.3 |
tmnxLogApCrPolicerICountersThe value of tmnxLogApCrPolicerICounters specifies the list of ingress
counters that need to be collected in this custom record.rw TmnxAccPlcyPolicerICounters .1.3.6.1.4.1.6527.3.1.2.12.31.1.4 |
tmnxLogApCrPolicerECountersThe value of tmnxLogApCrPolicerECounters specifies the list of egress
counters that need to be collected in this custom record.rw TmnxAccPlcyPolicerECounters .1.3.6.1.4.1.6527.3.1.2.12.31.1.5 |
tmnxLogFileEncryptKeyThe value of tmnxLogFileEncryptKey specifies the key used when
decrypting log files. A get request to this object will always return
an empty string. By default, tmnxLogFileEncryptKey will be an empty
string.rw DisplayString .1.3.6.1.4.1.6527.3.1.2.12.32 |
tmnxLogFilesTotalSizeThe value of tmnxLogFilesTotalSize specifies the maximum log files
size. The value zero specifies that no limit is specified.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.12.33 |
tmnxLogApFilesTotalSizeThe value of tmnxLogApFilesTotalSize specifies the maximum accounting
log files size. The value zero specifies that no limit is specified.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.12.34 |
tmnxLogEventTestCustomTextThe value of the object tmnxLogEventTestCustomText custom text which
will be used in Logger 2011 tmnxTestEvent event.rw OCTET STRING .1.3.6.1.4.1.6527.3.1.2.12.35 |
tmnxLogNotifyPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.3.12 |
tmnxLogNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.3.12.0 |
tmnxLogSpaceContentionGenerated when space contention occurs on the compact flash where
a log or accounting file creation is being attempted. Space contention
exists if:
Insufficient space is available on the compact flash to create
a file of the same size as the file being rolled over.
The first file of this type is being created and less than
10% of the total compact flash space is available.
A write operation on a log or accounting file is denied due to
lack of space. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.12.0.1 |
tmnxLogAdminLocFailedGenerated when an attempt to create a log or accounting file at the
location specified by tmnxLogFileIdAdminLocation has failed. Indicates
that the backup location, if specified, will be used. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.12.0.2 |
tmnxLogBackupLocFailedGenerated when an attempt to create a log or accounting file at the
location specified by tmnxLogFileIdBackupLoc has failed. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.12.0.3 |
tmnxLogFileRolloverGenerated when an event log or accounting policy file's
rollover time has expired. The file located as indicated
by the value of tmnxLogFileIdOperLocation is closed and a new
file is created as specified by tmnxLogFileIdAdminLocation
and tmnxLogFileIdBackupLoc. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.12.0.4 |
tmnxLogFileDeletedGenerated when a closed event log or accounting policy file has been
deleted as part of the space contention cleanup. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.12.0.5 |
tmnxTestEventThe tmnxTestEvent notification is generated when the object
tmnxEventTest is set to a value of 'doAction'. This event can
be used to test that remote log destinations such as syslog and
snmp trap destinations are configured correctly. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.12.0.6 |
tmnxLogTraceError[CAUSE] The tmnxLogTraceError notification is generated when a
critical level trace error has been detected by the software. There
are multiple triggers for such a trace error.
[EFFECT] Effect varies depending on the specific trigger.
[RECOVERY] Contact Nokia Support. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.12.0.7 |
tmnxLogEventThrottledA tmnxLogEventThrottled notification is generated at the end of the
throttling interval when one or more events are dropped because the
throttling limit was reached for that interval. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.12.0.8 |
tmnxSysLogTargetProblemA tmnxSysLogTargetProblem notification is generated when a problem is
encountered when trying to deliver data to the syslog destination
identified by the tmnxSysLogTargetId. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.12.0.9 |
tmnxLogAccountingDataLossA tmnxLogAccountingDataLoss notification is generated
when an accounting file is still being written to
when the next interval ends. The collection of
statistics for the past interval is immediately
stopped and collection is started for the next
interval. There are missing records in the file
for this past interval. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.12.0.10 |
tmnxStdEventsReplayedA tmnxStdEventsReplayed notification is generated when
an SNMP trap target address is added to the RTM (tmnxVRtrID)
following a period when the address had been removed.
The value of tmnxStdReplayStartEvent is the SNMP notification
request ID of the first event that was replayed. The value
of tmnxStdReplayEndEvent is the SNMP notification request ID of the
last missed event that was replayed. The value of
tmnxStdReplayStart is the request ID of the first event for
which there was no route to the trap target address. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.12.0.11 |
tmnxLogEventOverrun[CAUSE] A tmnxLogEventOverrun notification is generated
at the end of the overrun throttling interval when one or more
events of the type specified by tmnxLogThrottledEventID were
dropped because the logger input stream's input queue limit
was exceeded. The overrun throttling interval begins when the
input queue limit is first exceeded and ends when the number of
events in the input queue has dropped below an internal low
watermark. At that point a tmnxLogEventOverrun notification is
generated for each event type that had one or more events dropped
because of the input queue overrun. The number of dropped events
is specified by tmnxLogThrottledEvents.
[EFFECT] Logger events have been dropped and were not sent to any
log destination. tmnxEventDropCount has been incremented for
each event dropped because of input queue overrun.
[RECOVERY] The specific event information of dropped events
cannot be recovered. The frequency of input queue overruns
can be lessened by configuring as few event logs as possible,
especially those going to remote destinations such as file,
syslog and snmp notification logs. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.12.0.12 |
tmnxCustomEvent1[CAUSE] A tmnxCustomEvent1 notification is generated on demand when
operator types perform log custom-event from MD interface, or
equivalent is received from NETCONF interface, with severity critical.
[EFFECT] tmnxCustomEvent1 notification with all custom set fields is
sent to all supported interfaces, Log, NETCONF, SNMP.
[RECOVERY] No action needed. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.12.0.13 |
tmnxCustomEvent2[CAUSE] A tmnxCustomEvent2 notification is generated on demand when
operator types perform log custom-event from MD interface, or
equivalent is received from NETCONF interface, with severity major.
[EFFECT] tmnxCustomEvent2 notification with all custom set fields is
sent to all supported interfaces, Log, NETCONF, SNMP.
[RECOVERY] No action needed. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.12.0.14 |
tmnxCustomEvent3[CAUSE] A tmnxCustomEvent3 notification is generated on demand when
operator types perform log custom-event from MD interface, or
equivalent is received from NETCONF interface, with severity minor.
[EFFECT] tmnxCustomEvent3 notification with all custom set fields is
sent to all supported interfaces, Log, NETCONF, SNMP.
[RECOVERY] No action needed. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.12.0.15 |
tmnxCustomEvent4[CAUSE] A tmnxCustomEvent4 notification is generated on demand when
operator types perform log custom-event from MD interface, or
equivalent is received from NETCONF interface, with severity warning.
[EFFECT] tmnxCustomEvent4 notification with all custom set fields is
sent to all supported interfaces, Log, NETCONF, SNMP.
[RECOVERY] No action needed. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.12.0.16 |
tmnxCustomEvent5[CAUSE] A tmnxCustomEvent5 notification is generated on demand when
operator types perform log custom-event from MD interface, or
equivalent is received from NETCONF interface, with severity cleared.
[EFFECT] tmnxCustomEvent5 notification with all custom set fields is
sent to all supported interfaces, Log, NETCONF, SNMP.
[RECOVERY] No action needed. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.12.0.17 |
tmnxCustomEvent6[CAUSE] A tmnxCustomEvent6 notification is generated on demand when
operator types perform log custom-event from MD interface, or
equivalent is received from NETCONF interface, with severity
indeterminate.
[EFFECT] tmnxCustomEvent6 notification with all custom set fields is
sent to all supported interfaces, Log, NETCONF, SNMP.
[RECOVERY] No action needed. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.12.0.18 |
tmnxNetconfNotifyOverrun[CAUSE] A tmnxNetconfNotifyOverrun notification is generated when
Netconf Notify queue is overrun. This queue is responsible for sending
log events into Netconf servers as Netconf Notifications. Link to
Netconf server is too slow for current log event rate or link to
Netconf server is down.
[EFFECT] Logger events have been dropped and were not sent to
particular Netconf stream destination.
[RECOVERY] Use faster link to Netconf server, or implement throttle
policies, to decrease number of reported events. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.12.0.19 |