TERACOM-TCW260-MIB
AI MIB Summary
The TERACOM-TCW260-MIB provides SNMP management interfaces for Teracom TCW260 cable modem termination system (CMTS) or edge router hardware, enabling monitoring of physical layer statistics, interface status, and device health metrics specific to this vendor's DOCSIS or broadband access infrastructure.
The MIB module for TCW260 SNMP entities.
Main OID:
snmpMIB.1.3.6.1.6.3.1
99
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
99 total| Object Name |
|---|
teracom OBJECT IDENTIFIER .1.3.6.1.4.1.38783 |
tcw260 OBJECT IDENTIFIER .1.3.6.1.4.1.38783.6 |
trapNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.38783.6.0 |
snmp_trap_notificationSMIV2 Trap notification information for the SNMP Manager. NOTIFICATION-TYPE .1.3.6.1.4.1.38783.6.0.1 |
product OBJECT IDENTIFIER .1.3.6.1.4.1.38783.6.1 |
nameName of productro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.38783.6.1.1 |
versionVersion stringro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.38783.6.1.2 |
dateTimeDate and timero DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.38783.6.1.3 |
setup OBJECT IDENTIFIER .1.3.6.1.4.1.38783.6.2 |
network OBJECT IDENTIFIER .1.3.6.1.4.1.38783.6.2.1 |
deviceIDDevice ID is Default MAC Addressro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.38783.6.2.1.1 |
hostNameHost Namero DisplayString .1.3.6.1.4.1.38783.6.2.1.2 |
deviceIPDevice IP Addressro IpAddress .1.3.6.1.4.1.38783.6.2.1.3 |
parameters OBJECT IDENTIFIER .1.3.6.1.4.1.38783.6.2.2 |
mbSensors OBJECT IDENTIFIER .1.3.6.1.4.1.38783.6.2.2.1 |
mbSensorsTableTable containing modbus rtu parameters. SEQUENCE OF MbSensorsEntry .1.3.6.1.4.1.38783.6.2.2.1.1 |
mbSensorsEntryEntry containing modbus rtu parameters. MbSensorsEntry .1.3.6.1.4.1.38783.6.2.2.1.1.1 |
mbSenIndexIndex of modbus rtu table MbSenTableIndex .1.3.6.1.4.1.38783.6.2.2.1.1.1.1 |
mbSenDescriptionSensor descriptionrw DisplayString .1.3.6.1.4.1.38783.6.2.2.1.1.1.2 |
mbSenMultSensor multiplier x1000 in Integer formatrw RealValue .1.3.6.1.4.1.38783.6.2.2.1.1.1.3 |
mbSenOffsetSensor offset x1000 in Integer formatrw RealValue .1.3.6.1.4.1.38783.6.2.2.1.1.1.4 |
mbSenValSensor value x1000 in Integer formatro RealValue .1.3.6.1.4.1.38783.6.2.2.1.1.1.5 |
mbSenCounterSensor as 32 bit Counterro Counter32 .1.3.6.1.4.1.38783.6.2.2.1.1.1.6 |
analogInputs OBJECT IDENTIFIER .1.3.6.1.4.1.38783.6.2.2.2 |
analogInpTableTable containing analog inputs parameters. SEQUENCE OF AnalogInpEntry .1.3.6.1.4.1.38783.6.2.2.2.1 |
analogInpEntryEntry containing analog inputs parameters. AnalogInpEntry .1.3.6.1.4.1.38783.6.2.2.2.1.1 |
analogInpIndexIndex of analog inputs table AnalogInpTableIndex .1.3.6.1.4.1.38783.6.2.2.2.1.1.1 |
analogInpDescriptionAnalog input descriptionrw DisplayString .1.3.6.1.4.1.38783.6.2.2.2.1.1.2 |
analogInpMultAnalog input multiplier x1000 in Integer formatrw RealValue .1.3.6.1.4.1.38783.6.2.2.2.1.1.3 |
analogInpOffsetAnalog input offset x1000 in Integer formatrw RealValue .1.3.6.1.4.1.38783.6.2.2.2.1.1.4 |
analogInpModeAnalog input mode - 0-10V or 4-20mArw AnalogMode .1.3.6.1.4.1.38783.6.2.2.2.1.1.5 |
analogInpValueAnalog input value x1000 in Integer formatro RealValue .1.3.6.1.4.1.38783.6.2.2.2.1.1.6 |
digitalInputs OBJECT IDENTIFIER .1.3.6.1.4.1.38783.6.2.2.3 |
digitalInpTableTable containing digital inputs parameters. SEQUENCE OF DigitalInpEntry .1.3.6.1.4.1.38783.6.2.2.3.1 |
digitalInpEntryEntry containing digital inputs parameters. DigitalInpEntry .1.3.6.1.4.1.38783.6.2.2.3.1.1 |
digInpIndexIndex of digital inputs table DigInpTableIndex .1.3.6.1.4.1.38783.6.2.2.3.1.1.1 |
digInpDescriptionDigital Input descriptionrw DisplayString .1.3.6.1.4.1.38783.6.2.2.3.1.1.2 |
digInplowLevelDigital Input closed staterw DisplayString .1.3.6.1.4.1.38783.6.2.2.3.1.1.3 |
digInphighLevelDigital Input open staterw DisplayString .1.3.6.1.4.1.38783.6.2.2.3.1.1.4 |
digInpModeDigital Input mode - Discrete or Counterrw DigitalMode .1.3.6.1.4.1.38783.6.2.2.3.1.1.5 |
digInpCloseToOpenDelayClose To Open delayrw DigInputDelay .1.3.6.1.4.1.38783.6.2.2.3.1.1.6 |
digInpOpenToCloseDelayOpen To Close delayrw DigInputDelay .1.3.6.1.4.1.38783.6.2.2.3.1.1.7 |
digInpCounterInitValueCounter initial valuerw Unsigned32 .1.3.6.1.4.1.38783.6.2.2.3.1.1.8 |
digInpValueDigital input valuero DigitalValue .1.3.6.1.4.1.38783.6.2.2.3.1.1.9 |
monitorNcontrol OBJECT IDENTIFIER .1.3.6.1.4.1.38783.6.3 |
channels OBJECT IDENTIFIER .1.3.6.1.4.1.38783.6.3.1 |
chanTableTable containing channels parameters. SEQUENCE OF ChanEntry .1.3.6.1.4.1.38783.6.3.1.1 |
chanEntryEntry containing channels parameters. ChanEntry .1.3.6.1.4.1.38783.6.3.1.1.1 |
chIndexIndex of channels table ChTableIndex .1.3.6.1.4.1.38783.6.3.1.1.1.1 |
chTypeChannel 1 typerw ChannelType .1.3.6.1.4.1.38783.6.3.1.1.1.2 |
chDescriptionChannel descriptionrw DisplayString .1.3.6.1.4.1.38783.6.3.1.1.1.3 |
chParam1Channel parameter 1rw ChannelParameter1 .1.3.6.1.4.1.38783.6.3.1.1.1.4 |
chOP1Channel operand 1rw ChannelOperand .1.3.6.1.4.1.38783.6.3.1.1.1.5 |
chParam2Channel parameter 2rw ChannelParameter2 .1.3.6.1.4.1.38783.6.3.1.1.1.6 |
chOP2Channel operand 2rw ChannelOperand .1.3.6.1.4.1.38783.6.3.1.1.1.7 |
chCoef1Channel coefficient 1 x1000 in Integer formatrw RealValue .1.3.6.1.4.1.38783.6.3.1.1.1.8 |
chOP3Channel operand 3rw ChannelOperand .1.3.6.1.4.1.38783.6.3.1.1.1.9 |
chCoef2Channel coefficient 2 x1000 in Integer formatrw RealValue .1.3.6.1.4.1.38783.6.3.1.1.1.10 |
chUnitChannel 1 unitrw DisplayString .1.3.6.1.4.1.38783.6.3.1.1.1.11 |
chCumulInitValueChannel cumulative initial value x1000 in Integer formatrw RealValue .1.3.6.1.4.1.38783.6.3.1.1.1.12 |
chValueChannel value x1000 in Integer formatro RealValue .1.3.6.1.4.1.38783.6.3.1.1.1.13 |
chCounterChannel as 32 bit counterro Counter32 .1.3.6.1.4.1.38783.6.3.1.1.1.14 |
chAlarmStatusChannel alarm statusro AlarmLevel .1.3.6.1.4.1.38783.6.3.1.1.1.15 |
alarms OBJECT IDENTIFIER .1.3.6.1.4.1.38783.6.3.2 |
alarmsTableTable containing alarms parameters. SEQUENCE OF AlarmsEntry .1.3.6.1.4.1.38783.6.3.2.1 |
alarmsEntryEntry containing alarms parameters. AlarmsEntry .1.3.6.1.4.1.38783.6.3.2.1.1 |
alIndexIndex of alarms table AlTableIndex .1.3.6.1.4.1.38783.6.3.2.1.1.1 |
alDescriptionAlarm 1 descriptionrw DisplayString .1.3.6.1.4.1.38783.6.3.2.1.1.2 |
alCond1ChannelAlarm 1 condition 1 channelrw AlarmChannel .1.3.6.1.4.1.38783.6.3.2.1.1.3 |
alCond1OperandAlarm 1 condition 1 operandrw AlarmCondOperand .1.3.6.1.4.1.38783.6.3.2.1.1.4 |
alCond1LimitAlarm 1 condition 1 limit x1000 in Integer formatrw RealValue .1.3.6.1.4.1.38783.6.3.2.1.1.5 |
alCond1HysAlarm 1 condition 1 hysteresis x1000 in Integer formatrw RealValue .1.3.6.1.4.1.38783.6.3.2.1.1.6 |
alCond1AlarmStateAlarm 1 condition 1 discrete alarm staterw DiscreteAlarmState .1.3.6.1.4.1.38783.6.3.2.1.1.7 |
alCondLogicAlarm 1 conditions logicrw AlarmCondLogic .1.3.6.1.4.1.38783.6.3.2.1.1.8 |
alCond2ChannelAlarm 1 condition 2 channelrw AlarmChannel .1.3.6.1.4.1.38783.6.3.2.1.1.9 |
alCond2OperandAlarm 1 condition 2 operandrw AlarmCondOperand .1.3.6.1.4.1.38783.6.3.2.1.1.10 |
alCond2LimitAlarm 1 condition 2 limit x1000 in Integer formatrw RealValue .1.3.6.1.4.1.38783.6.3.2.1.1.11 |
alCond2HysAlarm 1 condition 2 hysteresis x1000 in Integer formatrw RealValue .1.3.6.1.4.1.38783.6.3.2.1.1.12 |
alCond2AlarmStateAlarm 1 condition 2 discrete alarm staterw DiscreteAlarmState .1.3.6.1.4.1.38783.6.3.2.1.1.13 |
alTypeAlarm 1 typerw AlarmType .1.3.6.1.4.1.38783.6.3.2.1.1.14 |
alAssignedAlarm 1 assigned torw AlarmChannel .1.3.6.1.4.1.38783.6.3.2.1.1.15 |
alActionDelayAlarm 1 action delay x1000 in Integer formatrw AlarmActionDelay .1.3.6.1.4.1.38783.6.3.2.1.1.16 |
alActionOnReturnAlarm 1 action on returnrw AlarmActionOnReturn .1.3.6.1.4.1.38783.6.3.2.1.1.17 |
alAction1Alarm 1 action 1rw AlarmAction .1.3.6.1.4.1.38783.6.3.2.1.1.18 |
alAction2Alarm 1 action 2rw AlarmAction .1.3.6.1.4.1.38783.6.3.2.1.1.19 |
alAction3Alarm 1 action 3rw AlarmAction .1.3.6.1.4.1.38783.6.3.2.1.1.20 |
alStatusAlarm 1 statusro AlarmLevel .1.3.6.1.4.1.38783.6.3.2.1.1.21 |
configurationSavedConfiguration save status SAVED/UNSAVEDrw Enumeration .1.3.6.1.4.1.38783.6.3.3 |
restartDeviceRestart Devicerw Enumeration .1.3.6.1.4.1.38783.6.3.4 |
hardwareErrHardware Errorro Enumeration .1.3.6.1.4.1.38783.6.3.5 |
tcw260MIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.38783.6.4 |
tcw260MIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.38783.6.4.1 |
tcw260MIBCompliances1This group is for SNMP applications. Unknown .1.3.6.1.4.1.38783.6.4.1.1 |
tcw260MIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.38783.6.4.2 |
tcw260ProductGroupA collection of objects providing basic product info. Unknown .1.3.6.1.4.1.38783.6.4.2.1 |
tcw260SetupGroupA collection of objects providing basic setup. Unknown .1.3.6.1.4.1.38783.6.4.2.2 |
tcw260MonitorGroupA collection of objects providing basic monitoring and control of a product. Unknown .1.3.6.1.4.1.38783.6.4.2.3 |
tcw260TrapGroupSNMP Trap Notification object. Unknown .1.3.6.1.4.1.38783.6.4.2.4 |
snmpMIBThe MIB module for TCW260 SNMP entities. MODULE-IDENTITY .1.3.6.1.6.3.1 |