TELDAT-MON-INTERF-WLAN-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for TELDAT-MON-INTERF-WLAN-MIB.
100
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
100 total| Object Name |
|---|
telProdNpMonInterfWlan OBJECT IDENTIFIER .telProdNpMonInterfRouter.24 |
IMPORTSThis type is used to represent receiver input levels in dBm. INTEGER (-110..0) WlanRate .telProdNpMonInterfRouter.24 |
telProdNpMonInterfWlanRadioTableThe telProdNpMonInterfWlanRadioTable contains information relating to the
interfaces available on the system. Each entry corresponds to
an available WLAN interface. Entries cannot be added or
deleted by the user.
Creating entries: Entries are created by the system
automatically when a new WLAN module is installed.
Deleting entries: Entries are removed by the system
after the appropriate WLAN module is removed. SEQUENCE OF TelProdNpMonInterfWlanRadioEntry .telProdNpMonInterfRouter.24.1 |
telProdNpMonInterfWlanRadioEntryA base list of objects that are information about Wlan radio data.
The index is the number of the interface TelProdNpMonInterfWlanRadioEntry .telProdNpMonInterfRouter.24.1.1 |
telProdNpMonInterfWlanRadioIfIndexUnique radio index.ro INTEGER .telProdNpMonInterfRouter.24.1.1.1 |
telProdNpMonInterfWlanRadioIfModeMixed and compatibility modes between various 802.11 substandards.ro Enumeration .telProdNpMonInterfRouter.24.1.1.2 |
telProdNpMonInterfWlanRadioIfSpeedThe value defines the bitrate or the coding scheme to use for data frames.ro INTEGER .telProdNpMonInterfRouter.24.1.1.3 |
telProdNpMonInterfWlanRadioIfChannelThe physical channelro INTEGER (-1..256) .telProdNpMonInterfRouter.24.1.1.4 |
telProdNpMonInterfWlanRadioIfRtsThresholdThis attribute shall indicate the number of octets in an
MPDU, below which an RTS/CTS handshake shall not be
performed, except as RTS/CTS is used as a cross modulation
protection mechanism. An RTS/CTS
handshake shall be performed at the beginning of any frame
exchange sequence where the MPDU is of type Data or
Management, the MPDU has an individual address in the
Address1 field, and the length of the MPDU is greater than
this threshold. Setting this attribute to be larger than the
maximum MSDU size shall have the effect of turning off the
RTS/CTS handshake for frames of Data or Management type
transmitted by this STA. Setting this attribute to one
shall have the effect of turning on the RTS/CTS handshake
for all frames of Data or Management type transmitted by
this STA.ro INTEGER (-1..65535) .telProdNpMonInterfRouter.24.1.1.5 |
telProdNpMonInterfWlanRadioIfTxPowerTransmitter output power in dBm.ro INTEGER .telProdNpMonInterfRouter.24.1.1.6 |
telProdNpMonInterfWlanRadioIfBandFrequency band.ro INTEGER .telProdNpMonInterfRouter.24.1.1.7 |
telProdNpMonInterfWlanRadioIfCountryThis attribute identifies the country in which the station is operating.
The first two octets of this string is the two character country code as
described in document ISO/IEC 3166-1. The third octet shall be one of the
following:
1. an ASCII space character, if the regulations under which the
station is operating encompass all environments in the country,
2. an ASCII 'O' character, if the regulations under which the
station is operating are for an Outdoor environment only, or
3. an ASCII 'I' character, if the regulations under which the
station is operating are for an Indoor environment only.ro DisplayString .telProdNpMonInterfRouter.24.1.1.8 |
telProdNpMonInterfWlanRadioIfAddressThe MAC Address.ro MacAddress (SNMPv2-TC) .telProdNpMonInterfRouter.24.1.1.9 |
telProdNpMonInterfWlanRadioIfRealChannelThe actually selected channel for transmit and receive.
In most cases this is the same value as wlanIfChannel,
except if automatic channel selection is active. In this
case, this variable shows the channel in use.ro INTEGER .telProdNpMonInterfRouter.24.1.1.10 |
telProdNpMonInterfWlanRadioIfFragmentThresholdThis attribute shall specify the mandatory maximum size, in
octets, of the PSDU that may be delivered to the PHY.
This maximum size does not apply in the case of A-MPDU. An
MSDU, A-MSDU or MMPDU shall be broken into fragments if its
size exceeds the value of this attribute after adding MAC
headers and trailers. An MSDU, A-MSDU or MMPDU shall be
fragmented when the resulting frame has an individual address
in the Address1 field, and the length of the frame is larger
than this threshold. The default value for this attribute
shall be the lesser of 8000 or the aMPDUMaxLength or the
aPSDUMaxLength of the attached PHY and shall never exceed the
lesser of 8000 or the aMPDUMaxLength or the
aPSDUMaxLength of the attached PHY. The value of this
attribute shall never be less than 256.ro INTEGER .telProdNpMonInterfRouter.24.1.1.11 |
telProdNpMonInterfWlanBSSTableDescribes a WLAN VSS and the corresponding settings SEQUENCE OF TelProdNpMonInterfWlanBSSEntry .telProdNpMonInterfRouter.24.2 |
telProdNpMonInterfWlanBSSEntryA base list of objects that are information about BSS data.
The index is the number of the interface TelProdNpMonInterfWlanBSSEntry .telProdNpMonInterfRouter.24.2.1 |
telProdNpMonInterfWlanBSSIfIndexUnique BSS index.ro INTEGER .telProdNpMonInterfRouter.24.2.1.1 |
telProdNpMonInterfWlanBSSIdThis attribute reflects the SSID.ro DisplayString .telProdNpMonInterfRouter.24.2.1.2 |
telProdNpMonInterfWlanBSSPrivInvokedPrivacy invoked. If enabled, some level of security is invoked
when transmitting data frames.ro Enumeration .telProdNpMonInterfRouter.24.2.1.3 |
telProdNpMonInterfWlanBSSRsnThe Robust Security Network setting.ro Enumeration .telProdNpMonInterfRouter.24.2.1.4 |
telProdNpMonInterfWlanBSSAkmThe Authenticated Key Management setting.ro Enumeration .telProdNpMonInterfRouter.24.2.1.5 |
telProdNpMonInterfWlanBSSCipherThe ciphers in use for WPA or WPA2.
auto(1) is used for TKIP and AESro Enumeration .telProdNpMonInterfRouter.24.2.1.6 |
telProdNpMonInterfWlanBSSDefaultKeyDefault key for WEP encryption. This is the key used
to transmit data frames if WEP is enabledro Enumeration .telProdNpMonInterfRouter.24.2.1.7 |
telProdNpMonInterfWlanBSSKey1Key string for WEP key number 1.ro OCTET STRING .telProdNpMonInterfRouter.24.2.1.8 |
telProdNpMonInterfWlanBSSKey2Key string for WEP key number 2.ro OCTET STRING .telProdNpMonInterfRouter.24.2.1.9 |
telProdNpMonInterfWlanBSSKey3Key string for WEP key number 3.ro OCTET STRING .telProdNpMonInterfRouter.24.2.1.10 |
telProdNpMonInterfWlanBSSKey4Key string for WEP key number 4.ro OCTET STRING .telProdNpMonInterfRouter.24.2.1.11 |
telProdNpMonInterfWlanBSSMaxAsocThe number of allowed clients of the requested BSS.ro INTEGER .telProdNpMonInterfRouter.24.2.1.12 |
telProdNpMonInterfWlanBSSAclMAC Media Access Control via MAC Address.ro Enumeration .telProdNpMonInterfRouter.24.2.1.13 |
telProdNpMonInterfWlanBSSClientIsolationClient isolation setting.ro Enumeration .telProdNpMonInterfRouter.24.2.1.14 |
telProdNpMonInterfWlanBSSHiddenDefine whether SSID is hidden (yes(2)) or not (no(1)).ro Enumeration .telProdNpMonInterfRouter.24.2.1.15 |
telProdNpMonInterfWlanBSSBssIdThis object contains the actual current BSSID for the service set.ro MacAddress (SNMPv2-TC) .telProdNpMonInterfRouter.24.2.1.16 |
telProdNpMonInterfWlanBSSBeaconPeriodThis attribute shall specify the number of TU that a
station shall use for scheduling Beacon transmissions.
This value is transmitted in Beacon and Probe Response
frames.ro INTEGER .telProdNpMonInterfRouter.24.2.1.17 |
telProdNpMonInterfWlanBSSDTIMPeriodThis attribute shall specify the number of beacon
intervals that shall elapse between transmission of
Beacons frames containing a TIM element whose DTIM
Count field is 0. This value is transmitted in
the DTIM Period field of Beacon frames.ro INTEGER .telProdNpMonInterfRouter.24.2.1.18 |
telProdNpMonInterfWlanBSSMSDUTxThis attribute counts the total number of
packets transmitted on this BSS.ro Counter32 .telProdNpMonInterfRouter.24.2.1.19 |
telProdNpMonInterfWlanBSSMSDURxThis attribute counts the total number of
packets received by this BSS.ro Counter32 .telProdNpMonInterfRouter.24.2.1.20 |
telProdNpMonInterfWlanBSSBytesTxTransmitted Bytes.ro Counter32 .telProdNpMonInterfRouter.24.2.1.21 |
telProdNpMonInterfWlanBSSBytesRxReceived Bytes.ro Counter32 .telProdNpMonInterfRouter.24.2.1.22 |
telProdNpMonInterfWlanBSSCurrentCount of current associated stationsro INTEGER .telProdNpMonInterfRouter.24.2.1.23 |
telProdNpMonInterfWlanBSSOpModeThis value specify that the scan properties is used for AP,
client or wds.ro Enumeration .telProdNpMonInterfRouter.24.2.1.24 |
telProdNpMonInterfwlanBSSPassPhrasePassphrase string for WPA-PSK and WPA2-PSK.ro OCTET STRING .telProdNpMonInterfRouter.24.2.1.25 |
telProdNpMonInterfWlanStationTableThe telProdNpMonInterfWlanStation contains information relating to the
clients currently associated to our access points.
Each entry corresponds to
an associated client station (STA).
Entries cannot be added or deleted by the user.
Creating entries: Entries are created by the system
automatically when a new STA ia associated.
Deleting entries: Entries are removed by the system
whenever an associated STA is removed. SEQUENCE OF TelProdNpMonInterfWlanStationEntry .telProdNpMonInterfRouter.24.3 |
telProdNpMonInterfWlanStationEntryA base list of objects that are information about stations.
The index is the number of the interface and the MAC address of the station TelProdNpMonInterfWlanStationEntry .telProdNpMonInterfRouter.24.3.1 |
telProdNpMonInterfWlanStationIfIndexInterface number.ro INTEGER .telProdNpMonInterfRouter.24.3.1.1 |
telProdNpMonInterfWlanStationAddressMAC Address of the Assigned STA.ro MacAddress (SNMPv2-TC) .telProdNpMonInterfRouter.24.3.1.2 |
telProdNpMonInterfWlanStationStateStation state.ro INTEGER .telProdNpMonInterfRouter.24.3.1.3 |
telProdNpMonInterfWlanStationSecurityThe Security Option of the Station.ro Enumeration .telProdNpMonInterfRouter.24.3.1.4 |
telProdNpMonInterfWlanStationNodeThe Node type of the Station.ro Enumeration .telProdNpMonInterfRouter.24.3.1.5 |
telProdNpMonInterfWlanStationMSDUTxThis attribute counts the total number of
packets transmitted to this station.ro Counter32 .telProdNpMonInterfRouter.24.3.1.6 |
telProdNpMonInterfWlanStationMSDURxThis attribute counts the total number of
packets received from this station.ro Counter32 .telProdNpMonInterfRouter.24.3.1.7 |
telProdNpMonInterfWlanStationBytesTxThis attribute counts the total number of
octets transmitted to this station.ro Counter32 .telProdNpMonInterfRouter.24.3.1.8 |
telProdNpMonInterfWlanStationBytesRxThis attribute counts the total number of
octets received from this station.ro Counter32 .telProdNpMonInterfRouter.24.3.1.9 |
telProdNpMonInterfWlanStationRateThis attribute reflects the data rate of the latest
packet received from this station, in 500 kbps units.ro WlanRate .telProdNpMonInterfRouter.24.3.1.10 |
telProdNpMonInterfWlanStationSignalThis attribute shows the received signal strength in dBm.ro WlanRSSI UNITS "dBm" .telProdNpMonInterfRouter.24.3.1.11 |
telProdNpMonInterfWlanStationNoiseThis attribute shows the measured noise level in dBm, or
0 if no connection can be established.ro WlanRSSI UNITS "dBm" .telProdNpMonInterfRouter.24.3.1.12 |
telProdNpMonInterfWlanStationConnectTimeThis attribute records the system uptime at the moment
the client successfully finished association.ro Counter32 UNITS "s" .telProdNpMonInterfRouter.24.3.1.13 |
telProdNpMonInterfWlanACLTableThe WLAN Access List based on MAC Addresses SEQUENCE OF TelProdNpMonInterfWlanACLEntry .telProdNpMonInterfRouter.24.4 |
telProdNpMonInterfWlanACLEntryThe WLAN Access List based on MAC Addresses entry.
Index: telProdNpMonInterfWlanACLIfIndex telProdNpMonInterfWlanACLAddress. TelProdNpMonInterfWlanACLEntry .telProdNpMonInterfRouter.24.4.1 |
telProdNpMonInterfWlanACLIfIndexThe Interface the MAC Address belongs.ro INTEGER .telProdNpMonInterfRouter.24.4.1.1 |
telProdNpMonInterfWlanACLAddressThe MAC Address for the accepted clientro MacAddress (SNMPv2-TC) .telProdNpMonInterfRouter.24.4.1.2 |
telProdNpMonInterfWlanScanResultsTableThis table contains the list of BSS entries found by foreground
or background scanning in client mode. SEQUENCE OF TelProdNpMonInterfWlanScanResultsEntry .telProdNpMonInterfRouter.24.5 |
telProdNpMonInterfWlanScanResultsEntryA entry of the table.
Index: telProdNpMonInterfWlanScanResultsIfIndex, telProdNpMonInterfWlanScanResultsIndex TelProdNpMonInterfWlanScanResultsEntry .telProdNpMonInterfRouter.24.5.1 |
telProdNpMonInterfWlanScanResultsIfIndexifIndex of the WLAN Interface the scan results belong to.ro INTEGER .telProdNpMonInterfRouter.24.5.1.1 |
telProdNpMonInterfWlanScanResultsIndexAuxiliary index for different BSS entries.ro INTEGER .telProdNpMonInterfRouter.24.5.1.2 |
telProdNpMonInterfWlanScanResultsBSSIDBSSID of this BSS.ro MacAddress (SNMPv2-TC) .telProdNpMonInterfRouter.24.5.1.3 |
telProdNpMonInterfWlanScanResultsSSIDSSID aka network name of this BSS.
If broadcasting of SSID is disabled on this
BSS, this string may be empty.ro DisplayString (SNMPv2-TC) .telProdNpMonInterfRouter.24.5.1.4 |
telProdNpMonInterfWlanScanResultsChannelThe channel this BSS was received on.ro INTEGER .telProdNpMonInterfRouter.24.5.1.5 |
telProdNpMonInterfWlanScanResultsSignalReceive signal strength of this BSS.ro WlanRSSI UNITS "dBm" .telProdNpMonInterfRouter.24.5.1.6 |
telProdNpMonInterfWlanScanResultsNoiseThis attribute shows the measured noise level in dBm, or
0 when this value is not available.
It's the value measured during the last reception of data.ro WlanRSSI UNITS "dBm" .telProdNpMonInterfRouter.24.5.1.7 |
telProdNpMonInterfWlanScanResultsBeaconPeriodThis attribute contains the number of TU that this
BSS uses for scheduling Beacon transmissions.ro INTEGER .telProdNpMonInterfRouter.24.5.1.8 |
telProdNpMonInterfWlanScanResultsRatesThis attribute contains one octet for each
supported rate in this BSS, in Mbps units.ro DisplayString (SNMPv2-TC) .telProdNpMonInterfRouter.24.5.1.9 |
telProdNpMonInterfWlanScanResultsBasicRatesThis attribute contains one octet for each required
basic rate in this BSS, in Mbps units.ro DisplayString (SNMPv2-TC) .telProdNpMonInterfRouter.24.5.1.10 |
telProdNpMonInterfWlanScanResultsExtendedRatesThis attribute contains one octet for each supported
extended rate in this BSS, in Mbps units.ro DisplayString (SNMPv2-TC) .telProdNpMonInterfRouter.24.5.1.11 |
telProdNpMonInterfWlanWMMTableDescribes a WLAN WMM Access category settings SEQUENCE OF TelProdNpMonInterfWlanWMMEntry .telProdNpMonInterfRouter.24.6 |
telProdNpMonInterfWlanWMMEntryA entry of the table.
Index: telProdNpMonInterfWlanWMMAccCat, telProdNpMonInterfWlanWMMwlanIf, telProdNpMonInterfWlanWMMType TelProdNpMonInterfWlanWMMEntry .telProdNpMonInterfRouter.24.6.1 |
telProdNpMonInterfWlanWMMwlanIfRadio index the AC belongs to.ro INTEGER .telProdNpMonInterfRouter.24.6.1.1 |
telProdNpMonInterfWlanWMMAccCatAccess category type, each category is mandatory for a wlanIf.
An access category (AC) is a label for the common set of enhanced
distributed channel access (EDCA) parameters that are used by a
quality of service (QoS) station (QSTA) to contend for the channel
in order to transmit medium access control (MAC) service data
units (MSDUs) with certain priorities.
(More info in '802.11E / 3.123 access category (AC)').
besteffort(1): standard/default priority
background(2): low priority
video(3): medium priority (higher than 'besteffort')
voice(4): high priorityro Enumeration .telProdNpMonInterfRouter.24.6.1.2 |
telProdNpMonInterfWlanWMMTypeType to which this telProdNpMonInterfWlanWMMEntry corresponds.
Type access-point means the own parameters for WMM are changed.
The entries with type station will be provided to the connected
stations via WMM-IE.ro Enumeration .telProdNpMonInterfRouter.24.6.1.3 |
telProdNpMonInterfWlanWMMaCWminMinimum size of contention window.
for AC_BK and AC_BE telProdNpMonInterfWlanWMMaCWmin = telProdNpMonInterfWlanIfCWmin,
for AC_VI telProdNpMonInterfWlanWMMaCWmin = (telProdNpMonInterfWlanIfCWmin-1)/2,
for AC_VO telProdNpMonInterfWlanWMMaCWmin = (telProdNpMonInterfWlanIfCWmin-3)/4.ro INTEGER .telProdNpMonInterfRouter.24.6.1.4 |
telProdNpMonInterfWlanWMMaCWmaxMaximum size of contention window.
for AC_BK telProdNpMonInterfWlanWMMaCWmax = telProdNpMonInterfWlanIfCWmax,
for AC_BE telProdNpMonInterfWlanWMMaCWmax = 4*telProdNpMonInterfWlanIfCWmin + 3,
for AC_VI telProdNpMonInterfWlanWMMaCWmax = telProdNpMonInterfWlanIfCWmin,
for AC_VO telProdNpMonInterfWlanWMMaCWmax = (telProdNpMonInterfWlanIfCWmin-1)/2.ro INTEGER .telProdNpMonInterfRouter.24.6.1.5 |
telProdNpMonInterfWlanWMMAifsnArbitration Inter-Frame Space Number (AIFSN)
for this Access category.ro INTEGER .telProdNpMonInterfRouter.24.6.1.6 |
telProdNpMonInterfWlanWMMTxopLimit802.11 mode Transmit Opportunity Limit. The TxopLimit
value is given in units of 32 microseconds.ro INTEGER .telProdNpMonInterfRouter.24.6.1.7 |
telProdNpMonInterfWlanWMMAckPolicyAck policy for this Access category (default value is 'ack(1)').ro Enumeration .telProdNpMonInterfRouter.24.6.1.8 |
telProdNpMonInterfWlanWMMACMACM (admission control) policy for this Access category i
(default value is 'disabled(2)').ro Enumeration .telProdNpMonInterfRouter.24.6.1.9 |
telProdNpMonInterfWlanClientTableDescribes a WLAN Client and the corresponding
settings SEQUENCE OF TelProdNpMonInterfWlanClientEntry .telProdNpMonInterfRouter.24.7 |
telProdNpMonInterfwlanClientEntryA base list of objects with information about the networks the
WLAN can connect to when acting as a client.
The indexes are the number of the WLAN interface and the network
index TelProdNpMonInterfWlanClientEntry .telProdNpMonInterfRouter.24.7.1 |
telProdNpMonInterfWlanClientIfIndexWLAN interface index.ro INTEGER .telProdNpMonInterfRouter.24.7.1.1 |
telProdNpMonInterfWlanClientSSIDThe Service Set Namero DisplayString (SNMPv2-TC) .telProdNpMonInterfRouter.24.7.1.2 |
telProdNpMonInterfWlanClientPriorityPriority of the network. The higher the priority,
the sooner the client tries to associate with it.ro Enumeration .telProdNpMonInterfRouter.24.7.1.3 |
telProdNpMonInterfWlanClientPrivInvokedPrivacy invoked. If enabled, some level of security is invoked
when transmitting data frames.ro Enumeration .telProdNpMonInterfRouter.24.7.1.4 |
telProdNpMonInterfWlanClientRsnThe Robust Security Network settings.ro Enumeration .telProdNpMonInterfRouter.24.7.1.5 |
telProdNpMonInterfWlanClientAkmThe Authenticated Key Management setting.ro Enumeration .telProdNpMonInterfRouter.24.7.1.6 |
telProdNpMonInterfWlanClientCipherThe ciphers in use for WPA or WPA2.
auto(1) is used for TKIP and AESro Enumeration .telProdNpMonInterfRouter.24.7.1.7 |
telProdNpMonInterfWlanClientDefaultKeyDefault key for WEP encryption. This is the key used
to transmit data frames if WEP is enabledro Enumeration .telProdNpMonInterfRouter.24.7.1.8 |
telProdNpMonInterfWlanClientKey1Key string for WEP key number 1.ro OCTET STRING .telProdNpMonInterfRouter.24.7.1.9 |
telProdNpMonInterfWlanClientKey2Key string for WEP key number 2.ro OCTET STRING .telProdNpMonInterfRouter.24.7.1.10 |
telProdNpMonInterfWlanClientKey3Key string for WEP key number 3.ro OCTET STRING .telProdNpMonInterfRouter.24.7.1.11 |
telProdNpMonInterfWlanClientKey4Key string for WEP key number 4.ro OCTET STRING .telProdNpMonInterfRouter.24.7.1.12 |
telProdNpMonInterfwlanClientPassPhrasePassphrase string for WPA-PSK and WPA2-PSK.ro OCTET STRING .telProdNpMonInterfRouter.24.7.1.13 |