TED-MIB
This MIB module contains managed object definitions for TED in support of MPLS/GMPLS TE Database. Copyright (c) 2013 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info).
Main OID:
tedMIB.1.3.6.1.2.1.10.273
80
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
80 total| Object Name |
|---|
tedMIBThis MIB module contains managed object definitions for TED in support of MPLS/GMPLS TE Database. Copyright (c) 2013 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info). MODULE-IDENTITY .1.3.6.1.2.1.10.273 |
tedNotifications OBJECT IDENTIFIER .1.3.6.1.2.1.10.273.0 |
tedStatusChangeThis notification signifies that there has been change in the TE information of tedTable, tedLocalIfAddrTable, tedRemoteIfAddrTable, tedSwCapTable, and/or tedSrlgTable. For example, this should be generated when tedUnreservedBandwidth is changed to create or delete LSP using the registered TE link. NOTIFICATION-TYPE .1.3.6.1.2.1.10.273.0.1 |
tedEntryCreatedThis notification signifies that there has been new registration in the TED table by receiving new TE link information. For example, this should be generated when a new index (tedLinkIndex) is registered in the TED table. NOTIFICATION-TYPE .1.3.6.1.2.1.10.273.0.2 |
tedEntryDeletedThis notification signifies that there has been deletion of an entry in the TED table. For example, this should be generated when one of the existing entries is deleted in the TED table. NOTIFICATION-TYPE .1.3.6.1.2.1.10.273.0.3 |
tedObjects OBJECT IDENTIFIER .1.3.6.1.2.1.10.273.1 |
tedTableThis table indicates multiple TED information, which has been supported by RFC 3630 and RFC 5305. SEQUENCE OF TedEntry .1.3.6.1.2.1.10.273.1.1 |
tedEntryThis entry contains TED information commonly utilized in both MPLS and GMPLS. TedEntry .1.3.6.1.2.1.10.273.1.1.1 |
tedLinkInformationSourceThis object indicates the source of the information about the TE link. Enumeration .1.3.6.1.2.1.10.273.1.1.1.1 |
tedLocalRouterIdThis object represents the Router ID of the router originating the LSA. If OSPF is used to advertise LSA, this represents a Router ID. If IS-IS is used, this represents a System ID. Otherwise, this represents zero. TedRouterIdTC .1.3.6.1.2.1.10.273.1.1.1.2 |
tedRemoteRouterIdThis object indicates the router at the remote end of the link from the originating router. If OSPF is used to advertise LSA, this represents a Link ID in the Link TLV. If IS-IS is used, this represents a neighbor System ID defined in RFC 5305. Otherwise, this represents zero. TedRouterIdTC .1.3.6.1.2.1.10.273.1.1.1.3 |
tedLinkIndexThis object indicates the link state identifier. If OSPF is used, this represents an ospfLsdbID. If IS-IS is used, this represents an isisLSPID. Otherwise, this represents a unique identifier within a node. TedLinkIndexTC .1.3.6.1.2.1.10.273.1.1.1.4 |
tedLinkInformationDataIf tedLinkInformationSource has the value unknown(0), this object MUST contain a value of zeroDotZero. If tedLinkInformationSource has the value locallyConfigured(1), an implementation can use this object to supply the identifier of the corresponding row entry in the teLinkTable of TE-LINK- STD-MIB (RFC 4220), the identifier of the corresponding row in a local proprietary TE link MIB module, or the value of zeroDotZero. If tedLinkInformationSource has the value ospfv2(2) and ospfv3(3), an implementation can use this object to supply the identifier of the corresponding row entry in the ospfLocalLsdbTable (OSPFv2-MIB) and the ospfv3AreaLsdbTable (OSPFv3-MIB), or the value of zeroDotZero. If tedLinkInformationSource has the value isis(4), an implementation can use this object to supply the identifier of the corresponding row entry in the isisAreaAddr of ISIS-MIB (RFC 4444), or the value of zeroDotZero. If tedLinkInformationSource has the value other(5), an implementation can use this object to supply the identifier of the corresponding row entry in the local proprietary MIB module, or the value of zeroDotZero.ro RowPointer (SNMPv2-TC) .1.3.6.1.2.1.10.273.1.1.1.5 |
tedLinkStateThis object represents the actual operational state of this TE link. For instance, if a row is created in the TED table, but the actual TE link is not available for some reason (e.g., when there is not yet a physical link or the link has been manually disabled), then the object would be down(2) state. In contrast, if a row is added and the TE link is available, this would be operationally up(1).ro Enumeration .1.3.6.1.2.1.10.273.1.1.1.6 |
tedAreaIdThis object indicates the area identifier of the IGP. If OSPF is used to advertise LSA, this represents an ospfArea. If IS-IS is used, this represents an area address. Otherwise, this represents zero.ro TedAreaIdTC .1.3.6.1.2.1.10.273.1.1.1.7 |
tedLinkTypeThis indicates the type of the link, such as point to point or multi-access.ro Enumeration .1.3.6.1.2.1.10.273.1.1.1.8 |
tedTeRouterIdAddrTypeThis object indicates the TE-Router ID address type. Only values unknown(0), ipv4(1), or ipv6(2) are supported.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.2.1.10.273.1.1.1.9 |
tedTeRouterIdAddrThis object indicates the TE-Router ID.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.2.1.10.273.1.1.1.10 |
tedLinkIdAddrTypeThis object indicates the address type of the TE Link ID. Only values unknown(0), ipv4(1), or ipv6(2) are supported.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.2.1.10.273.1.1.1.11 |
tedLinkIdAddrThis indicates the Router ID of the neighbor in the case of point-to-point links. This also indicates the interface address of the designated router in the case of multi-access links.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.2.1.10.273.1.1.1.12 |
tedMetricThis indicates the traffic engineering metric value of the TE link.ro Integer32 .1.3.6.1.2.1.10.273.1.1.1.13 |
tedMaxBandwidthThis indicates the maximum bandwidth that can be used on this link in this direction.ro Float32TC UNITS "Byte per second" .1.3.6.1.2.1.10.273.1.1.1.14 |
tedMaxReservableBandwidthThis indicates the maximum bandwidth that may be reserved on this link in this direction.ro Float32TC UNITS "Byte per second" .1.3.6.1.2.1.10.273.1.1.1.15 |
tedUnreservedBandwidthPri0This indicates the amount of bandwidth not yet reserved at the priority 0.ro Float32TC UNITS "Byte per second" .1.3.6.1.2.1.10.273.1.1.1.16 |
tedUnreservedBandwidthPri1This indicates the amount of bandwidth not yet reserved at the priority 1.ro Float32TC UNITS "Byte per second" .1.3.6.1.2.1.10.273.1.1.1.17 |
tedUnreservedBandwidthPri2This indicates the amount of bandwidth not yet reserved at the priority 2.ro Float32TC UNITS "Byte per second" .1.3.6.1.2.1.10.273.1.1.1.18 |
tedUnreservedBandwidthPri3This indicates the amount of bandwidth not yet reserved at the priority 3.ro Float32TC UNITS "Byte per second" .1.3.6.1.2.1.10.273.1.1.1.19 |
tedUnreservedBandwidthPri4This indicates the amount of bandwidth not yet reserved at the priority 4.ro Float32TC UNITS "Byte per second" .1.3.6.1.2.1.10.273.1.1.1.20 |
tedUnreservedBandwidthPri5This indicates the amount of bandwidth not yet reserved at the priority 5.ro Float32TC UNITS "Byte per second" .1.3.6.1.2.1.10.273.1.1.1.21 |
tedUnreservedBandwidthPri6This indicates the amount of bandwidth not yet reserved at the priority 6.ro Float32TC UNITS "Byte per second" .1.3.6.1.2.1.10.273.1.1.1.22 |
tedUnreservedBandwidthPri7This indicates the amount of bandwidth not yet reserved at the priority 7.ro Float32TC UNITS "Byte per second" .1.3.6.1.2.1.10.273.1.1.1.23 |
tedAdministrativeGroupThis indicates the Administrative Group to which the link belongs. Since the value is a bit mask, the link can belong to multiple groups. This is also called Resource Class/Color.ro Integer32 .1.3.6.1.2.1.10.273.1.1.1.24 |
tedLocalIdThis indicates the Link Local Identifier of an unnumbered link.ro Integer32 .1.3.6.1.2.1.10.273.1.1.1.25 |
tedRemoteIdThis indicates the Link Remote Identifier of an unnumbered link.ro Integer32 .1.3.6.1.2.1.10.273.1.1.1.26 |
tedLinkProtectionTypeThis object indicates the protection type of the TE link.ro Bits .1.3.6.1.2.1.10.273.1.1.1.27 |
tedLocalIfAddrTableThis table contains the IP address information of a local TE link. SEQUENCE OF TedLocalIfAddrEntry .1.3.6.1.2.1.10.273.1.2 |
tedLocalIfAddrEntryThis entry contains the IP address information of the local TE link. TedLocalIfAddrEntry .1.3.6.1.2.1.10.273.1.2.1 |
tedLocalIfAddrTypeThis object indicates the address type of the local TE link. Only values unknown(0), ipv4(1), or ipv6(2) have to be supported.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.2.1.10.273.1.2.1.1 |
tedLocalIfAddrThis object indicates the address of the local TE link. InetAddress .1.3.6.1.2.1.10.273.1.2.1.2 |
tedRemoteIfAddrTableThis table contains the IP address information of a remote TE link. SEQUENCE OF TedRemoteIfAddrEntry .1.3.6.1.2.1.10.273.1.3 |
tedRemoteIfAddrEntryThis entry contains the IP address information of the remote TE link. TedRemoteIfAddrEntry .1.3.6.1.2.1.10.273.1.3.1 |
tedRemoteIfAddrTypeThis object indicates the address type of the remote TE link.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.2.1.10.273.1.3.1.1 |
tedRemoteIfAddrThis object indicates the address of the remote TE link. InetAddress .1.3.6.1.2.1.10.273.1.3.1.2 |
tedSwCapTableThis table contains the GMPLS TED switching capability information. SEQUENCE OF TedSwCapEntry .1.3.6.1.2.1.10.273.1.4 |
tedSwCapEntryThis entry relates each TE link with its GMPLS TE switching capability information. If the MIB module deals with only OSPF- TE information, the value of each object related with GMPLS TE extensions should be null. TedSwCapEntry .1.3.6.1.2.1.10.273.1.4.1 |
tedSwCapIndexThis index is utilized to identify multiple switching functions on a local or remote TE link according to definitions of textual conventions of GMPLS, RFC 4801. Unsigned32 .1.3.6.1.2.1.10.273.1.4.1.1 |
tedSwCapTypeThis object indicates the GMPLS switching capability assigned to the TE link according to definitions of textual conventions of GMPLS, RFC 4801.ro IANAGmplsSwitchingTypeTC (IANA-GMPLS-TC-MIB) .1.3.6.1.2.1.10.273.1.4.1.2 |
tedSwCapEncodingThis object indicates the GMPLS encoding type assigned to the TE link.ro IANAGmplsLSPEncodingTypeTC (IANA-GMPLS-TC-MIB) .1.3.6.1.2.1.10.273.1.4.1.3 |
tedSwCapMaxLspBandwidthPri0This object indicates the maximum bandwidth of the TE link at the priority 0 for GMPLS LSP creation.ro Float32TC UNITS "Byte per second" .1.3.6.1.2.1.10.273.1.4.1.4 |
tedSwCapMaxLspBandwidthPri1This object indicates the maximum bandwidth of the TE link at the priority 1 for GMPLS LSP creation.ro Float32TC UNITS "Byte per second" .1.3.6.1.2.1.10.273.1.4.1.5 |
tedSwCapMaxLspBandwidthPri2This object indicates the maximum bandwidth of the TE link at the priority 2 for GMPLS LSP creation.ro Float32TC UNITS "Byte per second" .1.3.6.1.2.1.10.273.1.4.1.6 |
tedSwCapMaxLspBandwidthPri3This object indicates the maximum bandwidth of the TE link at the priority 3 for GMPLS LSP creation.ro Float32TC UNITS "Byte per second" .1.3.6.1.2.1.10.273.1.4.1.7 |
tedSwCapMaxLspBandwidthPri4This object indicates the maximum bandwidth of the TE link at the priority 4 for GMPLS LSP creation.ro Float32TC UNITS "Byte per second" .1.3.6.1.2.1.10.273.1.4.1.8 |
tedSwCapMaxLspBandwidthPri5This object indicates the maximum bandwidth of the TE link at the priority 5 for GMPLS LSP creation.ro Float32TC UNITS "Byte per second" .1.3.6.1.2.1.10.273.1.4.1.9 |
tedSwCapMaxLspBandwidthPri6This object indicates the maximum bandwidth of the TE link at the priority 6 for GMPLS LSP creation.ro Float32TC UNITS "Byte per second" .1.3.6.1.2.1.10.273.1.4.1.10 |
tedSwCapMaxLspBandwidthPri7This object indicates the maximum bandwidth of the TE link at the priority 7 for GMPLS LSP creation.ro Float32TC UNITS "Byte per second" .1.3.6.1.2.1.10.273.1.4.1.11 |
tedSwCapMinLspBandwidthThis object indicates the minimum bandwidth of the TE link for GMPLS LSP creation if the switching capability field is TDM, PSC-1, PSC-2, PSC-3, or PSC-4.ro Float32TC UNITS "Byte per second" .1.3.6.1.2.1.10.273.1.4.1.12 |
tedSwCapIfMtuThis object indicates the MTU of the local or remote TE link.ro Integer32 .1.3.6.1.2.1.10.273.1.4.1.13 |
tedSwCapIndicationThis object indicates whether the interface supports Standard or Arbitrary SONET/SDH.ro Enumeration .1.3.6.1.2.1.10.273.1.4.1.14 |
tedSrlgTableThis table contains the SRLG information of the TE link. SEQUENCE OF TedSrlgEntry .1.3.6.1.2.1.10.273.1.5 |
tedSrlgEntryThis entry relates each TE link with its SRLG information. TedSrlgEntry .1.3.6.1.2.1.10.273.1.5.1 |
tedSrlgIndexThis index is utilized to identify multiple SRLG values on a local or remote TE link. This object represents an arbitrary value, which is locally defined in a router. Unsigned32 .1.3.6.1.2.1.10.273.1.5.1.1 |
tedSrlgThis object indicates the SRLG value assigned to a local or remote TE link.ro Integer32 .1.3.6.1.2.1.10.273.1.5.1.2 |
tedStatusChangeNotificationMaxRateA lot of notifications relating to the status change are expected to generate in a node, especially when a network failure occurs and might cause a performance degradation of the node itself. To avoid such a defect, this object provides the maximum number of notifications generated per minute. If events occur more rapidly, the implementation may simply fail to emit these notifications during that period, or may queue them until an appropriate time. A value of 0 means no throttling is applied and events may be notified at the rate at which they occur.rw Unsigned32 .1.3.6.1.2.1.10.273.1.6 |
tedCreatedDeletedNotificationMaxRateA lot of notifications relating to new registration in the TED table by receiving new TE link information or deletion of existing entries in the TED table are expected to generate in a node. This object provides the maximum number of notifications generated per minute.rw Unsigned32 .1.3.6.1.2.1.10.273.1.7 |
tedConformance OBJECT IDENTIFIER .1.3.6.1.2.1.10.273.2 |
tedCompliances OBJECT IDENTIFIER .1.3.6.1.2.1.10.273.2.1 |
tedModuleFullComplianceCompliance statement for agents provides full support for the TED MIB. Unknown .1.3.6.1.2.1.10.273.2.1.1 |
tedModuleReadOnlyComplianceCompliance requirement for implementations only provides read- only support for TED. Such devices can then be monitored but cannot be configured using this MIB module. Unknown .1.3.6.1.2.1.10.273.2.1.2 |
tedGroups OBJECT IDENTIFIER .1.3.6.1.2.1.10.273.2.2 |
tedMainGroupCollection of objects for TED management Unknown .1.3.6.1.2.1.10.273.2.2.1 |
tedObjectsGroupThe objects needed to implement notification. Unknown .1.3.6.1.2.1.10.273.2.2.2 |
tedNotificationGroupThis group is mandatory for those implementations that can implement the notifications contained in this group. Unknown .1.3.6.1.2.1.10.273.2.2.3 |
tedUnnumberedLinkGroupThe objects needed to implement the unnumbered links. Unknown .1.3.6.1.2.1.10.273.2.2.4 |
tedNumberedLinkGroupThe objects needed to implement the numbered links. Unknown .1.3.6.1.2.1.10.273.2.2.5 |
tedSwCapGroupThe objects needed to implement the TE links with GMPLS TE switching capability information. Unknown .1.3.6.1.2.1.10.273.2.2.6 |
tedSwCapMinLspBandwidthGroupThe objects needed to implement the minimum bandwidth of the TE link for GMPLS LSP creation. Unknown .1.3.6.1.2.1.10.273.2.2.7 |
tedSwCapIfMtuGroupThe objects needed to implement the MTU information of the local or remote TE link. Unknown .1.3.6.1.2.1.10.273.2.2.8 |
tedSwCapIndicationGroupThe objects needed to implement the indication of whether the interface supports Standard or Arbitrary SONET/SDH. Unknown .1.3.6.1.2.1.10.273.2.2.9 |
tedSrlgGroupThe objects needed to implement multiple SRLG values with GMPLS TE information. Unknown .1.3.6.1.2.1.10.273.2.2.10 |