TCAv2-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
21
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
21 total| Object Name |
|---|
bellcore OBJECT IDENTIFIER .1.3.6.1.4.1.148 |
RFC1213-MIB Unknown .1.3.6.1.4.1.148 |
requirements OBJECT IDENTIFIER .1.3.6.1.4.1.148.1 |
tcaMIB OBJECT IDENTIFIER .1.3.6.1.4.1.148.1.5 |
tcaObjects OBJECT IDENTIFIER .1.3.6.1.4.1.148.1.5.1 |
tcaTableThe Threshold Crossing Alert table. SEQUENCE OF TcaEntry .1.3.6.1.4.1.148.1.5.1.1 |
tcaEntryAn entry in the Threshold Crossing Alert table. TcaEntry .1.3.6.1.4.1.148.1.5.1.1.1 |
tcaIfIndexThe value of this object is equal to MIB II's
ifIndex value for this interface sublayer
(ifEntry). INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.148.1.5.1.1.1.1 |
tcaIndexThe value of this object is used as one of the
indices for this table. It is a unique identifier
for this row in the table for this interface
(ifIndex). The value of this object can be from 1
to N, where N is the number of potential TCAs for
this interface sublayer (ifEntry). INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.148.1.5.1.1.1.2 |
tcaObjectThe value of this object is the OBJECT IDENTIFIER
of the counter object being thresholded. The
counter objects being thresholded are defined in
other MIB Modules.ro OBJECT IDENTIFIER .1.3.6.1.4.1.148.1.5.1.1.1.3 |
tcaObjectDescThe value of this object is a description of the
counter object being thresholded. For example,
DS1 Coding Violations.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.148.1.5.1.1.1.4 |
tcaThresholdThe value of this object is the threshold value
of the counter object being thresholded.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.148.1.5.1.1.1.5 |
tcaSampleTypeThe value of this object is the sample type of
the object being thresholded from the
perspective of the CNM or XA-OM customer.
This object can be used for the following
data types:
(a) Counters
(b) Counters measured over certain intervals,
where the Counters are reset to zero at the end
of the interval and as a result have the
syntax Gauge.
(c) Gauges (other than (b))
(d) (Enumerated) INTEGER
(e) (Enumerated) INTEGER that is used as a bitmap.
The enumerated values of this object apply to
these data types as follows:
| possible values |
data type | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
+-+-+-+-+
(a) Counter | | X | | | | | | |
(b) IntervalCounter | X | | | | | | | |
(c) Gauge | | | X | X | | | | |
(d) Enum INT | | | | | X | X | | |
(e) Enum INT(bitmap)| | | | | | | X | X |
+-+-+-+-+
(a) Counter values can only rise. An
alarm may be triggered when the value has
risen a delta amount within a sample period.
(b) IntervalCounter values can only rise within an
interval and are reset at the end of the
interval. An alarm may be triggered when
the value has exceeded an absolute value.
(c) A Gauge value may rise and fall. An alarm
may be triggered when the value has risen or
fallen a certain amount.
(d) An INTEGER may assume values in any sequence.
An alarm may be triggered when the value
does equal or doesnot equal a certain
specified value.
(e) A bitmap may assume values that represent
one or more bits to be set. An alarm may be
triggered when the value does include or not
include the combined value of certain bits.
Note that for (c), (d), and (e) only one alarm
needs to be generated, i.e., at first detection
of this event.ro Enumeration .1.3.6.1.4.1.148.1.5.1.1.1.6 |
tcaCountsThe value of this object is the number of times
the threshold was crossed for this counter object,
since sysUpTime was initialized or restarted.
This counter is a continuous counter. It should
be noted that as this object has a SYNTAX of
Counter, that it does not have a defined initial
value. However, it is recommended that this
object be initialized to zero.ro Counter .1.3.6.1.4.1.148.1.5.1.1.1.7 |
tcaTimeStampThe value of this object is equal to the value of
MIB-II's sysUpTime object at which last (latest)
threshold was crossed for this counter object.
The value of this object is set to zero at
(re)initialization.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.148.1.5.1.1.1.8 |
tcaTrapEnablerIndicates whether fyiTraps should be generated
for this threshold crossing count (tcaObject).
The physical layer counters' and gauges' (e.g.,
DS1, DS3, SONET, and PLCP) TCAs should have a
default value of disabled(2). The SMDS service
violations and higher layer protocol violations
counters' TCAs should have a default value of
enabled(1). A fyiTrap, when generated, shall have
the following varBind list: tcaObject,
tcaObjectDesc, tcaThreshold, and tcaTimeStamp.rw Enumeration .1.3.6.1.4.1.148.1.5.1.1.1.9 |
tcaConformance OBJECT IDENTIFIER .1.3.6.1.4.1.148.1.5.2 |
tcaGroups OBJECT IDENTIFIER .1.3.6.1.4.1.148.1.5.2.1 |
tcaGroup OBJECT IDENTIFIER .1.3.6.1.4.1.148.1.5.2.1.1 |
tcaCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.148.1.5.2.2 |
tcaCompliance OBJECT IDENTIFIER .1.3.6.1.4.1.148.1.5.2.2.1 |