TCAv1-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for TCAv1-MIB.
21
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
21 total| Object Name |
|---|
bellcore OBJECT IDENTIFIER .1.3.6.1.4.1.148 |
RFC1213-MIB Unknown .1.3.6.1.4.1.148 |
requirements OBJECT IDENTIFIER .1.3.6.1.4.1.148.1 |
tcaMIB OBJECT IDENTIFIER .1.3.6.1.4.1.148.1.5 |
tcaObjects OBJECT IDENTIFIER .1.3.6.1.4.1.148.1.5.1 |
tcaTableThe Threshold Crossing Alert table. SEQUENCE OF TcaEntry .1.3.6.1.4.1.148.1.5.1.1 |
tcaEntryAn entry in the Threshold Crossing Alert table. TcaEntry .1.3.6.1.4.1.148.1.5.1.1.1 |
tcaIfIndexThe value of this object is equal to MIB II's
ifIndex value for this interface sublayer (ifEntry).ro INTEGER .1.3.6.1.4.1.148.1.5.1.1.1.1 |
tcaIndexThe value of this object is used as one of the
indices for this table. It is a unique identifier
for this row in the table for this interface
(ifIndex). The value of this object can be from 1
to N, where N is the number of potential TCAs for
this interface sublayer (ifEntry).ro INTEGER .1.3.6.1.4.1.148.1.5.1.1.1.2 |
tcaObjectThe value of this object is the OBJECT IDENTIFIER
of the counter object being thresholded. The
counter objects being thresholded are defined in
other MIB Modules.ro OBJECT IDENTIFIER .1.3.6.1.4.1.148.1.5.1.1.1.3 |
tcaObjectDescThe value of this object is a description of the
counter object being thresholded. For example,
DS1 Coding Violations.ro DisplayString .1.3.6.1.4.1.148.1.5.1.1.1.4 |
tcaThresholdThe value of this object is the threshold value
of the counter object being thresholded.ro INTEGER .1.3.6.1.4.1.148.1.5.1.1.1.5 |
tcaSampleTypeThe value of this object is the sample type of
the counter object being thresholded from the
perspective of the CNM or XA-OM customer. All
counters are thresholded over a 15-minute
interval. However, over this 15-minute interval
the threshold value may be an absolute value
(e.g., used for interval counters) or a delta
value (e.g., used for continuous counters). The
intervals are measured locally at the agent, and
are not visible to the manager. At the agent's
local interval boundary, all threshold crossing
measurements are reset to zero. (A counter value
may cross the predefined threshold and a TCA is
sent only once within a 15-minute interval.)ro Enumeration .1.3.6.1.4.1.148.1.5.1.1.1.6 |
tcaCountsThe value of this object is the number of times
the threshold was crossed for this counter object,
since sysUpTime was initialized or restarted.
This counter is a continuous counter. It should
be noted that as this object has a SYNTAX of
Counter, that it does not have a defined initial
value. However, it is recommended that this
object be initialized to zero.ro Counter .1.3.6.1.4.1.148.1.5.1.1.1.7 |
tcaTimeStampThe value of this object is equal to the value of
MIB-II's sysUpTime object at which last (latest)
threshold was crossed for this counter object.
The value of this object is set to zero at
(re)initialization.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.148.1.5.1.1.1.8 |
tcaTrapEnablerIndicates whether an fyiTrap should be generated
for this threshold crossing count (tcaObject).
The physical layer counters' and gauges' (e.g.,
DS1, DS3, SONET, and PLCP) TCAs should have a
default value of disabled(2). The SMDS service
violations and higher layer protocol violations
counters' TCAs should have a default value of
enabled(1). A fyiTrap, when generated, shall have
the following varBind list:
tcaObject, tcaObjectDesc, tcaThreshold, and
tcaTimeStamp.rw Enumeration .1.3.6.1.4.1.148.1.5.1.1.1.9 |
tcaConformance OBJECT IDENTIFIER .1.3.6.1.4.1.148.1.5.2 |
tcaGroups OBJECT IDENTIFIER .1.3.6.1.4.1.148.1.5.2.1 |
tcaGroup OBJECT IDENTIFIER .1.3.6.1.4.1.148.1.5.2.1.1 |
tcaCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.148.1.5.2.2 |
tcaCompliance OBJECT IDENTIFIER .1.3.6.1.4.1.148.1.5.2.2.1 |
More MIBs from Bellcore
Browse all BellcoreMIBs →SMDS-Subscription-MIB
SNMP MIB module
164 objects→
Intercarrier-SMDS-MIB
Standard SNMP MIB module defining data structures for Intercarrier-SMDS-MIB.
103 objects→
ATM-Ext-MIB
Standard SNMP MIB module defining data structures for ATM-Ext-MIB.
27 objects→
TCAv2-MIB
Standard SNMP MIB module defining data structures for TCAv2-MIB.
21 objects→
INTERCARRIER-FR-MIB
The INTERCARRIER-FR-MIB provides standardizable management objects for monitoring Intercarrier Frame Relay network services, specifically tracking virtual circuit states, data transmission counters, and service-level parameters across multi-vendor Frame Relay infrastructure.
14 objects→
BellcoreTrapMIB
Standard SNMP MIB module defining data structures for BellcoreTrapMIB.
2 objects→