TBOP-OPT-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for TBOP-OPT-MIB.
58
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
58 total| Object Name |
|---|
codex OBJECT IDENTIFIER .1.3.6.1.4.1.449 |
RFC1155-SMI Unknown .1.3.6.1.4.1.449 |
cdxProductSpecific OBJECT IDENTIFIER .1.3.6.1.4.1.449.2 |
cdx6500 OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1 |
cdx6500Configuration OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2 |
cdx6500CfgProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2.1 |
cdx6500PCTPortProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2.1.1 |
cdx6500PPCTTBOPPortTableThis table contains TBOP Port configuration parameters. SEQUENCE OF Cdx6500PPCTTBOPPortEntry .1.3.6.1.4.1.449.2.1.2.1.1.7 |
cdx6500PPCTTBOPPortEntryEach PortEntry contains the configuration
parameters for one TBOP port. Cdx6500PPCTTBOPPortEntry .1.3.6.1.4.1.449.2.1.2.1.1.7.1 |
cdx6500TBOPCfgPortNumberPort number of the port being used by TBOP.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.7.1.1 |
cdx6500TBOPCfgPortEIAOptSpecifies the control signal handshake and clocking
required for a connection to be made to this port
legal values are :
simp - Simple, no control signals required.
dtr - Dedicated, require the data terminal ready
signal (DTR).
dtrd - Same as DTR, except data set ready (DSR)
drops between calls.
dtrp - Same as DTR, except DSR/DCD/CTS are held
low in the idle state.
newvalSimp - same functionality as 'simp', new enumeration
added for RFC1155 compatibility.
nc - Parameter not configured.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.7.1.2 |
cdx6500TBOPCfgPortClockTypeint - internal clock source.
ext - external clock source.
newval - same functionality as 'int', new enumeration
added for RFC1155 compatibility.
nc - parameter not configured.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.7.1.3 |
cdx6500TBOPCfgPortClockSpeedThis is the speed of the port in bits per second,
Clock Source = int. Legal Range=1200-384000.
A value 0 indicates parameter not configured.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.7.1.4 |
cdx6500TBOPCfgPortTxCodingThis is the data encoding used on the TBOP port.
nrz - Non Return to Zero.
nrzi - Non Return to Zero Inverted.
newvalNrz - same functionality as 'nrz', new enumeration
added for RFC1155 compatibility.
nc - Parameter not configured.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.7.1.5 |
cdx6500TBOPCfgPortByteCountThis is the number of bytes collected from the line
before data is forwarded. Legal values are :
128, 256, 384, 512, 640, 768, 896, 1036 and 1045.
A value 0 indicates the parameter is not configured.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.7.1.6 |
cdx6500TBOPCfgPortEIASigActionThis specifies the EIA signaling actions allowed on
the port:
NONE - none
SWITCH - switched carrier
CTS - raise CTS in response to RTS
A combination of CTS and SWITCH may be specified by summing
(e.g. SWITCH+CTS).
NC - Indicates the parameter not configued.ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.7.1.7 |
cdx6500TBOPCfgPortOptionsSelect options on this TBOP port as follows:
none - port uses flag idle between frame exchanges and
operates with as little as 2 idle flags between
frames.
marki - port uses mark idle between frame exchanges.
(Required by System 36 - AS/400 series).
cbr - for constant bit rate applications, the port operates
with as little as 1 idle flag between frames. Also,
if the outbound queue overflows, all frames on this
queue will be purged.
newvalNone - same functionality as 'none', new enumeration
added for RFC1155 compatibility.
nc - parameter not configured.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.7.1.8 |
cdx6500TBOPCfgPortRTSCTSDelayThis specifies how long the TBOP port will delay CTS
after RTS is raised when EIA Signaling Action = CTS.
The delay is specified in 50 milliseconds units
(1 = 50 milliseconds). Legal Range = 2-200.
A value 0 indicates parameter not configured.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.7.1.9 |
cdx6500TBOPCfgPortDcdOnDelayThis specifies the length of time that DCD is held
high before data is transmitted to the attached
device. This is used when EIA Signaling Action = SWITCH.
The delay is specified in milliseconds. Legal Range=1-255.
A value 0 indicates parameter not configured.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.7.1.10 |
cdx6500TBOPCfgPortAutoCallMnemThis mnemonic name is used for auto calling.ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.7.1.11 |
cdx6500TBOPCfgPortAutoCallTOThis is the time interval in seconds between call
attempts when auto calling.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.7.1.12 |
cdx6500TBOPCfgPortMaxAutoTriesThis specifies the number of times the TBOP port will
attempt to call. A value of 0 will allow unlimited attempts.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.7.1.13 |
cdx6500TBOPCfgPortSubAddressCalls addressed to this node, with this subaddress
will be routed to this TBOP port.ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.7.1.14 |
cdx6500TBOPCfgPortCUGThe TBOP port may be a member of up to 8 different
Closed User Groups. Each CUG membership must be a two
digit number (except
( e.g. 12,34,56,09,02,03 ).
00-99 - CUG Membershipro DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.7.1.15 |
cdx6500TBOPCfgPortEnableBillThis controls whether billing (accounting) records
will be created for calls on this TBOP port.
newvalOff - same functionality as 'off', new enumeration
added for RFC1155 compatibility.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.7.1.16 |
cdx6500TBOPCfgDimTypeThis controls the Interface Type.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.7.1.17 |
cdx6500TBOPCfgPortMaxRxQSizeThis parameter should be used with extreme caution. If using
a non-default value, it is assumed you have discussed your
application requirements with the manufacturer's support staff.
A non-default value may result in excessive consumption of buffers,
which can significantly impair the operation of all traffic over
the node. This parameter defines the maximum number of frames which
the inbound queue will contain. Frames are placed in this queue
when they cannot be forwarded to the network link. If pipelining
is enabled, this queue may contain frame segments. Therefore with
pipelining enabled, this queue will typicaly contain more entries
during network congestion. The default value of zero will result
in a queue size between 32 and 100 depending on available memory.
Legal Range=0,16-500. A value 501 indicates parameter not configured.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.7.1.18 |
cdx6500TBOPCfgPortMaxTxQSizeThis defines the maximum number of frames which the outbound
queue will contain. These frames are recombined frames, as
they were originaly received by the remote TBOP port.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.7.1.19 |
cdx6500TBOPCfgPortChanT1E1-ConnThis specifies whether a frame check sequence is generated for
transmitted frames and whether the frame check sequence is
stripped from received frames. It should be set to YES when
connecting to a virtual TBOP port which maps to a T1 or E1 port.
YES - Generate FCS for transmitted frames and
strip FCS from received frames.
NO - Don't generate FCS for transmitted frames or
strip FCS from received frames.
NC - Indicates the parameter not configured.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.7.1.20 |
cdx6500TBOPCfgPortIdleFlagCountThe Minimum number of Idle flags between frames.
If MARKi option is used, this should be greater
or equal to 2 and this many number of Idle flags
will be inserted between frames apart from Mark
Flag(FF)s. Legal Range = 1-15.
A value 0 indicates parameter not configured.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.7.1.21 |
cdx6500TBOPCfgPortElectricalInterfaceTypeSpecify the Electrical Interface Type:
V.24 - V.24 Electrical Interface Type
V.35 - V.35 Electrical Interface Type
V.36 - V.36 Electrical Interface Type
X.21 - X.21 Electrical Interface Type
NONE - Electrically disabledro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.7.1.22 |
cdx6500TBOPCfgPortV24ElectricalInterfaceOptionSpecify the Pin 22 option:
RI - V.24 uses Pin 22 for Ring Indicator output signal
TM - V.24 uses Pin 22 for Test Mode input signalro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.7.1.23 |
cdx6500TBOPCfgPortHighSpeedElectricalInterfaceOptionSpecify the cable type:
NONE - V.35/V.36/X.21 DCE with straight through cable
XOVER - V.35/V.36/X.21 DCE with crossover adapter cablero Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.7.1.24 |
cdx6500TBOPCfgPortMaxFrameSizeThis defines the maximum frame size which can be received
by TBOP. The frame size is defined as the total number of
octets in between flags. This parameter must be programmed
as an even value. Legal Range = 1036-16384.
A value 0 indicates the parameter not configured.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.7.1.25 |
cdx6500Statistics OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3 |
cdx6500StatProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3.1 |
cdx6500PSTPortProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3.1.1 |
cdx6500PPSTTBOPPortTableThis table holds statistics items for TBOP ports SEQUENCE OF Cdx6500PPSTTBOPPortEntry .1.3.6.1.4.1.449.2.1.3.1.1.7 |
cdx6500PPSTTBOPPortEntryThis entry holds the statistics items for one TBOP port. Cdx6500PPSTTBOPPortEntry .1.3.6.1.4.1.449.2.1.3.1.1.7.1 |
cdx6500TBOPStPortNumberThe port number for this TBOP entry.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.7.1.1 |
cdx6500TBOPStPortStatusSpecifies current port Status.
Up : Port is enabled by the CTP
Disabled : Port is disabled by CTP
Busy Out : The port is busy out by the CTP
Down : Port is not enabled disables, or busy
out by the CTP.
Note : Port Status indicates Down state only if
the TBOP port CMEM record entry portEnable
gets corrupted.ro DisplayString .1.3.6.1.4.1.449.2.1.3.1.1.7.1.2 |
cdx6500TBOPStPortStateThe EIA state of the port.ro DisplayString .1.3.6.1.4.1.449.2.1.3.1.1.7.1.3 |
cdx6500TBOPStPortSpeedThe measured port speed in bits per second.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.7.1.4 |
cdx6500TBOPStOverrunErrorsTotal number of overrun errors counted by the I/O driver.ro Counter16 .1.3.6.1.4.1.449.2.1.3.1.1.7.1.5 |
cdx6500TBOPStUnderrunErrorsTotal number of underrun errors counted by the I/O driver.ro Counter16 .1.3.6.1.4.1.449.2.1.3.1.1.7.1.6 |
cdx6500TBOPStCRCErrorsTotal number of CRC errors counted by the I/O driver.ro Counter16 .1.3.6.1.4.1.449.2.1.3.1.1.7.1.7 |
cdx6500TBOPStPortRxCharsTotal number of data characters received since last boot
or statistics reset, header characters are not included.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.7.1.8 |
cdx6500TBOPStPortRxCharsSecThe average number of characters received per second.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.7.1.9 |
cdx6500TBOPStPortRxFramesTotal number of SDLC frames received since last boot
or statistices reset.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.7.1.10 |
cdx6500TBOPStPortRxFramesSecThe average number of frames received per second.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.7.1.11 |
cdx6500TBOPStPortTxCharsTotal number of data characters transmitted since last boot
or statistics reset, header characters are not included.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.7.1.12 |
cdx6500TBOPStPortTxCharsSecThe average number of characters transmitted per second.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.7.1.13 |
cdx6500TBOPStPortTxFramesTotal number of SDLC frames trnsmitted since last boot or
statistics reset.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.7.1.14 |
cdx6500TBOPStPortTxFramesSecThe average number of frames transmitted per second.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.7.1.15 |
cdx6500TBOPStPortRxUtilPercentage of port receive bandwidth used.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.7.1.16 |
cdx6500TBOPStPortTxUtilPercentage of port transmit bandwidth used.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.7.1.17 |
cdx6500TBOPStPortFramesQueuedNumber of SDLC frames queued to the I/O drivers.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.7.1.18 |
cdx6500Controls OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.4 |