T1E1VG-OPT-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for T1E1VG-OPT-MIB.
98
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
98 total| Object Name |
|---|
codex OBJECT IDENTIFIER .1.3.6.1.4.1.449 |
RFC1155-SMI Unknown .1.3.6.1.4.1.449 |
cdxProductSpecific OBJECT IDENTIFIER .1.3.6.1.4.1.449.2 |
cdx6500 OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1 |
cdx6500Configuration OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2 |
cdx6500CfgGeneralGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2.2 |
cdx6500T1E1VGTableThis table contains the T1E1VG Configuration
parameters. SEQUENCE OF Cdx6500T1E1VGEntry .1.3.6.1.4.1.449.2.1.2.2.25 |
cdx6500T1E1VGEntryA T1E1VG Table Entry. Each entry
contains the configuration parameters for a single
T1E1VG Table. Cdx6500T1E1VGEntry .1.3.6.1.4.1.449.2.1.2.2.25.1 |
cdx6500T1E1VGCfgEntryNumberEntry number of the T1E1VG Table.ro INTEGER .1.3.6.1.4.1.449.2.1.2.2.25.1.1 |
cdx6500T1E1VGCfgInterfaceTypeThis is a T1E1VG having interface type.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.2.2.25.1.2 |
cdx6500T1E1VGCfgFormatThis parameter is used to select the format
of the T1E1VG interface.
vg-format-frational :DS0's are predefined by the TELCO or the User
vg-format-channelize :DS0 is predefined by the TELCO or the User
vg-format-isdn :DS0 is defined by the ISDN (Q.931) D-Channel
vg-format-ccs :DS0 is defined by the signalling channel (Voice).ro Enumeration .1.3.6.1.4.1.449.2.1.2.2.25.1.3 |
cdx6500T1E1VGCfgSwitchTypeThe ISDN switch type. This specifies the type of
equipment to which this span is connected.
The possible choices are:
ni2 : National ISDN version 2
5ess : AT&T 5ESS Switch
dms100 : Northern Telecom DMS-100 Switch
ntt : Nippon Telephone and Telegraph switch (Japan)
tso14 : AUSTEL Technical Standard 014 for Australia
etsi : Euro ISDN PRI (NET5)
qsig : ISDN QSIG PRI.ro Enumeration .1.3.6.1.4.1.449.2.1.2.2.25.1.4 |
cdx6500T1E1VGCfgUserNetworkSideThis parameter specifies whether the T1E1VG
is emulating the network or user side of the
ISDN network.
user : The T1 or E1 port is emulating the user,
ex. the T1 or E1 port is to be connected
to an ISDN network.
network : The T1 or E1 port is emulating the network,
ex. the T1 or E1 port is to be connected
to an ISDN PBX.ro Enumeration .1.3.6.1.4.1.449.2.1.2.2.25.1.5 |
cdx6500T1E1VGCfgDirectBchannelThis parameter specifies the direction of B-Channel
assignment on outbound calls made from this port.
high-to-low : B-Channels are selected starting with the highest
numbered available channel.
high-to-low : B-Channels are selected starting with the lowest
numbered available channel.ro Enumeration .1.3.6.1.4.1.449.2.1.2.2.25.1.6 |
cdx6500T1E1VGCfgBchRangeSpecify the B-Channel assignments that will be used
for the ISDN/QSIG calls.
Select Individual or Time Slot ranges, e.g. 1-3,10,13-15
will include Time Slots 1,2,3,10,13,14,15.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.2.2.25.1.7 |
cdx6500T1E1VGCfgCallAddrReplaceThis parameter is a PLACE HOLDER item.ro Enumeration .1.3.6.1.4.1.449.2.1.2.2.25.1.8 |
cdx6500T1E1VGCfgIsdnQsigOptThis parameter is a PLACE HOLDER item.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.2.2.25.1.9 |
cdx6500T1E1VGCfgFilteredIEThis parameter is a PLACE HOLDER item.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.2.2.25.1.10 |
cdx6500T1E1VGCfgReplIsdnQsigThis parameter is a PLACE HOLDER item.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.2.2.25.1.11 |
cdx6500T1E1VGCfgCallPartyNumTypeThis is the Calling/Called Party Number Type as defined by ITU-T
unknown - Unknown
international - International number
national - National number
subscriber - Subscriber number.ro Enumeration .1.3.6.1.4.1.449.2.1.2.2.25.1.12 |
cdx6500T1E1VGCfgCallPartyNumPlanThis is the Calling/Called Party Number Plan as defined by ITU-T
unknown - Unknown
iSDN - ISDN numbering plan (E.164)
telephony - Standard Telephone numbering plan
private - Private numbering plan.ro Enumeration .1.3.6.1.4.1.449.2.1.2.2.25.1.13 |
cdx6500T1E1VGCfg1stChanPort*Note that: This port must be configured as default.ro INTEGER .1.3.6.1.4.1.449.2.1.2.2.25.1.14 |
cdx6500T1E1VGCfg1stChanSlotSpecify the Time Slot assignments, 1 to 24 for T1 or 1 to 31 for E1.
Select Individual or Time Slot ranges, e.g. 1-3,10,13-15
will include Time Slots 1,2,3,10,13,14,15.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.2.2.25.1.15 |
cdx6500T1E1VGCfg1stChanDS0RateSpecify the DS0 Rate for T1.ro Enumeration .1.3.6.1.4.1.449.2.1.2.2.25.1.16 |
cdx6500T1E1VGCfg2ndChanPort0 : No Data activity on the Second FT1/FE1 Channel.
Port No.: Associated to the Second FT1/FE1 Channel.ro INTEGER .1.3.6.1.4.1.449.2.1.2.2.25.1.17 |
cdx6500T1E1VGCfg2ndChanSlotSpecify the Time Slot assignments, 1 to 24 for T1 or 1 to 31 for E1.
Select Individual or Time Slot ranges, e.g. 1-3,10,13-15
will include Time Slots 1,2,3,10,13,14,15.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.2.2.25.1.18 |
cdx6500T1E1VGCfg2ndChanDS0RateSpecify the DS0 Rate for T1.ro Enumeration .1.3.6.1.4.1.449.2.1.2.2.25.1.19 |
cdx6500T1E1VGCfg3rdChanPort0 : No Data activity on the Third FT1/FE1 Channel.
Port No.: Associated to the Third FT1/FE1 Channel.ro INTEGER .1.3.6.1.4.1.449.2.1.2.2.25.1.20 |
cdx6500T1E1VGCfg3rdChanSlotSpecify the Time Slot assignments, 1 to 24 for T1 or 1 to 31 for E1.
Select Individual or Time Slot ranges, e.g. 1-3,10,13-15
will include Time Slots 1,2,3,10,13,14,15.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.2.2.25.1.21 |
cdx6500T1E1VGCfg3rdChanDS0RateSpecify the DS0 Rate for T1.ro Enumeration .1.3.6.1.4.1.449.2.1.2.2.25.1.22 |
cdx6500T1E1VGCfgLineFramingTypeIndicate type of framing used by the DS1 circuit.
esf : Extended Super Frame
sf : Super Frame (Also known as D4 framing type)
e1 : D2048S or D2048U
e1-crc : D2048S with CRC
e1-crc-febe: D2048S with CRC and Si=FEBE.ro Enumeration .1.3.6.1.4.1.449.2.1.2.2.25.1.23 |
cdx6500T1E1VGCfgLineCodingSelects variety of zero suppression used on the T1 link.
ami : Alternate Mark Inversion.
b8zs : Bipolar 8 Zero Substitution.
hdb3 : High Density Bipolar 3ro Enumeration .1.3.6.1.4.1.449.2.1.2.2.25.1.24 |
cdx6500T1E1VGCfgTransmitClockSelects the source of the transmit clock.
int : Internal Oscillator.
rec : Received Timing.ro Enumeration .1.3.6.1.4.1.449.2.1.2.2.25.1.25 |
cdx6500T1E1VGCfgLineImpedanceSelects the line impedance as 75 ohms or 120 ohms.ro Enumeration .1.3.6.1.4.1.449.2.1.2.2.25.1.26 |
cdx6500T1E1VGCfgLineBuildOutSelect the Line Build Out to match the physical interface.
For DSX interfaces, this value is based on cable
0 - 0ft to 133ft
1 - 134ft to 266ft
2 - 267ft to 399ft
3 - 400ft to 533ft
4 - 534ft to 655ft
For DS1 interfaces, this value is based on the
0 - 0db
5 - -7.5db
6 - -15db
7 - -22.5db
4 - Not valid for DS1 interfacesro INTEGER .1.3.6.1.4.1.449.2.1.2.2.25.1.27 |
cdx6500T1E1VGCfgRecvSenseSelect HIGH (-36DB) if line is marginal.ro Enumeration .1.3.6.1.4.1.449.2.1.2.2.25.1.28 |
cdx6500T1E1VGCfgFacilityDataLinkThis describes the use of the facilities data link,
and may have the following capabilities:
none : indicates that the device does not use
the FDL.
ansi : refers to the FDL exchange recommended
by ANSI (Ansi-T1-403).
att : refers to ESF FDL exchanges (Att-54016).ro Enumeration .1.3.6.1.4.1.449.2.1.2.2.25.1.29 |
cdx6500T1E1VGCfgV54RecvRLBKenable : Respond to incoming V.54 loopback requests.
disable: Do not respond to incoming V.54 loopback requests.ro Enumeration .1.3.6.1.4.1.449.2.1.2.2.25.1.30 |
cdx6500T1E1VGCfgThresholdValueLESThreshold value of Line Errored Seconds (LESs)
to report alarms on CTP when exceeded.ro INTEGER .1.3.6.1.4.1.449.2.1.2.2.25.1.31 |
cdx6500T1E1VGCfgThresholdValueLCVThreshold value of Line Code Violations (LCVs)
to report alarms on CTP when exceeded.ro INTEGER .1.3.6.1.4.1.449.2.1.2.2.25.1.32 |
cdx6500T1E1VGCfgThresholdValuePCVThreshold value of Path Code Violations (PCVs)
to report alarms on CTP when exceeded.ro INTEGER .1.3.6.1.4.1.449.2.1.2.2.25.1.33 |
cdx6500T1E1VGCfgThresholdValueCSSThreshold value of Controlled Slip Seconds (CSSs)
to report alarms on CTP when exceeded.ro INTEGER .1.3.6.1.4.1.449.2.1.2.2.25.1.34 |
cdx6500T1E1VGCfgThresholdValueESThreshold value of Errored Seconds (ESs)
to report alarms on CTP when exceeded.ro INTEGER .1.3.6.1.4.1.449.2.1.2.2.25.1.35 |
cdx6500T1E1VGCfgThresholdValueBESThreshold value of Bursty Errored Seconds (BESs)
to report alarms on CTP when exceeded.ro INTEGER .1.3.6.1.4.1.449.2.1.2.2.25.1.36 |
cdx6500T1E1VGCfgThresholdValueSESThreshold value of Severely Errored Seconds (SESs)
to report alarms on CTP when exceeded.ro INTEGER .1.3.6.1.4.1.449.2.1.2.2.25.1.37 |
cdx6500T1E1VGCfgThresholdValueSEFSThreshold value of Severely Errored Framing Seconds (SEFSs)
to report alarms on CTP when exceeded.ro INTEGER .1.3.6.1.4.1.449.2.1.2.2.25.1.38 |
cdx6500T1E1VGCfgThresholdValueUASThreshold value of Unavailable Seconds (UASs)
to report alarms on CTP when exceeded.ro INTEGER .1.3.6.1.4.1.449.2.1.2.2.25.1.39 |
cdx6500T1E1VGCfgBchNumSchemeThis parameter specifies the B-Channel numbering scheme
used by the ISDN service provider.
1-31 : B-Channels are numbered 1 to 31.
1-30 : B-Channels are numbered 1 to 30.ro Enumeration .1.3.6.1.4.1.449.2.1.2.2.25.1.40 |
cdx6500Statistics OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3 |
cdx6500StatOtherStatsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3.2 |
cdx6500STT1E1VGGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3.2.15 |
cdx6500STT1E1VGTableThis table holds statistics information for T1E1VG. SEQUENCE OF Cdx6500STT1E1VGEntry .1.3.6.1.4.1.449.2.1.3.2.15.1 |
cdx6500STT1E1VGEntryEach entry contains statistics information for one T1E1VG interface. Cdx6500STT1E1VGEntry .1.3.6.1.4.1.449.2.1.3.2.15.1.1 |
cdx6500T1E1VGStatIfNumberA T1E1VG Stat Table Interface Number. Each interface
contains the configuration parameters for a single
T1E1VG Table.ro INTEGER .1.3.6.1.4.1.449.2.1.3.2.15.1.1.1 |
cdx6500T1E1VGStatInterfaceTypeThis parameter indicates the type of interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.2.15.1.1.2 |
cdx6500T1E1VGStatTimeSinceLastResetTime since last reset has happened for the interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.2.15.1.1.3 |
cdx6500T1E1VGStatAlarmStateTime since last reset has happened for the interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.2.15.1.1.4 |
cdx6500T1E1VGStatChannelStateThe status of or the interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.2.15.1.1.5 |
cdx6500T1E1VGStatTotal24HoursReportTableThis table holds a report of the cumulative sum
of the statistics for the previous 24 hour interval. SEQUENCE OF Cdx6500T1E1VGStatTotal24HoursReportEntry .1.3.6.1.4.1.449.2.1.3.2.15.2 |
cdx6500T1E1VGStatTotal24HoursReportEntryEach entry contains statistics information for one T1 port. Cdx6500T1E1VGStatTotal24HoursReportEntry .1.3.6.1.4.1.449.2.1.3.2.15.2.1 |
cdx6500T1E1VGStatTotal24HoursReportIfNumberInterface number of the T1E1VG.ro INTEGER .1.3.6.1.4.1.449.2.1.3.2.15.2.1.1 |
cdx6500T1E1VGStatTotal24HoursReportLESThe number of Line Errored Seconds (LESs)
encountered by the T1E1VG interface in the
previous 24 hour interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.2.15.2.1.2 |
cdx6500T1E1VGStatTotal24HoursReportLCVThe number of Line Code Violations (LCVs)
encountered by the T1E1VG interface in the
previous 24 hour interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.2.15.2.1.3 |
cdx6500T1E1VGStatTotal24HoursReportPCVThe number of Path Coding Violations (PCVs)
encountered by the T1E1VG interface in the
previous 24 hour interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.2.15.2.1.4 |
cdx6500T1E1VGStatTotal24HoursReportCSSThe number of Controlled Slip Seconds (CSSs)
encountered by the T1E1VG interface in the
previous 24 hour interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.2.15.2.1.5 |
cdx6500T1E1VGStatTotal24HoursReportESThe number of Errored Seconds (ESs)
encountered by the T1E1VG interface in the
previous 24 hour interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.2.15.2.1.6 |
cdx6500T1E1VGStatTotal24HoursReportBESThe number of Bursty Errored Seconds (BESs)
encountered by the T1E1VG interface in the
previous 24 hour interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.2.15.2.1.7 |
cdx6500T1E1VGStatTotal24HoursReportSESThe number of Severely Errored Seconds (SESs)
encountered by the T1E1VG interface in the
previous 24 hour interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.2.15.2.1.8 |
cdx6500T1E1VGStatTotal24HoursReportSEFSThe number of Severely Errored Framing Seconds (SEFSs)
encountered by the T1E1VG interface in the previous
24 hour interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.2.15.2.1.9 |
cdx6500T1E1VGStatTotal24HoursReportUASThe number of Unavailable Seconds (UASs)
encountered by the T1E1VG interface in the
previous 24 hour interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.2.15.2.1.10 |
cdx6500T1E1VGStatCurrent15MinutesReportTableThis table holds a report of the statistics for the
current 15 minutes interval. SEQUENCE OF Cdx6500T1E1VGStatCurrent15MinutesReportEntry .1.3.6.1.4.1.449.2.1.3.2.15.3 |
cdx6500T1E1VGStatCurrent15MinutesReportEntryEach entry contains statistics information for one T1E1VG Interface. Cdx6500T1E1VGStatCurrent15MinutesReportEntry .1.3.6.1.4.1.449.2.1.3.2.15.3.1 |
cdx6500T1E1VGStatCurrent15MinutesReportIfNumberInterface number of the T1E1VG.ro INTEGER .1.3.6.1.4.1.449.2.1.3.2.15.3.1.1 |
cdx6500T1E1VGStatCurrent15MinutesReportTimeElapsedThe time that has elapsed since the beginning
of the current 15 minutes interval.ro INTEGER .1.3.6.1.4.1.449.2.1.3.2.15.3.1.2 |
cdx6500T1E1VGStatCurrent15MinutesReportLESThe number of Line Errored Seconds (LESs)
encountered by the T1E1VG interface in the
current 15 minute interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.2.15.3.1.3 |
cdx6500T1E1VGStatCurrent15MinutesReportLCVThe number of Line Code Violations (LCVs)
encountered by the T1E1VG interface in the
current 15 minute interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.2.15.3.1.4 |
cdx6500T1E1VGStatCurrent15MinutesReportPCVThe number of Path Coding Violations (PCVs)
encountered by the T1E1VG interface in the
current 15 minute interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.2.15.3.1.5 |
cdx6500T1E1VGStatCurrent15MinutesReportCSSThe number of Controlled Slip Seconds (CSSs)
encountered by the T1E1VG interface in the
current 15 minute interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.2.15.3.1.6 |
cdx6500T1E1VGStatCurrent15MinutesReportESThe number of Errored Seconds (ESs)
encountered by the T1E1VG interface in the
current 15 minute interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.2.15.3.1.7 |
cdx6500T1E1VGStatCurrent15MinutesReportBESThe number of Bursty Errored Seconds (BESs)
encountered by the T1E1VG interface in the
current 15 minute interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.2.15.3.1.8 |
cdx6500T1E1VGStatCurrent15MinutesReportSESThe number of Severely Errored Seconds (SESs)
encountered by the T1E1VG interface in the
current 15 minute interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.2.15.3.1.9 |
cdx6500T1E1VGStatCurrent15MinutesReportSEFSThe number of Severely Errored Framing Seconds (SEFSs)
encountered by the T1E1VG interface in the current
15 minute interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.2.15.3.1.10 |
cdx6500T1E1VGStatCurrent15MinutesReportUASThe number of Unavailable Seconds (UASs)
encountered by the T1E1VG interface in the
current 15 minute interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.2.15.3.1.11 |
cdx6500T1E1VGStatT1ChannelStateTableThe Channel State Table contains the current
RX Channel state of the Configured DS0 Channels. SEQUENCE OF Cdx6500T1StatT1ChannelStateEntry .1.3.6.1.4.1.449.2.1.3.2.15.4 |
cdx6500T1E1VGStatT1ChannelStateEntryAn Entry in the ABCD State Table. Cdx6500T1StatT1ChannelStateEntry .1.3.6.1.4.1.449.2.1.3.2.15.4.1 |
cdx6500T1E1VGStatT1ChannelStateIfNumberInterface number of the configured T1 channel.ro INTEGER .1.3.6.1.4.1.449.2.1.3.2.15.4.1.1 |
cdx6500T1E1VGStatT1ChannelStateABCDNumberABCD number of the configured T1 channel.ro INTEGER .1.3.6.1.4.1.449.2.1.3.2.15.4.1.2 |
cdx6500T1E1VGStatT1ChannelStateCurrentRxStateCurrent RX Channel state of the configured T1 channels.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.2.15.4.1.3 |
cdx6500T1E1VGStatE1ABCDStateTableThe ABCD State Table contains the current
RX ABCD state of the Configured DS0 Channels. SEQUENCE OF Cdx6500T1E1VGStatE1ABCDStateEntry .1.3.6.1.4.1.449.2.1.3.2.15.5 |
cdx6500T1E1VGStatE1ABCDStateEntryAn Entry in the ABCD State Table. Cdx6500T1E1VGStatE1ABCDStateEntry .1.3.6.1.4.1.449.2.1.3.2.15.5.1 |
cdx6500T1E1VGStatE1ABCDStateIfNumberInterface number of the configured E1 channel.ro INTEGER .1.3.6.1.4.1.449.2.1.3.2.15.5.1.1 |
cdx6500T1E1VGStatE1ABCDStateChannelNumberChannel number of the configured E1 channel.ro INTEGER .1.3.6.1.4.1.449.2.1.3.2.15.5.1.2 |
cdx6500T1E1VGStatE1ABCDStateCurrentRxStateCurrent RX ABCD state of the configured E1 channels.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.2.15.5.1.3 |
cdx6500Controls OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.4 |
cdx6500ContT1E1VGTable OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.4.19 |
cdx6500T1E1VGContEntryEach control applies to a single T1E1VG Interface. Cdx6500T1E1VGContEntry .1.3.6.1.4.1.449.2.1.4.19.1 |
t1e1vgContIfNumberInterface number of the T1E1VG. INTEGER .1.3.6.1.4.1.449.2.1.4.19.1.1 |
t1e1vgContIfBootBoot operations for the specified T1E1VG.
boot : Boots the T1E1VG Interface
noboot : Do not Boots the T1E1VG Interface.rw Enumeration .1.3.6.1.4.1.449.2.1.4.19.1.2 |