T1E1TG-OPT-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for T1E1TG-OPT-MIB.
94
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
94 total| Object Name |
|---|
codex OBJECT IDENTIFIER .1.3.6.1.4.1.449 |
RFC1155-SMI Unknown .1.3.6.1.4.1.449 |
cdxProductSpecific OBJECT IDENTIFIER .1.3.6.1.4.1.449.2 |
cdx6500 OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1 |
cdx6500Configuration OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2 |
cdx6500CfgProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2.1 |
cdx6500PCTPortProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2.1.1 |
cdx6500PCTT1E1TGPortTableThis table contains the T1E1TGPort Configuration
parameters. SEQUENCE OF Cdx6500PCTT1E1TGEntry .1.3.6.1.4.1.449.2.1.2.1.1.34 |
cdx6500PCTT1E1TGPortEntryA T1E1TGPort Table Entry. Each entry
contains the configuration parameters for a single
T1E1TGPort Table. Cdx6500PCTT1E1TGEntry .1.3.6.1.4.1.449.2.1.2.1.1.34.1 |
cdx6500T1E1TGCfgPortNumberPort number of the T1E1TG Port.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.34.1.1 |
cdx6500T1E1TGCfgInterfaceTypeThis is a T1E1TG having interface type.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.2.1.1.34.1.2 |
cdx6500T1E1TGCfgFormatThis parameter is used to select the format
of the T1E1TG interface.
vg-format-frational :DS0's are predefined by the TELCO or the User
vg-format-channelize :DS0 is predefined by the TELCO or the User
vg-format-isdn :DS0 is defined by the ISDN (Q.931) D-Channel
vg-format-ccs :DS0 is defined by the signalling channel (Voice).ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.34.1.3 |
cdx6500T1E1TGCfgSwitchTypeThe ISDN switch type. This specifies the type of
equipment to which this span is connected.
The possible choices are:
ni2 : National ISDN version 2
5ess : AT&T 5ESS Switch
dms100 : Northern Telecom DMS-100 Switch
ntt : Nippon Telephone and Telegraph switch (Japan)
tso14 : AUSTEL Technical Standard 014 for Australia
etsi : Euro ISDN PRI (NET5)
qsig : ISDN QSIG PRI.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.34.1.4 |
cdx6500T1E1TGCfgUserNetworkSideThis parameter specifies whether the T1E1TG
is emulating the network or user side of the
ISDN network.
user : The T1 or E1 port is emulating the user,
ex. the T1 or E1 port is to be connected
to an ISDN network.
network : The T1 or E1 port is emulating the network,
ex. the T1 or E1 port is to be connected
to an ISDN PBX.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.34.1.5 |
cdx6500T1E1TGCfgDirectBchannelThis parameter specifies the direction of B-Channel
assignment on outbound calls made from this port.
high-to-low : B-Channels are selected starting with the highest
numbered available channel.
high-to-low : B-Channels are selected starting with the lowest
numbered available channel.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.34.1.6 |
cdx6500T1E1TGCfgBchNumSchemeThis parameter specifies the B-Channel numbering scheme
used by the ISDN service provider.
1-31 : B-Channels are numbered 1 to 31.
1-30 : B-Channels are numbered 1 to 30.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.34.1.7 |
cdx6500T1E1TGCfgBchRangeSpecify the B-Channel assignments that will be used
for the ISDN/QSIG calls.
Select Individual or Time Slot ranges, e.g. 1-3,10,13-15
will include Time Slots 1,2,3,10,13,14,15.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.2.1.1.34.1.8 |
cdx6500T1E1TGCfgCallAddrReplaceSpecifies the rules for Calling Number replacement for ISDN/QSIG
voice calls. If the Calling Number is to be replaced, the new number
comes from the Virtual Port's Local Subscriber Directory Number,
specified in the Virtual Port Mapping Table.
NONE - No replacement
RX - For an incoming call replace the Calling Number
TX - For an outgoing call replace the Calling Number
RX-ONLY - For an incoming call replace the Calling Number only
TX-ONLY - For an outgoing call replace the Calling Number only.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.2.1.1.34.1.9 |
cdx6500T1E1TGCfgIsdnQsigOptThis parameter is a PLACE HOLDER item.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.2.1.1.34.1.10 |
cdx6500T1E1TGCfgFilteredIEThis parameter is a PLACE HOLDER item.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.2.1.1.34.1.11 |
cdx6500T1E1TGCfgReplIsdnQsigThis parameter is a PLACE HOLDER item.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.2.1.1.34.1.12 |
cdx6500T1E1TGCfgCallPartyNumTypeThis is the Calling/Called Party Number Type as defined by ITU-T
unknown - Unknown
international - International number
national - National number
subscriber - Subscriber number.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.34.1.13 |
cdx6500T1E1TGCfgCallPartyNumPlanThis is the Calling/Called Party Number Plan as defined by ITU-T
unknown - Unknown
iSDN - ISDN numbering plan (E.164)
telephony - Standard Telephone numbering plan
private - Private numbering plan.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.34.1.14 |
cdx6500T1E1TGCfgLineFramingTypeIndicate type of framing used by the DS1 circuit.
esf : Extended Super Frame
sf : Super Frame (Also known as D4 framing type)
e1 : D2048S or D2048U
e1-crc : D2048S with CRC
e1-crc-febe: D2048S with CRC and Si=FEBE.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.34.1.15 |
cdx6500T1E1TGCfgLineCodingSelects variety of zero suppression used on the T1 link.
ami : Alternate Mark Inversion.
b8zs : Bipolar 8 Zero Substitution.
hdb3 : High Density Bipolar 3ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.34.1.16 |
cdx6500T1E1TGCfgClockPriorityPriority of the received clock to become source of Group,
Card or System clock.
HIGH : High prority
MEDIUM : Medium priority
LOW : Low priorityro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.34.1.17 |
cdx6500T1E1TGCfgLineImpedanceSelects the line impedance as 75 ohms or 120 ohms.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.34.1.18 |
cdx6500T1E1TGCfgLineBuildOutSelect the Line Build Out to match the physical interface.
For DSX interfaces, this value is based on cable
0 - 0ft to 133ft
1 - 134ft to 266ft
2 - 267ft to 399ft
3 - 400ft to 533ft
4 - 534ft to 655ft
For DS1 interfaces, this value is based on the
0 - 0db
5 - -7.5db
6 - -15db
7 - -22.5db
4 - Not valid for DS1 interfacesro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.34.1.19 |
cdx6500T1E1TGCfgRecvSenseSelect HIGH (-36DB) if line is marginal.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.34.1.20 |
cdx6500T1E1TGCfgFacilityDataLinkThis describes the use of the facilities data link,
and may have the following capabilities:
none : indicates that the device does not use
the FDL.
ansi : refers to the FDL exchange recommended
by ANSI (Ansi-T1-403).
att : refers to ESF FDL exchanges (Att-54016).ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.34.1.21 |
cdx6500T1E1TGCfgV54RecvRLBKenable : Respond to incoming V.54 loopback requests.
disable: Do not respond to incoming V.54 loopback requests.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.34.1.22 |
cdx6500T1E1TGCfgThresholdValueLESThreshold value of Line Errored Seconds (LESs)
to report alarms on CTP when exceeded.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.34.1.23 |
cdx6500T1E1TGCfgThresholdValueLCVThreshold value of Line Code Violations (LCVs)
to report alarms on CTP when exceeded.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.34.1.24 |
cdx6500T1E1TGCfgThresholdValuePCVThreshold value of Path Code Violations (PCVs)
to report alarms on CTP when exceeded.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.34.1.25 |
cdx6500T1E1TGCfgThresholdValueCSSThreshold value of Controlled Slip Seconds (CSSs)
to report alarms on CTP when exceeded.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.34.1.26 |
cdx6500T1E1TGCfgThresholdValueESThreshold value of Errored Seconds (ESs)
to report alarms on CTP when exceeded.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.34.1.27 |
cdx6500T1E1TGCfgThresholdValueBESThreshold value of Bursty Errored Seconds (BESs)
to report alarms on CTP when exceeded.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.34.1.28 |
cdx6500T1E1TGCfgThresholdValueSESThreshold value of Severely Errored Seconds (SESs)
to report alarms on CTP when exceeded.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.34.1.29 |
cdx6500T1E1TGCfgThresholdValueSEFSThreshold value of Severely Errored Framing Seconds (SEFSs)
to report alarms on CTP when exceeded.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.34.1.30 |
cdx6500T1E1TGCfgThresholdValueUASThreshold value of Unavailable Seconds (UASs)
to report alarms on CTP when exceeded.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.34.1.31 |
cdx6500CfgGeneralGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2.2 |
cdx6500Statistics OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3 |
cdx6500StatProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3.1 |
cdx6500PSTPortProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3.1.1 |
cdx6500PSTT1E1TGPortTable OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3.1.1.35 |
cdx6500PSTT1E1TGTableThis table holds statistics information for T1E1TG. SEQUENCE OF Cdx6500PSTT1E1TGEntry .1.3.6.1.4.1.449.2.1.3.1.1.35.1 |
cdx6500PSTT1E1TGEntryEach entry contains statistics information for one T1E1TG interface. Cdx6500PSTT1E1TGEntry .1.3.6.1.4.1.449.2.1.3.1.1.35.1.1 |
cdx6500T1E1TGStatPortNumberA T1E1TG Stat Table Port Number. Each Port
contains the configuration parameters for a single
T1E1TG Table.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.35.1.1.1 |
cdx6500T1E1TGStatInterfaceTypeThis parameter indicates the type of interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.1.35.1.1.2 |
cdx6500T1E1TGStatTimeSinceLastResetTime since last reset has happened for the interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.1.35.1.1.3 |
cdx6500T1E1TGStatAlarmStateTime since last reset has happened for the interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.1.35.1.1.4 |
cdx6500PSTT1E1TGStatTotal24HoursReportTableThis table holds a report of the cumulative sum
of the statistics for the previous 24 hour interval. SEQUENCE OF Cdx6500PSTT1E1TGStatTotal24HoursReportEntry .1.3.6.1.4.1.449.2.1.3.1.1.35.2 |
cdx6500PSTT1E1TGStatTotal24HoursReportEntryEach entry contains statistics information for one T1 port. Cdx6500PSTT1E1TGStatTotal24HoursReportEntry .1.3.6.1.4.1.449.2.1.3.1.1.35.2.1 |
cdx6500T1E1TGStatTotal24HoursReportPortNumberPort number of the T1E1TG.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.35.2.1.1 |
cdx6500T1E1TGStatTotal24HoursReportLESThe number of Line Errored Seconds (LESs)
encountered by the T1E1TG interface in the
previous 24 hour interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.35.2.1.2 |
cdx6500T1E1TGStatTotal24HoursReportLCVThe number of Line Code Violations (LCVs)
encountered by the T1E1TG interface in the
previous 24 hour interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.35.2.1.3 |
cdx6500T1E1TGStatTotal24HoursReportPCVThe number of Path Coding Violations (PCVs)
encountered by the T1E1TG interface in the
previous 24 hour interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.35.2.1.4 |
cdx6500T1E1TGStatTotal24HoursReportCSSThe number of Controlled Slip Seconds (CSSs)
encountered by the T1E1TG interface in the
previous 24 hour interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.35.2.1.5 |
cdx6500T1E1TGStatTotal24HoursReportESThe number of Errored Seconds (ESs)
encountered by the T1E1TG interface in the
previous 24 hour interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.35.2.1.6 |
cdx6500T1E1TGStatTotal24HoursReportBESThe number of Bursty Errored Seconds (BESs)
encountered by the T1E1TG interface in the
previous 24 hour interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.35.2.1.7 |
cdx6500T1E1TGStatTotal24HoursReportSESThe number of Severely Errored Seconds (SESs)
encountered by the T1E1TG interface in the
previous 24 hour interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.35.2.1.8 |
cdx6500T1E1TGStatTotal24HoursReportSEFSThe number of Severely Errored Framing Seconds (SEFSs)
encountered by the T1E1TG interface in the previous
24 hour interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.35.2.1.9 |
cdx6500T1E1TGStatTotal24HoursReportUASThe number of Unavailable Seconds (UASs)
encountered by the T1E1TG interface in the
previous 24 hour interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.35.2.1.10 |
cdx6500PSTT1E1TGStatCurrent15MinutesReportTableThis table holds a report of the statistics for the
current 15 minutes interval. SEQUENCE OF Cdx6500PSTT1E1TGStatCurrent15MinutesReportEntry .1.3.6.1.4.1.449.2.1.3.1.1.35.3 |
cdx6500PSTT1E1TGStatCurrent15MinutesReportEntryEach entry contains statistics information for one T1E1TG Interface. Cdx6500PSTT1E1TGStatCurrent15MinutesReportEntry .1.3.6.1.4.1.449.2.1.3.1.1.35.3.1 |
cdx6500T1E1TGStatCurrent15MinutesReportPortNumberPort number of the T1E1TG.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.35.3.1.1 |
cdx6500T1E1TGStatCurrent15MinutesReportTimeElapsedThe time that has elapsed since the beginning
of the current 15 minutes interval.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.35.3.1.2 |
cdx6500T1E1TGStatCurrent15MinutesReportLESThe number of Line Errored Seconds (LESs)
encountered by the T1E1TG interface in the
current 15 minute interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.35.3.1.3 |
cdx6500T1E1TGStatCurrent15MinutesReportLCVThe number of Line Code Violations (LCVs)
encountered by the T1E1TG interface in the
current 15 minute interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.35.3.1.4 |
cdx6500T1E1TGStatCurrent15MinutesReportPCVThe number of Path Coding Violations (PCVs)
encountered by the T1E1TG interface in the
current 15 minute interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.35.3.1.5 |
cdx6500T1E1TGStatCurrent15MinutesReportCSSThe number of Controlled Slip Seconds (CSSs)
encountered by the T1E1TG interface in the
current 15 minute interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.35.3.1.6 |
cdx6500T1E1TGStatCurrent15MinutesReportESThe number of Errored Seconds (ESs)
encountered by the T1E1TG interface in the
current 15 minute interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.35.3.1.7 |
cdx6500T1E1TGStatCurrent15MinutesReportBESThe number of Bursty Errored Seconds (BESs)
encountered by the T1E1TG interface in the
current 15 minute interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.35.3.1.8 |
cdx6500T1E1TGStatCurrent15MinutesReportSESThe number of Severely Errored Seconds (SESs)
encountered by the T1E1TG interface in the
current 15 minute interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.35.3.1.9 |
cdx6500T1E1TGStatCurrent15MinutesReportSEFSThe number of Severely Errored Framing Seconds (SEFSs)
encountered by the T1E1TG interface in the current
15 minute interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.35.3.1.10 |
cdx6500T1E1TGStatCurrent15MinutesReportUASThe number of Unavailable Seconds (UASs)
encountered by the T1E1TG interface in the
current 15 minute interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.35.3.1.11 |
cdx6500PSTT1E1TGStatIntervalReportTableThe T1E1 Interval Table contains various
statistics collected by each T1E1 Interface over
the previous 24 hours of operation. The past 24
hours are broken into 96 completed 15 minute
intervals. SEQUENCE OF Cdx6500PSTT1E1TGStatIntervalReportEntry .1.3.6.1.4.1.449.2.1.3.1.1.35.4 |
cdx6500PSTT1E1TGStatIntervalReportEntryEach entry contains statistics information for one T1E1TG Interface. Cdx6500PSTT1E1TGStatIntervalReportEntry .1.3.6.1.4.1.449.2.1.3.1.1.35.4.1 |
cdx6500T1E1TGStatIntervalReportPortNumberThe index which identifies the Port number of the T1E1.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.35.4.1.1 |
cdx6500T1E1TGStatIntervalNumberA number between 1 and 96, where 1 is the most
recently completed 15 minute interval and 96 is
the 15 minutes interval completed 23 hours and 45
minutes prior to interval 1.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.35.4.1.2 |
cdx6500T1E1TGStatIntervalReportLESThe number of Line Errored Seconds (LESs)
encountered by the T1E1TG interface in the
15 minute interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.35.4.1.3 |
cdx6500T1E1TGStatIntervalReportLCVThe number of Line Code Violations (LCVs)
encountered by the T1E1TG interface in the
15 minute interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.35.4.1.4 |
cdx6500T1E1TGStatIntervalReportPCVThe number of Path Coding Violations (PCVs)
encountered by the T1E1TG interface in the
15 minute interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.35.4.1.5 |
cdx6500T1E1TGStatIntervalReportCSSThe number of Controlled Slip Seconds (CSSs)
encountered by the T1E1TG interface in the
15 minute interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.35.4.1.6 |
cdx6500T1E1TGStatIntervalReportESThe number of Errored Seconds (ESs)
encountered by the T1E1TG interface in the
15 minute interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.35.4.1.7 |
cdx6500T1E1TGStatIntervalReportBESThe number of Bursty Errored Seconds (BESs)
encountered by the T1E1TG interface in the
15 minute interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.35.4.1.8 |
cdx6500T1E1TGStatIntervalReportSESThe number of Severely Errored Seconds (SESs)
encountered by the T1E1TG interface in the
15 minute interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.35.4.1.9 |
cdx6500T1E1TGStatIntervalReportSEFSThe number of Severely Errored Framing Seconds (SEFSs)
encountered by the T1E1TG interface in the
15 minute interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.35.4.1.10 |
cdx6500T1E1TGStatIntervalReportUASThe number of Unavailable Seconds (UASs)
encountered by the T1E1TG interface in the
15 minute interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.35.4.1.11 |
cdx6500Controls OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.4 |
cdx6500ContT1E1TGTable OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.4.22 |
cdx6500T1E1TGContEntryEach control applies to a single T1E1TG Port. Cdx6500T1E1TGContEntry .1.3.6.1.4.1.449.2.1.4.22.1 |
t1e1tgContPortNumberPort number of the T1E1TG. INTEGER .1.3.6.1.4.1.449.2.1.4.22.1.1 |
t1e1tgContPortBootBoot operations for the specified T1E1TG Port.
boot : Boots the T1E1TG Port
noboot : Do not Boots the T1E1TG Port.rw Enumeration .1.3.6.1.4.1.449.2.1.4.22.1.2 |