T1E1-OPT-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for T1E1-OPT-MIB.
27
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
27 total| Object Name |
|---|
codex OBJECT IDENTIFIER .1.3.6.1.4.1.449 |
RFC1155-SMI Unknown .1.3.6.1.4.1.449 |
cdxProductSpecific OBJECT IDENTIFIER .1.3.6.1.4.1.449.2 |
cdx6500 OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1 |
cdx6500Configuration OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2 |
cdx6500CfgProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2.1 |
cdx6500PCTPortProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2.1.1 |
cdx6500PCTT1E1PortTable OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2.1.1.24 |
cdx6500VPCTT1E1PortTableThis table contains the T1/E1 Virtual Port Mapping
Table parameters. SEQUENCE OF Cdx6500VPCTT1E1PortEntry .1.3.6.1.4.1.449.2.1.2.1.1.24.3 |
cdx6500VPCTT1E1PortEntryA Virtual T1/E1 Port Mapping Table Entry.Each entry
contains the configuration parameters for a single T1/E1
virtual port. Cdx6500VPCTT1E1PortEntry .1.3.6.1.4.1.449.2.1.2.1.1.24.3.1 |
cdx6500VPCTT1E1CfgPortNumberThis is a T1/E1 virtual port number this channel is
associated with. A value of 0 implies that this parameter
was skipped during configuration.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.24.3.1.1 |
cdx6500VPCTT1E1CfgPortTypeSpecifies the type of virtual port.
voice : The virtual voice port operates on a
configured DS0.
data : The virtual data port operates on a
configured DS0.
switchedVoice : The virtual voice port operates on a
DS0 determined by the ISDN/QSIG D Channel.
switchedData : The virtual data port operates on a DS0
determined by the ISDN/QSIG D Channel.
nc : Skipped during configuration.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.24.3.1.2 |
cdx6500VPCTT1E1CfgPhyPortNumberThis is the E1 or T1 port number this channel is
associated with. A value of 0 implies that this parameter
was skipped during configuration.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.24.3.1.3 |
cdx6500VPCTT1E1CfgTimeSlotNumberTime slot assignment for the logical channel.
T1 ports have time slots in the range (1..24) while E1
ports have time slots in the range (1..31).
In addition, Time Slot 16 is not allowed (invalid) for
E1 ports. A value of 0 implies that this parameter was
skipped during configuration.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.24.3.1.4 |
cdx6500VPCTT1E1CfgDS0RateSpecifies the number of valid data bits within each
DS0 for this port.
ds056k : 7 bits of the DS0 contains data information, the
8th bit is used for 1's density.
ds064k : All 8 bits of the DS0 contain data information.
DS0 Rate for ports configured with port type `voice' is
always 64K, while for ports configured with port type `data',
it is 56K or 64K, the default being 56K.
nc : Skipped during configuration.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.24.3.1.5 |
cdx6500VPCTT1E1CfgAggregateTypeSelects the type of physical interface for the Virtual Port.
t1e1 : The physical interface is a T1 or E1 card.
so : The physical interface is a SO card.
nc : Skipped during configuration.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.24.3.1.6 |
cdx6500VPCTT1E1CfgSOPortNumberThis is the port number of the SO interface this virtual
port is associated with. A value of 0 implies that this
parameter was skipped during configuration.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.24.3.1.7 |
cdx6500VPCTT1E1CfgBChannelThis is the B-channel on the SO interface this virtual
port is associated with. A value of 0 implies that this
parameter was skipped during configuration.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.24.3.1.8 |
cdx6500VPCTT1E1CfgLocalSubscriberAddressSpecifies the Local Subscriber Address for this virtual port.
For Incoming Call:
The Called Party number received by the aggregate interface
is compared to this parameter.
For Outgoing Call:
This will be passed as the outgoing Calling Party number.
Enter a trailing asterisk(*) as a wild-card.
Use the space bar to blank the parameter.
1 to 20 characters (valid characters are 0 through 9,
'-', ',', '/', '(', ')', and '*').
The characters '-', ',', '(', ')', and '/' are allowed only
for ease of reading.ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.24.3.1.9 |
cdx6500VPCTT1E1CfgNetSpecCallSelect the network specific call-by-call feature.
none : No network-specific facility.
attSdn : AT&T Software Defined Network
or Northern Tel Private Net.
attMc800 : AT&T Megacom800 or Northern Tel InWats.
attMc : AT&T Megcom or Northern Tel OutWats.
ntFx : Northern Tel Foreign Exchange.
ntTieTrunk : Northern Tel Tie Trunk.
attAccunet : AT&T Accunet.
attInt800 : AT&T International 800 Service.
attMq : AT&T MultiQuest or NT TRO call.
nc : Skipped during configuration.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.24.3.1.10 |
cdx6500VPCTT1E1CfgPartyNumberTypeThis is the Calling/Called party Number Type as defined
by ITU-T.
unknown : Unknown number type.
international : International number.
national : National number.
subscriber : Subscriber number.
abbreviated : Abbreviated number.
nc : Skipped during configuration.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.24.3.1.11 |
cdx6500VPCTT1E1CfgPartyNumberPlanThis is the Calling/Called party Numbering Plan as
defined by ITU-T.
unknown : Unknown numbering plan.
isdn : Recommendation E.164/E.163.
telephony : Telephony numbering plan.
private : Private numbering plan.
nc : Skipped during configuration.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.24.3.1.12 |
cdx6500VPCTT1E1CfgIndexThis is the entry number in the Virtual Port Mapping Table.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.24.3.1.13 |
cdx6500Statistics OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3 |
cdx6500StatProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3.1 |
cdx6500PSTPortProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3.1.1 |
cdx6500PSTT1E1PortTable OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3.1.1.25 |