T1-OPT-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
122
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
122 total| Object Name |
|---|
codex OBJECT IDENTIFIER .1.3.6.1.4.1.449 |
RFC1155-SMI Unknown .1.3.6.1.4.1.449 |
cdxProductSpecific OBJECT IDENTIFIER .1.3.6.1.4.1.449.2 |
cdx6500 OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1 |
cdx6500Configuration OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2 |
cdx6500CfgProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2.1 |
cdx6500PCTPortProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2.1.1 |
cdx6500PCTT1E1PortTable OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2.1.1.24 |
cdx6500PCTT1PortTable OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2.1.1.24.1 |
cdx6500PPCTT1PortTableThis table contains the T1 (Physical) Port Configuration
parameters. SEQUENCE OF Cdx6500PPCTT1PortEntry .1.3.6.1.4.1.449.2.1.2.1.1.24.1.1 |
cdx6500PPCTT1PortEntryA T1 Port Configuration Table Entry. Each entry
contains the configuration parameters for a single
T1 port. SEQUENCE OF Cdx6500PPCTT1PortEntry .1.3.6.1.4.1.449.2.1.2.1.1.24.1.1.1 |
cdx6500T1CfgPortNumberPort number of the (physical) T1 port.ro PhysicalPortNumber .1.3.6.1.4.1.449.2.1.2.1.1.24.1.1.1.1 |
cdx6500T1CfgPortTypeThis is a digital port having interface type T1.
t1 : This is a T1 port.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.24.1.1.1.2 |
cdx6500T1CfgFormatThis parameter is used to select the format of the T1
interface.
channelize : DS0 definition fixed, predefined
by the telco or the user.
isdn : DS0 definition defined by the
ISDN D channel.
nc : Skipped during configuration.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.24.1.1.1.3 |
cdx6500T1CfgLineFramingTypeIndicates the type of framing used by the DS1 circuit.
esf : Extended SuperFrame.
sf : SuperFrame.
nc : Skipped during configuration.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.24.1.1.1.4 |
cdx6500T1CfgLineCodingSelects the type of suppression used on the T1 link.
b8zs :Bipolar 8 Zero Substitution.
b7zs :Bipolar 7 zero Substitution.
ami :Alternate Mark Inversion.
nc : Skipped during configuration.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.24.1.1.1.5 |
cdx6500T1CfgTransmitClockSelects the source of the transmit clock.
int : Internal Oscillator.
rec : Received Timing.
node : Node Timing (timing off another interface).
nc : Skipped during configuration.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.24.1.1.1.6 |
cdx6500T1CfgLineBuildOutSelect the Line Build Out to match the physical interface.
For DSX interfaces, this value is based on cable
length as explained below :-
lbo0 : 0 ft to 133 ft
lbo1 :134 ft to 266 ft
lbo2 :267 ft to 399 ft
lbo3 :400 ft to 533 ft
lbo4 :534 ft to 655 ft
For DS1 interfaces, this value is based on the
signal level as explained below :-
lbo0 : 0 db
lbo1 : -7.5 db
lbo2 : -15 db
lbo3 : -22.5db
lbo4 : not valid for DS1 interfaces.
nc : Skipped during configuration.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.24.1.1.1.7 |
cdx6500T1CfgFacilityDataLinkThis describes the use of the facilities data link,
and may have the following capabilities:
none : indicates that the device does not use
the FDL.
ansi : refers to the FDL exchange recommended
by ANSI (Ansi-T1-403).
att : refers to ESF FDL exchanges (Att-54016).
nc : Skipped during configuration.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.24.1.1.1.8 |
cdx6500T1CfgThresholdValueLESThreshold value of Line Errored Seconds (LESs)
to report alarms on CTP when exceeded.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.24.1.1.1.9 |
cdx6500T1CfgThresholdValueLCVThreshold value of Line Code Violations (LCVs)
to report alarms on CTP when exceeded.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.24.1.1.1.10 |
cdx6500T1CfgThresholdValuePCVThreshold value of Path Code Violations (PCVs)
to report alarms on CTP when exceeded.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.24.1.1.1.11 |
cdx6500T1CfgThresholdValueCSSThreshold value of Controlled Slip Seconds (CSSs)
to report alarms on CTP when exceeded.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.24.1.1.1.12 |
cdx6500T1CfgThresholdValueESThreshold value of Errored Seconds (ESs)
to report alarms on CTP when exceeded.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.24.1.1.1.13 |
cdx6500T1CfgThresholdValueBESThreshold value of Bursty Errored Seconds (BESs)
to report alarms on CTP when exceeded.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.24.1.1.1.14 |
cdx6500T1CfgThresholdValueSESThreshold value of Severely Errored Seconds (SESs)
to report alarms on CTP when exceeded.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.24.1.1.1.15 |
cdx6500T1CfgThresholdValueSEFSThreshold value of Severely Errored Framing Seconds (SEFSs)
to report alarms on CTP when exceeded.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.24.1.1.1.16 |
cdx6500T1CfgThresholdValueUASThreshold value of Unavailable Seconds (UASs)
to report alarms on CTP when exceeded.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.24.1.1.1.17 |
cdx6500T1CfgThresholdValueDMThreshold value of Degraded Minutes (DMs)
to report alarms on CTP when exceeded.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.24.1.1.1.18 |
cdx6500T1CfgSwitchTypeThe ISDN switch type. This specifies the type of
equipment to which this span is connected.
The possible choices are:
att4ess : AT&T 4ESS Switch
att5ess : AT&T 5ESS Switch
ntDms100 : Northern Telecom DMS-100 Switch
ntDms250 : Northern Telecom DMS-250 Switch
md110Us : Ericsson MD-110 (North America)
md110 : Ericsson MD-110 (International)
siemens : Siemens EWSD Switch (U.S.)
ntt : Nippon Telephone and Telegraph switch (Japan)
unknown : Unknown Switch Type
nc : Skipped during configurationro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.24.1.1.1.19 |
cdx6500T1CfgVariantSelect the ISDN Switch variant. This parameter
depends upon the switch type configured.
The possible choices are:
att : AT&T Custom
nt : Northern Telecom
isdn2 : Bellcore National ISDN-2
jate : JATE-compatible (Japan)
net5 : NET-5 standard (Europe)
oneTr6 : 1TR6 standard for PRI (Germany)
vn3 : VN3 standard (France)
ccitt : General CCITT Q.931 conformance
ts014 : AUSTEL TS014 standard (Australia)
nc : Skipped during configurationro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.24.1.1.1.20 |
cdx6500T1CfgUserNetworkSideThis parameter specifies whether the T1/E1 port
is emulating the network or user side of the
ISDN network.
user : The T1 or E1 port is emulating the user,
ex. the T1 or E1 port is to be connected
to an ISDN network.
network : The T1 or E1 port is emulating the network,
ex. the T1 or E1 port is to be connected
to an ISDN PBX.
nc : Skipped during configuration.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.24.1.1.1.21 |
cdx6500T1CfgCallingIdMsbStateFor DMS100/250 switches, this parameter defines if the MSB
is set or clear in the Calling ID IE.
disabled : The MSB in the calling ID IE is cleared.
enabled : The MSB in the calling ID IE is set.
nc : Skipped during configuration.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.24.1.1.1.22 |
cdx6500Statistics OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3 |
cdx6500StatProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3.1 |
cdx6500PSTPortProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3.1.1 |
cdx6500PSTT1E1PortTable OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3.1.1.25 |
cdx6500PPSTT1PortTableThis table holds statistics information for T1 ports. SEQUENCE OF Cdx6500PPSTT1PortEntry .1.3.6.1.4.1.449.2.1.3.1.1.25.1 |
cdx6500PPSTT1PortEntryEach entry contains statistics information for one T1 port. Cdx6500PPSTT1PortEntry .1.3.6.1.4.1.449.2.1.3.1.1.25.1.1 |
cdx6500T1StatPortNumberThe port number of the T1 port.ro PhysicalPortNumber .1.3.6.1.4.1.449.2.1.3.1.1.25.1.1.1 |
cdx6500T1StatTimeSinceLastResetTypeTime since last reset has happened for the port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.1.25.1.1.2 |
cdx6500T1StatPortTypeThe configured value of the Port Type.
illegal : Invalid port type.
null : This is a null port.
t1 : This is a digital port with interface type T1.ro Enumeration .1.3.6.1.4.1.449.2.1.3.1.1.25.1.1.3 |
cdx6500T1StatInterfaceTypeThis parameter indicates the type of interface for this port.
dsx1 : This port has a DSX1 interface.
ds1Csu : This port has a DS1-CSU interface.
na : Value not available.ro Enumeration .1.3.6.1.4.1.449.2.1.3.1.1.25.1.1.4 |
cdx6500T1StatPortStateThe current port (CTP) state :
disabled : The port has been disabled.
enabled : The port has been enabled.
na : Value not available.ro Enumeration .1.3.6.1.4.1.449.2.1.3.1.1.25.1.1.5 |
cdx6500T1StatAlarmStateThe alarm state of the port :
none : No alarm.
yellow : Remote alarm indication (yellow alarm).
blue : Alarm indication signal (blue alarm).
red : No frame sync (red alarm).
na : Value not available.ro Enumeration .1.3.6.1.4.1.449.2.1.3.1.1.25.1.1.6 |
cdx6500T1BoardHWRevAndPartNumberHardware Revision and part number of the board.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.1.25.1.1.7 |
cdx6500T1StatDailyHistoryTableThe T1 Daily History Table contains various statistics
collected over the previous 24 hours which are broken
into 96 completed 15 minute intervals. SEQUENCE OF Cdx6500T1StatDailyHistoryEntry .1.3.6.1.4.1.449.2.1.3.1.1.25.3 |
cdx6500T1StatDailyHistoryEntryAn entry in the T1 Daily History Table. Cdx6500T1StatDailyHistoryEntry .1.3.6.1.4.1.449.2.1.3.1.1.25.3.1 |
cdx6500T1StatDailyHistoryIntervalThis gives the history at 15 minute intervals.Each
block represents a 15 minute interval of the day,
starting from 00:15 and ending at 24:00.Thus there
are 96 such blocks possible.Therefore,
1 represents the history at 00:15 .
2 represents the history at 00:30 .
..........
96 represents the history at 24:00 .ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.25.3.1.1 |
cdx6500T1StatDailyHistoryLESThe number of Line Errored Seconds (LESs)
encountered by the T1 interface in one of
the previous 96, individual 15 minute intervals.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.25.3.1.2 |
cdx6500T1StatDailyHistoryLCVThe number of Line Code Violations (LCVs)
encountered by the T1 interface in one of
the previous 96, individual 15 minute intervals.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.25.3.1.3 |
cdx6500T1StatDailyHistoryPCVThe number of Path Coding Violations (PCVs)
encountered by the T1 interface in one of
the previous 96, individual 15 minute intervals.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.25.3.1.4 |
cdx6500T1StatDailyHistoryCSSThe number of Controlled Slip Seconds (CSSs)
encountered by the T1 interface in one of
the previous 96, individual 15 minute intervals.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.25.3.1.5 |
cdx6500T1StatDailyHistoryESThe number of Errored Seconds (ESs)
encountered by the T1 interface in one of
the previous 96, individual 15 minute intervals.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.25.3.1.6 |
cdx6500T1StatDailyHistoryBESThe number of Bursty Errored Seconds (BESs)
encountered by the T1 interface in one of
the previous 96, individual 15 minute intervals.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.25.3.1.7 |
cdx6500T1StatDailyHistorySESThe number of Severely Errored Seconds (SESs)
encountered by the T1 interface in one of
the previous 96, individual 15 minute intervals.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.25.3.1.8 |
cdx6500T1StatDailyHistorySEFSThe number of Severely Errored Framing Seconds
(SEFSs) encountered by the T1 interface in one of
the previous 96, individual 15 minute intervals.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.25.3.1.9 |
cdx6500T1StatDailyHistoryUASThe number of Unavailable Seconds (UASs)
encountered by the T1 interface in one of
the previous 96, individual 15 minute intervals.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.25.3.1.10 |
cdx6500T1StatDailyHistoryDMThe number of Degraded Minutes (DMs)
encountered by the T1 interface in one of
the previous 96, individual 15 minute intervals.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.25.3.1.11 |
cdx6500T1StatDailyHistoryPortNumberThe port number of the T1 port.ro PhysicalPortNumber .1.3.6.1.4.1.449.2.1.3.1.1.25.3.1.12 |
cdx6500T1StatABCDStateTableThe ABCD State Table contains the current
TX / RX ABCD state of the Configured DS0 Channels. SEQUENCE OF Cdx6500T1StatABCDStateEntry .1.3.6.1.4.1.449.2.1.3.1.1.25.5 |
cdx6500T1StatABCDStateEntryAn entry in the ABCD State Table. Cdx6500T1StatABCDStateEntry .1.3.6.1.4.1.449.2.1.3.1.1.25.5.1 |
cdx6500T1StatABCDStateDS0ChannelNumberChannel number of the configured DS0 channel.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.25.5.1.1 |
cdx6500T1StatABCDStateCurrentTxStateCurrent TX ABCD state of the configured DS0 channels. This
object is no longer supported.rodeprecated DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.1.25.5.1.2 |
cdx6500T1StatABCDStateCurrentRxStateCurrent RX ABCD state of the configured DS0 channels.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.1.25.5.1.3 |
cdx6500T1StatABCDStatePortNumberPort number of the T1 port.ro PhysicalPortNumber .1.3.6.1.4.1.449.2.1.3.1.1.25.5.1.4 |
cdx6500T1ISDNStatusTableThis table holds ISDN statistics information for T1 ports. SEQUENCE OF Cdx6500T1ISDNStatusEntry .1.3.6.1.4.1.449.2.1.3.1.1.25.7 |
cdx6500T1StatISDNStatusEntryEach entry contains statistics information for one T1 port. Cdx6500T1ISDNStatusEntry .1.3.6.1.4.1.449.2.1.3.1.1.25.7.1 |
cdx6500T1StatISDNStatusPortNumberThe port number of the T1 port.ro PhysicalPortNumber .1.3.6.1.4.1.449.2.1.3.1.1.25.7.1.1 |
cdx6500T1StatNumRxCallsSinceLastResetThe number of inbound calls that were attempted
since the last statistics reset.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.25.7.1.2 |
cdx6500T1StatNumRxCallsRejectedThe number of inbound calls that were rejected
since the last statistics reset.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.25.7.1.3 |
cdx6500T1StatRxLastCallFailureCauseThe reason the last inbound call was rejected,
since the last statistics reset.
The posssible values are:
noFailureReported : No call failure
noAvailableVirtualPort : No Virtual Port available
securityViolation : Password/Calling ID security
failed
noResourcesAvailable : No resources available
callRejected : Call failed by Xircom card
invalidPhoneNumber : Incorrect phone number
outgoingCallRequestTimeout : Outgoing call request timed out
callCollision : A call collision occurred
virtualPortNotAvailable : Virtual port not available
invalidConfiguration : Invalid configuration
na : Value not availablero Enumeration .1.3.6.1.4.1.449.2.1.3.1.1.25.7.1.4 |
cdx6500T1StatRxLastCalledNumberThe phone number of the virtual port of the last ISDN
call made into this node.ro DisplayString .1.3.6.1.4.1.449.2.1.3.1.1.25.7.1.5 |
cdx6500T1StatRxLastCallingNumberThe phone number of last party to make an ISDN
call into this node.ro DisplayString .1.3.6.1.4.1.449.2.1.3.1.1.25.7.1.6 |
cdx6500T1StatRxMinCallDurationThe minimum call duration of all inbound ISDN calls made
into this node, since the last statistics reset.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.1.25.7.1.7 |
cdx6500T1StatRxMaxCallDurationThe maximum call duration of all inbound ISDN calls made
into this node, since the last statistics reset.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.1.25.7.1.8 |
cdx6500T1StatRxAvgCallDurationThe average call duration of all inbound ISDN calls made
into this node, since the last statistics reset.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.1.25.7.1.9 |
cdx6500T1StatNumTxCallsSinceLastResetThe number of outbound calls that were attempted
since the last statistics reset.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.25.7.1.10 |
cdx6500T1StatNumTxCallsRejectedThe number of outbound calls that were rejected
since the last statistics reset.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.25.7.1.11 |
cdx6500T1StatTxLastCallFailureCauseThe reason the last outbound call was rejected,
since the last statistics reset.
The posssible values are:
noFailureReported : No call failure
noAvailableVirtualPort : No Virtual Port available
securityViolation : Password/Calling ID security
failed
noResourcesAvailable : No resources available
callRejected : Call failed by Xircom card
invalidPhoneNumber : Incorrect phone number
outgoingCallRequestTimeout : Outgoing call request timed out
callCollision : A call collision occurred
virtualPortNotAvailable : Virtual port not available
invalidConfiguration : Invalid configuration
na : Value not availablero Enumeration .1.3.6.1.4.1.449.2.1.3.1.1.25.7.1.12 |
cdx6500T1StatTxLastCalledNumberThe phone number of the last ISDN call made by a virtual
port from this node.ro DisplayString .1.3.6.1.4.1.449.2.1.3.1.1.25.7.1.13 |
cdx6500T1StatTxLastCallingNumberThe phone number of the virtual port that made the last
ISDN call from this node.ro DisplayString .1.3.6.1.4.1.449.2.1.3.1.1.25.7.1.14 |
cdx6500T1StatTxMinCallDurationThe minimum call duration of all outbound ISDN calls made
from this node, since the last statistics reset.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.1.25.7.1.15 |
cdx6500T1StatTxMaxCallDurationThe maximum call duration of all outbound ISDN calls made
from this node, since the last statistics reset.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.1.25.7.1.16 |
cdx6500T1StatTxAvgCallDurationThe average call duration of all outbound ISDN calls made
from this node, since the last statistics reset.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.1.25.7.1.17 |
cdx6500T1StatDchannelStateSpecifies the status of the D Channel.
up : The D Channel is up.
down : The D Channel is down.
na : Value not available.ro Enumeration .1.3.6.1.4.1.449.2.1.3.1.1.25.7.1.18 |
cdx6500T1ISDNCallSummaryTableThis table holds ISDN call summary information for T1 ports. SEQUENCE OF Cdx6500T1StatISDNCallSummaryEntry .1.3.6.1.4.1.449.2.1.3.1.1.25.9 |
cdx6500T1StatISDNCallSummaryEntryAn entry in the ISDN call summary table. Cdx6500T1StatISDNCallSummaryEntry .1.3.6.1.4.1.449.2.1.3.1.1.25.9.1 |
cdx6500T1StatISDNBChannelNumberB-Channel number of the ISDN Channel.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.25.9.1.1 |
cdx6500T1StatISDNBChannelStatusStatus of the ISDN B-Channel.
The posssible values are:
idle : The B-Channel is in the idle state.
ringing : The B-Channel is in the ringing state.
connected : The B-Channel is in the connected state.
outOfService : The B-Channel is out of service.
na : Value not available.ro Enumeration .1.3.6.1.4.1.449.2.1.3.1.1.25.9.1.2 |
cdx6500T1StatISDNCallDirectionDirection of the ISDN call on the B-Channel.
The posssible values are:
inbound : The current call is in the inbound direction.
outbound : The current call is in the outbound direction.
invalid : There is no call present.
na : Value not available.ro Enumeration .1.3.6.1.4.1.449.2.1.3.1.1.25.9.1.3 |
cdx6500T1StatISDNCallingNumberThis is the phone number of the party originating the
ISDN call.ro DisplayString .1.3.6.1.4.1.449.2.1.3.1.1.25.9.1.4 |
cdx6500T1StatISDNCalledNumberThis is the phone number of the party at the destination
end of the ISDN call.ro DisplayString .1.3.6.1.4.1.449.2.1.3.1.1.25.9.1.5 |
cdx6500T1StatISDNDS0RateDS0 Rate of the ISDN B-Channel.
The posssible values are:
ds056k : The DS0 Rate is 56K.
ds064k : The DS0 Rate is 64K.
na : Value not available.ro Enumeration .1.3.6.1.4.1.449.2.1.3.1.1.25.9.1.6 |
cdx6500T1StatISDNVirtualPortNumberVirtual Port Number of the port using this B-Channel.
A value of 0 implies that no virtual port is
currently using the B-Channel.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.25.9.1.7 |
cdx6500T1StatISDNTimeCallStartedThis is the duration that the current call on this
B-Channel has been connected.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.1.25.9.1.8 |
cdx6500T1StatISDNPortNumberPort number of the T1 port.ro PhysicalPortNumber .1.3.6.1.4.1.449.2.1.3.1.1.25.9.1.9 |
cdx6500T1StatLast24HoursReportTableThis table holds a report of the cumulative sum
of the statistics for the previous 24 hour interval. SEQUENCE OF Cdx6500T1StatLast24HoursReportEntry .1.3.6.1.4.1.449.2.1.3.1.1.25.11 |
cdx6500T1StatLast24HoursReportEntryEach entry contains statistics information for one T1 port. Cdx6500T1StatLast24HoursReportEntry .1.3.6.1.4.1.449.2.1.3.1.1.25.11.1 |
cdx6500T1StatLast24HoursReportPortNumberPort number of the T1 port.ro PhysicalPortNumber .1.3.6.1.4.1.449.2.1.3.1.1.25.11.1.1 |
cdx6500T1StatLast24HoursReportLESThe number of Line Errored Seconds (LESs)
encountered by the T1 interface in the
previous 24 hour interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.25.11.1.2 |
cdx6500T1StatLast24HoursReportLCVThe number of Line Code Violations (LCVs)
encountered by the T1 interface in the
previous 24 hour interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.25.11.1.3 |
cdx6500T1StatLast24HoursReportPCVThe number of Path Coding Violations (PCVs)
encountered by the T1 interface in the
previous 24 hour interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.25.11.1.4 |
cdx6500T1StatLast24HoursReportCSSThe number of Controlled Slip Seconds (CSSs)
encountered by the T1 interface in the
previous 24 hour interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.25.11.1.5 |
cdx6500T1StatLast24HoursReportESThe number of Errored Seconds (ESs)
encountered by the T1 interface in the
previous 24 hour interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.25.11.1.6 |
cdx6500T1StatLast24HoursReportBESThe number of Bursty Errored Seconds (BESs)
encountered by the T1 interface in the
previous 24 hour interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.25.11.1.7 |
cdx6500T1StatLast24HoursReportSESThe number of Severely Errored Seconds (SESs)
encountered by the T1 interface in the
previous 24 hour interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.25.11.1.8 |
cdx6500T1StatLast24HoursReportSEFSThe number of Severely Errored Framing Seconds (SEFSs)
encountered by the T1 interface in the previous
24 hour interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.25.11.1.9 |
cdx6500T1StatLast24HoursReportUASThe number of Unavailable Seconds (UASs)
encountered by the T1 interface in the
previous 24 hour interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.25.11.1.10 |
cdx6500T1StatCurrent15MinutesReportTableThis table holds a report of the statistics for the
current 15 minutes interval. SEQUENCE OF Cdx6500T1StatCurrent15MinutesReportEntry .1.3.6.1.4.1.449.2.1.3.1.1.25.13 |
cdx6500T1StatCurrent15MinutesReportEntryEach entry contains statistics information for one T1 port. Cdx6500T1StatCurrent15MinutesReportEntry .1.3.6.1.4.1.449.2.1.3.1.1.25.13.1 |
cdx6500T1StatCurrent15MinutesReportPortNumberPort number of the T1 port.ro PhysicalPortNumber .1.3.6.1.4.1.449.2.1.3.1.1.25.13.1.1 |
cdx6500T1StatCurrent15MinutesReportTimeElapsedThe time that has elapsed since the beginning
of the current 15 minutes interval.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.1.25.13.1.2 |
cdx6500T1StatCurrent15MinutesReportLESThe number of Line Errored Seconds (LESs)
encountered by the T1 interface in the
current 15 minute interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.25.13.1.3 |
cdx6500T1StatCurrent15MinutesReportLCVThe number of Line Code Violations (LCVs)
encountered by the T1 interface in the
current 15 minute interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.25.13.1.4 |
cdx6500T1StatCurrent15MinutesReportPCVThe number of Path Coding Violations (PCVs)
encountered by the T1 interface in the
current 15 minute interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.25.13.1.5 |
cdx6500T1StatCurrent15MinutesReportCSSThe number of Controlled Slip Seconds (CSSs)
encountered by the T1 interface in the
current 15 minute interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.25.13.1.6 |
cdx6500T1StatCurrent15MinutesReportESThe number of Errored Seconds (ESs)
encountered by the T1 interface in the
current 15 minute interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.25.13.1.7 |
cdx6500T1StatCurrent15MinutesReportBESThe number of Bursty Errored Seconds (BESs)
encountered by the T1 interface in the
current 15 minute interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.25.13.1.8 |
cdx6500T1StatCurrent15MinutesReportSESThe number of Severely Errored Seconds (SESs)
encountered by the T1 interface in the
current 15 minute interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.25.13.1.9 |
cdx6500T1StatCurrent15MinutesReportSEFSThe number of Severely Errored Framing Seconds (SEFSs)
encountered by the T1 interface in the current
15 minute interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.25.13.1.10 |
cdx6500T1StatCurrent15MinutesReportUASThe number of Unavailable Seconds (UASs)
encountered by the T1 interface in the
current 15 minute interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.25.13.1.11 |