SS7VIEW-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for SS7VIEW-MIB.
58
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
58 total| Object Name |
|---|
nortel OBJECT IDENTIFIER .1.3.6.1.4.1.562 |
RFC1213-MIB Unknown .1.3.6.1.4.1.562 |
dialaccess OBJECT IDENTIFIER .1.3.6.1.4.1.562.14 |
ss7view OBJECT IDENTIFIER .1.3.6.1.4.1.562.14.1 |
ss7viewTrapVars OBJECT IDENTIFIER .1.3.6.1.4.1.562.14.1.1 |
csgStatusPollClearThe SS7View status poll of the CSG succeeded. This is
generated after a poll to a CSG which previously failed
is now successful. TRAP-TYPE .1.3.6.1.4.1.562.14.1.1.0.1031 |
csgStatusPollFailedThe SS7View status poll of the CSG failed. There may be
multiple failure reasons but only the first line of the reason
(up to 50 characters) is shown.
Check the WebNMS/logs/stderr.txt for the complete list of
failures. TRAP-TYPE .1.3.6.1.4.1.562.14.1.1.0.1033 |
csgStateChangeNormalThe CSG Server state triplet changed. Based on the state values,
SS7View computes that this is a Clear/Normal alarm. TRAP-TYPE .1.3.6.1.4.1.562.14.1.1.0.1051 |
csgStateChangeWarningThe CSG Server state triplet changed. Based on the state values,
SS7View computes that this is a Warning alarm. TRAP-TYPE .1.3.6.1.4.1.562.14.1.1.0.1052 |
csgStateChangeMinorThe CSG Server state triplet changed. Based on the state values,
SS7View computes that this is a Minor alarm. TRAP-TYPE .1.3.6.1.4.1.562.14.1.1.0.1053 |
csgStateChangeMajorThe CSG Server state triplet changed. Based on the state values,
SS7View computes that this is a Major alarm. TRAP-TYPE .1.3.6.1.4.1.562.14.1.1.0.1054 |
csgStateChangeCriticalThe CSG Server state triplet changed. Based on the state values,
SS7View computes that this is a Critical alarm. TRAP-TYPE .1.3.6.1.4.1.562.14.1.1.0.1055 |
ss7viewLogArchiveAn SS7View audit has found the WebNMS logs directory to be
excessively large, taken action by archiving the directory, and
has removed all but the most current few lines of information. TRAP-TYPE .1.3.6.1.4.1.562.14.1.1.0.1081 |
partitionNameIdentifies disk partition name. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.1.1.1 |
diskCapacityIndicates (in Percentage) how full the disk is. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.1.1.2 |
diskThresholdIndicates the threshold of diskCapacity. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.1.1.3 |
trapSourceIndicates where the trap comes from. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.1.1.4 |
pollSS7ViewHostThe host name of the SS7View workstation DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.1.1.30 |
pollSS7ViewIPThe IP Address of the SS7View workstation IpAddress .1.3.6.1.4.1.562.14.1.1.31 |
pollServerNameThe CSG Server system/local host/object name DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.1.1.32 |
pollServerCLLIThe CSG Server CLLI name DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.1.1.33 |
pollServerIpAddressThe CSG Server CLLI name IpAddress .1.3.6.1.4.1.562.14.1.1.34 |
pollFailReasonThe first line (50 characters) of the reason for the poll failure DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.1.1.35 |
pollSeverityThe severity of the failure which can be one of
Warning, Minor, Major, or Critical DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.1.1.36 |
stateChangeServerNameThe CSG Server system/local host/object name DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.1.1.50 |
stateChangeServerCLLIThe CSG Server CLLI name DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.1.1.51 |
stateChangeServerOpStateIdentifies the Operational State of INC. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.1.1.52 |
stateChangeServerStandbyStateIdentifies the Standby state of INC. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.1.1.53 |
stateChangeServerAvailStateIdentifies the Availability state of INC. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.1.1.54 |
logArchiveNameIdentifies the created archive name for the log files. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.1.1.80 |
ss7viewTraps OBJECT IDENTIFIER .1.3.6.1.4.1.562.14.1.2 |
ss7viewApplyConfigFileThe Trap generated when dialaccess map is re-read. TRAP-TYPE .1.3.6.1.4.1.562.14.1.2.0.1000 |
ss7viewRefreshReadOnlyMapThe Trap generated when dialaccess map gets changed. TRAP-TYPE .1.3.6.1.4.1.562.14.1.2.0.1001 |
ss7viewDiskFullClearThe Trap generated when the disk is cleared until the
capacity is less than the threshold. TRAP-TYPE .1.3.6.1.4.1.562.14.1.2.0.1002 |
ss7viewDiskFullRaiseThe Trap generated when the disk capacity is greater than
threshold. TRAP-TYPE .1.3.6.1.4.1.562.14.1.2.0.2002 |
privateTrapVarsThe subordinates of this node which are internal trap variables
used within ss7view are not for browsing. OBJECT IDENTIFIER .1.3.6.1.4.1.562.14.1.3 |
alarmRaiseIndicates if the INC alarm is raised or not
0 = clear
1 = raise
2 = state
*It is the internal variable used in ss7view. AlarmRaiseType .1.3.6.1.4.1.562.14.1.3.1 |
incSelectionNameIdentifies INC selection name.
*It is the internal variable used in ss7view. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.1.3.2 |
ss7viewWebUITrapVars OBJECT IDENTIFIER .1.3.6.1.4.1.562.14.1.4 |
privateTrapsThe subordinates of this node which are internal traps used
within ss7view are not for browsing. OBJECT IDENTIFIER .1.3.6.1.4.1.562.14.1.4 |
privateRestartedProcess incsurvd has been re-started.
* It is the internal trap used in ss7view, not for browsing. TRAP-TYPE .1.3.6.1.4.1.562.14.1.4.0.3000 |
telnetServerRestartedThe SS7View WebUI telnet server has started/restarted. TRAP-TYPE .1.3.6.1.4.1.562.14.1.4.0.4000 |
webServerRestartedThe SS7View WebUI web server has started/restarted. TRAP-TYPE .1.3.6.1.4.1.562.14.1.4.0.4010 |
privateNotifyMapThis trap will notify the dialaccessMap process of changes to an
INC alarm state.
* It is the internal trap used in ss7view, not for browsing. TRAP-TYPE .1.3.6.1.4.1.562.14.1.4.0.58916871 |
ss7viewINCTrapVars OBJECT IDENTIFIER .1.3.6.1.4.1.562.14.1.5 |
incComplexAlarmVarsThe subordinates of this node which are INC complex trap
variables used within ss7view. OBJECT IDENTIFIER .1.3.6.1.4.1.562.14.1.5.1 |
incComplexNameIdentifies INC complex name. (CLLI) DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.1.5.1.1 |
incComplexIpAddressIdentifies the IPs of INCs in complex. IpAddress .1.3.6.1.4.1.562.14.1.5.1.2 |
incComplexStateIdentifies the state of INC. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.1.5.1.3 |
incComplexOpStateIdentifies the Operational State of INC. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.1.5.1.4 |
incComplexStandbyStateIdentifies the Standby state of INC. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.1.5.1.5 |
incComplexAvailStateIdentifies the Availability state of INC. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.14.1.5.1.6 |
ss7viewINCTraps OBJECT IDENTIFIER .1.3.6.1.4.1.562.14.1.6 |
incCompStateNormalIf the alarm state of INC complex is changed into Normal,
this trap will be raised. The alarm state of INC complexe
is caculated by Operational State, Standby State, and
Availability state of INCs in the complex. TRAP-TYPE .1.3.6.1.4.1.562.14.1.6.0.1001 |
incCompStateWarningIf the alarm state of INC complex is changed into Warning,
this trap will be raised. The alarm state of INC complexe
is caculated by Operational State, Standby State, and
Availability state of INCs in the complex. TRAP-TYPE .1.3.6.1.4.1.562.14.1.6.0.1002 |
incCompStateMinorIf the alarm state of INC complex is changed into Minor,
this trap will be raised. The alarm state of INC complexe
is caculated by Operational State, Standby State, and
Availability state of INCs in the complex. TRAP-TYPE .1.3.6.1.4.1.562.14.1.6.0.1003 |
incCompStateMajorIf the alarm state of INC complex is changed into Major,
this trap will be raised. The alarm state of INC complexe
is caculated by Operational State, Standby State, and
Availability state of INCs in the complex. TRAP-TYPE .1.3.6.1.4.1.562.14.1.6.0.1004 |
incCompStateCriticalIf the alarm state of INC complex is changed into Critical,
this trap will be raised. The alarm state of INC complexe
is caculated by Operational State, Standby State, and
Availability state of INCs in the complex. TRAP-TYPE .1.3.6.1.4.1.562.14.1.6.0.1005 |