SPP-OPT-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
97
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
97 total| Object Name |
|---|
codex OBJECT IDENTIFIER .1.3.6.1.4.1.449 |
RFC1155-SMI Unknown .1.3.6.1.4.1.449 |
cdxProductSpecific OBJECT IDENTIFIER .1.3.6.1.4.1.449.2 |
cdx6500 OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1 |
cdx6500Configuration OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2 |
cdx6500CfgProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2.1 |
cdx6500PCTPortProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2.1.1 |
cdx6500PPCTSPPPortTableThis table contains the SPP Port configuration
parameters. SEQUENCE OF Cdx6500PPCTSPPPortEntry .1.3.6.1.4.1.449.2.1.2.1.1.30 |
cdx6500PPCTSPPPortEntryEntries in the SPP Port Configuration Table. Cdx6500PPCTSPPPortEntry .1.3.6.1.4.1.449.2.1.2.1.1.30.1 |
cdx6500SPPPCfgPortNumPort Number of this port.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.30.1.1 |
cdx6500SPPPCfgPortTypePort Type of the port.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.30.1.2 |
cdx6500SPPPCfgPortSpeedThis is the speed of the port in bits per second.
speed300 : 300 bits per second
speed600 : 600 bits per second
speed1200 : 1200 bits per second
speed1800 : 1800 bits per second
speed2400 : 2400 bits per second
speed4800 : 4800 bits per second
speed7200 : 7200 bits per second
speed9600 : 9600 bits per second
speed19200 : 19200 bits per second.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.30.1.3 |
cdx6500SPPPCfgInterchTimeoutThis indicates the maximum time period allowed between
received characters.
time50 : maximum time period allowed 50 seconds.
time100 : maximum time period allowed 100 seconds.
time150 : maximum time period allowed 150 seconds.
time200 : maximum time period allowed 200 seconds.
time250 : maximum time period allowed 250 seconds.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.30.1.4 |
cdx6500SPPPCfgSLCNumThis specifies the SLC (Smart Line Controller) the port
is connected to.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.30.1.5 |
cdx6500SPPPCfgSLCLineNumThis specifies the line on the SLC (Smart Line Controller)
the port is connected to.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.30.1.6 |
cdx6500SPPPCfgStnIDListList of station identifiers the port will support. A
range of station numbers can be entered, for example :
1, 6, 8-12, 250-255 indicates 1, 6, 8, 9, 10, 11, 12,
250, 251, 252, 253, 254, 255 .ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.2.1.1.30.1.7 |
cdx6500SPPPCfgProtocolIDThe Protocol Identifier is the first four bytes of
the call user data. The default is: 0x11, 0x9F, 0xA7, 0x46.ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.30.1.8 |
cdx6500SPPPCfgQueueSizeThis specifies the size of the queue which will be used
to store the packets to be forwarded to SLC (Smart Line
Controller).ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.30.1.9 |
cdx6500SPPPCfgBlockingThreshThis specifies the blocking threshold for the queue
being used by the SPP.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.30.1.10 |
cdx6500SPPPCfgUnblockThreshThis specifies the unblocking threshold for the queue
being used by the SPP.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.30.1.11 |
cdx6500SPPPCfgElectricalInterfaceTypeSpecify the Electrical Interface Type:
V.24 - V.24 Electrical Interface Type
V.35 - V.35 Electrical Interface Type
V.36 - V.36 Electrical Interface Type
X.21 - X.21 Electrical Interface Type
NONE - Electrically disabledro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.30.1.12 |
cdx6500SPPPCfgV24ElectricalInterfaceOptionSpecify the Pin 22 option:
RI - V.24 uses Pin 22 for Ring Indicator output signal
TM - V.24 uses Pin 22 for Test Mode input signalro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.30.1.13 |
cdx6500SPPPCfgHighSpeedElectricalInterfaceOptionSpecify the cable type:
NONE - V.35/V.36/X.21 DCE with straight through cable
XOVER - V.35/V.36/X.21 DCE with crossover adapter cablero Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.30.1.14 |
cdx6500PCTStationProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2.1.3 |
cdx6500Statistics OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3 |
cdx6500StatProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3.1 |
cdx6500PSTPortProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3.1.1 |
cdx6500PPSTSPPPStatsTableThis table contains the SPP Port Statistics Parameters. SEQUENCE OF Cdx6500PPSTSPPPStatEntry .1.3.6.1.4.1.449.2.1.3.1.1.31 |
cdx6500PPSTSPPPStatEntryEntries in the SPP Port Statistics Table. Cdx6500PPSTSPPPStatEntry .1.3.6.1.4.1.449.2.1.3.1.1.31.1 |
cdx6500SPPPStatPortNumPort Number of this port.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.31.1.1 |
cdx6500SPPPStatPortStatusThis indicates the operational status of the port.
disabled : port is disabled
enabled : port is enabled
busyOut : busy out the port
up : port is up
down : port is down.
newvalDisabled : same functionality as 'disabled', new
enumeration added for RFC1155 compatibility.ro Enumeration .1.3.6.1.4.1.449.2.1.3.1.1.31.1.2 |
cdx6500SPPPStatPortTypeThis indicates the type of access protocol for this port.ro Enumeration .1.3.6.1.4.1.449.2.1.3.1.1.31.1.3 |
cdx6500SPPPStatPortSpeedThis indicates the port speed in bits per second.
speed300 : 300 bits per second
speed600 : 600 bits per second
speed1200 : 1200 bits per second
speed1800 : 1800 bits per second
speed2400 : 2400 bits per second
speed4800 : 4800 bits per second
speed7200 : 7200 bits per second
speed9600 : 9600 bits per second
speed19200 : 19200 bits per second.ro Enumeration .1.3.6.1.4.1.449.2.1.3.1.1.31.1.4 |
cdx6500SPPPStatPortUtilInThis indicates the port utilization for the line to
port direction.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.31.1.5 |
cdx6500SPPPStatPortUtilOutThis indicates the port utilization for the port to
line direction.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.31.1.6 |
cdx6500SPPPStatSLCNumThis indicates the number of the SLC to which the port
is connected.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.31.1.7 |
cdx6500SPPPStatSLCLineNumThis indicates the line number of the SLC to which the
port is connected.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.31.1.8 |
cdx6500SPPPStatFlowCntrlStateThis indicates whether the port is blocked by SLC or not.ro Enumeration .1.3.6.1.4.1.449.2.1.3.1.1.31.1.9 |
cdx6500SPPPStatLastStatsResetThis specifies the time stamp of the last statistics reset.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.1.31.1.10 |
cdx6500SPPPStatChrsInThis indicates the number of characters that have been
received by the port.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.31.1.11 |
cdx6500SPPPStatChrsOutThis indicates the number of characters that have been
transmitted by the port.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.31.1.12 |
cdx6500SPPPStatFramesInThis indicates the number of frames that have been
received by the port.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.31.1.13 |
cdx6500SPPPStatFramesOutThis indicates the number of frames that have been
transmitted by the port.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.31.1.14 |
cdx6500SPPPStatChrsInPerSecThis indicates the rate at which characters have been
received by the port.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.31.1.15 |
cdx6500SPPPStatChrsOutPerSecThis indicates the rate at which characters have been
transmitted by the port.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.31.1.16 |
cdx6500SPPPStatFramesInPerSecThis indicates the rate at which frames have been
received by the port.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.31.1.17 |
cdx6500SPPPStatFramesOutPerSecThis indicates the rate at which frames have been
transmitted by the port.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.31.1.18 |
cdx6500SPPPStatNoOfErrorFramesThis indicates the number of erroneous frames received
by the port.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.31.1.19 |
cdx6500SPPPStatNoOfStnsThis indicates the number of stations on this SLC line.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.31.1.20 |
cdx6500PSTStationProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3.1.3 |
cdx6500SPSTSPPStnStatTableThis table contains SPP Station statistics parameters. SEQUENCE OF Cdx6500SPSTSPPSStatEntry .1.3.6.1.4.1.449.2.1.3.1.3.9 |
cdx6500SPSTSPPSStatEntryEntries in the SPP Station Statistics Table. Cdx6500SPSTSPPSStatEntry .1.3.6.1.4.1.449.2.1.3.1.3.9.1 |
cdx6500SPPSStatPortNumPort Number of this port.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.3.9.1.1 |
cdx6500SPPSStatStnIdThis specifies the entry number of this station.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.3.9.1.2 |
cdx6500SPPSStatStnStatusThis indicates the state of the station.
disabled : Station is disabled
enabled : Station is enabled
busyOut : busy out the station
up : Station is enabled
down : Station is down.
newvalDisabled : same functionality as 'disabled', new
enumeration added for RFC1155 compatibility.ro Enumeration .1.3.6.1.4.1.449.2.1.3.1.3.9.1.3 |
cdx6500SPPSStatSLCNumThis indicates the number of the SLC to which the port
is connected.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.3.9.1.4 |
cdx6500SPPSStatSLCLineNumThis indicates the line number of the SLC to which the
port is connected.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.3.9.1.5 |
cdx6500SPPSStatAdjChanStateThis indicates whether the port is blocked by the adjacent
channel or not.ro Enumeration .1.3.6.1.4.1.449.2.1.3.1.3.9.1.6 |
cdx6500SPPSStatCurrCallSummStatusThis indicates the current status of the SPP station.
calling : when it is awaiting call accept from Host
connected : when the connection to the Host has been
established.ro Enumeration .1.3.6.1.4.1.449.2.1.3.1.3.9.1.7 |
cdx6500SPPSStatLastClrCauseCodeThis indicates the cause code received in the last clear
packet.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.3.9.1.8 |
cdx6500SPPSStatLastClrDiagCodeThis indicates the diagnostic code received in the last
clear packet.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.3.9.1.9 |
cdx6500SPPSStatLastInCalledAddressThis indicates the called address in the last inbound
call packet.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.3.9.1.10 |
cdx6500SPPSStatLastInCallingAddressThis indicates the calling address in the last inbound
call packet.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.3.9.1.11 |
cdx6500SPPSStatLastInCallFacilitiesThis indicates the facilities in the last inbound call
request packet.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.3.9.1.12 |
cdx6500SPPSStatLastInCallCUDThis indicates the data in the Call User Data field in the
last inbound call request packet.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.3.9.1.13 |
cdx6500SPPSStatLastOutCalledAddressThis indicates the called address in the last outbound
call packet.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.3.9.1.14 |
cdx6500SPPSStatLastOutCallingAddressThis indicates the calling address in the last outbound
call packet.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.3.9.1.15 |
cdx6500SPPSStatLastOutCallFacilitiesThis indicates the facilities in the last outbound call
request packet.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.3.9.1.16 |
cdx6500SPPSStatLastOutCallCUDThis indicates the data in the Call User Data field in the
last outbound call request packet.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.3.9.1.17 |
cdx6500SPPSStatChrsInThis indicates the number of characters received by the
PAD from SLC for this station.ro Counter .1.3.6.1.4.1.449.2.1.3.1.3.9.1.18 |
cdx6500SPPSStatChrsOutThis indicates the number of characters sent by the
PAD to SLC for this station.ro Counter .1.3.6.1.4.1.449.2.1.3.1.3.9.1.19 |
cdx6500SPPSStatFramesInThis indicates the number of frames received by the
PAD from SLC for this station.ro Counter .1.3.6.1.4.1.449.2.1.3.1.3.9.1.20 |
cdx6500SPPSStatFramesOutThis indicates the number of frames sent by the
PAD to SLC for this station.ro Counter .1.3.6.1.4.1.449.2.1.3.1.3.9.1.21 |
cdx6500SPPSStatChrsInPerSecThis indicates the rate at which characters were received
by the PAD from SLC for this station.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.3.9.1.22 |
cdx6500SPPSStatChrsOutPerSecThis indicates the rate at which characters were sent
by the PAD to SLC for this station.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.3.9.1.23 |
cdx6500SPPSStatFramesInPerSecThis indicates the rate at which frames were received
by the PAD from SLC for this station.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.3.9.1.24 |
cdx6500SPPSStatFramesOutPerSecThis indicates the rate at which frames were sent
by the PAD to SLC for this station.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.3.9.1.25 |
cdx6500SPPSStatNoOfErrorFramesThis indicates the number of erroneous frames received.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.3.9.1.26 |
cdx6500SPPSStatStnStateThis indicates the current status of the configured station.
up : station is up
dsbl : station is disabled.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.3.9.1.27 |
cdx6500SPPSStatLastStatsResetThis specifies the time stamp of the last statistics reset.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.3.9.1.28 |
cdx6500Controls OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.4 |
cdx6500ContSPPTable OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.4.13 |
cdx6500ContSPPPortTableThis table contains the SPP Port Control parameters. SEQUENCE OF Cdx6500ContSPPPortEntry .1.3.6.1.4.1.449.2.1.4.13.1 |
cdx6500ContSPPPortEntryEntries in the SPP Port Control Table. Cdx6500ContSPPPortEntry .1.3.6.1.4.1.449.2.1.4.13.1.1 |
cdx6500ContSPPPortNumPort Number of this port. INTEGER .1.3.6.1.4.1.449.2.1.4.13.1.1.1 |
cdx6500ContSPPPortBootBoots the specified SPP Port
boot : Boot the port.rw Enumeration .1.3.6.1.4.1.449.2.1.4.13.1.1.2 |
cdx6500ContSPPPortEnableEnables the specified SPP Port.
enable : Enable the Port.rw Enumeration .1.3.6.1.4.1.449.2.1.4.13.1.1.3 |
cdx6500ContSPPPortDisableDisables the specified SPP Port.
disable : Disable Port.rw Enumeration .1.3.6.1.4.1.449.2.1.4.13.1.1.4 |
cdx6500ContSPPPortResetStatsReset statistics for the specified SPP Port.
reset : Reset port statistics.rw Enumeration .1.3.6.1.4.1.449.2.1.4.13.1.1.5 |
cdx6500ContSPPStnTableThis table contains the SPP Station Control parameters. SEQUENCE OF Cdx6500ContSPPStnEntry .1.3.6.1.4.1.449.2.1.4.13.2 |
cdx6500ContSPPStnEntryEntries in the SPP Station Control Table. Cdx6500ContSPPStnEntry .1.3.6.1.4.1.449.2.1.4.13.2.1 |
cdx6500SContSPPPortNumPort Number of this port. INTEGER .1.3.6.1.4.1.449.2.1.4.13.2.1.1 |
cdx6500ContSPPStnIdSPP station number. INTEGER .1.3.6.1.4.1.449.2.1.4.13.2.1.2 |
cdx6500ContSPPStnBootBoots the secified SPP station
boot : Boot the station. Enumeration .1.3.6.1.4.1.449.2.1.4.13.2.1.3 |
cdx6500ContSPPStnEnableEnables the specified SPP station.
enable : Enable station.rw Enumeration .1.3.6.1.4.1.449.2.1.4.13.2.1.4 |
cdx6500ContSPPStnDisableDisables the specified SPP station.
disable : Disable Station.rw Enumeration .1.3.6.1.4.1.449.2.1.4.13.2.1.5 |
cdx6500ContSPPStnResetStatsReset statistics for the specified SPP station.
reset : Reset station statistics.rw Enumeration .1.3.6.1.4.1.449.2.1.4.13.2.1.6 |