SPIDCOM-ALARM-MIB
AI MIB Summary
The SPIDCOM-ALARM-MIB enables SNMP-based monitoring of hardware and software fault conditions, including link failures, power anomalies, and system errors, within SPIDCOM telecommunications infrastructure. It provides the standardized MIB tree structure required for alarm generation, notification, and state tracking to facilitate real-time network fault management.
Definition of the MIB tree structure to manage the Alarm Monitoring.
Main OID:
neAlarm.1.3.6.1.4.1.22764.2.1
22
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
22 total| Object Name |
|---|
neAlarmDefinition of the MIB tree structure to manage the Alarm Monitoring. MODULE-IDENTITY .1.3.6.1.4.1.22764.2.1 |
neAlarmTableneAlarmTable represents all the possible alarms on the NE, stating the probable cause, the alarm type and the perceived severity as per [X.733]. Note that each entry is significant until neAlarmIsApplicable is applicable(1). Entries should never be removed unless the NE they refer to disconnected NEs. To invalidate an entry the Agent sets neAlarmIsApplicable to notApplicable(0). before invalidating the entry, the agent sets the neAlarmPerceivedSeverity to cleared. SEQUENCE OF NeAlarmEntry .1.3.6.1.4.1.22764.2.1.1 |
neAlarmEntryneAlarmMibEntry: an entry in neAlarmMibTable. NeAlarmEntry .1.3.6.1.4.1.22764.2.1.1.1 |
neAlarmIndexneAlarmIndex is a unique identifier for an alarm on a given type of NE. The association between the alarmIndex and the alarm for the type of NE is described in the NE MIB. For example for the SRA L it is in the NETVIEWER SRAL 16X2 MIB.ro Unsigned32 .1.3.6.1.4.1.22764.2.1.1.1.1 |
neAlarmAdditionalTextneAlarmDescription is a brief description of a given alarm. E.g. Tributary 1 Card Fail.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.22764.2.1.1.1.2 |
neAlarmProbableCauseneAlarmProbablecause represents the probable cause values for the alarms as per [X.733].ro ItuAlarmProbableCause .1.3.6.1.4.1.22764.2.1.1.1.3 |
neAlarmDescriptionneAlarmDescription represents a description of the Alarm, as per [X.733]ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.22764.2.1.1.1.4 |
neAlarmTypeneAlarmType represents the event type values for the alarms as per [X.733].ro ItuAlarmType .1.3.6.1.4.1.22764.2.1.1.1.5 |
neAlarmManagedObjectneAlarmManagedObject represents the managed Object values for the alarms.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.22764.2.1.1.1.6 |
neAlarmStatusIf neAlarmStatus is active(1) the current alarm is active for the NE. If neAlarmStatus is inactive(2), the current alarm is inactive (normality) for the NE. If neAlarmStatus is notAffected(3), the current alarm is not significant for the NE.rw Enumeration .1.3.6.1.4.1.22764.2.1.1.1.7 |
neAlarmAlreadyPresentThis field could be use to know if alarm already there.ro Enumeration .1.3.6.1.4.1.22764.2.1.1.1.8 |
neAlarmTimeStampThe alarm timestamp.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.22764.2.1.1.1.9 |
neAlarmActiveLastTrapIndexThis is the Alarm Index sent for which the last trap was sentro Unsigned32 .1.3.6.1.4.1.22764.2.1.2 |
neClearTerminatedAlarmsWhen the manager sets this object, the agent deletes its alarms which status is terminatedrw Integer32 (1) .1.3.6.1.4.1.22764.2.1.3 |
neAlarmActivePhotoWhen the manager sets this object, the agent sends all the active alarms from neAlarmtable to the manager.rw Integer32 (1) .1.3.6.1.4.1.22764.2.1.4 |
neAlarmTrap OBJECT IDENTIFIER .1.3.6.1.4.1.22764.2.1.10 |
neAlarmTrapCounterThis object counts only the traps sent under node neAlarmTrap.ro Counter32 .1.3.6.1.4.1.22764.2.1.10.2 |
neAlarmTrapFilterIf trapFilterOn, the agent sends no traps under node neAlarmTrap.rw NeTrapFilter .1.3.6.1.4.1.22764.2.1.10.3 |
neAlarmTrapDestiIpThe @IP where traps are sentrw IpAddress .1.3.6.1.4.1.22764.2.1.10.4 |
neAlarmTrapDestiPortThe UDP port where traps are sentrw Unsigned32 .1.3.6.1.4.1.22764.2.1.10.5 |
neAlarmGroupThe objects you can find in this MIB. Unknown .1.3.6.1.4.1.22764.2.1.11 |
neAlarmActiveGroupThe object regarding active alarms Unknown .1.3.6.1.4.1.22764.2.1.13 |