SPC200
AI MIB Summary
The SPC200 MIB module facilitates the monitoring and management of Siemens SPC200 series industrial communication processors, specifically exposing metrics for interface status, traffic counters, error statistics, and system resource utilization. It enables network administrators to track device health, detect link failures, and analyze throughput performance within industrial automation networks.
Description
Main OID:
spc200MIB.1.3.6.1.4.1.22764.1
244
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
244 total| Object Name |
|---|
spc200MIBDescription MODULE-IDENTITY .1.3.6.1.4.1.22764.1 |
plc OBJECT IDENTIFIER .1.3.6.1.4.1.22764.1.1 |
stats OBJECT IDENTIFIER .1.3.6.1.4.1.22764.1.1.1 |
portStatsTableThis table gathers all statistic data specific to SPC200 chip relative to plc connection. SEQUENCE OF PortStatsEntry .1.3.6.1.4.1.22764.1.1.1.2 |
portStatsEntryThis row contains statistic data specific to SPC200 chip relative to a connection. PortStatsEntry .1.3.6.1.4.1.22764.1.1.1.2.1 |
portStatsBandIndexThe band number on which the signal, noise, ber data are collected. BandValue .1.3.6.1.4.1.22764.1.1.1.2.1.1 |
portStatsGroupIndexThe group number on which the signal, noise, ber data are collected GroupValue .1.3.6.1.4.1.22764.1.1.1.2.1.2 |
portStatsCarrierIndexThe group number on which the signal, noise, ber data are collected CarrierValue .1.3.6.1.4.1.22764.1.1.1.2.1.3 |
portStatsSignalThe DB value of the signal associated with the carrier wave entry.ro Counter32 .1.3.6.1.4.1.22764.1.1.1.2.1.4 |
portStatsNoiseThe DB value of the noise associated with the carrier wave entry.ro Counter32 .1.3.6.1.4.1.22764.1.1.1.2.1.5 |
portStats2TableThis table gathers all statistic data specific to SPC200 chip relative to plc channels. This table has the same information as the portChannelStatsTable but in a more compact way. This table has been added to deal with possible slow performances. SEQUENCE OF PortStats2Entry .1.3.6.1.4.1.22764.1.1.1.3 |
portStats2EntryThis row contains statistic data specific to SPC200 chip relative to a connection. PortStats2Entry .1.3.6.1.4.1.22764.1.1.1.3.1 |
portStats2SignalThe values of the signal for all the carrier waves. The expected format is VALUE VALUE VALUE ... VALUE. Each value is coded on two bytes. There is one value for each 128 carriers of the considered band.ro OCTET STRING .1.3.6.1.4.1.22764.1.1.1.3.1.1 |
portStats2NoiseThe values of the noise for all the carrier waves. The expected format is VALUE VALUE VALUE ... VALUE. Each value is coded on two bytes. There is one value for each 128 carriers of the considered band.ro OCTET STRING .1.3.6.1.4.1.22764.1.1.1.3.1.2 |
portStats2AvgBandAttAverage attenuation per band (dB).ro Counter32 .1.3.6.1.4.1.22764.1.1.1.3.1.3 |
portStats2AvgBandSNRAverage SNR per band (dB).ro Counter32 .1.3.6.1.4.1.22764.1.1.1.3.1.4 |
portStats3TableThis table gathers all statistic data specific to SPC200 chip relative to plc channels. This table has the same information as the portChannelStatsTable but in a more compact way. This table has been added to deal with possible slow performances. SEQUENCE OF PortStats3Entry .1.3.6.1.4.1.22764.1.1.1.4 |
portStats3EntryThis row contains statistic data specific to SPC200 chip relative to a connection. PortStats3Entry .1.3.6.1.4.1.22764.1.1.1.4.1 |
portStats3AvgAttAverage attenuation on the link (dB).ro Counter32 .1.3.6.1.4.1.22764.1.1.1.4.1.1 |
portStats3AvgSNRAverage SNR on the link (dB).ro Counter32 .1.3.6.1.4.1.22764.1.1.1.4.1.2 |
bootstatsboot statistics OBJECT IDENTIFIER .1.3.6.1.4.1.22764.1.1.1.5 |
bootstatsBootBootro Counter32 .1.3.6.1.4.1.22764.1.1.1.5.1 |
bootstatsManualResetManual resetro Counter32 .1.3.6.1.4.1.22764.1.1.1.5.2 |
bootstatsFailureResetFailure resetro Counter32 .1.3.6.1.4.1.22764.1.1.1.5.3 |
plcObjects OBJECT IDENTIFIER .1.3.6.1.4.1.22764.1.1.2 |
plcModePlc Moderw PlcModeType --PR01 .1.3.6.1.4.1.22764.1.1.2.1 |
plcTopo OBJECT IDENTIFIER .1.3.6.1.4.1.22764.1.1.2.2 |
plcTopoChangesThe total number of topology changes detected by this plc bridge since the management entity was last reset or initialized. Such changes concerns only - the plcBasePortTable rows - the plcBasePortTable columns except for plcBasePortChannelEstimationro Counter32 .1.3.6.1.4.1.22764.1.1.2.2.1 |
plcBasePortTableThis table contains the list of plc remote connection SEQUENCE OF PlcBasePortEntry .1.3.6.1.4.1.22764.1.1.2.2.2 |
plcBasePortEntryThis row contains plc remote connection information PlcBasePortEntry .1.3.6.1.4.1.22764.1.1.2.2.2.1 |
plcBasePortIndexThe MAC address of the MAC layer above the plc interface of the remote PLC equipment. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.22764.1.1.2.2.2.1.1 |
plcBasePortAddressThe MAC address of the MAC layer above the plc interface of the remote PLC equipment.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.22764.1.1.2.2.2.1.2 |
plcBasePortChannelEstimationEnable or disable the automatic channel estimation processus.rw EstimationMode .1.3.6.1.4.1.22764.1.1.2.2.2.1.3 |
plcBasePortAttenuationLink attenuation (dB).ro Counter32 .1.3.6.1.4.1.22764.1.1.2.2.2.1.4 |
plcChannelModulationStringTableThis table contains string values for a quick access to the modulation amplitude configurations of all active channels. SEQUENCE OF PlcChannelModulationStringEntry .1.3.6.1.4.1.22764.1.1.2.2.3 |
plcChannelModulationStringEntryThis row contains string values for a quick access to the modulation amplitude configuration of each active channel of the remote connection referenced by plcBasePortIndex. PlcChannelModulationStringEntry .1.3.6.1.4.1.22764.1.1.2.2.3.1 |
plcRxChannelModulationThe modulation amplitude values for the Rx channel of a given remote connection entry. The expected format is VALUE VALUE VALUE ... VALUE. Each value is an octet representing two modulation values. Each modulation is coded on 4 bits. There are ( 16 groups * 7 bands ) / 2 = 66 values.ro OCTET STRING .1.3.6.1.4.1.22764.1.1.2.2.3.1.1 |
plcRxLastChannelModulationThe modulation amplitude values for the Rx Last channel of a given remote connection entry. The expected format is VALUE VALUE VALUE ... VALUE. Each value is an octet representing two modulation values. Each modulation is coded on 4 bits representing ModulationValue - 1. There are ( 16 groups * 7 bands ) / 2 = 66 values.ro OCTET STRING .1.3.6.1.4.1.22764.1.1.2.2.3.1.2 |
plcTxChannelModulationThe modulation amplitude values for the Tx channel of a given remote connection entry. The expected format is VALUE VALUE VALUE ... VALUE. Each value is an octet representing two modulation values. Each modulation is coded on 4 bits. There are ( 16 groups * 7 bands ) / 2 = 66 values.ro OCTET STRING .1.3.6.1.4.1.22764.1.1.2.2.3.1.3 |
plcChannelModulationTableThis table contains the modulation amplitude configuration of all active channels. SEQUENCE OF PlcChannelModulationEntry .1.3.6.1.4.1.22764.1.1.2.2.4 |
plcChannelModulationEntryThis row contains modulation amplitude configuration of the channel, referenced by the plcPortChannelIndex, of the remote connection referenced by plcBasePortIndex. PlcChannelModulationEntry .1.3.6.1.4.1.22764.1.1.2.2.4.1 |
plcModBandIndexThe band number of which the modulations are defined BandValue .1.3.6.1.4.1.22764.1.1.2.2.4.1.1 |
plcModGroup1The modulation amplitude of the first group of the band entry of the channel entry for a given remote connection entry.ro ModulationValue .1.3.6.1.4.1.22764.1.1.2.2.4.1.2 |
plcModGroup2The modulation amplitude of the second group of the band entry of the channel entry for a given remote connection entry.ro ModulationValue .1.3.6.1.4.1.22764.1.1.2.2.4.1.3 |
plcModGroup3The modulation amplitude of the third group of the band entry of the channel entry for a given remote connection entry.ro ModulationValue .1.3.6.1.4.1.22764.1.1.2.2.4.1.4 |
plcModGroup4The modulation amplitude of the fourth group of the band entry of the channel entry for a given remote connection entry.ro ModulationValue .1.3.6.1.4.1.22764.1.1.2.2.4.1.5 |
plcModGroup5The modulation amplitude of the fifth group of the band entry of the channel entry for a given remote connection entry.ro ModulationValue .1.3.6.1.4.1.22764.1.1.2.2.4.1.6 |
plcModGroup6The modulation amplitude of the sixth group of the band entry of the channel entry for a given remote connection entry.ro ModulationValue .1.3.6.1.4.1.22764.1.1.2.2.4.1.7 |
plcModGroup7The modulation amplitude of the seventh group of the band entry of the channel entry for a given remote connection entry.ro ModulationValue .1.3.6.1.4.1.22764.1.1.2.2.4.1.8 |
plcModGroup8The modulation amplitude of the eighth group of the band entry of the channel entry for a given remote connection entry.ro ModulationValue .1.3.6.1.4.1.22764.1.1.2.2.4.1.9 |
plcModGroup9The modulation amplitude of the nineth group of the band entry of the channel entry for a given remote connection entry.ro ModulationValue .1.3.6.1.4.1.22764.1.1.2.2.4.1.10 |
plcModGroup10The modulation amplitude of the tenth group of the band entry of the channel entry for a given remote connection entry.ro ModulationValue .1.3.6.1.4.1.22764.1.1.2.2.4.1.11 |
plcModGroup11The modulation amplitude of the eleventh group of the band entry of the channel entry for a given remote connection entry.ro ModulationValue .1.3.6.1.4.1.22764.1.1.2.2.4.1.12 |
plcModGroup12The modulation amplitude of the twelveth group of the band entry of the channel entry for a given remote connection entry.ro ModulationValue .1.3.6.1.4.1.22764.1.1.2.2.4.1.13 |
plcModGroup13The modulation amplitude of the thirteenth group of the band entry of the channel entry for a given remote connection entry.ro ModulationValue .1.3.6.1.4.1.22764.1.1.2.2.4.1.14 |
plcModGroup14The modulation amplitude of the fourteenth group of the band entry of the channel entry for a given remote connection entry.ro ModulationValue .1.3.6.1.4.1.22764.1.1.2.2.4.1.15 |
plcModGroup15The modulation amplitude of the fifteenth group of the band entry of the channel entry for a given remote connection entry.ro ModulationValue .1.3.6.1.4.1.22764.1.1.2.2.4.1.16 |
plcModGroup16The modulation amplitude of the sixteenth group of the band entry of the channel entry for a given remote connection entry.ro ModulationValue .1.3.6.1.4.1.22764.1.1.2.2.4.1.17 |
plcChannelModulationInput OBJECT IDENTIFIER .1.3.6.1.4.1.22764.1.1.2.2.5 |
plcModulationInputAddrThe MAC address of the MAC layer above the plc interface of the remote PLC equipment for which the modulation value changes are requested.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.22764.1.1.2.2.5.1 |
plcModulationInputChannelThe channel type of the remote PLC equipment for which the modulation value changes are requested.rw PlcChannelType .1.3.6.1.4.1.22764.1.1.2.2.5.2 |
plcModulationInputBandThe band number of which the modulation value changes are requested.rw BandValue .1.3.6.1.4.1.22764.1.1.2.2.5.3 |
plcInputModulationGroup1The new requested modulation amplitude of the first group of the considered band and channel input values.rw ModulationValue .1.3.6.1.4.1.22764.1.1.2.2.5.4 |
plcInputModulationGroup2The new requested modulation amplitude of the second group of the considered band and channel input values.rw ModulationValue .1.3.6.1.4.1.22764.1.1.2.2.5.5 |
plcInputModulationGroup3The new requested modulation amplitude of the third group of the considered band and channel input values.rw ModulationValue .1.3.6.1.4.1.22764.1.1.2.2.5.6 |
plcInputModulationGroup4The new requested modulation amplitude of the fourth group of the considered band and channel input values.rw ModulationValue .1.3.6.1.4.1.22764.1.1.2.2.5.7 |
plcInputModulationGroup5The new requested modulation amplitude of the fifth group of the considered band and channel input values.rw ModulationValue .1.3.6.1.4.1.22764.1.1.2.2.5.8 |
plcInputModulationGroup6The new requested modulation amplitude of the sixth group of the considered band and channel input values.rw ModulationValue .1.3.6.1.4.1.22764.1.1.2.2.5.9 |
plcInputModulationGroup7The new requested modulation amplitude of the seventh group of the considered band and channel input values.rw ModulationValue .1.3.6.1.4.1.22764.1.1.2.2.5.10 |
plcInputModulationGroup8The new requested modulation amplitude of the eighth group of the considered band and channel input values.rw ModulationValue .1.3.6.1.4.1.22764.1.1.2.2.5.11 |
plcInputModulationGroup9The new requested modulation amplitude of the nineth group of the considered band and channel input values.rw ModulationValue .1.3.6.1.4.1.22764.1.1.2.2.5.12 |
plcInputModulationGroup10The new requested modulation amplitude of the tenth group of the considered band and channel input values.rw ModulationValue .1.3.6.1.4.1.22764.1.1.2.2.5.13 |
plcInputModulationGroup11The new requested modulation amplitude of the eleventh group of the considered band and channel input values.rw ModulationValue .1.3.6.1.4.1.22764.1.1.2.2.5.14 |
plcInputModulationGroup12The new requested modulation amplitude of the twelveth group of the considered band and channel input values.rw ModulationValue .1.3.6.1.4.1.22764.1.1.2.2.5.15 |
plcInputModulationGroup13The new requested modulation amplitude of the thirteenth group of the considered band and channel input values.rw ModulationValue .1.3.6.1.4.1.22764.1.1.2.2.5.16 |
plcInputModulationGroup14The new requested modulation amplitude of the fourteenth group of the considered band and channel input values.rw ModulationValue .1.3.6.1.4.1.22764.1.1.2.2.5.17 |
plcInputModulationGroup15The new requested modulation amplitude of the fifteenth group of the considered band and channel input values.rw ModulationValue .1.3.6.1.4.1.22764.1.1.2.2.5.18 |
plcInputModulationGroup16The new requested modulation amplitude of the sixteenth group of the considered band and channel input values.rw ModulationValue .1.3.6.1.4.1.22764.1.1.2.2.5.19 |
plcModulationInputProceedTrue to request a modification of all the modulations associated to a band and a channel of a remote PLC equipment.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.22764.1.1.2.2.5.20 |
plcModulationInputResultResult value of the requested modulation value changes.ro ResultValue .1.3.6.1.4.1.22764.1.1.2.2.5.21 |
plcPortChannelTableThis table contains the list of plc channels SEQUENCE OF PlcPortChannelEntry .1.3.6.1.4.1.22764.1.1.2.2.6 |
plcPortChannelEntryThis row contains plc channel information PlcPortChannelEntry .1.3.6.1.4.1.22764.1.1.2.2.6.1 |
plcPortChannelIndexThe channel number belongs to the remote connection with plc equipment associated with the plcBasePortIndex value. Only three channels are expected. Index 1 for RX channel Index 2 for RXLast channel index 3 for TX channel Unsigned32 .1.3.6.1.4.1.22764.1.1.2.2.6.1.1 |
plcPortChannelTypeThe channel type.ro PlcChannelType .1.3.6.1.4.1.22764.1.1.2.2.6.1.2 |
plcPortChannelGainThe gain associated with the channel.rw Integer32 .1.3.6.1.4.1.22764.1.1.2.2.6.1.3 |
plcPortChannelBandwidthThe bandwidth of the channel in Kbit/s.ro ChannelBandwidthValue .1.3.6.1.4.1.22764.1.1.2.2.6.1.4 |
plcPortChannelMaxBandwidthThe maximum bandwidth of the channel in Kbit/s.ro ChannelBandwidthValue .1.3.6.1.4.1.22764.1.1.2.2.6.1.5 |
plcPortChannelSynchronizationBandThe synchronization band used for this channel.ro BandValue .1.3.6.1.4.1.22764.1.1.2.2.6.1.6 |
plcChannelPilotStringTableThis table contains the string values representing of pilot values of all active channels. SEQUENCE OF PlcChannelPilotStringEntry .1.3.6.1.4.1.22764.1.1.2.2.7 |
plcChannelPilotStringEntryThis row contains a quick access for pilot values , of the remote connection referenced by plcBasePortIndex. PlcChannelPilotStringEntry .1.3.6.1.4.1.22764.1.1.2.2.7.1 |
plcRxChannelPilotsThe carrier wave numbers which support the pilot waves for the Rx Channel. The expected format is VALUE VALUE VALUE ... VALUE. Each value is a pair of octets representing the pilot values. There is one pair (pilot1 pilot2) for each of the 7 bands.ro OCTET STRING .1.3.6.1.4.1.22764.1.1.2.2.7.1.1 |
plcRxLastChannelPilotsThe carrier wave numbers which support the pilot waves for the Rx Last Channel. The expected format is VALUE VALUE VALUE ... VALUE. Each value is a pair of octets representing the pilot values. There is one pair (pilot1 pilot2) for each of the 7 bands.ro OCTET STRING .1.3.6.1.4.1.22764.1.1.2.2.7.1.2 |
plcTxChannelPilotsThe carrier wave numbers which support the pilot waves for the Tx Channel. The expected format is VALUE VALUE VALUE ... VALUE. Each value is a pair of octets representing the pilot values. There is one pair (pilot1 pilot2) for each of the 7 bands.ro OCTET STRING .1.3.6.1.4.1.22764.1.1.2.2.7.1.3 |
plcChannelPilotsTableThis tabel contains pilots configuration for each plc channel. SEQUENCE OF PlcChannelPilotsEntry .1.3.6.1.4.1.22764.1.1.2.2.8 |
plcChannelPilotsEntryThis row contains the pilots 1 and 2 configuration for a channel defined by the couple (plcBasePortIndex, plcPortChannelIndex) PlcChannelPilotsEntry .1.3.6.1.4.1.22764.1.1.2.2.8.1 |
plcChannelPilotBandIndexThe band number on which the pilots are defined. BandValue .1.3.6.1.4.1.22764.1.1.2.2.8.1.1 |
plcChannelPilot1The carrier wave number which supports the first pilot wave for the channel associated with this entry.ro PilotValue .1.3.6.1.4.1.22764.1.1.2.2.8.1.2 |
plcChannePilot2The carrier wave number which supports the second pilot wave for the channel associated with this entry.ro PilotValue .1.3.6.1.4.1.22764.1.1.2.2.8.1.3 |
plcChannelPilotsInput OBJECT IDENTIFIER .1.3.6.1.4.1.22764.1.1.2.2.9 |
plcPilotsInputAddrThe MAC address of the MAC layer above the plc interface of the remote PLC equipment for which the pilot value changes are requested.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.22764.1.1.2.2.9.1 |
plcPilotsInputChannelThe channel type of the remote PLC equipment for which the pilot value changes are requested.rw PlcChannelType .1.3.6.1.4.1.22764.1.1.2.2.9.2 |
plcPilotsInputBandThe band number of which the pilots value changes are requested.rw BandValue .1.3.6.1.4.1.22764.1.1.2.2.9.3 |
plcInputChannelPilot1The carrier wave number which supports the first pilot wave for the considered band and channel input values.rw PilotValue .1.3.6.1.4.1.22764.1.1.2.2.9.4 |
plcInputChannelPilot2The carrier wave number which supports the second pilot wave for the considered band and channel input values.rw PilotValue .1.3.6.1.4.1.22764.1.1.2.2.9.5 |
plcPilotsInputProceedTrue to request a modification of the first and second pilot associated to a band and a channel of a remote PLC equipment.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.22764.1.1.2.2.9.6 |
plcPilotsInputResultResult value of the requested pilot values changes.ro ResultValue .1.3.6.1.4.1.22764.1.1.2.2.9.7 |
plcNodeConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.22764.1.1.2.3 |
plcNodeNotchesThe values of the notches for all the node bands. The expected format is VALUE VALUE VALUE ... VALUE. Each value is an octet representing the 8 notches of each group. There is one value for each 7 * 16 bands.ro OCTET STRING .1.3.6.1.4.1.22764.1.1.2.3.1 |
plcNodeNotchesTableThis table contains Notches configuration for the SPC200 chip. SEQUENCE OF PlcNodeNotchesEntry .1.3.6.1.4.1.22764.1.1.2.3.2 |
plcNodeNotchesEntryThis row contains Notches configuration for a group. The group is defined by the couple (plcNodeNotchesGroupIndex, plcNodeNotchesBandIndex). PlcNodeNotchesEntry .1.3.6.1.4.1.22764.1.1.2.3.2.1 |
plcNodeNotchesBandIndexThe band number on which the notches are defined. BandValue .1.3.6.1.4.1.22764.1.1.2.3.2.1.1 |
plcNodeNotchesGroupIndexThe group number on which the notches are defined. GroupValue .1.3.6.1.4.1.22764.1.1.2.3.2.1.2 |
plcNodeNotchesCarrier1Tell if the first carrier of the group entry of the band entry is a notch carrier. The true value means the current carrier is a notch.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.22764.1.1.2.3.2.1.3 |
plcNodeNotchesCarrier2Tell if the second carrier of the group entry of the band entry is a notch carrier. The true value means the current carrier is a notch.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.22764.1.1.2.3.2.1.4 |
plcNodeNotchesCarrier3Tell if the third carrier of the group entry of the band entry is a notch carrier. The true value means the current carrier is a notch.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.22764.1.1.2.3.2.1.5 |
plcNodeNotchesCarrier4Tell if the fourth carrier of the group entry of the band entry is a notch carrier. The true value means the current carrier is a notch.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.22764.1.1.2.3.2.1.6 |
plcNodeNotchesCarrier5Tell if the fifth carrier of the group entry of the band entry is a notch carrier. The true value means the current carrier is a notch.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.22764.1.1.2.3.2.1.7 |
plcNodeNotchesCarrier6Tell if the sixth carrier of the group entry of the band entry is a notch carrier. The true value means the current carrier is a notch.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.22764.1.1.2.3.2.1.8 |
plcNodeNotchesCarrier7Tell if the seventh carrier of the group entry of the band entry is a notch carrier. The true value means the current carrier is a notch.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.22764.1.1.2.3.2.1.9 |
plcNodeNotchesCarrier8Tell if the eighth carrier of the group entry of the band entry is a notch carrier. The true value means the current carrier is a notch.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.22764.1.1.2.3.2.1.10 |
plcNodeNotchesInput OBJECT IDENTIFIER .1.3.6.1.4.1.22764.1.1.2.3.3 |
plcNodeNotchesInputBandThe band number on which the notches value changes are requested.rw BandValue .1.3.6.1.4.1.22764.1.1.2.3.3.1 |
plcNodeNotchesInputGroupThe group number on which the notches value changes are requested.rw GroupValue .1.3.6.1.4.1.22764.1.1.2.3.3.2 |
plcNodeNotchesInputCarrier1The first carrier of the considered group and band is a notch carrier. The true value means the current carrier is a notch.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.22764.1.1.2.3.3.3 |
plcNodeNotchesInputCarrier2The second carrier of the considered group and band is a notch carrier. The true value means the current carrier is a notch.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.22764.1.1.2.3.3.4 |
plcNodeNotchesInputCarrier3The third carrier of the considered group and band is a notch carrier. The true value means the current carrier is a notch.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.22764.1.1.2.3.3.5 |
plcNodeNotchesInputCarrier4The fourth carrier of the considered group and band is a notch carrier. The true value means the current carrier is a notch.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.22764.1.1.2.3.3.6 |
plcNodeNotchesInputCarrier5The eighth carrier of the considered group and band is a notch carrier. The true value means the current carrier is a notch.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.22764.1.1.2.3.3.7 |
plcNodeNotchesInputCarrier6The eighth carrier of the considered group and band is a notch carrier. The true value means the current carrier is a notch.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.22764.1.1.2.3.3.8 |
plcNodeNotchesInputCarrier7The seventh carrier of the considered group and band is a notch carrier. The true value means the current carrier is a notch.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.22764.1.1.2.3.3.9 |
plcNodeNotchesInputCarrier8The eighth carrier of the considered group and band is a notch carrier. The true value means the current carrier is a notch.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.22764.1.1.2.3.3.10 |
plcNodeNotchesInputProceedTrue to request a modification of the carrier notches associated to the considered group and band.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.22764.1.1.2.3.3.11 |
plcNodeNotchesInputResultResult value of the requested node carrier notches value changes.ro ResultValue .1.3.6.1.4.1.22764.1.1.2.3.3.12 |
plcNodePilotsThe values of the pilot for all the node bands. The expected format is VALUE VALUE VALUE ... VALUE. Each value is a pair of octets representing the pilot values. There is one pair (pilot1 pilot2) for each of the 7 bands.ro OCTET STRING .1.3.6.1.4.1.22764.1.1.2.3.4 |
plcNodePilotsTableThis table contains pilot values used by default on all channels. SEQUENCE OF PlcNodePilotsEntry .1.3.6.1.4.1.22764.1.1.2.3.5 |
plcNodePilotsEntryThis row contains pilot values used by default on a band. The band is defined by the index plcNodePilotsBandIndex. PlcNodePilotsEntry .1.3.6.1.4.1.22764.1.1.2.3.5.1 |
plcNodePilotsBandIndexThe band number on which the pilot values are defined. BandValue .1.3.6.1.4.1.22764.1.1.2.3.5.1.1 |
plcNodePilot1The default carrier wave number which supports the first pilot wave.ro PilotValue .1.3.6.1.4.1.22764.1.1.2.3.5.1.2 |
plcNodePilot2The default carrier wave number which supports the second pilot wave.ro PilotValue .1.3.6.1.4.1.22764.1.1.2.3.5.1.3 |
plcNodePilotsInput OBJECT IDENTIFIER .1.3.6.1.4.1.22764.1.1.2.3.6 |
plcNodePilotsInputBandThe band number on which the pilot values changes are requested.rw BandValue .1.3.6.1.4.1.22764.1.1.2.3.6.1 |
plcInputNodePilot1The default carrier wave number which supports the first pilot wave of the considered band.rw PilotValue .1.3.6.1.4.1.22764.1.1.2.3.6.2 |
plcInputNodePilot2The default carrier wave number which supports the second pilot wave of the considered band.rw PilotValue .1.3.6.1.4.1.22764.1.1.2.3.6.3 |
plcNodePilotsInputProceedTrue to request a modification of the pilot values associated to the considered band.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.22764.1.1.2.3.6.4 |
plcNodePilotsInputResultResult value of the requested node pilot values changes.ro ResultValue .1.3.6.1.4.1.22764.1.1.2.3.6.5 |
plcNodeAdaptsStringTableThis table contains string values for a quick access to the adapt configurations of all the carriers. SEQUENCE OF PlcNodeAdaptsStringEntry .1.3.6.1.4.1.22764.1.1.2.3.7 |
plcNodeAdaptsStringEntryThis row contains string values for a quick access to the adapt configuration of each carrier of a band. PlcNodeAdaptsStringEntry .1.3.6.1.4.1.22764.1.1.2.3.7.1 |
plcNodeAdaptsStringBandIndexThe band number on which the adapt values are defined. BandValue .1.3.6.1.4.1.22764.1.1.2.3.7.1.1 |
plcNodeAdaptsStringBandThe adapt values of the 128 carriers of a band. The expected format is VALUE VALUE VALUE ... VALUE. Each value is two octets representing one adapt carrier level. There are ( 16 groups * 8 carriers) = 128 values.ro OCTET STRING .1.3.6.1.4.1.22764.1.1.2.3.7.1.2 |
plcNodeAdaptsTableThis table contains adapt level configuration for each carrier of the node. SEQUENCE OF PlcNodeAdaptsEntry .1.3.6.1.4.1.22764.1.1.2.3.8 |
plcNodeAdaptsEntryThis row contains adapt level values for a group of carriers. The group is defined by the couple (plcNodeAdaptsBandIndex,plcNodeAdaptsGroupIndex). PlcNodeAdaptsEntry .1.3.6.1.4.1.22764.1.1.2.3.8.1 |
plcNodeAdaptsBandIndexThe band number on which the adapt values are defined. BandValue .1.3.6.1.4.1.22764.1.1.2.3.8.1.1 |
plcNodeAdaptsGroupIndexThe group number on which the adapt values are defined. GroupValue .1.3.6.1.4.1.22764.1.1.2.3.8.1.2 |
plcNodeAdaptsCarrier1The adapt level of the first carrier of the group.ro AdaptValue .1.3.6.1.4.1.22764.1.1.2.3.8.1.3 |
plcNodeAdaptsCarrier2The adapt level of the second carrier of the group.ro AdaptValue .1.3.6.1.4.1.22764.1.1.2.3.8.1.4 |
plcNodeAdaptsCarrier3The adapt level of the third carrier of the group.ro AdaptValue .1.3.6.1.4.1.22764.1.1.2.3.8.1.5 |
plcNodeAdaptsCarrier4The adapt level of the fourth carrier of the group.ro AdaptValue .1.3.6.1.4.1.22764.1.1.2.3.8.1.6 |
plcNodeAdaptsCarrier5The adapt level of the fifth carrier of the group.ro AdaptValue .1.3.6.1.4.1.22764.1.1.2.3.8.1.7 |
plcNodeAdaptsCarrier6The adapt level of the sixth carrier of the group.ro AdaptValue .1.3.6.1.4.1.22764.1.1.2.3.8.1.8 |
plcNodeAdaptsCarrier7The adapt level of the seventh carrier of the group.ro AdaptValue .1.3.6.1.4.1.22764.1.1.2.3.8.1.9 |
plcNodeAdaptsCarrier8The adapt level of the eighth carrier of the group.ro AdaptValue .1.3.6.1.4.1.22764.1.1.2.3.8.1.10 |
plcNodeAdaptsInput OBJECT IDENTIFIER .1.3.6.1.4.1.22764.1.1.2.3.9 |
plcNodeAdaptsInputBandThe band number on which the adapt level value changes are requested.rw BandValue .1.3.6.1.4.1.22764.1.1.2.3.9.1 |
plcNodeAdaptsInputGroupThe group number on which the adapt level value changes are requested.rw GroupValue .1.3.6.1.4.1.22764.1.1.2.3.9.2 |
plcNodeAdaptsInputCarrier1The adapt level of the first carrier of the considered group of the chosen band.rw AdaptValue .1.3.6.1.4.1.22764.1.1.2.3.9.3 |
plcNodeAdaptsInputCarrier2The adapt level of the second carrier of the considered group of the chosen band.rw AdaptValue .1.3.6.1.4.1.22764.1.1.2.3.9.4 |
plcNodeAdaptsInputCarrier3The adapt level of the third carrier of the considered group of the chosen band.rw AdaptValue .1.3.6.1.4.1.22764.1.1.2.3.9.5 |
plcNodeAdaptsInputCarrier4The adapt level of the fourth carrier of the considered group of the chosen band.rw AdaptValue .1.3.6.1.4.1.22764.1.1.2.3.9.6 |
plcNodeAdaptsInputCarrier5The adapt level of the fifth carrier of the considered group of the chosen band.rw AdaptValue .1.3.6.1.4.1.22764.1.1.2.3.9.7 |
plcNodeAdaptsInputCarrier6The adapt level of the sixth carrier of the considered group of the chosen band.rw AdaptValue .1.3.6.1.4.1.22764.1.1.2.3.9.8 |
plcNodeAdaptsInputCarrier7The adapt level of the seventh carrier of the considered group of the chosen band.rw AdaptValue .1.3.6.1.4.1.22764.1.1.2.3.9.9 |
plcNodeAdaptsInputCarrier8The adapt level of the eighth carrier of the considered group of the chosen band.rw AdaptValue .1.3.6.1.4.1.22764.1.1.2.3.9.10 |
plcNodeAdaptsInputProceedTrue to request a modification of the carrier adapt level associated to the considered group and band.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.22764.1.1.2.3.9.11 |
plcNodeAdaptsInputResultResult value of the requested node adapt level value changes.ro ResultValue .1.3.6.1.4.1.22764.1.1.2.3.9.12 |
plcNodeNetConfigTableThis table contains ip and mac addresses of the node. SEQUENCE OF PlcNodeNetConfigEntry .1.3.6.1.4.1.22764.1.1.2.3.10 |
plcNodeNetConfigEntryThis row contains ip and mac address used by an interface. PlcNodeNetConfigEntry .1.3.6.1.4.1.22764.1.1.2.3.10.1 |
plcNodeIpAddrThe IP address of the IP layer above the interface.rw IpAddress .1.3.6.1.4.1.22764.1.1.2.3.10.1.1 |
plcNodeNetMaskThe IP Subnet mask of the IP layer above the interface.rw IpAddress .1.3.6.1.4.1.22764.1.1.2.3.10.1.2 |
plcNodeMacAddrThe MAC address of the MAC layer above the interface.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.22764.1.1.2.3.10.1.3 |
plcNodeGatewayThe Gateway address of the IP layer above the interface.rw IpAddress .1.3.6.1.4.1.22764.1.1.2.3.10.1.4 |
plcNodeActions OBJECT IDENTIFIER .1.3.6.1.4.1.22764.1.1.2.3.11 |
plcNodeActionsCommit OBJECT IDENTIFIER .1.3.6.1.4.1.22764.1.1.2.3.11.1 |
plcNodeActionsCommitProceedTrue to request the commit of the configuration changes into the flash memoryrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.22764.1.1.2.3.11.1.1 |
plcNodeActionsCommitResultResult value of the requested flash commit operation.ro ResultValue .1.3.6.1.4.1.22764.1.1.2.3.11.1.2 |
plcNodeActionsReset OBJECT IDENTIFIER .1.3.6.1.4.1.22764.1.1.2.3.11.2 |
plcNodeActionsResetProceedTrue to request the reset of the node. This operation will terminate the communication between the manager and the noderw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.22764.1.1.2.3.11.2.1 |
plcNodeActionsCarrier OBJECT IDENTIFIER .1.3.6.1.4.1.22764.1.1.2.3.11.3 |
plcNodeActionsCarrierFlatProceedTrue to request the equipment to flat the signalrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.22764.1.1.2.3.11.3.1 |
plcSNAnalyser OBJECT IDENTIFIER .1.3.6.1.4.1.22764.1.1.2.4 |
plcSNAnalyserEnabletrue if the modem should turn to spectrum analyser mode. In this mode the modem enters a receive only mode, and captures periodic samples of the signal on the powerline. The spectrum analyser mode shall be disabled for normal powerline modem operation.rw Enumeration .1.3.6.1.4.1.22764.1.1.2.4.1 |
plcSNAnalyserTableThis table gathers all statistic data specific to SPC200 chip relative to plc analyser. SEQUENCE OF PlcSNAnalyserEntry .1.3.6.1.4.1.22764.1.1.2.4.2 |
plcSNAnalyserEntryThis row contains statistic data specific to SPC200 chip relative to a band. PlcSNAnalyserEntry .1.3.6.1.4.1.22764.1.1.2.4.2.1 |
plcSNAnalyserMinSignalMinimum signal measured over several samples for the associated carrier wave entry. The value is expressed in Glomer which can be converted in dBm/Hz using the following formula: dBm/Hz = 19*log10(Glomer) - 113ro OCTET STRING .1.3.6.1.4.1.22764.1.1.2.4.2.1.1 |
plcSNAnalyserMaxSignalMaximum signal measured on several samples for the associated carrier wave entry. The value is expressed in Glomer which can be converted in dBm/Hz using the following formula: dBm/Hz = 19*log10(Glomer) - 113ro OCTET STRING .1.3.6.1.4.1.22764.1.1.2.4.2.1.2 |
plcSNAnalyserAvgSignalAverage signal measured on several samples for the associated carrier wave entry. The value is expressed in Glomer which can be converted in dBm/Hz using the following formula: dBm/Hz = 19*log10(Glomer) - 113ro OCTET STRING .1.3.6.1.4.1.22764.1.1.2.4.2.1.3 |
plcSNAnalyserLastSignalSignal measured for last sample on the associated carrier wave entry. The value is expressed in Glomer which can be converted in dBm/Hz using the following formula: dBm/Hz = 19*log10(Glomer) - 113ro OCTET STRING .1.3.6.1.4.1.22764.1.1.2.4.2.1.4 |
plcSNAnalyserFFTDivFFT division factor on the associated band.ro Counter32 .1.3.6.1.4.1.22764.1.1.2.4.2.1.5 |
plcSNAnalyserAGCGain factor in dB, as used by the Automatic Gain Control last samplero Integer32 ( 0..255 ) .1.3.6.1.4.1.22764.1.1.2.4.3 |
plcAGCAnalyser OBJECT IDENTIFIER .1.3.6.1.4.1.22764.1.1.2.5 |
plcAGCAnalyserEnablerw Enumeration .1.3.6.1.4.1.22764.1.1.2.5.1 |
plcAGCAnalyserSamplesPart1ro OCTET STRING .1.3.6.1.4.1.22764.1.1.2.5.2 |
plcAGCAnalyserSamplesPart2ro OCTET STRING .1.3.6.1.4.1.22764.1.1.2.5.3 |
plcBssId OBJECT IDENTIFIER .1.3.6.1.4.1.22764.1.1.2.6 |
plcMasterBssIdThe value of the master Bss Idrw INTEGER .1.3.6.1.4.1.22764.1.1.2.6.1 |
plcSlaveBssIdThe value of the slave Bss Idrw INTEGER .1.3.6.1.4.1.22764.1.1.2.6.2 |
plcSpy OBJECT IDENTIFIER .1.3.6.1.4.1.22764.1.1.2.7 |
plcSpyIsDynamicTrue to set the spy dynamic moderw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.22764.1.1.2.7.1 |
plcStaticSpySynchBandNbThe synchronization band number used for static spy moderw BandValue .1.3.6.1.4.1.22764.1.1.2.7.2 |
softwareMgnt OBJECT IDENTIFIER .1.3.6.1.4.1.22764.1.1.3 |
currentSoftwareVersionThe name of the current software release.ro DisplayString .1.3.6.1.4.1.22764.1.1.3.1 |
currentSoftwareBoardVersionThe name of the current software board release.ro DisplayString .1.3.6.1.4.1.22764.1.1.3.2 |
currentSoftwareAFEVersionThe name of the current software Analog Front End release.ro DisplayString .1.3.6.1.4.1.22764.1.1.3.3 |
softwareTableThis table contains the current and reserve softwares of the node. SEQUENCE OF SoftwareEntry .1.3.6.1.4.1.22764.1.1.3.4 |
softwareEntryThis row contains software information. SoftwareEntry .1.3.6.1.4.1.22764.1.1.3.4.1 |
softwareIndexThe index number of the software. SoftwareIndex .1.3.6.1.4.1.22764.1.1.3.4.1.1 |
softwareVersionThe name of the software release.ro DisplayString .1.3.6.1.4.1.22764.1.1.3.4.1.2 |
softwareUpload OBJECT IDENTIFIER .1.3.6.1.4.1.22764.1.1.3.5 |
softwareUploadTFTPServerIPThe IP address of the TFTP serveurrw IpAddress .1.3.6.1.4.1.22764.1.1.3.5.1 |
softwareUploadLoginThe user login on the TFTP serverrw DisplayString .1.3.6.1.4.1.22764.1.1.3.5.2 |
softwareUploadPasswordThe user password on the TFTP server. Warning: This field is displayed using 6 * charactersrw DisplayString .1.3.6.1.4.1.22764.1.1.3.5.3 |
softwareUploadFileNameThe software file name to uploadrw DisplayString .1.3.6.1.4.1.22764.1.1.3.5.4 |
softwareUploadProceedTrue to request the uploading to startrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.22764.1.1.3.5.5 |
softwareUploadResultResult value of the requested uploadingro SoftwareActionResultValue .1.3.6.1.4.1.22764.1.1.3.5.6 |
softwareUploadTFTPServerPortThe service port of the TFTP serverrw Integer32 ( 0..65535 ) .1.3.6.1.4.1.22764.1.1.3.5.7 |
softwareAction OBJECT IDENTIFIER .1.3.6.1.4.1.22764.1.1.3.6 |
softwareActionIndexThe index of the reserve softwarerw SoftwareIndex .1.3.6.1.4.1.22764.1.1.3.6.1 |
softwareActionTypeType of the software action software: switch, removerw SoftwareActionType .1.3.6.1.4.1.22764.1.1.3.6.2 |
softwareActionProceedTrue to request the switch between the current and the reserver software to startrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.22764.1.1.3.6.3 |
softwareActionResultResult value of the requested actionro SoftwareActionResultValue .1.3.6.1.4.1.22764.1.1.3.6.4 |
plcConformance OBJECT IDENTIFIER .1.3.6.1.4.1.22764.1.1.4 |
plcCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.22764.1.1.4.1 |
plcComplianceThe compliance statement for SPC200 chip. Unknown .1.3.6.1.4.1.22764.1.1.4.1.1 |
plcGroups OBJECT IDENTIFIER .1.3.6.1.4.1.22764.1.1.4.2 |
nodeGroupA collection of objects providing node configuration information. Unknown .1.3.6.1.4.1.22764.1.1.4.2.1 |
inputNodeGroupA collection of objects used to request node configuration information changes. Unknown .1.3.6.1.4.1.22764.1.1.4.2.2 |
topologyGroupA collection of objects providing topology configuration. Unknown .1.3.6.1.4.1.22764.1.1.4.2.3 |
inputTopologyGroupA collection of objects used to request topology configuration changes. Unknown .1.3.6.1.4.1.22764.1.1.4.2.4 |
statisticGroupA collection of objects providing statistic data on node and plc link performances. Unknown .1.3.6.1.4.1.22764.1.1.4.2.5 |
softwareGroupA collection of objects providing software management Unknown .1.3.6.1.4.1.22764.1.1.4.2.6 |
analyserGroupA collection of objects providing spectrum analyser data Unknown .1.3.6.1.4.1.22764.1.1.4.2.7 |
agentCapabilitiesThe SPC200 chip SNMP agent capabilities Unknown .1.3.6.1.4.1.22764.1.1.4.3 |
ipExtExtended ip needed for SPiDCOM functionalities OBJECT IDENTIFIER .1.3.6.1.4.1.22764.1.4 |
ipDynamicTrue if Ip address is set dynamicallyrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.22764.1.4.1 |
ipExtGroupThe fields needed by the SPiDCOM functionalities Unknown .1.3.6.1.4.1.22764.1.4.2 |