SPEEDSINGLELINE-XFP-MIB
AI MIB Summary
The SPEEDSINGLELINE-XFP-MIB provides SNMP management objects for monitoring the operational status, performance counters, and physical layer parameters of the SPEED-SingleLine XFP (3R) optical transceiver card. It enables administrators to track critical metrics such as optical power levels, temperature, voltage, and signal integrity to ensure the reliability of high-speed single-line fiber interfaces.
MIB objects for the SPEED-SingleLine XFP (3R) card
Main OID:
convSpeedSingleLineXFP.1.3.6.1.4.1.3652.3.3.2
129
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
129 total| Object Name |
|---|
convSpeedSingleLineXFPMIB objects for the SPEED-SingleLine XFP (3R) card MODULE-IDENTITY .1.3.6.1.4.1.3652.3.3.2 |
convSSLXFPModuleOverviewTableSPEED-SINGLELINE XFP Module Overview Table SEQUENCE OF ConvSSLXFPModuleOverviewEntry .1.3.6.1.4.1.3652.3.3.2.1 |
convSSLXFPModuleOverviewEntryModule Overview Entries ConvSSLXFPModuleOverviewEntry .1.3.6.1.4.1.3652.3.3.2.1.1 |
convSSLXFPMSlotSlot number in Carrierro Integer32 .1.3.6.1.4.1.3652.3.3.2.1.1.2 |
convSSLXFPMDeviceModule DeviceTypero Enumeration .1.3.6.1.4.1.3652.3.3.2.1.1.3 |
convSSLXFPMStatusReset States of Modulerw Enumeration .1.3.6.1.4.1.3652.3.3.2.1.1.4 |
convSSLXFPMSysUpTimeSystem Up Time in Secondsro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.3652.3.3.2.1.1.5 |
convSSLXFPMTempModule Temperaturero Integer32 .1.3.6.1.4.1.3652.3.3.2.1.1.6 |
convSSLXFPMAlarmStateModule Alarm States, if there are active see Event-Table. The activeAlarms with extension HXX means a internal HEX representative of the alarm.ro Enumeration .1.3.6.1.4.1.3652.3.3.2.1.1.7 |
convSSLXFPMSerialNumberModules Serial Numberro DisplayString .1.3.6.1.4.1.3652.3.3.2.1.1.8 |
convSSLXFPModuleImagesOverviewTableSPEED-SINGLELINE XFP Module Images Table SEQUENCE OF ConvSSLXFPModuleImagesOverviewEntry .1.3.6.1.4.1.3652.3.3.2.2 |
convSSLXFPModuleImagesOverviewEntryModule Images Overview Entries ConvSSLXFPModuleImagesOverviewEntry .1.3.6.1.4.1.3652.3.3.2.2.1 |
convSSLXFPSWSlotSlot number in Carrierro Integer32 .1.3.6.1.4.1.3652.3.3.2.2.1.2 |
convSSLXFPSWBootImageIdentification of Bootimagero DisplayString .1.3.6.1.4.1.3652.3.3.2.2.1.3 |
convSSLXFPSWAppImage1Identification of Application Image1ro DisplayString .1.3.6.1.4.1.3652.3.3.2.2.1.4 |
convSSLXFPSWAppImage2Identification of Application Image2ro DisplayString .1.3.6.1.4.1.3652.3.3.2.2.1.5 |
convSSLXFPSWUploadStatusControl and Status of UploadProcedurero Enumeration .1.3.6.1.4.1.3652.3.3.2.2.1.6 |
convSSLXFPSWUpdateStatusactivates SW-Image after netxt resetro Enumeration .1.3.6.1.4.1.3652.3.3.2.2.1.7 |
convSSLXFPMHWVersionIdentification of Hardware Versionro DisplayString .1.3.6.1.4.1.3652.3.3.2.2.1.8 |
convSSLXFPModuleBoardConfigTableSPEED-SINGLELINE XFP Module config Table SEQUENCE OF ConvSSLXFPModuleBoardConfigEntry .1.3.6.1.4.1.3652.3.3.2.3 |
convSSLXFPModuleBoardConfigEntryModule Overview Entries ConvSSLXFPModuleBoardConfigEntry .1.3.6.1.4.1.3652.3.3.2.3.1 |
convSSLXFPModuleSlotSlot number in Carrierro Integer32 .1.3.6.1.4.1.3652.3.3.2.3.1.2 |
convSSLXFPModulePortSpeedConfigport data rate configurationrw Enumeration .1.3.6.1.4.1.3652.3.3.2.3.1.3 |
convSSLXFPModuleTempHighWarningThis parameter is not implemented at the moment.ro Enumeration .1.3.6.1.4.1.3652.3.3.2.3.1.4 |
convSSLXFPModuleTempHighAlarmThis parameter is not implemented at the moment.ro Enumeration .1.3.6.1.4.1.3652.3.3.2.3.1.5 |
convSSLXFPModuleCliTimeouttime without user interaction before exiting CLI. Value in seconds.rw Integer32 .1.3.6.1.4.1.3652.3.3.2.3.1.6 |
convSSLXFPModuleEthPortConfigEthernet port state of Transponder cardrw Enumeration .1.3.6.1.4.1.3652.3.3.2.3.1.7 |
convSSLXFPModuleEthPortStateEthernet port config of Transponder cardro Enumeration .1.3.6.1.4.1.3652.3.3.2.3.1.8 |
convSSLXFPPortOverviewTableSPEED-SINGLELINE XFP port overview table SEQUENCE OF ConvSSLXFPPortOverviewEntry .1.3.6.1.4.1.3652.3.3.2.4 |
convSSLXFPPortOverviewEntryport overview entries ConvSSLXFPPortOverviewEntry .1.3.6.1.4.1.3652.3.3.2.4.1 |
convSSLXFPMPortIndexport index Integer32 .1.3.6.1.4.1.3652.3.3.2.4.1.1 |
convSSLXFPMPortSlotslot number of portro Integer32 .1.3.6.1.4.1.3652.3.3.2.4.1.2 |
convSSLXFPMPortPortport numberro Integer32 .1.3.6.1.4.1.3652.3.3.2.4.1.3 |
convSSLXFPMPortDesport description or port namero DisplayString .1.3.6.1.4.1.3652.3.3.2.4.1.4 |
convSSLXFPMPortAdminStateadministrativ port statusro Enumeration .1.3.6.1.4.1.3652.3.3.2.4.1.5 |
convSSLXFPMPortXFPStateXFP installed / alarm statusro Enumeration .1.3.6.1.4.1.3652.3.3.2.4.1.6 |
convSSLXFPMPortTXOperStateXFP operational/alarm statusro Enumeration .1.3.6.1.4.1.3652.3.3.2.4.1.7 |
convSSLXFPMPortRXOperStateXFP operational/alarm statusro Enumeration .1.3.6.1.4.1.3652.3.3.2.4.1.8 |
convSSLXFPMPortAlarmStatePort alarm statesro Enumeration .1.3.6.1.4.1.3652.3.3.2.4.1.9 |
convSSLXFPModulePortConfigTableSPEED-SINGLELINE XFP port config table SEQUENCE OF ConvSSLXFPModulePortConfigEntry .1.3.6.1.4.1.3652.3.3.2.5 |
convSSLXFPModulePortConfigEntryport config Entries ConvSSLXFPModulePortConfigEntry .1.3.6.1.4.1.3652.3.3.2.5.1 |
convSSLXFPMPortConfIndexport index Integer32 .1.3.6.1.4.1.3652.3.3.2.5.1.1 |
convSSLXFPMPortConfSlotslot number of portro Integer32 .1.3.6.1.4.1.3652.3.3.2.5.1.2 |
convSSLXFPMPortConfPortport numberro Integer32 .1.3.6.1.4.1.3652.3.3.2.5.1.3 |
convSSLXFPMPortAdminConfigport administrative configurationrw Enumeration .1.3.6.1.4.1.3652.3.3.2.5.1.4 |
convSSLXFPMPortDescriptionport description or port name configurationrw DisplayString .1.3.6.1.4.1.3652.3.3.2.5.1.5 |
convSSLXFPMPortLLCFConfigLink Loss Carry Forward configrw Enumeration .1.3.6.1.4.1.3652.3.3.2.5.1.6 |
convSSLXFPMPortLoopConfigport loop configurationrw Enumeration .1.3.6.1.4.1.3652.3.3.2.5.1.7 |
convSSLXFPMPortAlarmDeactivationPort alarm deactivation schedulerw Enumeration .1.3.6.1.4.1.3652.3.3.2.5.1.8 |
convSSLXFPMPortAlarmSchedulePort alarm deactivation schedule. Value in hours. After this time has elapsed, the alarms are active again.rw Integer32 .1.3.6.1.4.1.3652.3.3.2.5.1.9 |
convSSLXFPMPortOTNConfigOTN Transceiver configurationrw Enumeration .1.3.6.1.4.1.3652.3.3.2.5.1.10 |
convSSLXFPMPortOTNMappingPort alarm deactivation schedulerw Enumeration .1.3.6.1.4.1.3652.3.3.2.5.1.11 |
convSSLXFPModulePortGeneralXFPInfosTableSPEED-SINGLELINE XFP general information table SEQUENCE OF ConvSSLXFPModulePortGeneralXFPInfosEntry .1.3.6.1.4.1.3652.3.3.2.6 |
convSSLXFPModulePortGeneralXFPInfosEntryXFP general information Entries ConvSSLXFPModulePortGeneralXFPInfosEntry .1.3.6.1.4.1.3652.3.3.2.6.1 |
convSSLXFPMPortGenIndexport index Integer32 .1.3.6.1.4.1.3652.3.3.2.6.1.1 |
convSSLXFPMPortGenSlotslot number of portro Integer32 .1.3.6.1.4.1.3652.3.3.2.6.1.2 |
convSSLXFPMPortGenPortport numberro Integer32 .1.3.6.1.4.1.3652.3.3.2.6.1.3 |
convSSLXFPMPortXFPPowerclasspower class - max power consumptionro Enumeration .1.3.6.1.4.1.3652.3.3.2.6.1.4 |
convSSLXFPMPortXFPSmFiberLengthmax single mode fiber lengthro Integer32 .1.3.6.1.4.1.3652.3.3.2.6.1.5 |
convSSLXFPMPortVendorNameXFP vendor namero DisplayString .1.3.6.1.4.1.3652.3.3.2.6.1.6 |
convSSLXFPMPortSerialNumberXFP serial numberro DisplayString .1.3.6.1.4.1.3652.3.3.2.6.1.7 |
convSSLXFPMPortWavelengthXFP center wavelength at romm temperaturero DisplayString .1.3.6.1.4.1.3652.3.3.2.6.1.8 |
convSSLXFPMPortPartNumberXFP part numberro DisplayString .1.3.6.1.4.1.3652.3.3.2.6.1.9 |
convSSLXFPModulePortXFPMessurementTableSPEED-SINGLELINE XFP messurement table SEQUENCE OF ConvSSLXFPModulePortXFPMessurementEntry .1.3.6.1.4.1.3652.3.3.2.7 |
convSSLXFPModulePortXFPMessurementEntryXFP messurement Entries ConvSSLXFPModulePortXFPMessurementEntry .1.3.6.1.4.1.3652.3.3.2.7.1 |
convSSLXFPMPortMesIndexport index Integer32 .1.3.6.1.4.1.3652.3.3.2.7.1.1 |
convSSLXFPMPortMesSlotslot number of portro Integer32 .1.3.6.1.4.1.3652.3.3.2.7.1.2 |
convSSLXFPMPortMesPortport numberro Integer32 .1.3.6.1.4.1.3652.3.3.2.7.1.3 |
convSSLXFPMPortRxPowerXFP optical receive powerro Integer32 .1.3.6.1.4.1.3652.3.3.2.7.1.4 |
convSSLXFPMPortTxPowerXFP optical transmit powerro Integer32 .1.3.6.1.4.1.3652.3.3.2.7.1.5 |
convSSLXFPMPortXFPTempXFP temperaturero Integer32 .1.3.6.1.4.1.3652.3.3.2.7.1.6 |
convSSLXFPMPortTxBiasXFP TX Biasro Integer32 .1.3.6.1.4.1.3652.3.3.2.7.1.7 |
convSSLXFPMPortFECRateForward error correction error rate. The given value is the exponent 10^-xro Integer32 .1.3.6.1.4.1.3652.3.3.2.7.1.8 |
convSSLXFPModuleThresholdsConfigTableSPEED-SINGLELINE XFP Threshold config table SEQUENCE OF ConvSSLXFPModuleThresholdsConfigEntry .1.3.6.1.4.1.3652.3.3.2.8 |
convSSLXFPModuleThresholdsConfigEntryXFP threshold Entries ConvSSLXFPModuleThresholdsConfigEntry .1.3.6.1.4.1.3652.3.3.2.8.1 |
convSSLXFPMPortThresIndexport index Integer32 .1.3.6.1.4.1.3652.3.3.2.8.1.1 |
convSSLXFPMPortThresSlotslot number of portro Integer32 .1.3.6.1.4.1.3652.3.3.2.8.1.2 |
convSSLXFPMPortThresPortport numberro Integer32 .1.3.6.1.4.1.3652.3.3.2.8.1.3 |
convSSLXFPMPortRxLowAlarmLevelXFP receiver input low alarm levelro Integer32 .1.3.6.1.4.1.3652.3.3.2.8.1.4 |
convSSLXFPMPortRxHighAlarmLevelXFP receiver input high alarm levelro Integer32 .1.3.6.1.4.1.3652.3.3.2.8.1.5 |
convSSLXFPMPortRxLowWarningLevelXFP receiver input low warning levelro Integer32 .1.3.6.1.4.1.3652.3.3.2.8.1.6 |
convSSLXFPMPortRxHighWarningLevelXFP receiver input high warning levelro Integer32 .1.3.6.1.4.1.3652.3.3.2.8.1.7 |
convSSLXFPMPortTxLowAlarmLevelXFP transmitter output low alarm levelro Integer32 .1.3.6.1.4.1.3652.3.3.2.8.1.8 |
convSSLXFPMPortTxHighAlarmLevelXFP transmitter output high alarm levelro Integer32 .1.3.6.1.4.1.3652.3.3.2.8.1.9 |
convSSLXFPMPortTxLowWarningLevelXFP transmitter output low warning levelro Integer32 .1.3.6.1.4.1.3652.3.3.2.8.1.10 |
convSSLXFPMPortTxHighWarningLevelXFP transmitter output high warning levelro Integer32 .1.3.6.1.4.1.3652.3.3.2.8.1.11 |
convSSLXFPMPortTxBiasLowAlarmLevelXFP transmitter bias low alarm levelro Integer32 .1.3.6.1.4.1.3652.3.3.2.8.1.12 |
convSSLXFPMPortTxBiasHighAlarmLevelXFP transmitter bias high alarm levelro Integer32 .1.3.6.1.4.1.3652.3.3.2.8.1.13 |
convSSLXFPMPortTxBiasLowWarningLevelXFP transmitter bias low warning levelro Integer32 .1.3.6.1.4.1.3652.3.3.2.8.1.14 |
convSSLXFPMPortTxBiasHighWarningLevelXFP transmitter bias high warning levelro Integer32 .1.3.6.1.4.1.3652.3.3.2.8.1.15 |
convSSLXFPMPortTempLowAlarmLevelXFP temperature low alarm levelro Integer32 .1.3.6.1.4.1.3652.3.3.2.8.1.16 |
convSSLXFPMPortTempHighAlarmLevelXFP temperature high alarm levelro Integer32 .1.3.6.1.4.1.3652.3.3.2.8.1.17 |
convSSLXFPMPortTempLowWarningLevelXFP temperature low warning levelro Integer32 .1.3.6.1.4.1.3652.3.3.2.8.1.18 |
convSSLXFPMPortTempHighWarningLevelXFP temperature high warning levelro Integer32 .1.3.6.1.4.1.3652.3.3.2.8.1.19 |
convSSLXFPModuleEventTableSPEED-SINGLELINE XFP Threshold config table SEQUENCE OF ConvSSLXFPModuleEventEntry .1.3.6.1.4.1.3652.3.3.2.9 |
convSSLXFPModuleEventEntryXFP threshold Entries ConvSSLXFPModuleEventEntry .1.3.6.1.4.1.3652.3.3.2.9.1 |
convSSLXFPPIndexport index Integer32 .1.3.6.1.4.1.3652.3.3.2.9.1.1 |
convSSLXFPPSlotslot number of portro Integer32 .1.3.6.1.4.1.3652.3.3.2.9.1.2 |
convSSLXFPPPortport numberro Integer32 .1.3.6.1.4.1.3652.3.3.2.9.1.3 |
convSSLXFPPPortRxLowAlarmEventXFP receiver input low alarm eventro Enumeration .1.3.6.1.4.1.3652.3.3.2.9.1.4 |
convSSLXFPPPortRxHighAlarmEventXFP receiver input high alarm eventro Enumeration .1.3.6.1.4.1.3652.3.3.2.9.1.5 |
convSSLXFPPPortRxLowWarningEventXFP receiver input low warning eventro Enumeration .1.3.6.1.4.1.3652.3.3.2.9.1.6 |
convSSLXFPPPortRxHighWarningEventXFP receiver input high warning eventro Enumeration .1.3.6.1.4.1.3652.3.3.2.9.1.7 |
convSSLXFPPPortTxLowAlarmEventXFP transmitter output low alarm eventro Enumeration .1.3.6.1.4.1.3652.3.3.2.9.1.8 |
convSSLXFPPPortTxHighAlarmEventXFP transmitter output high alarm eventro Enumeration .1.3.6.1.4.1.3652.3.3.2.9.1.9 |
convSSLXFPPPortTxLowWarningEventXFP transmitter output low warning eventro Enumeration .1.3.6.1.4.1.3652.3.3.2.9.1.10 |
convSSLXFPPPortTxHighWarningEventXFP transmitter output high warning eventro Enumeration .1.3.6.1.4.1.3652.3.3.2.9.1.11 |
convSSLXFPPPortTxBiasLowAlarmEventXFP transmitter bias low alarm eventro Enumeration .1.3.6.1.4.1.3652.3.3.2.9.1.12 |
convSSLXFPPPortTxBiasHighAlarmEventXFP transmitter bias high alarm eventro Enumeration .1.3.6.1.4.1.3652.3.3.2.9.1.13 |
convSSLXFPPPortTxBiasLowWarningEventXFP transmitter bias low warning eventro Enumeration .1.3.6.1.4.1.3652.3.3.2.9.1.14 |
convSSLXFPPPortTxBiasHighWarningEventXFP transmitter bias high warning eventro Enumeration .1.3.6.1.4.1.3652.3.3.2.9.1.15 |
convSSLXFPPPortTempLowAlarmEventXFP temperature low alarm eventro Enumeration .1.3.6.1.4.1.3652.3.3.2.9.1.16 |
convSSLXFPPPortTempHighAlarmEventXFP temperature high alarm eventro Enumeration .1.3.6.1.4.1.3652.3.3.2.9.1.17 |
convSSLXFPPPortTempLowWarningEventXFP temperature low warning eventro Enumeration .1.3.6.1.4.1.3652.3.3.2.9.1.18 |
convSSLXFPPPortTempHighWarningEventXFP temperature high warning eventro Enumeration .1.3.6.1.4.1.3652.3.3.2.9.1.19 |
convSSLXFPPPortOtnAlarmEventXFP OTN Alarm eventro Enumeration .1.3.6.1.4.1.3652.3.3.2.9.1.20 |
convSSLXFPPortTunableTableSpeed-Dualline FC tunable transceiver table SEQUENCE OF ConvSSLXFPPortTunableEntry .1.3.6.1.4.1.3652.3.3.2.10 |
convSSLXFPPortTunableEntrytransceiver tunable entries ConvSSLXFPPortTunableEntry .1.3.6.1.4.1.3652.3.3.2.10.1 |
convSSLXFPPortXCVIndexport index Integer32 .1.3.6.1.4.1.3652.3.3.2.10.1.1 |
convSSLXFPPortXCVSlotslot number of portro Integer32 .1.3.6.1.4.1.3652.3.3.2.10.1.2 |
convSSLXFPPortXCVPortport numberro Integer32 .1.3.6.1.4.1.3652.3.3.2.10.1.3 |
convSSLXFPPortXCVChannelSpacingXCV channel spacingro Integer32 .1.3.6.1.4.1.3652.3.3.2.10.1.4 |
convSSLXFPPortXCVNumberOfChannelsXCV supported number channelsro Integer32 .1.3.6.1.4.1.3652.3.3.2.10.1.5 |
convSSLXFPPortXCVCenterWavlengthXCV center wavelengthro Integer32 .1.3.6.1.4.1.3652.3.3.2.10.1.6 |
convSSLXFPPortXCVTunableFeatureis transceiver tunable?ro Enumeration .1.3.6.1.4.1.3652.3.3.2.10.1.7 |
convSSLXFPPortXCVTunableMinMaxChannelSet parameter for transceiver channel config.ro DisplayString .1.3.6.1.4.1.3652.3.3.2.10.1.8 |
convSSLXFPPortXCVTunableWavelengthConfigXCV wavelength control. Min value is 1528000 and max value is 1564000. Wavelength value in units of picometer!rw Integer32 .1.3.6.1.4.1.3652.3.3.2.10.1.9 |
convSSLXFPPortXCVTunableChannelConfigSet parameter for transceiver channel config. Allowed channels are from C1..H61. 'C' represents the 100GHz channel and 'H' is 50 GHz above the corresponding 100GHz channel.rw DisplayString .1.3.6.1.4.1.3652.3.3.2.10.1.10 |
convSSLXFPPortXCVTunableConfigSelectionselects which config should be used (internal XCV or transponder card config)rw Enumeration .1.3.6.1.4.1.3652.3.3.2.10.1.11 |
More MIBs from Pan Dacom Direkt GmbH
Browse all Pan Dacom Direkt GmbHMIBs →SPEEDCARRIER-MIB
The SPEEDCARRIER-MIB provides SNMP management access to Speed Carrier hardware and its associated management cards, exposing operational status, interface statistics, and device health metrics for telecommunications carrier equipment.
413 objects→
SPEED-MUX-200G-MIB
The SPEED-MUX-200G-MIB provides SNMP-based management and monitoring capabilities for Speed-Mux 200G optical transport equipment, exposing performance counters, interface status, and error statistics specific to 200Gbps multiplexing operations.
232 objects→
SPEED-AMP-MIB
The SPEED-AMP-MIB provides SNMP management objects for monitoring and configuring SPEED-Amplifier hardware appliances, specifically exposing performance metrics such as throughput rates, session statistics, and amplifier operational states. This module enables network administrators to track real-time data flow capacity and device health within high-speed amplification networks.
150 objects→
SPEED-DUALLINE-FC
The SPEED-DUALLINE-FC MIB provides management objects for monitoring and configuring SPEED-Dualline Fibre Channel expansion cards, specifically supporting XFP and SFP form factors operating at 1G, 10G, and 16G speeds. It enables the retrieval of interface status, optical transceiver parameters, and error counters for these specific high-speed storage area network (SAN) adapters.
125 objects→
SPEED-MULTILINE-MIB
The SPEED-MULTILINE-MIB provides SNMP management objects for monitoring the operational status, port statistics, and interface states of SPEED Multiline family hardware cards. It enables administrators to track specific performance metrics such as line utilization, error counters, and card health indicators for these specialized telecommunications interface modules.
90 objects→
PanDacom-MIB
Standard SNMP MIB module defining data structures for PanDacom-MIB.
7 objects→