SNMP-VACM-AAA-MIB
The SNMP-VACM-AAA-MIB defines the management objects and local datastore structures required to enforce View-based Access Control (VACM) policies integrated with Authentication, Authorization, and Accounting (AAA) services within SNMP agents. It enables the monitoring of AAA-enabled access control rules, user view mappings, and authentication state data to ensure granular, policy-compliant SNMP access management.
Imported Objects
Objects
13 total| Object Name |
|---|
vacmAaaMIBThe management and local datastore information definitions for the AAA-Enabled View-based Access Control Model for SNMP. Copyright (c) 2010 IETF Trust and the persons identified as the document authors. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info). This version of this MIB module is part of RFC 6065; see the RFC itself for full legal notices. MODULE-IDENTITY .1.3.6.1.2.1.199 |
vacmAaaMIBObjects OBJECT IDENTIFIER .1.3.6.1.2.1.199.1 |
vacmAaaSecurityToGroupTableThis table provides a listing of all currently active sessions for which a mapping of the combination of SnmpSecurityModel and securityName into the name of a VACM group has been provided by an AAA service. The group name (in VACM) in turn identifies an access control policy to be used for the corresponding principals. SEQUENCE OF VacmAaaSecurityToGroupEntry .1.3.6.1.2.1.199.1.1 |
vacmAaaSecurityToGroupEntryAn entry in this table maps the combination of a SnmpSecurityModel and securityName into the name of a VACM group defining the access control policy that is to govern a particular session. Each entry corresponds to a session. Entries do not persist across reboots. An entry is created whenever an indication occurs that a new session has been established that would not have the same index values as an existing entry. When a session is torn down, disconnected, timed out (e.g., following the RADIUS Session-Timeout Attribute), or otherwise terminated for any reason, the corresponding vacmAaaSecurityToGroupEntry is deleted. VacmAaaSecurityToGroupEntry .1.3.6.1.2.1.199.1.1.1 |
vacmAaaSecurityModelThe security model associated with the AAA binding represented by this entry. This object cannot take the 'any' (0) value. SnmpSecurityModel .1.3.6.1.2.1.199.1.1.1.1 |
vacmAaaSecurityNameThe securityName of the principal associated with the AAA binding represented by this entry. In RADIUS environments, this corresponds to the User-Name Attribute. SnmpAdminString .1.3.6.1.2.1.199.1.1.1.2 |
vacmAaaSessionIDAn implementation-dependent identifier of the session. This value MUST be unique among all currently open sessions of all of this SNMP engine's transport models. The value has no particular significance other than to distinguish sessions. Implementations in which tmSessionID has a compatible syntax and is unique across all transport models MAY use that value. Unsigned32 .1.3.6.1.2.1.199.1.1.1.3 |
vacmAaaGroupNameThe name of the group to which this entry is to belong. In RADIUS environments, this comes from the RADIUS Management-Policy-Id Attribute. When the appropriate conditions are met, the value of this object is applied the vacmGroupName in the corresponding vacmSecurityToGroupEntry.ro SnmpAdminString .1.3.6.1.2.1.199.1.1.1.4 |
vacmAaaMIBConformance OBJECT IDENTIFIER .1.3.6.1.2.1.199.2 |
vacmAaaMIBCompliances OBJECT IDENTIFIER .1.3.6.1.2.1.199.2.1 |
vacmAaaMIBBasicComplianceThe compliance statement for SNMP engines implementing the AAA-Enabled View-based Access Control Model for SNMP. Unknown .1.3.6.1.2.1.199.2.1.1 |
vacmAaaMIBGroups OBJECT IDENTIFIER .1.3.6.1.2.1.199.2.2 |
vacmAaaGroupA collection of objects for supporting the use of AAA services to provide user-to-group mappings for VACM. Unknown .1.3.6.1.2.1.199.2.2.1 |
More MIBs from Default
Browse all DefaultMIBs →SNMP MIB module
The AVAYA-WLAN-MIB provides SNMP-based management and monitoring capabilities for Avaya wireless LAN infrastructure, enabling the collection of performance metrics such as access point status, client association counts, signal strength, and radio interface statistics. This module facilitates the tracking of WLAN-specific events and configuration parameters to support network availability and troubleshooting within Avaya wireless deployments.
The VMWARE-NSX-MIB enables SNMP-based monitoring and management of VMware NSX-T Data Center virtual network infrastructure, exposing metrics for logical switches, routers, distributed firewalls, and overlay tunnel states. It facilitates the tracking of Layer 2 through Layer 7 service instances, including access control lists, Quality of Service policies, and virtual network topology changes within the software-defined networking environment.
Standard SNMP MIB module defining data structures for 923switch.m.
Standard SNMP MIB module defining data structures for CTATX-MIB.
SNMP MIB module