SNMP-USM-HMAC-SHA2-MIB
The SNMP-USM-HMAC-SHA2-MIB defines the Object Identities required to configure and monitor HMAC-SHA2 authentication parameters within the SNMP User-based Security Model (USM). This module enables network management systems to enforce cryptographic integrity and authenticity for SNMPv3 user sessions, specifically managing authentication key types and associated security levels.
Imported Objects
Objects
5 total| Object Name |
|---|
snmpUsmHmacSha2MIBDefinitions of Object Identities needed for the use of HMAC-SHA2 Authentication Protocols by SNMP's User-based Security Model. Copyright (c) 2016 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info). MODULE-IDENTITY .1.3.6.1.2.1.235 |
usmHMAC128SHA224AuthProtocolThe Authentication Protocol usmHMAC128SHA224AuthProtocol uses HMAC-SHA-224 and truncates output to 128 bits. OBJECT IDENTIFIER .1.3.6.1.6.3.10.1.1.4 |
usmHMAC192SHA256AuthProtocolThe Authentication Protocol usmHMAC192SHA256AuthProtocol uses HMAC-SHA-256 and truncates output to 192 bits. OBJECT IDENTIFIER .1.3.6.1.6.3.10.1.1.5 |
usmHMAC256SHA384AuthProtocolThe Authentication Protocol usmHMAC256SHA384AuthProtocol uses HMAC-SHA-384 and truncates output to 256 bits. OBJECT IDENTIFIER .1.3.6.1.6.3.10.1.1.6 |
usmHMAC384SHA512AuthProtocolThe Authentication Protocol usmHMAC384SHA512AuthProtocol uses HMAC-SHA-512 and truncates output to 384 bits. OBJECT IDENTIFIER .1.3.6.1.6.3.10.1.1.7 |
More MIBs from Default
Browse all DefaultMIBs →SNMP MIB module
The AVAYA-WLAN-MIB provides SNMP-based management and monitoring capabilities for Avaya wireless LAN infrastructure, enabling the collection of performance metrics such as access point status, client association counts, signal strength, and radio interface statistics. This module facilitates the tracking of WLAN-specific events and configuration parameters to support network availability and troubleshooting within Avaya wireless deployments.
The VMWARE-NSX-MIB enables SNMP-based monitoring and management of VMware NSX-T Data Center virtual network infrastructure, exposing metrics for logical switches, routers, distributed firewalls, and overlay tunnel states. It facilitates the tracking of Layer 2 through Layer 7 service instances, including access control lists, Quality of Service policies, and virtual network topology changes within the software-defined networking environment.
Standard SNMP MIB module defining data structures for 923switch.m.
Standard SNMP MIB module defining data structures for CTATX-MIB.
SNMP MIB module