SNMP-UPS-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
75
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
75 total| Object Name |
|---|
mgmt OBJECT IDENTIFIER .1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.2.2 |
RFC1155-SMI Unknown .1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.2.2 |
mib-2 OBJECT IDENTIFIER .1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.2.2.1 |
directory OBJECT IDENTIFIER .1.3.6.1.1 |
experimental OBJECT IDENTIFIER .1.3.6.1.3 |
univPowerSupply OBJECT IDENTIFIER .1.3.6.1.3.9999 |
ident OBJECT IDENTIFIER .1.3.6.1.3.9999.1 |
identDescrThe UPS description. This should include the
vendor name, model number and software revision.ro OCTET STRING .1.3.6.1.3.9999.1.1 |
identSpecificA reference to MIB definitions
specific to the particular UPS being
managed. If this information is not
present, its value should be set to
the OBJECT IDENTIFIER { 0 0 }, which
is a syntactically valid object
identifier, and any conformant
implementation of ASN.1 and BER must
be able to generate and recognize this
value.ro OBJECT IDENTIFIER .1.3.6.1.3.9999.1.2 |
battery OBJECT IDENTIFIER .1.3.6.1.3.9999.2 |
batTimeRemainingThe estimated time to battery charge
depletion. (Unit of measure: Minute)ro INTEGER .1.3.6.1.3.9999.2.1 |
batTemperatureThe battery temperature. (Unit of
measure: Degree, Centigrade)ro INTEGER (-32768..32767) .1.3.6.1.3.9999.2.2 |
batVoltageThe current battery voltage. (Unit of
measure: volt)ro INTEGER (-32768..32767) .1.3.6.1.3.9999.2.3 |
batChargeCurrentThe current battery charging current.
(Unit of measure: Amp/10)ro INTEGER (-32768..32767) .1.3.6.1.3.9999.2.4 |
batDischargeCurrentThe current battery discharging current.
(Unit of measure: Amp/10)ro INTEGER (-32768..32767) .1.3.6.1.3.9999.2.5 |
batCapacityThe current battery capacity in percentage
of total available.ro INTEGER .1.3.6.1.3.9999.2.6 |
input OBJECT IDENTIFIER .1.3.6.1.3.9999.3 |
inputFrequencyThe current input frequency. (Unit of
measure: mHz)ro INTEGER (-2147483647..2147483647) .1.3.6.1.3.9999.3.1 |
inputBrownOutsThe number of brown-out conditions since the
agent started.ro Counter .1.3.6.1.3.9999.3.2 |
inputBlackOutsThe number of black-out conditions since the
agent started.ro Counter .1.3.6.1.3.9999.3.3 |
inputTransientsThe number of transient (sag and surge)
conditions since the agent started.ro Counter .1.3.6.1.3.9999.3.4 |
inputNumPhasesThe number of input phases utilized in this
device. This entry indicates the number of rows
in the input table.ro Enumeration .1.3.6.1.3.9999.3.5 |
inputTable SEQUENCE OF InputEntry .1.3.6.1.3.9999.3.6 |
inputEntry InputEntry .1.3.6.1.3.9999.3.6.1 |
inputPhaseThe input phase.ro INTEGER .1.3.6.1.3.9999.3.6.1.1 |
inputVoltageThe input voltage. (Unit of measure: Volt)ro INTEGER (-32768..32767) .1.3.6.1.3.9999.3.6.1.2 |
inputCurrentThe input current. (Unit of measure: Amp/10)ro INTEGER (-32768..32767) .1.3.6.1.3.9999.3.6.1.3 |
inputVAThe input volt-amps.ro INTEGER (-32768..32767) .1.3.6.1.3.9999.3.6.1.4 |
inputWattsThe input power. (Unit of measure: Watt)ro INTEGER (-32768..32767) .1.3.6.1.3.9999.3.6.1.5 |
output OBJECT IDENTIFIER .1.3.6.1.3.9999.4 |
outputFrequencyMeasured in mHz.ro INTEGER (-2147483647..2147483647) .1.3.6.1.3.9999.4.1 |
outputInverterTempThe temperature of the inverter. (Unit of
measure: degree, Centigrade)ro INTEGER (-32768..32767) .1.3.6.1.3.9999.4.2 |
outputControllerTempThe temperature of the controller. (Unit of
measure: degree, Centigrade)ro INTEGER (-32768..32767) .1.3.6.1.3.9999.4.3 |
outputNumPhasesThe number of output phases utilized in this
device. This entry indicates the number of rows in
the output table.ro Enumeration .1.3.6.1.3.9999.4.4 |
outputTable SEQUENCE OF OutputEntry .1.3.6.1.3.9999.4.5 |
outputEntry OutputEntry .1.3.6.1.3.9999.4.5.1 |
outputPhaseThe output phase.ro INTEGER .1.3.6.1.3.9999.4.5.1.1 |
outputVoltageThe output voltage. (Unit of measure: Volt)ro INTEGER (-2147483647..2147483647) .1.3.6.1.3.9999.4.5.1.2 |
outputCurrentThe output current. (Unit of measure: Amp/10)ro INTEGER (-2147483647..2147483647) .1.3.6.1.3.9999.4.5.1.3 |
outputVAThe output volt-amps.ro INTEGER (-32768..32767) .1.3.6.1.3.9999.4.5.1.4 |
outputWattsThe output power. (Unit of measure: Watt)ro INTEGER (-32768..32767) .1.3.6.1.3.9999.4.5.1.5 |
bypass OBJECT IDENTIFIER .1.3.6.1.3.9999.5 |
bypassFrequencyThe bypass frequency. (Unit of measure: mHz)ro INTEGER (-2147483647..2147483647) .1.3.6.1.3.9999.5.1 |
bypassNumPhasesThe number of bypass phases utilized in this
device. This entry indicates the number of rows in
the input table.ro Enumeration .1.3.6.1.3.9999.5.2 |
bypassTable SEQUENCE OF BypassEntry .1.3.6.1.3.9999.5.3 |
bypassEntry BypassEntry .1.3.6.1.3.9999.5.3.1 |
bypassPhaseThe bypass phase.ro INTEGER .1.3.6.1.3.9999.5.3.1.1 |
bypassVoltageThe bypass voltage. (Unit of measure: Volt)ro INTEGER (-32768..32767) .1.3.6.1.3.9999.5.3.1.2 |
bypassCurrentThe bypass current. (Unit of measure: Amp/10)ro INTEGER (-32768..32767) .1.3.6.1.3.9999.5.3.1.3 |
status OBJECT IDENTIFIER .1.3.6.1.3.9999.6 |
statSummaryA summary of non-critical conditions. Each of the
enumerated values are added to compute the value
of this object.ro Enumeration .1.3.6.1.3.9999.6.1 |
alarm OBJECT IDENTIFIER .1.3.6.1.3.9999.7 |
alarmSummaryA summary of critical conditions. Each of the
enumerated values are added to compute the value
of this object.ro Enumeration .1.3.6.1.3.9999.7.1 |
test OBJECT IDENTIFIER .1.3.6.1.3.9999.8 |
testBatterySetting this variable to 'start' will initiate
the battery test. Setting this variable to 'abort'
will stop the battery test if the test is in-
progress, otherwise it has no effect. Reading this
variable will return zero. If 'testBatteryStatus'
is remain in the failure state.rw Enumeration .1.3.6.1.3.9999.8.1 |
testBatteryStatusThe status of the battery test.ro Enumeration .1.3.6.1.3.9999.8.2 |
testDiagSetting this variable to 'start' will initiate
the diagnostics test. Setting this variable to
'abort' will stop the diagnostics test if the test
is in-progress, otherwise it has no effect.
Reading this variable will return zero.rw Enumeration .1.3.6.1.3.9999.8.3 |
testDiagStatusThe status of the diagnostics test.ro Enumeration .1.3.6.1.3.9999.8.4 |
testIndicatorsSetting this variable to 'start' will initiate
the indicators test. Setting this variable to
'abort' will stop the indicators test if the test
is in-progress, otherwise it has no effect.
Reading this variable will return zero.rw Enumeration .1.3.6.1.3.9999.8.5 |
testIndicatorsStatusThe status of the indicators test. Note: this
test requires
physical verification to be useful.ro Enumeration .1.3.6.1.3.9999.8.6 |
schedule OBJECT IDENTIFIER .1.3.6.1.3.9999.9 |
schedOutputOffDelaySetting this object will stop the output after
the indicated number of TimeTicks. Setting this
object to -1 will abort any shutdown sequence. The
output will restart in the number of TimeTicks
indicated by 'schedOutputOnDelay' unless it is
equal to -1. In the later case, the output will
remain inactive. This object will be set to -1
when the device is initialized on power-up or
restart.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.3.9999.9.1 |
schedOutputOnDelayThe length of time to delay before coming on-
line. If this value is -1 the output will remain
off. This object will be set to -1 when the
device is initialized on power-up or restart.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.3.9999.9.2 |
schedSystemShutdownSetting this object to 'true' will shutdown the
device.rw Enumeration .1.3.6.1.3.9999.9.3 |
schedUnixShutdownSetting this device to 'true' will cause unix
shutdown traps to be issued at a system-dependent
rate, or until this object is set to false.rw Enumeration .1.3.6.1.3.9999.9.4 |
config OBJECT IDENTIFIER .1.3.6.1.3.9999.10 |
configOutputVoltageThe nominal output voltage. (Unit of measure:
volt)ro INTEGER (-32768..32767) .1.3.6.1.3.9999.10.1 |
configInputVoltageThe nominal input voltage. (Unit of measure:
volt)ro INTEGER (-32768..32767) .1.3.6.1.3.9999.10.2 |
configOutputFreqThe nominal output frequency. (Unit of measure:
mHz)ro INTEGER (-2147483647..2147483647) .1.3.6.1.3.9999.10.3 |
configInputFreqThe nominal input frequency. (Unit of measure:
mHz)ro INTEGER (-2147483647..2147483647) .1.3.6.1.3.9999.10.4 |
configNominalBatTimeThe nominal battery time. (Unit of measure:
minute)ro INTEGER (-32768..32767) .1.3.6.1.3.9999.10.5 |
configAudioStatusThe status of the audio alarm. 'Off' indicates
the alarm will not sound, while the 'squelch'
value indicates the alarm has sounded and
squelched. A squelched audio status will return to
the previous state ('on' or 'off') when the alarm
stops sounding.rw Enumeration .1.3.6.1.3.9999.10.6 |
configAutoRestartSetting this object to 'on' will cause the device
to restart after a shutdown.rw Enumeration .1.3.6.1.3.9999.10.7 |
private OBJECT IDENTIFIER .1.3.6.1.4 |
enterprises OBJECT IDENTIFIER .1.3.6.1.4.1 |
More MIBs from Default
Browse all DefaultMIBs →RC-TLS-MIB
SNMP MIB module
2614 objects→
AVAYA-WLAN-MIB
The AVAYA-WLAN-MIB provides SNMP-based management and monitoring capabilities for Avaya wireless LAN infrastructure, enabling the collection of performance metrics such as access point status, client association counts, signal strength, and radio interface statistics. This module facilitates the tracking of WLAN-specific events and configuration parameters to support network availability and troubleshooting within Avaya wireless deployments.
2022 objects→
VMWARE-NSX-MIB
The VMWARE-NSX-MIB enables SNMP-based monitoring and management of VMware NSX-T Data Center virtual network infrastructure, exposing metrics for logical switches, routers, distributed firewalls, and overlay tunnel states. It facilitates the tracking of Layer 2 through Layer 7 service instances, including access control lists, Quality of Service policies, and virtual network topology changes within the software-defined networking environment.
1035 objects→
923switch.m
Standard SNMP MIB module defining data structures for 923switch.m.
999 objects→
CTATX-MIB
Standard SNMP MIB module defining data structures for CTATX-MIB.
747 objects→
DC-BGP-MIB
SNMP MIB module
652 objects→