SNMP-SSH-TM-MIB
The SNMP-SSH-TM-MIB defines the management information base for the Secure Shell Transport Model, enabling Network Management Systems to monitor and control SNMP over SSH transport connections. It exposes metrics specifically related to SSH session establishment, authentication states, and transport layer security parameters rather than device-specific operational data.
Imported Objects
Objects
16 total| Object Name |
|---|
snmpSSHDomainThe SNMP over SSH transport domain. The corresponding transport address is of type SnmpSSHAddress. When an SNMP entity uses the snmpSSHDomain transport model, it must be capable of accepting messages up to and including 8192 octets in size. Implementation of larger values is encouraged whenever possible. OBJECT IDENTIFIER .1.3.6.1.6.1.1 |
sshtmMIBThe Secure Shell Transport Model MIB Copyright (C) The Internet Society (2007). This version of this MIB module is part of RFC XXXX; see the RFC itself for full legal notices. -- NOTE to RFC editor: replace XXXX with actual RFC number -- for this document and remove this note MODULE-IDENTITY .1.3.6.1.6.3.1 |
sshtmNotifications OBJECT IDENTIFIER .1.3.6.1.6.3.1.0 |
sshtmObjects OBJECT IDENTIFIER .1.3.6.1.6.3.1.1 |
sshtmSession OBJECT IDENTIFIER .1.3.6.1.6.3.1.1.1 |
sshtmSessionCurrentThe current number of open sessions.ro Gauge32 .1.3.6.1.6.3.1.1.1.1 |
sshtmSessionMaxSupportedThe maximum number of open sessions supported. The value zero indicates the maximum is dynamic.ro Unsigned32 .1.3.6.1.6.3.1.1.1.2 |
sshtmSessionOpenErrorsThe number of times an openSession() request failed to open a Session.ro Counter32 .1.3.6.1.6.3.1.1.1.3 |
sshtmSessionUserAuthFailuresThe number of times an openSession() request failed due to user authentication failures.ro Counter32 .1.3.6.1.6.3.1.1.1.4 |
sshtmSessionChannelOpenFailuresThe number of times an openSession() request failed due to channel open failures.ro Counter32 .1.3.6.1.6.3.1.1.1.5 |
sshtmSessionNoAvailableSessionsThe number of times a Response message was dropped because the corresponding session was no longer available.ro Counter32 .1.3.6.1.6.3.1.1.1.6 |
sshtmConformance OBJECT IDENTIFIER .1.3.6.1.6.3.1.2 |
sshtmGroups OBJECT IDENTIFIER .1.3.6.1.6.3.1.2.1 |
sshtmGroupA collection of objects for maintaining information of an SNMP engine which implements the SNMP Secure Shell Transport Model. Unknown .1.3.6.1.6.3.1.2.1.2 |
sshtmCompliances OBJECT IDENTIFIER .1.3.6.1.6.3.1.2.2 |
sshtmComplianceThe compliance statement for SNMP engines that support the SNMP-SSH-TM-MIB Unknown .1.3.6.1.6.3.1.2.2.1 |
More MIBs from Default
Browse all DefaultMIBs →SNMP MIB module
The AVAYA-WLAN-MIB provides SNMP-based management and monitoring capabilities for Avaya wireless LAN infrastructure, enabling the collection of performance metrics such as access point status, client association counts, signal strength, and radio interface statistics. This module facilitates the tracking of WLAN-specific events and configuration parameters to support network availability and troubleshooting within Avaya wireless deployments.
The VMWARE-NSX-MIB enables SNMP-based monitoring and management of VMware NSX-T Data Center virtual network infrastructure, exposing metrics for logical switches, routers, distributed firewalls, and overlay tunnel states. It facilitates the tracking of Layer 2 through Layer 7 service instances, including access control lists, Quality of Service policies, and virtual network topology changes within the software-defined networking environment.
Standard SNMP MIB module defining data structures for 923switch.m.
Standard SNMP MIB module defining data structures for CTATX-MIB.
SNMP MIB module