Home/Catalog/SNI-SERVER-CONTROL-MIB

SNI-SERVER-CONTROL-MIB

Detailed view of the defined objects, syntax rules, and hierarchical paths.

412
Objects
Active
Status
3
Dependencies

Imported Objects

RFC-1212
RFC1213-MIB
RFC1155-SMI

Objects

412 total
Object Name
enterprises
OBJECT IDENTIFIER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1
IMPORTS
Unknown
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1
sni
OBJECT IDENTIFIER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231
sniProductMibs
OBJECT IDENTIFIER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2
sniExtensions
OBJECT IDENTIFIER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10
sniServerMgmt
OBJECT IDENTIFIER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2
testTrapTest trap to verify trap connection.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.600
fanErrorThe indicated fan failed.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.601
tempOkThe temperature of the indicated sensor has decreased to the normal level.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.602
tempWarnThe temperature of the indicated sensor has reached the warning level.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.603
tempCriticalThe temperature of the indicated sensor is out of tolerance range. The system will shut down and power off if shutdown is enabled.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.604
trapOnBatteryThe UPS is operating on battery power or the power supply is drawing current from the backup battery unit (BBU). This status is persistent and is resent at one minute intervals until the mains returns or the system is switched off.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.606
trapOnMainsThe mains voltage returned after a power failure.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.607
selftestWarningCurrently the only possible warning is: SCB battery (nearly) empty.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.608
selftestErrorThe Server Management controller failed.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.609
svCommunicationFailureCommunication with the Server Management controller lost.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.610
scbUnconfiguredUPSDetectedA UPS has been detected, but no UPS is configured. This trap will be repeated every 60 minutes until the condition is removed.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.611
scbUPSNotdetectedA UPS is configured, but no UPS has been detected. This trap will be repeated every 60 minutes until the condition is removed.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.612
scbUnconfiguredBBUDetectedA BBU has been detected, but no BBU is configured. This trap will be repeated every 60 minutes until the condition is removed.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.613
scbBBUNotdetectedA BBU is configured, but no BBU has been detected. This trap will be repeated every 60 minutes until the condition is removed.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.614
notEnoughCabinetsOne or more storage extensions missing.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.615
tooManyCabinetsThe actual number of storage extensions is higher than the configured number.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.616
cabinetSwitchedOffThe cabinet has been switched off.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.617
cabinetSwitchedOnThe cabinet has been switched on.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.618
internalErrorThe agent has detected an internal error.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.620
serverShutdownThe server is being shut down.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.621
fanCriticalErrorThe indicated fan became critical.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.622
cabinetNotConfiguredThe agent has detected a mismatch in the configuration of the server.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.623
powerSupplyRemovedOne hot-replace power supply was removed.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.624
powerSupplyAddedOne hot-replace power supply was added.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.625
powerSupplyFailedOne hot-replace power supply failed.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.626
powerSupplyOkPower supply is working again.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.627
powerSupplyStatusCriticalPower supply status has become critical.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.628
fanOkThe indicated fan is OK again.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.629
tempSensorBrokenThe indicated temperature sensor is broken.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.630
serverManagementDisabledThe server management BIOS is disabled.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.631
trapAcFailMains failed in the specified cabinet. This can only happen in storage extension cabinets without UPS or BBU. A server will not have time to send this event.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.632
trapDuplicateCabinetIdTwo ore more cabinets (server or storage extension) have the same ID number. The system will not run properly.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.633
trapEventLogAn error message was written into the systemboard's event/error log. This could have happened when an error occured before the agent was running or any error without a specific event message. See server management event/error log for detailed error description.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.634
tempSensorOkThe indicated broken temperature sensor is OK again.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.635
svCommunicationEstablishedCommunication with the Server Management controller established again.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.636
correctableMemErrorAddrA correctable memory error at specified address was detected.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.637
uncorrectableMemErrorAddrAn uncorrectable memory error at specified address was detected.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.638
correctableMemErrorBankA correctable memory error at specified bank was detected.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.639
uncorrectableMemErrorBankAn uncorrectable memory error at specified bank was detected.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.640
correctableMemErrorModuleA correctable memory error at specified module was detected.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.641
uncorrectableMemErrorModuleAn uncorrectable memory error at specified module was detected.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.642
correctableMemErrorA correctable memory error at unknown address was detected.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.643
uncorrectableMemErrorAn uncorrectable memory error at unknown address was detected.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.644
powerOffTimeReachedThe power-off time is reached! System will shutdown in after delay.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.645
frontDoorStatusChangedThe front door status has changed.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.646
housingOpenStatusChangedThe housing open status has changed
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.647
sniScRedundantFanFailedThe indicated redundant fan failed.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.648
sniScRedundantPowerSupplyFailedOne redundant hot-replace power supply failed.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.649
sniScVoltageOkPower supply voltage is within normal range again.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.650
sniScVoltageTooLowPower supply voltage is too low.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.651
sniScVoltageTooHighPower supply voltage is too high.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.652
sniScFanAddedThe indicated hot-plug fan was inserted.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.653
sniScFanRemovedThe indicated hot-plug fan was removed.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.654
sniScShutdownCancelledThis event will be sent if a pending server shutdown has been cancelled by the user.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.655
sniScCpuSpeedChangedThe CPU clock frequency has been reduced because of a temperature problem.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.656
sieScPowerOnThe server has been powered on.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.657
sieScNoBootCpuThe system boot failed because no valid boot CPU has been found.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.658
sieScPostErrorThis trap will be sent when the system boot fails, because the power on selftest (POST) has reported an error.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.659
sieScSetupEnteredThis trap will be sent when the bios setup has been entered.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.660
sieScBootErrorThis trap will be sent when no bootable operating system can be found.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.661
sieScBootWatchdogExpiredThis trap will be sent when the boot watchdog expires.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.662
sieScSoftwareWatchdogExpiredThis trap will be sent when the software watchdog expires.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.663
sieScUserAuthenticationFailureThis trap will be sent when an user authentication failure is detected via PPP, FTP, HTTP or telnet fails.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.664
sieScDiagnosticBootThis trap will be sent when a server is reset and diagnostic boot is enabled. The value in trapString specifies the primary channel i.e. the server name (from which the primary IP address may be derived).
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.665
sieScBootRetryCountZeroThis trap will be sent when a boot retry counter gets zero on power up
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.666
sieScMessageLogFullThe System Event Log is full. No more messages can be logged. This trap will not occur on wrap-around log types.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.667
memErrorModulePrefailureA memory module is predicted to fail (prefailure).
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.668
memErrorModuleFailingA memory module is failing.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.669
memErrorModuleReplacedA memory module had failed and was replaced by a hot-spare module.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.670
sniScPowerSupplyRedundancyLostPower supply redundancy no longer available.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.671
sieScMessageLogWarningThe warning threshold for the number of System Event Log entries has been exceeded.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.672
sieScCpuPrefailureA CPU is predicted to fail (prefailure).
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.673
sieScPowerFailDC power failed in the specified cabinet. This is the result of the system's power-good sensor monitoring. The system may stop when this condition occurs.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.674
sieScBiosSelftestErrorA critical error happend while BIOS selftest. This error needs to be acknowledged to clear the error condition.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.675
sieScBiosSelftestWatchdogExpiredThis trap will be sent when the BIOS selftest watchdog expires. This watchdog expires when the BIOS selftest cannot be finished in a certain time period.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.676
sniScVoltageFailurePower supply voltage is out of range.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.677
sniScBatteryVoltagePrefailureBattery is predicted to fail.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.678
sieScSevereSystemErrorThe system was restarted after a severe problem. See server management message log (recovery log) for detailed information.
TRAP-TYPE
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.0.679
sniInventory
OBJECT IDENTIFIER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.1
sniCommon
OBJECT IDENTIFIER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2
sniBios
OBJECT IDENTIFIER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.1
sniEisa
OBJECT IDENTIFIER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.2
sniHd
OBJECT IDENTIFIER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.3
sniBus
OBJECT IDENTIFIER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.4
sniServerControl
OBJECT IDENTIFIER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5
agentInfo
OBJECT IDENTIFIER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.1
agentIdAgent identification stringro
DisplayString (SNMPv2-TC)
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.1.1
agentCompanyAgent's company namero
DisplayString (SNMPv2-TC)
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.1.2
agentVersionStringAgent's version string <Major>.<Minor> (i.e. 1.05)ro
DisplayString (SNMPv2-TC)
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.1.3
agentBuildCompilation time and date of agent programro
DisplayString (SNMPv2-TC)
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.1.4
agentVersionMajorAgent's major version (numerical)ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.1.5
agentVersionMinorAgent's minor version (numerical)ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.1.6
agentWriteAllowedDefines whether writable objects can be written (except shutdown/power-off operations)ro
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.1.7
agentShutdownAllowedDefines whether shutdown/power-off objects can be writtenro
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.1.8
environment
OBJECT IDENTIFIER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.2
temperatureSensorsTableTable with data of all configured temperature sensors
SEQUENCE OF TemperatureSensors
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.2.1
temperatureSensors
TemperatureSensors
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.2.1.1
tempCabinetIdID of the cabinet the temperature sensor is in (index, 0 based)ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.2.1.1.1
tempSensorNumberNumber of the sensor in this cabinet (index, 0 based)ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.2.1.1.2
tempSensorStatusStatus of this temperature sensor (OK, critical or shutdown temperature reached...). The cold and the damage temperature status levels are no longer supported (values 6, 8, 9, 10). Status not-available(99) can be a sensor of a cpu that is not installed. Status sensor-disabled(2) is currently not used.ro
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.2.1.1.3
tempSensorPurposePurpose of this temperature sensor (CPU, ambient, housing...). Purposes disable(2) and not-available(6) are no longer used.ro
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.2.1.1.4
tempLowerWarningLevelObject made obsolete - no longer supportedroobsolete
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.2.1.1.5
tempUpperWarningLevelSystem sends a temperature warning when temperature rises ABOVE this level (degrees Celsius)ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.2.1.1.6
tempLowerCriticalLevelObject made obsolete - no longer supportedroobsolete
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.2.1.1.7
tempUpperCriticalLevelSystem becomes critical when temperature rises ABOVE this level (degrees Celsius). A system shutdown is performed if object tempCriticalReaction is set to shutdown-and-poweroff.ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.2.1.1.8
tempLowerDamageLevelObject made obsolete - no longer supportedroobsolete
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.2.1.1.9
tempUpperDamageLevelObject made obsolete - no longer supportedroobsolete
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.2.1.1.10
tempCurrentValueCurrent temperature value (degrees Celsius; -1: unknown temperature, problem with sensor, see tempSensorStatus)ro
Gauge
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.2.1.1.11
tempCriticalReactionReaction when a temperature gets critical (shutdown and power-off, continue...). The value unknown(1) cannot be set, a SET will deliver 'badValue'.rw
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.2.1.1.12
tempSensorDesignationString describing the purpose of each temperature sensor in a housing (e.g. CPU, ambient,...). This object will substitute the tempSensorPurpose object.ro
DisplayString (SNMPv2-TC)
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.2.1.1.13
fansTableTable with data of all configured cooling devices (fans)
SEQUENCE OF Fans
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.2.2
fans
Fans
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.2.2.1
fanCabinetIdID of the cabinet the cooling device (fan) is in (index, 0 based)ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.2.2.1.1
fanNumberNumber of the fan in this cabinet (index, 0 based)ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.2.2.1.2
fanStatusStatus of this fan (OK, failed...). Status disabled(2) is no longer used. Status prefailure-predicted(5) means the fan will fail in near future. Status redundant-fan-failed(6) means a redundant fan has failed, the system is not yet critical. Status not-manageable(7) is a fan that is available but has no management facilities. Status not-present(8) can be a hot-plug fan that is currently removed.ro
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.2.2.1.3
fanPurposePurpose of this fan (housing, component, CPU on-chip, power supply...). Purpose disabled(2) is currently not used.ro
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.2.2.1.4
fanPositionXFax X position - obsolete; for fan indentifying use fanIdentification objectroobsolete
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.2.2.1.5
fanPositionYFax Y position - obsolete; for fan indentifying use fanIdentification objectroobsolete
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.2.2.1.6
fanPositionZFax Z position - obsolete; for fan indentifying use fanIdentification objectroobsolete
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.2.2.1.7
fanCurrentSpeedCurrent speed of the fan (in revolutions per minute, -1 = unknown)ro
Gauge
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.2.2.1.8
fanNominalMaximumSpeedNominal speed of the fan (in revolutions per minute) on maximum power; the speed is measured the first time the agent is installed and than compared daily to the current speed on maximum power to detect a fan prefailure (-1 = unknown).ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.2.2.1.9
fanCurrentMaximumSpeedCurrent speed of the fan (in revolutions per minute) on maximum power (-1 = unknown).ro
Gauge
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.2.2.1.10
fanMaximumSpeedCriticalLevelObsolete - no longer supported.roobsolete
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.2.2.1.11
fanMinimumSpeedObsolete - no longer supported.roobsolete
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.2.2.1.12
fanFailReactionReaction when a fan has failed (shutdown and power-off, continue...). The value unknown(1) cannot be set, a SET will deliver 'badValue'.rw
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.2.2.1.14
fanFailShutdownDelayDelay time (in seconds) when shutdown should commit on fan fail (if shutdown-and-off is configured, 0 = immediately, -1 = unknown). The value unknown(-1) cannot be set, a SET will deliver 'badValue'.rw
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.2.2.1.15
fanDesignationString describing the purpose of each fan in a housing (e.g. CPU, Power Supply,...). This object will substitute the fanPurpose object.rw
DisplayString (SNMPv2-TC)
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.2.2.1.16
fanIdentificationString identifying each fan in a housing (e.g. CPU0, CPU1, PS0...)rw
DisplayString (SNMPv2-TC)
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.2.2.1.17
fanDailyTestTimeDaily time when to automatically test fan speeds (in minutes since midnight; -1 = unknown, automatic fan test not supported). The value unknown(-1) cannot be set, a SET will deliver 'badValue'.rw
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.2.3
fanStartTestStart test of all fans to get the speed at maximum power (this test is normally started automatically once a day). Reading this object just returns the value 0.rw
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.2.4
errorHandling
OBJECT IDENTIFIER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.3
eventLogTableTable with event log entries (can also contain critical errors when an ErrorLog for critical errors is not available)
SEQUENCE OF EventLog
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.3.1
eventLog
EventLog
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.3.1.1
eventLogEntryNumberEntry number in eventLogTable (index, 0 based)ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.3.1.1.1
eventLogMessageDataNon-critical message log entry as described abovero
OCTET STRING
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.3.1.1.2
eventLogMaxEntriesNumber of EventLog entries (can be used to directly get all table entries with one varbind list)ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.3.2
errorLogTableTable with major and critial error log entries (can be missing on some hardware platforms)
SEQUENCE OF ErrorLog
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.3.3
errorLog
ErrorLog
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.3.3.1
errorLogEntryNumberEntry number in critical errorLogTable (index, 0 based)ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.3.3.1.1
errorLogMessageDataMajor/critical message log entry as described abovero
OCTET STRING
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.3.3.1.2
errorLogMaxEntriesNumber of ErrorLog entries (can be used to directly get all table entries with one varbind list)ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.3.4
hardwareWatchdogStatusStatus of the hardware watchdog (periodically restarted by the server management BIOS). The hardware watchdog is only supported on SMI based management hardware, not for micro controller hardware.ro
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.3.5
hardwareWatchdogTimeTimeout time of the hardware watchdog (in seconds, -1 = unknown)roobsolete
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.3.6
hardwareWatchdogEnableEnable/disable the hardware watchdog. The value unknown(1) cannot be set, a SET will deliver 'badValue'.rw
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.3.7
softwareWatchdogStatusStatus of the software watchdog (periodically restarted by the server management agent)ro
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.3.8
softwareWatchdogTimeTimeout time of the software watchdog (in minutes, -1 = unknown). The value unknown(-1) cannot be set, a SET will deliver 'badValue'.rw
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.3.9
softwareWatchdogEnableEnable/disable the software watchdog. The value unknown(-1) cannot be set, a SET will deliver 'badValue'.rw
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.3.10
softwareWatchdogActionBehavior when the software watchdog timeout occurs (reboot, continue...). This value is only used if the watchdog is enabled. If set to continue and the watchdog has timeout, it will only be logged and no reset happens. The value unknown(1) cannot be set, a SET will deliver 'badValue'.rw
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.3.11
bootWatchdogStatusStatus of the boot watchdog (started at system boot, reset by the server management agent). If the SC agent is not started within the specified time, the management controller assumes the system did not boot correctly and executes system reboot.ro
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.3.12
bootWatchdogTimeTimeout time of the boot watchdog (in minutes, -1 = unknown). The value unknown(-1) cannot be set, a SET will deliver 'badValue'.rw
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.3.13
bootWatchdogEnableEnable/disable the boot watchdog. The value unknown(-1) cannot be set, a SET will deliver 'badValue'.rw
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.3.14
bootWatchdogActionBehavior when the boot watchdog timeout occurs (reboot, continue...). This value is only used if the watchdog is enabled. If set to continue and the watchdog has timeout, it will only be logged and no reset happens. The value unknown(1) cannot be set, a SET will deliver 'badValue'.rw
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.3.15
systemBoard
OBJECT IDENTIFIER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.4
cpuTableTable with CPU information
SEQUENCE OF Cpu
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.4.1
cpu
Cpu
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.4.1.1
cpuTableIndexNumber of the CPU in the CpuTable (index, 0 based)ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.4.1.1.1
cpuTypeType of the CPU (486, Pentium, R2000...)ro
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.4.1.1.2
cpuFrequencyFrequency of the CPU (in MHz, -1 = unknown)ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.4.1.1.3
cpuStepStep (version) of the CPU (-1 = unknown)ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.4.1.1.4
cpuStatusStatus of a CPU: unknown(1) : CPU status could not be evaluated disabled(2) : CPU was manually disabled in BIOS setup ok(3) : CPU is available and operating properly not-present(4) : CPU is not available, empty socket error(5) : CPU has encountered errors but is still in use fail(6) : CPU has failed and is disabled missing-termination(7): CPU socket needs a terminator module when not populated but the terminator is missing prefailure-warning(8) : CPU has too many correctable errors within a certain time periodro
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.4.1.1.6
cpuModelModel of the CPU (-1 = unknown)ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.4.1.1.7
cpuNameName of the CPU (e.g. 'Pentium', 'Pentium Pro' ...) as text stringro
DisplayString (SNMPv2-TC)
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.4.1.1.8
cpuSocketDesignationString containing the socket designation of a CPU. This is the same text that is written on the system board.ro
DisplayString (SNMPv2-TC)
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.4.1.1.9
cpuManufacturerString containing the CPU manufacturer.ro
DisplayString (SNMPv2-TC)
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.4.1.1.10
cpuNrLogicalsPerPhysicalNumber of logical CPUs within one physical CPU (for hyper-threading and multi-core CPUs). This is the sum of all cores and all logical CPUs of a hyper-threading CPU.ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.4.1.1.11
cpuCacheL1SizeLevel 1 cache size (kByte) of a physical CPU (0 if unknown or not available).ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.4.1.1.12
cpuCacheL2SizeLevel 2 cache size (kByte) of a physical CPU (0 if unknown or not available).ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.4.1.1.13
cpuCacheL3SizeLevel 3 cache size (kByte) of a physical CPU (0 if unknown or not available).ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.4.1.1.14
cpuNrCoresPerPhysicalNumber of cores within one physical CPU (for multi-core CPUs).ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.4.1.1.15
secondLevelCacheSizeSize of the second level cache (in kBytes, 0 if not available or disabled, -1 = unknown). Object will be made obsolete in next releases; use cpuCacheL2Size instead!ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.4.2
secondLevelCacheWritePolicyWrite policy of the second level cache (write-back, write-through). Object will be made obsolete in next releases (no longer required).ro
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.4.3
physicalMemorySizeSize of the whole physical memory on the system board (in MBytes, -1 = unknown)ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.4.4
baseMemorySizeSize of the base memory (below 1 MB) on the system board (in kBytes, -1 = unknown)ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.4.5
extendedMemorySizeSize of the extended memory (above 1 MB) on the system board (in MBytes, -1 = unknown)ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.4.6
utilizationMethodMethod to get utilization values: take-snapshot-now: get all values and store them to have all values at one certain time (set this object each time you want to get new values) get-current-values (default): get the values directly without buffering. The value unknown(1) cannot be set, a SET will deliver 'badValue'.rw
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.4.7
utilizationPciLoadLoad on the PCI bus (in percent; -1 if unknown); do no longer use this object for new implementations; object replaced by pciUtilizationTable.ro
Gauge
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.4.8
utilizationEisaLoadLoad on the EISA bus (in percent; -1 if unknown)ro
Gauge
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.4.9
memoryModulesTableTable with memory module descripitions
SEQUENCE OF MemoryModules
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.4.10
memoryModules
MemoryModules
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.4.10.1
memModuleNumberModule number (index, 0 based)ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.4.10.1.1
memModuleBankBank number the module belongs to (-1 = unknown).ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.4.10.1.2
memModuleStatusStatus of the memory module socket (OK, fail, disabled...). unknown(1) : module status could not be evaluated error(2) : module has encountered errors but is still in use ok(3) : module is available and operating properly not-available(4) : empty socket, module is not available fail(5) : module has failed and is disabled prefailure-warning(6) : module has too many correctable errors within a certain time period hot-space(7) : module is a hot-spare (standby) module, which can be used as a run-time-replacement for failed modules mirror(8) : module is part of a mirror disabled(9) : module was manually disabled in BIOS setup raid(10) : module is part of a memory module RAID systemro
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.4.10.1.3
memModuleErrorsNumber of (parity) errors in this module since last error count reset (-1 = unknown)ro
Counter
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.4.10.1.4
memModuleStartAddressStart address of the bank this memory belongs to (-1 = unknown). This object is obsolete when the main memory size exceeds 2 GByte. Use new object memModuleStartAddressMB instead.ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.4.10.1.5
memModuleSizeSize of this memory module (in bytes, -1 = unknown). This object is obsolete when the module's size exceeds 2 GByte. Use new object memModuleSizeMB instead.ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.4.10.1.6
memModuleTypeType of memory module (Parity, NoParity, ECD, EDO...). Will be made obsolete in next agent releases!!! Use memModuleType2 for newer implementations!ro
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.4.10.1.7
memModuleType2Information about the type of a memory module (Parity, ECC, EDO, SIMM, DIMM...). The type is a combination of one or more bits. Bit field: Bit 0 - Other Bit 1 - Unknown Bit 2 - Standard Bit 3 - Fast page mode Bit 4 - EDO Bit 5 - Parity Bit 6 - ECC Bit 7 - SIMM Bit 8 - DIMM Bit 9 - RIMM Unused bits are set to zero.ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.4.10.1.8
memModuleSocketDesignationString containing the socket designation of a memory module. This is the same text that is written on the system board.ro
DisplayString (SNMPv2-TC)
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.4.10.1.9
memModuleCorrectableErrorsNumber of correctable errors in this module since last error count reset (-1 = unknown)ro
Counter
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.4.10.1.10
memModuleApprovedInformation whether the memory module has been approved by the system vendor. unknown(1) is given when a module is not available or module cannot be accessed; no(2) when no approval information is found; yes(3) when a valid approval information is found in the module.ro
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.4.10.1.11
memModuleStartAddressMBStart address (in MBytes) of the bank this memory belongs to (-1 = unknown). This object makes the object memModuleStartAddress obsolete (4 GByte limit).ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.4.10.1.12
memModuleSizeMBSize (in MBytes) of this memory module (-1 = unknown). This object makes the object memModuleSize obsolete (4 GByte limit).ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.4.10.1.13
memoryErrorCounterResetReset the memory module error counters (and set a new start time), reading this object just returns the value 0.rw
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.4.11
memoryErrorCounterStartTimeTime when memory module error counters were started (seconds since 1/1/1970, -1 = unknown)ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.4.12
pciUtilizationTableTable with PCI bus utilization data; independent of utilizationMethod object, update method for this table is always get-current-values. The number of entries in this table can be read from MIB object sniScNumberPciBusses.
SEQUENCE OF PciUtilization
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.4.13
pciUtilization
PciUtilization
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.4.13.1
pciUtilBusNumberPCI bus number (index, 1..n)ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.4.13.1.1
pciUtilBusLoadPCI bus load (in percent, 0xffffffff if unknown)ro
Gauge
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.4.13.1.2
pciUtilBusTransferRatePCI bus data transfer rate (in MBytes/second, 0xffffffff if unknown)ro
Gauge
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.4.13.1.3
pciUtilBusEfficiencyPCI bus efficiency, ratio of data transfer rate through bus load (in percent); avarage value over all devices on this PCI bus; optimum value is 100 percent (0xffffffff if unknown).ro
Gauge
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.4.13.1.4
sniScBiosVersionStringString containing complete BIOS version, e.g. V4.05 R1.03.887ro
DisplayString (SNMPv2-TC)
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.4.14
sniScNumberCpuSocketsNumber of CPU sockets available on the system board. This is not the number of currently installed CPUs! This object also describes the number of entries in the 'cpuTable' (-1 = unknown).ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.4.15
sniScNumberMemoryModulesNumber of memory module sockets available on the system board (or memory extension board). This is not the number of currently installed memory modules! This object also describes the number of entries in the 'memoryModulesTable' (-1 = unknown).ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.4.16
sniScNumberPciBussesNumber of PCI busses available in the system (-1 = unknown).ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.4.17
totalMemoryUsageTotal system memory usage (virtual and physical, in KBytes, -1 = unknown)ro
Gauge
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.4.18
totalMemoryUsagePercentTotal system memory usage (virtual and physical, in percent, -1 = unknown)ro
Gauge
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.4.19
physicalMemoryUsagePhysical system memory usage (in KBytes, -1 = unknown)ro
Gauge
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.4.20
physicalMemoryUsagePercentPhysical system memory usage (in percent, -1 = unknown)ro
Gauge
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.4.21
totalMemoryAvailableTotal system memory available (virtual and physical, in KBytes, -1 = unknown)ro
Gauge
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.4.22
physicalMemoryAvailablePhysical system memory available (in KBytes, -1 = unknown)ro
Gauge
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.4.23
physicalMemoryOsSizeTotal size of the whole physical memory available to the operating system; this value is similar to 'physicalMemorySize', but may be less if the system has mirror or hot spare memory modules (in MBytes, -1 = unknown)ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.4.24
pagerSetup
OBJECT IDENTIFIER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.5
pagerUserTableTable with info of the users that should be paged
SEQUENCE OF PagerUser
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.5.1
pagerUser
PagerUser
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.5.1.1
pagerUserIndexIndex into pager user table (0 based)ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.5.1.1.1
pagerTypeType of the installed pager (signal, numeric, alfa-numeric). The value unknown(1) and not-available(2) cannot be set, a SET will deliver 'badValue'.rw
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.5.1.1.2
pagerUserNameName of the pager userrw
DisplayString (SNMPv2-TC)
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.5.1.1.3
pagerUserDescriptionDescription (function, optional) of the pager userrw
DisplayString (SNMPv2-TC)
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.5.1.1.4
pagerActiveDescribes whether this pager is active and should be called. The value unknown(1) cannot be set, a SET will deliver 'badValue'.rw
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.5.1.1.5
pagerNumberUser ID number of the user's pagerrw
DisplayString (SNMPv2-TC)
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.5.1.1.6
pagerServiceProviderNumberTelephone dial number of the pager service provider (can also contain additional modem dial characters)rw
DisplayString (SNMPv2-TC)
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.5.1.1.7
pagerActivityPromptPrompt string that should be received before pager number can be sentrw
DisplayString (SNMPv2-TC)
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.5.1.1.8
pagerTimeModelEncoded string containing a pager time model (when should which user be paged); this value is currently not used.rw
DisplayString (SNMPv2-TC)
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.5.1.1.9
pagerInitStringInit string that will be sent to the pager modem before the dialing beginsro
DisplayString (SNMPv2-TC)
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.5.2
pagerServerNumberNumber of this server. It is sent together with the error number as a message to the user's pager (-1 = unknown). The value unknown(-1) cannot be set, a SET will deliver 'badValue'.rw
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.5.3
pagerComPortCOM port number (1...4) the pager modem is connected to. The value unknown(1) cannot be set, a SET will deliver 'badValue'.rw
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.5.4
pagerComPortBaudRateBaud rate of the pager COM port. Following values are supported: 1200, 2400, 4800, 9600, 19200 (-1 = unknown). The value unknown(-1) cannot be set, a SET will deliver 'badValue'.rw
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.5.5
pagerComPortParityParity check configuration for the pager COM port. The value unknown(1) cannot be set, a SET will deliver 'badValue'.rw
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.5.6
pagerComPortNumBitsNumber of bits per byte on the pager COM port (7, 8, -1 = unknown). The value unknown(-1) cannot be set, a SET will deliver 'badValue'.rw
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.5.7
pagerComPortFlowControlFlow control method of the pager COM port (Hardware, XON/XOFF...). The value unknown(1) cannot be set, a SET will deliver 'badValue'.rw
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.5.8
pagerModemNameOptional modem name or type; can be used just as info to be displayed.rw
DisplayString (SNMPv2-TC)
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.5.9
standardBiosSetup
OBJECT IDENTIFIER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.7
stdSetupPasswordEnableTells whether a password is configured for the standard BIOS (read-only)ro
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.7.1
stdSetupBootSourceSource medium to boot from: Normal system or diagnostic system standard(2): standard boot diag-system(4): boot from alternate diagnostic system The source the diagnostic system is booted from is selected in object 'srvSetupRebootFailAction'. The value unknown(1) cannot be set, a SET will deliver 'badValue'.rw
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.7.2
stdSetupPostErrorHaltDescribes what to do when a POST error has occured (halt on any error, no halt on any error...). The values unknown(1) and other(9) cannot be set, a SET will deliver 'badValue'.rw
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.7.3
stdSetupSerialInterface1The COM port which the on-board serial interface 1 is mapped to (1...4). The value unknown(1) cannot be set, a SET will deliver 'badValue'.rw
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.7.4
stdSetupSerialInterface2The COM port which the on-board serial interface 2 is mapped to (1...4). The value unknown(1) cannot be set, a SET will deliver 'badValue'.rw
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.7.5
stdSetupParallelInterfaceThe LPT port which the on-board parallel interface is mapped to (1...3). The value unknown(1) cannot be set, a SET will deliver 'badValue'.rw
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.7.6
stdSetupFloppyControllerDescribes whether the floppy controller is enabled. The value unknown(1) cannot be set, a SET will deliver 'badValue'.rw
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.7.7
stdSetupHarddiskControllerDescribes whether the IDE harddisk controller is enabled. The value unknown(1) cannot be set, a SET will deliver 'badValue'.rw
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.7.8
stdSetupMouseControllerDescribes whether the mouse port controller is enabled. The value unknown(1) cannot be set, a SET will deliver 'badValue'.rw
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.7.9
serverBiosSetup
OBJECT IDENTIFIER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.8
srvSetupCabinetIdCabinet ID number of this server (-1 = unknown). The value unknown(-1) cannot be set, a SET will deliver 'badValue'. Use this number as cabinetId for all tables containing a cabinet index. If unknown is delivered, 0 should be used as cabinet index.rw
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.8.1
srvSetupServerRackSlotSlot number (in a rack) this server is in (only for rack servers; -1 = unknown). The value unknown(-1) cannot be set, a SET will deliver 'badValue'. This object is currently not used.rw
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.8.2
srvSetupServerGroupStartdeletedrwobsolete
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.8.3
srvSetupServerGroupEnddeletedrwobsolete
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.8.4
srvSetupServerGroupMembersdeletedrwobsolete
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.8.5
srvSetupSeGroupStartdeletedrwobsolete
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.8.6
srvSetupSeGroupEnddeletedrwobsolete
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.8.7
srvSetupSeGroupMembersdeletedrwobsolete
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.8.8
srvSetupRemoteOnEnableDescribes whether remote-on via RI modem line is enabled or not available. The value unknown(1) cannot be set, a SET will deliver 'badValue'.rw
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.8.9
srvSetupMaxRestartRetriesMaximum number of retries to reboot/restart the server when a shutdown (and power-off) had occured. After this number of retries the action defined in 'srvSetupRebootFailAction' will be executed (-1 = unknown, no retries). The value unknown(1) cannot be set, a SET will deliver 'badValue'.rw
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.8.10
srvSetupRebootFailActionDescribes the action on a specified number of failed reboot retries (srvSetupMaxRestartRetries=0): unknown(1) - diagnostic system cannot be determined (cannot be SET) switch-off(2) - no diag system, final power-off ide-diag-disk(3) - boot diag system from IDE disk no-diag-system(4) - no diag system available remote-image-disk(5) - boot from remote image (over LAN) pxe(6) - boot from PXE (Preboot eXecution Environment) rsb-usb(7) - boot from RSB remote source (via USB interface) bmc-remote(8) - boot from BMC from remote storage This value is also the source to be booted from when object 'stdSetupBootSource' is set to 'diag-system'.rw
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.8.11
srvSetupRebootFailPagerDescribes whether the pager should be activated when reboot after error shutdown had occured. The value unknown(1) cannot be set, a SET will deliver 'badValue'.rw
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.8.12
srvSetupSeGroupNumberGroup number for storage extension communication bus. Legal values are 0..9, -1 = unknown. The value unknown(-1) cannot be set, a SET will deliver 'badValue'.rw
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.8.13
srvSetupRestartRetriesDefaultDefault number of retries to reboot/restart the server when a shutdown (and power-off) had occured. This value will be copied to object srvSetupMaxRestartRetries by the user to reset the counter to its original (default) value (-1 = unknown, no retries). The value unknown(1) cannot be set, a SET will deliver 'badValue'.rw
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.8.14
powerOnOff
OBJECT IDENTIFIER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.9
onOffTimesTableTable with system power on/off times; power-on will be performed by the real-time clock, power-off (with shutdown) by the operating system (system control service); table must be enabled before using
SEQUENCE OF OnOffTimes
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.9.1
onOffTimes
OnOffTimes
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.9.1.1
onOffWeekdayDay of the week the times should act upon (index, 1 based); 1 = Sunday, 2 = Monday...ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.9.1.1.1
onTimeTime the system should be switched on (by the real-time clock; in minutes since midnight; -1 = disabled, no on time). Only values -1 and 0..1439 are allowed.rw
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.9.1.1.2
offTimeTime the system should be switched off (by the operating system; in minutes since midnight; -1 = disabled, no off time). Only values -1 and 0..1439 are allowed.rw
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.9.1.1.3
shutdownDelayTimeThe delay time (in minutes) the agent should wait before executing a shutdown (with doShutdown); 0 = default = shutdown immediately; -1 = unknown. The value unknown(-1) cannot be set, a SET will deliver 'badValue'.rw
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.9.2
doShutdownExecute a shutdown; argument tells what kind of shutdown: shutdown: wait for user to switch off or reboot shutdown-and-off: switch off after shutdown shutdown-and-reboot: reboot after shutdown abort-pending-shutdown: abort a delayed shutdown immediately (if not already initiated) Reading this object just returns the value 0.rw
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.9.3
powerOnCountsTells how often the server was switched on in its life (-1 = unknown)ro
Counter
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.9.4
powerOnDurationHoursTells how long the system was switched on in its life (in hours; -1 = unknown)ro
Counter
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.9.5
powerOffDurationHoursTells how long the system was switched off in its life (in hours; -1 = unknown)ro
Counter
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.9.6
errorOffRestartDelayDelay (in minutes) when the system should be automatically switched on again (by real-time clock) after an error power-off (-1 = no switch-on function). The value unknown(-1) cannot be set, a SET will deliver 'badValue'. On some platforms only the values 1, 2, 3, 5, 7, 10, 15 and 20 can be set. Values between these numbers will be rounded.rw
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.9.7
lastPostStatusDescribes whether the last (current) POST (power on self test) was errornous. Object is now obsolete - use object systemBootStatus instead!roobsolete
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.9.8
lastPowerOffSourceReason why the system was switched off last timero
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.9.9
lastPowerOnSourceSource the system was switched on fromro
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.9.10
powerOnTimeTime and Date the system was booted (seconds since 1/1/1970; -1 = unknown)ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.9.11
doPowerOnOffSwitch the server on or off; argument tells what kind of action: on: switch power on off: switch power off power-cycle: switch power off and switch power on again reset: perform a server reset nmi: perform a non-maskable interrupt (NMI, mainly for debugging purpose)rw
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.9.12
systemBootResultResult of the last server boot.ro
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.9.13
systemBootStatusStatus of the current boot process.ro
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.9.14
systemControlInfo
OBJECT IDENTIFIER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.10
numberCabinetsConfiguredNumber of configured cabinets (server and storage extensions, at least 1: the server itself)ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.10.1
numberCabinetsDetectedNumber of detected cabinets (server and storage extensions, at least 1: the server itself). This is also the number of entries in cabinetInfosTable.ro
Gauge
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.10.2
cabinetInfosTableTable with data of all configured cabinets
SEQUENCE OF CabinetInfos
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.10.3
cabinetInfos
CabinetInfos
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.10.3.1
cabinetIdCabinet ID number, index into the cabinet tablero
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.10.3.1.1
cabinetLocationThe place where the cabinet is located (user can store any string here to identify the cabinet location)rw
DisplayString (SNMPv2-TC)
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.10.3.1.2
cabinetIdentNumberSystem ident number (serial number) - will be a number like 'XYZZ 12345678'. XYZZ is the cabinet identifier and is mandatory. It will be used to identify the cabinet model name (i.e. PCD-5S). 12345678 is the cabinet serial number and is optional. Cabinet identifier and serial number are separated by a blank character!rw
DisplayString (SNMPv2-TC)
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.10.3.1.3
cabinetSystemNameSystem name string (i.e. PCD-5S, Primergy 150...)ro
DisplayString (SNMPv2-TC)
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.10.3.1.4
cabinetNumberFansThe number of configured cooling devices (fans) in this cabinet (-1 = unknown)ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.10.3.1.5
cabinetNumberTempSensorsThe number of configured temperature sensors in this cabinet (-1 = unknown)ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.10.3.1.6
cabinetNumberPowerSuppliesThe number of available power supplies in this cabinet (-1 = unknown)ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.10.3.1.7
cabinetPowerSupplySlotsThe number of power supply slots in this cabinet (is the maximum number of installable power supplies; 0 if no hot-plug slots available; -1 = unknown)ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.10.3.1.8
cabinetUpsUsedUninterruptable power supply for this cabinet available: 0: No UPS 1..n: Index in UPS table -1: unknownro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.10.3.1.9
cabinetBoardSerialNumberSerial number of the cabinet's system boardro
DisplayString (SNMPv2-TC)
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.10.3.1.10
cabinetBoardRevisionRevision (GS) of the cabinet's system board (-1 = unknown). Value obsolete, use sieScCabinetBoardRevisionString instead!roobsolete
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.10.3.1.11
cabinetBoardIdIdentifier string of the cabinet's system boardro
DisplayString (SNMPv2-TC)
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.10.3.1.12
cabinetManagementControllerTypeType of the cabinet's system management controller (i.e. SNI System Control Board)ro
DisplayString (SNMPv2-TC)
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.10.3.1.13
cabinetControllerFirmwareMajorFirmware version (major number) of the cabinet's system management controller (-1 = unknown). This object will be replaced by sieScCabinetControllerFirmware in future versions.ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.10.3.1.14
cabinetControllerFirmwareMinorFirmware version (minor number) of the cabinet's system management controller (-1 = unknown). This object will be replaced by sieScCabinetControllerFirmware in future versions.ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.10.3.1.15
cabinetAttributeAttribute of a cabinet (Primary/secondary server, storage extension...)ro
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.10.3.1.16
cabinetPowerOnStatusPower-on state of the cabinetro
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.10.3.1.17
cabinetStatusSummaryDescribes the status of a cabinet (OK, degraded, error...)ro
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.10.3.1.18
cabinetLastPoweroffSourceThe source from which the cabinet was powered off last timero
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.10.3.1.19
cabinetActionAfterAcFailAction on AC power resume after AC has failed. not-available(2) : function not available, behavior is hardware-defined. as-before(3) : server gets the same power state as before the AC fail. remain-off(4) : server remains off on power resume. switch-on(5) : server is always switched on on power resume. The value unknown(1) cannot be set, a SET will deliver 'badValue'.rw
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.10.3.1.20
cabinetBbuUsedBattery buffering unit for this cabinet available. The value unknown(1) cannot be set, a SET will deliver 'badValue'.ro
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.10.3.1.21
cabinetSystemTypeValue is obsolete. This value should no longer be used for cabinet identification. Use cabinetHousingType to identify the housing type and cabinetSystemName for the type of the cabinet!roobsolete
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.10.3.1.22
cabinetStatusDetailMore detailed status information from this cabinet. The StatusDetail object is set to reflect the new status. ok: (status ok) no failures detected. selftestWarning: (status degraded) the SCB firmware issued a warning condition. selftestFailure: (status error) the SCB firmware detected a failure that prevents it from functioning. powerFailure: (status degraded) the AC input at the power supply or the AC input at the UPS failed. fanFailure: (status error) A fan in this cabinet failed. The system is going to shut down. temperatureFailure: (status error) A sensor in this cabinet detected an over temperature. The system is going to shut down. communicationFailure: (status error) The SCB in the CPU cabinet has lost communication with the SCB in this cabinet. The system is going to shut down. powerOff: (status degraded) The cabinet is switched off.ro
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.10.3.1.23
cabinetHousingTypeType string for cabinet housing type (i.e. 'P300' for all PRIMERGY 3xx housings); this object should be used to identify the cabinet instead of using object cabinetSystemType (i.e. for painting pictures in management applications)ro
DisplayString (SNMPv2-TC)
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.10.3.1.24
cabinetFrontDoorStatusStatus of the cabinet's front doorro
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.10.3.1.25
cabinetHousingOpenStatusStatus describing whether the housing is open or closedro
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.10.3.1.26
sieScCabinetNumberVoltagesNumber of entries in power supply voltage tablero
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.10.3.1.27
sieScCabinetControllerFirmwareThe cabinet's system management controller firmware version (i.e. '1.1.4.88'). This object will replace the previous objects cabinetControllerFirmwareMinor and cabinetControllerFirmwareMajor.ro
DisplayString (SNMPv2-TC)
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.10.3.1.28
sieScCabinetBoardRevisionStringRevision string (GS, WGS...) of the cabinet's system board. This object replaces the previous object cabinetBoardRevision.ro
DisplayString (SNMPv2-TC)
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.10.3.1.29
sieScCabinetAdministrativeURLProvides a URL that may be used by a front-end to start a web browser and connect it directly to the cabinet's administrative web server (e.g. https://10.0.0.2:443/foobar.html).ro
DisplayString (SNMPv2-TC)
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.10.3.1.30
sieScRemcsIdREMCS system identification string (binary data): Format of Fujitsu REMCS ID (40byte) Format = TTMMMMMMMMMMMMmmmmmmmmmmmmCCnnnnnnnnnnnn TT : 2byte : Type ID for Company Name MM...M : 12byte : Model Name mm...m : 12byte : Device Name CC : 2byte : Checksum nn...n : 12byte : Serial numberro
DisplayString (SNMPv2-TC)
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.10.3.1.31
statusSummaryValue is obsoleteroobsolete
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.10.4
serverTypeValue is obsolete. This value should no longer be used for server identification. Use serverHousingType to identify the housing type and cabinetSystemName for the type of the server!roobsolete
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.10.5
serverHousingTypeType string for cabinet housing type (i.e. 'P300' for all PRIMERGY 3xx housings); this object should be used to identify the cabinet instead of using object serverType (i.e. for painting pictures in management applications). This is the same value as from object cabinetHousingType for the server cabinet.ro
DisplayString (SNMPv2-TC)
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.10.6
serverUUIDUniversal Unique ID (UUID) number - this is a world wide unique ID number of the server. Can be used for identifying a server. This UUID is formatted as specified in RFC 4122; shown in network byte order (big-endian). For little-endian format please use the SC2.MIB object sc2srvUUIDWireFormat! The UUID string format is like this: 157E465A-A4AC-D711-A847-DD85CECD12ECro
DisplayString (SNMPv2-TC)
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.10.7
powerSupply
OBJECT IDENTIFIER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.11
powerSuppliesTableTable with power supply groups in the cabinets
SEQUENCE OF PowerSupplies
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.11.1
powerSupplies
PowerSupplies
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.11.1.1
powerSupplyCabinetIdCabinet ID, index into the power supply table (0 based)ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.11.1.1.1
powerSupplyStatusStatus of the cabinet's power supply group; ok: all units OK, number >= minimum degraded: one or more units failed, number OK >= minimum critical: number OK < minimum.ro
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.11.1.1.2
powerSupplyRedundancyNumber of available redundant power supply units (i.e. 2 units minimum, 3 available -> redundancy is 1, -1 = unknown)ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.11.1.1.3
powerSupplyUnitsTableTable with info about the configured power supply units
SEQUENCE OF PowerSupplyUnits
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.11.2
powerSupplyUnits
PowerSupplyUnits
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.11.2.1
powerSupplyUnitCabinetIdCabinet ID, index into the power supply unit table (0 based)ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.11.2.1.1
powerSupplyUnitNumberPower supply unit number, index into power supply unit table (0 based)ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.11.2.1.2
powerSupplyUnitStatusStatus of the power supply unit (OK, failed, not present...)ro
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.11.2.1.3
powerSupplyUnitDesignationPower supply unit designation. This string specifies a name/designation for the power supply unit. The designation string may not be available on some platforms.ro
DisplayString (SNMPv2-TC)
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.11.2.1.4
sniScVoltageTableTable with power supply voltage information
SEQUENCE OF SniScVoltages
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.11.4
sniScVoltages
SniScVoltages
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.11.4.1
sniScVoltageCabinetNumberCabinet number, index into the power supply voltage table (0 based)ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.11.4.1.1
sniScVoltageNumberPower supply voltage number, index into power supply voltage table (0 based)ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.11.4.1.2
sniScVoltageStatusStatus of the power supply voltage; 'not-available' maybe the voltage of an empty CPU socket; 'out-of-range' comes when the voltage is out of range; 'prefailure' is used for battery voltages and informs that the battery is predicted to fail in near future.ro
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.11.4.1.3
sniScVoltageDesignationPower supply voltage designation. This string specifies the voltage by clear text (e.g. 5V, 12V, 3.3V...)ro
DisplayString (SNMPv2-TC)
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.11.4.1.4
sniScVoltageMinimumValuePower supply voltage minimum level (1/100th Volts; -1 = unknown)ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.11.4.1.5
sniScVoltageMaximumValuePower supply voltage maximum level (1/100th Volts; -1 = unknown)ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.11.4.1.6
sniScVoltageCurrentValuePower supply voltage current level, negative voltages are reported as negative values (1/100th Volts, e.g. 330 means 3.30 Volts; -177 (0xFFFFFF4F) means -1.77 Volts; 0xFFFFFFFF = unknown)ro
Gauge
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.11.4.1.7
sniScVoltageNominalValuePower supply voltage nominal level (1/100th Volts; -1 = unknown)ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.11.4.1.8
sniScVoltageOutputLoadPower supply output load in percent of maximum load; 0xFFFFFFFF = unknownro
Gauge
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.11.4.1.9
uninterruptablePowerSupply
OBJECT IDENTIFIER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.12
upsCountNumber of uninterruptable power supplies (UPS) in this system (-1 = unknown)ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.12.1
upsInfosTableTable with uninterruptable power supplies used in this system. The index is the UPS number used in the system. One or more server or storage-extension objects can reference to a UPS entry in this table.
SEQUENCE OF UpsInfos
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.12.2
upsInfos
UpsInfos
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.12.2.1
upsNumberNumber of the UPS in this table (index, 1 based)ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.12.2.1.1
upsDetectedTells whether the UPS was detectedro
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.12.2.1.2
upsDischargeTimeMaximum time this UPS will be discharged, after that a shutdown will be performed (seconds; -1 = unknown)ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.12.2.1.3
upsVendorVendor name of the UPSro
DisplayString (SNMPv2-TC)
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.12.2.1.4
upsTypeType of the UPS; can be used to identify an OEM UPS with an OEM agentro
DisplayString (SNMPv2-TC)
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.12.2.1.5
upsOemAgentObject identifier of an OEM UPS MIB; no agent if empty OIDro
DisplayString (SNMPv2-TC)
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.12.2.1.6
upsOemAgentAddressIP address of an OEM UPS SNMP agent; no agent if emptyro
IpAddress
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.12.2.1.7
upsTimeOnBatterySecondsTime (in seconds) the UPS is running on battery since power fail (will be cleared on power recovery)ro
Counter
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.12.2.1.8
spbbuStatusStatus of the service processor's backup battery (not present, OK, recharging)ro
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.12.3
spbbuDischargeTimeMaximum time this backup battery will be discharged, after that a shutdown will be performed (seconds; -1 = unknown)ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.12.4
spbbuTimeOnBatterySecondsTime (in seconds) the backup battery is running on battery since power fail (will be cleared on power recovery)ro
Counter
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.12.5
spbbuDoChargeCyclePerform a discharge/charge cycle on the backup battery. Reading this object just returns the value 0.rw
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.12.6
spbbuChargeStatusReads the current charge level of the rechargeable battery (in percent of the maximum capacity).ro
Gauge
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.12.7
diagnostics
OBJECT IDENTIFIER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.13
sendTestTrapSend a trap to the manager application(s) to test connection and trap configuration; trap cannot be disabled. Reading this object just returns the value 0.rw
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.13.1
management
OBJECT IDENTIFIER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.14
interfaceParametersTableTable with the interface parameters of all management channels, which are controlled by this server.
SEQUENCE OF InterfaceParameters
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.14.1
interfaceParametersThe interface parameters of the designated management channel interface.
InterfaceParameters
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.14.1.1
interfaceCabinetIdCabinetId of the cabinet where the management channel interface resides.ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.14.1.1.1
interfaceNumberIndex number of the channel management interface (index, 0 based).ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.14.1.1.2
interfaceTypeThe interface type of the interface.ro
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.14.1.1.3
ipAddressThe IP v4 address of the interface.ro
IpAddress
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.14.1.1.4
ipAdressNetMaskThe IP v4 subnet mask of the interface.ro
IpAddress
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.14.1.1.5
physicalAddressThe interface address of the physical layer of the interface (MAC address).ro
PhysAddress (SNMPv2-TC)
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.14.1.1.6
phoneNumberThe telephone dial number of this interface. Only useful if the interfaceType is of type dial-up(3).ro
DisplayString (SNMPv2-TC)
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.14.1.1.7
interfaceChannelTypeThe managegement channel type of the interface: primary: local operating system interface secondary: local management controller LAN interface management-blade: management blade interface (in a blade server chassis) secondary-remote: remote management controller (in an RSB concentrator environment) secondary-remote-backup: backup remote management controller baseboard-controller: baseboard management controllerro
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.14.1.1.8
dhcpConfiguredDefines if the ip address should be requested by a dhcp service.ro
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.14.1.1.9
controllerTypeThe type of the remote or baseboard management controller (for identification), like 'RSB', 'RSB S2', 'RSB S2 LP'... These names will not be changed if defined once.ro
DisplayString (SNMPv2-TC)
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.14.1.1.10
controllerModelThe model name of the remote management controller (for displaying), like 'Remote Service Board', 'RemoteView Service Board S2'... This name should not be used for identification, only for displaying (can be changed in different firmware versions)!ro
DisplayString (SNMPv2-TC)
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.14.1.1.11
controllerFWVersionThe FW version of the remote or baseboard management controller as string;ro
DisplayString (SNMPv2-TC)
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.14.1.1.12
serviceComponentsTableTable with the components attached to the service processor
SEQUENCE OF ServiceComponents
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.14.2
serviceComponentsThe components attached to the service processor
ServiceComponents
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.14.2.1
serviceComponentProcessorIdId of the service processor this component is attached to (index, 0 based)ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.14.2.1.1
serviceComponentIdIndex number of the service component (index, 0 based)ro
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.14.2.1.2
serviceComponentNameThe name of the component in human readable formro
DisplayString (SNMPv2-TC)
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.14.2.1.3
serviceComponentTypeThe type of the componen we are dealing with.ro
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.14.2.1.4
serviceComponentStatusDescribes the status of the component managed by the service processor. Degraded means that some problems have occurred. Error that the component has reported an error that prevents the component form working. Failed means that the component is no longer reacting to the agents requests.ro
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.14.2.1.5
channelTypeThe managegement channel type of the currently used management channel.ro
Enumeration
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.14.3
trapInfo
OBJECT IDENTIFIER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.20
trapServerNameName of server the trap occured
DisplayString (SNMPv2-TC)
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.20.1
trapTimeTime the trap occured (in seconds since 01/01/1970 00:00h)
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.20.2
trapCabinetNumberNumber of the cabinet where the trap was generated
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.20.3
trapObjectNumberNumber of the object that generated the trap (fan, temperature sensor...)
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.20.4
trapStringAdditional string to be displayed in the trap text
DisplayString (SNMPv2-TC)
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.20.5
trapMinutesRemainingThe estimated remaining BBU/UPS capacity in minutes. In the current implementation this is the time remaining until the system will shut down.
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.20.6
trapSecondsOnBatterySee scbUPSSecondsOnBattery/scbBBUSecondsOnBattery.
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.20.7
trapConfigLowBattTimeThe value of trapMinutesRemaining at which a shut down is initiated. In the current implementation this is always 0.
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.20.8
trapNumValueAdditional numeric value to be displayed in the trap text
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.20.9
trapManagementInterfaceNumberThe number of the management channel interface.
INTEGER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.2.5.20.10
sniPcSpecific
OBJECT IDENTIFIER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.3
sniScb
OBJECT IDENTIFIER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.4
sniOsSpecific
OBJECT IDENTIFIER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.5
sniNetware
OBJECT IDENTIFIER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.5.1
sniWinNt
OBJECT IDENTIFIER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.5.2
sniOs2
OBJECT IDENTIFIER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.5.3
sniUnix
OBJECT IDENTIFIER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.5.4
sniOemComponents
OBJECT IDENTIFIER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.6
sniOemDpt
OBJECT IDENTIFIER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.6.1
sniOemMylex
OBJECT IDENTIFIER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.6.2
sniMlxDiskArray
OBJECT IDENTIFIER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.6.2.1
sniSecurity
OBJECT IDENTIFIER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.7
sniSmSecurity
OBJECT IDENTIFIER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.7.1
sniServerView
OBJECT IDENTIFIER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.2.8
sniTrapMib
OBJECT IDENTIFIER
.1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3.6.1.1.1.3.6.1.4.4.1.231.2.10.5
SNI-SERVER-CONTROL-MIB - SNMP MIB Reference | MIBs Explorer