SNA-LLC-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for SNA-LLC-MIB.
155
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
155 total| Object Name |
|---|
snaDLCexp OBJECT IDENTIFIER .1.3.6.1.3.51 |
SNMPv2-SMI Unknown .1.3.6.1.3.51 |
llc OBJECT IDENTIFIER .1.3.6.1.3.51.1 |
llcPortGroup OBJECT IDENTIFIER .1.3.6.1.3.51.1.1 |
llcPortAdminTableThis table contains objects that can be
changed to manage an LLC port. Changing one
of these parameters may take effect in the
operating port immediately or may wait until
the interface is restarted depending on the
details of the implementation.
Most of the objects in this read-write table
have corresponding read-only objects in the
llcPortOperTable that return the current
operating value.
The operating values may be different from
these configured values if a configured
parameter was changed after the interface was
started. SEQUENCE OF LlcPortAdminEntry .1.3.6.1.3.51.1.1.1 |
llcPortAdminEntryA list of configured values for an LLC port. LlcPortAdminEntry .1.3.6.1.3.51.1.1.1.1 |
llcPortAdminNameAn octet string that defines the physical port
to which this interface is assigned. It has
implementation-specific significance. Its value
shall be unique within the administered
system. It must contain only ASCII printable
characters. Should an implementation choose to
accept a write operation for this object, it
causes the logical port definition associated
with the table instance to be moved to a
different physical port. A write operation
shall not take effect until the port is cycled
inactive.rw DisplayString .1.3.6.1.3.51.1.1.1.1.1 |
llcPortAdminStateThis parameter controls the desired state of
the LLC protocol for this interface.rw Enumeration .1.3.6.1.3.51.1.1.1.1.2 |
llcPortAdminMaxIPDUOctetsSendThis object denotes the default maximum I PDU
size, in octets, that LLCs on this port may
send to their remote LLC partners. This count
is referred to as 'N1' in the IEEE 802.2
specification [??].
This port default value may be overridden by a
non-zero SAP default value in the
llcSapAdminMaxIPDUOctetsSend object or by a
non-zero value in the
llcCcAdminMaxIPDUOctetsSend object.
At connection setup, the remote LLC may send,
using an XID frame, the maximum I PDU size
which it is prepared to receive. If so, an
implementation may choose to override the
administered maximum PDU size with the
dynamically learned value and should reflect
this in the llcCcOperMaxIPDUOctetsSend object
for the connection component.
The I PDU size includes all octets in a frame,
excluding framing characters, the MAC header
and link link header.rw Integer32 .1.3.6.1.3.51.1.1.1.1.3 |
llcPortAdminMaxIPDUOctetsRcvThis object denotes the default maximum I PDU size,
in octets, that LLCs on this port can expect to receive
from their remote LLC partners. This count is referred
to as 'N1' in the IEEE 802.2 specification [??]
This port default value may be overridden by a
non-zero SAP default value in the
llcSapAdminMaxIPDUOctetsRcv object or by a non-zero
value in the llcCcAdminMaxIPDUOctetsRcvd object.
At connection setup, an implementation may choose to
send this value to the remote LLC, using an XID
frame.
The I PDU size includes all octets in a frame with the
exception of the framing characters, the MAC header
and the link header.rw Integer32 .1.3.6.1.3.51.1.1.1.1.4 |
llcPortAdminMaxUnackedIPDUsSendThis object denotes the default maximum
consequetive unacknowledged I PDU frames that
LLCs on this port may send to their remote LLC
partners. This count is referred to as 'k' in
the IEEE 802.2 specification [??].
This port default value may be overridden by a
non-zero SAP default value in the
llcSapAdminMaxUnackedIPDUsSend object or by a
non-zero value in the
llcCcAdminMaxUnackedIPDUsSend object.
At connection setup, the remote LLC may send,
using an XID frame, the maximum number of
unacknowledged I PDUs which it is prepared to
receive. If so, an implementation may choose to
override the administered maximum number of
unacknowledged PDUs with the dynamicly learned
value and should reflect this in the
llcCcOperMaxUnackedIPDUsSend object for the
connection component.rw INTEGER .1.3.6.1.3.51.1.1.1.1.5 |
llcPortAdminMaxUnackedIPDUsRcvThis object denotes the default maximum number
of unacknowledged I PDUs that LLCs on this port
can expect to receive from their remote LLC
partners. This count is referred to as 'k' in
the IEEE 802.2 specification [??].
This port default value may be overridden by a
non-zero SAP default value in the
llcSapAdminMaxUnackedIPDUsRcv object or by a
non-zero value in the
llcCcAdminMaxUnackedIPDUsRcvd object.
At connection setup, an implementation may
choose to send this value to the remote LLC,
using an XID frame.rw INTEGER .1.3.6.1.3.51.1.1.1.1.6 |
llcPortAdminMaxRetransmitsThis object denotes the default value for the
maximum number of times which LLCs on this port
shall retry a PDU following the expiration of
the acknowledgement timer, the P-bit timer or
the reject timer. When these retries are
exhausted, the link shall be declared inactive.
This count is referred to as 'N2' in the IEEE
802.2 specification [??].
This port default value may be overridden by a
non-zero SAP default value in the
llcSapAdminMaxretransmits object or by a
non-zero value in the llcCcAdminMaxRetransmits
object.rw INTEGER .1.3.6.1.3.51.1.1.1.1.7 |
llcPortAdminAckTimerThis object denotes the default value for the
time interval during which the LLCs on this port
shall expect to receive either:
1) an acknowledgement to one or more outstanding
I PDUs. or 2) a response PDU to an unnumbered
command PDU.
The expiration of this timer shall cause the
frame unacknowledged frames to be retransmitted
(up to N2 times).
alue in the
llcSapAdminAckTimer object or by a non-zero
value in the llcCcAdminAckTimer object.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.3.51.1.1.1.1.8 |
llcPortAdminPbitTimerThis object denotes the default value for the
time interval during which the LLCs on this
port shall expect to receive a PDU with the F
bit set to '1' in response to a Type 2 command
with the P bit set to '1'.
The expiration of this timer shall cause the
command with the poll bit to be retransmitted
(up to N2 times).
This port default value may be overridden by a
non-zero SAP default value in the
llcSapAdminPbitTimer object or by a non-zero
value in the llcCcAdminPbitTimer object.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.3.51.1.1.1.1.9 |
llcPortAdminRejTimerThis object denotes the default value for the
time interval during which the LLCs on this
port shall expect to receive a reply to a REJ
PDU.
The expiration of this timer shall cause the
REJ PDU to be retransmitted (up to N2 times).
This port default value may be overridden by a
non-zero SAP default value in the
llcSapAdminRejTimer object or by a non-zero
value in the llcCcAdminRejTimer object.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.3.51.1.1.1.1.10 |
llcPortAdminBusyTimerThis object denotes the default value for the
time interval during which the LLCs on this
port shall expect to receive an indication that
a busy condition at the remote LLC has
cleared.
The expiration of this timer shall cause the
link to be declared inactive.
This port default value may be overridden by a
non-zero SAP default value in the
llcSapAdminBusyTimer object or by a non-zero
value in the llcCcAdminBusyTimer object.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.3.51.1.1.1.1.11 |
llcPortAdminInactTimerThis object denotes the default value for the
time interval during which the LLCs on this
port shall expect to receive any PDU from the
remote LLC. This function is not described in
the IEEE 802.2 specification [??] but is widely
implemented.
The expiration of this timer shall cause the
local LLC to send a PDU to the remote LLC with
the P bit set to '1'.
This port default value may be overridden by a
non-zero SAP default value in the
llcSapAdminInactTimer object or by a non-zero
value in the llcCcAdminInactTimer object.
Any value for this object less than or equal to
the acknowledgement timer shall mean that the
timer is not used.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.3.51.1.1.1.1.12 |
llcPortAdminDelayAckCountThis object denotes the default value for the
maximum number of consequetive I PDUs which the
LLCs on this port shall receive during the
interval defined by llcCcOperDelayTimertime
without sending an immediate acknowledgement.
This must be less than or equal to the value of
llcCcOperMaxUnackIPDURcv. This function is not
described in the IEEE 802.2 specification [??]
but is widely implemented.
This port default value may be overridden by a
non-zero SAP default value in the
llcSapAdminDelayAckCount object or by a
non-zero value in the llcCcAdminDelayCount
object.
A value of one indicates that acknowledgments
will be sent immediately and that the value of
llcPortAdminDelayAckTimer shall be ignored.rw INTEGER .1.3.6.1.3.51.1.1.1.1.13 |
llcPortAdminDelayAckTimerThis object denotes the default value for the
time interval during which the LLCs on this
port shall delay acknowledgment of one or more
I PDUs (up to the value of
llcCcOperDelayAckCount). This function is not
described in the IEEE 802.2 specification [??]
but is widely implemented.
The expiration of this timer shall cause the
local LLC to acknowledge all unacknowledged I
PDUs.
This object is associated with the
llcSapAdminDelayAckCount object and is only
defined if that object has a value greater than
one.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.3.51.1.1.1.1.14 |
llcPortAdminSimRimThis object controls the support for
transmission and receipt of SIM and RIM control
frames for this port.rw Enumeration .1.3.6.1.3.51.1.1.1.1.15 |
llcPortOperTableThis table contains current LLC port
parameters. Many of these objects have
corresponding objects inthe llcPortAdminTable. SEQUENCE OF LlcPortOperEntry .1.3.6.1.3.51.1.1.2 |
llcPortOperEntryCurrently set parameters for a specific LLC port. LlcPortOperEntry .1.3.6.1.3.51.1.1.2.1 |
llcPortOperNameAn octet string that describes the physical
port to which this interface is currently
attached. It has implementation-specific
significance.ro DisplayString .1.3.6.1.3.51.1.1.2.1.1 |
llcPortOperISTATUSThis parameter describes the initial value of
the administrative status, ifAdminStatus, of
this LLC port at last port start-up.ro Enumeration .1.3.6.1.3.51.1.1.2.1.2 |
llcPortOperLastModifyTimeThis object describes the value of sysUpTime
when this port definition was last modified.
If the port has not been modified, then this
value shall be zero.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.3.51.1.1.2.1.3 |
llcPortOperLastFailTimeThis object describes the value of sysUpTime
when this LLC port last failed. If the port
has not failed, then this value shall be zero.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.3.51.1.1.2.1.4 |
llcPortOperLastFailCauseThis enumerated object describes the cause of
the last failure of this LLC port. If the port
has not failed, then this object has a value of
undefined(1).ro Enumeration .1.3.6.1.3.51.1.1.2.1.5 |
llcPortStatsTableEach entry in this table contains statistics
for a specific LLC port. SEQUENCE OF LlcPortStatsEntry .1.3.6.1.3.51.1.1.3 |
llcPortStatsEntryA list of statistics for an LLC port. LlcPortStatsEntry .1.3.6.1.3.51.1.1.3.1 |
llcPortStatsPhysicalFailuresThis object reflects the total number of times
this port has failed due to its physical media
since port startup. At port startup time, this
object must be initialized to zero.ro Counter32 .1.3.6.1.3.51.1.1.3.1.1 |
llcPortStatsPollsInThis object reflects the total number of polls
received by this port since the port was
created.ro Counter32 .1.3.6.1.3.51.1.1.3.1.2 |
llcPortStatsPollsOutThis object reflects the total number of polls
sent by this port since the port was created.ro Counter32 .1.3.6.1.3.51.1.1.3.1.3 |
llcPortStatsPollRspsInThis object reflects the total number of poll
responses received by this port since the port
was created.ro Counter32 .1.3.6.1.3.51.1.1.3.1.4 |
llcPortStatsPollRspsOutThis object reflects the total number of poll
responses sent by this port since the port was
created.ro Counter32 .1.3.6.1.3.51.1.1.3.1.5 |
llcPortStatsLocalBusiesThis object reflects the total number of
times that the local link stations on this
port have entered a busy state (RNR). This
object is initialized to zero when the port is
created.ro Counter32 .1.3.6.1.3.51.1.1.3.1.6 |
llcPortStatsRemoteBusiesThis object reflects the total number of
times that the adjacent (i.e. remote) link
stations on this port have entered a busy
state (RNR). This object is initialized to
zero when the port is created.ro Counter32 .1.3.6.1.3.51.1.1.3.1.7 |
llcPortStatsIFramesInThis object reflects the total number of
I-Frames that have been received by link
stations on this port. This object is
initialized to zero when the port is created.ro Counter32 .1.3.6.1.3.51.1.1.3.1.8 |
llcPortStatsIFramesOutThis object reflects the total number of
I-Frames that have been transmitted by link
stations on this port. This object is
initialized to zero when the port is created.ro Counter32 .1.3.6.1.3.51.1.1.3.1.9 |
llcPortStatsOctetsInThis object reflects the total octets
received from adjacent link stations on this
port. This object covers the address,
control, and information field of I-Frames
only. This object is initialized to zero when
the port is created.ro Counter32 .1.3.6.1.3.51.1.1.3.1.10 |
llcPortStatsOctetsOutThis object reflects the total octets
transmitted to adjacent link stations on this
port. This object covers the address,
control, and information field of I-Frames
only. This object is initialized to zero when
the port is created.ro Counter32 .1.3.6.1.3.51.1.1.3.1.11 |
llcPortStatsProtocolErrsThis object reflects the total number of
times that the link stations on this port have
deactivated the link as a result of having
received a protocol violation from the
adjacent link station. This object is
initialized to zero when the port is created.ro Counter32 .1.3.6.1.3.51.1.1.3.1.12 |
llcPortStatsActivityTOsThis object reflects the total number of
times that the link stations on this port
have deactivated the link as a result of no
activity on the link. This object is
initialized to zero when the port is created.ro Counter32 .1.3.6.1.3.51.1.1.3.1.13 |
llcPortStatsRetriesExpsThis object reflects the total number of
times that the link stations on this port
have deactivated the link as a result of a
retry sequence being exhausted. This object
is initialized to zero when the port is
created.ro Counter32 .1.3.6.1.3.51.1.1.3.1.14 |
llcPortStatsRetransmitsInThis object reflects the total number of
I-Frames retransmitted by remote link stations
for all link stations on this port. This
object is initialized to zero when the port is
created.ro Counter32 .1.3.6.1.3.51.1.1.3.1.15 |
llcPortStatsRetransmitsOutThis object reflects the total number of
I-Frames retransmitted by all local link
stations on this port. This object is
initialized to zero when the port is created.ro Counter32 .1.3.6.1.3.51.1.1.3.1.16 |
llcSapGroup OBJECT IDENTIFIER .1.3.6.1.3.51.1.2 |
llcSapAdminTableThis table contains objects that can be
changed to manage a local SAP. Changing one
of these parameters may take effect in the
operating SAP immediately or may wait until the
interface is restarted depending on the details
of the implementation.
Most of the objects in this read-write table
have corresponding read-only objects in the
llcSapOperTable that return the current
operating value.
The operating values may be different from
these configured values if a configured
parameter was changed after the interface was
started. SEQUENCE OF LlcSapAdminEntry .1.3.6.1.3.51.1.2.1 |
llcSapAdminEntryA list of configured values for a local SAP. LlcSapAdminEntry .1.3.6.1.3.51.1.2.1.1 |
llcSapNumberThe address of this local SAP.rw INTEGER .1.3.6.1.3.51.1.2.1.1.1 |
llcSapAdminStateThis parameter controls the desired state of
this local SAP.rw Enumeration .1.3.6.1.3.51.1.2.1.1.2 |
llcSapAdminMaxIPDUOctetsSendThis object denotes the default maximum I PDU
size, in octets, that LLCs on this SAP may send
to their remote connection component partners.
This count is referred to as 'N1' in the IEEE
802.2 specification [??].
A zero value for this object indicates that the
port default, llcPortAdminMaxIPDUOctetsSend,
shall be used as the SAP default. This SAP
default value may be overridden by a non-zero
value in the llcCcAdminMaxIPDUOctetsSend
object.
At connection setup, the remote LLC may send,
using an XID frame, the maximum I PDU size
which it is prepared to receive. If so, an
implementation may choose to override the
administered maximum PDU size with the
dynamically learned value and should reflect
this in the llcCcOperMaxIPDUOctetsSend object
for the connection component.
The I PDU size includes all octets in a frame,
excluding framing characters, the MAC header
and link link header.rw Integer32 .1.3.6.1.3.51.1.2.1.1.3 |
llcSapAdminMaxIPDUOctetsRcvThis object denotes the default maximum I PDU
size, in octets, that LLCs on this SAP can
expect to receive from their remote LLC
partners. This count is referred to as 'N1' in
the IEEE 802.2 specification [??]
A zero value for this object indicates that the
port default, llcPortAdminMaxIPDUOctetsRcv,
shall be used as the SAP default. This SAP
default value may be overridden by a non-zero
value in the llcCcAdminMaxIPDUOctetsRcv
object.
At connection setup, an implementation may
choose to send this value to the remote LLC,
using an XID frame.
The I PDU size includes all octets in a frame
with the exception of the framing characters,
the MAC header and the link header.rw Integer32 .1.3.6.1.3.51.1.2.1.1.4 |
llcSapAdminMaxUnackedIPDUsSendThis object denotes the default maximum
consequetive unacknowledged I PDU frames that
LLCs on this SAP may send to their remote LLC
partners. This count is referred to as 'k' in
the IEEE 802.2 specification [??].
A zero value for this object indicates that the
port default, llcPortAdminMaxUnackedIPDUsSend,
shall be used as the SAP default. This SAP
default value may be overridden by a non-zero
value in the llcCcAdminMaxUnackedIPDUsSend
object.
At connection setup, the remote LLC may send,
using an XID frame, the maximum number of
unacknowledged I PDUs which it is prepared to
receive. If so, an implementation may choose to
override the administered maximum number of
unacknowledged PDUs with the dynamicly learned
value and should reflect this in the
llcCcOperMaxUnackedIPDUsSend object for the
connection component.rw INTEGER .1.3.6.1.3.51.1.2.1.1.5 |
llcSapAdminMaxUnackedIPDUsRcvThis object denotes the default maximum number
of unacknowledged I PDUs that LLCs on this SAP
can expect to receive from their remote LLC
partners. This count is referred to as 'k' in
the IEEE 802.2 specification [??].
A zero value for this object indicates that the
port default, llcPortAdminMaxUnackedIPDUsRcv,
shall be used as the SAP default. This SAP
default value may be overridden by a non-zero
value in the llcCcAdminMaxUnackedIPDUsRcv
object.
At connection setup, an implementation may
choose to send this value to the remote LLC,
using an XID frame.rw INTEGER .1.3.6.1.3.51.1.2.1.1.6 |
llcSapAdminMaxRetransmitsThis object denotes the default value for the
maximum number of times that LLCs on this SAP
shall retry PDUs following the expiration of
the acknowledgement timer, the P-bit timer or
the reject timer. When these retries are
exhausted, thelink shall be declared inactive.
This count is referred to as 'N2' in the IEEE
802.2 specification [??].
A zero value for this object indicates that the
port default, llcPortAdminMaxRetransmits, shall
be used as the SAP default. This SAP default
value may be overridden by a non-zero value in
the llcCcAdminMaxRetransmits.rw INTEGER .1.3.6.1.3.51.1.2.1.1.7 |
llcSapAdminAckTimerThis object denotes the default value for the
time interval during which the LLCs on this SAP
shall expect to receive either:
1) an acknowledgement to one or more
outstanding I PDUs. or 2) a response PDU to an
unnumbered command PDU.
The expiration of this timer shall cause the
frame unacknowledged frames to be retransmitted
(up to N2 times).
A zero value for this object indicates that the
port default, llcPortAdminAckTimer, shall be
used as the SAP default. This SAP default
value may be overridden by a non-zero value in
the llcCcAdminAckTimer.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.3.51.1.2.1.1.8 |
llcSapAdminPbitTimerThis object denotes the default value for the
time interval during which the LLCs on this
port shall expect to receive a PDU with the F
bit set to '1' in response to a Type 2 command
with the P bit set to '1'.
The expiration of this timer shall cause the
REJ PDU to be retransmitted (up to N2 times).
A zero value for this object indicates that the
port default, llcPortAdminPbitTimer, shall be
used as the SAP default. This SAP default
value may be overridden by a non-zero value in
the llcCcAdminPbitTimer.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.3.51.1.2.1.1.9 |
llcSapAdminRejTimerThis object denotes the default value for the
time interval during which the LLCs on this SAP
shall expect to receive a reply to a REJ PDU.
The expiration of this timer shall cause the
REJ PDU to be retransmitted (up to N2 times).
A zero value for this object indicates that the
port default, llcPortAdminRejTimer, shall be
used as the SAP default. This SAP default
value may be overridden by a non-zero value in
the llcCcAdminRejTimer.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.3.51.1.2.1.1.10 |
llcSapAdminBusyTimerThis object denotes the default value for the
time interval during which the LLCs on this SAP
shall expect to receive an indication that a
busy condition at the remote LLC has cleared.
The expiration of this timer shall cause the
link to be declared inactive.
A zero value for this object indicates that the
port default, llcPortAdminBusyTimer, shall be
used as the SAP default. This SAP default
value may be overridden by a non-zero value in
the llcCcAdminBusyTimer.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.3.51.1.2.1.1.11 |
llcSapAdminInactTimerThis object denotes the default value for the
time interval during which the LLCs on this SAP
shall expect to receive any PDU from the remote
LLC. This function is not described in the
IEEE 802.2 specification [??] but is widely
implemented.
The expiration of this timer shall cause the
local LLC to send a PDU to the remote LLC with
the P bit set to '1'.
A zero value for this object indicates that the
port default, llcPortAdminInactTimer, shall be
used as the SAP default. This SAP default
value may be overridden by a non-zero value in
the llcCcAdminInactTimer.
Any value for this object less than or equal to
the acknowledgement timer shall mean that the
timer is not used.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.3.51.1.2.1.1.12 |
llcSapAdminDelayAckCountThis object denotes the default value for the
maximum number of consequetive I PDUs which the
LLCs on this SAP shall receive during the
interval defined by llcCcOperDelayTimer without
sending an immediate acknowledgement. This
must be less than or equal to the value of
llcCcOperMaxUnackIPDURcv. This function is not
described in the IEEE 802.2 specification [??]
but is widely implemented.
A zero value for this object indicates that the
port default, llcPortAdminDelayAck, shall be
used as the SAP default. This SAP default
value may be overridden by a non-zero value in
the llcCcAdminDelayAckCount.
A value of one indicates that acknowledgments
will be sent immediately and that the value of
llcSapAdminDelayAckTimer shall be ignored.rw INTEGER .1.3.6.1.3.51.1.2.1.1.13 |
llcSapAdminDelayAckTimerThis object denotes the default value for the
time interval during which the LLCs on this SAP
shall delay acknowledgment of one or more I
PDUs (up to the value of
llcCcOperDelayAckCount). This function is not
described in the IEEE 802.2 specification [??]
but is widely implemented.
The expiration of this timer shall cause the
local LLC to acknowledge all unacknowledged I
PDUs.
This object is associated with the
llcSapAdminDelayAckCount object and is only
defined if that object has a value greater than
one.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.3.51.1.2.1.1.14 |
llcSapOperTableThis table contains objects that reflect the
current operational parameters of a local SAP.
Many of these objects in this table have
corresponding objects in the llcSapAdminTable. SEQUENCE OF LlcSapOperEntry .1.3.6.1.3.51.1.2.2 |
llcSapOperEntryA list of configured values for a local SAP. LlcSapOperEntry .1.3.6.1.3.51.1.2.2.1 |
llcSapOperStatusThis parameter describes the actual state of
this local SAP.ro Enumeration .1.3.6.1.3.51.1.2.2.1.1 |
llcSapStatsTableThis table contains objects that reflect the
current operational parameters of a local SAP.
Many of these objects in this table have
corresponding objects in the llcSapAdminTable. SEQUENCE OF LlcSapStatsEntry .1.3.6.1.3.51.1.2.3 |
llcSapStatsEntryA list of configured values for a local SAP. LlcSapStatsEntry .1.3.6.1.3.51.1.2.3.1 |
llcSapStatsTESTsInThis object reflects the total number of TEST
frames (both commands and responses) received on
a local SAP.ro Counter32 .1.3.6.1.3.51.1.2.3.1.1 |
llcSapStatsTESTsOutThis object reflects the total number of TEST
frames (both commands and responses) sent on
a local SAP.ro Counter32 .1.3.6.1.3.51.1.2.3.1.2 |
llcSapStatsXIDsInThis object reflects the total number of XID
frames (both commands and responses) received on
a local SAP.ro Counter32 .1.3.6.1.3.51.1.2.3.1.3 |
llcSapStatsXIDsOutThis object reflects the total number of XID
frames (both commands and responses) sent on
a local SAP.ro Counter32 .1.3.6.1.3.51.1.2.3.1.4 |
llcSapStatsUIFramesInThis object reflects the total number of
unnumbered information (UI) frames received on
a local SAP.ro Counter32 .1.3.6.1.3.51.1.2.3.1.5 |
llcSapStatsUIFramesOutThis object reflects the total number of
unnumbered information (UI) frames sent on a
local SAP.ro Counter32 .1.3.6.1.3.51.1.2.3.1.6 |
llcCcGroup OBJECT IDENTIFIER .1.3.6.1.3.51.1.3 |
llcCcAdminTableThis table contains objects that can be
changed to manage an LLC link station.
Changing one of these parameters may take
effect in the operating link immediately or may
wait until the link is restarted depending on
the details of the implementation.
The entries in llcCcAdminTable can be created
either by an agent or a management station. The
management station can create an entry in
llcCcAdminTable by setting the appropriate
value in llcCcAdminRowStatus.
Most of the objects in this read-create table
have corresponding read-only objects in the
llcCcOperTable that reflect the current
operating value.
The operating values may be different from
these configured values if changed by XID
negotiation or if a configured parameter was
changed after the link was started. SEQUENCE OF LlcCcAdminEntry .1.3.6.1.3.51.1.3.1 |
llcCcAdminEntryA list of configured values for an LLC link
station. LlcCcAdminEntry .1.3.6.1.3.51.1.3.1.1 |
llcCcLSapThis value is the address of the local SAP
for this Connection Component.rw INTEGER .1.3.6.1.3.51.1.3.1.1.1 |
llcCcRSapThis value is the address of the remote SAP
for this Connection Component.rw INTEGER .1.3.6.1.3.51.1.3.1.1.2 |
llcCcLMacThis value is the local MAC address for this
Connection Component.rw OCTET STRING .1.3.6.1.3.51.1.3.1.1.3 |
llcCcRMacThis value is the remote MAC address for this
Connection Component.rw OCTET STRING .1.3.6.1.3.51.1.3.1.1.4 |
llcCcAdminStateThis object controls the desired state of the
LLC connection. The managed system shall attempt
to keep the operational state, llcCcOperState,
consistent with this value.rw Enumeration .1.3.6.1.3.51.1.3.1.1.5 |
llcCcAdminMaxIPDUOctetsSendThis object denotes the maximum I PDU size, in
octets, that this LLC SAP may send to its
remote connection component partner. This count
is referred to as 'N1' in the IEEE 802.2
specification [??].
This object contains an administrative value
which will be applied the next time this
connection is established. A zero value for
this object indicates that the SAP default,
llcSapAdminMaxIPDUOctetsSend, shall be used.
At connection setup, the remote LLC may send,
using an XID frame, the maximum I PDU size
which it is prepared to receive. If so, an
implementation may choose to override the
administered maximum PDU size with the
dynamically learned value and should reflect
this in the llcCcOperMaxIPDUOctetsSend object
for the connection component.
The I PDU size includes all octets in a frame,
excluding framing characters, the MAC header
and link link header.rw Integer32 .1.3.6.1.3.51.1.3.1.1.6 |
llcCcAdminMaxIPDUOctetsRcvThis object denotes the maximum I PDU size,in
octets, that this LLC can expect to receive
from its remote LLC partner. This count is
referred to as 'N1' in the IEEE 802.2
specification [??]
This object contains an administrative value
which will be applied the next time this
connection is established. A zero value for
this object indicates that the SAP default,
llcSapAdminMaxIPDUOctetsRcv, shall be used.
At connection setup, an implementation may
choose to send this value to the remote LLC,
using an XID frame.
The I PDU size includes all octets in a frame
with the exception of the framing characters,
the MAC header and the link header.rw Integer32 .1.3.6.1.3.51.1.3.1.1.7 |
llcCcAdminMaxUnackedIPDUsSendThis object denotes the maximum consequetive
unacknowledged I PDU frames that this LLC may
send to its remote LLC partner. This count is
referred to as 'k' in the IEEE 802.2
specification [??].
This object contains an administrative value
which will be applied the next time this
connection is established. A zero value for
this object indicates that the SAP default,
llcSapAdminMaxUnackedIPDUsSend, shall be used.
At connection setup, the remote LLC may send,
using an XID frame, the maximum number of
unacknowledged I PDUs which it is prepared to
receive. If so, an implementation may choose to
override the administered maximum number of
unacknowledged PDUs with the dynamicly learned
value and should reflect this in the
llcCcOperMaxUnackedIPDUsSend object for the
connection component.rw INTEGER .1.3.6.1.3.51.1.3.1.1.8 |
llcCcAdminMaxUnackedIPDUsRcvThis object denotes the maximum number of
unacknowledged I PDUs that this LLC can expect
to receive from its remote LLC partner. This
count is referred to as 'k' in the IEEE 802.2
specification [??].
This object contains an administrative value
which will be applied the next time this
connection is established. A zero value for
this object indicates that the SAP default,
llcSapAdminMaxUnackedIPDUsRcv, shall be used.
At connection setup, an implementation may
choose to send this value to the remote LLC,
using an XID frame.rw INTEGER .1.3.6.1.3.51.1.3.1.1.9 |
llcCcAdminMaxRetransmitsThis object denotes the value for the maximum
number of times that this LLC shall retry PDUs
following the expiration of the acknowledgement
timer, the P-bit timer or the reject timer.
When these retries are exhausted, the link
shall be declared inactive. This count is
referred to as 'N2' in the IEEE 802.2
specification [??].
This object contains an administrative value
which will be applied the next time this
connection is established. A zero value for
this object indicates that the SAP default,
llcSapAdminMaxRetransmits, shall be used.rw INTEGER .1.3.6.1.3.51.1.3.1.1.10 |
llcCcAdminAckTimerThis object denotes the value for the time
interval during which this LLC shall expect to
receive either:
1) an acknowledgement to one or more
outstanding I PDUs. or 2) a response PDU to an
unnumbered command PDU.
The expiration of this timer shall cause the
frame unacknowledged frames to be retransmitted
(up to N2 times).
This object contains an administrative value
which will be applied the next time this
connection is established. A zero value for
this object indicates that the SAP default,
llcSapAdminAckTimer, shall be used.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.3.51.1.3.1.1.11 |
llcCcAdminPbitTimerThis object denotes the value for the time
interval during which this LLC shall expect to
receive a PDU with the F bit set to '1' in
response to a Type 2 command with the P bit set
to '1'.
The expiration of this timer shall cause the
REJ PDU to be retransmitted (up to N2 times).
This object contains an administrative value
which will be applied the next time this
connection is established. A zero value for
this object indicates that the SAP default,
llcSapAdminPbitTimer, shall be used.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.3.51.1.3.1.1.12 |
llcCcAdminRejTimerThis object denotes the value for the time
interval during which this LLC shall expect to
receive a reply to a REJ PDU.
The expiration of this timer shall cause the
REJ PDU to be retransmitted (up to N2 times).
This object contains an administrative value
which will be applied the next time this
connection is established. A zero value for
this object indicates that the SAP default,
llcSapAdminRejTimer, shall be used.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.3.51.1.3.1.1.13 |
llcCcAdminBusyTimerThis object denotes the value for the time
interval during which this LLC shall expect to
receive an indication that a busy condition at
the remote LLC has cleared.
The expiration of this timer shall cause the
link to be declared inactive.
This object contains an administrative value
which will be applied the next time this
connection is established. A zero value for
this object indicates that the SAP default,
llcSapAdminBusyTimer, shall be used.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.3.51.1.3.1.1.14 |
llcCcAdminInactTimerThis object denotes the value for the time
interval during which this LLC shall expect to
receive any PDU from the remote LLC. This
function is not described in the IEEE 802.2
specification [??] but is widely implemented.
The expiration of this timer shall cause the
local LLC to send a PDU to the remote LLC with
the P bit set to '1'.
This object contains an administrative value
which will be applied the next time this
connection is established. A zero value for
this object indicates that the SAP default,
llcSapAdminInactTimer, shall be used.
Any value for this object less than or equal to
the acknowledgement timer shall mean that the
timer is not used.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.3.51.1.3.1.1.15 |
llcCcAdminDelayAckCountThis object denotes the value for the maximum
number of consequetive I PDUs which this LLC
shall receive during the interval defined by
llcCcOperDelayTimer without sending an
immediate acknowledgement. This must be less
than or equal to the value of
llcCcOperMaxUnackIPDURcv. This function is not
described in the IEEE 802.2 specification [??]
but is widely implemented.
This object contains an administrative value
which will be applied the next time this
connection is established. A zero value for
this object indicates that the SAP default,
llcSapAdminDelayAck, shall be used.
A value of one indicates that acknowledgments
will be sent immediately and that the value of
llcCcAdminDelayAckTimer shall be ignored.rw INTEGER .1.3.6.1.3.51.1.3.1.1.16 |
llcCcAdminDelayAckTimerThis object denotes the value for the time
interval during which this LLC shall delay
acknowledgment of one or more I PDUs (up to the
value of llcCcOperDelayAckCount). This function
is not described in the IEEE 802.2
specification [??] but is widely implemented.
The expiration of this timer shall cause the
local LLC to acknowledge all unacknowledged I
PDUs.
This object contains an administrative value
which will be applied the next time this
connection is established.
This object is associated with the
llcCcAdminDelayAckCount object and is only
defined if that object has a value greater than
one.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.3.51.1.3.1.1.17 |
llcCcAdminRowStatusThis object is used by a management station to
create or delete the row entry in
llcCcAdminTable following the RowStatus textual
convention.
Upon successful creation of the row, an agent
automatically creates a corresponding entry in
the llcCcOperTable with llcCcOperState equal to
'discontacted (1)'.rw RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } .1.3.6.1.3.51.1.3.1.1.18 |
llcCcOperTableThis table contains current LLC link
parameters. Many of these objects have
corresponding objects in the
llcCcAdminTable. SEQUENCE OF LlcCcOperEntry .1.3.6.1.3.51.1.3.2 |
llcCcOperEntryA list of status and control values for an
LLC link station. LlcCcOperEntry .1.3.6.1.3.51.1.3.2.1 |
llcCcOperRoleThis object reflects the current role that the link
station is assuming.ro Enumeration .1.3.6.1.3.51.1.3.2.1.1 |
llcCcOperStateThis object describes the operational state of
the LLC connection. The managed system shall
attempt to keep this value consistent with the
administered state, llcCcAdminStatero Enumeration .1.3.6.1.3.51.1.3.2.1.2 |
llcCcOperMaxIPDUOctetsSendThis object denotes the maximum I PDU size, in
octets, that this LLC SAP may send to its
remote connection component partner. This count
is referred to as 'N1' in the IEEE 802.2
specification [??].
At connection setup, the remote LLC may send,
using an XID frame, the maximum I PDU size
which it is prepared to receive. If so, an
implementation may choose to override the
administered maximum PDU size with the
dynamically learned value and should reflect
that in this object.
The I PDU size includes all octets in a frame,
excluding framing characters, the MAC header
and link link header.rw Integer32 .1.3.6.1.3.51.1.3.2.1.3 |
llcCcOperMaxIPDUOctetsRcvThis object denotes the maximum I PDU size,in
octets, that this LLC can expect to receive
from its remote LLC partner. This count is
referred to as 'N1' in the IEEE 802.2
specification [??]
The I PDU size includes all octets in a frame
with the exception of the framing characters,
the MAC header and the link header.rw Integer32 .1.3.6.1.3.51.1.3.2.1.4 |
llcCcOperMaxUnackedIPDUsSendThis object denotes the maximum consequetive
unacknowledged I PDU frames that this LLC may
send to its remote LLC partner. This count is
referred to as 'k' in the IEEE 802.2
specification [??].
At connection setup, the remote LLC may send,
using an XID frame, the maximum number of
unacknowledged I PDUs which it is prepared to
receive. If so, an implementation may choose to
override the administered maximum number of
unacknowledged PDUs with the dynamicly learned
value and should reflect that in this object.rw INTEGER .1.3.6.1.3.51.1.3.2.1.5 |
llcCcOperMaxUnackedIPDUsRcvThis object denotes the maximum number of
unacknowledged I PDUs that this LLC can expect
to receive from its remote LLC partner. This
count is referred to as 'k' in the IEEE 802.2
specification [??].rw INTEGER .1.3.6.1.3.51.1.3.2.1.6 |
llcCcOperMaxRetransmitsThis object denotes the value for the maximum
number of times that this LLC shall retry PDUs
following the expiration of the acknowledgement
timer, the P-bit timer or the reject timer.
When these retries are exhausted, the link
shall be declared inactive. This count is
referred to as 'N2' in the IEEE 802.2
specification [??].rw INTEGER .1.3.6.1.3.51.1.3.2.1.7 |
llcCcOperAckTimerThis object denotes the value for the time
interval during which this LLC shall expect to
receive either:
1) an acknowledgement to one or more
outstanding I PDUs. or 2) a response PDU to an
unnumbered command PDU.
The expiration of this timer shall cause the
frame unacknowledged frames to be retransmitted
(up to N2 times).rw TimeTicks (SNMPv2-SMI) .1.3.6.1.3.51.1.3.2.1.8 |
llcCcOperPbitTimerThis object denotes the value for the time
interval during which this LLC shall expect to
receive a PDU with the F bit set to '1' in
response to a Type 2 command with the P bit set
to '1'.
The expiration of this timer shall cause the
REJ PDU to be retransmitted (up to N2 times).rw TimeTicks (SNMPv2-SMI) .1.3.6.1.3.51.1.3.2.1.9 |
llcCcOperRejTimerThis object denotes the value for the time
interval during which this LLC shall expect to
receive a reply to a REJ PDU.
The expiration of this timer shall cause the
REJ PDU to be retransmitted (up to N2 times).rw TimeTicks (SNMPv2-SMI) .1.3.6.1.3.51.1.3.2.1.10 |
llcCcOperBusyTimerThis object denotes the value for the time
interval during which this LLC shall expect to
receive an indication that a busy condition at
the remote LLC has cleared.
The expiration of this timer shall cause the
link to be declared inactive.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.3.51.1.3.2.1.11 |
llcCcOperInactTimerThis object denotes the value for the time
interval during which this LLC shall expect to
receive any PDU from the remote LLC. This
function is not described in the IEEE 802.2
specification [??] but is widely implemented.
The expiration of this timer shall cause the
local LLC to send a PDU to the remote LLC with
the P bit set to '1'.
Any value for this object less than or equal to
the acknowledgement timer shall mean that the
timer is not used.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.3.51.1.3.2.1.12 |
llcCcOperDelayAckCountThis object denotes the value for the maximum
number of consequetive I PDUs which this LLC
shall receive during the interval defined by
llcCcOperDelayTimer without sending an
immediate acknowledgement. This must be less
than or equal to the value of
llcCcOperMaxUnackIPDURcv. This function is not
described in the IEEE 802.2 specification [??]
but is widely implemented.
A value of one indicates that acknowledgments
will be sent immediately and that the value of
llcCcOperDelayAckTimer should be ignored.rw INTEGER .1.3.6.1.3.51.1.3.2.1.13 |
llcCcOperDelayAckTimerThis object denotes the value for the time
interval during which this LLC shall delay
acknowledgment of one or more I PDUs (up to the
value of llcCcOperDelayAckCount). This function
is not described in the IEEE 802.2
specification [??] but is widely implemented.
The expiration of this timer shall cause the
local LLC to acknowledge all unacknowledged I
PDUs.
This object is associated with the
llcCcOperDelayAckCount object and only has
meaning if that object has a value greater than
one.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.3.51.1.3.2.1.14 |
llcCcOperCreateTimeThis object describes the value of sysUpTime
when this connection was created.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.3.51.1.3.2.1.15 |
llcCcOperLastModifyTimeThis object describes the value of sysUpTime
when this connection definition was last
modified. If the connection has not been
modified, then this value shall be zero.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.3.51.1.3.2.1.16 |
llcCcOperLastFailTimeThis object describes the value of sysUpTime
when this LLC link station last failed. If
the link station has not failed, then this
value shall be zero.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.3.51.1.3.2.1.17 |
llcCcOperLastFailCauseThis enumerated object reflects the cause of the
last failure of this LLC link station. If the link
station has not failed, then this object will have
a value of undefined(1).ro Enumeration .1.3.6.1.3.51.1.3.2.1.18 |
llcCcOperLastFailFRMRInfoThis object reflects the information field of the
FRMR frame if the last failure for this LLC link
station was as a result of an invalid frame.
Otherwise, this field has no meaning.ro OCTET STRING .1.3.6.1.3.51.1.3.2.1.19 |
llcCcStatsTableEach entry in this table contains statistics
for a specific LLC link station. SEQUENCE OF LlcCcStatsEntry .1.3.6.1.3.51.1.3.3 |
llcCcStatsEntryA list of statistics for an LLC link station. LlcCcStatsEntry .1.3.6.1.3.51.1.3.3.1 |
llcCcStatsLocalBusiesThis object reflects the total number of times
that the local LLC link station has entered a
busy state (RNR) since link station startup.
At link station startup time, this object must
be initialized to zero.ro Counter32 .1.3.6.1.3.51.1.3.3.1.1 |
llcCcStatsRemoteBusiesThis object reflects the total number of times
that an adjacent ( remote) LLC link station
has entered a busy state (RNR) since link
station startup. At link station startup time,
this object must be initialized to zero.ro Counter32 .1.3.6.1.3.51.1.3.3.1.2 |
llcCcStatsIFramesInThis object reflects the total I-frames
received from an adjacent LLC link station
since link station startup. At link station
startup time, this object must be initialized
to zero.ro Counter32 .1.3.6.1.3.51.1.3.3.1.3 |
llcCcStatsIFramesOutThis object reflects the total I-frames
transmitted to an adjacent LLC link station
since link station startup. At link station
startup time, this object must be initialized
to zero.ro Counter32 .1.3.6.1.3.51.1.3.3.1.4 |
llcCcStatsIOctetsInThis object reflects the total octets
contained in I-frames received from an adjacent
LLC link station since link station startup.
At link station startup time, this object must
be initialized to zero.ro Counter32 .1.3.6.1.3.51.1.3.3.1.5 |
llcCcStatsIOctetsOutThis object reflects the total octets
contained in I-frames transmitted to an
adjacent LLC link station since link station
startup. At link station startup time,
this object must be initialized to zero.ro Counter32 .1.3.6.1.3.51.1.3.3.1.6 |
llcCcStatsREJsInThis object reflects the total REJ frames
received from an adjacent LLC link station
since link station startup.ro Counter32 .1.3.6.1.3.51.1.3.3.1.7 |
llcCcStatsREJsOutThis object reflects the total REJ frames
transmitted to an adjacent LLC link station
since link station startup.ro Counter32 .1.3.6.1.3.51.1.3.3.1.8 |
llcCcStatsRetransmitsInThis object reflects the total number of information
frames retransmitted by the remote link station
because the N(s) received from that link station
indicated that one or more information frames
sent by that station were lost. This event
causes the first missing information frame of a
window and all subsequent information frames to
be retransmitted. At link station startup time,
this object must be initialized to zeroro Counter32 .1.3.6.1.3.51.1.3.3.1.9 |
llcCcStatsRetransmitsOutThis object reflects the total number of
information frames retransmitted to a remote
link station because the N(r) received from
that link station indicated that one or more
information frames sent to that station were
lost. This event causes the first missing
information frame of a window and all
subsequent information frames to be
retransmitted. At link station startup time,
this object must be initialized to zero.ro Counter32 .1.3.6.1.3.51.1.3.3.1.10 |
llcCcStatsFRMRsInThis object reflects the total frame reject
(FRMR) frames received from an adjacent LLC
link station since link station startup.ro Counter32 .1.3.6.1.3.51.1.3.3.1.11 |
llcCcStatsFRMRsOutThis object reflects the total frame reject
(FRMR) frames transmitted to an adjacent LLC
link station since link station startup.ro Counter32 .1.3.6.1.3.51.1.3.3.1.12 |
llcCcStatsDISCsInThis object reflects the total number of
disconnect (DISC) requests received from an
adjacent link station since link station
startup. At link station startup time, this
object must be initialized to zero.ro Counter32 .1.3.6.1.3.51.1.3.3.1.13 |
llcCcStatsDISCsOutThis object reflects the total number of
disconnect (DISC) requests transmited to an
adjacent link station since link station
startup. At link station startup time, this
object must be initialized to zero.ro Counter32 .1.3.6.1.3.51.1.3.3.1.14 |
llcCcStatsUAsInThis object reflects the total number of
unnumbered acknowledgements (UA) requests
received from an adjacent link station
since link station startup. At link station
startup time, this object must be initialized
to zero.ro Counter32 .1.3.6.1.3.51.1.3.3.1.15 |
llcCcStatsUAsOutThis object reflects the total number of
unnumbered acknowledgements (UA) requests
transmited to an adjacent link station
since link station startup. At link station
startup time, this object must be initialized
to zero.ro Counter32 .1.3.6.1.3.51.1.3.3.1.16 |
llcCcStatsDMsInThis object reflects the total number of
disconnect mode (DM) requests received from an
adjacent link station since link station
startup. At link station startup time, this
object must be initialized to zero.ro Counter32 .1.3.6.1.3.51.1.3.3.1.17 |
llcCcStatsDMsOutThis object reflects the total number of
disconnect mode (DM) requests transmited to an
adjacent link station since link station
startup. At link station startup time, this
object must be initialized to zero.ro Counter32 .1.3.6.1.3.51.1.3.3.1.18 |
llcCcStatsSABMEsInThis object reflects the total number of
set normal response mode (SABME) requests
received from an adjacent link station
since link station startup. At link station
startup time, this object must be initialized
to zero.ro Counter32 .1.3.6.1.3.51.1.3.3.1.19 |
llcCcStatsSABMEsOutThis object reflects the total number of
set normal response mode (SABME) requests
transmited to an adjacent link station
since link station startup. At link station
startup time, this object must be initialized
to zero.ro Counter32 .1.3.6.1.3.51.1.3.3.1.20 |
llcCcStatsProtocolErrsThis object reflects the total occurrences,
since link station startup, where this LLC
link station has inactivated the link as a
result of receiving a frame from its adjacent
link station which was in violation of the
protocol. At link station startup time, this
object must be initialized to zero.ro Counter32 .1.3.6.1.3.51.1.3.3.1.21 |
llcCcStatsActivityTOsThis object reflects the total occurrences,
since startup, where this LLC link station has
inactivated the link as a result of no activity
on the link. At link station startup time,
this object must be initialized to zero.ro Counter32 .1.3.6.1.3.51.1.3.3.1.22 |
llcCcStatsRetriesExpsThis object reflects the total occurrences,
since startup, where this LLC link station has
inactivated the link as a result of a retry
sequence being exhausted. At link station
startup time, this object must be initialized
to zero.ro Counter32 .1.3.6.1.3.51.1.3.3.1.23 |
llcTraps OBJECT IDENTIFIER .1.3.6.1.3.51.1.4 |
llcPortStatusChangeThis trap indicates that the state of an LLC port
has transitioned to active or inactive. TRAP-TYPE .1.3.6.1.3.51.1.4.0.1 |
llcCcStatusChangeThis trap indicates that the state of an LLC link
station has transitioned to contacted or
discontacted. TRAP-TYPE .1.3.6.1.3.51.1.4.0.2 |
llcConformance OBJECT IDENTIFIER .1.3.6.1.3.51.1.5 |
llcCompliances OBJECT IDENTIFIER .1.3.6.1.3.51.1.5.1 |
llcCoreCompliance OBJECT IDENTIFIER .1.3.6.1.3.51.1.5.1.1 |
llcGroups OBJECT IDENTIFIER .1.3.6.1.3.51.1.5.2 |
llcCoreGroups OBJECT IDENTIFIER .1.3.6.1.3.51.1.5.2.1 |
llcCorePortAdminGroup OBJECT IDENTIFIER .1.3.6.1.3.51.1.5.2.1.1 |
llcCorePortOperGroup OBJECT IDENTIFIER .1.3.6.1.3.51.1.5.2.1.2 |
llcCorePortStatsGroup OBJECT IDENTIFIER .1.3.6.1.3.51.1.5.2.1.3 |
llcCoreCcAdminGroup OBJECT IDENTIFIER .1.3.6.1.3.51.1.5.2.1.4 |
llcCoreCcOperGroup OBJECT IDENTIFIER .1.3.6.1.3.51.1.5.2.1.5 |
llcCoreCcStatsGroup OBJECT IDENTIFIER .1.3.6.1.3.51.1.5.2.1.6 |