DVB-CABLE-INA-MIB
AI MIB Summary
The DVB-CABLE-INA-MIB facilitates the SNMP-based monitoring and management of EuroModem-compliant In-Home Network Adapters (INAs) within DVB-Cable infrastructures by exposing standard MIB-II (RFC 1213) interface statistics and device operational states. This module enables the tracking of physical layer link status, interface traffic counters, and device availability for legacy cable modem termination systems.
The MIB modules for INAs that conform to the EuroModem specification. This MIB assumes the INA implements MIB-II RFC 1213
The original MIB definition work was carried out for the DVB-RC group by Bert Van Willigen Philips Research Laboratory Eindhoven, The Netherlands.
Main OID:
dvbIna.1.3.6.1.3.1.4
149
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
149 total| Object Name |
|---|
dvbDevice OBJECT IDENTIFIER .1.3.6.1.3.1 |
dvbInaThe MIB modules for INAs that
conform to the EuroModem specification. This
MIB assumes the INA implements MIB-II RFC 1213
The original MIB definition work was carried
out for the DVB-RC group by
Bert Van Willigen
Philips Research Laboratory Eindhoven,
The Netherlands. MODULE-IDENTITY .1.3.6.1.3.1.4 |
dvbInaMibObjects OBJECT IDENTIFIER .1.3.6.1.3.1.4.1 |
dvbInaDevice OBJECT IDENTIFIER .1.3.6.1.3.1.4.1.1 |
dvbInaDeviceDateTimeThe date and time, with optional timezone information.rw DateAndTime (SNMPv2-TC) .1.3.6.1.3.1.4.1.1.1 |
dvbInaDeviceResetNowSetting this object to true(1) causes the device to reset.
Reading this object always returns false(2).rw TruthValue (SNMPv2-TC) .1.3.6.1.3.1.4.1.1.2 |
dvbInaDeviceSerialNumberThe manufacturer's serial number for this device.ro DisplayString (SNMPv2-TC) .1.3.6.1.3.1.4.1.1.3 |
dvbInaDeviceUptimeThe amount of time since this device was last initialized.
Note that this is different from sysUpTime in MIB-II
because sysUpTime is the uptime of the network management
portion of the device.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.3.1.4.1.1.4 |
dvbInaDeviceCurrentStateCurrent (operational) state of the INA.ro Enumeration .1.3.6.1.3.1.4.1.1.5 |
dvbInaDeviceDesiredStateThe desired state of the INA. The following values are
possible: 'Standby(4)' and 'Operational(3)'rw Enumeration .1.3.6.1.3.1.4.1.1.6 |
dvbInaDeviceMibVersionThis string object specifies the MIB version number of this
MIB Default is '1.0'ro DisplayString (SNMPv2-TC) .1.3.6.1.3.1.4.1.1.7 |
dvbInaDeviceDhcpRelaySupportSpecifies whether the INA support DHCP relay.
If this parameter is true, the INA support DHCP relay.ro TruthValue (SNMPv2-TC) .1.3.6.1.3.1.4.1.1.8 |
dvbInaNmAccess OBJECT IDENTIFIER .1.3.6.1.3.1.4.1.2 |
dvbInaNmAccessTableThis table controls access to SNMP objects by network
management stations. If the table is empty, access
to SNMP objects is unrestricted. SEQUENCE OF DvbInaNmAccessEntry .1.3.6.1.3.1.4.1.2.1 |
dvbInaNmAccessEntryControls access to SNMP objects by a particular network
management station. For each entry in this table, the
contents are not readable unless the management station
has read-write permission. DvbInaNmAccessEntry .1.3.6.1.3.1.4.1.2.1.1 |
dvbInaNmAccessIndexIndex used to order the application of access entries. Integer32 .1.3.6.1.3.1.4.1.2.1.1.1 |
dvbInaNmAccessIpTypeSpecifies the format of the IP addressrw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.3.1.4.1.2.1.1.2 |
dvbInaNmAccessIpThe IP address (or subnet) of the network management
station. The address 255.255.255.255 is defined to mean
any NMS. If traps are enabled for this entry, then the
value must be the address of a specific device.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.3.1.4.1.2.1.1.3 |
dvbInaNmAccessIpMaskTypeSpecifies the format of the IP addressrw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.3.1.4.1.2.1.1.4 |
dvbInaNmAccessIpMaskThe IP subnet mask of the network management stations.
If traps are enabled for this entry, then the value must
be 255.255.255.255.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.3.1.4.1.2.1.1.5 |
dvbInaNmAccessCommunityThe community string to be matched for access by this
entry. If set to the null string then any community string
will match.rw DisplayString (SNMPv2-TC) .1.3.6.1.3.1.4.1.2.1.1.6 |
dvbInaNmAccessControlSpecifies the type of access allowed to this NMS. Setting
this object to none(1) causes the table entry to be
destroyed. Read(2) allows access by 'get' and 'get-next'
PDUs. ReadWrite(3) allows access by 'set' as well.
RoWithtraps(4), rwWithTraps(5), and trapsOnly(6)
control distribution of Trap PDUs transmitted by this
device.rw Enumeration .1.3.6.1.3.1.4.1.2.1.1.7 |
dvbInaNmAccessInterfacesSpecifies the set of interfaces from which requests from
this NMS will be accepted.
Each octet within the value of this object specifies a set
of eight interfaces, with the first octet specifying
interfaces 1 through 8, the second octet specifying
interfaces 9 through 16, etc. Within each octet, the most
significant bit represents the lowest numbered interface,
and the least significant bit represents the highest
numbered interface. Thus, each interface is represented by
a single bit within the value of this object. If that bit
has a value of '1' then that interface is included in the
set.
Note that entries in this table apply only to link-layer
interfaces (e.g., Ethernet and CATV MAC). Upstream and
downstream channel interfaces must not be specified.rw OCTET STRING ( SIZE(4) ) .1.3.6.1.3.1.4.1.2.1.1.8 |
dvbInaNmAccessStatusControls and reflects the status of rows in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.3.1.4.1.2.1.1.9 |
dvbInaNmAccessLevelEnableEach bit of this 16 bit unsigned object flags whether the
manager in question shall receive traps of the associated
priority level. Bit 0 specifies whether the manager shall
receive traps of level 1, bit 1 of level 2 etc.
Bit 0 is the least significant bit of this object.rw BITS .1.3.6.1.3.1.4.1.2.1.1.10 |
dvbInaSw OBJECT IDENTIFIER .1.3.6.1.3.1.4.1.3 |
dvbInaSwTftpServerAddrTypeFormat of IP address of the Tftp Serverrw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.3.1.4.1.3.1 |
dvbInaSwTftpServerCached IP address of the TFTP server for software
upgrades.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.3.1.4.1.3.2 |
dvbInaSwTftpFilenameFile name of file on TFTP server. In the case of a file
upload, this object contains the filename of the file on
the TFTP server. In the case of a file download this object
contains the path and file name of the file to be
downloaded on the TFTP server.rw DisplayString .1.3.6.1.3.1.4.1.3.3 |
dvbInaSwFilenameFile name of file on INA. In the case of a file upload,
this object contains the file on the INA to be uploaded.
In the case of a file download this object contains the
path and file name of the file on the INA.rw DisplayString .1.3.6.1.3.1.4.1.3.4 |
dvbInaSwAdminStatusRequest software download or upload. The following values
can be set: 'InitImageDownLoad(1)', 'InitImageUpLoad(1)',
'InitFileDownLoad(1)', 'InitFileUpLoad(1)' and 'Idle(8)'.
Default value of this parameter is 'Idle(8)'. As long as
a file or image transfer is in progress its value is equal
to the value set, otherwise 'Idle(8)'.rw Enumeration .1.3.6.1.3.1.4.1.3.5 |
dvbInaSwOperStatusIndicates actual status of TFTP download. This object can
have one of the following states:
'InitImageDownload(1)',
'ContactingTFTPServer(2)',
'DownloadInprogress(3)',
'Failure(4)',
'DownloadSuccessful(5)',
'Idle(6)',
'InitImageUpLoad(7)',
'ImageDownload(8)',
'InitFileDownLoad(9)',
'InitFileUpLoad(10)',
'UploadInprogress(11)'
and 'UploadSuccessful(12)'.
After reset the state is 'Idle(6)'.ro Enumeration .1.3.6.1.3.1.4.1.3.6 |
dvbInaSwDownLoadSlotThis identifies the image slot in which the image is to be
downloaded. Slot 0 is a special case that is used to
identify a direct to RAM download. This can be used e.g.
for diagnostics or debugging purposes.
By default this object will point to the first empty slot.
If there are no empty slots, it will point to the first
backup image.rw Integer32 .1.3.6.1.3.1.4.1.3.7 |
dvbInaSwVersTableThis table contains a number of entries i.e. slots.
Each slot can contain an image and information
about the image. SEQUENCE OF DvbInaSwVersEntry .1.3.6.1.3.1.4.1.3.8 |
dvbInaSwVersEntry DvbInaSwVersEntry .1.3.6.1.3.1.4.1.3.8.1 |
dvbInaSwIndexThis 32-bit integer is the current index of this entry. Integer32 .1.3.6.1.3.1.4.1.3.8.1.1 |
dvbInaSwSlotThis is the image slot number of this entry. Slot 0 is
reserved for RAM, it is used to identify an image directly
loaded into RAM e.g. for debugging purposes.ro Integer32 .1.3.6.1.3.1.4.1.3.8.1.2 |
dvbInaSwVersionThe version of the software loaded in this slot. This is a
manufacturer dependent string.ro DisplayString (SNMPv2-TC) .1.3.6.1.3.1.4.1.3.8.1.3 |
dvbInaSwStateThe execution state of the image in this slot.
The following states are possible:
'Executing(1)', 'Failed(2)' or 'None(3)'.ro Enumeration .1.3.6.1.3.1.4.1.3.8.1.4 |
dvbInaSwActionThis identifies the image to be used during boot.
The following actions are possible:
'Boot(1)', 'Backup(2)', 'None(3)' and 'EmptySlot(4)'.ro Enumeration .1.3.6.1.3.1.4.1.3.8.1.5 |
dvbInaSwDateTimeThis specifies the date and time the image was loaded
in this slot.
This identifies the image to be used during boot.ro DateAndTime (SNMPv2-TC) .1.3.6.1.3.1.4.1.3.8.1.6 |
dvbInaDhcp OBJECT IDENTIFIER .1.3.6.1.3.1.4.1.4 |
dvbInaDhcpServerTableServer table contains the DHCP/BOOTP servers used by this
INA. SEQUENCE OF DvbInaDhcpServerEntry .1.3.6.1.3.1.4.1.4.1 |
dvbInaDhcpServerEntryServer table is indexed through the ifIndex and the
IP address of the BOOTP or DHCP server in question. DvbInaDhcpServerEntry .1.3.6.1.3.1.4.1.4.1.1 |
dvbInaDhcpServerIfIndexThis object contains the ifIndex of the interface via
which the DHCP server is communicating with the INA. InterfaceIndexOrZero (IF-MIB) .1.3.6.1.3.1.4.1.4.1.1.1 |
dvbInaDhcpServerIpTypeSpecifies the format of the IP Address InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.3.1.4.1.4.1.1.2 |
dvbInaDhcpServerIpThe IP address of this DHCP server. In the case the IP
address is the all ones address, the DHCP message will
be broadcast on the connected IP network. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.3.1.4.1.4.1.1.3 |
dvbInaDhcpServerRowAccessStatusControls and reflects the status of this row in
this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.3.1.4.1.4.1.1.4 |
dvbInaDhcpServerRelayEnableThis object enables or disables the INA to relay the DHCP
message to this DHCP server.rw TruthValue (SNMPv2-TC) .1.3.6.1.3.1.4.1.4.1.1.5 |
dvbInaDhcpServerAssociationThis object defines the server association either
ina/niu/client.
It is optional to support the ina value.rw Enumeration .1.3.6.1.3.1.4.1.4.1.1.6 |
dvbInaDhcpServerPrimaryOrSecondaryThis object defines the Primary/Secondary server
association.rw Enumeration .1.3.6.1.3.1.4.1.4.1.1.7 |
dvbInaEvent OBJECT IDENTIFIER .1.3.6.1.3.1.4.1.5 |
dvbInaEvControlSetting this object to resetLog(1) empties the event log.
All data is deleted. Setting it to useDefaultReporting(2)
returns all event priorities to their factory-default
reporting. Reading this object always returns
useDefaultReporting(2).rw Enumeration .1.3.6.1.3.1.4.1.5.1 |
dvbInaEvSyslogIpTypeThe IP address type of the SysLog server.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.3.1.4.1.5.2 |
dvbInaEvSyslogIpThe IP address of the Syslog server. If 0.0.0.0, syslog
transmission is inhibited.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.3.1.4.1.5.3 |
dvbInaEvThrottleAdminStatusControls the transmission of traps and syslog messages
with respect to the trap pacing threshold.
unconstrained(1) causes traps and syslog messages to be
transmitted without regard to the threshold settings.
maintainBelowThreshold(2) causes trap transmission and
syslog messages to be suppressed if the number of traps
would otherwise exceed the threshold.
stopAtThreshold(3) causes trap transmission to cease
at the threshold, and not resume until directed to do so.
inhibited(4) causes all trap transmission and syslog
messages to be suppressed.
A single event is always treated as a single event for
threshold counting. That is, an event causing both a trap
and a syslog message is still treated as a single event.
Writing to this object resets the thresholding state.
At initial startup, this object has a default value of
unconstrained(1).rw Enumeration .1.3.6.1.3.1.4.1.5.4 |
dvbInaEvThrottleInhibitedIf true(1), trap and syslog transmission is currently
inhibited due to thresholds and/or the current setting of
dvbInaEvThrottleAdminStatus. In addition, this is set to
true(1) if transmission is inhibited due to no
syslog (dvbInaEvSyslogIp) or trap (dvbInaNmAccessEntry)
destinations having been set.ro TruthValue (SNMPv2-TC) .1.3.6.1.3.1.4.1.5.5 |
dvbInaEvThrottleThresholdNumber of trap/syslog events per dvbInaEvThrottleInterval
to be transmitted before throttling.
A single event is always treated as a single event for
threshold counting. That is, an event causing both a trap
and a syslog message is still treated as a single event.
At initial startup, this object returns 0.rw Unsigned32 .1.3.6.1.3.1.4.1.5.6 |
dvbInaEvThrottleIntervalThe interval over which the trap threshold applies.
At initial startup, this object has a value of 1.rw Integer32 ( 1..2147483647 ) UNITS "seconds" .1.3.6.1.3.1.4.1.5.7 |
dvbInaEvControlTableThe Event Control Table allows configuration of the
reporting mechanisms used for a particular event
priority. The event priority level indexes the table SEQUENCE OF DvbInaEvControlEntry .1.3.6.1.3.1.4.1.5.9 |
dvbInaEvControlEntryAllows configuration of the reporting mechanisms for a
particular event priority. DvbInaEvControlEntry .1.3.6.1.3.1.4.1.5.9.1 |
dvbInaEvPriorityThe priority level that is controlled by this entry. Enumeration .1.3.6.1.3.1.4.1.5.9.1.1 |
dvbInaEvReportingDefines the action to be taken on occurrence of this
event class. If the local(0) bit is set, then log to the
internal log, if the traps(1) bit is set, then generate
a trap, if the syslog(2) bit is set, then send a syslog
message.rw Bits .1.3.6.1.3.1.4.1.5.9.1.2 |
dvbInaEvTableThe Event Table contains a log of network and device
events. The table is indexed by an arbitrary integer. SEQUENCE OF DvbInaEvEntry .1.3.6.1.3.1.4.1.5.10 |
dvbInaEvEntryDescribes a network or device event that may be of
interest in fault isolation and troubleshooting. DvbInaEvEntry .1.3.6.1.3.1.4.1.5.10.1 |
dvbInaEvIndexProvides relative ordering of the objects in the event
log. This object will always increase except when
(a) the log is reset via dvbInaEvControl,
(b) the device reboots and does not implement nonvolatile
storage for this log, or (c) it reaches the value 2^31.
The next entry for all the above cases is 1. Integer32 .1.3.6.1.3.1.4.1.5.10.1.1 |
dvbInaEvFirstTimeThe time that this entry was created.ro DateAndTime (SNMPv2-TC) .1.3.6.1.3.1.4.1.5.10.1.2 |
dvbInaEvLastTimeIf multiple events are reported via the same entry, the
time that the last event for this entry occurred.ro DateAndTime (SNMPv2-TC) .1.3.6.1.3.1.4.1.5.10.1.3 |
dvbInaEvCountThe number of consecutive event instances reported by
this entry.ro Counter32 .1.3.6.1.3.1.4.1.5.10.1.4 |
dvbInaEvLevelThe priority level of this event as defined by the
vendor.ro Integer32 .1.3.6.1.3.1.4.1.5.10.1.5 |
dvbInaEvIdFor this product, uniquely identifies the type of event
that is reported by this entry.ro Unsigned32 .1.3.6.1.3.1.4.1.5.10.1.6 |
dvbInaEvTextProvides a human-readable description of the event.ro DisplayString (SNMPv2-TC) .1.3.6.1.3.1.4.1.5.10.1.7 |
dvbInaEvMaxNumberOfEntriesDescribes the maximum number of entries that can be
contained in the Event tablerw Integer32 .1.3.6.1.3.1.4.1.5.11 |
dvbInaIpFilter OBJECT IDENTIFIER .1.3.6.1.3.1.4.1.6 |
dvbInaIpFilterEnableThis controls the IP filter table. This object can be set
to the following values:
'enable(1)': Enables the IP filter table.
'enableAuto(2)': Enables the IP filter table with automatic
IP anti-spoofing population by sniffing DHCP messages.
'countHits(3)': This option is used to debug the filter
table. It allows packets to be checked against the filter
table and increments dvbInaIpFilterMaches for a matching
filter. However, all packets are allowed through.
'disabled(4)': Disables IP filtering, all packets are
allowed through.rw Enumeration .1.3.6.1.3.1.4.1.6.1 |
dvbInaIpFilterTableThe IP Filter Table describes a filter to apply to IP
traffic as received on a specified interface. Both source
and destination addresses must match for the filter to
apply. To create an entry in this table,
dvbInaIpFilterIndex must be specified. Filter application
is ordered by the filter index. SEQUENCE OF DvbInaIpFilterEntry .1.3.6.1.3.1.4.1.6.2 |
dvbInaIpFilterEntryDescribes a filter to apply to IP traffic received on a
specified interface. Both source and destination
addresses must match for the filter to apply. DvbInaIpFilterEntry .1.3.6.1.3.1.4.1.6.2.1 |
dvbInaIpFilterIndexIndex used to order the application of filters.
The filter with the lowest index is always applied
first. Integer32 .1.3.6.1.3.1.4.1.6.2.1.1 |
dvbInaIpFilterStatusControls and reflects the status of rows in this table.
The filter is not applied until this object is set to
(or changes to) active.rw RowStatus (SNMPv2-TC) .1.3.6.1.3.1.4.1.6.2.1.2 |
dvbInaIpFilterAssignedByThis object identifies what created this entry and is
automatically set when a filter is created. This object
shall have one of the following values: 'dhcp(1)',
'static(2)' and 'snmp(3)'.rw Enumeration .1.3.6.1.3.1.4.1.6.2.1.3 |
dvbInaIpFilterIfIndexThe entry interface to which this filter applies. The
value corresponds to ifIndex for either a CATV MAC or
another network interface.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.3.1.4.1.6.2.1.4 |
dvbInaIpFilterDirectionDetermines whether the filter is applied to inbound(1)
traffic, outbound(2) traffic, or traffic in both(3)
directions.rw Enumeration .1.3.6.1.3.1.4.1.6.2.1.5 |
dvbInaIpFilterTosThis is the value to be matched to the packet's TOS
(Type of Service) value (after the TOS value is AND'd
with dvbInaIpFilterTosMask).rw OCTET STRING ( SIZE (1)) .1.3.6.1.3.1.4.1.6.2.1.6 |
dvbInaIpFilterTosMaskThe mask to be applied to the packet's TOS value before
matching.rw OCTET STRING ( SIZE (1)) .1.3.6.1.3.1.4.1.6.2.1.7 |
dvbInaIpFilterSrcAddrTypeThe type of the source IP address.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.3.1.4.1.6.2.1.8 |
dvbInaIpFilterSrcAddrThe source IP address, or portion thereof, that is to be
matched for this filter.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.3.1.4.1.6.2.1.9 |
dvbInaIpFilterSrcMaskTypeThe type of the source mask IP address.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.3.1.4.1.6.2.1.10 |
dvbInaIpFilterSrcMaskA bit mask that is to be applied to the source address
prior to matching. This mask is not necessarily the same
as a subnet mask, but 1's bits must be leftmost and
contiguous.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.3.1.4.1.6.2.1.11 |
dvbInaIpFilterDstAddrTypeThe type of the destination IP address.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.3.1.4.1.6.2.1.12 |
dvbInaIpFilterDstAddrThe destination IP address, or portion thereof, that is
to be matched for this filter.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.3.1.4.1.6.2.1.13 |
dvbInaIpFilterDstMaskTypeThe type of the destination mask IP address.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.3.1.4.1.6.2.1.14 |
dvbInaIpFilterDstMaskA bit mask that is to be applied to the destination
address prior to matching. This mask is not necessarily
the same as a subnet mask, but 1's bits must be leftmost
and contiguousrw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.3.1.4.1.6.2.1.15 |
dvbInaIpFilterProtocolThe IP protocol value that is to be matched. For
example: icmp is 1, tcp is 6, udp is 17. A value of
256 matches ANY protocol.rw Enumeration .1.3.6.1.3.1.4.1.6.2.1.16 |
dvbInaIpFilterSourcePortLowIf dvbInaIpFilterProtocol is udp or tcp, this is the
inclusive lower bound of the transport-layer source
port range that is to be matched.rw Integer32 .1.3.6.1.3.1.4.1.6.2.1.17 |
dvbInaIpFilterSourcePortHighIf dvbInaIpFilterProtocol is udp or tcp, this is the
inclusive upper bound of the transport-layer source
port range that is to be matched.rw Integer32 .1.3.6.1.3.1.4.1.6.2.1.18 |
dvbInaIpFilterDestPortLowIf dvbInaIpFilterProtocol is udp or tcp, this is the
inclusive lower bound of the transport-layer
destination port range that is to be matched.rw Integer32 .1.3.6.1.3.1.4.1.6.2.1.19 |
dvbInaIpFilterDestPortHighIf dvbInaIpFilterProtocol is udp or tcp, this is the
inclusive upper bound of the transport-layer
destination port range that is to be matched.rw Integer32 .1.3.6.1.3.1.4.1.6.2.1.20 |
dvbInaIpFilterActiondiscard(1) : Discard all packets matching this filter.
accept(2) : Accept packet for further processing.
If dvbInaIpFilterContinue is set to true,
see if there are other matches, otherwise
done.
tosmap(3) : Change the TOS in the IP packet according to
the specification in the TOS MAP table.
If the TOS MAP index is 0 or no entry is
found in the TOS MAP table. Otherwise treat as
accept.
If dvbInaIpFilterContinue is set to true,
see if there are other matches, otherwise
done.rw Enumeration .1.3.6.1.3.1.4.1.6.2.1.21 |
dvbInaIpFilterMatchesCounts the number of times this filter was matched.ro Counter32 .1.3.6.1.3.1.4.1.6.2.1.22 |
dvbInaIpFilterContinueIf this value is set to true(1), and
dvbInaIpFilterControl is anything but discard(1),
continue test of next filter rows and applying actions.rw TruthValue (SNMPv2-TC) .1.3.6.1.3.1.4.1.6.2.1.23 |
dvbInaIpFilterTosMapIndexThis object points to an entry in dvbInaIpTosMapTable.
If dvbInaIpFilterControl is set to tosmap(3), do the
TOS mapping in dvbInaIpTosMapTable with this index.
If no matching TOS map index exists, treat as if
dvbInaIpFilterControl were set to accept(1).
If this object is set ot the value of 0, there is no
matching TOS map.rw Integer32 .1.3.6.1.3.1.4.1.6.2.1.24 |
dvbInaIpTosMapTableA table which specifies a TOS change.
dvbInaIpFilterTosMapIndex points to a specific row in this
table that specifies a TOS change.
This table applies only to the TOS within the IP header.
Index 0 is reserved. SEQUENCE OF DvbInaIpTosMapEntry .1.3.6.1.3.1.4.1.6.3 |
dvbInaIpTosMapEntryTable used to describe Type of Service (TOS) bits
processing.
If the action in a filter row in dvbInaIpFilterTable is
tosmap and dvbInaIpFilterTosMapIndex points on a row in this
table, then the Type of Service bits in the IP header of the
matched packet is manipulated as follows:
Set the tosBits of the packet to
(tosBits & dvbInaIpTosMapAndMask) | dvbInaIpTosMapOrMask
This construct allows you to do a clear and set of all
the TOS bits in a flexible manner. DvbInaIpTosMapEntry .1.3.6.1.3.1.4.1.6.3.1 |
dvbInaIpTosMapIndexThe index for this row. Integer32 .1.3.6.1.3.1.4.1.6.3.1.1 |
dvbInaIpTosMapStatusThe object used to create and delete entries in this
table. A row created by specifying just this object
results in a row which specifies no change to the TOS
bits. A row may be created using either the create-and-go
or create-and-wait paradigms. There is no restriction on
the ability to change values in this row while the row is
active.rw RowStatus (SNMPv2-TC) .1.3.6.1.3.1.4.1.6.3.1.2 |
dvbInaIpTosMapAndMaskThis value is bitwise AND'd with the matched packet's
TOS bits.rw OCTET STRING .1.3.6.1.3.1.4.1.6.3.1.3 |
dvbInaIpTosMapOrMaskAfter bitwise AND'ing with the above bits, the packet's
TOS bits are bitwise OR'd with these bits.rw OCTET STRING .1.3.6.1.3.1.4.1.6.3.1.4 |
dvbInaEthFilter OBJECT IDENTIFIER .1.3.6.1.3.1.4.1.7 |
dvbInaEthFilterEnableThis contols the Ethernet filter table. This object
can be set to the following values:
'enable(1)': Enables the Ethernet filter table.
'countHits(2)': This option is used to debug the
filter table. It allows packets to be checked against
the filter table and increments dvbInaEthFilterMaches
for a matching filter. However, all packets are allowed
through.
'disabled(3)': Disables Ethernet filtering, all packets
are allowed through.rw Enumeration .1.3.6.1.3.1.4.1.7.1 |
dvbInaEthFilterTableThe Ethernet Filter Table describes a filter to apply
to Ethernet traffic as received on a specified interface.
To create an entry in this table,
dvbInaEthFilterIndex must be specified. Filter
application only relates to Ethernet Port Number SEQUENCE OF DvbInaEthFilterEntry .1.3.6.1.3.1.4.1.7.2 |
dvbInaEthFilterEntryDescribes a filter to apply to Ethernet traffic received
on a specified interface. Traffic is filtered only on
ethernet port addresses. DvbInaEthFilterEntry .1.3.6.1.3.1.4.1.7.2.1 |
dvbInaEthFilterIndexIndex used to order the application of filters.
The filter with the lowest index is always applied
first. Integer32 .1.3.6.1.3.1.4.1.7.2.1.1 |
dvbInaEthFilterStatusControls and reflects the status of rows in this table.
The filter is not applied until this object is set to
(or changes to) active.rw RowStatus (SNMPv2-TC) .1.3.6.1.3.1.4.1.7.2.1.2 |
dvbInaEthFilterIfIndexThe ifIndex of the interface to which this filter
applies.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.3.1.4.1.7.2.1.3 |
dvbInaEthFilterEtherTypeThe format of the Ethernet of the ethernet frame
to which this filter is applicablerw Enumeration .1.3.6.1.3.1.4.1.7.2.1.4 |
dvbInaEthFilterProtocolThe protocol to filter on.rw Integer32 ( 0..65535 ) .1.3.6.1.3.1.4.1.7.2.1.5 |
dvbInaEthFilterActionThe action to be taken when there is a filter match.
This object shall have one the following values:
'accept(1)' or 'discard(2)'.rw Enumeration .1.3.6.1.3.1.4.1.7.2.1.6 |
dvbInaEthFilterMatchesCounts the number of times this filter was matched.ro Counter32 .1.3.6.1.3.1.4.1.7.2.1.7 |
dvbInaNiuError OBJECT IDENTIFIER .1.3.6.1.3.1.4.1.8 |
dvbInaNiuErrorResetIf true the NIU error table is cleared.
If read it always returns false.rw TruthValue (SNMPv2-TC) .1.3.6.1.3.1.4.1.8.1 |
dvbInaNiuErrorMaxTableSizeThe maximum size of the NIU error table.rw Integer32 ( 1..65535 ) .1.3.6.1.3.1.4.1.8.2 |
dvbInaNiuErrorStatReqIntervalThe Status Request Message interval.rw Integer32 ( 1..65535 ) UNITS "minutes" .1.3.6.1.3.1.4.1.8.3 |
dvbInaNiuErrorTableThis table contains the errors reported by all NIUs SEQUENCE OF DvbInaNiuErrorEntry .1.3.6.1.3.1.4.1.8.4 |
dvbInaNiuErrorEntryThe entry contains information about the errors
reported by all NIUs.
The table is indexed by an arbitrary integer.
The table is updated according to the NIU
status response messages. DvbInaNiuErrorEntry .1.3.6.1.3.1.4.1.8.4.1 |
dvbInaNiuErrorIndexSpecifies the index for this error. Unsigned32 ( 1..65535 ) .1.3.6.1.3.1.4.1.8.4.1.1 |
dvbInaNiuErrorMacAddressSpecifies the MAC address of the NIU by which this error
is reported.ro MacAddress (SNMPv2-TC) .1.3.6.1.3.1.4.1.8.4.1.2 |
dvbInaNiuErrorParamCodeSpecifies the type of error reported by the NIU.ro INTEGER .1.3.6.1.3.1.4.1.8.4.1.3 |
dvbInaNiuErrorParamValueSpecifies the value of this error.ro Unsigned32 .1.3.6.1.3.1.4.1.8.4.1.4 |
dvbInaNiuIp OBJECT IDENTIFIER .1.3.6.1.3.1.4.1.9 |
dvbInaNiuIpTableDescribes the attributes of Network Interface Units. SEQUENCE OF DvbInaNiuIpEntry .1.3.6.1.3.1.4.1.9.1 |
dvbInaNiuIpEntryInitially the table shall be empty. A new entry for a NIU
is automatically created when the NIU in question signs on.
Furthermore, the manager through the
dvbInaNiuIpRowAccessStatus object can create new entries.
This can be used in the case of re-provisioning where by
the manager first makes an entry and sets all relevant
parameters before the NIU is re-provisioned to this INA.
When a NIU entry is deleted, also all associated connection
entries are deleted. DvbInaNiuIpEntry .1.3.6.1.3.1.4.1.9.1.1 |
dvbInaNiuIpMacAddressA 48-bit value representing the unique MAC address of
the NIU. MacAddress (SNMPv2-TC) .1.3.6.1.3.1.4.1.9.1.1.1 |
dvbInaNiuIpRowAccessStatusControls and reflects the status of this row in this
table.rw RowStatus (SNMPv2-TC) .1.3.6.1.3.1.4.1.9.1.1.2 |
dvbInaNiuIpHfcIpAddrTypeThe type of address used for the HFC side.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.3.1.4.1.9.1.1.3 |
dvbInaNiuIpHfcIpAddrSpecifies the IP Address on the HFC side.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.3.1.4.1.9.1.1.4 |
dvbInaNiuIpHfcIpMaskTypeThe type of address used for the HFC side.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.3.1.4.1.9.1.1.5 |
dvbInaNiuIpHfcIpMaskSpecifies the IP Mask on the HFC side.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.3.1.4.1.9.1.1.6 |
dvbInaNiuIpNetIpAddrTypeThe type of address used for the network side.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.3.1.4.1.9.1.1.7 |
dvbInaNiuIpNetIpAddrSpecifies the IP Address on the network (client) side.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.3.1.4.1.9.1.1.8 |
dvbInaNiuIpNetIpMaskTypeThe type of address used for the network side.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.3.1.4.1.9.1.1.9 |
dvbInaNiuIpNetIpMaskSpecifies the IP Address on the network (client) side.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.3.1.4.1.9.1.1.10 |
dvbInaNiuIpAddressConfigTypeSpecifies if the NIU HFC address was received through
static configuration or through DHCPrw Enumeration .1.3.6.1.3.1.4.1.9.1.1.11 |
dvbInaNiuIpDhcpPrimarySrvTypeSpecifies the address type of the DHCP primary server.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.3.1.4.1.9.1.1.12 |
dvbInaNiuIpDhcpPrimarySrvSpecifies the DHCP primary server.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.3.1.4.1.9.1.1.13 |
dvbInaNiuIpDhcpSecondarySrvTypeSpecifies the address type of the DHCP secondary server.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.3.1.4.1.9.1.1.14 |
dvbInaNiuIpDhcpSecondarySrvSpecifies the DHCP secondary server.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.3.1.4.1.9.1.1.15 |
dvbInaMibConform OBJECT IDENTIFIER .1.3.6.1.3.1.4.2 |
dvbInaCompliances OBJECT IDENTIFIER .1.3.6.1.3.1.4.2.1 |
dvbInaGroups OBJECT IDENTIFIER .1.3.6.1.3.1.4.2.2 |