SINGLE-IP-MIB
AI MIB Summary
The SINGLE-IP-MIB facilitates the monitoring and management of single-IP address configurations and associated state parameters on network devices, specifically tracking IP address assignments, interface bindings, and reachability status via standard SNMP GET/SET operations.
The Single IP management MIB.
Main OID:
swSingleIPMIB.dlink-common-mgmt.8
65
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
65 total| Object Name |
|---|
swSingleIPMIBThe Single IP management MIB. MODULE-IDENTITY .dlink-common-mgmt.8 |
swSingleIPMgmt OBJECT IDENTIFIER .dlink-common-mgmt.8.1 |
swSingleIPInfo OBJECT IDENTIFIER .dlink-common-mgmt.8.1.1 |
swSingleIPVersionThis object indicates the version of single IP management supported in the system.ro DisplayString .dlink-common-mgmt.8.1.1.1 |
swSingleIPCapabilityThis object indicates the capability of the switch system.ro DisplayString .dlink-common-mgmt.8.1.1.2 |
swSingleIPPlatformThis object indicates the platform of the switch system.ro DisplayString .dlink-common-mgmt.8.1.1.3 |
swSingleIPCtrl OBJECT IDENTIFIER .dlink-common-mgmt.8.1.2 |
swSingleIPAdminThis object indicates Single IP management is enabled or disabled on the system.rw Enumeration .dlink-common-mgmt.8.1.2.1 |
swSingleIPRoleStateThis object indicates the role state of the switch system.rw Enumeration .dlink-common-mgmt.8.1.2.2 |
swSingleIPHoldtimeThis object indicate the holdtime of the switch in second .
default value is 180 , maximum value is 255 , minimum value is 100.rw INTEGER .dlink-common-mgmt.8.1.2.3 |
swSingleIPTimeIntervalThis object indicate the time interval of the switch in second to periodical send out
Single IP protocol control packet.
default value is 60 , maximum value is 120 , minimum value is 30 .
The swSingleIPTimeInterval will always <= swSingleIPHoldtime/2rw INTEGER .dlink-common-mgmt.8.1.2.4 |
swSingleIPMSTableThis table contain information of member switchs which belong to the
single IP management group .
A member will be joined into the group by row creation . Before a switch joined into
a group as a member switch , it must exist in the candidate table list . SEQUENCE OF SwSingleIPMSEntry .dlink-common-mgmt.8.1.3 |
swSingleIPMSEntryA list of information about member switchs belongs to the single IP management group. SwSingleIPMSEntry .dlink-common-mgmt.8.1.3.1 |
swSingleIPMSIDThe ID of the member switch .ro INTEGER .dlink-common-mgmt.8.1.3.1.1 |
swSingleIPMSDeviceNameSpecifies that the name of switch .ro DisplayString .dlink-common-mgmt.8.1.3.1.2 |
swSingleIPMSMacAddrThis object Specifies the MAC address of the member switch.ro MacAddress (SNMPv2-TC) .dlink-common-mgmt.8.1.3.1.3 |
swSingleIPMSFirmwareVerSpecifies the firmware version of the switch .ro DisplayString .dlink-common-mgmt.8.1.3.1.4 |
swSingleIPMSCapabilitySpecifies the Capability of the switch .ro DisplayString .dlink-common-mgmt.8.1.3.1.5 |
swSingleIPMSPlatformSpecifies the platform of the switch .ro DisplayString .dlink-common-mgmt.8.1.3.1.6 |
swSingleIPMSHoldtimeSpecifies the holdtime of Single IP management ptotocol send by this member switch .ro INTEGER .dlink-common-mgmt.8.1.3.1.7 |
swSingleIPMSCasSourceSpecifies the CaS id when create MS entry. The object is used
only when create swSingleIPMSEntry. The value always shows 0.rw INTEGER .dlink-common-mgmt.8.1.3.1.8 |
swSingleIPMSPasswordSpecifies the Cas password when create MS entry. The object is used
only when create swSingleIPMSEntry. The value always shows zero length string.rw OCTET STRING .dlink-common-mgmt.8.1.3.1.9 |
swSingleIPMSRowStatusThis object indicates the status of this entry.
Create means set CaS to MS, and DESTROY means set MS to CaSrw RowStatus (SNMPv2-TC) .dlink-common-mgmt.8.1.3.1.10 |
swSingleIPCaSTableThis table contain information of candidate switchs.
This table is a read only table list ,all information about candidate switchs will
maintain automatically by Single IP topology discovery protocol . SEQUENCE OF SwSingleIPCaSEntry .dlink-common-mgmt.8.1.4 |
swSingleIPCaSEntryA list of information about candidate switchs belongs to the single IP management group. SwSingleIPCaSEntry .dlink-common-mgmt.8.1.4.1 |
swSingleIPCaSIDThe ID of the candidate switchs in the LAN learned by the command switch .ro INTEGER .dlink-common-mgmt.8.1.4.1.1 |
swSingleIPCaSDeviceNameSpecifies that the name of switch .ro DisplayString .dlink-common-mgmt.8.1.4.1.2 |
swSingleIPCaSMacAddrThis object Specifies the MAC address of the candidate switch.ro MacAddress (SNMPv2-TC) .dlink-common-mgmt.8.1.4.1.3 |
swSingleIPCaSFirmwareVerSpecifies the firmware version of the switch .ro DisplayString .dlink-common-mgmt.8.1.4.1.4 |
swSingleIPCaSCapabilitySpecifies the Capability of the switch .ro DisplayString .dlink-common-mgmt.8.1.4.1.5 |
swSingleIPCaSPlatformSpecifies the platform of the switch .ro DisplayString .dlink-common-mgmt.8.1.4.1.6 |
swSingleIPCaSHoldtimeSpecifies the holdtime of Single IP management ptotocol send by this candidate switch .ro INTEGER .dlink-common-mgmt.8.1.4.1.7 |
swSingleIPGroupTableThis table contain information of Single IP manaement groups learned by the Command
switch .
This table is a read only table list ,all information about Single IP groups will
maintain automatically by Single IP topology discovery protocol . SEQUENCE OF SwSingleIPGroupEntry .dlink-common-mgmt.8.1.5 |
swSingleIPGroupEntryA list of information about single IP management groups. SwSingleIPGroupEntry .dlink-common-mgmt.8.1.5.1 |
swSingleIPGroupMacAddrThis object Specifies the MAC address of the command switch.ro MacAddress (SNMPv2-TC) .dlink-common-mgmt.8.1.5.1.1 |
swSingleIPGroupNameSpecifies that the name of the Single IP management group .ro DisplayString .dlink-common-mgmt.8.1.5.1.2 |
swSingleIPGroupDeviceNameSpecifies that the name of command switch of the group .ro DisplayString .dlink-common-mgmt.8.1.5.1.3 |
swSingleIPGroupMSNumberSpecifies the member switch number of the group .ro INTEGER .dlink-common-mgmt.8.1.5.1.4 |
swSingleIPGroupFirmwareVerSpecifies the firmware version of the switch .ro DisplayString .dlink-common-mgmt.8.1.5.1.5 |
swSingleIPGroupCapabilitySpecifies the Capability of the switch .ro DisplayString .dlink-common-mgmt.8.1.5.1.6 |
swSingleIPGroupPlatformSpecifies the platform of the switch .ro DisplayString .dlink-common-mgmt.8.1.5.1.7 |
swSingleIPGroupHoldtimeSpecifies the holdtime of Single IP management ptotocol send by this command switch .ro INTEGER .dlink-common-mgmt.8.1.5.1.8 |
swSingleIPNeighborTableThis table contain information of Single IP manaement Neighbors learned by the switch .
This table is a read only table list ,all information about Single IP Neighbors will
maintain automatically by Single IP topology protocol . SEQUENCE OF SwSingleIPNeighborEntry .dlink-common-mgmt.8.1.6 |
swSingleIPNeighborEntryA list of information about single IP management Neighbors. SwSingleIPNeighborEntry .dlink-common-mgmt.8.1.6.1 |
swSingleIPNBReceivedPortSpecifies the received port of the Neighbor switch.ro INTEGER .dlink-common-mgmt.8.1.6.1.1 |
swSingleIPNBMacAddrThis object Specifies the MAC address of the Neighbor switch.ro MacAddress (SNMPv2-TC) .dlink-common-mgmt.8.1.6.1.2 |
swSingleIPNBRoleStateThis object Specifies the role state of the Neighbor switch.ro Enumeration .dlink-common-mgmt.8.1.6.1.3 |
singleIPMSNotify OBJECT IDENTIFIER .dlink-common-mgmt.8.6 |
singleIPMSNotifyPrefix OBJECT IDENTIFIER .dlink-common-mgmt.8.6.0 |
swSingleIPMSColdStartCommander switch will send swSingleIPMSColdStart notification to indicated
host when its Member generate cold start notification. NOTIFICATION-TYPE .dlink-common-mgmt.8.6.0.11 |
swSingleIPMSWarmStartCommander switch will send swSingleIPMSWarmStart notification to indicated
host when its Member generate warm start notification. NOTIFICATION-TYPE .dlink-common-mgmt.8.6.0.12 |
swSingleIPMSLinkDownCommander switch will send swSingleIPMSLinkDown notification to indicated
host when its Member generate link down notification. NOTIFICATION-TYPE .dlink-common-mgmt.8.6.0.13 |
swSingleIPMSLinkUpIf Commander switch will send swSingleIPMSLinkUp notification to indicated
host when its Member generate link up notification. NOTIFICATION-TYPE .dlink-common-mgmt.8.6.0.14 |
swSingleIPMSAuthFailCommander switch will send swSingleIPMSAuthFail notification to indicated
host when it Member generate authentation failure notification. NOTIFICATION-TYPE .dlink-common-mgmt.8.6.0.15 |
swSingleIPMSnewRootCommander switch will send swSingleIPMSnewRoot notification to indicated
host when it Member generate new root notification. NOTIFICATION-TYPE .dlink-common-mgmt.8.6.0.16 |
swSingleIPMSTopologyChangeCommander switch will send swSingleIPMSTopologyChange notification to
indicated host when it Member generate topology chnage notification. NOTIFICATION-TYPE .dlink-common-mgmt.8.6.0.17 |
swSingleIPMSrisingAlarmCommander switch will send swSingleIPMSrisingAlarm notification to
indicated host when it Member generate rising Alarm notification. NOTIFICATION-TYPE .dlink-common-mgmt.8.6.0.18 |
swSingleIPMSfallingAlarmCommander switch will send swSingleIPMSfallingAlarm notification to
indicated host when it Member generate falling Alarm notification. NOTIFICATION-TYPE .dlink-common-mgmt.8.6.0.19 |
swSingleIPMSmacNotificationCommander switch will send swSingleIPMSmacNotification notification to
indicated host when it Member generate mac addresses variation notification. NOTIFICATION-TYPE .dlink-common-mgmt.8.6.0.20 |
swSingleIPMSPortTypeChangeCommander switch will send swSingleIPMSPortTypeChange notification to
indicated host when it Member generate port type change notification. NOTIFICATION-TYPE .dlink-common-mgmt.8.6.0.21 |
swSingleIPMSPowerStatusChgCommander switch will send swSingleIPMSPowerStatusChg notification to
indicated host when it Member generate Power Status change notification. NOTIFICATION-TYPE .dlink-common-mgmt.8.6.0.22 |
swSingleIPMSPowerFailureCommander switch will send swSingleIPMSPowerFailure notification to indicated
host when it Member generate Power Failure notification. NOTIFICATION-TYPE .dlink-common-mgmt.8.6.0.23 |
swSingleIPMSPowerRecoverCommander switch will send swSingleIPMSPowerRecover notification to indicated
host when it Member generate Power Recover notification. NOTIFICATION-TYPE .dlink-common-mgmt.8.6.0.24 |
singleIPNotifyBidings OBJECT IDENTIFIER .dlink-common-mgmt.8.6.1 |
swSingleIPMSTrapMessageThe string that member switch sent.ro OCTET STRING .dlink-common-mgmt.8.6.1.1 |