Home/Catalog/SCTE-HMS-MPEG-MIB

SCTE-HMS-MPEG-MIB

This MIB module is for representing MPEG equipment present in the headend and is supported by a SNMP agent. It defines both the MPEG input and output MIB objects for managing MPEG input and output transport streams, programs and elementary streams. It provides both input and output related statistics, as well as program mapping and video session information. All the tables, except mpegProgramMappingTable and mpegVideoSessionTable, capture and store the information related to active transport streams only. Optional MIB objects will have default values defined in this MIB file.
Main OID:
heMpegCommonMIB.1.3.6.1.4.1.5591.1.11.5.4.1
175
Objects
Active
Status
6
Dependencies

Imported Objects

SNMPv2-SMI
SNMPv2-CONF
SNMPv2-TC
IF-MIB
INET-ADDRESS-MIB
SCTE-HMS-HEADENDIDENT-TC-MIB

Objects

175 total
Object Name
heMpegCommonMIBThis MIB module is for representing MPEG equipment present in the headend and is supported by a SNMP agent. It defines both the MPEG input and output MIB objects for managing MPEG input and output transport streams, programs and elementary streams. It provides both input and output related statistics, as well as program mapping and video session information. All the tables, except mpegProgramMappingTable and mpegVideoSessionTable, capture and store the information related to active transport streams only. Optional MIB objects will have default values defined in this MIB file.
MODULE-IDENTITY
.1.3.6.1.4.1.5591.1.11.5.4.1
mpegMIBObjectsThis branch specifies the MPEG Common MIB objects that can be common to any device using MPEG.
OBJECT IDENTIFIER
.1.3.6.1.4.1.5591.1.11.5.4.1.1
mpegDigitalInputsThis branch specifies the attributes of the incoming streams to the MPEG device.
OBJECT IDENTIFIER
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1
mpegLossOfSignalTimeoutThis object specifies the loss of signal timeout on any incoming stream.rw
Unsigned32 UNITS "milliseconds"
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.1
mpegInputTSTableThis table specifies the attributes of video sessions or SPTSs.
SEQUENCE OF MpegInputTSEntry
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.2
mpegInputTSEntryEach entry specifies the attributes of a transport stream (SPTS/MPTS).
MpegInputTSEntry
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.2.1
mpegInputTSIndexThe unique identifier of the Input TS.
Unsigned32
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.2.1.1
mpegInputTSTypeThe type of stream, e.g., SPTS or MPTS.ro
Enumeration
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.2.1.2
mpegInputTSConnectionTypeThe type of input flow of the stream. The value 'udp' indicates either unicast or multicast udp origination flows.ro
Enumeration
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.2.1.3
mpegInputTSConnectionThe reference to the start of the data source table that feeds content to the input stream. For the Connection Type 'udp' this object contains the pointer to the first entry of the UDP Origination table Below is an example of the value expected for a Connection Type 'udp'. An input stream (mpegInputTSIndex = 8) is being feed by a udp Connection (mpegInputUdpOriginationIndex = 4) with 3 associated udp streams each one identified by mpegInputUdpOriginationId = 1,2,3. mpegInputTSEntry TSIndex ConnectionType Connection 1 1 <any> 2 1 <any> ... 8 1 mpegInputUdpOriginationIfIndex.4.3 9 2 <any> MpegInputUdpOriginationEntry UdpOriginationIndex UdpOriginationId 3 1,4,5 4 1,2,3 ...ro
RowPointer (SNMPv2-TC)
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.2.1.4
mpegInputTSActiveConnectionThe reference to the instance of the data source that is feeding the input stream. For the Connection Type 'udp' this object contains the pointer to the UDP Origination table that the input Stream is using. Below is an example of the value expected for a Connection Type 'udp'. An input stream (mpegInputTSIndex = 8) is being feed by a udp Connection (mpegInputUdpOriginationIndex = 4) have associated 3 udp streams each one identified by mpegInputUdpOriginationId = 1,2,3. The Udp stream 3 is currently used by the input transport stream. mpegInputTSEntry TSIndex ConnectionType ActiveConnection 1 1 <any> 2 1 <any> ... 8 1 mpegInputUdpOriginationIfIndex.4.3 9 2 <any> MpegInputUdpOriginationEntry UdpOriginationIndex UdpOriginationId 3 1,4,5 4 1,2,3 ... Note in the example that the sub oid 4 (in mpegInputUdpOriginationIfIndex.4.3) represents the sub-oid that aggregates all the udp origination flows associated with the transport stream.ro
RowPointer (SNMPv2-TC)
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.2.1.5
mpegInputTSPsiDetectedA simple check that Program Specific Information has or has not been detected. The value 'true' indicates PSI was detected.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.2.1.6
mpegInputTSStartTimeSpecifies the time the MPEG device started receiving the stream, i.e., the time the entry was added to the table.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.2.1.7
mpegInputTSResourceAllocatedIf true, all resources have been allocated for the stream.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.2.1.8
mpegInputTSNumProgramsThe number of programs in the input transport stream.ro
Unsigned32
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.2.1.9
mpegInputTSRateThe data rate of the incoming program or SPTS.ro
Unsigned32
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.2.1.10
mpegInputTSMaxRateThe maximum data rate of the incoming stream for either a variable or constant bit rate stream (VBR/CVR).ro
Unsigned32
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.2.1.11
mpegInputTSPatVersionProgram Association Table version of the transport stream. The value -1 means PAT version is not supported for input transport stream.ro
Integer32 (-1..31)
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.2.1.12
mpegInputTSCatVersionThe Conditional Access Table version number of transport stream. The value -1 means CAT version is not supported for input transport stream.ro
Integer32 (-1..31)
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.2.1.13
mpegInputTSNitPidNIT PID of the input transport stream.ro
HePIDValue (SCTE-HMS-HEADENDIDENT-TC-MIB)
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.2.1.14
mpegInputTSNumEmmsThe number of EMMs in the input stream. The default value 9999 means the device does not support encryption.ro
Unsigned32
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.2.1.15
mpegInputTSTSIDThe input TSID of the transport stream. A valid TSID is of 16 bits length. If TSID is not supported, all 32-bits shall be set to 1.ro
Unsigned32
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.2.1.16
mpegInputTSLockIndicates the lock status of the transport stream. 'intermittent' means the transport stream is transitioning between lock and unlock state over a period of time. This condition is vendor-specific. 'notMonitored' means the device is not tracking the locking state.ro
Enumeration
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.2.1.17
mpegInputProgTableThe table describing the PSI of each incoming program.
SEQUENCE OF MpegInputProgEntry
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.3
mpegInputProgEntryEach entry specifies the parameters for each incoming program.
MpegInputProgEntry
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.3.1
mpegInputProgIndexThis object serves as the third index of this mib table. The index should uniquely identify a program given a transport stream index. In other words, it's unique within same transport stream.
Unsigned32
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.3.1.1
mpegInputProgNoThis object specifies the identifier of the program present in the transport stream of the incoming video stream. This information is contained in PAT table.ro
Unsigned32
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.3.1.2
mpegInputProgPmtVersionThis object specifies the PMT version of the program. It is a 5-bit unsigned integer. The default value of 0 means input program PMT version is no supported.ro
Unsigned32
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.3.1.3
mpegInputProgPmtPidPMT PID of the program.ro
HePIDValue (SCTE-HMS-HEADENDIDENT-TC-MIB)
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.3.1.4
mpegInputProgPcrPidPCR PID of the program.ro
HePIDValue (SCTE-HMS-HEADENDIDENT-TC-MIB)
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.3.1.5
mpegInputProgEcmPidThis object specifies the ECM PID of the program.ro
HePIDValue (SCTE-HMS-HEADENDIDENT-TC-MIB)
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.3.1.6
mpegInputProgNumElemsThe number of elementary streams in the program.ro
Unsigned32
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.3.1.7
mpegInputProgNumEcmsThe number of ECMs for the program. The default value 9999 means the device does not support encryption.ro
Unsigned32
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.3.1.8
mpegInputProgCaDescrConditional access descriptor is used to specify both system-wide conditional access management information such as EMMS and elementary stream-specific information such as ECMs. If any elementary stream is scrambled, a CA descriptor shall be present for the program containing that elementary stream. This object specifies the CA descriptor for this program. If the program does not have an associated CA descriptor, then this object has a zero-length string.ro
OCTET STRING
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.3.1.9
mpegInputProgScte35DescrSCTE 35 descriptor. If not present, a zero-length string is returned. This field is optional for some devices that supports large number of input programs due to the fact that extensive decoding can be resource intensive and effect scalability. A zero-length string is returned.ro
OCTET STRING
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.3.1.10
mpegInputProgScte18DescrSCTE 18 descriptor. If not present, a zero-length string is returned. This field is optional for some devices that supports large number of input programs due to the fact that extensive decoding can be resource intensive and effect scalability. A zero-length string is returned.ro
OCTET STRING
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.3.1.11
mpegProgESTableThis table contains information about the elementary streams in a program.
SEQUENCE OF MpegProgESEntry
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.4
mpegProgESEntryA combination of mpegInputTSIndex, mpegInputProgIndex and mpegProgESIndex uniquely identifies an entry in the mpegProgESTable.
MpegProgESEntry
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.4.1
mpegProgESIndexThe unique index of the elementary stream.
Unsigned32
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.4.1.1
mpegProgESPIDThis is the PID for each transport stream packet which carries the program element.ro
Integer32
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.4.1.2
mpegProgESTypeThe type of elementary stream(video, audio, or data) of the incoming video session received from the video server.ro
ProgDataType (SCTE-HMS-HEADENDIDENT-TC-MIB)
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.4.1.3
mpegProgESCaDescrCA descriptor associated with the elementary stream. If there is no CA descriptor for the elementary stream, then this object has a zero-length string.ro
OCTET STRING
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.4.1.4
mpegProgESScte35DescrSCTE 35 descriptor. If not supported or present, a zero-length string is returned.ro
OCTET STRING
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.4.1.5
mpegProgESScte18DescrSCTE 18 descriptor. If not supported or present, a zero-length string is returned.ro
OCTET STRING
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.4.1.6
mpegInputStatsTableStream statistics, SPTS or MPTS.
SEQUENCE OF MpegInputStatsEntry
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.5
mpegInputStatsEntryEach entry describes statistics for each Input TS.
MpegInputStatsEntry
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.5.1
mpegInputStatsPcrJitterThis object stores the difference between the actual value of the PCR and its expected value. It is expressed in nanoseconds. This object is default to -1 if it's not supported.ro
Integer32 (-1..2147483647) UNITS "nanoseconds"
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.5.1.1
mpegInputStatsMaxPacketJitterThis object stores the measurement of the maximum variation in arrival time or delay between individual packets. It is expressed in milliseconds. This object is default to -1 if it's not supported.ro
Integer32 (-1..2147483647) UNITS "milliseconds"
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.5.1.2
mpegInputStatsPcrPacketsThis reflects the number of MPEG transport packets, having PCR, received for the stream.ro
Counter32
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.5.1.3
mpegInputStatsNonPcrPacketsThis reflects the number of MPEG transport packets, without PCR, received for the stream.ro
Counter32
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.5.1.4
mpegInputStatsUnexpectedPacketsThis reflects the number of transport packets whose PIDs are not expected.ro
Counter32
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.5.1.5
mpegInputStatsContinuityErrorsTransport packets have continuity counters. Successive packets have contiguous values in the continuity counter. Continuity counter error occurs when the successive packets do not have contiguous value and discontinuity indicator is not set. This object reflects the number of continuity counter errors.ro
Counter32
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.5.1.6
mpegInputStatsSyncLossPacketsWhen a sync byte is missing in a MPEG packet this value is incremented. This value indicates the number of MPEG packets that had missing sync byte per stream.ro
Counter32
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.5.1.7
mpegInputStatsPcrIntervalExceedsIndicates the number of times that the interval between two successive PCR packets for any program in the transport stream exceeds 100 milliseconds.ro
Counter32
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.5.1.8
mpegInputUdpOriginationTableSpecifies the UDP unicast or multicast flows of an input transport stram. For unicast it represents the UDP port and optionally destination IP address of the input TS origination UDP IP flow. for Multicast it represents the set of SSM multicast groups of the input TS origination UDP IP flow.
SEQUENCE OF MpegInputUdpOriginationEntry
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.6
mpegInputUdpOriginationEntryEach entry specifies the IP UDP information of the input TS origination.
MpegInputUdpOriginationEntry
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.6.1
mpegInputUdpOriginationIndexThe unique identifier of the UDP input TS origination information.
Unsigned32
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.6.1.1
mpegInputUdpOriginationIdThe unique identifier of each UDP IP flow associated with the input TS UDP origination.
Unsigned32
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.6.1.2
mpegInputUdpOriginationIfIndexThe interface index where the UDP flow is being received.ro
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.6.1.3
mpegInputUdpOriginationInetAddrTypeThe address type associated with input TS origination UDP IP flow. 'ipv4' and 'ipv6' are the only used types.ro
InetAddressType (INET-ADDRESS-MIB)
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.6.1.4
mpegInputUdpOriginationSrcInetAddrFor Multicast it represents the Source Specific Multicast IP Address of the UDP IP flow. For unicast UDP IP flows is either the the IP source address of the IP flow or the all zeros address if unknown or irrelevant for the input TS.ro
InetAddress (INET-ADDRESS-MIB)
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.6.1.5
mpegInputUdpOriginationDestInetAddrFor multicast it represents the group address of the SSM origination input TS. For unicast UDP IP flows is either the IP destination address of the udp flow or the all zeros address if unknown or irrelevant for the input TS.ro
InetAddress (INET-ADDRESS-MIB)
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.6.1.6
mpegInputUdpOriginationDestPortThe UDP destination port of the UDP IP flow of the input TS.ro
InetPortNumber (INET-ADDRESS-MIB)
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.6.1.7
mpegInputUdpOriginationActiveThe activation state of the UDP flow. The value 'true' indicates the UDP flow data stream is being sensed or buffered for the input TS, independently of that flow being used for a video session. Otherwise the value 'false' is reported. For multicast UDP origination flows the value 'true' indicates the UDP flow was successfully joined.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.6.1.8
mpegInputUdpOriginationPacketsDetectedIndicates whether UDP flow packets are being detected. It is vendor dependent the determination if packets for a UDP flow are being detected.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.6.1.9
mpegInputUdpOriginationRankIndicates the Rank Priority used to determine the UDP flow selected for the input TS processing and Video Session assignments.ro
Unsigned32
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.6.1.10
mpegInputUdpOriginationInputTSIndexThe mpegInputTSIndex that this entry is associated withro
Unsigned32
.1.3.6.1.4.1.5591.1.11.5.4.1.1.1.6.1.11
mpegOutputsThis branch specifies the attributes of the output streams of the MPEG device.
OBJECT IDENTIFIER
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2
mpegInsertPacketTableThis table describes packet insertion information. Typical packets that are inserted at the RF output of a device are PSI, PSIP, and CVCT MPEG packets. These packets have their own PID. This table may be empty if the video device does not support packet insertion or do not have any packet insertion configured.
SEQUENCE OF MpegInsertPacketEntry
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.1
mpegInsertPacketEntryAn entry in the Packet Management Table.
MpegInsertPacketEntry
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.1.1
mpegInsertPacketIndexIndex of list of packets being inserted into all MPEG streams. This index is unique within the SNMP agent that may be managing multiple MPEG devices.
Unsigned32
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.1.1.1
mpegInsertPacketListIdReference number of packets being inserted into MPEG stream.ro
Unsigned32
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.1.1.2
mpegInsertPacketImmediateExecutionIf true, packet insertion starts immediately.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.1.1.3
mpegInsertPacketStartTimeUnix epoch start time for insertions (if Immediate Execution is false).ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.1.1.4
mpegInsertPacketRepeatIndicates whether the insert packet is one-time or repetitive.ro
Enumeration
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.1.1.5
mpegInsertPacketContinuousFlagIf true, packet will be sent periodically, until cancelled.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.1.1.6
mpegInsertPacketRateRate at which packet list should be inserted.ro
Unsigned32 UNITS "milliseconds"
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.1.1.7
mpegInsertPacketDeviceIfIndexThe ifIndex of the output device interface that the packet will be inserted at.ro
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.1.1.8
mpegOutputStatsTableThe table specifies the diagnostic stats objects for the outputs transport stream of an MPEG device.
SEQUENCE OF MpegOutputStatsEntry
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.2
mpegOutputStatsEntryEach entry specifies the diagnostics for each output TS.
MpegOutputStatsEntry
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.2.1
mpegOutputStatsDroppedPacketsNumber of MPEG packets dropped on this output transport stream.ro
Counter32
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.2.1.1
mpegOutputStatsFifoOverflowNumber of FIFO overflows on this output transport stream.ro
Counter32
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.2.1.2
mpegOutputStatsFifoUnderflowNumber of FIFO underflows on this output transport stream.ro
Counter32
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.2.1.3
mpegOutputStatsDataRateData rate for the content on this output transport stream.ro
Unsigned32 UNITS "bps"
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.2.1.4
mpegOutputStatsAvailableBandwidthUnused bandwidth on this port.ro
Unsigned32 UNITS "bps"
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.2.1.5
mpegOutputStatsChannelUtilizationThe current utilization of a channel defined as (measured data rate / total bandwidth ) * 1000. If not applicable, a value of -1 is returned.ro
Integer32 (-1|0..1000) UNITS "0.1 Percent"
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.2.1.6
mpegOutputStatsTotalPacketsThe total number of packets output for this transport stream since the start of the output stream.ro
Counter64
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.2.1.7
mpegOutputTSTableThis table specifies the attributes of an outgoing transport stream SPTS or MPTS.
SEQUENCE OF MpegOutputTSEntry
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.3
mpegOutputTSEntryEach entry specifies the attributes of an output transport stream, SPTS or MPTS.
MpegOutputTSEntry
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.3.1
mpegOutputTSIndexTable index. It uniquely identifies a mpegOutputTSEntry. This index is independent from mpegOutputTSTSID.
Unsigned32
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.3.1.1
mpegOutputTSTypeThe type of stream, e.g., SPTS or MPTS.ro
Enumeration
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.3.1.2
mpegOutputTSConnectionTypeThe type of output flow of the stream. The value 'qam' indicates a QAM output for the stream The value 'udp' indicates either unicast or multicast udp destination flows for the stream.ro
Enumeration
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.3.1.3
mpegOutputTSConnectionThe reference to the instance of the output connection fpr the output stream. For the Connection Type 'qam' this object contains the ifIndex object identifier of the QAM channel for the output stream. For the Connection Type 'udp' this object contains the pointer to the UDP Destination table being used for the output stream. This is similar to mpegInputTSConnection - See description for details.ro
RowPointer (SNMPv2-TC)
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.3.1.4
mpegOutputTSNumProgramsThe number of programs in the output transport stream.ro
Unsigned32
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.3.1.5
mpegOutputTSTSIDThe TSID of the output transport stream.ro
Unsigned32
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.3.1.6
mpegOutputTSNitPidNIT PID of the outgoing transport stream.ro
HePIDValue (SCTE-HMS-HEADENDIDENT-TC-MIB)
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.3.1.7
mpegOutputTSCaPidThe CA PID of the outgoing transport stream.ro
HePIDValue (SCTE-HMS-HEADENDIDENT-TC-MIB)
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.3.1.8
mpegOutputTSCatInsertRateThe CAT insertion rate.ro
Unsigned32 UNITS "tables/ms"
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.3.1.9
mpegOutputTSPatInsertRateThe PAT table interval expressed in ms.ro
Unsigned32 UNITS "tables/ms"
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.3.1.10
mpegOutputTSPmtInsertRateThe PMT insertion rate. This is expressed in tables/second.ro
Unsigned32 UNITS "tables/ms"
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.3.1.11
mpegOutputTSStartTimeThis object specifies the time the MPEG device started transmitting the output stream, i.e., the time the entry was added to the table. The support of this object is optional. If not supported, this object is default to a zero length string.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.3.1.12
mpegOutputProgTableThe table describing the PSI of each outgoing program.
SEQUENCE OF MpegOutputProgEntry
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.4
mpegOutputProgEntryEach entry specifies the parameters for each incoming program.
MpegOutputProgEntry
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.4.1
mpegOutputProgIndexThis object is the table index for output program.
Unsigned32
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.4.1.1
mpegOutputProgNoThis object specifies the identifier of the program present in the transport stream of the outgoing program.ro
Unsigned32
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.4.1.2
mpegOutputProgPmtVersionThis object specifies the PMT version of the outgoing program. The default value of 0 means output program PMT version is not supported.ro
Unsigned32
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.4.1.3
mpegOutputProgPmtPidPMT PID of the outgoing program.ro
HePIDValue (SCTE-HMS-HEADENDIDENT-TC-MIB)
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.4.1.4
mpegOutputProgPcrPidPCR PID of the outgoing program.ro
HePIDValue (SCTE-HMS-HEADENDIDENT-TC-MIB)
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.4.1.5
mpegOutputProgEcmPidThis object specifies the ECM PID of the outgoing program.ro
HePIDValue (SCTE-HMS-HEADENDIDENT-TC-MIB)
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.4.1.6
mpegOutputProgNumElemsThe number of elementary streams in the outgoing program.ro
Unsigned32
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.4.1.7
mpegOutputProgNumEcmsThe number of ECMs for the outgoing program. The default value 9999 means the device does not support encryption.ro
Unsigned32
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.4.1.8
mpegOutputProgCaDescrConditional access descriptor is used to specify both system-wide conditional access management information such as EMMS and elementary stream-specific information such as ECMs. If any elementary stream is scrambled, a CA descriptor shall be present for the program containing that elementary stream. This object specifies the CA descriptor for this program. If the outgoing program does not have an associated CA descriptor, then this object has a zero-length string.ro
OCTET STRING
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.4.1.9
mpegOutputProgScte35DescrSCTE 35 descriptor in the outgoing program. This object is set to a string of zero-length if there's no SCTE 35 descriptor in the outgoing program or not supported.ro
OCTET STRING
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.4.1.10
mpegOutputProgScte18DescrSCTE 18 descriptor. If not present or not supported, a zero-length string is returned.ro
OCTET STRING
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.4.1.11
mpegOutputProgElemStatsTableThe stats associated with the elementary streams of an MPEG program.
SEQUENCE OF MpegOutputProgElemStatsEntry
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.5
mpegOutputProgElemStatsEntryEach entry constitutes the stats for a program associated with a transport stream.
MpegOutputProgElemStatsEntry
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.5.1
mpegOutputProgElemStatsIndexThe unique identifier of the elementary stream.
Unsigned32
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.5.1.1
mpegOutputProgElemStatsPidThe Pid of output program elementary stream.
HePIDValue (SCTE-HMS-HEADENDIDENT-TC-MIB)
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.5.1.2
mpegOutputProgElemStatsElemTypeThe type of elementary stream (video, audio, or data) of the program. Some devices, such as device, may choose not to report exact type due to scalability issues, in which case, this object shall be set to unknown.ro
Enumeration
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.5.1.3
mpegOutputProgElemStatsDataRateThe data rate of the elementary stream. Return -1 if not supported.ro
Integer32 UNITS "bps"
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.5.1.4
mpegOutputUdpDestinationTableSpecifies the UDP unicast or multicast of the output TS this entry references. For unicast it represents the UDP port and optionally destination IP address of the output TS destination UDP IP flow. for Multicast it represents the set of SSM multicast groups of the output TS destination UDP IP flow.
SEQUENCE OF MpegOutputUdpDestinationEntry
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.6
mpegOutputUdpDestinationEntryEach entry specifies the IP UDP information of the output TS destination.
MpegOutputUdpDestinationEntry
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.6.1
mpegOutputUdpDestinationIndexThe unique identifier of the UDP output TS destination information.
Unsigned32
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.6.1.1
mpegOutputUdpDestinationIdThe unique identifier of each UDP IP flow associated with the output TS UDP destination.
Unsigned32
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.6.1.2
mpegOutputUdpDestinationIfIndexThe interface index where the UDP flow is being sent.ro
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.6.1.3
mpegOutputUdpDestinationInetAddrTypeThe address type associated with output TS destination UDP IP flow.ro
InetAddressType (INET-ADDRESS-MIB)
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.6.1.4
mpegOutputUdpDestinationSrcInetAddrFor Multicast it represents the Source Specific Multicast IP Address of the UDP IP flow. For unicast UDP IP flows is either the the IP source address of the IP flow or the all zeros address if unknown or irrelevant for the destination output TS.ro
InetAddress (INET-ADDRESS-MIB)
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.6.1.5
mpegOutputUdpDestinationDestInetAddrFor multicast it represents the group address of the SSM destination output TS. For unicast UDP IP flows is either the IP destination address of the udp flow or the all zeros address if unknown or irrelevant for the destination output TS.ro
InetAddress (INET-ADDRESS-MIB)
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.6.1.6
mpegOutputUdpDestinationDestPortThe UDP port of the UDP IP flow of the output TS.ro
InetPortNumber (INET-ADDRESS-MIB)
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.6.1.7
mpegOutputUdpDestinationOutputTSIndexThe mpegOutputTSIndex that this entry is associated with.ro
Unsigned32
.1.3.6.1.4.1.5591.1.11.5.4.1.1.2.6.1.8
mpegProgramMappingTableThis table describes program mappings, i.e., ties the input destination to the output destination for every program active in the device.
SEQUENCE OF MpegProgramMappingEntry
.1.3.6.1.4.1.5591.1.11.5.4.1.1.3
mpegProgramMappingEntryEach entry describes the mapping, i.e., ties input destination to output destination for a given program.
MpegProgramMappingEntry
.1.3.6.1.4.1.5591.1.11.5.4.1.1.3.1
mpegProgramMappingIndexThe table index uniquely identifies an entry in mpegProgramMappingTable. This index should be unique within the same SNMP agent that may be managing multiple MPEG devices.
Unsigned32
.1.3.6.1.4.1.5591.1.11.5.4.1.1.3.1.1
mpegProgramMappingOutputProgIndexThis object is set to mpegOutputProgIndex of the corresponding entry in mpegOutputProgTable for a given output program.ro
Unsigned32
.1.3.6.1.4.1.5591.1.11.5.4.1.1.3.1.2
mpegProgramMappingOutputTSIndexThis object is set to mpegOutputTSIndex of the corresponding entry in mpegOutputProgTable for a given output program.ro
Unsigned32
.1.3.6.1.4.1.5591.1.11.5.4.1.1.3.1.3
mpegProgramMappingInputProgIndexThis object is set to the value of mpegInputProgIndex of the corresponding entry in mpegInputProgTable for a given input program.ro
Unsigned32
.1.3.6.1.4.1.5591.1.11.5.4.1.1.3.1.4
mpegProgramMappingInputTSIndexThis object is set to the value of mpegInputTSIndex of the corresponding entry in mpegInputProgTable for a given input program.ro
Unsigned32
.1.3.6.1.4.1.5591.1.11.5.4.1.1.3.1.5
mpegVideoSessionTableThis table is used to store video session information. The session may be of VOD, SDV or DB type. It captures logical information about a video stream, such as source and destination addresses, UDP port etc, and also ties it with its direct mapping of input and output programs. This table captures video sessions provisioned by both session-based and table-based method. It is capable to support N-M mapping of video programs that's required for redundant source or video stream cloning etc.
SEQUENCE OF MpegVideoSessionEntry
.1.3.6.1.4.1.5591.1.11.5.4.1.1.4
mpegVideoSessionEntryEach entry describes a logical video session.
MpegVideoSessionEntry
.1.3.6.1.4.1.5591.1.11.5.4.1.1.4.1
mpegVideoSessionIndexThe table index uniquely identifies an entry in mpegVideoSessionTable. This index should be unique within the same SNMP agent that may be managing multiple MPEG devices.
Unsigned32
.1.3.6.1.4.1.5591.1.11.5.4.1.1.4.1.1
mpegVideoSessionPhyMappingIndexThis object shall be set to mpegProgramMappingIndex of the corresponding mpegProgramMappingEntry which contains physical mapping between the input and output program.ro
Unsigned32
.1.3.6.1.4.1.5591.1.11.5.4.1.1.4.1.2
mpegVideoSessionPIDRemapThis object value 'true' indicates that the session has PID remapping. The value 'false' indicates that the session has no PID remapping.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.5591.1.11.5.4.1.1.4.1.3
mpegVideoSessionModeIndicates whether the transport stream is associated with a multiplexed session or is pass-through. For pass-through type transport streams, all elementary stream level information in optional.ro
Enumeration
.1.3.6.1.4.1.5591.1.11.5.4.1.1.4.1.4
mpegVideoSessionStateactive means in-use, provisioned means not-in-use or active such as video session provisioned for redundant source.ro
Enumeration
.1.3.6.1.4.1.5591.1.11.5.4.1.1.4.1.5
mpegVideoSessionProvMethodThe type of session, e.g., in QAM table-based or session-based.ro
Enumeration
.1.3.6.1.4.1.5591.1.11.5.4.1.1.4.1.6
mpegVideoSessionEncryptionTypeIndicates the encryption algorithm of the session.ro
Enumeration
.1.3.6.1.4.1.5591.1.11.5.4.1.1.4.1.7
mpegVideoSessionEncryptionInfoIndicates a vendor-specific reference to information associated to the session encryption algorithm.ro
AutonomousType (SNMPv2-TC)
.1.3.6.1.4.1.5591.1.11.5.4.1.1.4.1.8
mpegVideoSessionBitRateIndicates a session throughtput in bps.ro
Unsigned32 UNITS "bps"
.1.3.6.1.4.1.5591.1.11.5.4.1.1.4.1.9
mpegVideoSessionIDThe session ID associated with the stream in the case of a session-based QAM. This is not applicable to a table-based QAM. This ID may be used by NMS system to uniquely identify an input program to output program mapping.ro
OCTET STRING
.1.3.6.1.4.1.5591.1.11.5.4.1.1.4.1.10
mpegVideoSessionSelectedInputThe reference to the entry of the input flow currently being used in the video session.ro
RowPointer (SNMPv2-TC)
.1.3.6.1.4.1.5591.1.11.5.4.1.1.4.1.11
mpegVideoSessionSelectedOutputThe reference to the entry of the output flow currently being used in the video session.ro
RowPointer (SNMPv2-TC)
.1.3.6.1.4.1.5591.1.11.5.4.1.1.4.1.12
mpegVideoSessionPtrTableThis table is used to provide a quick reference of the Program Mapping and input/output TS connection information associated with a Video Session.
SEQUENCE OF MpegVideoSessionPtrEntry
.1.3.6.1.4.1.5591.1.11.5.4.1.1.5
mpegVideoSessionPtrEntryEach entry describes the associations with ProgramMapping and transport stream connections.
MpegVideoSessionPtrEntry
.1.3.6.1.4.1.5591.1.11.5.4.1.1.5.1
mpegVideoSessionPtrInputProgIndexIndicates the Input Program index value of the video session.
Unsigned32
.1.3.6.1.4.1.5591.1.11.5.4.1.1.5.1.1
mpegVideoSessionPtrInputTSIndexIndicates the input TS index value of the video session.
Unsigned32
.1.3.6.1.4.1.5591.1.11.5.4.1.1.5.1.2
mpegVideoSessionPtrInputTSConnTypeIndicates the Input TS Connection type value of the video session.
Unsigned32
.1.3.6.1.4.1.5591.1.11.5.4.1.1.5.1.3
mpegVideoSessionPtrInputTSConnectionIndicates the Input TS Connection value of the video session.
Unsigned32
.1.3.6.1.4.1.5591.1.11.5.4.1.1.5.1.4
mpegVideoSessionPtrOutputProgIndexIndicates the Output Program index value of the video session.
Unsigned32
.1.3.6.1.4.1.5591.1.11.5.4.1.1.5.1.5
mpegVideoSessionPtrOutputTSIndexIndicates the Output TS index value of the video session.
Unsigned32
.1.3.6.1.4.1.5591.1.11.5.4.1.1.5.1.6
mpegVideoSessionPtrOutputTSConnTypeIndicates the Output TS Connection type value of the video session.
Unsigned32
.1.3.6.1.4.1.5591.1.11.5.4.1.1.5.1.7
mpegVideoSessionPtrOutputTSConnectionIndicates the Output TS Connection value of the video session.
Unsigned32
.1.3.6.1.4.1.5591.1.11.5.4.1.1.5.1.8
mpegVideoSessionPtrStatusIndicates the status of the session. Only active sessions need to be reported.ro
Enumeration
.1.3.6.1.4.1.5591.1.11.5.4.1.1.5.1.9
mpegInputTSOutputSessionTableSpecifies the list of Output Session indexes that the Input TS entry is feeding. For unicast it will typically point to just one output Session. For multicast, it will point to all the output Sessions using this internally replicated input TS.
SEQUENCE OF MpegInputTSOutputSessionEntry
.1.3.6.1.4.1.5591.1.11.5.4.1.1.6
mpegInputTSOutputSessionEntryEach entry specifies the sessionID associated with the Input TS Entry Index.
MpegInputTSOutputSessionEntry
.1.3.6.1.4.1.5591.1.11.5.4.1.1.6.1
mpegInputTSOutputSessionCreateTimeIndicates the Creation Time of the session referenced by this entry.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.5591.1.11.5.4.1.1.6.1.1
mpegMIBConformanceThis branch describes the different MPEG MIB object groups and the different levels of compliance.
OBJECT IDENTIFIER
.1.3.6.1.4.1.5591.1.11.5.4.1.2
mpegMIBCompliancesThe different levels of compliance to the MPEG MIB.
OBJECT IDENTIFIER
.1.3.6.1.4.1.5591.1.11.5.4.1.2.1
mpegSupportThese objects describe the support level for MPEG.
Unknown
.1.3.6.1.4.1.5591.1.11.5.4.1.2.1.1
mpegMIBGroupsThe MPEG MIB object groups.
OBJECT IDENTIFIER
.1.3.6.1.4.1.5591.1.11.5.4.1.2.2
mpegInputGroupThe input objects of the MPEG device.
Unknown
.1.3.6.1.4.1.5591.1.11.5.4.1.2.2.1
mpegInputProgESGroupThis table contains information about the elementary streams in a program.
Unknown
.1.3.6.1.4.1.5591.1.11.5.4.1.2.2.2
mpegOutputGroupThe output objects of the MPEG device.
Unknown
.1.3.6.1.4.1.5591.1.11.5.4.1.2.2.3
mpegOutputProgElemStatsGroupThe stats associated with the elementary streams of an MPEG program.
Unknown
.1.3.6.1.4.1.5591.1.11.5.4.1.2.2.4
mpegMappingsGroupThe group of objects describing program mappings within the Device.
Unknown
.1.3.6.1.4.1.5591.1.11.5.4.1.2.2.5
mpegSessionsGroupThe group of objects describing program mappings within the Device.
Unknown
.1.3.6.1.4.1.5591.1.11.5.4.1.2.2.6
SCTE-HMS-MPEG-MIB - SNMP MIB Reference | MIBs Explorer