SALIX-RTP-MIB
The SALIX-RTP-MIB enables monitoring of Real-Time Protocol (RTP) session states and statistics on Salix Networks hardware or software platforms. It provides specific objects to track active RTP session counts, flow parameters, and session lifecycle events for VoIP or multimedia traffic analysis.
Imported Objects
Objects
26 total| Object Name |
|---|
salixRtpMIBThe SALIX-RTP-MIB containts objects for describing
RTP Sessions. MODULE-IDENTITY .1.3.6.1.4.1.2158.5.1.1 |
salixRtpMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2158.5.1.1.1 |
salixRtpStatsTableTable to hold statistics on RTP sessions. For each active
RTP Session, there will be one entry in the table.
NOTE: Retrieval of RTP statistics is an expensive operation.
Please use with care. SEQUENCE OF ItxRtpStatsEntry .1.3.6.1.4.1.2158.5.1.1.1.1 |
salixRtpStatsEntryThis entry lists statistics on a given RTP session. The
session is uniqely identified by the source Ip Address
and port, along with the destination Ip Address and UDP Port. ItxRtpStatsEntry .1.3.6.1.4.1.2158.5.1.1.1.1.1 |
salixRtpStatsSrcIpAddressThe Ip Address for the source side of the RTP session.
Along with the source UDP Port, these objects identify the
RTP session on the source side. Complete identification
of the RTP session also requires a unique identification
on the destination side IpAddress .1.3.6.1.4.1.2158.5.1.1.1.1.1.1 |
salixRtpStatsSrcPortThe UDP Port for the source side of the RTP session.
Along with the source Ip Address, these objects identify the
RTP session on the source side. Complete identification
of the RTP session also requires a unique identification
on the destination side INTEGER .1.3.6.1.4.1.2158.5.1.1.1.1.1.2 |
salixRtpStatsDestIpAddressThe Ip Address for the destination side of the RTP session.
Along with the destination UDP Port, these objects identify the
RTP session on the destination side. Complete identification
of the RTP session also requires a unique identification
on the source side IpAddress .1.3.6.1.4.1.2158.5.1.1.1.1.1.3 |
salixRtpStatsDestPortThe UDP Port for the destination side of the RTP session.
Along with the destination Ip Address, these objects identify the
RTP session on the destination side. Complete identification
of the RTP session also requires a unique identification
on the source side INTEGER .1.3.6.1.4.1.2158.5.1.1.1.1.1.4 |
salixRtpStatsPktsSentThe total number of RTP packets sent during the
specified sessionro Counter32 .1.3.6.1.4.1.2158.5.1.1.1.1.1.5 |
salixRtpStatsPktsRecvThe total number of RTP packets recieved during the
specified sessionro Counter32 .1.3.6.1.4.1.2158.5.1.1.1.1.1.6 |
salixRtpStatsPktsDroppedThe total number of RTP packets dropped during the
specified sessionro Counter32 .1.3.6.1.4.1.2158.5.1.1.1.1.1.7 |
salixRtpStatsBytesSentThe total number of bytes sent during the
specified sessionro Counter32 .1.3.6.1.4.1.2158.5.1.1.1.1.1.8 |
salixRtpStatsBytesRecvThe total number of bytes received during the
specified sessionro Counter32 .1.3.6.1.4.1.2158.5.1.1.1.1.1.9 |
salixRtpStatsBytesDroppedThe total number of bytes dropped during the
specified sessionro Counter32 .1.3.6.1.4.1.2158.5.1.1.1.1.1.10 |
salixRtpStatsSignalPktsSentThe number of signalling packets
sent for the RTP sessionro Counter32 .1.3.6.1.4.1.2158.5.1.1.1.1.1.11 |
salixRtpStatsSignalPktsRecvThe number of signalling packets
received for the RTP sessionro Counter32 .1.3.6.1.4.1.2158.5.1.1.1.1.1.12 |
salixRtpStatsSignalPktsDroppedThe number of signalling packets
dropped for the RTP sessionro Counter32 .1.3.6.1.4.1.2158.5.1.1.1.1.1.13 |
salixRtpStatsSignalBytesRecvThe number of signalling bytes
received for the RTP sessionro Counter32 .1.3.6.1.4.1.2158.5.1.1.1.1.1.14 |
salixRtpStatsAudioPktsRecvThe number of audio packets received
for the specified RTP sessionro Counter32 .1.3.6.1.4.1.2158.5.1.1.1.1.1.15 |
salixRtpStatsAudioBytesRecvThe number of audio bytes received
for the specified RTP sessionro Counter32 .1.3.6.1.4.1.2158.5.1.1.1.1.1.16 |
salixRtpStatsEstimatedAvgLatencyThe Estimated Average Latency for the
RTP sessionro Integer32 .1.3.6.1.4.1.2158.5.1.1.1.1.1.17 |
salixRtpMIBTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2158.5.1.1.2 |
salixRtpMIBTrapPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.2158.5.1.1.2.0 |
salixRtpMIBCompliance OBJECT IDENTIFIER .1.3.6.1.4.1.2158.5.1.1.3 |
salixRtpGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2158.5.1.1.3.1 |
salixRtpCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2158.5.1.1.3.2 |
More MIBs from SALIX
Browse all SALIXMIBs →The SALIX-HNE-MIB provides vendor-specific SNMP extensions for Salix HNE appliances, enabling the monitoring of proprietary hardware states, interface statistics, and system resource utilization not covered by standard MIBs. This module facilitates granular visibility into device health and performance metrics specific to the Salix HNE platform's enterprise networking functions.
SNMP MIB module
The SALIX-SYSTEM-MIB provides SNMP access to error reporting counters and core system status variables for Salix Networks appliances, enabling the monitoring of device health, fault conditions, and operational state metrics.
The SALIX-MGMCP-MIB module provides SNMP visibility into Salix MGMCP (Media Gateway Control Protocol) session states, enabling the monitoring of active call sessions, gateway registration status, and protocol negotiation metrics for media gateway controllers.
The SALIX-INSTALLED-SOFTWARE-MIB exposes SNMP-accessible objects to enumerate and track the specific software packages and their version states installed on SALIX network appliances. This module enables automated inventory auditing and compliance verification by providing granular visibility into the device's software composition.
The SALIX-M4-MIB module extends the standard M4-MIB to monitor and manage specific SALIX networking hardware metrics, including interface statistics, system resources, and device status. This vendor-specific extension enables precise telemetry collection for SALIX M4-series devices within SNMP-managed environments.