SALIX-M4-MIB
AI MIB Summary
The SALIX-M4-MIB module extends the standard M4-MIB to monitor and manage specific SALIX networking hardware metrics, including interface statistics, system resources, and device status. This vendor-specific extension enables precise telemetry collection for SALIX M4-series devices within SNMP-managed environments.
The MIB describing SALIX specific extensions to the M4-MIB
Main OID:
salixM4MIB.1.3.6.1.4.1.2158.2.5
28
Objects
Active
Status
8
Dependencies
Imported Objects
Objects
28 total| Object Name |
|---|
salixM4MIBThe MIB describing SALIX specific extensions
to the M4-MIB MODULE-IDENTITY .1.3.6.1.4.1.2158.2.5 |
salixM4MIBTrapPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.2158.2.5.0 |
salixAtmfM4HwSwDownloadSuccessIndicates that software was successfully downloaded to
the physical entity identified by the entPhysicalIndex.
For a successful download to a 'salixSysSwDownloadEntry'
the physical entity will identify an instance of a
'salixAtmfM4PlugInUnitEntry' that represents the physical
device that received the download. The 'hrSWInstalledIndex'
represents the instance of the 'salixSysSwDownloadEntry'
or download destination on the physical entity.
For a successful download to a 'salixAtmfM4EquipHolderEntry'
the physical entity will identify an instance of a
'salixAtmfM4EquipHolderEntry' that represents the physical
device that received the download. The 'hrSWInstalledIndex'
represents the instance of the 'salixSysHrSWInstalledEntry'
or source of the download. NOTIFICATION-TYPE .1.3.6.1.4.1.2158.2.5.0.1 |
salixAtmfM4PlugInUnitRedundancyPairCreatedIndicates that a 1:1 redundancy pair was created between
two plug-in units. The salixAtmfM4PlugInUnitRedundancyConfig'
objects identify the 'working' and 'protect' plug-in units
configured as the redundant pair. NOTIFICATION-TYPE .1.3.6.1.4.1.2158.2.5.0.2 |
salixAtmfM4PlugInUnitRedundancyPairDestroyedIndicates that the 1:1 redundancy pair between the two
plug-in units identified by the
salixAtmfM4PlugInUnitRedundancyConfig objects was
destroyed. NOTIFICATION-TYPE .1.3.6.1.4.1.2158.2.5.0.3 |
salixAtmfM4PlugInUnitRedundancyPairSwitchoverIndicates a switch from the working plug-in unit of the
redundant pair to the protect partner plug-in unit. The
'salixAtmfM4PlugInUnitRedundancyConfig' objects reflect
the redundancy configuration of the plug-in units after
the switchover. The reason for the switchover is
identified by the 'salixAtmfM4TrapSwitchoverReason' object. NOTIFICATION-TYPE .1.3.6.1.4.1.2158.2.5.0.4 |
salixAtmfM4PlugInUnitRedundancyPairStatusChangeIndicates a change in status of the redundant plug-in unit
pair. The 'salixAtmfM4PlugInUnitRedundancyConfig' objects
reflect the current redundancy configuration of the plug-in
units. The 'salixAtmfM4PlugInUnitRedundancyPairStatus' object
identifies the current status of the redundant plug-in unit
pair. NOTIFICATION-TYPE .1.3.6.1.4.1.2158.2.5.0.5 |
salixM4MIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2158.2.5.1 |
salixAtmfM4EquipHolderTableThe HNE equipment holder table. This table augments the
atmfM4EquipHolderTable defined in the ATM-FORUM-M4-MIB. SEQUENCE OF SalixAtmfM4EquipHolderEntry .1.3.6.1.4.1.2158.2.5.1.2 |
salixAtmfM4EquipHolderEntryAn entry in the HNE equipment holder table. An entry
contains HNE specific equipment holder information not found
in the ATM-FORUM-M4-MIB. SalixAtmfM4EquipHolderEntry .1.3.6.1.4.1.2158.2.5.1.2.1 |
salixAtmfM4EquipHolderDownloadStateThe software download state of the plug-in unit contained
in the equipment holder. This status is only valid if the
equipment holder is a slot. If the equipment holder is not
a slot then the status will be none(1).
none(1) - download not started or not supported
inProgress(2) - download in progress
success(3) - download to plug-in unit successful
aborted(4) - download aborted
failed(5) - download failedro Enumeration .1.3.6.1.4.1.2158.2.5.1.2.1.1 |
salixAtmfM4EquipHolderDownloadStatusMessageStatus message that describes the current state of the
download as indicated by the
'salixAtmfM4EquipHolderDownloadState' attribute.ro OCTET STRING .1.3.6.1.4.1.2158.2.5.1.2.1.2 |
salixAtmfM4PlugInUnitTableThe HNE plug-in unit table. This table augments the
atmfM4PlugInUnitTable defined in the ATM-FORUM-M4-MIB. SEQUENCE OF SalixAtmfM4PlugInUnitEntry .1.3.6.1.4.1.2158.2.5.1.3 |
salixAtmfM4PlugInUnitEntryAn entry in the HNE plug-in unit table. An entry contains HNE
specific plug-in information not found in the ATM-FORUM-M4-MIB. SalixAtmfM4PlugInUnitEntry .1.3.6.1.4.1.2158.2.5.1.3.1 |
salixAtmfM4PlugInUnitSerialNumberThe serial number of the plug-in unit.ro DisplayString .1.3.6.1.4.1.2158.2.5.1.3.1.1 |
salixAtmfM4PlugInUnitTypeThe type of plug-in unit loaded in the slot.ro SalixPlugInUnitType (SALIX-PRODUCT-PLUGIN-MIB) .1.3.6.1.4.1.2158.2.5.1.3.1.2 |
salixAtmfM4PlugInUnitResetThe type of reset to issue to the plug-in unit. The
following types of plug-in units can be reset, 'mpu',
'dpu', 'smu', 'liu' and 'hsf'.
Writing a cold(1) or warm(2) value to this object will
initiate a reset of the plug-in unit. The reset value
will remain until the reset completes. When completed
the reset value will be changed to none(0). The following
are valid reset values:
cold(1) - cold reset initiated
warm(2) - warm reset initiatedrw Enumeration .1.3.6.1.4.1.2158.2.5.1.3.1.3 |
salixAtmfM4PlugInUnitHwRevisionThe hardware revision of the plug-in unit.ro DisplayString .1.3.6.1.4.1.2158.2.5.1.3.1.4 |
salixAtmfM4PlugInUnitLedStatusThe status of the LEDs on the plug-in unit.
The various bit positions are:
1 OK LED is on
2 OK LED is flashing
4 Active LED is on
8 Active LED is flashing
16 Failed LED is on
32 Failed LED is flashingro INTEGER .1.3.6.1.4.1.2158.2.5.1.3.1.5 |
salixAtmfM4PlugInUnitRedundancyConfigWhen retrieved, this attribute represents the current
redundancy configuration of the specified Plug-In Unit. A value
of 'none' indicates that the specified Plug-In Unit has no
redundant module. A status of either 'working' or 'protect'
indicates that the specified Plug-In Unit is either the
working or protect Plug-In Unit in a redundancy relationship.
When used with the 'salixAtmfM4PlugInUnitRedundancyPartnerModule'
attribute of the 'salixAtfM4PlugInUnitTable', it can be
determined which Plug-In Units are in redudancy relationship
and also the plug-in units role in that relationship (if
they are in a relationship at all).
In addition to using these attributes to get information on
redundant modules, these attributes can also be used to
create redundancy relationships. By setting the
'salixAtmfM4PlugInUnitRedundancyPartnerModule' to a valid PhysicalIndex
and also setting the 'salixAtmfM4PlugInUnitRedundancyConfig' on either of
the plug-in units to 'working' or 'protect' (as the desired
configuration for that plug-in unit), a redundancy pair is
created. Redundancy relationships can be destroyed by
setting the 'salixAtmfM4PlugInUnitRedundancyConfig' of either of the
modules to 'none'.
If a new value of either 'working' or 'protect' is written
to the 'salixAtmfM4PlugInUnitRedundancyConfig' attribute, a switchover
occurs in the system (i.e. the 'working' becomes the
'protect' while the 'protect' becomes the 'working).
NOTE: It is only necessary to set the information on one of
the plug-in unit entries. The information will be
automatically set in the other entry by the system.rw Enumeration .1.3.6.1.4.1.2158.2.5.1.3.1.6 |
salixAtmfM4PlugInUnitRedundancyPartnerModuleWhen retrieved, this attributes represents the current
partner module of a pair of plugins that are in redundancy
relationship. This attribute is only valid when the
'salixAtmfM4PlugInUnitRedundancyConfig' attribute is set to
either 'working' or 'protect'.
Writing to this object can either create a redundancy pair
(if one doesn't already exist) or can cause a manual
changeover of the working module (if there is a new value
written).
NOTE: It is only necessary to set the information on one of
plug-in units entries. The information will be
automatically set in the other entry by the system.rw PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2158.2.5.1.3.1.7 |
salixAtmfM4PlugInUnitRedundancyPairStatusThis attribute reflects the status of the redundant
plug-in unit pair:
none(1) - indicates that a 1:1 redundant pair does not exist
with this plug-in unit.
created(2) - indicates that a 1:1 redundant pair was created between
this plug-in unit and the plug-in unit identified
by the 'salixAtmfM4PlugInUnitRedundancyPartnerModule'.
configured(3) indicates that the working module identified by this
1:1 redundant pair is operational.
active(4) - indicates that 1:1 redundancy is active. This
state is entered if both redundant plug-in units
are physically installed with administrative and
operational status as 'up'.ro Enumeration .1.3.6.1.4.1.2158.2.5.1.3.1.8 |
salixAtmfM4PlugInUnitRedundancyStatusMessageStatus message that describes the current state of the
redundant plug-in unit pair.ro OCTET STRING .1.3.6.1.4.1.2158.2.5.1.3.1.9 |
salixAtmfM4TrapSwitchoverReasonThis object identifies the reason for the switchover
that occurred between two plug-in units in a redundant
pair.ro SalixAtmfM4SwitchoverReasons .1.3.6.1.4.1.2158.2.5.1.4 |
salixM4MIBTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2158.2.5.2 |
salixM4MIBCompliance OBJECT IDENTIFIER .1.3.6.1.4.1.2158.2.5.3 |
salixM4Groups OBJECT IDENTIFIER .1.3.6.1.4.1.2158.2.5.3.1 |
salixM4Compliances OBJECT IDENTIFIER .1.3.6.1.4.1.2158.2.5.3.2 |