SALIX-DS1-MIB
The SALIX-DS1-MIB extends the standard DS1-MIB to monitor and manage T1/E1 serial interface statistics, including line status, CRC errors, and framing states, on Salix Networks hardware. This module provides vendor-specific augmentation of DS1 interface objects to enable granular fault detection and performance analysis for TDM circuits.
Imported Objects
Objects
15 total| Object Name |
|---|
salixDsx1MIBThe MIB describing objects relating to DS1 interfaces, specifically
items that augment objects from the DS1-MIB MODULE-IDENTITY .1.3.6.1.4.1.2158.2.7 |
salixDsx1MIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2158.2.7.1 |
salixDsx1ConfigTableThe SALIX DS1 config table This table augments the
dsx1ConfigTable defined in the DS1 MIB. SEQUENCE OF SalixDsx1ConfigEntry .1.3.6.1.4.1.2158.2.7.1.1 |
salixDsx1ConfigEntryAn entry in the SALIX DS1 config table. This entry
containts SALIX specific DS1 configuration objects SalixDsx1ConfigEntry .1.3.6.1.4.1.2158.2.7.1.1.1 |
salixDsx1ContinuityTestTypeThe type of continuity test that should be setup. An entry exists for
every DS1 in the system. This object is
consulted when IPDC is requested to setup a continuity test. Since
this value is specified in SGCP, it is not consulted if the SGCP
protocol is used. Writing to this value has the effect that it changes
the continuity test type for any subsequently setup continuity tests. Any
tests currently in progress are not effected by changing this object.rw Enumeration .1.3.6.1.4.1.2158.2.7.1.1.1.1 |
salixDsx1DChannelPresentAn indication of whether channel 24 of the DS1 is reserved for D channel
signaling.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2158.2.7.1.1.1.2 |
salixDsx1AutoInitiateStateAn indication of whether the D channel data link control (layer 2)
should be initiated automatically during DS1 initialization or
brought up on demand. This attribute is only relevant if
salixDsx1DChannelPresent is 'true'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2158.2.7.1.1.1.3 |
salixDsx1DChannelModeAn indication of whether the D Channel (if present) on the given
DS1 should be configured as 'user mode' or as 'network mode'.
This attributes is only used if the salixDsx1DChannelPresent field
is set to 'true'rw Enumeration .1.3.6.1.4.1.2158.2.7.1.1.1.4 |
salixDsx1RobbedBitSignallingAn indication of whether the 'ABCD' bits of the DS0s in the DS1
should be configured for robbed bit signalling.rw Enumeration .1.3.6.1.4.1.2158.2.7.1.1.1.5 |
salixDsx1TDMEchoCancellationAn indication of whether echo cancellation should be applied
to the DS0s in the DS1.
echoCancel16ms - 16 millisecond echo cancellation tail length
echoCancel32ms - 32 millisecond echo cancellation tail length
echoCancel63ms - 63 millisecond echo cancellation tail lengthrw Enumeration .1.3.6.1.4.1.2158.2.7.1.1.1.7 |
salixDsx1MIBTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2158.2.7.2 |
salixDsx1MIBTrapPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.2158.2.7.2.0 |
salixDsx1MIBCompliance OBJECT IDENTIFIER .1.3.6.1.4.1.2158.2.7.3 |
salixDs1Groups OBJECT IDENTIFIER .1.3.6.1.4.1.2158.2.7.3.1 |
salixDs1Compliances OBJECT IDENTIFIER .1.3.6.1.4.1.2158.2.7.3.2 |
More MIBs from SALIX
Browse all SALIXMIBs →The SALIX-HNE-MIB provides vendor-specific SNMP extensions for Salix HNE appliances, enabling the monitoring of proprietary hardware states, interface statistics, and system resource utilization not covered by standard MIBs. This module facilitates granular visibility into device health and performance metrics specific to the Salix HNE platform's enterprise networking functions.
SNMP MIB module
The SALIX-SYSTEM-MIB provides SNMP access to error reporting counters and core system status variables for Salix Networks appliances, enabling the monitoring of device health, fault conditions, and operational state metrics.
The SALIX-MGMCP-MIB module provides SNMP visibility into Salix MGMCP (Media Gateway Control Protocol) session states, enabling the monitoring of active call sessions, gateway registration status, and protocol negotiation metrics for media gateway controllers.
The SALIX-INSTALLED-SOFTWARE-MIB exposes SNMP-accessible objects to enumerate and track the specific software packages and their version states installed on SALIX network appliances. This module enables automated inventory auditing and compliance verification by providing granular visibility into the device's software composition.
The SALIX-M4-MIB module extends the standard M4-MIB to monitor and manage specific SALIX networking hardware metrics, including interface statistics, system resources, and device status. This vendor-specific extension enables precise telemetry collection for SALIX M4-series devices within SNMP-managed environments.