SALIX-ANNOUNCEMENT-MIB
AI MIB Summary
The SALIX-ANNOUNCEMENT-MIB provides SNMP management objects for configuring and monitoring voice announcement playback, tone generation, and continuity test operations on SALIX network hardware. It exposes specific counters and status indicators for audio stream delivery and link integrity verification within the device's telephony subsystem.
The MIB describing objects relating to Announcements, Tones, and Continuity Tests for SALIX products
Main OID:
salixAnnouncementMIB.1.3.6.1.4.1.2158.2.6
25
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
25 total| Object Name |
|---|
salixAnnouncementMIBThe MIB describing objects relating to Announcements,
Tones, and Continuity Tests for SALIX products MODULE-IDENTITY .1.3.6.1.4.1.2158.2.6 |
salixAnnouncementMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2158.2.6.1 |
salixAnnouncementTableThe announcement download table. This table provides a
mechanism for downloading announcements to the system.
Announcements that are successfully downloaded are installed
on the system and occupy an entry in the salixAnnouncementTable.
An entry in the salixAnnouncementTable exists for each bin on
the system. SEQUENCE OF SalixAnnouncementEntry .1.3.6.1.4.1.2158.2.6.1.1 |
salixAnnouncementEntryAn entry in the salixAnnouncementTable that identifies
the parameters necessary to download announcements to the system. SalixAnnouncementEntry .1.3.6.1.4.1.2158.2.6.1.1.1 |
salixAnnouncementIndexThe unique index (bin) that the announcement is stored in.ro INTEGER .1.3.6.1.4.1.2158.2.6.1.1.1.1 |
salixAnnouncementIpAddressThe Ip Address where the salixAnnouncementFilename
object resides.rw IpAddress .1.3.6.1.4.1.2158.2.6.1.1.1.2 |
salixAnnouncementFilenameThe fully qualified filename found at the specified Ip Address
(salixAnnouncementIpAddress) that is to be downloaded
to the entry in the Table.rw DisplayString .1.3.6.1.4.1.2158.2.6.1.1.1.3 |
salixAnnouncementUsernameThe username to be used when getting a file from the
computer at the IP address indicated by the
salixAnnouncementIpAddress attribute. For security
reasons, reading this field will return an empty string.rw DisplayString .1.3.6.1.4.1.2158.2.6.1.1.1.4 |
salixAnnouncementPasswordThe password to be used when getting a file from the
computer at the IP address indicated by the
salixAnnouncementIpAddress attribute. For security
reasons, reading this field will return an empty string.rw DisplayString .1.3.6.1.4.1.2158.2.6.1.1.1.5 |
salixAnnouncementRequestThe announcement request for this row. Writing values to
this object has the following side effects (depending on
the value written:
none(0) - no effect. Default value for this object.
start(1) - start the FTP download and installation
for the given announcement file.
update(2) - Do not start the FTP download, just update
system with the given version of
the announcement that already exists.rw Enumeration .1.3.6.1.4.1.2158.2.6.1.1.1.6 |
salixAnnouncementStateThe state of the download software request.
none(1) - download not started or not supported
inProgress(2) - download in progress
success(3) - download to the announcement table was
successful.
aborted(4) - download aborted
failed(5) - download to at least one plug-in unit failed
locked(6) - the filename in the installed software entry
is locked by the management processor software.
installInProgress(7) - the bin is currently being installed to
modules in the system and is not available
for downloadro Enumeration .1.3.6.1.4.1.2158.2.6.1.1.1.7 |
salixAnnouncementDescriptionA Description for the announcement. Should be something
that uniqely describes this announcement on the system,
so that the operator can determine the difference between
all the installed announcements on the systemrw DisplayString .1.3.6.1.4.1.2158.2.6.1.1.1.8 |
salixAnnouncementInstallThe time the announcement was installed on the system. This time is
acutally the time that the download completes.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2158.2.6.1.1.1.9 |
salixAnnouncementFullThis value indicates whether the announcement bin is full or not.
True: an announcement file is present in this bin
False: no announcement file is present in this binro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2158.2.6.1.1.1.10 |
salixAnnouncementStatusMessageStatus message that describes the current state of the
download as indicated by the 'salixAnnouncementState'
attribute.ro OCTET STRING .1.3.6.1.4.1.2158.2.6.1.1.1.11 |
salixAnnouncementMappingTableThe announcement mapping table is used to map salixAnnouncementIndex
[bins] to the entPhysicalIndex that the announcement is installed on.
When used in conjunction with the salixAnnouncementTable, it can be seen
which boards in the system contain which announcements.
An entry in this table exists for each announcement on each board
that the announcement is installed on. SEQUENCE OF SalixAnnouncementMappingEntry .1.3.6.1.4.1.2158.2.6.1.2 |
salixAnnouncementMappingEntryAn entry in the salixAnnouncementMappingEntry that maps
an salixAnnouncementIndex to an entPhysicalIndex. SalixAnnouncementMappingEntry .1.3.6.1.4.1.2158.2.6.1.2.1 |
salixAnnouncementMappingStatusDescribes the current state of the announcement on the board
in the system.
ready (1) - The announcement is installed
on the board and ready for use
downloadInProgress(2) - The announcement is being installed
on the board and is not ready for usero Enumeration .1.3.6.1.4.1.2158.2.6.1.2.1.1 |
salixAnnouncementMIBTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2158.2.6.2 |
salixAnnouncementMIBTrapPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.2158.2.6.2.0 |
salixAnnouncementInstallFailureIndicates thats the installation of the announcement
has failed. This notification is generated when the
salixAnnouncementState for this download transitions
from inProgress to failed. The default alarm severity
for this alarm is 'major'. NOTIFICATION-TYPE .1.3.6.1.4.1.2158.2.6.2.0.1 |
salixAnnouncementInstallSuccessIndicates thats the installation of the announcement to
all the Transcoders have succeeded. This notification
is generated when the salixAnnouncementState for the
download transitions from inProgress to success. The
default alarm severity for this alarm is 'minor'. NOTIFICATION-TYPE .1.3.6.1.4.1.2158.2.6.2.0.2 |
salixAnnouncementMIBCompliance OBJECT IDENTIFIER .1.3.6.1.4.1.2158.2.6.3 |
salixAnnouncementGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2158.2.6.3.1 |
salixAnnouncementCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2158.2.6.3.2 |