SAFEGUARD-ENGINE-MIB
The SAFEGUARD-ENGINE-MIB facilitates the monitoring and management of CPU protection mechanisms on network hardware, specifically tracking CPU utilization thresholds, protection state transitions, and trigger events to prevent processor overload.
Imported Objects
Objects
14 total| Object Name |
|---|
swSafeGuardMIBThe MIB module for managing CPU protection. MODULE-IDENTITY .1.3.6.1.4.1.171.12.19 |
swSafeGuardGblMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.171.12.19.1 |
swSafeGuardAdminStateThis object indicates the Safe Guard state of the switch.rw Enumeration .1.3.6.1.4.1.171.12.19.1.1 |
swSafeGuardctrl OBJECT IDENTIFIER .1.3.6.1.4.1.171.12.19.2 |
swSafeGuardRisingThresholdThe object indicates CPU protection rising threshold in percentage. the range is between 20%-100% , if the CPU utilization is over the rising threshold, the switch enters exhausted mode.rw INTEGER .1.3.6.1.4.1.171.12.19.2.1 |
swSafeGuardFallingThresholdThe object indicates CPU protection falling threshold in percentage. the range is between 20%-100% , if the CPU utilization is lower than the falling threshold, the switch enters normal mode.rw INTEGER .1.3.6.1.4.1.171.12.19.2.2 |
swSafeGuardAlarmAdminStateThis object indicates the state of cpu protection related trap/log mechanism (enable or disable). If set to enable, trap and log will be active while cpu protection current mode changed.If set to disable, current mode change will not trigger trap and log events.rw Enumeration .1.3.6.1.4.1.171.12.19.2.4 |
swSafeGuardCurrentStatusThis object indicates current operation mode of Safe Guardro Enumeration .1.3.6.1.4.1.171.12.19.2.5 |
swSafeGuardIntervalThe object indicates CPU utilization monitor interval in seconds. The range is between 5 to 10, default value is 5.ro INTEGER .1.3.6.1.4.1.171.12.19.2.6 |
swSafeGuardNotify OBJECT IDENTIFIER .1.3.6.1.4.1.171.12.19.4 |
swSafeGuardNotification OBJECT IDENTIFIER .1.3.6.1.4.1.171.12.19.4.1 |
swSafeGuardNotifyPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.171.12.19.4.1.0 |
swSafeGuardChgToExhaustedThis trap indicates System change operation mode from normal to exhausted. NOTIFICATION-TYPE .1.3.6.1.4.1.171.12.19.4.1.0.1 |
swSafeGuardChgToNormalThis trap indicates System change operation mode from exhausted to normal. NOTIFICATION-TYPE .1.3.6.1.4.1.171.12.19.4.1.0.2 |
More MIBs from D-Link
Browse all D-LinkMIBs →SNMP MIB module
The DGS-1210-12TSME-BX MIB module provides management capabilities for the D-Link DES-1210-52ME switch, specifically enabling the monitoring and configuration of QinQ (802.1ad) VLAN encapsulation parameters, including inner tag insertion and drop counters for unmatched traffic. This module facilitates precise control over service provider bridging (SPB) operations by exposing metrics related to VLAN tag manipulation and packet discard events on the device's managed ports.
SNMP MIB module
Standard SNMP MIB module defining data structures for DGS-1210-28PME_AX.
Standard SNMP MIB module defining data structures for DGS-1210-28ME_AX.
Standard SNMP MIB module defining data structures for DGS-1210-20ME_AX.