SA-MTA-MIB
The SA-MTA-MIB module manages Location-Based Services (LCS) signaling parameters within the SA-MTA (Session Agent - Mobile Terminating Agent) infrastructure, specifically controlling the `saMtaDevLCSSignalingSupport` object to regulate location request routing and delivery protocols. This MIB enables administrators to monitor and configure the signaling state of LCS sessions, ensuring proper interaction between location servers and mobile network elements for emergency and commercial location services.
Imported Objects
Objects
11 total| Object Name |
|---|
sa OBJECT IDENTIFIER .1.3.6.1.4.1.1429 |
saVoip OBJECT IDENTIFIER .1.3.6.1.4.1.1429.78 |
saMtasaMtaDevLCSSignalingSupport controls the LCS Signaling. MODULE-IDENTITY .1.3.6.1.4.1.1429.78.3 |
saMtaDevice OBJECT IDENTIFIER .1.3.6.1.4.1.1429.78.3.1 |
saMtaDevOffHookWarnTOBusyThis object configures whether an endpoint should ring off-hook warning tone. When this feature is disabled(0), Endpoint should ring off-hook warning tone. When this feature is enabled(1), Endpoint should ring busy tone instead of off-hook warning tone. The default value of this object is disabled(0).rw Enumeration .1.3.6.1.4.1.1429.78.3.1.61 |
saMtaEndPointTableThis table describes the MTA EndPoint Volume configuration. SEQUENCE OF SaMtaEndPointEntry .1.3.6.1.4.1.1429.78.3.2 |
saMtaEndPointEntryList of attributes for a single MTA endpoint interface. SaMtaEndPointEntry .1.3.6.1.4.1.1429.78.3.2.1 |
saMtaEndPntHookFlashMinTimeShortest onhook time at which hook-flash event will be detected, in miliseconds. Breaks in loop current with shorter duration are assumed to be noise and are ignored.rw INTEGER .1.3.6.1.4.1.1429.78.3.2.1.1 |
saMtaEndPntHookFlashMaxTimeLongest onhook time at which hook-flash event will be detected, in miliseconds. If onhook time is longer then saMtaHookFlashMaxTime, hang up event will be detected.rw INTEGER .1.3.6.1.4.1.1429.78.3.2.1.2 |
saMtaEndPntStatePhysicalReturns the physical state of the end point. 1: No phones attached or one or more phones are attached and on-hook 2: One or more phones are attached and off-hookro Enumeration .1.3.6.1.4.1.1429.78.3.2.1.6 |
saMtaEndPntStateLogicalReturns the logical state of the end point. 1: endpoint is connected to CMS and not in call 2: endpoint is not connected to CMS 3: endpoint is in voice mode call 4: endpoint is in data mode (fax/modem) callro Enumeration .1.3.6.1.4.1.1429.78.3.2.1.7 |
More MIBs from Cisco
Browse all CiscoMIBs →The CISCO-ENTITY-VENDORTYPE-OID-MIB maps Cisco-specific hardware component identifiers to the ENTITY-MIB's entPhysicalTable, enabling precise differentiation of physical device types such as line cards, power supplies, and fans within Cisco infrastructure. This mapping ensures that SNMP management systems can accurately correlate physical inventory entries with vendor-specific component definitions for accurate device discovery and monitoring.
The CISCO-UNIFIED-COMPUTING-EQUIPMENT-MIB provides SNMP-based monitoring and management of Cisco Unified Computing System (UCS) hardware components, including chassis, blades, fabric interconnects, and power supplies. It exposes critical operational metrics such as device status, port states, temperature readings, fan speeds, and power consumption data for infrastructure health assessment.
The CISCO-UNIFIED-COMPUTING-ADAPTOR-MIB enables SNMP-based monitoring and management of physical and virtual network adapter interfaces, including link status, traffic counters, error statistics, and port configuration parameters, within the Cisco Unified Computing System (UCS) fabric interconnects and blade servers.
The CISCO-UNIFIED-COMPUTING-TC-MIB module defines standard textual conventions and data type definitions required for monitoring Cisco Unified Computing System (UCS) hardware components, including server blades, fabric interconnects, and chassis resources. These definitions enable consistent interpretation of specific UCS metrics such as power supply status, fan speeds, thermal readings, and port utilization across SNMP management applications.
The CISCO-UNIFIED-COMPUTING-FABRIC-MIB enables SNMP-based monitoring and management of the Cisco UCS Fabric Interconnects and associated fabric switching infrastructure, exposing metrics for port states, link utilization, error counters, and fabric topology status. It facilitates granular visibility into the physical and logical fabric layers, including uplink/downlink interfaces, VLAN configurations, and fabric failover conditions within the unified computing environment.
The STARENT-MIB module provides SNMP management and monitoring capabilities for Cisco ASR 5000 and ASR 5500 multimedia core platforms, specifically exposing metrics related to 2G/3G/4G and WiFi subscriber sessions, inline service states, and carrier-class high-availability status.