ROSMGMT-OSPFV2-MIB
AI MIB Summary
The ROSMGMT-OSPFV2-MIB module provides SNMP objects for monitoring and managing Open Shortest Path First version 2 (OSPFv2) routing protocol parameters, including neighbor adjacency states, interface metrics, and link-state database statistics on MikroTik RouterOS devices.
This MIB module defines objects to Ospf.
Main OID:
rosMgmtOspf.47
312
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
312 total| Object Name |
|---|
rosMgmtOspfThis MIB module defines objects to Ospf. MODULE-IDENTITY .47 |
rosMgmtOspfNotifications OBJECT IDENTIFIER .47.1 |
rosMgmtOspfTraps OBJECT IDENTIFIER .47.1.0 |
rosMgmtOspfIfStateChangeAn rosMgmtOspfIfStateChange trap signifies that there
has been a change in the state of a non-virtual
OSPF interface. This trap should be generated
when the interface state regresses (e.g., goes
from Dr to Down) or progresses to a terminal
state (i.e., Point-to-Point, DR Other, Dr, or
Backup). NOTIFICATION-TYPE .47.1.0.1 |
rosMgmtOspfVirtIfStateChangeAn rosMgmtOspfIfStateChange trap signifies that there
has been a change in the state of an OSPF vir-
tual interface.
This trap should be generated when the inter-
face state regresses (e.g., goes from Point-
to-Point to Down) or progresses to a terminal
state (i.e., Point-to-Point). NOTIFICATION-TYPE .47.1.0.2 |
rosMgmtOspfNbrStateChangeAn rosMgmtOspfNbrStateChange trap signifies that
there has been a change in the state of a non-
virtual OSPF neighbor. This trap should be
generated when the neighbor state regresses
(e.g., goes from Attempt or Full to 1-Way or
Down) or progresses to a terminal state (e.g.,
2-Way or Full). When an neighbor transitions
from or to Full on non-broadcast multi-access
and broadcast networks, the trap should be gen-
erated by the designated router. A designated
router transitioning to Down will be noted by
rosMgmtOspfIfStateChange. NOTIFICATION-TYPE .47.1.0.3 |
rosMgmtOspfVirtNbrStateChangeAn rosMgmtOspfIfStateChange trap signifies that there
has been a change in the state of an OSPF vir-
tual neighbor. This trap should be generated
when the neighbor state regresses (e.g., goes
from Attempt or Full to 1-Way or Down) or
progresses to a terminal state (e.g., Full). NOTIFICATION-TYPE .47.1.0.4 |
rosMgmtOspfIfConfigErrorAn rosMgmtOspfIfConfigError trap signifies that a
packet has been received on a non-virtual in-
terface from a router whose configuration
parameters conflict with this router's confi-
guration parameters. Note that the event op-
tionMismatch should cause a trap only if it
prevents an adjacency from forming. NOTIFICATION-TYPE .47.1.0.5 |
rosMgmtOspfVirtIfConfigErrorAn ospfConfigError trap signifies that a pack-
et has been received on a virtual interface
from a router whose configuration parameters
conflict with this router's configuration
parameters. Note that the event optionMismatch
should cause a trap only if it prevents an ad-
jacency from forming. NOTIFICATION-TYPE .47.1.0.6 |
rosMgmtOspfIfAuthFailureAn rosMgmtOspfIfAuthFailure trap signifies that a
packet has been received on a non-virtual in-
terface from a router whose authentication key
or authentication type conflicts with this
router's authentication key or authentication
type. NOTIFICATION-TYPE .47.1.0.7 |
rosMgmtOspfVirtIfAuthFailureAn rosMgmtOspfVirtIfAuthFailure trap signifies that a
packet has been received on a virtual interface
from a router whose authentication key or au-
thentication type conflicts with this router's
authentication key or authentication type. NOTIFICATION-TYPE .47.1.0.8 |
rosMgmtOspfIfRxBadPacketAn rosMgmtOspfIfRxBadPacket trap signifies that an
OSPF packet has been received on a non-virtual
interface that cannot be parsed. NOTIFICATION-TYPE .47.1.0.9 |
rosMgmtOspfVirtIfRxBadPacketAn ospfRxBadPacket trap signifies that an OSPF
packet has been received on a virtual interface
that cannot be parsed. NOTIFICATION-TYPE .47.1.0.10 |
rosMgmtOspfTxRetransmitAn ospfTxRetransmit trap signifies than an
OSPF packet has been retransmitted on a non-
virtual interface. All packets that may be re-
transmitted are associated with an LSDB entry.
The LS type, LS ID, and Router ID are used to
identify the LSDB entry. NOTIFICATION-TYPE .47.1.0.11 |
rosMgmtOspfVirtIfTxRetransmitAn ospfTxRetransmit trap signifies than an
OSPF packet has been retransmitted on a virtual
interface. All packets that may be retransmit-
ted are associated with an LSDB entry. The LS
type, LS ID, and Router ID are used to identify
the LSDB entry. NOTIFICATION-TYPE .47.1.0.12 |
rosMgmtOspfOriginateLsaAn ospfOriginateLsa trap signifies that a new
LSA has been originated by this router. This
trap should not be invoked for simple refreshes
of LSAs (which happesn every 30 minutes), but
instead will only be invoked when an LSA is
(re)originated due to a topology change. Addi-
tionally, this trap does not include LSAs that
are being flushed because they have reached
MaxAge. NOTIFICATION-TYPE .47.1.0.13 |
rosMgmtOspfMaxAgeLsaAn ospfMaxAgeLsa trap signifies that one of
the LSA in the router's link-state database has
aged to MaxAge. NOTIFICATION-TYPE .47.1.0.14 |
rosMgmtOspfLsdbOverflowAn rosMgmtOspfLsdbOverflow trap signifies that the
number of LSAs in the router's link-state data-
base has exceeded rosMgmtOspfExtLsdbLimit. NOTIFICATION-TYPE .47.1.0.15 |
rosMgmtOspfLsdbApproachingOverflowAn rosMgmtOspfLsdbApproachingOverflow trap signifies
that the number of LSAs in the router's link-
state database has exceeded ninety percent of
rosMgmtOspfExtLsdbLimit. NOTIFICATION-TYPE .47.1.0.16 |
rosMgmtOspfIfKeyValidThis trap will notify the network manager that some key
associated with an interface recovers valid. NOTIFICATION-TYPE .47.1.0.17 |
rosMgmtOspfIfLastKeyExpirationThis trap will notify the network manager that the last
key associated with an interface expires. NOTIFICATION-TYPE .47.1.0.18 |
rosMgmtOspfVirtIfKeyValidThis trap will notify the network manager that some key
associated with an virtual link recovers valid. NOTIFICATION-TYPE .47.1.0.19 |
rosMgmtOspfVirtIfLastKeyExpirationThis trap will notify the network manager that the last
key associated with an virtual link expires. NOTIFICATION-TYPE .47.1.0.20 |
rosMgmtOspfRedistributeOverflowThis trap should be generated when the number of
redistribute routes exceeds limit. NOTIFICATION-TYPE .47.1.0.21 |
rosMgmtOspfRedistributeNotOverflowThis trap should be generated when the number of
redistribute routes drop to limit. NOTIFICATION-TYPE .47.1.0.22 |
rosMgmtOspfTrapControlTableThe table enable or disable ospf traps SEQUENCE OF RosMgmtOspfTrapControlEntry .47.1.1 |
rosMgmtOspfTrapControlEntryDefine an entry in the rosMgmtOspfTrapControl.
Information in this table is persistent and when this object
is written the entity SHOULD save the change to non-volatile
storage. RosMgmtOspfTrapControlEntry .47.1.1.1 |
rosMgmtOspfSetTrapWhether the Device shoule send traps.rw EnableVar (SWITCH-TC) .47.1.1.1.1 |
rosMgmtOspfConfigErrorTypePotential types of configuration conflicts.
Used by the ospfConfigError and ospfConfigVir-
tError traps.ro Enumeration .47.1.1.1.2 |
rosMgmtOspfPacketTypeOSPF packet types.ro Enumeration .47.1.1.1.3 |
rosMgmtOspfPacketSrcThe IP address of an inbound packet that can-
not be identified by a neighbor instance.ro IpAddress .47.1.1.1.4 |
rosMgmtOspfObjects OBJECT IDENTIFIER .47.2 |
rosMgmtOspfGlobalTableOSPF global Vars for every ospf process. SEQUENCE OF RosMgmtOspfGlobalEntry .47.2.1 |
rosMgmtOspfGlobalEntryOSPF global Vars for every ospf process. RosMgmtOspfGlobalEntry .47.2.1.1 |
rosMgmtOspfProcessIdA 32-bit unsigned integer uniquely identifying the
ospf process.ro ProcessID .47.2.1.1.1 |
rosMgmtOspfRouterIdA 32-bit integer uniquely identifying the
router in the Autonomous System.
By convention, to ensure uniqueness, this
should default to the value of one of the
router's IP interface addresses.
This object is persistent and when written
the entity SHOULD save the change to non-volatile storage.rw RouterID .47.2.1.1.2 |
rosMgmtOspfAdminStatThe administrative status of OSPF in the
router. The value 'enabled' denotes that the
OSPF Process is active on at least one interface;
'disabled' disables it on all interfaces.
This object is persistent and when written
the entity SHOULD save the change to non-volatile storage.ro EnableVar (SWITCH-TC) .47.2.1.1.3 |
rosMgmtOspfVersionNumberThe current version number of the OSPF protocol is 2.ro Enumeration .47.2.1.1.4 |
rosMgmtOspfAreaBdrRtrStatusA flag to note whether this router is an Area
Border Router.ro TruthValue (SNMPv2-TC) .47.2.1.1.5 |
rosMgmtOspfASBdrRtrStatusA flag to note whether this router is configured as
an Autonomous System Border Router.
This object is persistent and when written the
entity SHOULD save the change to non-volatile storage.ro TruthValue (SNMPv2-TC) .47.2.1.1.6 |
rosMgmtOspfExternLsaCountThe number of external (LS type-5) link state
advertisements in the link state database.ro Gauge32 .47.2.1.1.7 |
rosMgmtOspfExternLsaCksumSumThe 32-bit sum of the LS checksums of
the external link state advertisements
contained in the link state database. This sum
can be used to determine if there has been a
change in a router's link state database and
to compare the link state database of two
routers. The value should be treated as unsigned
when comparing two sums of checksums.ro Integer32 .47.2.1.1.8 |
rosMgmtOspfOriginateNewLsasThe number of new link state advertisements
that have been originated. This number is
incremented each time the router originates a new
LSA.
Discontinuities in the value of this counter can
occur at re-initialization of the management system,
and at other times as indicated by the value of
ospfDiscontinuityTime.ro Counter32 .47.2.1.1.9 |
rosMgmtOspfRxNewLsasThe number of link state advertisements received
that are determined to be new instantiations.
This number does not include newer instantiations
of self-originated link state advertisements.
Discontinuities in the value of this counter can
occur at re-initialization of the management system,
and at other times as indicated by the value of
ospfDiscontinuityTime.ro Counter32 .47.2.1.1.10 |
rosMgmtOspfExtLsdbLimitThe maximum number of non-default
AS-external LSAs entries that can be stored in the
link state database. If the value is -1, then
there is no limit.
When the number of non-default AS-external LSAs
in a router's link state database reaches
rosMgmtOspfExtLsdbLimit, the router enters
overflow state. The router never holds more than
rosMgmtOspfExtLsdbLimit non-default AS-external LSAs
in its database. rosMgmtOspfExtLsdbLimit MUST be set
identically in all routers attached to the OSPF
backbone and/or any regular OSPF area (i.e.,
OSPF stub areas and NSSAs are excluded).
This object is persistent and when written
the entity SHOULD save the change to non-volatile
storage.ro Integer32 (-1..'7FFFFFFF'h) .47.2.1.1.11 |
rosMgmtOspfExitOverflowIntervalThe number of seconds that, after entering
OverflowState, a router will attempt to leave
OverflowState. This allows the router to again
originate non-default AS-external LSAs. When
set to 0, the router will not leave
overflow state until restarted.
This object is persistent and when written
the entity SHOULD save the change to non-volatile
storage.ro PositiveInteger .47.2.1.1.12 |
rosMgmtOspfReferenceBandwidthReference bandwidth in millionbits/second for
calculating default interface metrics. The
default value is 100 MBPS.
This object is persistent and when written
the entity SHOULD save the change to non-volatile
storage.rw Unsigned32 .47.2.1.1.13 |
rosMgmtOspfAsLsaCountThe number of AS-scope link state
advertisements in the AS-scope link state database.ro Gauge32 .47.2.1.1.14 |
rosMgmtOspfAsLsaCksumSumThe 32-bit unsigned sum of the LS checksums of
the AS link state advertisements contained in the AS-scope
link state database. This sum can be used to determine
if there has been a change in a router's AS-scope link
state database, and to compare the AS-scope link state
database of two routers.ro Unsigned32 .47.2.1.1.15 |
rosMgmtOspfStubRouterSupportThe router's support for stub router functionality.ro TruthValue (SNMPv2-TC) .47.2.1.1.16 |
rosMgmtOspfStubRouterAdvertisementThis object controls the advertisement of
stub router LSAs by the router. The value
doNotAdvertise will result in the advertisement
of a standard router LSA and is the default value.
This object is persistent and when written
the entity SHOULD save the change to non-volatile
storage.ro Enumeration .47.2.1.1.17 |
rosMgmtOspfAdminDistanceThe administrative distance of ospf process. 0 represents
administration distance of ospf is not set.rw Integer32 .47.2.1.1.18 |
rosMgmtOspfSpfIntervalDelay(s) between receiving a change to SPF calculation.rw Integer32 .47.2.1.1.19 |
rosMgmtOspfResetReset ospf process by process ID.rw Enumeration .47.2.1.1.20 |
rosMgmtOspfExportMetricThe default metric of imporing route into ospf process.rw Integer32 (0.. 16777215) .47.2.1.1.21 |
rosMgmtOspfExportTagThe default tag of importing route into ospf process.rw Integer32 .47.2.1.1.22 |
rosMgmtOspfExportTypeThe default type of importing route into ospf process.rw Enumeration .47.2.1.1.23 |
rosMgmtOspfNetCountsIt bas been used to describe the total number of networks in OSPF process.ro Integer32 .47.2.1.1.24 |
rosMgmtOspfAreaCountsIt bas been used to describe the number of areas in OSPF process.ro Integer32 .47.2.1.1.25 |
rosMgmtOspfNssaAreaCountsIt bas been used to describe the number of NSSA areas in OSPF process.ro Integer32 .47.2.1.1.26 |
rosMgmtOspfSpfCountsIt bas been used to describe the total number of SPF calculation in OSPF process.ro Integer32 .47.2.1.1.27 |
rosMgmtOspfGlobalStatusThis object permits management of the table by
facilitating actions such as row creation,
construction, and destruction.
The value of this object has no effect on
whether other objects in this conceptual row can be
modified.rw RowStatus (SNMPv2-TC) .47.2.1.1.28 |
rosMgmtOspfRedistributeRouteLimitSpecify the max number in importing route.-1 represents
the max number in importing route are not set.rw Integer32(-1|1..65535) .47.2.1.1.29 |
rosMgmtOspfDistanceIntraThe administrative distance of ospf Intra-area routes. 0 represents
administration distance of ospf Intra-area routes are not set.rw Integer32 .47.2.1.1.30 |
rosMgmtOspfDistanceInterThe administrative distance of ospf Inter-area routes. 0 represents
administration distance of ospf Inter-area routes are not set.rw Integer32 .47.2.1.1.31 |
rosMgmtOspfDistanceExternThe administrative distance of ospf external routes. 0 represents
administration distance of ospf external routes are not set.rw Integer32 .47.2.1.1.32 |
rosMgmtOspfRfc1583Compatibleospf process compatible with RFC 1583.rw TruthValue (SNMPv2-TC) .47.2.1.1.33 |
rosMgmtOspfSpfHodeHold time (s) between consecutive SPF calculations.rw Integer32 .47.2.1.1.34 |
rosMgmtOspfBfdAllItfsOspf process indicate global BFD.rw TruthValue (SNMPv2-TC) .47.2.1.1.35 |
rosMgmtOspfOpaqueCapabilityOspf process indicate opaque capability.rw TruthValue (SNMPv2-TC) .47.2.1.1.36 |
rosMgmtOspfTECapabilityOspf process indicate TE capability.ro TruthValue (SNMPv2-TC) .47.2.1.1.37 |
rosMgmtOspfTEAreaIDA 32-bit integer uniquely identifying an area.
Area ID 0.0.0.0 is used for the OSPF backbone.rodeprecated IpAddress .47.2.1.1.38 |
rosMgmtOspfTERouterIdA 32-bit integer uniquely identifying the
TE router in the area.By convention,
to ensure uniqueness,this should default to
the value of the router-id of ospf precess.rw RouterID .47.2.1.1.39 |
rosMgmtOspfGRCapabilityUse this command to enable OSPF graceful restart
or restart signaling. If a router is not restart-enabled,
it cannot enter graceful restart mode and act as a helper.rw Enumeration .47.2.1.1.40 |
rosMgmtOspfGRPeriodThe grace period for the restarting router.rw Integer32 .47.2.1.1.41 |
rosMgmtOspfGRHelperthe helper behavior for graceful restart.rw Enumeration .47.2.1.1.42 |
rosMgmtOspfGRHelperMaxPeriodHelp only if received grace-period is less than this value.rw Integer32 .47.2.1.1.43 |
rosMgmtOspfMaximumLoadBalancingMaximum load-balancing paths for OSPF.rw Integer32 .47.2.1.1.44 |
rosMgmtOspfMaxMetricThe router announces itself as a stub router.rw Integer32 .47.2.1.1.45 |
rosMgmtOspfMaxMetricTypeThe stub router will change the cost include stub link.rw Integer32 .47.2.1.1.46 |
rosMgmtOspfMaxMetricTimeTime, in seconds, router-LSAs are originated with max-metric.rw Integer32 (0 | 90..86400) .47.2.1.1.47 |
rosMgmtOspfMaxMetricTypeStartupSet maximum metric for stub links in router-LSAs on start up.rw Integer32 .47.2.1.1.48 |
rosMgmtOspfLsdbOverflowLimitSet the OSPF link-state database overflow limit.rw Integer32 .47.2.1.1.49 |
rosMgmtOspfTrafficAdjustTypeSet the OSPF traffic adjust feature.rw Enumeration .47.2.1.1.50 |
rosMgmtOspfRouteTagValueSet tag of the import route whcih belongs to the vpn process.rw Unsigned32 .47.2.1.1.51 |
rosMgmtOspfRouteTagCheckDisableBlock the inclusion of Tag whcih belongs to the vpn process.rw TruthValue (SNMPv2-TC) .47.2.1.1.52 |
rosMgmtOspfDNBitSetDisableSummaryConfigure the DN bit in an Summary LSA. The DN bit is set in an Summary LSA by default.rw TruthValue (SNMPv2-TC) .47.2.1.1.53 |
rosMgmtOspfDNBitSetDisableAseConfigure the DN bit in an as-external-LSA. The DN bit is set in an as-external-LSA by default.rw TruthValue (SNMPv2-TC) .47.2.1.1.54 |
rosMgmtOspfDNBitSetDisableNssaConfigure the DN bit in an Nssa LSA. The DN bit is set in an Nssa LSA by default.rw TruthValue (SNMPv2-TC) .47.2.1.1.55 |
rosMgmtOspfDNBitCheckDisableSummaryCheck the DN bit in an Summary LSA. The DN bit check is enabled in an Summary LSA by default.rw TruthValue (SNMPv2-TC) .47.2.1.1.56 |
rosMgmtOspfDNBitCheckDisableAseCheck the DN bit in an an as-external-LSA. The DN bit check is enabled in an an as-external-LSA by default.rw TruthValue (SNMPv2-TC) .47.2.1.1.57 |
rosMgmtOspfDNBitCheckDisableNssaCheck the DN bit in an Nssa LSA. The DN bit check is enabled in an Nssa LSA by default.rw TruthValue (SNMPv2-TC) .47.2.1.1.58 |
rosMgmtOspfSpfMilliIntervalDelay(ms) between receiving a change to SPF calculation.rw Integer32 .47.2.1.1.59 |
rosMgmtOspfSpfMilliHodeHold time (ms) between consecutive SPF calculations.rw Integer32 .47.2.1.1.60 |
rosMgmtOspfLoopFreeAltEnable OSPF Loop-Free Alternate(LFA).rw TruthValue (SNMPv2-TC) .47.2.1.1.61 |
rosMgmtOspfAreaTableInformation describing the configured parameters and
cumulative statistics of the router's attached areas.
The interfaces and virtual links are configured
as part of these areas. Area 0.0.0.0, by definition,
is the backbone area. SEQUENCE OF RosMgmtOspfAreaEntry .47.2.2 |
rosMgmtOspfAreaEntryInformation describing the configured parameters and
cumulative statistics of one of the router's attached areas.
The interfaces and virtual links are configured as part of
these areas. Area 0.0.0.0, by definition, is the backbone
area.
Information in this table is persistent and when this object
is written the entity SHOULD save the change to non-volatile
storage. RosMgmtOspfAreaEntry .47.2.2.1 |
rosMgmtOspfAreaIdA 32-bit integer uniquely identifying an area.
Area ID 0.0.0.0 is used for the OSPF backbone. AreaID .47.2.2.1.1 |
rosMgmtOspfAuthTypeThe authentication type specified for an area.rw OspfAuthenticationType .47.2.2.1.2 |
rosMgmtOspfImportAsExternIndicates if an area is a stub area, NSSA, or standard
area. Type-5 AS-external LSAs and type-11 Opaque LSAs are
not imported into stub areas or NSSAs. NSSAs import
AS-external data as type-7 LSAsro Enumeration .47.2.2.1.3 |
rosMgmtOspfSpfRunsThe number of times that the intra-area route
table has been calculated using this area's
link state database. This is typically done
using Dijkstra's algorithm.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at other
times as indicated by the value of ospfDiscontinuityTime.ro Counter32 .47.2.2.1.4 |
rosMgmtOspfAreaBdrRtrCountThe total number of Area Border Routers reachable
within this area. This is initially zero and is
calculated in each Shortest Path First (SPF) pass.ro Gauge32 .47.2.2.1.5 |
rosMgmtOspfAsBdrRtrCountThe total number of Autonomous System Border
Routers reachable within this area. This is
initially zero and is calculated in each SPF
pass.ro Gauge32 .47.2.2.1.6 |
rosMgmtOspfAreaLsaCountThe total number of link state advertisements
in this area's link state database, excluding
AS-external LSAs.ro Gauge32 .47.2.2.1.7 |
rosMgmtOspfAreaLsaCksumSumThe 32-bit sum of the link state
advertisements' LS checksums contained in this
area's link state database. This sum excludes
external (LS type-5) link state advertisements.
The sum can be used to determine if there has
been a change in a router's link state
database, and to compare the link state database of
two routers. The value should be treated as unsigned
when comparing two sums of checksums.ro Integer32 .47.2.2.1.8 |
rosMgmtOspfAreaSummaryThe variable ospfAreaSummary controls the
import of summary LSAs into stub and NSSA areas.
It has no effect on other areas.
If it is noAreaSummary, the router will not
originate summary LSAs into the stub or NSSA area.
It will rely entirely on its default route.
If it is sendAreaSummary, the router will both
summarize and propagate summary LSAs.ro Enumeration .47.2.2.1.9 |
rosMgmtOspfAreaNssaTranslatorRoleIndicates an NSSA border router's ability to
perform NSSA translation of type-7 LSAs into
type-5 LSAs.ro Enumeration .47.2.2.1.10 |
rosMgmtOspfAreaNssaTranslatorStateIndicates if and how an NSSA border router is
performing NSSA translation of type-7 LSAs into type-5
LSAs. When this object is set to enabled, the NSSA Border
router's OspfAreaNssaExtTranslatorRole has been set to
always. When this object is set to elected, a candidate
NSSA Border router is Translating type-7 LSAs into type-5.
When this object is set to disabled, a candidate NSSA
border router is NOT translating type-7 LSAs into type-5.ro Enumeration .47.2.2.1.11 |
rosMgmtOspfAreaNssaTranslatorStabilityIntervalThe number of seconds after an elected translator
determines its services are no longer required, that
it should continue to perform its translation duties.ro PositiveInteger UNITS "seconds" .47.2.2.1.12 |
rosMgmtOspfAreaNssaTranslatorEventsIndicates the number of translator state changes
that have occurred since the last boot-up.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at other
times as indicated by the value of ospfDiscontinuityTime.ro Counter32 .47.2.2.1.13 |
rosMgmtOspfAreaDefaultCostIt indicates the cost of default route of NSSA area or
stub area.rw BigMetric .47.2.2.1.14 |
rosMgmtOspfAreaTypeIt has been used to describe the type of
area,area 0 indicates backbone, area that has virtual-links is
transmit area. When area is configured as stub,it's a stub area, and
same as nssa area.other areas are called normal areas.ro Enumeration .47.2.2.1.15 |
rosMgmtOspfAreaStatusThis object permits management of the table by
facilitating actions such as row creation,
construction, and destruction.
The value of this object has no effect on
whether other objects in this conceptual row can be
modified.rw RowStatus (SNMPv2-TC) .47.2.2.1.16 |
rosMgmtOspfAreaFilterInIpPrefixListNameFilter incoming summary lsa,the value of this object
indicates the name of an ip-prefix-list.rw OCTET STRING .47.2.2.1.17 |
rosMgmtOspfAreaFilterOutIpPrefixListNameFilter outgoing summary lsa,the value of this object
indicates the name of an ip-prefix-list.rw OCTET STRING .47.2.2.1.18 |
rosMgmtOspfAreaTeCapabilityIndicate Area TE enable state.rw TruthValue (SNMPv2-TC) .47.2.2.1.19 |
rosMgmtOspfNetWorkTableThe list of directly-connected networks which enable
the OSPF function. SEQUENCE OF RosMgmtOspfNetWorkEntry .47.2.3 |
rosMgmtOspfNetWorkEntryDefines an entry in the rosMgmtOspfNetWorkTable.
Information in this table is persistent and when this object
is written the entity SHOULD save the change to non-volatile
storage. RosMgmtOspfNetWorkEntry .47.2.3.1 |
rosMgmtOspfNetThe IP address of the net or subnet indicated
by the range. IpAddress .47.2.3.1.1 |
rosMgmtOspfMaskThe subnet mask that pertains to the net or
subnet. IpAddress .47.2.3.1.2 |
rosMgmtOspfNetWorkStatusThis object permits management of the table by
facilitating actions such as row creation,
construction, and destruction.
The value of this object has no effect on
whether other objects in this conceptual row can be
modified.rw RowStatus (SNMPv2-TC) .47.2.3.1.3 |
rosMgmtOspfStubAreaTableThe set of metrics that will be advertised
by a default Area Border Router into a stub area. SEQUENCE OF RosMgmtOspfStubAreaEntry .47.2.4 |
rosMgmtOspfStubAreaEntryThe metric for a given Type of Service that
will be advertised by a default Area Border
Router into a stub area.
Information in this table is persistent and when this object
is written the entity SHOULD save the change to non-volatile
storage. RosMgmtOspfStubAreaEntry .47.2.4.1 |
rosMgmtOspfStubAreaIdThe 32-bit identifier for the stub area. On
creation, this can be derived from the
instance. AreaID .47.2.4.1.1 |
rosMgmtOspfStubAreaOptionThe option of STUB area.True means that ABR cann't send summary lsa to
stub area.rw TruthValue (SNMPv2-TC) .47.2.4.1.2 |
rosMgmtOspfStubAreaStatusThis object permits management of the table by
facilitating actions such as row creation,
construction, and destruction.
The value of this object has no effect on
whether other objects in this conceptual row can be
modified.rw RowStatus (SNMPv2-TC) .47.2.4.1.3 |
rosMgmtOspfNssaAreaTableThe set of metrics that will be advertised
by a default Area Border Router into a Nssa area. SEQUENCE OF RosMgmtOspfNssaAreaEntry .47.2.5 |
rosMgmtOspfNssaAreaEntryThe metric for a given Type of Service that
will be advertised by a default Area Border
Router into a Nssa area.
Information in this table is persistent and when this object
is written the entity SHOULD save the change to non-volatile
storage. RosMgmtOspfNssaAreaEntry .47.2.5.1 |
rosMgmtOspfNssaAreaIdThe 32-bit identifier for the nssa area. On
creation, this can be derived from the
instance. AreaID .47.2.5.1.1 |
rosMgmtOspfNssaAreaOptionThe option of Nssa area. If first bit is set, Router should generate
default type-7 lsa; if second bit is set, nssa area cann't import ex-
ternal route; if third bit is set, ABR cann't send summary lsas to the
nssa area.rw Enumeration .47.2.5.1.2 |
rosMgmtOspfNssaAreaStatusThis object permits management of the table by
facilitating actions such as row creation,
construction, and destruction.
The value of this object has no effect on
whether other objects in this conceptual row can be
modified.rw RowStatus (SNMPv2-TC) .47.2.5.1.3 |
rosMgmtOspfIfTableThe OSPF Interface Table describes the interfaces
from the viewpoint of OSPF.
It augments the ipAddrTable with OSPF specific information. SEQUENCE OF RosMgmtOspfIfEntry .47.2.6 |
rosMgmtOspfIfEntryThe OSPF interface entry describes one interface
from the viewpoint of OSPF.
Information in this table is persistent and when this object
is written the entity SHOULD save the change to non-volatile
storage. RosMgmtOspfIfEntry .47.2.6.1 |
rosMgmtOspfAddressLessIfFor the purpose of easing the instancing of
addressed and addressless interfaces; this
variable takes the value 0 on interfaces with
IP addresses and the corresponding value of
ifIndex for interfaces having no IP address.ro InterfaceIndexOrZero (IF-MIB) .47.2.6.1.1 |
rosMgmtOspfIfIpAddressThe IP address of this OSPF interface.ro IpAddress .47.2.6.1.2 |
rosMgmtOspfIfAreaIdA 32-bit integer uniquely identifying the area
to which the interface connects. Area ID
0.0.0.0 is used for the OSPF backbone.ro AreaID .47.2.6.1.3 |
rosMgmtOspfIfTypeThe OSPF interface type.
By way of a default, this field may be intuited
from the corresponding value of ifType.
Broadcast LANs, such as Ethernet and IEEE 802.5,
take the value 'broadcast', X.25 and similar
technologies take the value 'nbma', and links
that are definitively point to point take the
value 'pointToPoint'.rw Enumeration .47.2.6.1.4 |
rosMgmtOspfIfAdminStatThe OSPF interface's administrative status.
The value formed on the interface, and the interface
will be advertised as an internal route to some area.
The value 'disabled' denotes that the interface is
external to OSPF.ro Status .47.2.6.1.5 |
rosMgmtOspfIfRtrPriorityThe priority of this interface. Used in
multi-access networks, this field is used in
the designated router election algorithm. The
value 0 signifies that the router is not eligible
to become the designated router on this particular
network. In the event of a tie in this value,
routers will use their Router ID as a tie breaker.rw DesignatedRouterPriority .47.2.6.1.6 |
rosMgmtOspfIfTransitDelayThe estimated number of seconds it takes to
transmit a link state update packet over this
interface. Note that the minimal value SHOULD be
1 second.rw Integer32 .47.2.6.1.7 |
rosMgmtOspfIfRetransIntervalThe number of seconds between link state advertisement
retransmissions, for adjacencies belonging to this
interface. This value is also used when retransmitting
database description and Link State request packets.
Note that minimal value SHOULD be 1 second.rw Integer32 .47.2.6.1.8 |
rosMgmtOspfIfHelloIntervalThe length of time, in seconds, between the Hello packets
that the router sends on the interface. This value must be
the same for all routers attached to a common network.rw Integer32 .47.2.6.1.9 |
rosMgmtOspfIfRtrDeadIntervalThe number of seconds that a router's Hello packets have
not been seen before its neighbors declare the router down.
This should be some multiple of the Hello interval. This
value must be the same for all routers attached to a common
network.rw Integer32 .47.2.6.1.10 |
rosMgmtOspfIfPollIntervalThe larger time interval, in seconds, between the Hello
packets sent to an inactive non-broadcast multi-access
neighbor.rw Integer32 .47.2.6.1.11 |
rosMgmtOspfIfStateThe OSPF Interface State.ro Enumeration .47.2.6.1.12 |
rosMgmtOspfIfDesignatedRouterThe IP address of the designated router.ro IpAddress .47.2.6.1.13 |
rosMgmtOspfIfBackupDesignatedRouterThe IP address of the backup designated
router.ro IpAddress .47.2.6.1.14 |
rosMgmtOspfIfEventsThe number of times this OSPF interface has
changed its state or an error has occurred.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at other
times as indicated by the value of ospfDiscontinuityTime.ro Counter32 .47.2.6.1.15 |
rosMgmtOspfIfAuthKeyIdThe key id of md5 authentication.rw Integer32 .47.2.6.1.16 |
rosMgmtOspfIfAuthSimpleKeyTypeThe type of password for simple authentication.rw Enumeration .47.2.6.1.17 |
rosMgmtOspfIfAuthMd5KeyTypeThe type of password for md5 authentication.rw Enumeration .47.2.6.1.18 |
rosMgmtOspfIfAuthSimpleKeyThe password used as an OSPF
authentication key when simple password security
is enabled.rw OCTET STRING .47.2.6.1.19 |
rosMgmtOspfIfAuthMd5KeyThe password used as an OSPF
authentication key when md5 security
is enabled.rw OCTET STRING .47.2.6.1.20 |
rosMgmtOspfIfAuthKeyChainThe name of key chain.rw OCTET STRING .47.2.6.1.21 |
rosMgmtOspfIfAuthTypeThe authentication type specified for an interface.
Note that this object can be used to engage
in significant attacks against an OSPF router.rw OspfAuthenticationType .47.2.6.1.22 |
rosMgmtOspfIfLsaCountThe total number of link-local link state advertisements
in this interface's link-local link state database.ro Gauge32 .47.2.6.1.23 |
rosMgmtOspfIfLsaCksumSumThe 32-bit unsigned sum of the Link State
Advertisements' LS checksums contained in this
interface's link-local link state database.
The sum can be used to determine if there has
been a change in the interface's link state
database and to compare the interface link state
database of routers attached to the same subnet.ro Unsigned32 .47.2.6.1.24 |
rosMgmtOspfIfDesignatedRouterIdThe Router ID of the designated router.ro RouterID .47.2.6.1.25 |
rosMgmtOspfIfBackupDesignatedRouterIdThe Router ID of the backup designated router.ro RouterID .47.2.6.1.26 |
rosMgmtOspfIfPassiveIndicate the interface is a passive interface.rw EnableVar (SWITCH-TC) .47.2.6.1.27 |
rosMgmtOspfIfMtuIndicate ignore the interface's mtu.rw EnableVar (SWITCH-TC) .47.2.6.1.28 |
rosMgmtOspfIfMetricThe metric of using this Type of Service on
this interface. The default value of the TOS 0
metric is 10^8 / ifSpeed.rw Metric .47.2.6.1.29 |
rosMgmtOspfIfBfdIndicate the interface enables BFD function.rw EnableVar (SWITCH-TC) .47.2.6.1.30 |
rosMgmtOspfIfGRResyncThe interval period starts from the time a
restart signal is received from a neighbor.rw Integer32 .47.2.6.1.31 |
rosMgmtOspfVirtIfTableInformation about this router's virtual interfaces
that the OSPF Process is configured to carry on. SEQUENCE OF RosMgmtOspfVirtIfEntry .47.2.7 |
rosMgmtOspfVirtIfEntryInformation about a single virtual interface.
Information in this table is persistent and when this object
is written the entity SHOULD save the change to non-volatile
storage. RosMgmtOspfVirtIfEntry .47.2.7.1 |
rosMgmtOspfVirtIfAreaIdThe transit area that the virtual link
traverses. By definition, this is not 0.0.0.0.ro AreaID .47.2.7.1.1 |
rosMgmtOspfVirtIfNeighborThe Router ID of the virtual neighbor.ro RouterID .47.2.7.1.2 |
rosMgmtOspfVirtIfTransitDelayThe estimated number of seconds it takes to
transmit a Link State update packet over this
interface. Note that the minimal value SHOULD be
1 second.rw UpToMaxAge UNITS "seconds" .47.2.7.1.3 |
rosMgmtOspfVirtIfRetransIntervalThe number of seconds between link state
avertisement retransmissions, for adjacencies
belonging to this interface. This value is
also used when retransmitting database
description and Link State request packets. This
value should be well over the expected
round-trip time. Note that the minimal value SHOULD be
1 second.rw UpToMaxAge UNITS "seconds" .47.2.7.1.4 |
rosMgmtOspfVirtIfHelloIntervalThe length of time, in seconds, between the
Hello packets that the router sends on the
interface. This value must be the same for the
virtual neighbor.rw HelloRange UNITS "seconds" .47.2.7.1.5 |
rosMgmtOspfVirtIfRtrDeadIntervalThe number of seconds that a router's Hello
packets have not been seen before its
neighbors declare the router down. This should be
some multiple of the Hello interval. This
value must be the same for the virtual neighbor.rw PositiveInteger UNITS "seconds" .47.2.7.1.6 |
rosMgmtOspfVirtIfStateOSPF virtual interface states.ro Enumeration .47.2.7.1.7 |
rosMgmtOspfVirtIfEventsThe number of state changes or error events on
this virtual link.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at other
times as indicated by the value of ospfDiscontinuityTime.ro Counter32 .47.2.7.1.8 |
rosMgmtOspfVirtIfAuthKeyIdThe key id of md5 authentication.rw Integer32 .47.2.7.1.9 |
rosMgmtOspfVirtIfAuthSimpleKeyTypeThe type of password for simple authentication.rw Enumeration .47.2.7.1.10 |
rosMgmtOspfVirtIfAuthMd5KeyTypeThe type of password for md5 authentication.rw Enumeration .47.2.7.1.11 |
rosMgmtOspfVirtIfAuthSimpleKeyThe password used as an OSPF
authentication key when simple password security
is enabled.rw OCTET STRING .47.2.7.1.12 |
rosMgmtOspfVirtIfAuthMd5KeyThe password used as an OSPF
authentication key when md5 security
is enabled.rw OCTET STRING .47.2.7.1.13 |
rosMgmtOspfVirtIfAuthKeyChainThe name of key chain.rw OCTET STRING .47.2.7.1.14 |
rosMgmtOspfVirtIfAuthTypeThe authentication type specified for a virtual interface.
Note that this object can be used to engage
in significant attacks against an OSPF router.rw OspfAuthenticationType .47.2.7.1.15 |
rosMgmtOspfVirtIfLsaCountThe total number of link-local link state advertisements
in this virtual interface's link-local link state database.ro Gauge32 .47.2.7.1.16 |
rosMgmtOspfVirtIfLsaCksumSumThe 32-bit unsigned sum of the link state
advertisements' LS checksums contained in this
virtual interface's link-local link state database.
The sum can be used to determine if there has
been a change in the virtual interface's link state
database, and to compare the virtual interface
link state database of the virtual neighbors.ro Unsigned32 .47.2.7.1.17 |
rosMgmtOspfVirtIfCostIt has been used to describe the cost of
virtual interface.ro Integer32 (1.. 65535) .47.2.7.1.18 |
rosMgmtOspfVirtIfStatusThis object permits management of the table by
facilitating actions such as row creation,
construction, and destruction.
The value of this object has no effect on
whether other objects in this conceptual row can be
modified.rw RowStatus (SNMPv2-TC) .47.2.7.1.19 |
rosMgmtOspfNbrTableA table describing all non-virtual neighbors
in the locality of the OSPF router. SEQUENCE OF RosMgmtOspfNbrEntry .47.2.8 |
rosMgmtOspfNbrEntryThe information regarding a single neighbor.
Information in this table is persistent and when this object
is written the entity SHOULD save the change to non-volatile
storage. RosMgmtOspfNbrEntry .47.2.8.1 |
rosMgmtOspfNbrIpAddrThe IP address this neighbor is using in its
IP source address. Note that, on addressless
links, this will not be 0.0.0.0 but the
address of another of the neighbor's interfaces.ro IpAddress .47.2.8.1.1 |
rosMgmtOspfNbrAddressLessIndexOn an interface having an IP address, zero.
On addressless interfaces, the corresponding
value of ifIndex in the Internet Standard MIB.
On row creation, this can be derived from the
instance.ro InterfaceIndexOrZero (IF-MIB) .47.2.8.1.2 |
rosMgmtOspfNbrRtrIdA 32-bit integer (represented as a type
IpAddress) uniquely identifying the neighboring
router in the Autonomous System.ro RouterID .47.2.8.1.3 |
rosMgmtOspfNbrOptionsA bit mask corresponding to the neighbor's
options field.
Bit 0, if set, indicates that the system will
operate on Type of Service metrics other than
TOS 0. If zero, the neighbor will ignore all
metrics except the TOS 0 metric.
Bit 1, if set, indicates that the associated
area accepts and operates on external
information; if zero, it is a stub area.
Bit 2, if set, indicates that the system is
capable of routing IP multicast datagrams, that is
that it implements the multicast extensions to
OSPF.
Bit 3, if set, indicates that the associated
area is an NSSA. These areas are capable of
carrying type-7 external advertisements, which
are translated into type-5 external advertisements
at NSSA borders.ro Integer32 .47.2.8.1.4 |
rosMgmtOspfNbrPriorityThe priority of this neighbor in the designated
router election algorithm. The value 0 signifies
that the neighbor is not eligible to become
the designated router on this particular network.ro DesignatedRouterPriority .47.2.8.1.5 |
rosMgmtOspfNbrStateThe state of the relationship with this neighbor.ro Enumeration .47.2.8.1.6 |
rosMgmtOspfNbrEventsThe number of times this neighbor relationship
has changed state or an error has occurred.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at other
times as indicated by the value of ospfDiscontinuityTime.ro Counter32 .47.2.8.1.7 |
rosMgmtOspfNbrLsRetransQLenThe current length of the retransmission
queue.ro Gauge32 .47.2.8.1.8 |
rosMgmtOspfNbrModeIt has been used to describe the master-slave mode of
neighbor.ro Enumeration .47.2.8.1.9 |
rosMgmtOspfNbmaCfgNbrTableA table describing all configured neigbors on nbma network. SEQUENCE OF RosMgmtOspfNbmaCfgNbrEntry .47.2.9 |
rosMgmtOspfNbmaCfgNbrEntryThe information regarding a Configured neighbor.
Information in this table is persistent and when this object
is written the entity SHOULD save the change to non-volatile
storage. RosMgmtOspfNbmaCfgNbrEntry .47.2.9.1 |
rosMgmtOspfNbmaCfgNbrIpAddrThe IP address this neighbor is using in its
IP source address. Note that, on addressless
links, this will not be 0.0.0.0 but the
address of another of the neighbor's interfaces. IpAddress .47.2.9.1.1 |
rosMgmtOspfNbmaCfgNbrPriorityThe priority of this neighbor in the designated
router election algorithm. The value 0 signifies
that the neighbor is not eligible to become
the designated router on this particular network.rw DesignatedRouterPriority .47.2.9.1.2 |
rosMgmtOspfNbmaCfgNbrStatusThis object permits management of the table by
facilitating actions such as row creation,
construction, and destruction.
The value of this object has no effect on
whether other objects in this conceptual row can be
modified.rw RowStatus (SNMPv2-TC) .47.2.9.1.3 |
rosMgmtOspfVirtNbrTableThis table describes all virtual neighbors.
Since virtual links are configured
in the Virtual Interface Table, this table is read-only. SEQUENCE OF RosMgmtOspfVirtNbrEntry .47.2.10 |
rosMgmtOspfVirtNbrEntryVirtual neighbor information. RosMgmtOspfVirtNbrEntry .47.2.10.1 |
rosMgmtOspfVirtNbrAreaThe Transit Area Identifier.ro AreaID .47.2.10.1.1 |
rosMgmtOspfVirtNbrRtrIdA 32-bit integer uniquely identifying the
neighboring router in the Autonomous System.ro RouterID .47.2.10.1.2 |
rosMgmtOspfVirtNbrIpAddrThe IP address this virtual neighbor is using.ro IpAddress .47.2.10.1.3 |
rosMgmtOspfVirtNbrOptionsA bit mask corresponding to the neighbor's
options field.
Bit 1, if set, indicates that the system will
operate on Type of Service metrics other than
TOS 0. If zero, the neighbor will ignore all
metrics except the TOS 0 metric.
Bit 2, if set, indicates that the system is
network multicast capable, i.e., that it
implements OSPF multicast routing.ro Integer32 .47.2.10.1.4 |
rosMgmtOspfVirtNbrStateThe state of the virtual neighbor relationship.ro Enumeration .47.2.10.1.5 |
rosMgmtOspfVirtNbrEventsThe number of times this virtual link has
changed its state or an error has occurred.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at other
times as indicated by the value of ospfDiscontinuityTime.ro Counter32 .47.2.10.1.6 |
rosMgmtOspfVirtNbrLsRetransQLenThe current length of the retransmission
queue.ro Gauge32 .47.2.10.1.7 |
rosMgmtOspfVirtNbrLessIfIt has been used to describe the out interface index of
this virtual neighbor.ro Integer32 .47.2.10.1.8 |
rosMgmtOspfVirtNbrModeIt has been used to describe the master-slave mode of
virtual neighbor.ro Enumeration .47.2.10.1.9 |
rosMgmtOspfAreaAggregateTableThe Area Aggregate Table acts as an adjunct
to the Area Table. It describes those address aggregates
that are configured to be propagated from an area.
Its purpose is to reduce the amount of information
that is known beyond an Area's borders.
It contains a set of IP address ranges
specified by an IP address/IP network mask pair.
For example, a class B address range of X.X.X.X
with a network mask of 255.255.0.0 includes all IP
addresses from X.X.0.0 to X.X.255.255.
Note that if ranges are configured such that one range
subsumes another range (e.g., 10.0.0.0 mask 255.0.0.0
and 10.1.0.0 mask 255.255.0.0),
the most specific match is the preferred one. SEQUENCE OF RosMgmtOspfAreaAggregateEntry .47.2.11 |
rosMgmtOspfAreaAggregateEntryA single area aggregate entry.
Information in this table is persistent and when this object
is written the entity SHOULD save the change to non-volatile
storage. RosMgmtOspfAreaAggregateEntry .47.2.11.1 |
rosMgmtOspfAreaAggregateAreaIDThe area within which the address aggregate is to be
found. AreaID .47.2.11.1.1 |
rosMgmtOspfAreaAggregateLsdbTypeThe type of the address aggregate. This field
specifies the Lsdb type that this address
aggregate applies to. Enumeration .47.2.11.1.2 |
rosMgmtOspfAreaAggregateNetThe IP address of the net or subnet indicated
by the range. IpAddress .47.2.11.1.3 |
rosMgmtOspfAreaAggregateMaskThe subnet mask that pertains to the net or
subnet. IpAddress .47.2.11.1.4 |
rosMgmtOspfAreaAggregateEffectSubnets subsumed by ranges either trigger the
advertisement of the indicated aggregate
(advertiseMatching) or result in the subnet's not
being advertised at all outside the area.rw Enumeration .47.2.11.1.5 |
rosMgmtOspfAreaAggregateStatusThis object permits management of the table by
facilitating actions such as row creation,
construction, and destruction.
The value of this object has no effect on
whether other objects in this conceptual row can be
modified.rw RowStatus (SNMPv2-TC) .47.2.11.1.6 |
rosMgmtOspfExternalAggregateTableIt contains a set of IP address ranges
specified by an IP address/IP network mask pair.
For example, a class B address range of X.X.X.X
with a network mask of 255.255.0.0 includes all IP
addresses from X.X.0.0 to X.X.255.255.
Note that if ranges are configured such that one range
subsumes another range (e.g., 10.0.0.0 mask 255.0.0.0
and 10.1.0.0 mask 255.255.0.0),
the most specific match is the preferred one. SEQUENCE OF RosMgmtOspfExternalAggregateEntry .47.2.12 |
rosMgmtOspfExternalAggregateEntryA single external aggregate entry.
Information in this table is persistent and when this object
is written the entity SHOULD save the change to non-volatile
storage. RosMgmtOspfExternalAggregateEntry .47.2.12.1 |
rosMgmtOspfExternalAggregateNetThe IP address of the net or subnet indicated
by the range. IpAddress .47.2.12.1.1 |
rosMgmtOspfExternalAggregateMaskThe subnet mask that pertains to the net or
subnet. IpAddress .47.2.12.1.2 |
rosMgmtOspfExternalAggregateEffectThis object controls the advertisement of external route summary.rw Enumeration .47.2.12.1.3 |
rosMgmtOspfExternalAggregateCostIt indicates the cost of aggregated external route, 16777215
represents the cost is not set, the metric of route while decided
by ospf itself according to the route type.rw BigMetric .47.2.12.1.4 |
rosMgmtOspfExternalAggregateStatusThis object permits management of the table by
facilitating actions such as row creation,
construction, and destruction.
The value of this object has no effect on
whether other objects in this conceptual row can be
modified.rw RowStatus (SNMPv2-TC) .47.2.12.1.5 |
rosMgmtOspfLsdbTableThe OSPF Process's link state database (LSDB).
The LSDB contains the link state advertisements
from throughout the areas that the device is attached to. SEQUENCE OF RosMgmtOspfLsdbEntry .47.2.13 |
rosMgmtOspfLsdbEntryA single link state advertisement. RosMgmtOspfLsdbEntry .47.2.13.1 |
rosMgmtOspfLsdbAreaIdThe 32-bit identifier of the area from which
the LSA was received.ro AreaID .47.2.13.1.1 |
rosMgmtOspfLsdbTypeThe type of the link state advertisement.
Each link state type has a separate advertisement
format.
Note: External link state advertisements are permitted
for backward compatibility, but should be displayed
in the rosMgmtOspfAsLsdbTable rather than here.ro Enumeration .47.2.13.1.2 |
rosMgmtOspfLsdbLsIdThe Link State ID is an LS Type Specific field
containing either a Router ID or an IP address;
it identifies the piece of the routing domain
that is being described by the advertisement.ro IpAddress .47.2.13.1.3 |
rosMgmtOspfLsdbRouterIdThe 32-bit number that uniquely identifies the
originating router in the Autonomous System.ro RouterID .47.2.13.1.4 |
rosMgmtOspfLsdbSequenceThe sequence number field is a signed 32-bit
integer. It starts with the value '80000001'h,
or -'7FFFFFFF'h, and increments until '7FFFFFFF'h.
Thus, a typical sequence number will be very negative.
It is used to detect old and duplicate Link State
Advertisements. The space of sequence numbers is linearly
ordered. The larger the sequence number, the more recent
the advertisement.ro Integer32 .47.2.13.1.5 |
rosMgmtOspfLsdbAgeThis field is the age of the link state advertisement
in seconds.ro Integer32 -- Should be 0..MaxAge, except when -- doNotAge bit is set UNITS "seconds" .47.2.13.1.6 |
rosMgmtOspfLsdbChecksumThis field is the checksum of the complete contents of
the advertisement, excepting the age field. The age field
is excepted so that an advertisement's age can be
incremented without updating the checksum. The checksum
used is the same that is used for ISO connectionless
datagrams; it is commonly referred to as the
Fletcher checksum.ro Integer32 .47.2.13.1.7 |
rosMgmtOspfLsdbAdvertisementThe entire link state advertisement, including
its header.
Note that for variable length LSAs, SNMP agents
may not be able to return the largest string size.ro OCTET STRING .47.2.13.1.8 |
rosMgmtOspfAsLsdbTableThe OSPF Process's AS-scope LSA link state database.
The database contains the AS-scope Link State
Advertisements from throughout the areas that
the device is attached to.
This table is identical to the OSPF LSDB Table
in format, but contains only AS-scope Link State
Advertisements. The purpose is to allow AS-scope
LSAs to be displayed once for the router rather
than once in each non-stub area. SEQUENCE OF RosMgmtOspfAsLsdbEntry .47.2.14 |
rosMgmtOspfAsLsdbEntryA single link state advertisement. RosMgmtOspfAsLsdbEntry .47.2.14.1 |
rosMgmtOspfAsLsdbTypeThe type of the link state advertisement.
Each link state type has a separate
advertisement format. Enumeration .47.2.14.1.1 |
rosMgmtOspfAsLsdbLsIdThe Link State ID is an LS Type Specific field
containing either a Router ID or an IP address;
it identifies the piece of the routing domain
that is being described by the advertisement. IpAddress .47.2.14.1.2 |
rosMgmtOspfAsLsdbRouterIdThe 32-bit number that uniquely identifies the
originating router in the Autonomous System. RouterID .47.2.14.1.3 |
rosMgmtOspfAsLsdbSequenceThe sequence number field is a signed 32-bit
integer. It starts with the value '80000001'h,
or -'7FFFFFFF'h, and increments until '7FFFFFFF'h.
Thus, a typical sequence number will be very negative.
It is used to detect old and duplicate link state
advertisements. The space of sequence numbers is linearly
ordered. The larger the sequence number, the more recent
the advertisement.ro Integer32 .47.2.14.1.4 |
rosMgmtOspfAsLsdbAgeThis field is the age of the link state
advertisement in seconds.ro Integer32 -- Should be 0..MaxAge, except when -- doNotAge bit is set UNITS "seconds" .47.2.14.1.5 |
rosMgmtOspfAsLsdbChecksumThis field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checksum. The checksum
used is the same that is used for ISO
connectionless datagrams; it is commonly referred
to as the Fletcher checksum.ro Integer32 .47.2.14.1.6 |
rosMgmtOspfAsLsdbAdvertisementThe entire link state advertisement, including
its header.ro OCTET STRING .47.2.14.1.7 |
rosMgmtOspfAreaLsaCountTableThis table maintains per-area, per-LSA-type counters SEQUENCE OF RosMgmtOspfAreaLsaCountEntry .47.2.15 |
rosMgmtOspfAreaLsaCountEntryAn entry with a number of link advertisements
of a given type for a given area. RosMgmtOspfAreaLsaCountEntry .47.2.15.1 |
rosMgmtOspfAreaLsaCountAreaIdThis entry Area ID. AreaID .47.2.15.1.1 |
rosMgmtOspfAreaLsaCountLsaTypeThis entry LSA type. Enumeration .47.2.15.1.2 |
rosMgmtOspfAreaLsaCountNumberNumber of LSAs of a given type for a given area.ro Gauge32 .47.2.15.1.3 |
rosMgmtOspfRedistributeTableImport external route to ospf protocol. SEQUENCE OF RosMgmtOspfRedistributeEntry .47.2.16 |
rosMgmtOspfRedistributeEntryDefine an entry in the rosMgmtOspfRedistributeTable RosMgmtOspfRedistributeEntry .47.2.16.1 |
rosMgmtOspfRedistributeProtocolRoute protocol to be redistributed.ro Enumeration .47.2.16.1.1 |
rosMgmtOspfRedistributeProcessIdProcess id of redistributed route protocol, only support ospf.ro ProcessID .47.2.16.1.2 |
rosMgmtOspfRedistributeCostIt indicates the cost of redistributed route, 16777215 represents
the cost is not set, the metric of route while decided by
ospf itself according to the route type.rw BigMetric .47.2.16.1.3 |
rosMgmtOspfRedistributeTypeThe type of external route.rw Enumeration .47.2.16.1.4 |
rosMgmtOspfRedistributeStatusThis object permits management of the table by
facilitating actions such as row creation,
construction, and destruction.
The value of this object has no effect on
whether other objects in this conceptual row can be
modified.rw RowStatus (SNMPv2-TC) .47.2.16.1.5 |
rosMgmtOspfRedistributeRouteMapNameSpecify a route-map.rw OCTET STRING .47.2.16.1.6 |
rosMgmtOspfRedistributeTagSet tag of route.rw Unsigned32 .47.2.16.1.7 |
rosMgmtOspfDefaultInfoTableThe table generate or delete the default route. SEQUENCE OF RosMgmtOspfDefaultInfoEntry .47.2.17 |
rosMgmtOspfDefaultInfoEntryDefine an entry in the rosMgmtOspfDefaultInfoTable RosMgmtOspfDefaultInfoEntry .47.2.17.1 |
rosMgmtOspfDefaultInfoAlwaysWhether always inform default route.rw TruthValue (SNMPv2-TC) .47.2.17.1.1 |
rosMgmtOspfDefaultInfoCostIt indicates the default cost of route, 16777215 represents
the default cost is not set, the metric of route while decided by
ospf itself according to the route type.rw BigMetric .47.2.17.1.2 |
rosMgmtOspfDefaultInfoTypeIt indicates the type of default route.rw Enumeration .47.2.17.1.3 |
rosMgmtOspfDefaultInfoStatusThis object permits management of the table by
facilitating actions such as row creation,
construction, and destruction.
The value of this object has no effect on
whether other objects in this conceptual row can be
modified.rw RowStatus (SNMPv2-TC) .47.2.17.1.4 |
rosMgmtOspfPacketIoStatisTableThe table is used to storage all kinds of
input and output packet statistical information of
OSPF process. SEQUENCE OF RosMgmtOspfPacketIoStatisEntry .47.2.18 |
rosMgmtOspfPacketIoStatisEntryDefine an entry in the rosMgmtOspfPacketIoStatisTable RosMgmtOspfPacketIoStatisEntry .47.2.18.1 |
rosMgmtOspfPacketIoStatisIoTypeIt has been used to describe the IO direction of
packet. Enumeration .47.2.18.1.1 |
rosMgmtOspfPacketIoStatisPktTypeIt has been used to describe the type of
OSPF packet. Enumeration .47.2.18.1.2 |
rosMgmtOspfPacketIoStatisNumberThe number indicates the number of specified type of
packets on input or output direction.ro Integer32 .47.2.18.1.3 |
rosMgmtOspfRouteTableThe table is used to storage OSPF calculation of routing table. SEQUENCE OF RosMgmtOspfRouteEntry .47.2.19 |
rosMgmtOspfRouteEntryDefine an entry in the rosMgmtOspfRouteTable RosMgmtOspfRouteEntry .47.2.19.1 |
rosMgmtOspfRouteDestIt has been used to describe the destination address of
an ospf route. IpAddress .47.2.19.1.1 |
rosMgmtOspfRouteMaskIt has been used to describe the mask of
an ospf route. IpAddress .47.2.19.1.2 |
rosMgmtOspfRouteTypeIt indicates the type of an ospf route.
The hige 8 bits represents the ospf route type.
Value 1, represents the route is a ROUTER route,
whith is to a destined router.
Value 2, is for a NETWORK route, most caculated
ospf route is NETWORK route.
Value 3, represents the route is to be DISCARDed resently.
The low 8 bits represents the ospf route path type.
Value 1, represents the route path is a intra area path,
Value 2, represents the route path is a inter area path,
Value 3, represents the route path is a type1 external path,
Value 4, represents the route path is a type2 external path Integer32 (1..'37'h) .47.2.19.1.3 |
rosMgmtOspfRouteLsTypeIt has been used to describe the LSA type of
a router.ro Enumeration .47.2.19.1.4 |
rosMgmtOspfRouteMetricIt has been used to describe the metric of
an ospf route.ro Integer32 .47.2.19.1.5 |
rosMgmtOspfRouteNextHopIt has been used to describe the nexthop address of
an ospf route.ro IpAddress .47.2.19.1.6 |
rosMgmtOspfRouteAdvRtrIt has been used to describe the advertising router of
an ospf route.ro IpAddress .47.2.19.1.7 |
rosMgmtOspfRouteAreaIt has been used to describe the ccmputing area of
an ospf route.ro Integer32 .47.2.19.1.8 |
rosMgmtOspfBdrRouteTableThe table is used to storage the imformation of boder router. SEQUENCE OF RosMgmtOspfBdrRouteEntry .47.2.20 |
rosMgmtOspfBdrRouteEntryDefine an entry in the rosMgmtOspfBdrRouteTable RosMgmtOspfBdrRouteEntry .47.2.20.1 |
rosMgmtOspfBdrRouteRtrTypeIt indicates the type of an ospf router.
The hige 8 bits is a bit mask corresponding to
the ospf router type.
Bit 1, if set, indicates that the router is an ABR.
Bit 2, if set, indicates that the router is an ASBR..
Bit 3, if set, indicates that the router has a VLINK in this area.
Bit 4, if set, indicates that the routers always translates Type-7.
Bit 5, if set, indicates that it is a shortcut-ABR specific flag.
The low 8 bits represents the route path type to this router.
Value 1, represents the route path is a intra area path,
Value 2, represents the route path is a inter area path,
Value 3, represents the route path is a type1 external path,
Value 4, represents the route path is a type2 external path Integer32 (1..'77'h) .47.2.20.1.1 |
rosMgmtOspfBdrRouteAreaIt has been used to describe the area of
a boder router. IpAddress .47.2.20.1.2 |
rosMgmtOspfBdrRouteDestIt has been used to describe the boder router by
it's router id. IpAddress .47.2.20.1.3 |
rosMgmtOspfBdrRouteNextHopIIt has been used to describe the nexthop router to
reach a boder router. IpAddress .47.2.20.1.4 |
rosMgmtOspfBdrRouteLsTypeIt has been used to describe the LSA type of
a boder router.ro Enumeration .47.2.20.1.5 |
rosMgmtOspfBdrRouteMetricIt has been used to describe the metric to
a boder router.ro Integer32 .47.2.20.1.6 |
rosMgmtOspfDistributeListGroup OBJECT IDENTIFIER .47.2.21 |
rosMgmtOspfDistributeListInTableThe table is used to config and check distribute-in policy. SEQUENCE OF RosMgmtOspfDistributeListInEntry .47.2.21.1 |
rosMgmtOspfDistributeListInEntryDefine an entry in the rosMgmtOspfDistributeListInTable RosMgmtOspfDistributeListInEntry .47.2.21.1.1 |
rosMgmtOspfDistrInIpPrefixListNameFilter incoming routing updates,the value of this
object indicates the name of an ip-prefix-list.rw OCTET STRING .47.2.21.1.1.1 |
rosMgmtOspfDistrInAclNumFilter incoming routing updates by the IP ACL number of OSPF distribute-in policy,
-1 is a value to inditace no setting of acl.rw Integer32 .47.2.21.1.1.2 |
rosMgmtOspfDistrInRowStatusThis object permits management of the table by
facilitating actions such as row creation,construction,
and destruction.The value of this object has no effect
on whether other objects in this conceptual row can be
modified.rw RowStatus (SNMPv2-TC) .47.2.21.1.1.3 |
rosMgmtOspfDistributeListOutTableThe table is used to config and check distribute-out policy. SEQUENCE OF RosMgmtOspfDistributeListOutEntry .47.2.21.2 |
rosMgmtOspfDistributeListOutEntryDefine an entry in the rosMgmtOspfDistributeListOutTable RosMgmtOspfDistributeListOutEntry .47.2.21.2.1 |
rosMgmtOspfDistrOutIpPrefixListNameFilter outgoing routing updates,the value of this object
indicates the name of an ip-prefix-list.rw OCTET STRING .47.2.21.2.1.1 |
rosMgmtOspfDistrOutAclNumFilter incoming outgoing updates by the IP ACL number of OSPF distribute-out policy,
-1 is a value to inditace no setting of acl.rw Integer32 .47.2.21.2.1.2 |
rosMgmtOspfDistrOutRowStatusThis object permits management of the table by
facilitating actions such as row creation,construction,
and destruction. The value of this object has no effect
on whether other objects in this conceptual row can be
modified.rw RowStatus (SNMPv2-TC) .47.2.21.2.1.3 |
rosMgmtOspfDistributeListOutProtocolTableThe table is used to config and check distribute-out policy based on protocol. SEQUENCE OF RosMgmtOspfDistributeListOutProtocolEntry .47.2.21.3 |
rosMgmtOspfDistributeListOutProtocolEntryDefine an entry in the rosMgmtOspfDistributeListOutProtocolTable RosMgmtOspfDistributeListOutProtocolEntry .47.2.21.3.1 |
rosMgmtOspfDistrOutProtocolRedistributed route protocol. Enumeration .47.2.21.3.1.1 |
rosMgmtOspfDistrOutProcessIdProcess id of redistributed route protocol, only support ospf. ProcessID .47.2.21.3.1.2 |
rosMgmtOspfDistrOutProIpPrefixListNameFiltering outgoing updates based on imported protocol, the value
of this object indicates the name of an ip-prefix-list.rw OCTET STRING .47.2.21.3.1.3 |
rosMgmtOspfDistrOutProAclNumFiltering outgoing updates based on imported protocol, the value of this object
indicates the IP ACL number, -1 is a value to inditace no setting of acl.rw Integer32 .47.2.21.3.1.4 |
rosMgmtOspfDistrOutProRowStatusThis object permits management of the table by
facilitating actions such as row creation,construction,
and destruction.The value of this object has no effect
on whether other objects in this conceptual row can be
modified.rw RowStatus (SNMPv2-TC) .47.2.21.3.1.5 |
rosMgmtOspfDNBitCheckDisableSummaryTableThe table check or set the operation of ND bit. SEQUENCE OF RosMgmtOspfDNBitCheckDisableSummaryEntry .47.2.22 |
rosMgmtOspfDNBitCheckDisableSummaryEntryDefine an entry in the RosMgmtOspfDNBitCheckDisableSummaryEntry RosMgmtOspfDNBitCheckDisableSummaryEntry .47.2.22.1 |
rosMgmtOspfDNBitCheckDisableSummaryRtrIdIt indicates the router-id of summary-lsa,which can be operated the DN bit separately.This node can only
be used for check operation RouterID .47.2.22.1.1 |
rosMgmtOspfDNBitCheckDisableSummaryStatusThis object permits management of the table by
facilitating actions such as row creation,
construction, and destruction.
The value of this object has no effect on
whether other objects in this conceptual row can be
modified.rw RowStatus (SNMPv2-TC) .47.2.22.1.2 |
rosMgmtOspfConformance OBJECT IDENTIFIER .47.3 |