RMS-COMPACT-SNMPv1-MAIN-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for RMS-COMPACT-SNMPv1-MAIN-MIB.
275
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
275 total| Object Name |
|---|
sinetica OBJECT IDENTIFIER .1.3.6.1.4.1.3711 |
RFC1213-MIB Unknown .1.3.6.1.4.1.3711 |
rms-compact OBJECT IDENTIFIER .1.3.6.1.4.1.3711.15 |
rms-compact1 OBJECT IDENTIFIER .1.3.6.1.4.1.3711.15.1 |
rms-cObjects OBJECT IDENTIFIER .1.3.6.1.4.1.3711.15.1.1 |
rms-cEnviroment OBJECT IDENTIFIER .1.3.6.1.4.1.3711.15.1.1.1 |
rms-cTemp1 OBJECT IDENTIFIER .1.3.6.1.4.1.3711.15.1.1.1.1 |
rms-cTemp1LowControlLimitAlarmTemperature is below the low control limit. TRAP-TYPE .1.3.6.1.4.1.3711.15.1.1.1.1.0.101 |
rms-cTemp1LowWarningLimitAlarmTemperature is below the low warning limit. TRAP-TYPE .1.3.6.1.4.1.3711.15.1.1.1.1.0.102 |
rms-cTemp1HighWarningLimitAlarmTemperature is over the high warning limit. TRAP-TYPE .1.3.6.1.4.1.3711.15.1.1.1.1.0.103 |
rms-cTemp1HighControlLimitAlarmTemperature is over the high control limit. TRAP-TYPE .1.3.6.1.4.1.3711.15.1.1.1.1.0.104 |
rms-cTemp1LowControlLimitNormalTemperature is inside the low control limit. TRAP-TYPE .1.3.6.1.4.1.3711.15.1.1.1.1.0.105 |
rms-cTemp1LowWarningLimitNormalTemperature is inside the low warning limit. TRAP-TYPE .1.3.6.1.4.1.3711.15.1.1.1.1.0.106 |
rms-cTemp1HighWarningLimitNormalTemperature is inside the high warning limit. TRAP-TYPE .1.3.6.1.4.1.3711.15.1.1.1.1.0.107 |
rms-cTemp1HighControlLimitNormalTemperature is inside the high control limit. TRAP-TYPE .1.3.6.1.4.1.3711.15.1.1.1.1.0.108 |
rms-cTemp1EnableMonitoringSetting to one enables monitoring of Temperaturerw Enumeration .1.3.6.1.4.1.3711.15.1.1.1.1.1 |
rms-cTemp1NameThe name of the temperature readingrw DisplayString .1.3.6.1.4.1.3711.15.1.1.1.1.2 |
rms-cTemp1CalibrationOffsetCalibration offset in 0.1 degreesrw INTEGER (-100..100) .1.3.6.1.4.1.3711.15.1.1.1.1.3 |
rms-cTemp1CurrentThe current temperature reading in 0.1%ro INTEGER (-200..1000) .1.3.6.1.4.1.3711.15.1.1.1.1.4 |
rms-cTemp1Thresholds OBJECT IDENTIFIER .1.3.6.1.4.1.3711.15.1.1.1.1.5 |
rms-cTemp1LowerControlLevelThe Lower Limit temperature threshold in 0.1 degreesrw INTEGER (-200..1000) .1.3.6.1.4.1.3711.15.1.1.1.1.5.1 |
rms-cTemp1LowerWarningLevelThe Lower Control temperature threshold in 0.1 degreesrw INTEGER (-200..1000) .1.3.6.1.4.1.3711.15.1.1.1.1.5.2 |
rms-cTemp1UpperWarningLevelThe Upper Control temperature threshold in 0.1 degreesrw INTEGER (-200..1000) .1.3.6.1.4.1.3711.15.1.1.1.1.5.3 |
rms-cTemp1UpperControlLevelThe Upper Limit temperature threshold in 0.1 degreesrw INTEGER (-200..1000) .1.3.6.1.4.1.3711.15.1.1.1.1.5.4 |
rms-cTemp1OFFtoONtraps OBJECT IDENTIFIER .1.3.6.1.4.1.3711.15.1.1.1.1.6 |
rms-cTemp1OFFtoONtrapLCLSet to 0 for trap disabled, 1 for enabledrw Enumeration .1.3.6.1.4.1.3711.15.1.1.1.1.6.1 |
rms-cTemp1OFFtoONontrapLWLSet to 0 for trap disabled, 1 for enabledrw Enumeration .1.3.6.1.4.1.3711.15.1.1.1.1.6.2 |
rms-cTemp1OFFtoONtrapUWLSet to 0 for trap disabled, 1 for enabledrw Enumeration .1.3.6.1.4.1.3711.15.1.1.1.1.6.3 |
rms-cTemp1OFFtoONtrapUCLSet to 0 for trap disabled, 1 for enabledrw Enumeration .1.3.6.1.4.1.3711.15.1.1.1.1.6.4 |
rms-cTemp1OFFtoONrepeatTimers OBJECT IDENTIFIER .1.3.6.1.4.1.3711.15.1.1.1.1.7 |
rms-cTemp1OFFtoONrepLCLSet to 0 for no repetion after the first trap is sent, any other integer for the interval in minutesrw INTEGER .1.3.6.1.4.1.3711.15.1.1.1.1.7.1 |
rms-cTemp1OFFtoONrepLWLSet to 0 for no repetion after the first trap is sent, any other integer for the interval in minutesrw INTEGER .1.3.6.1.4.1.3711.15.1.1.1.1.7.2 |
rms-cTemp1OFFtoONrepUWLSet to 0 for no repetion after the first trap is sent, any other integer for the interval in minutesrw INTEGER .1.3.6.1.4.1.3711.15.1.1.1.1.7.3 |
rms-cTemp1OFFtoONrepUCLSet to 0 for no repetion after the first trap is sent, any other integer for the interval in minutesrw INTEGER .1.3.6.1.4.1.3711.15.1.1.1.1.7.4 |
rms-cTemp1ONtoOFFtraps OBJECT IDENTIFIER .1.3.6.1.4.1.3711.15.1.1.1.1.8 |
rms-cTemp1ONtoOFFtrapLCLSet to 0 for trap disabled, 1 for enabledrw Enumeration .1.3.6.1.4.1.3711.15.1.1.1.1.8.1 |
rms-cTemp1ONtoOFFtrapLWLSet to 0 for trap disabled, 1 for enabledrw Enumeration .1.3.6.1.4.1.3711.15.1.1.1.1.8.2 |
rms-cTemp1ONtoOFFtrapUWLSet to 0 for trap disabled, 1 for enabledrw Enumeration .1.3.6.1.4.1.3711.15.1.1.1.1.8.3 |
rms-cTemp1ONtoOFFtrapUCLSet to 0 for trap disabled, 1 for enabledrw Enumeration .1.3.6.1.4.1.3711.15.1.1.1.1.8.4 |
rms-cTemp1ONtoOFFrepeatTimers OBJECT IDENTIFIER .1.3.6.1.4.1.3711.15.1.1.1.1.9 |
rms-cTemp1ONtoOFFrepLCLSet to 0 for no repetion after the first trap is sent, any other integer for the interval in secondsrw INTEGER .1.3.6.1.4.1.3711.15.1.1.1.1.9.1 |
rms-cTemp1ONtoOFFrepLWLSet to 0 for no repetion after the first trap is sent, any other integer for the interval in secondsrw INTEGER .1.3.6.1.4.1.3711.15.1.1.1.1.9.2 |
rms-cTemp1ONtoOFFrepUWLSet to 0 for no repetion after the first trap is sent, any other integer for the interval in secondsrw INTEGER .1.3.6.1.4.1.3711.15.1.1.1.1.9.3 |
rms-cTemp1ONtoOFFrepUCLSet to 0 for no repetion after the first trap is sent, any other integer for the interval in secondsrw INTEGER .1.3.6.1.4.1.3711.15.1.1.1.1.9.4 |
rms-cHumid1 OBJECT IDENTIFIER .1.3.6.1.4.1.3711.15.1.1.1.2 |
rms-cHumid1EnableMonitoringSetting to one enables monitoring of Humidityrw Enumeration .1.3.6.1.4.1.3711.15.1.1.1.2.1 |
rms-cHumid1NameThe name of the humidity readingrw DisplayString .1.3.6.1.4.1.3711.15.1.1.1.2.2 |
rms-cHumid1CalibrationOffsetCalibration offset in 0.1 percentrw INTEGER (-100..100) .1.3.6.1.4.1.3711.15.1.1.1.2.3 |
rms-cHumid1CurrentThe current humidity reading in 0.1%ro INTEGER (-200..1000) .1.3.6.1.4.1.3711.15.1.1.1.2.4 |
rms-cHumid1Thresholds OBJECT IDENTIFIER .1.3.6.1.4.1.3711.15.1.1.1.2.5 |
rms-cHumid1LowerControlLevelThe Lower Limit Humidity threshold in 0.1 percentrw INTEGER (-200..1000) .1.3.6.1.4.1.3711.15.1.1.1.2.5.1 |
rms-cHumid1LowerWarningLevelThe Lower Control humidity threshold in 0.1 percentrw INTEGER (-200..1000) .1.3.6.1.4.1.3711.15.1.1.1.2.5.2 |
rms-cHumid1UpperWarningLevelThe Upper Control humidity threshold in 0.1 percentrw INTEGER (-200..1000) .1.3.6.1.4.1.3711.15.1.1.1.2.5.3 |
rms-cHumid1UpperControlLevelThe Upper Limit humidity threshold in 0.1 percentrw INTEGER (-200..1000) .1.3.6.1.4.1.3711.15.1.1.1.2.5.4 |
rms-cHumid1OFFtoONtraps OBJECT IDENTIFIER .1.3.6.1.4.1.3711.15.1.1.1.2.6 |
rms-cHumid1OFFtoONtrapLCLSet to 0 for trap disabled, 1 for enabledrw Enumeration .1.3.6.1.4.1.3711.15.1.1.1.2.6.1 |
rms-cHumid1OFFtoONtrapLWLSet to 0 for trap disabled, 1 for enabledrw Enumeration .1.3.6.1.4.1.3711.15.1.1.1.2.6.2 |
rms-cHumid1OFFtoONtrapUWLSet to 0 for trap disabled, 1 for enabledrw Enumeration .1.3.6.1.4.1.3711.15.1.1.1.2.6.3 |
rms-cHumid1OFFtoONtrapUCLSet to 0 for trap disabled, 1 for enabledrw Enumeration .1.3.6.1.4.1.3711.15.1.1.1.2.6.4 |
rms-cHumid1OFFtoONrepeatTimers OBJECT IDENTIFIER .1.3.6.1.4.1.3711.15.1.1.1.2.7 |
rms-cHumid1OFFtoONrepLCLSet to 0 for no repetion after the first trap is sent, any other integer for the interval in secondsrw INTEGER .1.3.6.1.4.1.3711.15.1.1.1.2.7.1 |
rms-cHumid1OFFtoONrepLWLSet to 0 for no repetion after the first trap is sent, any other integer for the interval in secondsrw INTEGER .1.3.6.1.4.1.3711.15.1.1.1.2.7.2 |
rms-cHumid1OFFtoONrepUWLSet to 0 for no repetion after the first trap is sent, any other integer for the interval in secondsrw INTEGER .1.3.6.1.4.1.3711.15.1.1.1.2.7.3 |
rms-cHumid1OFFtoONrepUCLSet to 0 for no repetion after the first trap is sent, any other integer for the interval in secondsrw INTEGER .1.3.6.1.4.1.3711.15.1.1.1.2.7.4 |
rms-cHumid1ONtoOFFtraps OBJECT IDENTIFIER .1.3.6.1.4.1.3711.15.1.1.1.2.8 |
rms-cHumid1ONtoOFFtrapLCLSet to 0 for trap disabled, 1 for enabledrw Enumeration .1.3.6.1.4.1.3711.15.1.1.1.2.8.1 |
rms-cHumid1ONtoOFFtrapLWLSet to 0 for trap disabled, 1 for enabledrw Enumeration .1.3.6.1.4.1.3711.15.1.1.1.2.8.2 |
rms-cHumid1ONtoOFFtrapUWLSet to 0 for trap disabled, 1 for enabledrw Enumeration .1.3.6.1.4.1.3711.15.1.1.1.2.8.3 |
rms-cHumid1ONtoOFFtrapUCLSet to 0 for trap disabled, 1 for enabledrw Enumeration .1.3.6.1.4.1.3711.15.1.1.1.2.8.4 |
rms-cHumid1ONtoOFFrepeatTimers OBJECT IDENTIFIER .1.3.6.1.4.1.3711.15.1.1.1.2.9 |
rms-cHumid1ONtoOFFrepLCLSet to 0 for no repetion after the first trap is sent, any other integer for the interval in secondsrw INTEGER .1.3.6.1.4.1.3711.15.1.1.1.2.9.1 |
rms-cHumid1ONtoOFFrepLWLSet to 0 for no repetion after the first trap is sent, any other integer for the interval in secondsrw INTEGER .1.3.6.1.4.1.3711.15.1.1.1.2.9.2 |
rms-cHumid1ONtoOFFrepUWLSet to 0 for no repetion after the first trap is sent, any other integer for the interval in secondsrw INTEGER .1.3.6.1.4.1.3711.15.1.1.1.2.9.3 |
rms-cHumid1ONtoOFFrepUCLSet to 0 for no repetion after the first trap is sent, any other integer for the interval in secondsrw INTEGER .1.3.6.1.4.1.3711.15.1.1.1.2.9.4 |
rms-cTemp2 OBJECT IDENTIFIER .1.3.6.1.4.1.3711.15.1.1.1.3 |
rms-cTemp2EnableMonitoringSetting to one enables monitoring of Temperaturerw Enumeration .1.3.6.1.4.1.3711.15.1.1.1.3.1 |
rms-cTemp2NameThe name of the temperature readingrw DisplayString .1.3.6.1.4.1.3711.15.1.1.1.3.2 |
rms-cTemp2CalibrationOffsetCalibration offset in 0.1 degreesrw INTEGER (-100..100) .1.3.6.1.4.1.3711.15.1.1.1.3.3 |
rms-cTemp2CurrentThe current temperature reading in 0.1%ro INTEGER (-200..1000) .1.3.6.1.4.1.3711.15.1.1.1.3.4 |
rms-cTemp2Thresholds OBJECT IDENTIFIER .1.3.6.1.4.1.3711.15.1.1.1.3.5 |
rms-cTemp2LowerControlLevelThe Lower Limit temperature threshold in 0.1 degreesrw INTEGER (-200..1000) .1.3.6.1.4.1.3711.15.1.1.1.3.5.1 |
rms-cTemp2LowerWarningLevelThe Lower Control temperature threshold in 0.1 degreesrw INTEGER (-200..1000) .1.3.6.1.4.1.3711.15.1.1.1.3.5.2 |
rms-cTemp2UpperWarningLevelThe Upper Control temperature threshold in 0.1 degreesrw INTEGER (-200..1000) .1.3.6.1.4.1.3711.15.1.1.1.3.5.3 |
rms-cTemp2UpperControlLevelThe Upper Limit temperature threshold in 0.1 degreesrw INTEGER (-200..1000) .1.3.6.1.4.1.3711.15.1.1.1.3.5.4 |
rms-cTemp2OFFtoONtraps OBJECT IDENTIFIER .1.3.6.1.4.1.3711.15.1.1.1.3.6 |
rms-cTemp2OFFtoONtrapLCLSet to 0 for trap disabled, 1 for enabledrw Enumeration .1.3.6.1.4.1.3711.15.1.1.1.3.6.1 |
rms-cTemp2OFFtoONontrapLWLSet to 0 for trap disabled, 1 for enabledrw Enumeration .1.3.6.1.4.1.3711.15.1.1.1.3.6.2 |
rms-cTemp2OFFtoONtrapUWLSet to 0 for trap disabled, 1 for enabledrw Enumeration .1.3.6.1.4.1.3711.15.1.1.1.3.6.3 |
rms-cTemp2OFFtoONtrapUCLSet to 0 for trap disabled, 1 for enabledrw Enumeration .1.3.6.1.4.1.3711.15.1.1.1.3.6.4 |
rms-cTemp2OFFtoONrepeatTimers OBJECT IDENTIFIER .1.3.6.1.4.1.3711.15.1.1.1.3.7 |
rms-cTemp2OFFtoONrepLCLSet to 0 for no repetion after the first trap is sent, any other integer for the interval in secondsrw INTEGER .1.3.6.1.4.1.3711.15.1.1.1.3.7.1 |
rms-cTemp2OFFtoONrepLWLSet to 0 for no repetion after the first trap is sent, any other integer for the interval in secondsrw INTEGER .1.3.6.1.4.1.3711.15.1.1.1.3.7.2 |
rms-cTemp2OFFtoONrepUWLSet to 0 for no repetion after the first trap is sent, any other integer for the interval in secondsrw INTEGER .1.3.6.1.4.1.3711.15.1.1.1.3.7.3 |
rms-cTemp2OFFtoONrepUCLSet to 0 for no repetion after the first trap is sent, any other integer for the interval in secondsrw INTEGER .1.3.6.1.4.1.3711.15.1.1.1.3.7.4 |
rms-cTemp2ONtoOFFtraps OBJECT IDENTIFIER .1.3.6.1.4.1.3711.15.1.1.1.3.8 |
rms-cTemp2ONtoOFFtrapLCLSet to 0 for trap disabled, 1 for enabledrw Enumeration .1.3.6.1.4.1.3711.15.1.1.1.3.8.1 |
rms-cTemp2ONtoOFFtrapLWLSet to 0 for trap disabled, 1 for enabledrw Enumeration .1.3.6.1.4.1.3711.15.1.1.1.3.8.2 |
rms-cTemp2ONtoOFFtrapUWLSet to 0 for trap disabled, 1 for enabledrw Enumeration .1.3.6.1.4.1.3711.15.1.1.1.3.8.3 |
rms-cTemp2ONtoOFFtrapUCLSet to 0 for trap disabled, 1 for enabledrw Enumeration .1.3.6.1.4.1.3711.15.1.1.1.3.8.4 |
rms-cTemp2ONtoOFFrepeatTimers OBJECT IDENTIFIER .1.3.6.1.4.1.3711.15.1.1.1.3.9 |
rms-cTemp2ONtoOFFrepLCLSet to 0 for no repetion after the first trap is sent, any other integer for the interval in secondsrw INTEGER .1.3.6.1.4.1.3711.15.1.1.1.3.9.1 |
rms-cTemp2ONtoOFFrepLWLSet to 0 for no repetion after the first trap is sent, any other integer for the interval in secondsrw INTEGER .1.3.6.1.4.1.3711.15.1.1.1.3.9.2 |
rms-cTemp2ONtoOFFrepUWLSet to 0 for no repetion after the first trap is sent, any other integer for the interval in secondsrw INTEGER .1.3.6.1.4.1.3711.15.1.1.1.3.9.3 |
rms-cTemp2ONtoOFFrepUCLSet to 0 for no repetion after the first trap is sent, any other integer for the interval in secondsrw INTEGER .1.3.6.1.4.1.3711.15.1.1.1.3.9.4 |
rms-cHumid2 OBJECT IDENTIFIER .1.3.6.1.4.1.3711.15.1.1.1.4 |
rms-cHumid2EnableMonitoringSetting to one enables monitoring of Humidityrw Enumeration .1.3.6.1.4.1.3711.15.1.1.1.4.1 |
rms-cHumid2NameThe name of the humidity readingrw DisplayString .1.3.6.1.4.1.3711.15.1.1.1.4.2 |
rms-cHumid2CalibrationOffsetCalibration offset in 0.1 percentrw INTEGER (-100..100) .1.3.6.1.4.1.3711.15.1.1.1.4.3 |
rms-cHumid2CurrentThe current humidity reading in 0.1%ro INTEGER (-200..1000) .1.3.6.1.4.1.3711.15.1.1.1.4.4 |
rms-cHumid2Thresholds OBJECT IDENTIFIER .1.3.6.1.4.1.3711.15.1.1.1.4.5 |
rms-cHumid2LowerControlLevelThe Lower Limit Humidity threshold in 0.1 percentrw INTEGER (-200..1000) .1.3.6.1.4.1.3711.15.1.1.1.4.5.1 |
rms-cHumid2LowerWarningLevelThe Lower Control humidity threshold in 0.1 percentrw INTEGER (-200..1000) .1.3.6.1.4.1.3711.15.1.1.1.4.5.2 |
rms-cHumid2UpperWarningLevelThe Upper Control humidity threshold in 0.1 percentrw INTEGER (-200..1000) .1.3.6.1.4.1.3711.15.1.1.1.4.5.3 |
rms-cHumid2UpperControlLevelThe Upper Limit humidity threshold in 0.1 percentrw INTEGER (-200..1000) .1.3.6.1.4.1.3711.15.1.1.1.4.5.4 |
rms-cHumid2OFFtoONtraps OBJECT IDENTIFIER .1.3.6.1.4.1.3711.15.1.1.1.4.6 |
rms-cHumid2OFFtoONtrapLCLSet to 0 for trap disabled, 1 for enabledrw Enumeration .1.3.6.1.4.1.3711.15.1.1.1.4.6.1 |
rms-cHumid2OFFtoONtrapLWLSet to 0 for trap disabled, 1 for enabledrw Enumeration .1.3.6.1.4.1.3711.15.1.1.1.4.6.2 |
rms-cHumid2OFFtoONtrapUWLSet to 0 for trap disabled, 1 for enabledrw Enumeration .1.3.6.1.4.1.3711.15.1.1.1.4.6.3 |
rms-cHumid2OFFtoONtrapUCLSet to 0 for trap disabled, 1 for enabledrw Enumeration .1.3.6.1.4.1.3711.15.1.1.1.4.6.4 |
rms-cHumid2OFFtoONrepeatTimers OBJECT IDENTIFIER .1.3.6.1.4.1.3711.15.1.1.1.4.7 |
rms-cHumid2OFFtoONrepLCLSet to 0 for no repetion after the first trap is sent, any other integer for the interval in secondsrw INTEGER .1.3.6.1.4.1.3711.15.1.1.1.4.7.1 |
rms-cHumid2OFFtoONrepLWLSet to 0 for no repetion after the first trap is sent, any other integer for the interval in secondsrw INTEGER .1.3.6.1.4.1.3711.15.1.1.1.4.7.2 |
rms-cHumid2OFFtoONrepUWLSet to 0 for no repetion after the first trap is sent, any other integer for the interval in secondsrw INTEGER .1.3.6.1.4.1.3711.15.1.1.1.4.7.3 |
rms-cHumid2OFFtoONrepUCLSet to 0 for no repetion after the first trap is sent, any other integer for the interval in secondsrw INTEGER .1.3.6.1.4.1.3711.15.1.1.1.4.7.4 |
rms-cHumid2ONtoOFFtraps OBJECT IDENTIFIER .1.3.6.1.4.1.3711.15.1.1.1.4.8 |
rms-cHumid2ONtoOFFtrapLCLSet to 0 for trap disabled, 1 for enabledrw Enumeration .1.3.6.1.4.1.3711.15.1.1.1.4.8.1 |
rms-cHumid2ONtoOFFtrapLWLSet to 0 for trap disabled, 1 for enabledrw Enumeration .1.3.6.1.4.1.3711.15.1.1.1.4.8.2 |
rms-cHumid2ONtoOFFtrapUWLSet to 0 for trap disabled, 1 for enabledrw Enumeration .1.3.6.1.4.1.3711.15.1.1.1.4.8.3 |
rms-cHumid2ONtoOFFtrapUCLSet to 0 for trap disabled, 1 for enabledrw Enumeration .1.3.6.1.4.1.3711.15.1.1.1.4.8.4 |
rms-cHumid2ONtoOFFrepeatTimers OBJECT IDENTIFIER .1.3.6.1.4.1.3711.15.1.1.1.4.9 |
rms-cHumid2ONtoOFFrepLCLSet to 0 for no repetion after the first trap is sent, any other integer for the interval in secondsrw INTEGER .1.3.6.1.4.1.3711.15.1.1.1.4.9.1 |
rms-cHumid2ONtoOFFrepLWLSet to 0 for no repetion after the first trap is sent, any other integer for the interval in secondsrw INTEGER .1.3.6.1.4.1.3711.15.1.1.1.4.9.2 |
rms-cHumid2ONtoOFFrepUWLSet to 0 for no repetion after the first trap is sent, any other integer for the interval in secondsrw INTEGER .1.3.6.1.4.1.3711.15.1.1.1.4.9.3 |
rms-cHumid2ONtoOFFrepUCLSet to 0 for no repetion after the first trap is sent, any other integer for the interval in secondsrw INTEGER .1.3.6.1.4.1.3711.15.1.1.1.4.9.4 |
rms-cContact OBJECT IDENTIFIER .1.3.6.1.4.1.3711.15.1.1.2 |
rms-cContactNames OBJECT IDENTIFIER .1.3.6.1.4.1.3711.15.1.1.2.1 |
rms-cContact1NameThe name of the contactrw DisplayString .1.3.6.1.4.1.3711.15.1.1.2.1.1 |
rms-cContact2NameThe name of the contactrw DisplayString .1.3.6.1.4.1.3711.15.1.1.2.1.2 |
rms-cContact3NameThe name of the contactrw DisplayString .1.3.6.1.4.1.3711.15.1.1.2.1.3 |
rms-cContact4NameThe name of the contactrw DisplayString .1.3.6.1.4.1.3711.15.1.1.2.1.4 |
rms-cContact5NameThe name of the contactrw DisplayString .1.3.6.1.4.1.3711.15.1.1.2.1.5 |
rms-cContact6NameThe name of the contactrw DisplayString .1.3.6.1.4.1.3711.15.1.1.2.1.6 |
rms-cContact7NameThe name of the contactrw DisplayString .1.3.6.1.4.1.3711.15.1.1.2.1.7 |
rms-cContact8NameThe name of the contactrw DisplayString .1.3.6.1.4.1.3711.15.1.1.2.1.8 |
rms-cContactType OBJECT IDENTIFIER .1.3.6.1.4.1.3711.15.1.1.2.2 |
rms-cContact1TypeLevel or posedge or negedge input detectionrw Enumeration .1.3.6.1.4.1.3711.15.1.1.2.2.1 |
rms-cContact2TypeLevel or posedge or negedge input detectionrw Enumeration .1.3.6.1.4.1.3711.15.1.1.2.2.2 |
rms-cContact3TypeLevel or posedge or negedge input detectionrw Enumeration .1.3.6.1.4.1.3711.15.1.1.2.2.3 |
rms-cContact4TypeLevel or posedge or negedge input detectionrw Enumeration .1.3.6.1.4.1.3711.15.1.1.2.2.4 |
rms-cContact5TypeLevel or posedge or negedge input detectionrw Enumeration .1.3.6.1.4.1.3711.15.1.1.2.2.5 |
rms-cContact6TypeLevel or posedge or negedge input detectionrw Enumeration .1.3.6.1.4.1.3711.15.1.1.2.2.6 |
rms-cContact7TypeLevel or posedge or negedge input detectionrw Enumeration .1.3.6.1.4.1.3711.15.1.1.2.2.7 |
rms-cContact8TypeLevel or posedge or negedge input detectionrw Enumeration .1.3.6.1.4.1.3711.15.1.1.2.2.8 |
rms-cContactReset OBJECT IDENTIFIER .1.3.6.1.4.1.3711.15.1.1.2.3 |
rms-cContact1ResetResets edge triggered inputrw Enumeration .1.3.6.1.4.1.3711.15.1.1.2.3.1 |
rms-cContact2ResetResets edge triggered inputrw Enumeration .1.3.6.1.4.1.3711.15.1.1.2.3.2 |
rms-cContact3ResetResets edge triggered inputrw Enumeration .1.3.6.1.4.1.3711.15.1.1.2.3.3 |
rms-cContact4ResetResets edge triggered inputrw Enumeration .1.3.6.1.4.1.3711.15.1.1.2.3.4 |
rms-cContact5ResetResets edge triggered inputrw Enumeration .1.3.6.1.4.1.3711.15.1.1.2.3.5 |
rms-cContact6ResetResets edge triggered inputrw Enumeration .1.3.6.1.4.1.3711.15.1.1.2.3.6 |
rms-cContact7ResetResets edge triggered inputrw Enumeration .1.3.6.1.4.1.3711.15.1.1.2.3.7 |
rms-cContact8ResetResets edge triggered inputrw Enumeration .1.3.6.1.4.1.3711.15.1.1.2.3.8 |
rms-cContactNormalStates OBJECT IDENTIFIER .1.3.6.1.4.1.3711.15.1.1.2.4 |
rms-cContact1NormalStateSet to 0 for normally open condition, 1 for normally closedrw Enumeration .1.3.6.1.4.1.3711.15.1.1.2.4.1 |
rms-cContact2NormalStateSet to 0 for normally open condition, 1 for normally closedrw Enumeration .1.3.6.1.4.1.3711.15.1.1.2.4.2 |
rms-cContact3NormalStateSet to 0 for normally open condition, 1 for normally closedrw Enumeration .1.3.6.1.4.1.3711.15.1.1.2.4.3 |
rms-cContact4NormalStateSet to 0 for normally open condition, 1 for normally closedrw Enumeration .1.3.6.1.4.1.3711.15.1.1.2.4.4 |
rms-cContact5NormalStateSet to 0 for normally open condition, 1 for normally closedrw Enumeration .1.3.6.1.4.1.3711.15.1.1.2.4.5 |
rms-cContact6NormalStateSet to 0 for normally open condition, 1 for normally closedrw Enumeration .1.3.6.1.4.1.3711.15.1.1.2.4.6 |
rms-cContact7NormalStateSet to 0 for normally open condition, 1 for normally closedrw Enumeration .1.3.6.1.4.1.3711.15.1.1.2.4.7 |
rms-cContact8NormalStateSet to 0 for normally open condition, 1 for normally closedrw Enumeration .1.3.6.1.4.1.3711.15.1.1.2.4.8 |
rms-cContactCurrentStates OBJECT IDENTIFIER .1.3.6.1.4.1.3711.15.1.1.2.5 |
rms-cContact1CurrentStateThe current state of the contactro Enumeration .1.3.6.1.4.1.3711.15.1.1.2.5.1 |
rms-cContact2CurrentStateThe current state of the contactro Enumeration .1.3.6.1.4.1.3711.15.1.1.2.5.2 |
rms-cContact3CurrentStateThe current state of the contactro Enumeration .1.3.6.1.4.1.3711.15.1.1.2.5.3 |
rms-cContact4CurrentStateThe current state of the contactro Enumeration .1.3.6.1.4.1.3711.15.1.1.2.5.4 |
rms-cContact5CurrentStateThe current state of the contactro Enumeration .1.3.6.1.4.1.3711.15.1.1.2.5.5 |
rms-cContact6CurrentStateThe current state of the contactro Enumeration .1.3.6.1.4.1.3711.15.1.1.2.5.6 |
rms-cContact7CurrentStateThe current state of the contactro Enumeration .1.3.6.1.4.1.3711.15.1.1.2.5.7 |
rms-cContact8CurrentStateThe current state of the contactro Enumeration .1.3.6.1.4.1.3711.15.1.1.2.5.8 |
rms-cContactOFFtoONtraps OBJECT IDENTIFIER .1.3.6.1.4.1.3711.15.1.1.2.6 |
rms-cContact1OFFtoONtrapSet to 0 for trap disabled, 1 for enabledrw Enumeration .1.3.6.1.4.1.3711.15.1.1.2.6.1 |
rms-cContact2OFFtoONtrapSet to 0 for trap disabled, 1 for enabledrw Enumeration .1.3.6.1.4.1.3711.15.1.1.2.6.2 |
rms-cContact3OFFtoONtrapSet to 0 for trap disabled, 1 for enabledrw Enumeration .1.3.6.1.4.1.3711.15.1.1.2.6.3 |
rms-cContact4OFFtoONtrapSet to 0 for trap disabled, 1 for enabledrw Enumeration .1.3.6.1.4.1.3711.15.1.1.2.6.4 |
rms-cContact5OFFtoONtrapSet to 0 for trap disabled, 1 for enabledrw Enumeration .1.3.6.1.4.1.3711.15.1.1.2.6.5 |
rms-cContact6OFFtoONtrapSet to 0 for trap disabled, 1 for enabledrw Enumeration .1.3.6.1.4.1.3711.15.1.1.2.6.6 |
rms-cContact7OFFtoONtrapSet to 0 for trap disabled, 1 for enabledrw Enumeration .1.3.6.1.4.1.3711.15.1.1.2.6.7 |
rms-cContact8OFFtoONtrapSet to 0 for trap disabled, 1 for enabledrw Enumeration .1.3.6.1.4.1.3711.15.1.1.2.6.8 |
rms-cContactOFFtoONrepeatTimers OBJECT IDENTIFIER .1.3.6.1.4.1.3711.15.1.1.2.7 |
rms-cContact1OFFtoONrepSet to 0 for no repetion after the first trap is sent, any other integer for the interval in secondsrw INTEGER .1.3.6.1.4.1.3711.15.1.1.2.7.1 |
rms-cContact2OFFtoONrepSet to 0 for no repetion after the first trap is sent, any other integer for the interval in secondsrw INTEGER .1.3.6.1.4.1.3711.15.1.1.2.7.2 |
rms-cContact3OFFtoONrepSet to 0 for no repetion after the first trap is sent, any other integer for the interval in secondsrw INTEGER .1.3.6.1.4.1.3711.15.1.1.2.7.3 |
rms-cContact4OFFtoONrepSet to 0 for no repetion after the first trap is sent, any other integer for the interval in secondsrw INTEGER .1.3.6.1.4.1.3711.15.1.1.2.7.4 |
rms-cContact5OFFtoONrepSet to 0 for no repetion after the first trap is sent, any other integer for the interval in secondsrw INTEGER .1.3.6.1.4.1.3711.15.1.1.2.7.5 |
rms-cContact6OFFtoONrepSet to 0 for no repetion after the first trap is sent, any other integer for the interval in secondsrw INTEGER .1.3.6.1.4.1.3711.15.1.1.2.7.6 |
rms-cContact7OFFtoONrepSet to 0 for no repetion after the first trap is sent, any other integer for the interval in secondsrw INTEGER .1.3.6.1.4.1.3711.15.1.1.2.7.7 |
rms-cContact8OFFtoONrepSet to 0 for no repetion after the first trap is sent, any other integer for the interval in secondsrw INTEGER .1.3.6.1.4.1.3711.15.1.1.2.7.8 |
rms-cContactONtoOFFtraps OBJECT IDENTIFIER .1.3.6.1.4.1.3711.15.1.1.2.8 |
rms-cContact1ONtoOFFtrapSet to 0 for trap disabled, 1 for enabledrw Enumeration .1.3.6.1.4.1.3711.15.1.1.2.8.1 |
rms-cContact2ONtoOFFtrapSet to 0 for trap disabled, 1 for enabledrw Enumeration .1.3.6.1.4.1.3711.15.1.1.2.8.2 |
rms-cContact3ONtoOFFtrapSet to 0 for trap disabled, 1 for enabledrw Enumeration .1.3.6.1.4.1.3711.15.1.1.2.8.3 |
rms-cContact4ONtoOFFtrapSet to 0 for trap disabled, 1 for enabledrw Enumeration .1.3.6.1.4.1.3711.15.1.1.2.8.4 |
rms-cContact5ONtoOFFtrapSet to 0 for trap disabled, 1 for enabledrw Enumeration .1.3.6.1.4.1.3711.15.1.1.2.8.5 |
rms-cContact6ONtoOFFtrapSet to 0 for trap disabled, 1 for enabledrw Enumeration .1.3.6.1.4.1.3711.15.1.1.2.8.6 |
rms-cContact7ONtoOFFtrapSet to 0 for trap disabled, 1 for enabledrw Enumeration .1.3.6.1.4.1.3711.15.1.1.2.8.7 |
rms-cContact8ONtoOFFtrapSet to 0 for trap disabled, 1 for enabledrw Enumeration .1.3.6.1.4.1.3711.15.1.1.2.8.8 |
rms-cContactONtoOFFrepeatTimers OBJECT IDENTIFIER .1.3.6.1.4.1.3711.15.1.1.2.9 |
rms-cContact1ONtoOFFrepSet to 0 for no repetion after the first trap is sent, any other integer for the interval in secondsrw INTEGER .1.3.6.1.4.1.3711.15.1.1.2.9.1 |
rms-cContact2ONtoOFFrepSet to 0 for no repetion after the first trap is sent, any other integer for the interval in secondsrw INTEGER .1.3.6.1.4.1.3711.15.1.1.2.9.2 |
rms-cContact3ONtoOFFrepSet to 0 for no repetion after the first trap is sent, any other integer for the interval in secondsrw INTEGER .1.3.6.1.4.1.3711.15.1.1.2.9.3 |
rms-cContact4ONtoOFFrepSet to 0 for no repetion after the first trap is sent, any other integer for the interval in secondsrw INTEGER .1.3.6.1.4.1.3711.15.1.1.2.9.4 |
rms-cContact5ONtoOFFrepSet to 0 for no repetion after the first trap is sent, any other integer for the interval in secondsrw INTEGER .1.3.6.1.4.1.3711.15.1.1.2.9.5 |
rms-cContact6ONtoOFFrepSet to 0 for no repetion after the first trap is sent, any other integer for the interval in secondsrw INTEGER .1.3.6.1.4.1.3711.15.1.1.2.9.6 |
rms-cContact7ONtoOFFrepSet to 0 for no repetion after the first trap is sent, any other integer for the interval in secondsrw INTEGER .1.3.6.1.4.1.3711.15.1.1.2.9.7 |
rms-cContact8ONtoOFFrepSet to 0 for no repetion after the first trap is sent, any other integer for the interval in secondsrw INTEGER .1.3.6.1.4.1.3711.15.1.1.2.9.8 |
rms-cOutput OBJECT IDENTIFIER .1.3.6.1.4.1.3711.15.1.1.3 |
rms-cOutputEnables OBJECT IDENTIFIER .1.3.6.1.4.1.3711.15.1.1.3.1 |
rms-cOutput1EnableSet to one enables the outputrw Enumeration .1.3.6.1.4.1.3711.15.1.1.3.1.1 |
rms-cOutput2EnableSet to one enables the outputrw Enumeration .1.3.6.1.4.1.3711.15.1.1.3.1.2 |
rms-cOutput3EnableSet to one enables the outputrw Enumeration .1.3.6.1.4.1.3711.15.1.1.3.1.3 |
rms-cOutputNames OBJECT IDENTIFIER .1.3.6.1.4.1.3711.15.1.1.3.2 |
rms-cOutput1NameThe name of the outputrw DisplayString .1.3.6.1.4.1.3711.15.1.1.3.2.1 |
rms-cOutput2NameThe name of the outputrw DisplayString .1.3.6.1.4.1.3711.15.1.1.3.2.2 |
rms-cOutput3NameThe name of the outputrw DisplayString .1.3.6.1.4.1.3711.15.1.1.3.2.3 |
rms-cOutput4NameThe name of the outputrw DisplayString .1.3.6.1.4.1.3711.15.1.1.3.2.4 |
rms-cOutputStates OBJECT IDENTIFIER .1.3.6.1.4.1.3711.15.1.1.3.3 |
rms-cOutput1StateDefault State for the outputrw Enumeration .1.3.6.1.4.1.3711.15.1.1.3.3.1 |
rms-cOutput2StateDefault State for the outputrw Enumeration .1.3.6.1.4.1.3711.15.1.1.3.3.2 |
rms-cOutput3StateDefault State for the outputrw Enumeration .1.3.6.1.4.1.3711.15.1.1.3.3.3 |
rms-cOutputBooleanStates OBJECT IDENTIFIER .1.3.6.1.4.1.3711.15.1.1.3.4 |
rms-cOutput1BooleanStateSet as a result of the AND/OR comparisonro Enumeration .1.3.6.1.4.1.3711.15.1.1.3.4.1 |
rms-cOutput2BooleanStateSet as a result of the AND/OR comparisonro Enumeration .1.3.6.1.4.1.3711.15.1.1.3.4.2 |
rms-cOutput3BooleanStateSet as a result of the AND/OR comparisonro Enumeration .1.3.6.1.4.1.3711.15.1.1.3.4.3 |
rms-cOutput4BooleanStateSet as a result of the AND/OR comparisonro Enumeration .1.3.6.1.4.1.3711.15.1.1.3.4.4 |
rms-cOutputOnDelay OBJECT IDENTIFIER .1.3.6.1.4.1.3711.15.1.1.3.5 |
rms-cOutput1OnDelayDelay in seconds for the activation of the output in response to a change into the on staterw INTEGER .1.3.6.1.4.1.3711.15.1.1.3.5.1 |
rms-cOutput2OnDelayDelay in seconds for the activation of the output in response to a change into the on staterw INTEGER .1.3.6.1.4.1.3711.15.1.1.3.5.2 |
rms-cOutput3OnDelayDelay in seconds for the activation of the output in response to a change into the on staterw INTEGER .1.3.6.1.4.1.3711.15.1.1.3.5.3 |
rms-cOutput4OnDelayDelay in seconds for the activation of the output in response to a change into the on staterw INTEGER .1.3.6.1.4.1.3711.15.1.1.3.5.4 |
rms-cOutputOffDelay OBJECT IDENTIFIER .1.3.6.1.4.1.3711.15.1.1.3.6 |
rms-cOutput1OffDelayDelay in seconds for the activation of the output in response to a change into the OFF staterw INTEGER .1.3.6.1.4.1.3711.15.1.1.3.6.1 |
rms-cOutput2OffDelayDelay in seconds for the activation of the output in response to a change into the OFF staterw INTEGER .1.3.6.1.4.1.3711.15.1.1.3.6.2 |
rms-cOutput3OffDelayDelay in seconds for the activation of the output in response to a change into the OFF staterw INTEGER .1.3.6.1.4.1.3711.15.1.1.3.6.3 |
rms-cOutput4OffDelayDelay in seconds for the activation of the output in response to a change into the OFF staterw INTEGER .1.3.6.1.4.1.3711.15.1.1.3.6.4 |
rms-cOutputStrings OBJECT IDENTIFIER .1.3.6.1.4.1.3711.15.1.1.3.7 |
rms-cOutput1BooleanInputTn=temperature source, n is one of the following subindex:1->Temp1 LCL,2->Temp1 LWL,
3->Temp1 UWL,4->Temp1 UCL,5->Temp2 LCL,6->Temp2 LWL,7->Temp2 UWL,8->Temp2 UCL.
Cn=contact source, n is the contact order number. No spaces used. Max 12 inputsrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3711.15.1.1.3.7.1 |
rms-cOutput2BooleanInputTn=temperature source, n is one of the following subindex:1->Temp1 LCL,2->Temp1 LWL,
3->Temp1 UWL,4->Temp1 UCL,5->Temp2 LCL,6->Temp2 LWL,7->Temp2 UWL,8->Temp2 UCL.
Cn=contact source, n is the contact order number. No spaces used. Max 12 inputsrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3711.15.1.1.3.7.2 |
rms-cOutput3BooleanInputTn=temperature source, n is one of the following subindex:1->Temp1 LCL,2->Temp1 LWL,
3->Temp1 UWL,4->Temp1 UCL,5->Temp2 LCL,6->Temp2 LWL,7->Temp2 UWL,8->Temp2 UCL.
Cn=contact source, n is the contact order number. No spaces used. Max 12 inputsrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3711.15.1.1.3.7.3 |
rms-cOutput4BooleanInputTn=temperature source, n is one of the following subindex:1->Temp1 LCL,2->Temp1 LWL,
3->Temp1 UWL,4->Temp1 UCL,5->Temp2 LCL,6->Temp2 LWL,7->Temp2 UWL,8->Temp2 UCL.
Cn=contact source, n is the contact order number. No spaces used. Max 12 inputsrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3711.15.1.1.3.7.4 |
rms-cOutputBooleanSelector OBJECT IDENTIFIER .1.3.6.1.4.1.3711.15.1.1.3.8 |
rms-cOutput1BooleanSelectorSet 0 to select OR, and 1 to select ANDrw Enumeration .1.3.6.1.4.1.3711.15.1.1.3.8.1 |
rms-cOutput2BooleanSelectorSet 0 to select OR, and 1 to select ANDrw Enumeration .1.3.6.1.4.1.3711.15.1.1.3.8.2 |
rms-cOutput3BooleanSelectorSet 0 to select OR, and 1 to select ANDrw Enumeration .1.3.6.1.4.1.3711.15.1.1.3.8.3 |
rms-cOutput4BooleanSelectorSet 0 to select OR, and 1 to select ANDrw Enumeration .1.3.6.1.4.1.3711.15.1.1.3.8.4 |
rms-cOutputOFFtoONtraps OBJECT IDENTIFIER .1.3.6.1.4.1.3711.15.1.1.3.9 |
rms-cOutput1OFFtoONtrapSet to 0 for trap disabled, 1 for enabledrw Enumeration .1.3.6.1.4.1.3711.15.1.1.3.9.1 |
rms-cOutput2OFFtoONtrapSet to 0 for trap disabled, 1 for enabledrw Enumeration .1.3.6.1.4.1.3711.15.1.1.3.9.2 |
rms-cOutput3OFFtoONtrapSet to 0 for trap disabled, 1 for enabledrw Enumeration .1.3.6.1.4.1.3711.15.1.1.3.9.3 |
rms-cOutput4OFFtoONtrapSet to 0 for trap disabled, 1 for enabledrw Enumeration .1.3.6.1.4.1.3711.15.1.1.3.9.4 |
rms-cOutputOFFtoONrepeatTimers OBJECT IDENTIFIER .1.3.6.1.4.1.3711.15.1.1.3.10 |
rms-cOutput1OFFtoONrepSet to 0 for no repetion after the first trap is sent, any other integer for the interval in secondsrw INTEGER .1.3.6.1.4.1.3711.15.1.1.3.10.1 |
rms-cOutput2OFFtoONrepSet to 0 for no repetion after the first trap is sent, any other integer for the interval in secondsrw INTEGER .1.3.6.1.4.1.3711.15.1.1.3.10.2 |
rms-cOutput3OFFtoONrepSet to 0 for no repetion after the first trap is sent, any other integer for the interval in secondsrw INTEGER .1.3.6.1.4.1.3711.15.1.1.3.10.3 |
rms-cOutput4OFFtoONrepSet to 0 for no repetion after the first trap is sent, any other integer for the interval in secondsrw INTEGER .1.3.6.1.4.1.3711.15.1.1.3.10.4 |
rms-cOutputONtoOFFtraps OBJECT IDENTIFIER .1.3.6.1.4.1.3711.15.1.1.3.11 |
rms-cOutput1ONtoOFFtrapSet to 0 for trap disabled, 1 for enabledrw Enumeration .1.3.6.1.4.1.3711.15.1.1.3.11.1 |
rms-cOutput2ONtoOFFtrapSet to 0 for trap disabled, 1 for enabledrw Enumeration .1.3.6.1.4.1.3711.15.1.1.3.11.2 |
rms-cOutput3ONtoOFFtrapSet to 0 for trap disabled, 1 for enabledrw Enumeration .1.3.6.1.4.1.3711.15.1.1.3.11.3 |
rms-cOutput4ONtoOFFtrapSet to 0 for trap disabled, 1 for enabledrw Enumeration .1.3.6.1.4.1.3711.15.1.1.3.11.4 |
rms-cOutputONtoOFFrepeatTimers OBJECT IDENTIFIER .1.3.6.1.4.1.3711.15.1.1.3.12 |
rms-cOutput1ONtoOFFrepSet to 0 for no repetion after the first trap is sent, any other integer for the interval in secondsrw INTEGER .1.3.6.1.4.1.3711.15.1.1.3.12.1 |
rms-cOutput2ONtoOFFrepSet to 0 for no repetion after the first trap is sent, any other integer for the interval in secondsrw INTEGER .1.3.6.1.4.1.3711.15.1.1.3.12.2 |
rms-cOutput3ONtoOFFrepSet to 0 for no repetion after the first trap is sent, any other integer for the interval in secondsrw INTEGER .1.3.6.1.4.1.3711.15.1.1.3.12.3 |
rms-cOutput4ONtoOFFrepSet to 0 for no repetion after the first trap is sent, any other integer for the interval in secondsrw INTEGER .1.3.6.1.4.1.3711.15.1.1.3.12.4 |
More MIBs from Sinetica
Browse all SineticaMIBs →HAWK-I2-MIB
The HAWK-I2-MIB facilitates SNMP-based monitoring and management of Sinetica Hawk-i2 hyperspectral imaging sensors, exposing operational status, environmental telemetry, and system health metrics. This module enables administrators to track device availability, sensor performance parameters, and critical hardware conditions within the network infrastructure.
291 objects→
NETCOM-MIB
Standard SNMP MIB module defining data structures for NETCOM-MIB.
56 objects→
RMS-COMPACT-SNMPv1-CONTACT-MIB
Standard SNMP MIB module defining data structures for RMS-COMPACT-SNMPv1-CONTACT-MIB.
22 objects→
RMS-COMPACT-SNMPv1-HUMID2-MIB
Standard SNMP MIB module defining data structures for RMS-COMPACT-SNMPv1-HUMID2-MIB.
15 objects→
RMS-COMPACT-SNMPv1-TEMP2-MIB
Standard SNMP MIB module defining data structures for RMS-COMPACT-SNMPv1-TEMP2-MIB.
15 objects→
RMS-COMPACT-SNMPv1-HUMID1-MIB
Standard SNMP MIB module defining data structures for RMS-COMPACT-SNMPv1-HUMID1-MIB.
15 objects→