HAWK-I2-MIB
AI MIB Summary
The HAWK-I2-MIB facilitates SNMP-based monitoring and management of Sinetica Hawk-i2 hyperspectral imaging sensors, exposing operational status, environmental telemetry, and system health metrics. This module enables administrators to track device availability, sensor performance parameters, and critical hardware conditions within the network infrastructure.
The MIB module for the Sinetica Hawk-i2.
Main OID:
hawki2MIB.1.3.6.1.4.1.3711.24
285
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
285 total| Object Name |
|---|
sinetica OBJECT IDENTIFIER .1.3.6.1.4.1.3711 |
hawki2MIBThe MIB module for the Sinetica Hawk-i2. MODULE-IDENTITY .1.3.6.1.4.1.3711.24 |
traps OBJECT IDENTIFIER .1.3.6.1.4.1.3711.24.0 |
alarmCriticalCritical alarm. NOTIFICATION-TYPE .1.3.6.1.4.1.3711.24.0.1 |
alarmWarningWarning alarm. NOTIFICATION-TYPE .1.3.6.1.4.1.3711.24.0.2 |
alarmInformationInformation alarm. NOTIFICATION-TYPE .1.3.6.1.4.1.3711.24.0.3 |
alarmClearedAlarm cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.3711.24.0.4 |
v1 OBJECT IDENTIFIER .1.3.6.1.4.1.3711.24.1 |
objects OBJECT IDENTIFIER .1.3.6.1.4.1.3711.24.1.1 |
inputs OBJECT IDENTIFIER .1.3.6.1.4.1.3711.24.1.1.1 |
ipCommon OBJECT IDENTIFIER .1.3.6.1.4.1.3711.24.1.1.1.1 |
ipEnable OBJECT IDENTIFIER .1.3.6.1.4.1.3711.24.1.1.1.1.1 |
ipSelectSelects the channel to be enabled or disabled by ipInsert. A value of 0 selects no channel.rw INTEGER .1.3.6.1.4.1.3711.24.1.1.1.1.1.1 |
ipInsertInserts or removes the channel selected by ipSelect - causes an entry for that channel to be created or deleted in the relevant tables. - Read behaviour is undefined.rw InputDataType .1.3.6.1.4.1.3711.24.1.1.1.1.1.2 |
ipTHA OBJECT IDENTIFIER .1.3.6.1.4.1.3711.24.1.1.1.2 |
ipTempScaleFlagTemperature scale (Celsius/Fahrenheit) for temperature monitoring.rw Enumeration .1.3.6.1.4.1.3711.24.1.1.1.2.1 |
ipTHATableA table giving data for all enabled inputs with analogue-type monitoring. SEQUENCE OF IpTHAEntry .1.3.6.1.4.1.3711.24.1.1.1.2.2 |
ipTHAEntryA conceptual row containing information about one analogue-type input. IpTHAEntry .1.3.6.1.4.1.3711.24.1.1.1.2.2.1 |
ipTHAChanThe input number.ro INTEGER .1.3.6.1.4.1.3711.24.1.1.1.2.2.1.1 |
ipTHARSThe analogue-type input table row status.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3711.24.1.1.1.2.2.1.2 |
ipTHANameThe name of this inputrw DisplayString .1.3.6.1.4.1.3711.24.1.1.1.2.2.1.3 |
ipTHALocnA system-defined name for the physical location of this input, e.g. MCU.ro DisplayString .1.3.6.1.4.1.3711.24.1.1.1.2.2.1.4 |
ipTHAAutoDetectIndicates that the type of data this input is monitoring is selected automatically.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3711.24.1.1.1.2.2.1.5 |
ipTHATypeIndicates the type of data this input is monitoring.rw InputDataType .1.3.6.1.4.1.3711.24.1.1.1.2.2.1.6 |
ipTHAValueThe current reading in the relevant measurement units.ro INTEGER (-200..1000) .1.3.6.1.4.1.3711.24.1.1.1.2.2.1.7 |
ipTHAScalingScaling factor for ipTHAValue when ipTHAType=analogue.rw INTEGER .1.3.6.1.4.1.3711.24.1.1.1.2.2.1.8 |
ipTHAOffsetCalibration offset in the same units as for ipTHAValue.rw INTEGER (-100..100) .1.3.6.1.4.1.3711.24.1.1.1.2.2.1.9 |
ipTHAHysteresisHysteresis on threshold levels in the same units as for ipTHAValue.rw INTEGER (-100..100) .1.3.6.1.4.1.3711.24.1.1.1.2.2.1.10 |
ipTHATrapsCfg OBJECT IDENTIFIER .1.3.6.1.4.1.3711.24.1.1.1.2.3 |
ipTHAThreshTableA table listing the trap threshold levels for all enabled inputs with analogue-type monitoring. SEQUENCE OF IpTHAThreshEntry .1.3.6.1.4.1.3711.24.1.1.1.2.3.1 |
ipTHAThreshEntryA conceptual row containing threshold information for one analogue-type input. IpTHAThreshEntry .1.3.6.1.4.1.3711.24.1.1.1.2.3.1.1 |
ipTHAThreshChanThe input number.ro INTEGER .1.3.6.1.4.1.3711.24.1.1.1.2.3.1.1.1 |
ipTHAThreshRSThe analogue-type input table row status.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3711.24.1.1.1.2.3.1.1.2 |
ipTHAUCLThe Upper Critical Limit for this input in the same units as for ipTHAValue.rw INTEGER (-200..1000) .1.3.6.1.4.1.3711.24.1.1.1.2.3.1.1.3 |
ipTHAUWLThe Upper Warning Limit for this input in the same units as for ipTHAValue.rw INTEGER (-200..1000) .1.3.6.1.4.1.3711.24.1.1.1.2.3.1.1.4 |
ipTHALWLThe Lower Warning Limit for this input in the same units as for ipTHAValue.rw INTEGER (-200..1000) .1.3.6.1.4.1.3711.24.1.1.1.2.3.1.1.5 |
ipTHALCLThe Lower Critical Limit for this input in the same units as for ipTHAValue.rw INTEGER (-200..1000) .1.3.6.1.4.1.3711.24.1.1.1.2.3.1.1.6 |
ipTHATrapEnTableThe table that controls trap enabling for all enabled inputs with analogue-type monitoring. SEQUENCE OF IpTHATrapEnEntry .1.3.6.1.4.1.3711.24.1.1.1.2.3.2 |
ipTHATrapEnEntryA conceptual row containing trap enabling information for one analogue-type input. IpTHATrapEnEntry .1.3.6.1.4.1.3711.24.1.1.1.2.3.2.1 |
ipTHATrapEnChanThe input number.ro INTEGER .1.3.6.1.4.1.3711.24.1.1.1.2.3.2.1.1 |
ipTHATrapEnRSThe analogue-type input table row status.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3711.24.1.1.1.2.3.2.1.2 |
ipTHAUCLTrapEnEnables and disables input UCL alarm traps.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3711.24.1.1.1.2.3.2.1.3 |
ipTHAUWLTrapEnEnables and disables input UWL alarm traps.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3711.24.1.1.1.2.3.2.1.4 |
ipTHALWLTrapEnEnables and disables input LWL alarm traps.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3711.24.1.1.1.2.3.2.1.5 |
ipTHALCLTrapEnEnables and disables input LCL alarm traps.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3711.24.1.1.1.2.3.2.1.6 |
ipTHATrapPerTableThe table that controls trap repetition for all enabled inputs with analogue-type monitoring. SEQUENCE OF IpTHATrapPerEntry .1.3.6.1.4.1.3711.24.1.1.1.2.3.3 |
ipTHATrapPerEntryA conceptual row containing trap repetition information for one analogue-type input. IpTHATrapPerEntry .1.3.6.1.4.1.3711.24.1.1.1.2.3.3.1 |
ipTHATrapPerChanThe input number.ro INTEGER .1.3.6.1.4.1.3711.24.1.1.1.2.3.3.1.1 |
ipTHATrapPerRSThe table row status.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3711.24.1.1.1.2.3.3.1.2 |
ipTHATrapUCLPerSet to 0 disables trap repetition, a value of 30 or higher sets the interval between traps in secondsrw INTEGER .1.3.6.1.4.1.3711.24.1.1.1.2.3.3.1.3 |
ipTHATrapUWLPerSet to 0 disables trap repetition, a value of 30 or higher sets the interval between traps in secondsrw INTEGER .1.3.6.1.4.1.3711.24.1.1.1.2.3.3.1.4 |
ipTHATrapLWLPerSet to 0 disables trap repetition, a value of 30 or higher sets the interval between traps in secondsrw INTEGER .1.3.6.1.4.1.3711.24.1.1.1.2.3.3.1.5 |
ipTHATrapLCLPerSet to 0 disables trap repetition, a value of 30 or higher sets the interval between traps in secondsrw INTEGER .1.3.6.1.4.1.3711.24.1.1.1.2.3.3.1.6 |
ipContact OBJECT IDENTIFIER .1.3.6.1.4.1.3711.24.1.1.1.3 |
ipContTableA table listing the parameters and data for all enabled inputs with contact-type monitoring. SEQUENCE OF IpContEntry .1.3.6.1.4.1.3711.24.1.1.1.3.1 |
ipContEntryA conceptual row containing information about one contact input. IpContEntry .1.3.6.1.4.1.3711.24.1.1.1.3.1.1 |
ipContChanThe input number.ro INTEGER .1.3.6.1.4.1.3711.24.1.1.1.3.1.1.1 |
ipContRSThe contact input table row status.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3711.24.1.1.1.3.1.1.2 |
ipContNameThe name of this inputrw DisplayString .1.3.6.1.4.1.3711.24.1.1.1.3.1.1.3 |
ipContLocnA system-defined name for the physical location of this input, e.g. MCU.ro DisplayString .1.3.6.1.4.1.3711.24.1.1.1.3.1.1.4 |
ipContAutoDetectIndicates that the type of data this input is monitoring is selected automatically.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3711.24.1.1.1.3.1.1.5 |
ipContNormStateThe normal state for this contact.rw ContactState .1.3.6.1.4.1.3711.24.1.1.1.3.1.1.6 |
ipContCurrStateThe current state of this contact.ro InputContactState .1.3.6.1.4.1.3711.24.1.1.1.3.1.1.7 |
ipContTrigModeThe contact trigger mode, level, +ve edge, -ve edge.rw Enumeration .1.3.6.1.4.1.3711.24.1.1.1.3.1.1.8 |
ipContResetResets the contact after triggering in edge mode.rw Unsigned32 .1.3.6.1.4.1.3711.24.1.1.1.3.1.1.9 |
ipContTrapEnConfigure contact input traps.rw Enumeration .1.3.6.1.4.1.3711.24.1.1.1.3.1.1.10 |
ipContTrapPeriodSet to 0 disables trap repetition, a value of 30 or higher sets the interval between traps in secondsrw INTEGER .1.3.6.1.4.1.3711.24.1.1.1.3.1.1.11 |
outputs OBJECT IDENTIFIER .1.3.6.1.4.1.3711.24.1.1.2 |
opEnable OBJECT IDENTIFIER .1.3.6.1.4.1.3711.24.1.1.2.1 |
opSelectSelects the channel to be enabled or disabled by opEnable. A value of 0 selects no channel.rw INTEGER .1.3.6.1.4.1.3711.24.1.1.2.1.1 |
opInsertEnables or disables the channel selected by opSelect - causes an entry for that channel to be created or deleted in the relevant tables. - Read behaviour is undefined.rw EnableState .1.3.6.1.4.1.3711.24.1.1.2.1.2 |
opTableA table listing the parameters and data for all outputs that are enabled and available (i.e. its extension unit is connected). SEQUENCE OF OpEntry .1.3.6.1.4.1.3711.24.1.1.2.2 |
opEntryA conceptual row containing information about one output. OpEntry .1.3.6.1.4.1.3711.24.1.1.2.2.1 |
opChanThe output number.ro INTEGER .1.3.6.1.4.1.3711.24.1.1.2.2.1.1 |
opRSThe contact input table row status.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3711.24.1.1.2.2.1.2 |
opNameA user-defined name for this output.rw DisplayString .1.3.6.1.4.1.3711.24.1.1.2.2.1.3 |
opLocnA system-defined name for the physical location of this output, e.g. MCU.ro DisplayString .1.3.6.1.4.1.3711.24.1.1.2.2.1.4 |
opNormStateSets or reads the required normal state of this output.rw RelayState .1.3.6.1.4.1.3711.24.1.1.2.2.1.5 |
opCurrStateReads the current state of this output.ro RelayState .1.3.6.1.4.1.3711.24.1.1.2.2.1.6 |
opOnDelTimeSets the 'on' delay time for this output.rw Unsigned32 .1.3.6.1.4.1.3711.24.1.1.2.2.1.7 |
opOffDelTimeSets the 'off' delay time for this output.rw Unsigned32 .1.3.6.1.4.1.3711.24.1.1.2.2.1.8 |
opBooleanEqnBoolean equation stringrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3711.24.1.1.2.2.1.9 |
opTrapEnConfigure output traps.rw Enumeration .1.3.6.1.4.1.3711.24.1.1.2.2.1.10 |
opTrapPeriodSet to 0 disables trap repetition, a value of 30 or higher sets the interval between traps in secondsrw INTEGER .1.3.6.1.4.1.3711.24.1.1.2.2.1.11 |
opControlStateReads the current control state of an output.rw OutputControlState .1.3.6.1.4.1.3711.24.1.1.2.2.1.12 |
keypads OBJECT IDENTIFIER .1.3.6.1.4.1.3711.24.1.1.4 |
kpEnable OBJECT IDENTIFIER .1.3.6.1.4.1.3711.24.1.1.4.1 |
kpSelectSelects the keypad to be enabled or disabled by kpEnable. A value of 0 selects no keypad.rw INTEGER .1.3.6.1.4.1.3711.24.1.1.4.1.1 |
kpInsertEnables or disables the keypad selected by kpSelect - causes an entry for that keypad to be created or deleted in the relevant tables. - Read behaviour is undefined.rw EnableState .1.3.6.1.4.1.3711.24.1.1.4.1.2 |
kpCtlTableA table listing the parameters and data for the keypads. SEQUENCE OF KpCtlEntry .1.3.6.1.4.1.3711.24.1.1.4.2 |
kpCtlEntryA conceptual row containing information about one keypad. KpCtlEntry .1.3.6.1.4.1.3711.24.1.1.4.2.1 |
kpNumberThe keypad number.ro INTEGER .1.3.6.1.4.1.3711.24.1.1.4.2.1.1 |
kpRSThe keypad table row status.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3711.24.1.1.4.2.1.2 |
kpManufacturerThe name of the manufacturer of the keypad.rw DisplayString .1.3.6.1.4.1.3711.24.1.1.4.2.1.3 |
kpNameA name identifying the keypad.rw DisplayString .1.3.6.1.4.1.3711.24.1.1.4.2.1.4 |
kpDoorLatchTimeOutTime-out value in seconds for which the door latch is held open.rw Unsigned32 .1.3.6.1.4.1.3711.24.1.1.4.2.1.5 |
kpRtnToStndbyTimeOutTime-out value in seconds for Return to Standby Moderw INTEGER .1.3.6.1.4.1.3711.24.1.1.4.2.1.6 |
kpEntryCodeValidSet if previous keypad entry was valid.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3711.24.1.1.4.2.1.7 |
kpDoorOpenTimeOutTime-out value in seconds for Door Open.rw INTEGER .1.3.6.1.4.1.3711.24.1.1.4.2.1.8 |
kpRemoteDoorOpenSet to open the door.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3711.24.1.1.4.2.1.9 |
kpInUseTrapEn'keypad in use' trap enablerw Enumeration .1.3.6.1.4.1.3711.24.1.1.4.2.1.10 |
acus OBJECT IDENTIFIER .1.3.6.1.4.1.3711.24.1.1.5 |
acuEnable OBJECT IDENTIFIER .1.3.6.1.4.1.3711.24.1.1.5.1 |
acuSelectSelects the ACU to be enabled or disabled by acuEnable. A value of 0 selects no ACU.rw INTEGER .1.3.6.1.4.1.3711.24.1.1.5.1.1 |
acuInsertEnables or disables the ACU selected by acuSelect - causes an entry for that ACU to be created or deleted in the relevant tables. - Read behaviour is undefined.rw EnableState .1.3.6.1.4.1.3711.24.1.1.5.1.2 |
acuCtlTableA table listing the parameters and data for the ACUs. SEQUENCE OF AcuCtlEntry .1.3.6.1.4.1.3711.24.1.1.5.2 |
acuCtlEntryA conceptual row containing information about one ACU. AcuCtlEntry .1.3.6.1.4.1.3711.24.1.1.5.2.1 |
acuNumberThe ACU number.ro INTEGER .1.3.6.1.4.1.3711.24.1.1.5.2.1.1 |
acuCtlRSThe ACU table row status.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3711.24.1.1.5.2.1.2 |
acuManufacturerThe name of the manufacturer of the ACU.rw DisplayString .1.3.6.1.4.1.3711.24.1.1.5.2.1.3 |
acuNameA name identifying the ACU.rw DisplayString .1.3.6.1.4.1.3711.24.1.1.5.2.1.4 |
acuDoorLatchTimeOutTime-out value in seconds for which the door latch is held open.rw Unsigned32 .1.3.6.1.4.1.3711.24.1.1.5.2.1.5 |
acuRtnToStndbyTimeOutTime-out value in seconds for Return to Standby Moderw INTEGER .1.3.6.1.4.1.3711.24.1.1.5.2.1.6 |
acuEntryCodeValidSet if previous ACU entry was valid.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3711.24.1.1.5.2.1.7 |
acuDoorOpenTimeOutTime-out value in seconds for Door Open.rw INTEGER .1.3.6.1.4.1.3711.24.1.1.5.2.1.8 |
acuRemoteDoorOpenSet to open the door.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3711.24.1.1.5.2.1.9 |
acuInUseTrapEn'ACU in use' trap enablerw Enumeration .1.3.6.1.4.1.3711.24.1.1.5.2.1.10 |
access OBJECT IDENTIFIER .1.3.6.1.4.1.3711.24.1.1.6 |
accUserCtl OBJECT IDENTIFIER .1.3.6.1.4.1.3711.24.1.1.6.1 |
accUserInstanceA value of 0 causes an access user to be created in the relevant tables. A non-zero value causes the nominated access user table entries to be deleted.rw Unsigned32 .1.3.6.1.4.1.3711.24.1.1.6.1.1 |
accUserTableA table controlling the access users. SEQUENCE OF AccUserEntry .1.3.6.1.4.1.3711.24.1.1.6.1.2 |
accUserEntryA conceptual row containing information about one ACU user. AccUserEntry .1.3.6.1.4.1.3711.24.1.1.6.1.2.1 |
accUserNumberThe the access user-table entry number.ro INTEGER .1.3.6.1.4.1.3711.24.1.1.6.1.2.1.1 |
accUserRSThe access user table row status.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3711.24.1.1.6.1.2.1.2 |
accUserNameA name identifying the access user.rw DisplayString .1.3.6.1.4.1.3711.24.1.1.6.1.2.1.3 |
accUserCodeThe user's access code.rw OCTET STRING .1.3.6.1.4.1.3711.24.1.1.6.1.2.1.4 |
accUserPrivilegesThe ACUs and keypads that the user is allowed to gain access through - comma-separated numerical strings.rw DisplayString .1.3.6.1.4.1.3711.24.1.1.6.1.2.1.5 |
accUserExpiresA text string which specifies when the access code in the row expires. The format is defined by the application.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3711.24.1.1.6.1.2.1.6 |
accUserSetupA free form octet string for programming accUserTable. The format is defined by the application.rw OCTET STRING .1.3.6.1.4.1.3711.24.1.1.6.1.3 |
pdus OBJECT IDENTIFIER .1.3.6.1.4.1.3711.24.1.1.7 |
pduCommon OBJECT IDENTIFIER .1.3.6.1.4.1.3711.24.1.1.7.1 |
pdusEnable OBJECT IDENTIFIER .1.3.6.1.4.1.3711.24.1.1.7.1.1 |
pduSelectSelects the PDU to be enabled or disabled by pduEnable. A value of 0 selects no PDU.rw INTEGER .1.3.6.1.4.1.3711.24.1.1.7.1.1.1 |
pduInsertEnables or disables the PDU selected by pduSelect - causes an entry for that PDU to be created or deleted in the relevant tables. - Read behaviour is undefined.rw EnableState .1.3.6.1.4.1.3711.24.1.1.7.1.1.2 |
pduTableA table containing information about each enabled PDU. SEQUENCE OF PduEntry .1.3.6.1.4.1.3711.24.1.1.7.1.2 |
pduEntryA conceptual row containing information about one PDU. PduEntry .1.3.6.1.4.1.3711.24.1.1.7.1.2.1 |
pduNumberThe PDU number.ro INTEGER .1.3.6.1.4.1.3711.24.1.1.7.1.2.1.1 |
pduRSThe PDU table row status.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3711.24.1.1.7.1.2.1.2 |
pduNameA string identifying the PDU.rw DisplayString .1.3.6.1.4.1.3711.24.1.1.7.1.2.1.3 |
pduOutEnEnables/disables PDU power outlet control - causes an entry for outlets to be created in each relevant PDU table.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3711.24.1.1.7.1.2.1.4 |
pduMonEnEnables/disables PDU power monitoring - causes an entry for monitoring to be created in each relevant PDU table.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3711.24.1.1.7.1.2.1.5 |
pduCommsFailIndicates comms. status for the PDU.ro Enumeration .1.3.6.1.4.1.3711.24.1.1.7.1.2.1.6 |
pduOutlets OBJECT IDENTIFIER .1.3.6.1.4.1.3711.24.1.1.7.2 |
pduOutAll OBJECT IDENTIFIER .1.3.6.1.4.1.3711.24.1.1.7.2.1 |
pduOutCycleAllSets the required state of all power outlets on all connected PDUs.rw Enumeration .1.3.6.1.4.1.3711.24.1.1.7.2.1.1 |
pduOutCycleAllPwdControls access to setting the required state of all power outlets on all connected PDUs.rw DisplayString .1.3.6.1.4.1.3711.24.1.1.7.2.1.2 |
pduOutCycleAllAbortAbort command for pduOutCycleAll.rw Unsigned32 .1.3.6.1.4.1.3711.24.1.1.7.2.1.3 |
pduOutGlobalCycleDelaySets the delay period for pduOutCycleAll and pduOutCycle commands before they start to execute.rw Unsigned32 .1.3.6.1.4.1.3711.24.1.1.7.2.1.4 |
pduOutGlobalRebootTimeSets the off to on delay period for a pdu outlet reboot.rw Unsigned32 .1.3.6.1.4.1.3711.24.1.1.7.2.1.5 |
pduOutGlobalCycleAbortTimeTime delay to abort power outlet setting task.rw Unsigned32 .1.3.6.1.4.1.3711.24.1.1.7.2.1.6 |
pduOutCmnTableA table containing information about the power outlets of all PDUs enabled for outlet control. SEQUENCE OF PduOutCmnEntry .1.3.6.1.4.1.3711.24.1.1.7.2.2 |
pduOutCmnEntryA conceptual row containing information about the power outlets of one PDU. PduOutCmnEntry .1.3.6.1.4.1.3711.24.1.1.7.2.2.1 |
pduOutCmnPduNumberThe PDU number.ro INTEGER .1.3.6.1.4.1.3711.24.1.1.7.2.2.1.1 |
pduOutCmnRSThe PDU table row status.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3711.24.1.1.7.2.2.1.2 |
pduNumOfOutletsThe number of switchable outlets on the PDU - determines the number of entries to be created in the outlet table for the relevant PDU.rw INTEGER .1.3.6.1.4.1.3711.24.1.1.7.2.2.1.3 |
pduOutCycleSets the required state of all power outlets on the PDU.rw Enumeration .1.3.6.1.4.1.3711.24.1.1.7.2.2.1.4 |
pduOutCyclePwdPassword controling access to setting the required state of all power outlets on the PDU.rw DisplayString .1.3.6.1.4.1.3711.24.1.1.7.2.2.1.5 |
pduOutCycleAbortTaskAbort power outlet setting task.rw Unsigned32 .1.3.6.1.4.1.3711.24.1.1.7.2.2.1.6 |
pduOutCycleAbortTimeTime delay to abort power outlet setting task.rw Unsigned32 .1.3.6.1.4.1.3711.24.1.1.7.2.2.1.7 |
pduOutTableA table listing the states and descriptions for each outlet on the PDU. SEQUENCE OF PduOutEntry .1.3.6.1.4.1.3711.24.1.1.7.2.3 |
pduOutEntryA row containing information about one PDU outlet. PduOutEntry .1.3.6.1.4.1.3711.24.1.1.7.2.3.1 |
pduOutPduNumberThe PDU number on which the outlet resides.ro INTEGER .1.3.6.1.4.1.3711.24.1.1.7.2.3.1.1 |
pduOutNumberThe outlet number.ro INTEGER .1.3.6.1.4.1.3711.24.1.1.7.2.3.1.2 |
pduOutRSThe PDU table row status.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3711.24.1.1.7.2.3.1.3 |
pduOutNameA name identifying the outlet.rw DisplayString .1.3.6.1.4.1.3711.24.1.1.7.2.3.1.4 |
pduOutOnThe current state for this outlet.rw Enumeration .1.3.6.1.4.1.3711.24.1.1.7.2.3.1.5 |
pduOutPwdThe password for this outlet.rw DisplayString .1.3.6.1.4.1.3711.24.1.1.7.2.3.1.6 |
pduOutCycleDelayThe on/off delay for this outlet in seconds.ro Unsigned32 .1.3.6.1.4.1.3711.24.1.1.7.2.3.1.7 |
pduOutRebootPeriodThe pduOutOn reboot off period for this outlet in seconds.ro Unsigned32 .1.3.6.1.4.1.3711.24.1.1.7.2.3.1.8 |
pduMonitor OBJECT IDENTIFIER .1.3.6.1.4.1.3711.24.1.1.7.3 |
pduMonTableA table containing monitor information for all PDUs enabled for monitoring. SEQUENCE OF PduMonEntry .1.3.6.1.4.1.3711.24.1.1.7.3.1 |
pduMonEntryA conceptual row containing monitor information for one PDU. PduMonEntry .1.3.6.1.4.1.3711.24.1.1.7.3.1.1 |
pduMonPduNumberThe PDU number.ro INTEGER .1.3.6.1.4.1.3711.24.1.1.7.3.1.1.1 |
pduMonRSThe PDU table row status.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3711.24.1.1.7.3.1.1.2 |
pduRMSVoltsValueRMS Volts value in voltsro INTEGER .1.3.6.1.4.1.3711.24.1.1.7.3.1.1.3 |
pduRMSAmpsValueRMS current value in 0.1 Ampsro INTEGER .1.3.6.1.4.1.3711.24.1.1.7.3.1.1.4 |
pduTotalEnergyValueTotal energy value in 0.1 kWhro INTEGER .1.3.6.1.4.1.3711.24.1.1.7.3.1.1.5 |
pduMeanKVAValueKilo Volt-Amperes value in 0.1 kVAro INTEGER .1.3.6.1.4.1.3711.24.1.1.7.3.1.1.6 |
pduMeanKWattsValueKilo Watts value in 0.1 kWro INTEGER .1.3.6.1.4.1.3711.24.1.1.7.3.1.1.7 |
pduPwrFactorValuePower factor value in 0.01ro INTEGER .1.3.6.1.4.1.3711.24.1.1.7.3.1.1.8 |
pduTrapThreshTableA table containing information about the trap threshold values for all PDUs enabled for monitoring. SEQUENCE OF PduTrapThreshEntry .1.3.6.1.4.1.3711.24.1.1.7.3.2 |
pduTrapThreshEntryA conceptual row containing information about the trap threshold values for one PDU. PduTrapThreshEntry .1.3.6.1.4.1.3711.24.1.1.7.3.2.1 |
pduTrapThreshPduNumberThe PDU number.ro INTEGER .1.3.6.1.4.1.3711.24.1.1.7.3.2.1.1 |
pduTrapThreshRSThe PDU table row status.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3711.24.1.1.7.3.2.1.2 |
pduRMSVoltsUCLrms UCL value in voltsrw INTEGER .1.3.6.1.4.1.3711.24.1.1.7.3.2.1.3 |
pduRMSVoltsUWLrms UWL value in voltsrw INTEGER .1.3.6.1.4.1.3711.24.1.1.7.3.2.1.4 |
pduRMSVoltsLWLrms LWL value in voltsrw INTEGER .1.3.6.1.4.1.3711.24.1.1.7.3.2.1.5 |
pduRMSVoltsLCLrms LCL value in voltsrw INTEGER .1.3.6.1.4.1.3711.24.1.1.7.3.2.1.6 |
pduRMSAmpsUCLrms UCL value in 0.1 ampsrw INTEGER .1.3.6.1.4.1.3711.24.1.1.7.3.2.1.7 |
pduRMSAmpsUWLrms UWL value in 0.1 ampsrw INTEGER .1.3.6.1.4.1.3711.24.1.1.7.3.2.1.8 |
pduRMSAmpsLWLrms LWL value in 0.1 ampsrw INTEGER .1.3.6.1.4.1.3711.24.1.1.7.3.2.1.9 |
pduRMSAmpsLCLrms LCL value in 0.1 ampsrw INTEGER .1.3.6.1.4.1.3711.24.1.1.7.3.2.1.10 |
pduEnergyUCLTotal energy UCL value in 0.1 kWhrw INTEGER .1.3.6.1.4.1.3711.24.1.1.7.3.2.1.11 |
pduEnergyUWLTotal energy UWL value in 0.1 kWhrw INTEGER .1.3.6.1.4.1.3711.24.1.1.7.3.2.1.12 |
pduMeanKVAUCLMean kVA UCL value in 0.1 kVArw INTEGER .1.3.6.1.4.1.3711.24.1.1.7.3.2.1.13 |
pduMeanKVAUWLMean kVA UWL value in 0.1 kVArw INTEGER .1.3.6.1.4.1.3711.24.1.1.7.3.2.1.14 |
pduMeanKVALWLMean kVA LWL value in 0.1 kVArw INTEGER .1.3.6.1.4.1.3711.24.1.1.7.3.2.1.15 |
pduMeanKVALCLMean kVA LCL value in 0.1 kVArw INTEGER .1.3.6.1.4.1.3711.24.1.1.7.3.2.1.16 |
pduMeanKWattsUCLMean power UCL value in 0.1 kWrw INTEGER .1.3.6.1.4.1.3711.24.1.1.7.3.2.1.17 |
pduMeanKWattsUWLMean power UWL value in 0.1 kWrw INTEGER .1.3.6.1.4.1.3711.24.1.1.7.3.2.1.18 |
pduMeanKWattsLWLMean power LWL value in 0.1 kWrw INTEGER .1.3.6.1.4.1.3711.24.1.1.7.3.2.1.19 |
pduMeanKWattsLCLMean power LCL value in 0.1 kWrw INTEGER .1.3.6.1.4.1.3711.24.1.1.7.3.2.1.20 |
pduPwrFactorUCLPower factor UCL value in 0.01rw INTEGER .1.3.6.1.4.1.3711.24.1.1.7.3.2.1.21 |
pduPwrFactorUWLPower factor UWL value in 0.01rw INTEGER .1.3.6.1.4.1.3711.24.1.1.7.3.2.1.22 |
pduPwrFactorLWLPower factor LWL value in 0.01rw INTEGER .1.3.6.1.4.1.3711.24.1.1.7.3.2.1.23 |
pduPwrFactorLCLPower factor LCL value in 0.01rw INTEGER .1.3.6.1.4.1.3711.24.1.1.7.3.2.1.24 |
pduTrapEnTableThe table which controls threshold value trap enabling for all PDUs enabled for monitoring. SEQUENCE OF PduTrapEnEntry .1.3.6.1.4.1.3711.24.1.1.7.3.3 |
pduTrapEnEntryA conceptual row containing information about one PDU. PduTrapEnEntry .1.3.6.1.4.1.3711.24.1.1.7.3.3.1 |
pduTrapEnPduNumberThe PDU number.ro INTEGER .1.3.6.1.4.1.3711.24.1.1.7.3.3.1.1 |
pduTrapEnRSThe PDU table row status.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3711.24.1.1.7.3.3.1.2 |
pduRMSVoltsUCLTrapEnEnables Volts UCL trap.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3711.24.1.1.7.3.3.1.3 |
pduRMSVoltsUWLTrapEnEnables UWL Volts trap.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3711.24.1.1.7.3.3.1.4 |
pduRMSVoltsLWLTrapEnEnables LWL Volts trap.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3711.24.1.1.7.3.3.1.5 |
pduRMSVoltsLCLTrapEnEnables LCL Volts trap.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3711.24.1.1.7.3.3.1.6 |
pduRMSAmpsUCLTrapEnEnables UCL current trap.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3711.24.1.1.7.3.3.1.7 |
pduRMSAmpsUWLTrapEnEnables UWL current trap.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3711.24.1.1.7.3.3.1.8 |
pduRMSAmpsLWLTrapEnEnables LWL current trap.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3711.24.1.1.7.3.3.1.9 |
pduRMSAmpsLCLTrapEnEnables LCL current trap.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3711.24.1.1.7.3.3.1.10 |
pduEnergyUCLTrapEnEnables UCL total energy trap.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3711.24.1.1.7.3.3.1.11 |
pduEnergyUWLTrapEnEnables UWL total energy trap.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3711.24.1.1.7.3.3.1.12 |
pduMeanKVAUCLTrapEnEnables mean kVA UCL trap.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3711.24.1.1.7.3.3.1.13 |
pduMeanKVAUWLTrapEnEnables mean kVA UWL trap.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3711.24.1.1.7.3.3.1.14 |
pduMeanKVALWLTrapEnEnables mean kVA LWL trap.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3711.24.1.1.7.3.3.1.15 |
pduMeanKVALCLTrapEnEnables mean kVA LCL trap.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3711.24.1.1.7.3.3.1.16 |
pduMeanKWattsUCLTrapEnEnables mean power UCL trap.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3711.24.1.1.7.3.3.1.17 |
pduMeanKWattsUWLTrapEnEnables mean power UWL trap.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3711.24.1.1.7.3.3.1.18 |
pduMeanKWattsLWLTrapEnEnables mean power LWL trap.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3711.24.1.1.7.3.3.1.19 |
pduMeanKWattsLCLTrapEnEnables mean power LCL trap.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3711.24.1.1.7.3.3.1.20 |
pduPwrFactorUCLTrapEnEnables power factor UCL trap.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3711.24.1.1.7.3.3.1.21 |
pduPwrFactorUWLTrapEnEnables power factor UWL trap.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3711.24.1.1.7.3.3.1.22 |
pduPwrFactorLWLTrapEnEnables power factor LWL trap.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3711.24.1.1.7.3.3.1.23 |
pduPwrFactorLCLTrapEnEnables power factor LCL trap.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3711.24.1.1.7.3.3.1.24 |
pduTrapPerTableThe table which controls threshold value trap repetition for all PDUs enabled for monitoring. SEQUENCE OF PduTrapPerEntry .1.3.6.1.4.1.3711.24.1.1.7.3.4 |
pduTrapPerEntryA conceptual row containing information about one PDU. PduTrapPerEntry .1.3.6.1.4.1.3711.24.1.1.7.3.4.1 |
pduTrapPduNumberThe PDU number.ro INTEGER .1.3.6.1.4.1.3711.24.1.1.7.3.4.1.1 |
pduTrapPerRSThe PDU table row status.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3711.24.1.1.7.3.4.1.2 |
pduRMSVoltsUCLTrapPerSets UCL Volts trap repeat rate in secondsrw INTEGER .1.3.6.1.4.1.3711.24.1.1.7.3.4.1.3 |
pduRMSVoltsUWLTrapPerSets UWL Volts trap repeat rate in secondsrw INTEGER .1.3.6.1.4.1.3711.24.1.1.7.3.4.1.4 |
pduRMSVoltsLWLTrapPerSets LWL Volts trap repeat rate in secondsrw INTEGER .1.3.6.1.4.1.3711.24.1.1.7.3.4.1.5 |
pduRMSVoltsLCLTrapPerSets LCL Volts trap repeat rate in secondsrw INTEGER .1.3.6.1.4.1.3711.24.1.1.7.3.4.1.6 |
pduRMSAmpsUCLTrapPerSets UCL current trap repeat rate in secondsrw INTEGER .1.3.6.1.4.1.3711.24.1.1.7.3.4.1.7 |
pduRMSAmpsUWLTrapPerSets UWL current trap repeat rate in secondsrw INTEGER .1.3.6.1.4.1.3711.24.1.1.7.3.4.1.8 |
pduRMSAmpsLWLTrapPerSets LWL current trap repeat rate in secondsrw INTEGER .1.3.6.1.4.1.3711.24.1.1.7.3.4.1.9 |
pduRMSAmpsLCLTrapPerSets LCL current trap repeat rate in secondsrw INTEGER .1.3.6.1.4.1.3711.24.1.1.7.3.4.1.10 |
pduEnergyUCLTrapPerSets UCL total energy trap repeat rate in secondsrw INTEGER .1.3.6.1.4.1.3711.24.1.1.7.3.4.1.11 |
pduEnergyUWLTrapPerSets UWL total energy trap repeat rate in secondsrw INTEGER .1.3.6.1.4.1.3711.24.1.1.7.3.4.1.12 |
pduMeanKVAUCLTrapPerSets mean kVA UCL trap repeat rate in secondsrw INTEGER .1.3.6.1.4.1.3711.24.1.1.7.3.4.1.13 |
pduMeanKVAUWLTrapPerSets mean kVA UWL trap repeat rate in secondsrw INTEGER .1.3.6.1.4.1.3711.24.1.1.7.3.4.1.14 |
pduMeanKVALWLTrapPerSets mean kVA LWL trap repeat rate in secondsrw INTEGER .1.3.6.1.4.1.3711.24.1.1.7.3.4.1.15 |
pduMeanKVALCLTrapPerSets mean kVA LCL trap repeat rate in secondsrw INTEGER .1.3.6.1.4.1.3711.24.1.1.7.3.4.1.16 |
pduMeanKWattsUCLTrapPerSets mean power UCL trap repeat rate in secondsrw INTEGER .1.3.6.1.4.1.3711.24.1.1.7.3.4.1.17 |
pduMeanKWattsUWLTrapPerSets mean power UWL trap repeat rate in secondsrw INTEGER .1.3.6.1.4.1.3711.24.1.1.7.3.4.1.18 |
pduMeanKWattsLWLTrapPerSets mean power LWL trap repeat rate in secondsrw INTEGER .1.3.6.1.4.1.3711.24.1.1.7.3.4.1.19 |
pduMeanKWattsLCLTrapPerSets mean power LCL trap repeat rate in secondsrw INTEGER .1.3.6.1.4.1.3711.24.1.1.7.3.4.1.20 |
pduPwrFactorUCLTrapPerSets power factor UCL trap repeat rate in secondsrw INTEGER .1.3.6.1.4.1.3711.24.1.1.7.3.4.1.21 |
pduPwrFactorUWLTrapPerSets power factor UWL trap repeat rate in secondsrw INTEGER .1.3.6.1.4.1.3711.24.1.1.7.3.4.1.22 |
pduPwrFactorLWLTrapPerSets power factor LWL trap repeat rate in secondsrw INTEGER .1.3.6.1.4.1.3711.24.1.1.7.3.4.1.23 |
pduPwrFactorLCLTrapPerSets power factor LCL trap repeat rate in secondsrw INTEGER .1.3.6.1.4.1.3711.24.1.1.7.3.4.1.24 |
inventory OBJECT IDENTIFIER .1.3.6.1.4.1.3711.24.1.1.99 |
invProdSignatureProduct data signature.ro DisplayString .1.3.6.1.4.1.3711.24.1.1.99.1 |
invProdFormatVerProduct data format version.ro DisplayString .1.3.6.1.4.1.3711.24.1.1.99.2 |
invManufCodeManufacturer code.ro DisplayString .1.3.6.1.4.1.3711.24.1.1.99.3 |
invOrderNumOrder number.ro DisplayString .1.3.6.1.4.1.3711.24.1.1.99.4 |
invBatchNumBatch number.ro DisplayString .1.3.6.1.4.1.3711.24.1.1.99.5 |
invProdTestTimeData and time of production test.ro DisplayString .1.3.6.1.4.1.3711.24.1.1.99.6 |
invUnitNameUnit name.ro DisplayString .1.3.6.1.4.1.3711.24.1.1.99.7 |
invUnitPartNumUnit part number.ro DisplayString .1.3.6.1.4.1.3711.24.1.1.99.8 |
invHwRevisionHardware revision number.ro DisplayString .1.3.6.1.4.1.3711.24.1.1.99.9 |
invFwRevisionFirmware revision number.ro DisplayString .1.3.6.1.4.1.3711.24.1.1.99.10 |
invSerialNumSerial number.ro DisplayString .1.3.6.1.4.1.3711.24.1.1.99.11 |
invDefaultIPAddrTypeThe type of the IP addresses.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.3711.24.1.1.99.12 |
invDefaultIPAddrDefault unit IP address.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.3711.24.1.1.99.13 |
invDefaultSubNetMaskDefault unit sub-network mask.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.3711.24.1.1.99.14 |
invDefaultGWAddrDefault unit default gateway address.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.3711.24.1.1.99.15 |
invMacAddrUnit medium access control (MAC) address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.3711.24.1.1.99.16 |
invOkConfirms that the inventory record isn't corrupted.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3711.24.1.1.99.20 |
invInputCountThe maximum number of inputs that can be connected to the unitro INTEGER .1.3.6.1.4.1.3711.24.1.1.99.50 |
invOutputCountThe maximum number of outputs that can be connected to the unitro INTEGER .1.3.6.1.4.1.3711.24.1.1.99.51 |
invKeypadCountThe maximum number of keypads that can be connected to the unitro INTEGER .1.3.6.1.4.1.3711.24.1.1.99.52 |
invAcuCountThe maximum number of ACU's that can be connected to the unitro INTEGER .1.3.6.1.4.1.3711.24.1.1.99.53 |
invAccessUserCountThe maximum number of user entries on the unitro INTEGER .1.3.6.1.4.1.3711.24.1.1.99.54 |
invPduCountThe maximum number of PDU's that can be connected to the unitro INTEGER .1.3.6.1.4.1.3711.24.1.1.99.55 |
trapInfo OBJECT IDENTIFIER .1.3.6.1.4.1.3711.24.1.1.100 |
trapCodeA decimal number to be carried on notifications of types 1 to 4 identifying the event which caused it. The format of this number is BBEEffCCT where BB is the number of the relevant MIB branch. EE indicates what type of event caused the notification. This value is dependent upon branch number and implementation. CC is the channel number which was the source of the notification. T discriminates the type of data, e.g. temperature. This value is dependent upon branch number and implementation. ff future use. Fields are packed with leading zeros and are set to zero if not relevant to a particular notification.ro Unsigned32 .1.3.6.1.4.1.3711.24.1.1.100.1 |
trapDescriptionA string to be carried on notifications of types 1 to 4 identifying the event which caused it. The format of this string is as follows. Field 1 - type of notification, e.g. warning, critical, etc. Field 2 - data source, e.g. inputs. Generally this relates to a particular MIB branch. Field 3 - channel number, e.g. input 1. Field 4 - event, i.e. what caused the trap. Field 5 - value at which the event occured, e.g. 900, indicating 90% humidity. Field 6 - type of data, e.g. relative humidity Fields are omitted if not relevant to a particular notification.ro DisplayString .1.3.6.1.4.1.3711.24.1.1.100.2 |