RFC1285-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
104
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
104 total| Object Name |
|---|
fddi OBJECT IDENTIFIER .1.3.6.1.2.1.10.15 |
RFC1213-MIB Unknown .1.3.6.1.2.1.10.15 |
snmpFddiSMT OBJECT IDENTIFIER .1.3.6.1.2.1.10.15.1 |
snmpFddiSMTNumberThe number of SMT implementations (regardless of
their current state) on this network management
application entity. The value for this variable
must remain constant at least from one re-
initialization of the entity's network management
system to the next re-initialization.ro INTEGER .1.3.6.1.2.1.10.15.1.1 |
snmpFddiSMTTableA list of SMT entries. The number of entries is
given by the value of snmpFddiSMTNumber. SEQUENCE OF SnmpFddiSMTEntry .1.3.6.1.2.1.10.15.1.2 |
snmpFddiSMTEntryAn SMT entry containing information common to a
given SMT. SnmpFddiSMTEntry .1.3.6.1.2.1.10.15.1.2.1 |
snmpFddiSMTIndexA unique value for each SMT. Its value ranges
between 1 and the value of snmpFddiSMTNumber. The
value for each SMT must remain constant at least
from one re-initialization of the entity's network
management system to the next re-initialization.ro INTEGER .1.3.6.1.2.1.10.15.1.2.1.1 |
snmpFddiSMTStationIdUniquely identifies an FDDI station.ro FddiSMTStationIdType -- OCTET STRING .1.3.6.1.2.1.10.15.1.2.1.2 |
snmpFddiSMTOpVersionIdThe version that this station is using for its
operation (refer to ANSI 7.1.2.2).rw INTEGER .1.3.6.1.2.1.10.15.1.2.1.3 |
snmpFddiSMTHiVersionIdThe highest version of SMT that this station
supports (refer to ANSI 7.1.2.2).ro INTEGER .1.3.6.1.2.1.10.15.1.2.1.4 |
snmpFddiSMTLoVersionIdThe lowest version of SMT that this station
supports (refer to ANSI 7.1.2.2).ro INTEGER .1.3.6.1.2.1.10.15.1.2.1.5 |
snmpFddiSMTMACCtThe number of MACs in the station or
concentrator.ro INTEGER .1.3.6.1.2.1.10.15.1.2.1.6 |
snmpFddiSMTNonMasterCtThe number of Non Master PORTs (A, B, or S PORTs)
in the station or concentrator.ro INTEGER .1.3.6.1.2.1.10.15.1.2.1.7 |
snmpFddiSMTMasterCtThe number of Master PORTs in a node. If the
node is not a concentrator, the value is zero.ro INTEGER .1.3.6.1.2.1.10.15.1.2.1.8 |
snmpFddiSMTPathsAvailableA value that indicates the PATH types available
in the station.
The value is a sum. This value initially takes
the value zero, then for each type of PATH that
this node has available, 2 raised to a power is
added to the sum. The powers are according to the
following table:
Path Power
Primary 0
Secondary 1
Local 2
For example, a station having Primary and Local
PATHs available would have a value of 5 (2**0 +
2**2).ro INTEGER .1.3.6.1.2.1.10.15.1.2.1.9 |
snmpFddiSMTConfigCapabilitiesA value that indicates capabilities that are
present in the node. If 'holdAvailable' is
present, this indicates support of the optional
Hold Function (refer to ANSI SMT 9.4.3.2). If
'CF-Wrap-AB' is present, this indicates that the
WRAP_AB state is forced.
The value is a sum. This value initially takes
the value zero, then for each of the configuration
policies currently enforced on the node, 2 raised
to a power is added to the sum. The powers are
according to the following table:
Policy Power
holdAvailable 0
CF-Wrap-AB 1ro INTEGER .1.3.6.1.2.1.10.15.1.2.1.10 |
snmpFddiSMTConfigPolicyA value that indicates the configuration policies
currently enforced in the node (refer to ANSI SMT
9.4.3.2). The 'configurationHold' policy refers
to the Hold flag, and should not be present only
if the Hold function is supported. The 'CF-Wrap-
AB' policy refers to the CF_Wrap_AB flag.
The value is a sum. This value initially takes
the value zero, then for each of the configuration
policies currently enforced on the node, 2 raised
to a power is added to the sum. The powers are
according to the following table:
Policy Power
configurationHold 0
CF-Wrap-AB 1rw INTEGER .1.3.6.1.2.1.10.15.1.2.1.11 |
snmpFddiSMTConnectionPolicyA value that indicates the connection policies
enforced at the station. A station sets the
corresponding policy for each of the connection
types that it rejects. The letter designations, X
and Y, in the 'rejectX-Y' names have the following
significance: X represents the PC-Type of the
local PORT and Y represents a PC-Neighbor in the
evaluation of Connection-Policy (PC-Type, PC-
Neighbor) that is done to determine the setting of
T-Val(3) in the PC-Signaling sequence (refer to
ANSI Section 9.6.3).
The value is a sum. This value initially takes
the value zero, then for each of the connection
policies currently enforced on the node, 2 raised
to a power is added to the sum. The powers are
according to the following table:
Policy Power
rejectA-A 0
rejectA-B 1
rejectA-S 2
rejectA-M 3
rejectB-A 4
rejectB-B 5
rejectB-S 6
rejectB-M 7
rejectS-A 8
rejectS-B 9
rejectS-S 10
rejectS-M 11
rejectM-A 12
rejectM-B 13
rejectM-S 14
rejectM-M 15
Implementors should note that the polarity of
these bits is different in different places in an
SMT system. Implementors should take appropriate
care.rw INTEGER .1.3.6.1.2.1.10.15.1.2.1.12 |
snmpFddiSMTTNotifyThe timer used in the Neighbor Notification
protocol, reported in seconds and ranging from 2
to 30 seconds (refer to ANSI SMT 8.3.1).rw INTEGER .1.3.6.1.2.1.10.15.1.2.1.13 |
snmpFddiSMTStatusReportingIndicates whether the node implements the Status
Reporting Protocol. This object is included for
compatibility with products that were designed
prior to the adoption of this standard.ro Enumeration .1.3.6.1.2.1.10.15.1.2.1.14 |
snmpFddiSMTECMStateIndicates the current state of the ECM state
machine (refer to ANSI SMT 9.5.2).ro Enumeration .1.3.6.1.2.1.10.15.1.2.1.15 |
snmpFddiSMTCFStateThe attachment configuration for the station or
concentrator (refer to ANSI SMT 9.7.4.3).ro Enumeration .1.3.6.1.2.1.10.15.1.2.1.16 |
snmpFddiSMTHoldStateThis value indicates the current state of the
Hold function. The values are determined as
follows: 'holding-prm' is set if the primary ring
is operational and the Recovery Enable Flag is
clear (NOT NO_Flag(primary) AND NOT RE_Flag). is
set if the secondary ring is operational and the
Recovery Enable Flag is clear (NOT
NO_Flag(secondary) AND NOT RE_Flag). Ref 9.4.3.
and 10.3.1. the primary or secondary, i.e., the
Recovery Enable, RE_Flag, is set.ro Enumeration .1.3.6.1.2.1.10.15.1.2.1.17 |
snmpFddiSMTRemoteDisconnectFlagA flag indicating that the station was remotely
disconnected from the network. A station requires
a Connect Action (SM_CM_CONNECT.request (Connect))
to rejoin and clear the flag (refer to ANSI
6.4.5.2).ro Enumeration .1.3.6.1.2.1.10.15.1.2.1.18 |
snmpFddiSMTStationActionThis object, when read, always returns a value of
other(1). The behavior of setting this variable
to each of the acceptable values is as follows:
Other: Results in a badValue error.
Connect: Generates an
SM_CM_Connect.request(connect) signal to CMT
indicating that the ECM State machine is to begin
a connection sequence. The
fddiSMTRemoteDisconnectFlag is cleared on the
setting of this variable to 1. See ANSI Ref
9.3.1.1.
Disconnect: Generates an
SM_CM_Connect.request(disconnect) signal to ECM
and sets the fddiSMTRemoteDisconnectFlag. See
ANSI Ref 9.3.1.1.
Path-Test: Initiates a station path test.
The Path_Test variable (See ANSI Ref. 9.4.1) is
set to Testing. The results of this action are
not specified in this standard.
Self-Test: Initiates a station self test.
The results of this action are not specified in
this standard.
Attempts to set this object to all other values
results in a badValue error. Agents may elect to
return a badValue error on attempts to set this
variable to path-Test(4) or self-Test(5).rw Enumeration .1.3.6.1.2.1.10.15.1.2.1.19 |
snmpFddiMAC OBJECT IDENTIFIER .1.3.6.1.2.1.10.15.2 |
snmpFddiMACNumberThe total number of MAC implementations (across
all SMTs) on this network management application
entity. The value for this variable must remain
constant at least from one re-initialization of
the entity's network management system to the next
re-initialization.ro INTEGER .1.3.6.1.2.1.10.15.2.1 |
snmpFddiMACTableA list of MAC entries. The number of entries is
given by the value of snmpFddiMACNumber. SEQUENCE OF SnmpFddiMACEntry .1.3.6.1.2.1.10.15.2.2 |
snmpFddiMACEntryA MAC entry containing information common to a
given MAC. SnmpFddiMACEntry .1.3.6.1.2.1.10.15.2.2.1 |
snmpFddiMACSMTIndexThe value of the SMT index associated with this
MAC.ro INTEGER .1.3.6.1.2.1.10.15.2.2.1.1 |
snmpFddiMACIndexA unique value for each MAC on the managed
entity. The MAC identified by a particular value
of this index is that identified by the same value
of an ifIndex object instance. That is, if a MAC
is associated with the interface whose value of
ifIndex in the Internet-Standard MIB is equal to
5, then the value of snmpFddiMACIndex shall also
equal 5. The value for each MAC must remain
constant at least from one re-initialization of
the entity's network management system to the next
re-initialization.ro INTEGER .1.3.6.1.2.1.10.15.2.2.1.2 |
snmpFddiMACFrameStatusCapabilitiesA value that indicates the MAC's bridge and end-
station capabilities for operating in a bridged
FDDI network.
The value is a sum. This value initially takes
the value zero, then for each capability present,
2 raised to a power is added to the sum. The
powers are according to the following table:
Capability Power
FSC-Type0 0
FSC-Type1 1
FSC-Type2 2
FSC-Type0-programmable 8
FSC-Type1-programmable 9
FSC-Type2-programmable 10ro INTEGER .1.3.6.1.2.1.10.15.2.2.1.3 |
snmpFddiMACTMaxGreatestLowerBoundThe greatest lower bound of T_Max supported for
this MAC.rw FddiTime .1.3.6.1.2.1.10.15.2.2.1.4 |
snmpFddiMACTVXGreatestLowerBoundThe greatest lower bound of TVX supported for
this MAC.ro FddiTime .1.3.6.1.2.1.10.15.2.2.1.5 |
snmpFddiMACPathsAvailableA value that indicates the PATH types available
for this MAC.
The value is a sum. This value initially takes
the value zero, then for each type of PATH that
this MAC has available, 2 raised to a power is
added to the sum. The powers are according to the
following table:
Path Power
Primary 0
Secondary 1
Local 2ro INTEGER .1.3.6.1.2.1.10.15.2.2.1.6 |
snmpFddiMACCurrentPathIndicates the association of the MAC with a
station PATH.ro Enumeration .1.3.6.1.2.1.10.15.2.2.1.7 |
snmpFddiMACUpstreamNbrThe MAC's upstream neighbor's long individual MAC
address. It may be determined by the Neighbor
Information Frame protocol (refer to ANSI SMT
7.2.1). The value shall be reported as '00 00 00
00 00 00' if it is unknown.ro FddiMACLongAddressType -- OCTET STRING .1.3.6.1.2.1.10.15.2.2.1.8 |
snmpFddiMACOldUpstreamNbrThe previous value of the MAC's upstream
neighbor's long individual MAC address. It may be
determined by the Neighbor Information Frame
protocol (refer to ANSI SMT 7.2.1). The value
shall be reported as '00 00 00 00 00 00' if it is
unknown.ro FddiMACLongAddressType -- OCTET STRING .1.3.6.1.2.1.10.15.2.2.1.9 |
snmpFddiMACDupAddrTestThe Duplicate Address Test flag, Dup_Addr_Test
(refer to ANSI 8.3.1).ro Enumeration .1.3.6.1.2.1.10.15.2.2.1.10 |
snmpFddiMACPathsRequestedA value that indicates PATH(s) desired for this
MAC.
The value is a sum which represents the individual
PATHs that are desired. This value initially
takes the value zero, then for each type of PATH
that this node is, 2 raised to a power is added to
the sum. The powers are according to the
following table:
Path Power
Primary 0
Secondary 1
Local 2
Isolated 3
The precedence order is primary, secondary, local,
and then isolated if multiple PATHs are desired
are set.rw INTEGER .1.3.6.1.2.1.10.15.2.2.1.11 |
snmpFddiMACDownstreamPORTTypeIndicates the PC-Type of the first port that is
downstream of this MAC (the exit port).ro Enumeration .1.3.6.1.2.1.10.15.2.2.1.12 |
snmpFddiMACSMTAddressThe 48 bit individual address of the MAC used for
SMT frames.ro FddiMACLongAddressType -- OCTET STRING .1.3.6.1.2.1.10.15.2.2.1.13 |
snmpFddiMACTReqThe value of T-Req (refer to ANSI MAC 2.2.1 and
ANSI MAC 7.3.5.2).rw FddiTime .1.3.6.1.2.1.10.15.2.2.1.14 |
snmpFddiMACTNegThe value of T-Neg (refer to ANSI MAC 2.2.1 and
ANSI MAC 7.3.5.2).ro FddiTime .1.3.6.1.2.1.10.15.2.2.1.15 |
snmpFddiMACTMaxThe value of T-Max (refer to ANSI MAC 2.2.1 and
ANSI MAC 7.3.5.2).ro FddiTime .1.3.6.1.2.1.10.15.2.2.1.16 |
snmpFddiMACTvxValueThe value of TvxValue (refer to ANSI MAC 2.2.1
and ANSI MAC 7.3.5.2).ro FddiTime .1.3.6.1.2.1.10.15.2.2.1.17 |
snmpFddiMACTMinThe value of T-Min (refer to ANSI MAC 2.2.1 and
ANSI MAC 7.3.5.2).ro FddiTime .1.3.6.1.2.1.10.15.2.2.1.18 |
snmpFddiMACCurrentFrameStatusA value that indicates the MAC's operational
frame status setting functionality.
The value is a sum. This value initially takes
the value zero, then for each functionality
present, 2 raised to a power is added to the sum.
The powers are according to the following table:
Functionality Power
FSC-Type0 0
FSC-Type1 1
FSC-Type2 2rw INTEGER .1.3.6.1.2.1.10.15.2.2.1.19 |
snmpFddiMACFrameCtsFrame_Ct (refer to ANSI MAC 2.2.1).ro Counter .1.3.6.1.2.1.10.15.2.2.1.20 |
snmpFddiMACErrorCtsError_Ct (refer to ANSI MAC 2.2.1).ro Counter .1.3.6.1.2.1.10.15.2.2.1.21 |
snmpFddiMACLostCtsLost_Ct (refer to ANSI MAC 2.2.1).ro Counter .1.3.6.1.2.1.10.15.2.2.1.22 |
snmpFddiMACFrameErrorThresholdA threshold for determining when a MAC Condition
report should be generated. The condition is true
when the ratio, ((delta snmpFddiMACLostCt + delta
snmpFddiMACErrorCt) / (delta snmpFddiMACFrameCt +
delta snmpFddiMACLostCt)) x 2**16. exceeds the
threshold. It is used to determine when a station
has an unacceptable frame error threshold. The
sampling algorithm is implementation dependent.
Any attempt to set this variable to a value of
less than one shall result in a badValue error.
Those who are familiar with the SNMP management
framework will recognize that thresholds are not
in keeping with the SNMP philosophy. However,
this variable is supported by underlying SMT
implementations already and maintaining this
threshold should not pose an undue additional
burden on SNMP agent implementors.ro INTEGER .1.3.6.1.2.1.10.15.2.2.1.23 |
snmpFddiMACFrameErrorRatioThis attribute is the actual ratio, ((delta
snmpFddiMACLostCt + delta snmpFddiMACErrorCt) /
(delta snmpFddiMACFrameCt + delta
snmpFddiMACLostCt)) x 2**16.ro INTEGER .1.3.6.1.2.1.10.15.2.2.1.24 |
snmpFddiMACRMTStateIndicates the current state of the Ring
Management state machine (refer to ANSI Section
10).ro Enumeration .1.3.6.1.2.1.10.15.2.2.1.25 |
snmpFddiMACDaFlagThe RMT flag Duplicate Address Flag, DA_Flag
(refer to ANSI 10.3.1.2).ro Enumeration .1.3.6.1.2.1.10.15.2.2.1.26 |
snmpFddiMACUnaDaFlagA flag set when the upstream neighbor reports a
duplicate address condition. Reset when the
condition clears.ro Enumeration .1.3.6.1.2.1.10.15.2.2.1.27 |
snmpFddiMACFrameConditionIndicates the MAC Condition is active when set.
Cleared when the condition clears and on power
up.ro Enumeration .1.3.6.1.2.1.10.15.2.2.1.28 |
snmpFddiMACChipSetThis object identifies the hardware chip(s) which
is (are) principally responsible for the
implementation of the MAC function. A few OBJECT
IDENTIFIERS are identified elsewhere in this memo.
For those The assignment of additional OBJECT
IDENTIFIERs to various types of hardware chip sets
is managed by the IANA. For example, vendors
whose chip sets are not defined in this memo may
request a number from the Internet Assigned
Numbers Authority (IANA) which indicates the
assignment of a enterprise specific subtree which,
among other things, may be used to allocate OBJECT
IDENTIFIER assignments for that enterprise's chip
sets. Similarly, in the absence of an
appropriately assigned OBJECT IDENTIFIER in this
memo or in an enterprise specific subtree of a
chip vendor, a board or system vendor can request
a number for a subtree from the IANA and make an
appropriate assignment. It is desired that,
whenever possible, the same OBJECT IDENTIFIER be
used for all chips of a given type. Consequently,
the assignment made in this memo for a chip, if
any, should be used in preference to any other
assignment and the assignment made by the chip
manufacturer, if any, should be used in preference
to assignments made by users of those chips. If
the hardware chip set is unknown, the object
identifier
unknownChipSet OBJECT IDENTIFIER ::= { 0 0 }
is returned. Note that unknownChipSet is a
syntactically valid object identifier, and any
conformant implementation of ASN.1 and the BER
must be able to generate and recognize this
value.ro OBJECT IDENTIFIER .1.3.6.1.2.1.10.15.2.2.1.29 |
snmpFddiMACActionThis object, when read, always returns a value of
other(1). The behavior of setting this variable
to each of the acceptable values is as follows:
Other: Results in a badValue
error.
enableLLCService: enables MAC service to
higher layers.
disableLLCService: disables MAC service to
higher layers.
connectMAC: connect this MAC in
station.
disconnectMAC: disconnect this MAC in
station.
Attempts to set this object to all other values
results in a badValue error.rw Enumeration .1.3.6.1.2.1.10.15.2.2.1.30 |
snmpFddiPATH OBJECT IDENTIFIER .1.3.6.1.2.1.10.15.3 |
snmpFddiPORT OBJECT IDENTIFIER .1.3.6.1.2.1.10.15.4 |
snmpFddiPORTNumberThe total number of PORT implementations (across
all SMTs) on this network management application
entity. The value for this variable must remain
constant at least from one re-initialization of
the entity's network management system to the next
re-initialization.ro INTEGER .1.3.6.1.2.1.10.15.4.1 |
snmpFddiPORTTableA list of PORT entries. The number of entries is
given by the value of snmpFddiPORTNumber. SEQUENCE OF SnmpFddiPORTEntry .1.3.6.1.2.1.10.15.4.2 |
snmpFddiPORTEntryA PORT entry containing information common to a
given PORT. SnmpFddiPORTEntry .1.3.6.1.2.1.10.15.4.2.1 |
snmpFddiPORTSMTIndexThe value of the SMT index associated with this
PORT.ro INTEGER .1.3.6.1.2.1.10.15.4.2.1.1 |
snmpFddiPORTIndexA unique value for each PORT within a given SMT.
Its value ranges between 1 and the sum of the
values of snmpFddiSMTNonMasterCt
{ snmpFddiSMTEntry 6 } and snmpFddiSMTMasterCt
{ snmpFddiSMTEntry 7 } on the given SMT. The
value for each PORT must remain constant at least
from one re-initialization of the entity's network
management system to the next re-initialization.ro INTEGER .1.3.6.1.2.1.10.15.4.2.1.2 |
snmpFddiPORTPCTypePC_Type (refer to ANSI SMT 9.2.2 and ANSI SMT
9.6.3.2).ro Enumeration .1.3.6.1.2.1.10.15.4.2.1.3 |
snmpFddiPORTPCNeighborThe type (PC_Neighbor) of the remote PORT that is
determined in PC_Signaling in R_Val (1,2) (refer
to ANSI SMT 9.6.3.2).ro Enumeration .1.3.6.1.2.1.10.15.4.2.1.4 |
snmpFddiPORTConnectionPoliciesA value that indicates the node's PORT policies.
Pc-MAC-LCT, Pc-MAC-Loop, and Pc-MAC-Placement
indicate how the respective PC Signaling
Capability flags should be set (refer to ANSI SMT
9.4.3.2).
The value is a sum. This value initially takes
the value zero, then for each PORT policy, 2
raised to a power is added to the sum. The powers
are according to the following table:
Policy Power
Pc-MAC-LCT 0
Pc-MAC-Loop 1
Pc-MAC-Placement 2rw INTEGER .1.3.6.1.2.1.10.15.4.2.1.5 |
snmpFddiPORTRemoteMACIndicatedThe indication, in PC-Signaling that the remote
partner intends to place a MAC in the output token
PATH of this PORT. Signaled as R_Val (9) (refer
to ANSI SMT 9.6.3.2).ro Enumeration .1.3.6.1.2.1.10.15.4.2.1.6 |
snmpFddiPORTCEStateIndicates the current state of PORT's
Configuration Element (CE) (refer to ANSI 9.7.5).
Note that this value represents the Current Path
information for this PORT.ro Enumeration .1.3.6.1.2.1.10.15.4.2.1.7 |
snmpFddiPORTPathsRequestedA value that indicates the desired association(s)
of the port with a station PATH. The 'Primary'
Path is the default. The value of 'Secondary' is
only meaningful for S (slave) or M (master) PORT
PC-Types. This value effects the setting of the
CF_Insert_S, and CF_Insert_L flags (refer to ANSI
Section 9.4.3). If the 'Primary' PATH is present,
then the Primary PATH (the default PATH) is
selected. If the 'Secondary' PATH is present and
the 'Primary' PATH is not present, then the
CF_Insert_S flag is set. If the 'Local' PATH is
sent and neither the 'Primary' or 'Secondary'
PATHs are sent, then the CF_Insert_L flag is set.
The value is a sum. This value initially takes
the value zero, then for each type of PATH
desired, 2 raised to a power is added to the sum.
The powers are according to the following table:
Path Power
Primary 0
Secondary 1
Local 2
Isolated 3rw INTEGER .1.3.6.1.2.1.10.15.4.2.1.8 |
snmpFddiPORTMACPlacementIndicates the upstream MAC, if any, that is
associated with the PORT. The value shall be zero
if there is no MAC associated with the PORT.
Otherwise, the value shall be equal to the value
of snmpFddiMACIndex associated with the MAC.ro FddiResourceId -- INTEGER .1.3.6.1.2.1.10.15.4.2.1.9 |
snmpFddiPORTAvailablePathsA value that indicates the PATH types available
for M and S PORTs.
The value is a sum. This value initially takes
the value zero, then for each type of PATH that
this port has available, 2 raised to a power is
added to the sum. The powers are according to the
following table:
Path Power
Primary 0
Secondary 1
Local 2ro INTEGER .1.3.6.1.2.1.10.15.4.2.1.10 |
snmpFddiPORTMACLoopTimeTime for the optional MAC Local Loop, T_Next(9),
which is greater-than or equal-to 200 milliseconds
(refer to ANSI SMT 9.4.4.2.3).rw FddiTime .1.3.6.1.2.1.10.15.4.2.1.11 |
snmpFddiPORTTBMaxTB_Max (refer to ANSI SMT 9.4.4.2.1).rw FddiTime .1.3.6.1.2.1.10.15.4.2.1.12 |
snmpFddiPORTBSFlagThe Break State, BS_Flag (refer to ANSI SMT
9.4.3.4).ro Enumeration .1.3.6.1.2.1.10.15.4.2.1.13 |
snmpFddiPORTLCTFailCtsThe count of the consecutive times the link
confidence test (LCT) has failed during connection
management (refer to ANSI 9.4.1).ro Counter .1.3.6.1.2.1.10.15.4.2.1.14 |
snmpFddiPORTLerEstimateA long term average link error rate. It ranges
from 10**-4 to 10**-15 and is reported as the
absolute value of the exponent of the estimate.ro INTEGER .1.3.6.1.2.1.10.15.4.2.1.15 |
snmpFddiPORTLemRejectCtsA link error monitoring count of the times that a
link has been rejected.ro Counter .1.3.6.1.2.1.10.15.4.2.1.16 |
snmpFddiPORTLemCtsThe aggregate link error monitor error count, set
to zero only on station power_up.ro Counter .1.3.6.1.2.1.10.15.4.2.1.17 |
snmpFddiPORTLerCutoffThe link error rate estimate at which a link
connection will be broken. It ranges from 10**-4
to 10**-15 and is reported as the absolute value
of the exponent.rw INTEGER .1.3.6.1.2.1.10.15.4.2.1.18 |
snmpFddiPORTLerAlarmThe link error rate estimate at which a link
connection will generate an alarm. It ranges from
10**-4 to 10**-15 and is reported as the absolute
value of the exponent of the estimate.rw INTEGER .1.3.6.1.2.1.10.15.4.2.1.19 |
snmpFddiPORTConnectStateAn indication of the connect state of this PORT.
Basically, this gives a higher level view of the
state of the connection by grouping PCM states and
the PC-Withhold flag state. The supported values
and their corresponding PCM states and PC-Withhold
condition, when relevant, are:
disabled: (PC0:Off, PC9:Maint)
connecting: (PC1(Break) || PC3 (Connect) || PC4
(Next) || PC5 (Signal) || PC6
(Join) || PC7 (Verify)) &&
(PC_Withhold = None)
standby: (NOT PC_Withhold == None)
active: (PC2:Trace || PC8:Active)ro Enumeration .1.3.6.1.2.1.10.15.4.2.1.20 |
snmpFddiPORTPCMState(refer to SMT 9.6.2).ro Enumeration .1.3.6.1.2.1.10.15.4.2.1.21 |
snmpFddiPORTPCWithholdPC_Withhold, (refer to ANSI SMT 9.4.1).ro Enumeration .1.3.6.1.2.1.10.15.4.2.1.22 |
snmpFddiPORTLerConditionThis variable is set to true whenever LerEstimate
is less than or equal to LerAlarm.ro Enumeration .1.3.6.1.2.1.10.15.4.2.1.23 |
snmpFddiPORTChipSetThis object identifies the hardware chip(s) which
is (are) principally responsible for the
implementation of the PORT (PHY) function. A few
OBJECT IDENTIFIERS are identified elsewhere in
this memo. For those The assignment of additional
OBJECT IDENTIFIERs to various types of hardware
chip sets is managed by the IANA. For example,
vendors whose chip sets are not defined in this
memo may request a number from the Internet
Assigned Numbers Authority (IANA) which indicates
the assignment of a enterprise specific subtree
which, among other things, may be used to allocate
OBJECT IDENTIFIER assignments for that
enterprise's chip sets. Similarly, in the absence
of an appropriately assigned OBJECT IDENTIFIER in
this memo or in an enterprise specific subtree of
a chip vendor, a board or system vendor can
request a number for a subtree from the IANA and
make an appropriate assignment. It is desired
that, whenever possible, the same OBJECT
IDENTIFIER be used for all chips of a given type.
Consequently, the assignment made in this memo for
a chip, if any, should be used in preference to
any other assignment and the assignment made by
the chip manufacturer, if any, should be used in
preference to assignments made by users of those
chips. If the hardware chip set is unknown, the
object identifier
unknownChipSet OBJECT IDENTIFIER ::= { 0 0 }
is returned. Note that unknownChipSet is a
syntactically valid object identifier, and any
conformant implementation of ASN.1 and the BER
must be able to generate and recognize this
value.ro OBJECT IDENTIFIER .1.3.6.1.2.1.10.15.4.2.1.24 |
snmpFddiPORTActionThis object, when read, always returns a value of
other(1). The behavior of setting this variable
to each of the acceptable values is as follows:
Other: Results in a badValue error.
maintPORT: Signal PC_Maint
enablePORT: Signal PC_Enable
disablePORT: Signal PC_Disable
startPORT: Signal PC_Start
stopPORT: Signal PC_Stop
Signals cause an SM_CM_CONTROL.request service to
be generated with a control_action of `Signal' and
the `variable' parameter set with the appropriate
value (i.e., PC_Maint, PC_Enable, PC_Disable,
PC_Start, PC_Stop). Ref. ANSI SMT Section 9.3.2.
Attempts to set this object to all other values
results in a badValue error.rw Enumeration .1.3.6.1.2.1.10.15.4.2.1.25 |
snmpFddiATTACHMENT OBJECT IDENTIFIER .1.3.6.1.2.1.10.15.5 |
snmpFddiATTACHMENTNumberThe total number of attachments (across all SMTs)
on this network management application entity.
The value for this variable must remain constant
at least from one re-initialization of the
entity's network management system to the next
re-initialization.ro INTEGER .1.3.6.1.2.1.10.15.5.1 |
snmpFddiATTACHMENTTableA list of ATTACHMENT entries. The number of
entries is given by the value of
snmpFddiATTACHMENTNumber. SEQUENCE OF SnmpFddiATTACHMENTEntry .1.3.6.1.2.1.10.15.5.2 |
snmpFddiATTACHMENTEntryAn ATTACHMENT entry containing information common
to a given set of ATTACHMENTs.
The ATTACHMENT Resource represents a PORT or a
pair of PORTs plus the optional associated optical
bypass that are managed as a functional unit.
Because of its relationship to the PORT Objects,
there is a natural association of ATTACHMENT
Resource Indices to the PORT Indices. The
resource index for the ATTACHMENT is equal to the
associated PORT index for 'single-attachment' and
'concentrator' type snmpFddiATTACHMENTClasses.
For 'dual-attachment' Classes, the ATTACHMENT
Index is the PORT Index of the A PORT of the A/B
PORT Pair that represents the ATTACHMENT. SnmpFddiATTACHMENTEntry .1.3.6.1.2.1.10.15.5.2.1 |
snmpFddiATTACHMENTSMTIndexThe value of the SMT index associated with this
ATTACHMENT.ro INTEGER .1.3.6.1.2.1.10.15.5.2.1.1 |
snmpFddiATTACHMENTIndexA unique value for each ATTACHMENT on a given
SMT. Its value ranges between 1 and the sum of
the values of snmpFddiSMTNonMasterCt {
snmpFddiSMTEntry 6 } and snmpFddiSMTMasterCt {
snmpFddiSMTEntry 7 } on the given SMT. The value
for each ATTACHMENT must remain constant at least
from one re-initialization of the entity's network
management system to the next re-initialization.ro INTEGER .1.3.6.1.2.1.10.15.5.2.1.2 |
snmpFddiATTACHMENTClassThe Attachment class. This represents a PORT or
a pair of PORTs plus the associated optional
optical bypass that are managed as a functional
unit. The PORT associations are the following:
single-attachment - S PORTs
dual-attachment - A/B PORT Pairs
concentrator - M PORTsro Enumeration .1.3.6.1.2.1.10.15.5.2.1.3 |
snmpFddiATTACHMENTOpticalBypassPresentThe value of this value is false for 'single-
attachment' and { snmpFddiATTACHMENT 11 }.
Correct operation of CMT for single-attachment and
concentrator attachments requires that a bypass
function must not loopback the network side of the
MIC, but only the node side.ro Enumeration .1.3.6.1.2.1.10.15.5.2.1.4 |
snmpFddiATTACHMENTIMaxExpirationI_Max (refer to ANSI SMT 9.4.4.2.1). It is
recognized that some currently deployed systems do
not implement an optical bypass. Systems which do
not implement optical bypass should return a value
of 0.ro FddiTime .1.3.6.1.2.1.10.15.5.2.1.5 |
snmpFddiATTACHMENTInsertedStatusIndicates whether the attachment is currently
inserted in the node.ro Enumeration .1.3.6.1.2.1.10.15.5.2.1.6 |
snmpFddiATTACHMENTInsertPolicyIndicates the Insert Policy for this Attachment.
Insert: True (1), Don't Insert: False (2),
Unimplemented (3)rw Enumeration .1.3.6.1.2.1.10.15.5.2.1.7 |
snmpFddiChipSets OBJECT IDENTIFIER .1.3.6.1.2.1.10.15.6 |
snmpFddiPHYChipSets OBJECT IDENTIFIER .1.3.6.1.2.1.10.15.6.1 |
snmpFddiMACChipSets OBJECT IDENTIFIER .1.3.6.1.2.1.10.15.6.2 |
snmpFddiPHYMACChipSets OBJECT IDENTIFIER .1.3.6.1.2.1.10.15.6.3 |