RFC1230-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
59
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
59 total| Object Name |
|---|
dot4 OBJECT IDENTIFIER .1.3.6.1.3.7 |
RFC1155-SMI Unknown .1.3.6.1.3.7 |
dot4TableThis table contains Token Bus interface
parameters and state variables, one entry
per 802.5 interface. SEQUENCE OF Dot4Entry .1.3.6.1.3.7.1 |
dot4EntryA list of Token Bus status and operational
parameter values for an 802.4 interface. Dot4Entry .1.3.6.1.3.7.1.1 |
dot4IfIndexThe value of this object identifies the
802.4 interface for which this entry
contains management information. The
value of this object for a particular
interface has the same value as the
ifIndex object, defined in [4,6], for the
same interface.ro INTEGER .1.3.6.1.3.7.1.1.1 |
dot4OptionsThe optional parts of the 802.4
specification which are in use by this
station. The options of the 802.4
specification are represented by the
following values:
1 - Priority
2 - Request-With-Response
The value of this object is given by the
sum of the above representations for
those options in use on this interface.
The value zero indicates that no options
are in use.ro INTEGER .1.3.6.1.3.7.1.1.2 |
dot4StateThe current state of the 802.4
interface. The value of other(1) is
used if the state is unknown
(e.g., due to an error condition).ro Enumeration .1.3.6.1.3.7.1.1.3 |
dot4CommandsSetting this object causes the station
to change the state of the interface as
indicated by the specified value. An
initialize(5) command causes the
interfaceto load its operational
parameters from its initialization
parameters; the value of
dot4InitInRingDesired determines
whether the station tries to enter the
logical ring immediately.
Note that the 802.4 specification
suggests a station remain Offline after a
'remote Network Management' reset(4),
until a 'local Network Management'
initialize(5) is performed.
Setting this object to a value of
no-op(1) has no effect. When read,
this object always has the value no-op(1).rw Enumeration .1.3.6.1.3.7.1.1.4 |
dot4MacAddrLenThis object indicates the size of MAC
addresses interpreted by this station.ro Enumeration .1.3.6.1.3.7.1.1.5 |
dot4NextStationThe MAC address of this station's
successor in the logical ring.ro MacAddress (SNMPv2-TC) .1.3.6.1.3.7.1.1.6 |
dot4PreviousStationThe source MAC address of the last token
addressed to this station.ro MacAddress (SNMPv2-TC) .1.3.6.1.3.7.1.1.7 |
dot4SlotTimeThe maximum time any station need wait
for an immediate MAC-level response from
another station.
This value must the same in all stations on
the 802.4 network.ro OctetTime .1.3.6.1.3.7.1.1.8 |
dot4LastTokenRotTimeThe observed token rotation time for the
last token rotation, timed from token
arrival to token arrival. A value of
zero indicates that the token is not
rotating.ro OctetTime .1.3.6.1.3.7.1.1.9 |
dot4HiPriTokenHoldTimeThe maximum duration for which a station
can hold the token to transmit frames of
access class 6 (if the priority option is
implemented), or of any access class (if
the priority option is not implemented).ro OctetTime .1.3.6.1.3.7.1.1.10 |
dot4TargetRotTimeClass4If the priority scheme is being used,
this value specifies a limit on how long
a station can transmit frames at access
class 4. The limit is measured from the
time the station is able to start
transmitting frames at this access class
on one rotation, to the time it must stop
transmitting frames at this access class
on the next rotation. If the priority
scheme is not being used, this object has
the value 0.ro OctetTime .1.3.6.1.3.7.1.1.11 |
dot4TargetRotTimeClass2If the priority scheme is being used,
this value specifies a limit on how long
a station can transmit frames at access
class 2. The limit is measured from the
time the station is able to start
transmitting frames at this access
class on one rotation, to the time it
must stop transmitting frames at this
access class on the next rotation. If
the priority scheme is not being used,
this object has the value 0.ro OctetTime .1.3.6.1.3.7.1.1.12 |
dot4TargetRotTimeClass0If the priority scheme is being used,
this value specifies a limit on how long
a station can transmit frames at access
class 0. The limit is measured from the
time the station is able to start
transmitting frames at this access
class on one rotation, to the time it
must stop transmitting frames at this
access class on the next rotation. If
the priority scheme is not being used,
this object has the value 0.ro OctetTime .1.3.6.1.3.7.1.1.13 |
dot4TargetRotTimeRingMaintA value used to limit the duration of a
token rotation. If the duration of a
token rotation exceeds this value, the
station will not open the response window
to solicit for a new successor.ro OctetTime .1.3.6.1.3.7.1.1.14 |
dot4RingMaintTimerInitValueThe value to which the
dot4TargetRotTimeRingMaint is set, each
time the station enters the ring.
A large value will cause the station to
solicit successors immediately upon entry
to the ring; a value of zero will cause
the station to defer this solicitation
for at least one token rotation.ro OctetTime .1.3.6.1.3.7.1.1.15 |
dot4MaxInterSolicitCountThe maximum number of consecutive token
rotations without soliciting for a
successor. If this count expires, the
station opens the response window to
solicit for a successor (providing the
duration of the current token rotation
has not exceeded
dot4TargetRotTimeRingMaint). The least
significant two bits of the count are
determined randomly by the station on a
per-use basis.ro INTEGER .1.3.6.1.3.7.1.1.16 |
dot4MaxRetriesThe maximum number of retries of a
Request-with-Response (RWR) frame. If
the RWR option is not in use, this object
has the value 0.ro INTEGER .1.3.6.1.3.7.1.1.17 |
dot4MinPostSilencePreambLenThe minimum number of octets of preamble
on the first frame transmitted by this
station after a period of 'transmitted'
silence.ro INTEGER .1.3.6.1.3.7.1.1.18 |
dot4StandardRevisionThe Revision number of the 802.4 standard
implemented by this station.ro Enumeration .1.3.6.1.3.7.1.1.19 |
dot4InitTableThis table contains Token Bus
initialization parameters, one entry per
802.4 interface. SEQUENCE OF Dot4InitEntry .1.3.6.1.3.7.2 |
dot4InitEntryA list of Token Bus initialization
parameters for an 802.4 interface. Dot4InitEntry .1.3.6.1.3.7.2.1 |
dot4InitIfIndexThe value of this object identifies the
802.4 interface for which this entry
contains management information. The
value of this object for a particular
interface has the same value as the
ifIndex object, defined in [4,6], for
the same interface.ro INTEGER .1.3.6.1.3.7.2.1.1 |
dot4InitSlotTimeThe value assigned to the object
dot4SlotTime when the station is
initialized.rw OctetTime .1.3.6.1.3.7.2.1.2 |
dot4InitMaxInterSolicitCountThe value assigned to the object
dot4MaxInterSolicitCount when the station
is initialized.rw INTEGER .1.3.6.1.3.7.2.1.3 |
dot4InitMaxRetriesThe value assigned to the object
dot4MaxRetries when the station is
initialized.rw INTEGER .1.3.6.1.3.7.2.1.4 |
dot4InitHiPriTokenHoldTimeThe value assigned to the object
dot4HiPriTokenHoldTime when the station
is initialized.rw OctetTime .1.3.6.1.3.7.2.1.5 |
dot4InitTargetRotTimeClass4The value assigned to the object
dot4TargetRotTimeClass4 when the station
is initialized.rw OctetTime .1.3.6.1.3.7.2.1.6 |
dot4InitTargetRotTimeClass2The value assigned to the object
dot4TargetRotTimeClass2 when the station
is initialized.rw OctetTime .1.3.6.1.3.7.2.1.7 |
dot4InitTargetRotTimeClass0The value assigned to the object
dot4TargetRotTimeClass0 when the station
is initialized.rw OctetTime .1.3.6.1.3.7.2.1.8 |
dot4InitTargetRotTimeRingMaintThe value assigned to the object
dot4TargetRotTimeRingMaint when the station
is initialized.rw OctetTime .1.3.6.1.3.7.2.1.9 |
dot4InitRingMaintTimerInitValueThe value assigned to the object
dot4RingMaintTimerInitValue when the
station is initialized.rw OctetTime .1.3.6.1.3.7.2.1.10 |
dot4InitMinPostSilencePreambLenThe value assigned to the object
dot4MinPostSilencePreambLen when the
station is initialized.rw INTEGER .1.3.6.1.3.7.2.1.11 |
dot4InitInRingDesiredThis object determines whether the
station will attempt to enter the logical
ring immediately after initialization.rw Enumeration .1.3.6.1.3.7.2.1.12 |
dot4StatsTableA table containing Token Bus statistics.
All the statistics are defined using the
syntax Counter as 32 bit wrap around
counters. Thus, if an interface's
hardware chip set maintains these
statistics in 16-bit counters, then the
agent must read the hardware's counters
frequently enough to prevent loss of
significance, in order to maintain
a 32-bit counter in software. SEQUENCE OF Dot4StatsEntry .1.3.6.1.3.7.3 |
dot4StatsEntryAn entry containing the 802.4 statistics
for a particular interface. Dot4StatsEntry .1.3.6.1.3.7.3.1 |
dot4StatsIfIndexThe value of this object identifies the
802.4 interface for which this entry
contains management information. The
value of this object for a particular
interface has the same value as the
ifIndex object, defined in [4,6], for the
same interface.ro INTEGER .1.3.6.1.3.7.3.1.1 |
dot4StatsTokenPassesThe number of times this station has
passed the token.ro Counter .1.3.6.1.3.7.3.1.2 |
dot4StatsTokenHeardsThe number of tokens heard by this
station.ro Counter .1.3.6.1.3.7.3.1.3 |
dot4StatsNoSuccessorsThe number of times the station could
not find a successor while believing
itself not the only station in the ring.
This can signify a faulty transmitter
condition in this station.ro Counter .1.3.6.1.3.7.3.1.4 |
dot4StatsWhoFollowsThe number of times the station has had
to look for a new next station.ro Counter .1.3.6.1.3.7.3.1.5 |
dot4StatsTokenPassFailsThe number of times the station failed in
passing the token to the next station.ro Counter .1.3.6.1.3.7.3.1.6 |
dot4StatsNonSilencesThe number of occurrences of non-silence
followed by silence in which a start
delimiter was not detected.ro Counter .1.3.6.1.3.7.3.1.7 |
dot4StatsFcsErrorsThe number of frames received with an
incorrect FCS and the E-bit reset.ro Counter .1.3.6.1.3.7.3.1.8 |
dot4StatsEbitErrorsThe number of frames the station
received with the E-bit set in the
end delimiter.ro Counter .1.3.6.1.3.7.3.1.9 |
dot4StatsFrameFragsThe number of occurrences of receiving a
start delimiter followed by another start
delimiter, an invalid symbol sequence or
silence, without an intervening end
delimiter.ro Counter .1.3.6.1.3.7.3.1.10 |
dot4StatsFrameTooLongsThe number of frames that were received
that were larger than the media's MTU.ro Counter .1.3.6.1.3.7.3.1.11 |
dot4StatsOverRunsThe number of times a FIFO overrun was
detected in the station.ro Counter .1.3.6.1.3.7.3.1.12 |
dot4StatsDupAddressesThe number of times this station
detected another station using the same
MAC address.ro Counter .1.3.6.1.3.7.3.1.13 |
dot4Errors OBJECT IDENTIFIER .1.3.6.1.3.7.4 |
dot4ModemInitFailed OBJECT IDENTIFIER .1.3.6.1.3.7.4.1 |
dot4Tests OBJECT IDENTIFIER .1.3.6.1.3.7.5 |
testFifoPath OBJECT IDENTIFIER .1.3.6.1.3.7.5.1 |
testExternalLoopback OBJECT IDENTIFIER .1.3.6.1.3.7.5.2 |
dot4ChipSets OBJECT IDENTIFIER .1.3.6.1.3.7.6 |
chipSetMc68824 OBJECT IDENTIFIER .1.3.6.1.3.7.6.1 |