REDSTONE-SONET-MIB
Imported Objects
Objects
13 total| Object Name |
|---|
rsSonetMIBThe SONET MIB for the Redstone Communications Inc. enterprise. MODULE-IDENTITY .1.3.6.1.4.1.2773.2.7 |
rsSonetObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2773.2.7.1 |
rsSonetMediumTableThis table contains entries for SONET interfaces present in the system. SEQUENCE OF RsSonetMediumEntry .1.3.6.1.4.1.2773.2.7.1.1 |
rsSonetMediumEntryEach entry describes the characteristics of an SONET interface. RsSonetMediumEntry .1.3.6.1.4.1.2773.2.7.1.1.1 |
rsSonetMediumTypeThis variable identifies whether a SONET or a SDH signal is used across this interface.rw Enumeration .1.3.6.1.4.1.2773.2.7.1.1.1.1 |
rsSonetMediumLoopbackConfigThe current loopback state of the SONET/SDH interface. The values mean: sonetNoLoop Not in the loopback state. A device that is not capable of performing a loopback on this interface shall always return this value. sonetFacilityLoop The received signal at this interface is looped back out through the corresponding transmitter in the return direction. sonetTerminalLoop The signal that is about to be transmitted is connected to the associated incoming receiver. sonetOtherLoop Loopbacks that are not defined here.rw Enumeration .1.3.6.1.4.1.2773.2.7.1.1.1.2 |
rsSonetMediumTimingSourceSelects the source from which transmit timing is derived. loop(1) indicates timing is recovered from the receiver; internal(2) indicates timing is taken from the internal system timing reference.rw Enumeration .1.3.6.1.4.1.2773.2.7.1.1.1.3 |
rsSonetMediumCircuitIdentifierThis variable contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting.rw DisplayString .1.3.6.1.4.1.2773.2.7.1.1.1.4 |
rsSonetConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2773.2.7.4 |
rsSonetCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2773.2.7.4.1 |
rsSonetComplianceThe compliance statement for entities which implement the Redstone SONET MIB. Unknown .1.3.6.1.4.1.2773.2.7.4.1.1 |
rsSonetGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2773.2.7.4.2 |
rsSonetGroupA collection of objects providing management of SONET interfaces in a Redstone product. Unknown .1.3.6.1.4.1.2773.2.7.4.2.1 |
More MIBs from Redstone
Browse all RedstoneMIBs →The REDSTONE-PPP-MIB provides vendor-specific management objects for monitoring Point-to-Point Protocol (PPP) interface states, session statistics, and error counters on Redstone Communications Inc. hardware. This module enables the tracking of link establishment failures, authentication status, and data throughput metrics specific to Redstone's PPP implementations.
The REDSTONE-FRAME-RELAY-MIB enables monitoring and management of Frame Relay interface statistics, DLCI status, and traffic counters on Redstone Communications Inc. networking hardware. This module provides standard SNMP access to Layer 2 Frame Relay protocol states and performance metrics specific to the vendor's equipment.
The REDSTONE-RADIUS-CLIENT-MIB enables monitoring and management of Redstone Communications RADIUS client instances, specifically tracking authentication session states, request/reply counters, and client connectivity status for enterprise AAA infrastructure.
SNMP MIB module
SNMP MIB module
The REDSTONE-ATM-MIB provides vendor-specific management interfaces for Redstone Communications ATM switches, enabling the monitoring of Asynchronous Transfer Mode cell traffic statistics, interface status, and virtual circuit configurations. This module facilitates the collection of standard ATM performance counters and error metrics required for troubleshooting and capacity planning within Redstone ATM network infrastructure.