REDSTONE-IP-POLICY-MIB
The IP Policy MIB for the Redstone Communications Inc. enterprise.
Main OID:
rsIpPolicyMIB.1.3.6.1.4.1.2773.2.13
19
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
19 total| Object Name |
|---|
rsIpPolicyMIBThe IP Policy MIB for the Redstone Communications Inc. enterprise. MODULE-IDENTITY .1.3.6.1.4.1.2773.2.13 |
rsIpPolicyObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2773.2.13.1 |
rsIpAccessList OBJECT IDENTIFIER .1.3.6.1.4.1.2773.2.13.1.1 |
rsIpAccessListTableThis table contains entries for elements of IP access lists. Entries belonging to the same access list are ordered, and comparisons to those entries are performed in that order until a match is detected. If no match is found, the default action is to 'deny'. SEQUENCE OF RsIpAccessListEntry .1.3.6.1.4.1.2773.2.13.1.1.1 |
rsIpAccessListEntryEach entry describes the characteristics of an IP access list element. RsIpAccessListEntry .1.3.6.1.4.1.2773.2.13.1.1.1.1 |
rsIpAccessListIdThe number of the access list to which this entry belongs. Integer32 .1.3.6.1.4.1.2773.2.13.1.1.1.1.1 |
rsIpAccessListElemIdThe relative position of this entry within its access list. Access list entries are searched in this sequence (low to high values) until a match is found. NOTE: The value zero is reserved for use with SET operations to perform special-purpose table entry creations/deletions; see the DESCRIPTION of rsIpAccessListRowStatus for details. Get/GetNext/GetBulk retrievals never return an entry for which this object is zero-valued. Integer32 .1.3.6.1.4.1.2773.2.13.1.1.1.1.2 |
rsIpAccessListRowStatusControls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy Two configuration levels are defined, limited and full. EARLY IMPLEMENTATIONS MIGHT PROVIDE ONLY THE LIMITED LEVEL OF CONFIGURATION CAPABILITY. *** LIMITED ACCESS LIST CONFIGURATION LEVEL *** 1) RowStatus createAndGo/destroy operations directed to a target table entry for which rsIpAccessListElemId is ZERO, have the following special-purpose semantics: createAndGo Create an entry having the specified configuration and append it to the target list, i.e. assign it a value of rsIpAccessListElemId that is one greater than the current last element in the list. destroy Destroy the specified list and all of its constituent elements. 2) RowStatus createAndGo/destroy operations directed to a target table entry for which rsIpAccessListElemId is NONZERO are disallowed. *** FULL ACCESS LIST CONFIGURATION LEVEL *** Permit conventional RowStatus-based management of table entries having a nonzero value for rsIpAccessListElemId, IN ADDITION TO the special RowStatus semantics applied to entries having a zero value for rsIpAccessListElemId. To create an entry in this table, the following entry objects MUST be explicitly configured: rsIpAccessListRowStatus In addition, when creating an entry the following conditions must hold: The value of rsIpAccessListElemId is nonzero. Once created, element attributes cannot be modified except by a RowStatus destroy operation to delete the list element.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2773.2.13.1.1.1.1.3 |
rsIpAccessListActionSpecifies the disposition of an item that matches the comparison criteria described by this entry.rw Enumeration .1.3.6.1.4.1.2773.2.13.1.1.1.1.4 |
rsIpAccessListSrcA source IP address. A subject IP address is first masked with the value of rsIpAccessListSrcMask, then the result is compared to this value. Setting both this object and its corresponding mask to 0.0.0.0 acts as a wildcard, matching any source IP address.rw IpAddress .1.3.6.1.4.1.2773.2.13.1.1.1.1.5 |
rsIpAccessListSrcMaskThe IP address mask to be applied to a subject source IP address before comparing it to rsIpAccessListSrc. Ones in the mask identify which bits in the subject IP address are significant for the comparison. To be considered valid, a nonzero value for this object must contain a single contiguous string of ones, beginning with the most significant bit of the mask.rw IpAddress .1.3.6.1.4.1.2773.2.13.1.1.1.1.6 |
rsIpAccessListDstA destination IP address. A subject IP address is first masked with the value of rsIpAccessListDstMask, then the result is compared to this value. Setting both this object and its corresponding mask to 0.0.0.0 acts as a wildcard, matching any destination IP address.rw IpAddress .1.3.6.1.4.1.2773.2.13.1.1.1.1.7 |
rsIpAccessListDstMaskThe IP address mask to be applied to a subject destination IP address before comparing it to rsIpAccessListDst. Ones in the mask identify which bits in the IP address are significant for the comparison. To be considered valid, a nonzero value for this object must contain a single contiguous string of ones, beginning with the most significant bit of the mask.rw IpAddress .1.3.6.1.4.1.2773.2.13.1.1.1.1.8 |
rsIpAccessListProtocolAn IP Protocol value. Nonzero values match a specific IP Protocol value (e.g. 6 for TCP) carried in an IP packet; a value of zero acts as a wildcard, matching any IP Protocol.rw Integer32 .1.3.6.1.4.1.2773.2.13.1.1.1.1.9 |
rsIpPolicyConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2773.2.13.4 |
rsIpPolicyCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2773.2.13.4.1 |
rsIpPolicyComplianceThe compliance statement for entities which implement the Redstone IP Policy MIB. Unknown .1.3.6.1.4.1.2773.2.13.4.1.1 |
rsIpPolicyGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2773.2.13.4.2 |
rsIpAccessListGroupA collection of objects for managing IP access list capabilities in a Redstone product. Unknown .1.3.6.1.4.1.2773.2.13.4.2.1 |